-
Notifications
You must be signed in to change notification settings - Fork 472
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
5 different MPU9250 and not a single one 100% working (broken axis) #475
Comments
Not sure what you mean here by one axis not working.
So you are getting data from one or two accel axes, lets say, but what no
data from the z-axis means all zeroes or can't read the register or what?
…On Mon, Mar 7, 2022 at 11:22 PM simkard69 ***@***.***> wrote:
Hello everyone,
I'm tryting to get this lib working, and I think it does pretty well
except the fact that when I'm trying to read from each sensor I have (4x
GY-91 and 1x GY-9250), not a single one seems to give 3 working axis for
Accel and/or Gyro.
The 3 magnetometer axis are systematically ok (maybe much more resistant
than the ones from accel/gyro).
I always get 1 axis or 2 not working per sensor on accel and/or gyro ...
very frustrating.
Can someone help me out with those ? maybe it's just a calibration problem
... or maybe these sensors are just 5h177y ones systematically ?
Thanks
—
Reply to this email directly, view it on GitHub
<#475>, or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ABTDLKS4RVAKTQUHXNZ73A3U63543ANCNFSM5QFQKA7Q>
.
Triage notifications on the go with GitHub Mobile for iOS
<https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675>
or Android
<https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>.
You are receiving this because you are subscribed to this thread.Message
ID: ***@***.***>
|
hi! i have the same problem, bought 4 mpu9250 and none of them works... some axis gives frozen data |
These either work or they don't. If you are getting reasonable data from
one of the six sensor axes and "frozen" data from the other axes then the
device is fubar.
Unless you have "fixed" the sketches somehow...
Take a look at the raw register bytes to see if these are changing or not.
If the register bytes do not change even as you move the sensor around the
devices are broken and should be thrown away.
I am not surprised that this is happening more now when the MPU9250 has
been out of production for more than two years and people are selling all
of their stale, crappy inventory.
…On Fri, Apr 8, 2022 at 10:14 AM puredirect ***@***.***> wrote:
hi! i have the same problem, bought 4 mpu9250 and none of them works...
some axis gives frozen data
have you solved the issue?
please write ***@***.***
—
Reply to this email directly, view it on GitHub
<#475 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ABTDLKQDG7TIHYB6EGBUF2LVEBSPNANCNFSM5QFQKA7Q>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Thank you! I bought the 4th one from TME and it is not even initializing…. Why i cant find any information abot this scam…. Pls tell me what to buy. I would like to by a good gyro. With a good library…
Az iPhone-omról küldve
… 2022. ápr. 8. dátummal, 19:22 időpontban Kris Winer ***@***.***> írta:
These either work or they don't. If you are getting reasonable data from
one of the six sensor axes and "frozen" data from the other axes then the
device is fubar.
Unless you have "fixed" the sketches somehow...
Take a look at the raw register bytes to see if these are changing or not.
If the register bytes do not change even as you move the sensor around the
devices are broken and should be thrown away.
I am not surprised that this is happening more now when the MPU9250 has
been out of production for more than two years and people are selling all
of their stale, crappy inventory.
On Fri, Apr 8, 2022 at 10:14 AM puredirect ***@***.***> wrote:
> hi! i have the same problem, bought 4 mpu9250 and none of them works...
> some axis gives frozen data
> have you solved the issue?
> please write ***@***.***
>
> —
> Reply to this email directly, view it on GitHub
> <#475 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/ABTDLKQDG7TIHYB6EGBUF2LVEBSPNANCNFSM5QFQKA7Q>
> .
> You are receiving this because you commented.Message ID:
> ***@***.***>
>
—
Reply to this email directly, view it on GitHub, or unsubscribe.
You are receiving this because you commented.
|
ST's 6 DoF IMUs like the LSM6DSM, LSM6DSR are very good (better than
MPU6500), and there are breakouts
<https://www.tindie.com/products/onehorse/all-st-motion-sensor-breakout-board/>
available.
Invensense ICM42688 is pretty good too if you can find a breakout. Add a
good magnetometer like the MMC5983 and you would have a much better
replacement for the MPU9250.
There are also IMUs that do the fusion for you. This
<https://www.tindie.com/products/onehorse/usfsmax-module-and-carrier/> is
superbly accurate.
…On Sun, Apr 10, 2022 at 3:46 AM puredirect ***@***.***> wrote:
Thank you! I bought the 4th one from TME and it is not even initializing….
Why i cant find any information abot this scam…. Pls tell me what to buy. I
would like to by a good gyro. With a good library…
Az iPhone-omról küldve
> 2022. ápr. 8. dátummal, 19:22 időpontban Kris Winer ***@***.***> írta:
>
>
> These either work or they don't. If you are getting reasonable data from
> one of the six sensor axes and "frozen" data from the other axes then the
> device is fubar.
>
> Unless you have "fixed" the sketches somehow...
>
> Take a look at the raw register bytes to see if these are changing or
not.
> If the register bytes do not change even as you move the sensor around
the
> devices are broken and should be thrown away.
>
> I am not surprised that this is happening more now when the MPU9250 has
> been out of production for more than two years and people are selling all
> of their stale, crappy inventory.
>
> On Fri, Apr 8, 2022 at 10:14 AM puredirect ***@***.***> wrote:
>
> > hi! i have the same problem, bought 4 mpu9250 and none of them works...
> > some axis gives frozen data
> > have you solved the issue?
> > please write ***@***.***
> >
> > —
> > Reply to this email directly, view it on GitHub
> > <
#475 (comment)>,
> > or unsubscribe
> > <
https://github.com/notifications/unsubscribe-auth/ABTDLKQDG7TIHYB6EGBUF2LVEBSPNANCNFSM5QFQKA7Q
>
> > .
> > You are receiving this because you commented.Message ID:
> > ***@***.***>
> >
> —
> Reply to this email directly, view it on GitHub, or unsubscribe.
> You are receiving this because you commented.
—
Reply to this email directly, view it on GitHub
<#475 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/ABTDLKQTXXUXLUF4IRRLIUTVEKWQPANCNFSM5QFQKA7Q>
.
You are receiving this because you commented.Message ID:
***@***.***>
|
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Hello everyone,
I'm tryting to get this lib working, and I think it does pretty well except the fact that when I'm trying to read from each sensor I have (4x GY-91 and 1x GY-9250), not a single one seems to give 3 working axis for Accel and/or Gyro.
The 3 magnetometer axis are systematically ok (maybe much more resistant than the ones from accel/gyro).
I always get 1 axis or 2 not working per sensor on accel and/or gyro ... very frustrating.
Can someone help me out with those ? maybe it's just a calibration problem ... or maybe these sensors are just 5h177y ones systematically ?
Thanks
The text was updated successfully, but these errors were encountered: