diff --git a/api/leaderworkerset/v1/leaderworkerset_types.go b/api/leaderworkerset/v1/leaderworkerset_types.go index 78f239fd..418d10e3 100644 --- a/api/leaderworkerset/v1/leaderworkerset_types.go +++ b/api/leaderworkerset/v1/leaderworkerset_types.go @@ -110,9 +110,10 @@ type LeaderWorkerSetSpec struct { // +optional RolloutStrategy RolloutStrategy `json:"rolloutStrategy,omitempty"` - // StartupPolicy defines the startup policy for the leader/worker statefulset. - // +kubebuilder:default=Default - // +kubebuilder:validation:Enum={Default,WaitForLeaderReady} + // StartupPolicy determines the startup policy for the worker statefulset. + // +kubebuilder:default=LeaderCreated + // +kubebuilder:validation:Enum={LeaderCreated,LeaderReady} + // +optional StartupPolicy StartupPolicyType `json:"startupPolicy"` } @@ -235,12 +236,11 @@ const ( type StartupPolicyType string const ( - // WaitForLeaderReady will create worker statefulset after the leader is ready. - WaitForLeaderReady StartupPolicyType = "WaitForLeaderReady" + // LeaderReady creates the workers statefulset after the leader pod is ready. + LeaderReadyStartupPolicy StartupPolicyType = "LeaderReady" - // Default will create worker statefulset immediately when pod controller receives - // the leader pod created event. - DefaultStartupPolicy StartupPolicyType = "Default" + // LeaderCreated creates the workers statefulset immediately after the leader pod is created. + LeaderCreatedStartupPolicy StartupPolicyType = "LeaderCreated" ) // LeaderWorkerSetStatus defines the observed state of LeaderWorkerSet diff --git a/config/crd/bases/leaderworkerset.x-k8s.io_leaderworkersets.yaml b/config/crd/bases/leaderworkerset.x-k8s.io_leaderworkersets.yaml index 9bd071f6..2da0b1cc 100644 --- a/config/crd/bases/leaderworkerset.x-k8s.io_leaderworkersets.yaml +++ b/config/crd/bases/leaderworkerset.x-k8s.io_leaderworkersets.yaml @@ -12,8786 +12,7042 @@ spec: listKind: LeaderWorkerSetList plural: leaderworkersets shortNames: - - lws + - lws singular: leaderworkerset scope: Namespaced versions: - - name: v1 - schema: - openAPIV3Schema: - description: LeaderWorkerSet is the Schema for the leaderworkersets API - properties: - apiVersion: - description: |- - APIVersion defines the versioned schema of this representation of an object. - Servers should convert recognized schemas to the latest internal value, and - may reject unrecognized values. - More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources - type: string - kind: - description: |- - Kind is a string value representing the REST resource this object represents. - Servers may infer this from the endpoint the client submits requests to. - Cannot be updated. - In CamelCase. - More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds - type: string - metadata: - type: object - spec: - description: |- - One group consists of a single leader and M workers, and the total number of pods in a group is M+1. - LeaderWorkerSet will create N replicas of leader-worker pod groups (hereinafter referred to as group). - - - Each group has a unique index between 0 and N-1. We call this the leaderIndex. - The leaderIndex is used to uniquely name the leader pod of each group in the following format: - leaderWorkerSetName-leaderIndex. This is considered as the name of the group too. - - - Each worker pod in the group has a unique workerIndex between 1 and M. The leader also - gets a workerIndex, and it is always set to 0. - Worker pods are named using the format: leaderWorkerSetName-leaderIndex-workerIndex. - properties: - leaderWorkerTemplate: - description: - LeaderWorkerTemplate defines the template for leader/worker - pods - properties: - leaderTemplate: - description: - LeaderTemplate defines the pod template for leader - pods. - properties: - metadata: - description: |- - Standard object's metadata. - More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata - properties: - annotations: - additionalProperties: - type: string - type: object - finalizers: - items: - type: string - type: array - labels: - additionalProperties: - type: string - type: object - name: + - name: v1 + schema: + openAPIV3Schema: + description: LeaderWorkerSet is the Schema for the leaderworkersets API + properties: + apiVersion: + description: |- + APIVersion defines the versioned schema of this representation of an object. + Servers should convert recognized schemas to the latest internal value, and + may reject unrecognized values. + More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources + type: string + kind: + description: |- + Kind is a string value representing the REST resource this object represents. + Servers may infer this from the endpoint the client submits requests to. + Cannot be updated. + In CamelCase. + More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#types-kinds + type: string + metadata: + type: object + spec: + description: |- + One group consists of a single leader and M workers, and the total number of pods in a group is M+1. + LeaderWorkerSet will create N replicas of leader-worker pod groups (hereinafter referred to as group). + + + Each group has a unique index between 0 and N-1. We call this the leaderIndex. + The leaderIndex is used to uniquely name the leader pod of each group in the following format: + leaderWorkerSetName-leaderIndex. This is considered as the name of the group too. + + + Each worker pod in the group has a unique workerIndex between 1 and M. The leader also + gets a workerIndex, and it is always set to 0. + Worker pods are named using the format: leaderWorkerSetName-leaderIndex-workerIndex. + properties: + leaderWorkerTemplate: + description: LeaderWorkerTemplate defines the template for leader/worker + pods + properties: + leaderTemplate: + description: LeaderTemplate defines the pod template for leader + pods. + properties: + metadata: + description: |- + Standard object's metadata. + More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata + properties: + annotations: + additionalProperties: type: string - namespace: + type: object + finalizers: + items: type: string - type: object - spec: - description: |- - Specification of the desired behavior of the pod. - More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status - properties: - activeDeadlineSeconds: - description: |- - Optional duration in seconds the pod may be active on the node relative to - StartTime before the system will actively try to mark it failed and kill associated containers. - Value must be a positive integer. - format: int64 - type: integer - affinity: - description: If specified, the pod's scheduling constraints - properties: - nodeAffinity: - description: - Describes node affinity scheduling rules - for the pod. - properties: - ? preferredDuringSchedulingIgnoredDuringExecution - : description: |- - The scheduler will prefer to schedule pods to nodes that satisfy - the affinity expressions specified by this field, but it may choose - a node that violates one or more of the expressions. The node that is - most preferred is the one with the greatest sum of weights, i.e. - for each node that meets all of the scheduling requirements (resource - request, requiredDuringScheduling affinity expressions, etc.), - compute a sum by iterating through the elements of this field and adding - "weight" to the sum if the node matches the corresponding matchExpressions; the - node(s) with the highest sum are the most preferred. - items: - description: |- - An empty preferred scheduling term matches all objects with implicit weight 0 - (i.e. it's a no-op). A null preferred scheduling term matches no objects (i.e. is also a no-op). - properties: - preference: - description: - A node selector term, associated - with the corresponding weight. - properties: - matchExpressions: - description: - A list of node selector - requirements by node's labels. - items: - description: |- - A node selector requirement is a selector that contains values, a key, and an operator - that relates the key and values. - properties: - key: - description: - The label key that - the selector applies to. + type: array + labels: + additionalProperties: + type: string + type: object + name: + type: string + namespace: + type: string + type: object + spec: + description: |- + Specification of the desired behavior of the pod. + More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status + properties: + activeDeadlineSeconds: + description: |- + Optional duration in seconds the pod may be active on the node relative to + StartTime before the system will actively try to mark it failed and kill associated containers. + Value must be a positive integer. + format: int64 + type: integer + affinity: + description: If specified, the pod's scheduling constraints + properties: + nodeAffinity: + description: Describes node affinity scheduling rules + for the pod. + properties: + preferredDuringSchedulingIgnoredDuringExecution: + description: |- + The scheduler will prefer to schedule pods to nodes that satisfy + the affinity expressions specified by this field, but it may choose + a node that violates one or more of the expressions. The node that is + most preferred is the one with the greatest sum of weights, i.e. + for each node that meets all of the scheduling requirements (resource + request, requiredDuringScheduling affinity expressions, etc.), + compute a sum by iterating through the elements of this field and adding + "weight" to the sum if the node matches the corresponding matchExpressions; the + node(s) with the highest sum are the most preferred. + items: + description: |- + An empty preferred scheduling term matches all objects with implicit weight 0 + (i.e. it's a no-op). A null preferred scheduling term matches no objects (i.e. is also a no-op). + properties: + preference: + description: A node selector term, associated + with the corresponding weight. + properties: + matchExpressions: + description: A list of node selector + requirements by node's labels. + items: + description: |- + A node selector requirement is a selector that contains values, a key, and an operator + that relates the key and values. + properties: + key: + description: The label key that + the selector applies to. + type: string + operator: + description: |- + Represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt. + type: string + values: + description: |- + An array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. If the operator is Gt or Lt, the values + array must have a single element, which will be interpreted as an integer. + This array is replaced during a strategic merge patch. + items: type: string - operator: - description: |- - Represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt. + type: array + required: + - key + - operator + type: object + type: array + matchFields: + description: A list of node selector + requirements by node's fields. + items: + description: |- + A node selector requirement is a selector that contains values, a key, and an operator + that relates the key and values. + properties: + key: + description: The label key that + the selector applies to. + type: string + operator: + description: |- + Represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt. + type: string + values: + description: |- + An array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. If the operator is Gt or Lt, the values + array must have a single element, which will be interpreted as an integer. + This array is replaced during a strategic merge patch. + items: type: string - values: - description: |- - An array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. If the operator is Gt or Lt, the values - array must have a single element, which will be interpreted as an integer. - This array is replaced during a strategic merge patch. - items: - type: string - type: array - required: - - key - - operator - type: object - type: array - matchFields: - description: - A list of node selector - requirements by node's fields. - items: - description: |- - A node selector requirement is a selector that contains values, a key, and an operator - that relates the key and values. - properties: - key: - description: - The label key that - the selector applies to. + type: array + required: + - key + - operator + type: object + type: array + type: object + x-kubernetes-map-type: atomic + weight: + description: Weight associated with matching + the corresponding nodeSelectorTerm, in + the range 1-100. + format: int32 + type: integer + required: + - preference + - weight + type: object + type: array + requiredDuringSchedulingIgnoredDuringExecution: + description: |- + If the affinity requirements specified by this field are not met at + scheduling time, the pod will not be scheduled onto the node. + If the affinity requirements specified by this field cease to be met + at some point during pod execution (e.g. due to an update), the system + may or may not try to eventually evict the pod from its node. + properties: + nodeSelectorTerms: + description: Required. A list of node selector + terms. The terms are ORed. + items: + description: |- + A null or empty node selector term matches no objects. The requirements of + them are ANDed. + The TopologySelectorTerm type implements a subset of the NodeSelectorTerm. + properties: + matchExpressions: + description: A list of node selector + requirements by node's labels. + items: + description: |- + A node selector requirement is a selector that contains values, a key, and an operator + that relates the key and values. + properties: + key: + description: The label key that + the selector applies to. + type: string + operator: + description: |- + Represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt. + type: string + values: + description: |- + An array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. If the operator is Gt or Lt, the values + array must have a single element, which will be interpreted as an integer. + This array is replaced during a strategic merge patch. + items: type: string - operator: - description: |- - Represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt. + type: array + required: + - key + - operator + type: object + type: array + matchFields: + description: A list of node selector + requirements by node's fields. + items: + description: |- + A node selector requirement is a selector that contains values, a key, and an operator + that relates the key and values. + properties: + key: + description: The label key that + the selector applies to. + type: string + operator: + description: |- + Represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt. + type: string + values: + description: |- + An array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. If the operator is Gt or Lt, the values + array must have a single element, which will be interpreted as an integer. + This array is replaced during a strategic merge patch. + items: type: string - values: - description: |- - An array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. If the operator is Gt or Lt, the values - array must have a single element, which will be interpreted as an integer. - This array is replaced during a strategic merge patch. - items: + type: array + required: + - key + - operator + type: object + type: array + type: object + x-kubernetes-map-type: atomic + type: array + required: + - nodeSelectorTerms + type: object + x-kubernetes-map-type: atomic + type: object + podAffinity: + description: Describes pod affinity scheduling rules + (e.g. co-locate this pod in the same node, zone, + etc. as some other pod(s)). + properties: + preferredDuringSchedulingIgnoredDuringExecution: + description: |- + The scheduler will prefer to schedule pods to nodes that satisfy + the affinity expressions specified by this field, but it may choose + a node that violates one or more of the expressions. The node that is + most preferred is the one with the greatest sum of weights, i.e. + for each node that meets all of the scheduling requirements (resource + request, requiredDuringScheduling affinity expressions, etc.), + compute a sum by iterating through the elements of this field and adding + "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the + node(s) with the highest sum are the most preferred. + items: + description: The weights of all of the matched + WeightedPodAffinityTerm fields are added per-node + to find the most preferred node(s) + properties: + podAffinityTerm: + description: Required. A pod affinity term, + associated with the corresponding weight. + properties: + labelSelector: + description: |- + A label query over a set of resources, in this case pods. + If it's null, this PodAffinityTerm matches with no Pods. + properties: + matchExpressions: + description: matchExpressions is + a list of label selector requirements. + The requirements are ANDed. + items: + description: |- + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. + properties: + key: + description: key is the label + key that the selector applies + to. type: string - type: array - required: - - key - - operator - type: object - type: array - type: object - x-kubernetes-map-type: atomic - weight: - description: - Weight associated with matching - the corresponding nodeSelectorTerm, in - the range 1-100. - format: int32 - type: integer - required: - - preference - - weight - type: object - type: array - ? requiredDuringSchedulingIgnoredDuringExecution - : description: |- - If the affinity requirements specified by this field are not met at - scheduling time, the pod will not be scheduled onto the node. - If the affinity requirements specified by this field cease to be met - at some point during pod execution (e.g. due to an update), the system - may or may not try to eventually evict the pod from its node. - properties: - nodeSelectorTerms: - description: - Required. A list of node selector - terms. The terms are ORed. - items: - description: |- - A null or empty node selector term matches no objects. The requirements of - them are ANDed. - The TopologySelectorTerm type implements a subset of the NodeSelectorTerm. - properties: - matchExpressions: - description: - A list of node selector - requirements by node's labels. - items: - description: |- - A node selector requirement is a selector that contains values, a key, and an operator - that relates the key and values. - properties: - key: - description: - The label key that - the selector applies to. - type: string - operator: - description: |- - Represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt. - type: string - values: - description: |- - An array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. If the operator is Gt or Lt, the values - array must have a single element, which will be interpreted as an integer. - This array is replaced during a strategic merge patch. - items: + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. type: string - type: array - required: + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. + items: + type: string + type: array + required: - key - operator - type: object - type: array - matchFields: - description: - A list of node selector - requirements by node's fields. - items: + type: object + type: array + matchLabels: + additionalProperties: + type: string description: |- - A node selector requirement is a selector that contains values, a key, and an operator - that relates the key and values. - properties: - key: - description: - The label key that - the selector applies to. - type: string - operator: - description: |- - Represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt. - type: string - values: - description: |- - An array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. If the operator is Gt or Lt, the values - array must have a single element, which will be interpreted as an integer. - This array is replaced during a strategic merge patch. - items: + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. + type: object + type: object + x-kubernetes-map-type: atomic + matchLabelKeys: + description: |- + MatchLabelKeys is a set of pod label keys to select which pods will + be taken into consideration. The keys are used to lookup values from the + incoming pod labels, those key-value labels are merged with `LabelSelector` as `key in (value)` + to select the group of existing pods which pods will be taken into consideration + for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming + pod labels will be ignored. The default value is empty. + The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. + Also, MatchLabelKeys cannot be set when LabelSelector isn't set. + This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. + items: + type: string + type: array + x-kubernetes-list-type: atomic + mismatchLabelKeys: + description: |- + MismatchLabelKeys is a set of pod label keys to select which pods will + be taken into consideration. The keys are used to lookup values from the + incoming pod labels, those key-value labels are merged with `LabelSelector` as `key notin (value)` + to select the group of existing pods which pods will be taken into consideration + for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming + pod labels will be ignored. The default value is empty. + The same key is forbidden to exist in both MismatchLabelKeys and LabelSelector. + Also, MismatchLabelKeys cannot be set when LabelSelector isn't set. + This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. + items: + type: string + type: array + x-kubernetes-list-type: atomic + namespaceSelector: + description: |- + A label query over the set of namespaces that the term applies to. + The term is applied to the union of the namespaces selected by this field + and the ones listed in the namespaces field. + null selector and null or empty namespaces list means "this pod's namespace". + An empty selector ({}) matches all namespaces. + properties: + matchExpressions: + description: matchExpressions is + a list of label selector requirements. + The requirements are ANDed. + items: + description: |- + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. + properties: + key: + description: key is the label + key that the selector applies + to. type: string - type: array - required: + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. + items: + type: string + type: array + required: - key - operator + type: object + type: array + matchLabels: + additionalProperties: + type: string + description: |- + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. type: object - type: array - type: object - x-kubernetes-map-type: atomic - type: array + type: object + x-kubernetes-map-type: atomic + namespaces: + description: |- + namespaces specifies a static list of namespace names that the term applies to. + The term is applied to the union of the namespaces listed in this field + and the ones selected by namespaceSelector. + null or empty namespaces list and null namespaceSelector means "this pod's namespace". + items: + type: string + type: array + topologyKey: + description: |- + This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching + the labelSelector in the specified namespaces, where co-located is defined as running on a node + whose value of the label with key topologyKey matches that of any node on which any of the + selected pods is running. + Empty topologyKey is not allowed. + type: string + required: + - topologyKey + type: object + weight: + description: |- + weight associated with matching the corresponding podAffinityTerm, + in the range 1-100. + format: int32 + type: integer required: - - nodeSelectorTerms + - podAffinityTerm + - weight type: object - x-kubernetes-map-type: atomic - type: object - podAffinity: - description: - Describes pod affinity scheduling rules - (e.g. co-locate this pod in the same node, zone, - etc. as some other pod(s)). - properties: - ? preferredDuringSchedulingIgnoredDuringExecution - : description: |- - The scheduler will prefer to schedule pods to nodes that satisfy - the affinity expressions specified by this field, but it may choose - a node that violates one or more of the expressions. The node that is - most preferred is the one with the greatest sum of weights, i.e. - for each node that meets all of the scheduling requirements (resource - request, requiredDuringScheduling affinity expressions, etc.), - compute a sum by iterating through the elements of this field and adding - "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the - node(s) with the highest sum are the most preferred. - items: - description: - The weights of all of the matched - WeightedPodAffinityTerm fields are added per-node - to find the most preferred node(s) - properties: - podAffinityTerm: - description: - Required. A pod affinity term, - associated with the corresponding weight. - properties: - labelSelector: + type: array + requiredDuringSchedulingIgnoredDuringExecution: + description: |- + If the affinity requirements specified by this field are not met at + scheduling time, the pod will not be scheduled onto the node. + If the affinity requirements specified by this field cease to be met + at some point during pod execution (e.g. due to a pod label update), the + system may or may not try to eventually evict the pod from its node. + When there are multiple elements, the lists of nodes corresponding to each + podAffinityTerm are intersected, i.e. all terms must be satisfied. + items: + description: |- + Defines a set of pods (namely those matching the labelSelector + relative to the given namespace(s)) that this pod should be + co-located (affinity) or not co-located (anti-affinity) with, + where co-located is defined as running on a node whose value of + the label with key matches that of any node on which + a pod of the set of pods is running + properties: + labelSelector: + description: |- + A label query over a set of resources, in this case pods. + If it's null, this PodAffinityTerm matches with no Pods. + properties: + matchExpressions: + description: matchExpressions is a list + of label selector requirements. The + requirements are ANDed. + items: description: |- - A label query over a set of resources, in this case pods. - If it's null, this PodAffinityTerm matches with no Pods. + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. properties: - matchExpressions: - description: - matchExpressions is - a list of label selector requirements. - The requirements are ANDed. + key: + description: key is the label + key that the selector applies + to. + type: string + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. items: - description: |- - A label selector requirement is a selector that contains values, a key, and an operator that - relates the key and values. - properties: - key: - description: - key is the label - key that the selector applies - to. - type: string - operator: - description: |- - operator represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists and DoesNotExist. - type: string - values: - description: |- - values is an array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. This array is replaced during a strategic - merge patch. - items: - type: string - type: array - required: - - key - - operator - type: object - type: array - matchLabels: - additionalProperties: type: string - description: |- - matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels - map is equivalent to an element of matchExpressions, whose key field is "key", the - operator is "In", and the values array contains only "value". The requirements are ANDed. - type: object - type: object - x-kubernetes-map-type: atomic - matchLabelKeys: - description: |- - MatchLabelKeys is a set of pod label keys to select which pods will - be taken into consideration. The keys are used to lookup values from the - incoming pod labels, those key-value labels are merged with `LabelSelector` as `key in (value)` - to select the group of existing pods which pods will be taken into consideration - for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming - pod labels will be ignored. The default value is empty. - The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. - Also, MatchLabelKeys cannot be set when LabelSelector isn't set. - This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. - items: - type: string - type: array - x-kubernetes-list-type: atomic - mismatchLabelKeys: - description: |- - MismatchLabelKeys is a set of pod label keys to select which pods will - be taken into consideration. The keys are used to lookup values from the - incoming pod labels, those key-value labels are merged with `LabelSelector` as `key notin (value)` - to select the group of existing pods which pods will be taken into consideration - for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming - pod labels will be ignored. The default value is empty. - The same key is forbidden to exist in both MismatchLabelKeys and LabelSelector. - Also, MismatchLabelKeys cannot be set when LabelSelector isn't set. - This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. - items: - type: string - type: array - x-kubernetes-list-type: atomic - namespaceSelector: + type: array + required: + - key + - operator + type: object + type: array + matchLabels: + additionalProperties: + type: string + description: |- + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. + type: object + type: object + x-kubernetes-map-type: atomic + matchLabelKeys: + description: |- + MatchLabelKeys is a set of pod label keys to select which pods will + be taken into consideration. The keys are used to lookup values from the + incoming pod labels, those key-value labels are merged with `LabelSelector` as `key in (value)` + to select the group of existing pods which pods will be taken into consideration + for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming + pod labels will be ignored. The default value is empty. + The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. + Also, MatchLabelKeys cannot be set when LabelSelector isn't set. + This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. + items: + type: string + type: array + x-kubernetes-list-type: atomic + mismatchLabelKeys: + description: |- + MismatchLabelKeys is a set of pod label keys to select which pods will + be taken into consideration. The keys are used to lookup values from the + incoming pod labels, those key-value labels are merged with `LabelSelector` as `key notin (value)` + to select the group of existing pods which pods will be taken into consideration + for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming + pod labels will be ignored. The default value is empty. + The same key is forbidden