share large scale test result(20K volumes)

[andyzhangx]

I did large scale test in a k8s cluster with 5K, 10K, 20K CSI volumes created using following component versions:

• csi-provisioner:v2.1.0
• csi-attacher:v2.2.0
• csi-resizer:v1.1.0

cpu limit is set as 100m for every sidecar containers which is enough, while memory limit should be adjusted according to volume num, if memory limit is small, driver would be OOMKilled, here are my suggested memory limit per volume num which survived(no crash) in the large scale test(actually I increase the memory 100Mi each time in load test which could get an relatively accurate memory limit)

• 5K volumes: 200Mi
• 10K volumes: 400Mi
• 20K volumes: 800Mi

The above test result shows if there are 5K*n volumes, memory limit should set as 200Mi * n

[fejta-bot]

Issues go stale after 90d of inactivity.
Mark the issue as fresh with /remove-lifecycle stale.
Stale issues rot after an additional 30d of inactivity and eventually close.

If this issue is safe to close now please do so with /close.

Send feedback to sig-contributor-experience at kubernetes/community.
/lifecycle stale

[andyzhangx]

/remove-lifecycle stale

[k8s-triage-robot]

The Kubernetes project currently lacks enough contributors to adequately respond to all issues and PRs.

This bot triages issues and PRs according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Mark this issue or PR as fresh with /remove-lifecycle stale
• Mark this issue or PR as rotten with /lifecycle rotten
• Close this issue or PR with /close
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle stale

[k8s-triage-robot]

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages issues and PRs according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Mark this issue or PR as fresh with /remove-lifecycle rotten
• Close this issue or PR with /close
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle rotten

[k8s-triage-robot]

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages issues and PRs according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Reopen this issue or PR with /reopen
• Mark this issue or PR as fresh with /remove-lifecycle rotten
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/close

[k8s-ci-robot]

@k8s-triage-robot: Closing this issue.

In response to this:

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages issues and PRs according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Reopen this issue or PR with /reopen
• Mark this issue or PR as fresh with /remove-lifecycle rotten
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/close

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository.

[andyzhangx]

/reopen

[k8s-ci-robot]

@andyzhangx: Reopened this issue.

In response to this:

/reopen

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository.

[andyzhangx]

the memory issue may exist here, following call would list all PVCs in one call without paging, when there are thousands of PVCs, there is memory issue:

external-provisioner/pkg/controller/clone_controller.go

Lines 175 to 179 in 94ee0be

	// Checking for PVCs in the same namespace to have other states aside from Pending, which means that cloning is still in progress
	pvcList, err := p.claimLister.PersistentVolumeClaims(claim.Namespace).List(labels.Everything())
	if err != nil {
	return err
	}

there is ListOptions.Limit property, we could leverage this to do paging list to save memory:
https://github.com/kubernetes/kubernetes/blob/25a25e27a9bcb903ef5a74ae5dd92946d2dbd913/staging/src/k8s.io/apimachinery/pkg/apis/meta/v1/types.go#L371-L402

Update(2024/7/22):
ListOptions.Limit property cannot be used in the above PersistentVolumeClaims(claim.Namespace).List() func

[andyzhangx]

/remove-lifecycle rotten

[k8s-triage-robot]

The Kubernetes project currently lacks enough contributors to adequately respond to all issues.

This bot triages un-triaged issues according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Mark this issue as fresh with /remove-lifecycle stale
• Close this issue with /close
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle stale

[andyzhangx]

/remove-lifecycle stale

[k8s-triage-robot]

The Kubernetes project currently lacks enough contributors to adequately respond to all issues.

This bot triages un-triaged issues according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Mark this issue as fresh with /remove-lifecycle stale
• Close this issue with /close
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle stale

[k8s-triage-robot]

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues.

This bot triages un-triaged issues according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Mark this issue as fresh with /remove-lifecycle rotten
• Close this issue with /close
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle rotten

[k8s-triage-robot]

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages issues according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Reopen this issue with /reopen
• Mark this issue as fresh with /remove-lifecycle rotten
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/close not-planned

[k8s-ci-robot]

@k8s-triage-robot: Closing this issue, marking it as "Not Planned".

In response to this:

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages issues according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Reopen this issue with /reopen
• Mark this issue as fresh with /remove-lifecycle rotten
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/close not-planned

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository.

[andyzhangx]

/reopen

[k8s-ci-robot]

@andyzhangx: Reopened this issue.

In response to this:

/reopen

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository.

[k8s-triage-robot]

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages issues according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Reopen this issue with /reopen
• Mark this issue as fresh with /remove-lifecycle rotten
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/close not-planned

[k8s-ci-robot]

@k8s-triage-robot: Closing this issue, marking it as "Not Planned".

In response to this:

The Kubernetes project currently lacks enough active contributors to adequately respond to all issues and PRs.

This bot triages issues according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Reopen this issue with /reopen
• Mark this issue as fresh with /remove-lifecycle rotten
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/close not-planned

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository.

[andyzhangx]

/reopen
/remove-lifecycle rotten

[k8s-ci-robot]

@andyzhangx: Reopened this issue.

In response to this:

/reopen
/remove-lifecycle rotten

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes-sigs/prow repository.

[andyzhangx]

/kind feature

[k8s-triage-robot]

The Kubernetes project currently lacks enough contributors to adequately respond to all issues.

This bot triages un-triaged issues according to the following rules:

• After 90d of inactivity, lifecycle/stale is applied
• After 30d of inactivity since lifecycle/stale was applied, lifecycle/rotten is applied
• After 30d of inactivity since lifecycle/rotten was applied, the issue is closed

You can:

• Mark this issue as fresh with /remove-lifecycle stale
• Close this issue with /close
• Offer to help out with Issue Triage

Please send feedback to sig-contributor-experience at kubernetes/community.

/lifecycle stale