to exist in both MismatchLabelKeys and LabelSelector. + Also, MismatchLabelKeys cannot be set when LabelSelector isn't set. + This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. + items: + type: string + type: array + x-kubernetes-list-type: atomic + namespaceSelector: + description: |- + A label query over the set of namespaces that the term applies to. + The term is applied to the union of the namespaces selected by this field + and the ones listed in the namespaces field. + null selector and null or empty namespaces list means "this pod's namespace". + An empty selector ({}) matches all namespaces. + properties: + matchExpressions: + description: matchExpressions is a list + of label selector requirements. The + requirements are ANDed. + items: description: |- - A label query over the set of namespaces that the term applies to. - The term is applied to the union of the namespaces selected by this field - and the ones listed in the namespaces field. - null selector and null or empty namespaces list means "this pod's namespace". - An empty selector ({}) matches all namespaces. + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. properties: - matchExpressions: - description: - matchExpressions is - a list of label selector requirements. - The requirements are ANDed. + key: + description: key is the label + key that the selector applies + to. + type: string + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. items: - description: |- - A label selector requirement is a selector that contains values, a key, and an operator that - relates the key and values. - properties: - key: - description: - key is the label - key that the selector applies - to. - type: string - operator: - description: |- - operator represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists and DoesNotExist. - type: string - values: - description: |- - values is an array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. This array is replaced during a strategic - merge patch. - items: - type: string - type: array - required: - - key - - operator - type: object - type: array - matchLabels: - additionalProperties: type: string - description: |- - matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels - map is equivalent to an element of matchExpressions, whose key field is "key", the - operator is "In", and the values array contains only "value". The requirements are ANDed. - type: object + type: array + required: + - key + - operator type: object - x-kubernetes-map-type: atomic - namespaces: - description: |- - namespaces specifies a static list of namespace names that the term applies to. - The term is applied to the union of the namespaces listed in this field - and the ones selected by namespaceSelector. - null or empty namespaces list and null namespaceSelector means "this pod's namespace". - items: - type: string - type: array - topologyKey: - description: |- - This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching - the labelSelector in the specified namespaces, where co-located is defined as running on a node - whose value of the label with key topologyKey matches that of any node on which any of the - selected pods is running. - Empty topologyKey is not allowed. + type: array + matchLabels: + additionalProperties: type: string - required: - - topologyKey - type: object - weight: - description: |- - weight associated with matching the corresponding podAffinityTerm, - in the range 1-100. - format: int32 - type: integer - required: - - podAffinityTerm - - weight - type: object - type: array - ? requiredDuringSchedulingIgnoredDuringExecution - : description: |- - If the affinity requirements specified by this field are not met at - scheduling time, the pod will not be scheduled onto the node. - If the affinity requirements specified by this field cease to be met - at some point during pod execution (e.g. due to a pod label update), the - system may or may not try to eventually evict the pod from its node. - When there are multiple elements, the lists of nodes corresponding to each - podAffinityTerm are intersected, i.e. all terms must be satisfied. - items: - description: |- - Defines a set of pods (namely those matching the labelSelector - relative to the given namespace(s)) that this pod should be - co-located (affinity) or not co-located (anti-affinity) with, - where co-located is defined as running on a node whose value of - the label with key matches that of any node on which - a pod of the set of pods is running - properties: - labelSelector: - description: |- - A label query over a set of resources, in this case pods. - If it's null, this PodAffinityTerm matches with no Pods. - properties: - matchExpressions: - description: - matchExpressions is a list - of label selector requirements. The - requirements are ANDed. - items: - description: |- - A label selector requirement is a selector that contains values, a key, and an operator that - relates the key and values. - properties: - key: - description: - key is the label - key that the selector applies - to. - type: string - operator: - description: |- - operator represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists and DoesNotExist. - type: string - values: - description: |- - values is an array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. This array is replaced during a strategic - merge patch. - items: + description: |- + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. + type: object + type: object + x-kubernetes-map-type: atomic + namespaces: + description: |- + namespaces specifies a static list of namespace names that the term applies to. + The term is applied to the union of the namespaces listed in this field + and the ones selected by namespaceSelector. + null or empty namespaces list and null namespaceSelector means "this pod's namespace". + items: + type: string + type: array + topologyKey: + description: |- + This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching + the labelSelector in the specified namespaces, where co-located is defined as running on a node + whose value of the label with key topologyKey matches that of any node on which any of the + selected pods is running. + Empty topologyKey is not allowed. + type: string + required: + - topologyKey + type: object + type: array + type: object + podAntiAffinity: + description: Describes pod anti-affinity scheduling + rules (e.g. avoid putting this pod in the same node, + zone, etc. as some other pod(s)). + properties: + preferredDuringSchedulingIgnoredDuringExecution: + description: |- + The scheduler will prefer to schedule pods to nodes that satisfy + the anti-affinity expressions specified by this field, but it may choose + a node that violates one or more of the expressions. The node that is + most preferred is the one with the greatest sum of weights, i.e. + for each node that meets all of the scheduling requirements (resource + request, requiredDuringScheduling anti-affinity expressions, etc.), + compute a sum by iterating through the elements of this field and adding + "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the + node(s) with the highest sum are the most preferred. + items: + description: The weights of all of the matched + WeightedPodAffinityTerm fields are added per-node + to find the most preferred node(s) + properties: + podAffinityTerm: + description: Required. A pod affinity term, + associated with the corresponding weight. + properties: + labelSelector: + description: |- + A label query over a set of resources, in this case pods. + If it's null, this PodAffinityTerm matches with no Pods. + properties: + matchExpressions: + description: matchExpressions is + a list of label selector requirements. + The requirements are ANDed. + items: + description: |- + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. + properties: + key: + description: key is the label + key that the selector applies + to. type: string - type: array - required: + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. + items: + type: string + type: array + required: - key - operator - type: object - type: array - matchLabels: - additionalProperties: - type: string - description: |- - matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels - map is equivalent to an element of matchExpressions, whose key field is "key", the - operator is "In", and the values array contains only "value". The requirements are ANDed. - type: object - type: object - x-kubernetes-map-type: atomic - matchLabelKeys: - description: |- - MatchLabelKeys is a set of pod label keys to select which pods will - be taken into consideration. The keys are used to lookup values from the - incoming pod labels, those key-value labels are merged with `LabelSelector` as `key in (value)` - to select the group of existing pods which pods will be taken into consideration - for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming - pod labels will be ignored. The default value is empty. - The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. - Also, MatchLabelKeys cannot be set when LabelSelector isn't set. - This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. - items: - type: string - type: array - x-kubernetes-list-type: atomic - mismatchLabelKeys: - description: |- - MismatchLabelKeys is a set of pod label keys to select which pods will - be taken into consideration. The keys are used to lookup values from the - incoming pod labels, those key-value labels are merged with `LabelSelector` as `key notin (value)` - to select the group of existing pods which pods will be taken into consideration - for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming - pod labels will be ignored. The default value is empty. - The same key is forbidden to exist in both MismatchLabelKeys and LabelSelector. - Also, MismatchLabelKeys cannot be set when LabelSelector isn't set. - This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. - items: - type: string - type: array - x-kubernetes-list-type: atomic - namespaceSelector: - description: |- - A label query over the set of namespaces that the term applies to. - The term is applied to the union of the namespaces selected by this field - and the ones listed in the namespaces field. - null selector and null or empty namespaces list means "this pod's namespace". - An empty selector ({}) matches all namespaces. - properties: - matchExpressions: - description: - matchExpressions is a list - of label selector requirements. The - requirements are ANDed. - items: + type: object + type: array + matchLabels: + additionalProperties: + type: string description: |- - A label selector requirement is a selector that contains values, a key, and an operator that - relates the key and values. - properties: - key: - description: - key is the label - key that the selector applies - to. - type: string - operator: - description: |- - operator represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists and DoesNotExist. - type: string - values: - description: |- - values is an array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. This array is replaced during a strategic - merge patch. - items: + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. + type: object + type: object + x-kubernetes-map-type: atomic + matchLabelKeys: + description: |- + MatchLabelKeys is a set of pod label keys to select which pods will + be taken into consideration. The keys are used to lookup values from the + incoming pod labels, those key-value labels are merged with `LabelSelector` as `key in (value)` + to select the group of existing pods which pods will be taken into consideration + for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming + pod labels will be ignored. The default value is empty. + The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. + Also, MatchLabelKeys cannot be set when LabelSelector isn't set. + This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. + items: + type: string + type: array + x-kubernetes-list-type: atomic + mismatchLabelKeys: + description: |- + MismatchLabelKeys is a set of pod label keys to select which pods will + be taken into consideration. The keys are used to lookup values from the + incoming pod labels, those key-value labels are merged with `LabelSelector` as `key notin (value)` + to select the group of existing pods which pods will be taken into consideration + for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming + pod labels will be ignored. The default value is empty. + The same key is forbidden to exist in both MismatchLabelKeys and LabelSelector. + Also, MismatchLabelKeys cannot be set when LabelSelector isn't set. + This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. + items: + type: string + type: array + x-kubernetes-list-type: atomic + namespaceSelector: + description: |- + A label query over the set of namespaces that the term applies to. + The term is applied to the union of the namespaces selected by this field + and the ones listed in the namespaces field. + null selector and null or empty namespaces list means "this pod's namespace". + An empty selector ({}) matches all namespaces. + properties: + matchExpressions: + description: matchExpressions is + a list of label selector requirements. + The requirements are ANDed. + items: + description: |- + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. + properties: + key: + description: key is the label + key that the selector applies + to. type: string - type: array - required: + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. + items: + type: string + type: array + required: - key - operator + type: object + type: array + matchLabels: + additionalProperties: + type: string + description: |- + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. type: object - type: array - matchLabels: - additionalProperties: - type: string - description: |- - matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels - map is equivalent to an element of matchExpressions, whose key field is "key", the - operator is "In", and the values array contains only "value". The requirements are ANDed. - type: object - type: object - x-kubernetes-map-type: atomic - namespaces: - description: |- - namespaces specifies a static list of namespace names that the term applies to. - The term is applied to the union of the namespaces listed in this field - and the ones selected by namespaceSelector. - null or empty namespaces list and null namespaceSelector means "this pod's namespace". - items: + type: object + x-kubernetes-map-type: atomic + namespaces: + description: |- + namespaces specifies a static list of namespace names that the term applies to. + The term is applied to the union of the namespaces listed in this field + and the ones selected by namespaceSelector. + null or empty namespaces list and null namespaceSelector means "this pod's namespace". + items: + type: string + type: array + topologyKey: + description: |- + This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching + the labelSelector in the specified namespaces, where co-located is defined as running on a node + whose value of the label with key topologyKey matches that of any node on which any of the + selected pods is running. + Empty topologyKey is not allowed. type: string - type: array - topologyKey: - description: |- - This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching - the labelSelector in the specified namespaces, where co-located is defined as running on a node - whose value of the label with key topologyKey matches that of any node on which any of the - selected pods is running. - Empty topologyKey is not allowed. - type: string - required: + required: - topologyKey - type: object - type: array - type: object - podAntiAffinity: - description: - Describes pod anti-affinity scheduling - rules (e.g. avoid putting this pod in the same node, - zone, etc. as some other pod(s)). - properties: - ? preferredDuringSchedulingIgnoredDuringExecution - : description: |- - The scheduler will prefer to schedule pods to nodes that satisfy - the anti-affinity expressions specified by this field, but it may choose - a node that violates one or more of the expressions. The node that is - most preferred is the one with the greatest sum of weights, i.e. - for each node that meets all of the scheduling requirements (resource - request, requiredDuringScheduling anti-affinity expressions, etc.), - compute a sum by iterating through the elements of this field and adding - "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the - node(s) with the highest sum are the most preferred. - items: - description: - The weights of all of the matched - WeightedPodAffinityTerm fields are added per-node - to find the most preferred node(s) - properties: - podAffinityTerm: - description: - Required. A pod affinity term, - associated with the corresponding weight. - properties: - labelSelector: + type: object + weight: + description: |- + weight associated with matching the corresponding podAffinityTerm, + in the range 1-100. + format: int32 + type: integer + required: + - podAffinityTerm + - weight + type: object + type: array + requiredDuringSchedulingIgnoredDuringExecution: + description: |- + If the anti-affinity requirements specified by this field are not met at + scheduling time, the pod will not be scheduled onto the node. + If the anti-affinity requirements specified by this field cease to be met + at some point during pod execution (e.g. due to a pod label update), the + system may or may not try to eventually evict the pod from its node. + When there are multiple elements, the lists of nodes corresponding to each + podAffinityTerm are intersected, i.e. all terms must be satisfied. + items: + description: |- + Defines a set of pods (namely those matching the labelSelector + relative to the given namespace(s)) that this pod should be + co-located (affinity) or not co-located (anti-affinity) with, + where co-located is defined as running on a node whose value of + the label with key matches that of any node on which + a pod of the set of pods is running + properties: + labelSelector: + description: |- + A label query over a set of resources, in this case pods. + If it's null, this PodAffinityTerm matches with no Pods. + properties: + matchExpressions: + description: matchExpressions is a list + of label selector requirements. The + requirements are ANDed. + items: description: |- - A label query over a set of resources, in this case pods. - If it's null, this PodAffinityTerm matches with no Pods. + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. properties: - matchExpressions: - description: - matchExpressions is - a list of label selector requirements. - The requirements are ANDed. + key: + description: key is the label + key that the selector applies + to. + type: string + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. items: - description: |- - A label selector requirement is a selector that contains values, a key, and an operator that - relates the key and values. - properties: - key: - description: - key is the label - key that the selector applies - to. - type: string - operator: - description: |- - operator represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists and DoesNotExist. - type: string - values: - description: |- - values is an array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. This array is replaced during a strategic - merge patch. - items: - type: string - type: array - required: - - key - - operator - type: object - type: array - matchLabels: - additionalProperties: type: string - description: |- - matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels - map is equivalent to an element of matchExpressions, whose key field is "key", the - operator is "In", and the values array contains only "value". The requirements are ANDed. - type: object + type: array + required: + - key + - operator type: object - x-kubernetes-map-type: atomic - matchLabelKeys: - description: |- - MatchLabelKeys is a set of pod label keys to select which pods will - be taken into consideration. The keys are used to lookup values from the - incoming pod labels, those key-value labels are merged with `LabelSelector` as `key in (value)` - to select the group of existing pods which pods will be taken into consideration - for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming - pod labels will be ignored. The default value is empty. - The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. - Also, MatchLabelKeys cannot be set when LabelSelector isn't set. - This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. - items: - type: string - type: array - x-kubernetes-list-type: atomic - mismatchLabelKeys: - description: |- - MismatchLabelKeys is a set of pod label keys to select which pods will - be taken into consideration. The keys are used to lookup values from the - incoming pod labels, those key-value labels are merged with `LabelSelector` as `key notin (value)` - to select the group of existing pods which pods will be taken into consideration - for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming - pod labels will be ignored. The default value is empty. - The same key is forbidden to exist in both MismatchLabelKeys and LabelSelector. - Also, MismatchLabelKeys cannot be set when LabelSelector isn't set. - This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. - items: - type: string - type: array - x-kubernetes-list-type: atomic - namespaceSelector: + type: array + matchLabels: + additionalProperties: + type: string + description: |- + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. + type: object + type: object + x-kubernetes-map-type: atomic + matchLabelKeys: + description: |- + MatchLabelKeys is a set of pod label keys to select which pods will + be taken into consideration. The keys are used to lookup values from the + incoming pod labels, those key-value labels are merged with `LabelSelector` as `key in (value)` + to select the group of existing pods which pods will be taken into consideration + for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming + pod labels will be ignored. The default value is empty. + The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. + Also, MatchLabelKeys cannot be set when LabelSelector isn't set. + This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. + items: + type: string + type: array + x-kubernetes-list-type: atomic + mismatchLabelKeys: + description: |- + MismatchLabelKeys is a set of pod label keys to select which pods will + be taken into consideration. The keys are used to lookup values from the + incoming pod labels, those key-value labels are merged with `LabelSelector` as `key notin (value)` + to select the group of existing pods which pods will be taken into consideration + for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming + pod labels will be ignored. The default value is empty. + The same key is forbidden to exist in both MismatchLabelKeys and LabelSelector. + Also, MismatchLabelKeys cannot be set when LabelSelector isn't set. + This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. + items: + type: string + type: array + x-kubernetes-list-type: atomic + namespaceSelector: + description: |- + A label query over the set of namespaces that the term applies to. + The term is applied to the union of the namespaces selected by this field + and the ones listed in the namespaces field. + null selector and null or empty namespaces list means "this pod's namespace". + An empty selector ({}) matches all namespaces. + properties: + matchExpressions: + description: matchExpressions is a list + of label selector requirements. The + requirements are ANDed. + items: description: |- - A label query over the set of namespaces that the term applies to. - The term is applied to the union of the namespaces selected by this field - and the ones listed in the namespaces field. - null selector and null or empty namespaces list means "this pod's namespace". - An empty selector ({}) matches all namespaces. + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. properties: - matchExpressions: - description: - matchExpressions is - a list of label selector requirements. - The requirements are ANDed. + key: + description: key is the label + key that the selector applies + to. + type: string + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. items: - description: |- - A label selector requirement is a selector that contains values, a key, and an operator that - relates the key and values. - properties: - key: - description: - key is the label - key that the selector applies - to. - type: string - operator: - description: |- - operator represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists and DoesNotExist. - type: string - values: - description: |- - values is an array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. This array is replaced during a strategic - merge patch. - items: - type: string - type: array - required: - - key - - operator - type: object - type: array - matchLabels: - additionalProperties: type: string - description: |- - matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels - map is equivalent to an element of matchExpressions, whose key field is "key", the - operator is "In", and the values array contains only "value". The requirements are ANDed. - type: object + type: array + required: + - key + - operator type: object - x-kubernetes-map-type: atomic - namespaces: - description: |- - namespaces specifies a static list of namespace names that the term applies to. - The term is applied to the union of the namespaces listed in this field - and the ones selected by namespaceSelector. - null or empty namespaces list and null namespaceSelector means "this pod's namespace". - items: - type: string - type: array - topologyKey: + type: array + matchLabels: + additionalProperties: + type: string + description: |- + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. + type: object + type: object + x-kubernetes-map-type: atomic + namespaces: + description: |- + namespaces specifies a static list of namespace names that the term applies to. + The term is applied to the union of the namespaces listed in this field + and the ones selected by namespaceSelector. + null or empty namespaces list and null namespaceSelector means "this pod's namespace". + items: + type: string + type: array + topologyKey: + description: |- + This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching + the labelSelector in the specified namespaces, where co-located is defined as running on a node + whose value of the label with key topologyKey matches that of any node on which any of the + selected pods is running. + Empty topologyKey is not allowed. + type: string + required: + - topologyKey + type: object + type: array + type: object + type: object + automountServiceAccountToken: + description: AutomountServiceAccountToken indicates whether + a service account token should be automatically mounted. + type: boolean + containers: + description: |- + List of containers belonging to the pod. + Containers cannot currently be added or removed. + There must be at least one container in a Pod. + Cannot be updated. + items: + description: A single application container that you + want to run within a pod. + properties: + args: + description: |- + Arguments to the entrypoint. + The container image's CMD is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: + type: string + type: array + command: + description: |- + Entrypoint array. Not executed within a shell. + The container image's ENTRYPOINT is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: + type: string + type: array + env: + description: |- + List of environment variables to set in the container. + Cannot be updated. + items: + description: EnvVar represents an environment + variable present in a Container. + properties: + name: + description: Name of the environment variable. + Must be a C_IDENTIFIER. + type: string + value: + description: |- + Variable references $(VAR_NAME) are expanded + using the previously defined environment variables in the container and + any service environment variables. If a variable cannot be resolved, + the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. + "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". + Escaped references will never be expanded, regardless of whether the variable + exists or not. + Defaults to "". + type: string + valueFrom: + description: Source for the environment variable's + value. Cannot be used if value is not empty. + properties: + configMapKeyRef: + description: Selects a key of a ConfigMap. + properties: + key: + description: The key to select. + type: string + name: description: |- - This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching - the labelSelector in the specified namespaces, where co-located is defined as running on a node - whose value of the label with key topologyKey matches that of any node on which any of the - selected pods is running. - Empty topologyKey is not allowed. + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? type: string + optional: + description: Specify whether the ConfigMap + or its key must be defined + type: boolean required: - - topologyKey + - key type: object - weight: - description: |- - weight associated with matching the corresponding podAffinityTerm, - in the range 1-100. - format: int32 - type: integer - required: - - podAffinityTerm - - weight - type: object - type: array - ? requiredDuringSchedulingIgnoredDuringExecution - : description: |- - If the anti-affinity requirements specified by this field are not met at - scheduling time, the pod will not be scheduled onto the node. - If the anti-affinity requirements specified by this field cease to be met - at some point during pod execution (e.g. due to a pod label update), the - system may or may not try to eventually evict the pod from its node. - When there are multiple elements, the lists of nodes corresponding to each - podAffinityTerm are intersected, i.e. all terms must be satisfied. - items: - description: |- - Defines a set of pods (namely those matching the labelSelector - relative to the given namespace(s)) that this pod should be - co-located (affinity) or not co-located (anti-affinity) with, - where co-located is defined as running on a node whose value of - the label with key matches that of any node on which - a pod of the set of pods is running - properties: - labelSelector: + x-kubernetes-map-type: atomic + fieldRef: description: |- - A label query over a set of resources, in this case pods. - If it's null, this PodAffinityTerm matches with no Pods. + Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['']`, `metadata.annotations['']`, + spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs. properties: - matchExpressions: - description: - matchExpressions is a list - of label selector requirements. The - requirements are ANDed. - items: - description: |- - A label selector requirement is a selector that contains values, a key, and an operator that - relates the key and values. - properties: - key: - description: - key is the label - key that the selector applies - to. - type: string - operator: - description: |- - operator represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists and DoesNotExist. - type: string - values: - description: |- - values is an array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. This array is replaced during a strategic - merge patch. - items: - type: string - type: array - required: - - key - - operator - type: object - type: array - matchLabels: - additionalProperties: - type: string - description: |- - matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels - map is equivalent to an element of matchExpressions, whose key field is "key", the - operator is "In", and the values array contains only "value". The requirements are ANDed. - type: object + apiVersion: + description: Version of the schema + the FieldPath is written in terms + of, defaults to "v1". + type: string + fieldPath: + description: Path of the field to + select in the specified API version. + type: string + required: + - fieldPath type: object x-kubernetes-map-type: atomic - matchLabelKeys: - description: |- - MatchLabelKeys is a set of pod label keys to select which pods will - be taken into consideration. The keys are used to lookup values from the - incoming pod labels, those key-value labels are merged with `LabelSelector` as `key in (value)` - to select the group of existing pods which pods will be taken into consideration - for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming - pod labels will be ignored. The default value is empty. - The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. - Also, MatchLabelKeys cannot be set when LabelSelector isn't set. - This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. - items: - type: string - type: array - x-kubernetes-list-type: atomic - mismatchLabelKeys: - description: |- - MismatchLabelKeys is a set of pod label keys to select which pods will - be taken into consideration. The keys are used to lookup values from the - incoming pod labels, those key-value labels are merged with `LabelSelector` as `key notin (value)` - to select the group of existing pods which pods will be taken into consideration - for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming - pod labels will be ignored. The default value is empty. - The same key is forbidden to exist in both MismatchLabelKeys and LabelSelector. - Also, MismatchLabelKeys cannot be set when LabelSelector isn't set. - This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. - items: - type: string - type: array - x-kubernetes-list-type: atomic - namespaceSelector: + resourceFieldRef: description: |- - A label query over the set of namespaces that the term applies to. - The term is applied to the union of the namespaces selected by this field - and the ones listed in the namespaces field. - null selector and null or empty namespaces list means "this pod's namespace". - An empty selector ({}) matches all namespaces. + Selects a resource of the container: only resources limits and requests + (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported. properties: - matchExpressions: - description: - matchExpressions is a list - of label selector requirements. The - requirements are ANDed. - items: - description: |- - A label selector requirement is a selector that contains values, a key, and an operator that - relates the key and values. - properties: - key: - description: - key is the label - key that the selector applies - to. - type: string - operator: - description: |- - operator represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists and DoesNotExist. - type: string - values: - description: |- - values is an array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. This array is replaced during a strategic - merge patch. - items: - type: string - type: array - required: - - key - - operator - type: object - type: array - matchLabels: - additionalProperties: - type: string + containerName: + description: 'Container name: required + for volumes, optional for env vars' + type: string + divisor: + anyOf: + - type: integer + - type: string + description: Specifies the output + format of the exposed resources, + defaults to "1" + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + resource: + description: 'Required: resource to + select' + type: string + required: + - resource + type: object + x-kubernetes-map-type: atomic + secretKeyRef: + description: Selects a key of a secret + in the pod's namespace + properties: + key: + description: The key of the secret + to select from. Must be a valid + secret key. + type: string + name: description: |- - matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels - map is equivalent to an element of matchExpressions, whose key field is "key", the - operator is "In", and the values array contains only "value". The requirements are ANDed. - type: object + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + optional: + description: Specify whether the Secret + or its key must be defined + type: boolean + required: + - key type: object x-kubernetes-map-type: atomic - namespaces: + type: object + required: + - name + type: object + type: array + envFrom: + description: |- + List of sources to populate environment variables in the container. + The keys defined within a source must be a C_IDENTIFIER. All invalid keys + will be reported as an event when the container is starting. When a key exists in multiple + sources, the value associated with the last source will take precedence. + Values defined by an Env with a duplicate key will take precedence. + Cannot be updated. + items: + description: EnvFromSource represents the source + of a set of ConfigMaps + properties: + configMapRef: + description: The ConfigMap to select from + properties: + name: description: |- - namespaces specifies a static list of namespace names that the term applies to. - The term is applied to the union of the namespaces listed in this field - and the ones selected by namespaceSelector. - null or empty namespaces list and null namespaceSelector means "this pod's namespace". - items: - type: string - type: array - topologyKey: + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + optional: + description: Specify whether the ConfigMap + must be defined + type: boolean + type: object + x-kubernetes-map-type: atomic + prefix: + description: An optional identifier to prepend + to each key in the ConfigMap. Must be a + C_IDENTIFIER. + type: string + secretRef: + description: The Secret to select from + properties: + name: description: |- - This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching - the labelSelector in the specified namespaces, where co-located is defined as running on a node - whose value of the label with key topologyKey matches that of any node on which any of the - selected pods is running. - Empty topologyKey is not allowed. + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? type: string - required: - - topologyKey + optional: + description: Specify whether the Secret + must be defined + type: boolean type: object - type: array - type: object - type: object - automountServiceAccountToken: - description: - AutomountServiceAccountToken indicates whether - a service account token should be automatically mounted. - type: boolean - containers: - description: |- - List of containers belonging to the pod. - Containers cannot currently be added or removed. - There must be at least one container in a Pod. - Cannot be updated. - items: - description: - A single application container that you - want to run within a pod. - properties: - args: - description: |- - Arguments to the entrypoint. - The container image's CMD is used if this is not provided. - Variable references $(VAR_NAME) are expanded using the container's environment. If a variable - cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced - to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will - produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless - of whether the variable exists or not. Cannot be updated. - More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell - items: - type: string - type: array - command: - description: |- - Entrypoint array. Not executed within a shell. - The container image's ENTRYPOINT is used if this is not provided. - Variable references $(VAR_NAME) are expanded using the container's environment. If a variable - cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced - to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will - produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless - of whether the variable exists or not. Cannot be updated. - More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell - items: - type: string - type: array - env: - description: |- - List of environment variables to set in the container. - Cannot be updated. - items: - description: - EnvVar represents an environment - variable present in a Container. + x-kubernetes-map-type: atomic + type: object + type: array + image: + description: |- + Container image name. + More info: https://kubernetes.io/docs/concepts/containers/images + This field is optional to allow higher level config management to default or override + container images in workload controllers like Deployments and StatefulSets. + type: string + imagePullPolicy: + description: |- + Image pull policy. + One of Always, Never, IfNotPresent. + Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/containers/images#updating-images + type: string + lifecycle: + description: |- + Actions that the management system should take in response to container lifecycle events. + Cannot be updated. + properties: + postStart: + description: |- + PostStart is called immediately after a container is created. If the handler fails, + the container is terminated and restarted according to its restart policy. + Other management of the container blocks until the hook completes. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks properties: - name: - description: - Name of the environment variable. - Must be a C_IDENTIFIER. - type: string - value: - description: |- - Variable references $(VAR_NAME) are expanded - using the previously defined environment variables in the container and - any service environment variables. If a variable cannot be resolved, - the reference in the input string will be unchanged. Double $$ are reduced - to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. - "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". - Escaped references will never be expanded, regardless of whether the variable - exists or not. - Defaults to "". - type: string - valueFrom: - description: - Source for the environment variable's - value. Cannot be used if value is not empty. + exec: + description: Exec specifies the action to + take. properties: - configMapKeyRef: - description: Selects a key of a ConfigMap. - properties: - key: - description: The key to select. - type: string - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - Specify whether the ConfigMap - or its key must be defined - type: boolean - required: - - key - type: object - x-kubernetes-map-type: atomic - fieldRef: + command: description: |- - Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['']`, `metadata.annotations['']`, - spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs. - properties: - apiVersion: - description: - Version of the schema - the FieldPath is written in terms - of, defaults to "v1". - type: string - fieldPath: - description: - Path of the field to - select in the specified API version. - type: string - required: - - fieldPath - type: object - x-kubernetes-map-type: atomic - resourceFieldRef: + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + httpGet: + description: HTTPGet specifies the http + request to perform. + properties: + host: description: |- - Selects a resource of the container: only resources limits and requests - (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported. - properties: - containerName: - description: - "Container name: required - for volumes, optional for env vars" - type: string - divisor: - anyOf: - - type: integer - - type: string - description: - Specifies the output - format of the exposed resources, - defaults to "1" - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ - x-kubernetes-int-or-string: true - resource: - description: - "Required: resource to - select" - type: string - required: - - resource - type: object - x-kubernetes-map-type: atomic - secretKeyRef: - description: - Selects a key of a secret - in the pod's namespace - properties: - key: - description: - The key of the secret - to select from. Must be a valid - secret key. - type: string - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - Specify whether the Secret - or its key must be defined - type: boolean - required: - - key - type: object - x-kubernetes-map-type: atomic + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in + the request. HTTP allows repeated + headers. + items: + description: HTTPHeader describes + a custom header to be used in HTTP + probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field + value + type: string + required: + - name + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + sleep: + description: Sleep represents the duration + that the container should sleep before + being terminated. + properties: + seconds: + description: Seconds is the number of + seconds to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for the backward compatibility. There are no validation of this field and + lifecycle hooks will fail in runtime when tcp handler is specified. + properties: + host: + description: 'Optional: Host name to + connect to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port type: object - required: - - name type: object - type: array - envFrom: - description: |- - List of sources to populate environment variables in the container. - The keys defined within a source must be a C_IDENTIFIER. All invalid keys - will be reported as an event when the container is starting. When a key exists in multiple - sources, the value associated with the last source will take precedence. - Values defined by an Env with a duplicate key will take precedence. - Cannot be updated. - items: - description: - EnvFromSource represents the source - of a set of ConfigMaps + preStop: + description: |- + PreStop is called immediately before a container is terminated due to an + API request or management event such as liveness/startup probe failure, + preemption, resource contention, etc. The handler is not called if the + container crashes or exits. The Pod's termination grace period countdown begins before the + PreStop hook is executed. Regardless of the outcome of the handler, the + container will eventually terminate within the Pod's termination grace + period (unless delayed by finalizers). Other management of the container blocks until the hook completes + or until the termination grace period is reached. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks properties: - configMapRef: - description: The ConfigMap to select from + exec: + description: Exec specifies the action to + take. properties: - name: + command: description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - Specify whether the ConfigMap - must be defined - type: boolean + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array type: object - x-kubernetes-map-type: atomic - prefix: - description: - An optional identifier to prepend - to each key in the ConfigMap. Must be a - C_IDENTIFIER. - type: string - secretRef: - description: The Secret to select from + httpGet: + description: HTTPGet specifies the http + request to perform. properties: - name: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in + the request. HTTP allows repeated + headers. + items: + description: HTTPHeader describes + a custom header to be used in HTTP + probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field + value + type: string + required: + - name + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? + Scheme to use for connecting to the host. + Defaults to HTTP. type: string - optional: - description: - Specify whether the Secret - must be defined - type: boolean + required: + - port + type: object + sleep: + description: Sleep represents the duration + that the container should sleep before + being terminated. + properties: + seconds: + description: Seconds is the number of + seconds to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for the backward compatibility. There are no validation of this field and + lifecycle hooks will fail in runtime when tcp handler is specified. + properties: + host: + description: 'Optional: Host name to + connect to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port type: object - x-kubernetes-map-type: atomic type: object - type: array - image: - description: |- - Container image name. - More info: https://kubernetes.io/docs/concepts/containers/images - This field is optional to allow higher level config management to default or override - container images in workload controllers like Deployments and StatefulSets. - type: string - imagePullPolicy: - description: |- - Image pull policy. - One of Always, Never, IfNotPresent. - Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. - Cannot be updated. - More info: https://kubernetes.io/docs/concepts/containers/images#updating-images - type: string - lifecycle: - description: |- - Actions that the management system should take in response to container lifecycle events. - Cannot be updated. - properties: - postStart: - description: |- - PostStart is called immediately after a container is created. If the handler fails, - the container is terminated and restarted according to its restart policy. - Other management of the container blocks until the hook completes. - More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks - properties: - exec: - description: - Exec specifies the action to - take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - httpGet: - description: - HTTPGet specifies the http - request to perform. + type: object + livenessProbe: + description: |- + Periodic probe of container liveness. + Container will be restarted if the probe fails. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies the action to take. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies an action involving + a GRPC port. + properties: + port: + description: Port number of the gRPC service. + Number must be in the range 1 to 65535. + format: int32 + type: integer + service: + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies the http request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the + request. HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in - the request. HTTP allows repeated - headers. - items: - description: - HTTPHeader describes - a custom header to be used in HTTP - probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: - The header field - value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: + name: description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. type: string - required: - - port - type: object - sleep: - description: - Sleep represents the duration - that the container should sleep before - being terminated. - properties: - seconds: - description: - Seconds is the number of - seconds to sleep. - format: int64 - type: integer - required: - - seconds - type: object - tcpSocket: - description: |- - Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept - for the backward compatibility. There are no validation of this field and - lifecycle hooks will fail in runtime when tcp handler is specified. - properties: - host: - description: - "Optional: Host name to - connect to, defaults to the pod IP." + value: + description: The header field value type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true required: - - port + - name + - value type: object - type: object - preStop: + type: array + path: + description: Path to access on the HTTP + server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies an action involving + a TCP port. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + name: + description: |- + Name of the container specified as a DNS_LABEL. + Each container in a pod must have a unique name (DNS_LABEL). + Cannot be updated. + type: string + ports: + description: |- + List of ports to expose from the container. Not specifying a port here + DOES NOT prevent that port from being exposed. Any port which is + listening on the default "0.0.0.0" address inside a container will be + accessible from the network. + Modifying this array with strategic merge patch may corrupt the data. + For more information See https://github.com/kubernetes/kubernetes/issues/108255. + Cannot be updated. + items: + description: ContainerPort represents a network + port in a single container. + properties: + containerPort: description: |- - PreStop is called immediately before a container is terminated due to an - API request or management event such as liveness/startup probe failure, - preemption, resource contention, etc. The handler is not called if the - container crashes or exits. The Pod's termination grace period countdown begins before the - PreStop hook is executed. Regardless of the outcome of the handler, the - container will eventually terminate within the Pod's termination grace - period (unless delayed by finalizers). Other management of the container blocks until the hook completes - or until the termination grace period is reached. - More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks - properties: - exec: - description: - Exec specifies the action to - take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - httpGet: - description: - HTTPGet specifies the http - request to perform. + Number of port to expose on the pod's IP address. + This must be a valid port number, 0 < x < 65536. + format: int32 + type: integer + hostIP: + description: What host IP to bind the external + port to. + type: string + hostPort: + description: |- + Number of port to expose on the host. + If specified, this must be a valid port number, 0 < x < 65536. + If HostNetwork is specified, this must match ContainerPort. + Most containers do not need this. + format: int32 + type: integer + name: + description: |- + If specified, this must be an IANA_SVC_NAME and unique within the pod. Each + named port in a pod must have a unique name. Name for the port that can be + referred to by services. + type: string + protocol: + default: TCP + description: |- + Protocol for port. Must be UDP, TCP, or SCTP. + Defaults to "TCP". + type: string + required: + - containerPort + type: object + type: array + x-kubernetes-list-map-keys: + - containerPort + - protocol + x-kubernetes-list-type: map + readinessProbe: + description: |- + Periodic probe of container service readiness. + Container will be removed from service endpoints if the probe fails. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies the action to take. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies an action involving + a GRPC port. + properties: + port: + description: Port number of the gRPC service. + Number must be in the range 1 to 65535. + format: int32 + type: integer + service: + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies the http request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the + request. HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes properties: - host: + name: description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in - the request. HTTP allows repeated - headers. - items: - description: - HTTPHeader describes - a custom header to be used in HTTP - probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: - The header field - value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: - description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. + value: + description: The header field value type: string required: - - port - type: object - sleep: - description: - Sleep represents the duration - that the container should sleep before - being terminated. - properties: - seconds: - description: - Seconds is the number of - seconds to sleep. - format: int64 - type: integer - required: - - seconds + - name + - value type: object - tcpSocket: - description: |- - Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept - for the backward compatibility. There are no validation of this field and - lifecycle hooks will fail in runtime when tcp handler is specified. - properties: - host: - description: - "Optional: Host name to - connect to, defaults to the pod IP." - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - required: - - port - type: object - type: object - type: object - livenessProbe: - description: |- - Periodic probe of container liveness. - Container will be restarted if the probe fails. - Cannot be updated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - properties: - exec: - description: Exec specifies the action to take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - failureThreshold: - description: |- - Minimum consecutive failures for the probe to be considered failed after having succeeded. - Defaults to 3. Minimum value is 1. - format: int32 - type: integer - grpc: - description: - GRPC specifies an action involving - a GRPC port. - properties: - port: - description: - Port number of the gRPC service. - Number must be in the range 1 to 65535. - format: int32 - type: integer - service: - description: |- - Service is the name of the service to place in the gRPC HealthCheckRequest - (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). - - - If this is not specified, the default behavior is defined by gRPC. - type: string - required: - - port - type: object - httpGet: - description: - HTTPGet specifies the http request - to perform. - properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in the - request. HTTP allows repeated headers. - items: - description: - HTTPHeader describes a custom - header to be used in HTTP probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: The header field value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: - description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. - type: string - required: - - port - type: object - initialDelaySeconds: - description: |- - Number of seconds after the container has started before liveness probes are initiated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - periodSeconds: - description: |- - How often (in seconds) to perform the probe. - Default to 10 seconds. Minimum value is 1. - format: int32 - type: integer - successThreshold: - description: |- - Minimum consecutive successes for the probe to be considered successful after having failed. - Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. - format: int32 - type: integer - tcpSocket: - description: - TCPSocket specifies an action involving - a TCP port. - properties: - host: - description: - "Optional: Host name to connect - to, defaults to the pod IP." - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - required: - - port - type: object - terminationGracePeriodSeconds: - description: |- - Optional duration in seconds the pod needs to terminate gracefully upon probe failure. - The grace period is the duration in seconds after the processes running in the pod are sent - a termination signal and the time when the processes are forcibly halted with a kill signal. - Set this value longer than the expected cleanup time for your process. - If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this - value overrides the value provided by the pod spec. - Value must be non-negative integer. The value zero indicates stop immediately via - the kill signal (no opportunity to shut down). - This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. - Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. - format: int64 - type: integer - timeoutSeconds: - description: |- - Number of seconds after which the probe times out. - Defaults to 1 second. Minimum value is 1. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - type: object - name: - description: |- - Name of the container specified as a DNS_LABEL. - Each container in a pod must have a unique name (DNS_LABEL). - Cannot be updated. - type: string - ports: - description: |- - List of ports to expose from the container. Not specifying a port here - DOES NOT prevent that port from being exposed. Any port which is - listening on the default "0.0.0.0" address inside a container will be - accessible from the network. - Modifying this array with strategic merge patch may corrupt the data. - For more information See https://github.com/kubernetes/kubernetes/issues/108255. - Cannot be updated. - items: - description: - ContainerPort represents a network - port in a single container. - properties: - containerPort: - description: |- - Number of port to expose on the pod's IP address. - This must be a valid port number, 0 < x < 65536. - format: int32 - type: integer - hostIP: - description: - What host IP to bind the external - port to. + type: array + path: + description: Path to access on the HTTP + server. type: string - hostPort: + port: + anyOf: + - type: integer + - type: string description: |- - Number of port to expose on the host. - If specified, this must be a valid port number, 0 < x < 65536. - If HostNetwork is specified, this must match ContainerPort. - Most containers do not need this. - format: int32 - type: integer - name: + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: description: |- - If specified, this must be an IANA_SVC_NAME and unique within the pod. Each - named port in a pod must have a unique name. Name for the port that can be - referred to by services. + Scheme to use for connecting to the host. + Defaults to HTTP. type: string - protocol: - default: TCP - description: |- - Protocol for port. Must be UDP, TCP, or SCTP. - Defaults to "TCP". + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies an action involving + a TCP port. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true required: - - containerPort + - port type: object - type: array - x-kubernetes-list-map-keys: - - containerPort - - protocol - x-kubernetes-list-type: map - readinessProbe: - description: |- - Periodic probe of container service readiness. - Container will be removed from service endpoints if the probe fails. - Cannot be updated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + resizePolicy: + description: Resources resize policy for the container. + items: + description: ContainerResizePolicy represents + resource resize policy for the container. properties: - exec: - description: Exec specifies the action to take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - failureThreshold: + resourceName: description: |- - Minimum consecutive failures for the probe to be considered failed after having succeeded. - Defaults to 3. Minimum value is 1. - format: int32 - type: integer - grpc: - description: - GRPC specifies an action involving - a GRPC port. - properties: - port: - description: - Port number of the gRPC service. - Number must be in the range 1 to 65535. - format: int32 - type: integer - service: - description: |- - Service is the name of the service to place in the gRPC HealthCheckRequest - (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + Name of the resource to which this resource resize policy applies. + Supported values: cpu, memory. + type: string + restartPolicy: + description: |- + Restart policy to apply when specified resource is resized. + If not specified, it defaults to NotRequired. + type: string + required: + - resourceName + - restartPolicy + type: object + type: array + x-kubernetes-list-type: atomic + resources: + description: |- + Compute Resources required by this container. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + properties: + claims: + description: |- + Claims lists the names of resources, defined in spec.resourceClaims, + that are used by this container. - If this is not specified, the default behavior is defined by gRPC. - type: string - required: - - port - type: object - httpGet: - description: - HTTPGet specifies the http request - to perform. + This is an alpha field and requires enabling the + DynamicResourceAllocation feature gate. + + + This field is immutable. It can only be set for containers. + items: + description: ResourceClaim references one + entry in PodSpec.ResourceClaims. properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in the - request. HTTP allows repeated headers. - items: - description: - HTTPHeader describes a custom - header to be used in HTTP probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: The header field value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: + name: description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. + Name must match the name of one entry in pod.spec.resourceClaims of + the Pod where this field is used. It makes that resource available + inside a container. type: string required: - - port + - name type: object - initialDelaySeconds: - description: |- - Number of seconds after the container has started before liveness probes are initiated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - periodSeconds: - description: |- - How often (in seconds) to perform the probe. - Default to 10 seconds. Minimum value is 1. - format: int32 - type: integer - successThreshold: - description: |- - Minimum consecutive successes for the probe to be considered successful after having failed. - Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. - format: int32 - type: integer - tcpSocket: - description: - TCPSocket specifies an action involving - a TCP port. - properties: - host: - description: - "Optional: Host name to connect - to, defaults to the pod IP." + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + limits: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Limits describes the maximum amount of compute resources allowed. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + requests: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Requests describes the minimum amount of compute resources required. + If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, + otherwise to an implementation-defined value. Requests cannot exceed Limits. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + type: object + restartPolicy: + description: |- + RestartPolicy defines the restart behavior of individual containers in a pod. + This field may only be set for init containers, and the only allowed value is "Always". + For non-init containers or when this field is not specified, + the restart behavior is defined by the Pod's restart policy and the container type. + Setting the RestartPolicy as "Always" for the init container will have the following effect: + this init container will be continually restarted on + exit until all regular containers have terminated. Once all regular + containers have completed, all init containers with restartPolicy "Always" + will be shut down. This lifecycle differs from normal init containers and + is often referred to as a "sidecar" container. Although this init + container still starts in the init container sequence, it does not wait + for the container to complete before proceeding to the next init + container. Instead, the next init container starts immediately after this + init container is started, or after any startupProbe has successfully + completed. + type: string + securityContext: + description: |- + SecurityContext defines the security options the container should be run with. + If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. + More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/ + properties: + allowPrivilegeEscalation: + description: |- + AllowPrivilegeEscalation controls whether a process can gain more + privileges than its parent process. This bool directly controls if + the no_new_privs flag will be set on the container process. + AllowPrivilegeEscalation is true always when the container is: + 1) run as Privileged + 2) has CAP_SYS_ADMIN + Note that this field cannot be set when spec.os.name is windows. + type: boolean + capabilities: + description: |- + The capabilities to add/drop when running containers. + Defaults to the default set of capabilities granted by the container runtime. + Note that this field cannot be set when spec.os.name is windows. + properties: + add: + description: Added capabilities + items: + description: Capability represent POSIX + capabilities type type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - required: - - port - type: object - terminationGracePeriodSeconds: - description: |- - Optional duration in seconds the pod needs to terminate gracefully upon probe failure. - The grace period is the duration in seconds after the processes running in the pod are sent - a termination signal and the time when the processes are forcibly halted with a kill signal. - Set this value longer than the expected cleanup time for your process. - If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this - value overrides the value provided by the pod spec. - Value must be non-negative integer. The value zero indicates stop immediately via - the kill signal (no opportunity to shut down). - This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. - Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. - format: int64 - type: integer - timeoutSeconds: - description: |- - Number of seconds after which the probe times out. - Defaults to 1 second. Minimum value is 1. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - type: object - resizePolicy: - description: Resources resize policy for the container. - items: - description: - ContainerResizePolicy represents - resource resize policy for the container. + type: array + drop: + description: Removed capabilities + items: + description: Capability represent POSIX + capabilities type + type: string + type: array + type: object + privileged: + description: |- + Run container in privileged mode. + Processes in privileged containers are essentially equivalent to root on the host. + Defaults to false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + procMount: + description: |- + procMount denotes the type of proc mount to use for the containers. + The default is DefaultProcMount which uses the container runtime defaults for + readonly paths and masked paths. + This requires the ProcMountType feature flag to be enabled. + Note that this field cannot be set when spec.os.name is windows. + type: string + readOnlyRootFilesystem: + description: |- + Whether this container has a read-only root filesystem. + Default is false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + runAsGroup: + description: |- + The GID to run the entrypoint of the container process. + Uses runtime default if unset. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + runAsNonRoot: + description: |- + Indicates that the container must run as a non-root user. + If true, the Kubelet will validate the image at runtime to ensure that it + does not run as UID 0 (root) and fail to start the container if it does. + If unset or false, no such validation will be performed. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: boolean + runAsUser: + description: |- + The UID to run the entrypoint of the container process. + Defaults to user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + seLinuxOptions: + description: |- + The SELinux context to be applied to the container. + If unspecified, the container runtime will allocate a random SELinux context for each + container. May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. properties: - resourceName: + level: + description: Level is SELinux level label + that applies to the container. + type: string + role: + description: Role is a SELinux role label + that applies to the container. + type: string + type: + description: Type is a SELinux type label + that applies to the container. + type: string + user: + description: User is a SELinux user label + that applies to the container. + type: string + type: object + seccompProfile: + description: |- + The seccomp options to use by this container. If seccomp options are + provided at both the pod & container level, the container options + override the pod options. + Note that this field cannot be set when spec.os.name is windows. + properties: + localhostProfile: description: |- - Name of the resource to which this resource resize policy applies. - Supported values: cpu, memory. + localhostProfile indicates a profile defined in a file on the node should be used. + The profile must be preconfigured on the node to work. + Must be a descending path, relative to the kubelet's configured seccomp profile location. + Must be set if type is "Localhost". Must NOT be set for any other type. type: string - restartPolicy: + type: description: |- - Restart policy to apply when specified resource is resized. - If not specified, it defaults to NotRequired. + type indicates which kind of seccomp profile will be applied. + Valid options are: + + + Localhost - a profile defined in a file on the node should be used. + RuntimeDefault - the container runtime default profile should be used. + Unconfined - no profile should be applied. type: string required: - - resourceName - - restartPolicy + - type type: object - type: array - x-kubernetes-list-type: atomic - resources: - description: |- - Compute Resources required by this container. - Cannot be updated. - More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ - properties: - claims: - description: |- - Claims lists the names of resources, defined in spec.resourceClaims, - that are used by this container. - - - This is an alpha field and requires enabling the - DynamicResourceAllocation feature gate. - - - This field is immutable. It can only be set for containers. - items: - description: - ResourceClaim references one - entry in PodSpec.ResourceClaims. - properties: - name: - description: |- - Name must match the name of one entry in pod.spec.resourceClaims of - the Pod where this field is used. It makes that resource available - inside a container. - type: string - required: - - name - type: object - type: array - x-kubernetes-list-map-keys: - - name - x-kubernetes-list-type: map - limits: - additionalProperties: - anyOf: - - type: integer - - type: string - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ - x-kubernetes-int-or-string: true - description: |- - Limits describes the maximum amount of compute resources allowed. - More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ - type: object - requests: - additionalProperties: - anyOf: - - type: integer - - type: string - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ - x-kubernetes-int-or-string: true - description: |- - Requests describes the minimum amount of compute resources required. - If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, - otherwise to an implementation-defined value. Requests cannot exceed Limits. - More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ - type: object - type: object - restartPolicy: - description: |- - RestartPolicy defines the restart behavior of individual containers in a pod. - This field may only be set for init containers, and the only allowed value is "Always". - For non-init containers or when this field is not specified, - the restart behavior is defined by the Pod's restart policy and the container type. - Setting the RestartPolicy as "Always" for the init container will have the following effect: - this init container will be continually restarted on - exit until all regular containers have terminated. Once all regular - containers have completed, all init containers with restartPolicy "Always" - will be shut down. This lifecycle differs from normal init containers and - is often referred to as a "sidecar" container. Although this init - container still starts in the init container sequence, it does not wait - for the container to complete before proceeding to the next init - container. Instead, the next init container starts immediately after this - init container is started, or after any startupProbe has successfully - completed. - type: string - securityContext: - description: |- - SecurityContext defines the security options the container should be run with. - If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. - More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/ - properties: - allowPrivilegeEscalation: - description: |- - AllowPrivilegeEscalation controls whether a process can gain more - privileges than its parent process. This bool directly controls if - the no_new_privs flag will be set on the container process. - AllowPrivilegeEscalation is true always when the container is: - 1) run as Privileged - 2) has CAP_SYS_ADMIN - Note that this field cannot be set when spec.os.name is windows. - type: boolean - capabilities: - description: |- - The capabilities to add/drop when running containers. - Defaults to the default set of capabilities granted by the container runtime. - Note that this field cannot be set when spec.os.name is windows. - properties: - add: - description: Added capabilities - items: - description: - Capability represent POSIX - capabilities type - type: string - type: array - drop: - description: Removed capabilities - items: - description: - Capability represent POSIX - capabilities type - type: string - type: array - type: object - privileged: - description: |- - Run container in privileged mode. - Processes in privileged containers are essentially equivalent to root on the host. - Defaults to false. - Note that this field cannot be set when spec.os.name is windows. - type: boolean - procMount: - description: |- - procMount denotes the type of proc mount to use for the containers. - The default is DefaultProcMount which uses the container runtime defaults for - readonly paths and masked paths. - This requires the ProcMountType feature flag to be enabled. - Note that this field cannot be set when spec.os.name is windows. - type: string - readOnlyRootFilesystem: - description: |- - Whether this container has a read-only root filesystem. - Default is false. - Note that this field cannot be set when spec.os.name is windows. - type: boolean - runAsGroup: - description: |- - The GID to run the entrypoint of the container process. - Uses runtime default if unset. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is windows. - format: int64 - type: integer - runAsNonRoot: - description: |- - Indicates that the container must run as a non-root user. - If true, the Kubelet will validate the image at runtime to ensure that it - does not run as UID 0 (root) and fail to start the container if it does. - If unset or false, no such validation will be performed. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - type: boolean - runAsUser: - description: |- - The UID to run the entrypoint of the container process. - Defaults to user specified in image metadata if unspecified. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is windows. - format: int64 - type: integer - seLinuxOptions: - description: |- - The SELinux context to be applied to the container. - If unspecified, the container runtime will allocate a random SELinux context for each - container. May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is windows. - properties: - level: - description: - Level is SELinux level label - that applies to the container. - type: string - role: - description: - Role is a SELinux role label - that applies to the container. - type: string - type: - description: - Type is a SELinux type label - that applies to the container. - type: string - user: - description: - User is a SELinux user label - that applies to the container. - type: string - type: object - seccompProfile: - description: |- - The seccomp options to use by this container. If seccomp options are - provided at both the pod & container level, the container options - override the pod options. - Note that this field cannot be set when spec.os.name is windows. - properties: - localhostProfile: - description: |- - localhostProfile indicates a profile defined in a file on the node should be used. - The profile must be preconfigured on the node to work. - Must be a descending path, relative to the kubelet's configured seccomp profile location. - Must be set if type is "Localhost". Must NOT be set for any other type. - type: string - type: - description: |- - type indicates which kind of seccomp profile will be applied. - Valid options are: - - - Localhost - a profile defined in a file on the node should be used. - RuntimeDefault - the container runtime default profile should be used. - Unconfined - no profile should be applied. - type: string - required: - - type - type: object - windowsOptions: - description: |- - The Windows specific settings applied to all containers. - If unspecified, the options from the PodSecurityContext will be used. - If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is linux. - properties: - gmsaCredentialSpec: - description: |- - GMSACredentialSpec is where the GMSA admission webhook - (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the - GMSA credential spec named by the GMSACredentialSpecName field. - type: string - gmsaCredentialSpecName: - description: - GMSACredentialSpecName is the - name of the GMSA credential spec to use. - type: string - hostProcess: - description: |- - HostProcess determines if a container should be run as a 'Host Process' container. - All of a Pod's containers must have the same effective HostProcess value - (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). - In addition, if HostProcess is true then HostNetwork must also be set to true. - type: boolean - runAsUserName: - description: |- - The UserName in Windows to run the entrypoint of the container process. - Defaults to the user specified in image metadata if unspecified. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - type: string - type: object - type: object - startupProbe: - description: |- - StartupProbe indicates that the Pod has successfully initialized. - If specified, no other probes are executed until this completes successfully. - If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. - This can be used to provide different probe parameters at the beginning of a Pod's lifecycle, - when it might take a long time to load data or warm a cache, than during steady-state operation. - This cannot be updated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - properties: - exec: - description: Exec specifies the action to take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - failureThreshold: - description: |- - Minimum consecutive failures for the probe to be considered failed after having succeeded. - Defaults to 3. Minimum value is 1. - format: int32 - type: integer - grpc: - description: - GRPC specifies an action involving - a GRPC port. - properties: - port: - description: - Port number of the gRPC service. - Number must be in the range 1 to 65535. - format: int32 - type: integer - service: - description: |- - Service is the name of the service to place in the gRPC HealthCheckRequest - (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). - - - If this is not specified, the default behavior is defined by gRPC. - type: string - required: - - port - type: object - httpGet: - description: - HTTPGet specifies the http request - to perform. - properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in the - request. HTTP allows repeated headers. - items: - description: - HTTPHeader describes a custom - header to be used in HTTP probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: The header field value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: - description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. - type: string - required: - - port - type: object - initialDelaySeconds: - description: |- - Number of seconds after the container has started before liveness probes are initiated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - periodSeconds: - description: |- - How often (in seconds) to perform the probe. - Default to 10 seconds. Minimum value is 1. - format: int32 - type: integer - successThreshold: - description: |- - Minimum consecutive successes for the probe to be considered successful after having failed. - Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. - format: int32 - type: integer - tcpSocket: - description: - TCPSocket specifies an action involving - a TCP port. - properties: - host: - description: - "Optional: Host name to connect - to, defaults to the pod IP." - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - required: - - port - type: object - terminationGracePeriodSeconds: - description: |- - Optional duration in seconds the pod needs to terminate gracefully upon probe failure. - The grace period is the duration in seconds after the processes running in the pod are sent - a termination signal and the time when the processes are forcibly halted with a kill signal. - Set this value longer than the expected cleanup time for your process. - If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this - value overrides the value provided by the pod spec. - Value must be non-negative integer. The value zero indicates stop immediately via - the kill signal (no opportunity to shut down). - This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. - Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. - format: int64 - type: integer - timeoutSeconds: - description: |- - Number of seconds after which the probe times out. - Defaults to 1 second. Minimum value is 1. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - type: object - stdin: - description: |- - Whether this container should allocate a buffer for stdin in the container runtime. If this - is not set, reads from stdin in the container will always result in EOF. - Default is false. - type: boolean - stdinOnce: - description: |- - Whether the container runtime should close the stdin channel after it has been opened by - a single attach. When stdin is true the stdin stream will remain open across multiple attach - sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the - first client attaches to stdin, and then remains open and accepts data until the client disconnects, - at which time stdin is closed and remains closed until the container is restarted. If this - flag is false, a container processes that reads from stdin will never receive an EOF. - Default is false - type: boolean - terminationMessagePath: - description: |- - Optional: Path at which the file to which the container's termination message - will be written is mounted into the container's filesystem. - Message written is intended to be brief final status, such as an assertion failure message. - Will be truncated by the node if greater than 4096 bytes. The total message length across - all containers will be limited to 12kb. - Defaults to /dev/termination-log. - Cannot be updated. - type: string - terminationMessagePolicy: - description: |- - Indicate how the termination message should be populated. File will use the contents of - terminationMessagePath to populate the container status message on both success and failure. - FallbackToLogsOnError will use the last chunk of container log output if the termination - message file is empty and the container exited with an error. - The log output is limited to 2048 bytes or 80 lines, whichever is smaller. - Defaults to File. - Cannot be updated. - type: string - tty: - description: |- - Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. - Default is false. - type: boolean - volumeDevices: - description: - volumeDevices is the list of block - devices to be used by the container. - items: - description: - volumeDevice describes a mapping - of a raw block device within a container. + windowsOptions: + description: |- + The Windows specific settings applied to all containers. + If unspecified, the options from the PodSecurityContext will be used. + If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is linux. properties: - devicePath: - description: - devicePath is the path inside - of the container that the device will be - mapped to. + gmsaCredentialSpec: + description: |- + GMSACredentialSpec is where the GMSA admission webhook + (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the + GMSA credential spec named by the GMSACredentialSpecName field. type: string - name: - description: - name must match the name of a - persistentVolumeClaim in the pod + gmsaCredentialSpecName: + description: GMSACredentialSpecName is the + name of the GMSA credential spec to use. + type: string + hostProcess: + description: |- + HostProcess determines if a container should be run as a 'Host Process' container. + All of a Pod's containers must have the same effective HostProcess value + (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). + In addition, if HostProcess is true then HostNetwork must also be set to true. + type: boolean + runAsUserName: + description: |- + The UserName in Windows to run the entrypoint of the container process. + Defaults to the user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. type: string - required: - - devicePath - - name type: object - type: array - volumeMounts: - description: |- - Pod volumes to mount into the container's filesystem. - Cannot be updated. - items: - description: - VolumeMount describes a mounting - of a Volume within a container. + type: object + startupProbe: + description: |- + StartupProbe indicates that the Pod has successfully initialized. + If specified, no other probes are executed until this completes successfully. + If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. + This can be used to provide different probe parameters at the beginning of a Pod's lifecycle, + when it might take a long time to load data or warm a cache, than during steady-state operation. + This cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies the action to take. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies an action involving + a GRPC port. properties: - mountPath: + port: + description: Port number of the gRPC service. + Number must be in the range 1 to 65535. + format: int32 + type: integer + service: description: |- - Path within the container at which the volume should be mounted. Must - not contain ':'. + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + + If this is not specified, the default behavior is defined by gRPC. type: string - mountPropagation: + required: + - port + type: object + httpGet: + description: HTTPGet specifies the http request + to perform. + properties: + host: description: |- - mountPropagation determines how mounts are propagated from the host - to container and the other way around. - When not set, MountPropagationNone is used. - This field is beta in 1.10. + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. type: string - name: - description: - This must match the Name of a - Volume. + httpHeaders: + description: Custom headers to set in the + request. HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. type: string - readOnly: + port: + anyOf: + - type: integer + - type: string description: |- - Mounted read-only if true, read-write otherwise (false or unspecified). - Defaults to false. - type: boolean - subPath: + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: description: |- - Path within the volume from which the container's volume should be mounted. - Defaults to "" (volume's root). + Scheme to use for connecting to the host. + Defaults to HTTP. type: string - subPathExpr: - description: |- - Expanded path within the volume from which the container's volume should be mounted. - Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. - Defaults to "" (volume's root). - SubPathExpr and SubPath are mutually exclusive. + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies an action involving + a TCP port. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true required: - - mountPath - - name + - port type: object - type: array - workingDir: - description: |- - Container's working directory. - If not specified, the container runtime's default will be used, which - might be configured in the container image. - Cannot be updated. - type: string - required: - - name - type: object - type: array - dnsConfig: - description: |- - Specifies the DNS parameters of a pod. - Parameters specified here will be merged to the generated DNS - configuration based on DNSPolicy. - properties: - nameservers: + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + stdin: + description: |- + Whether this container should allocate a buffer for stdin in the container runtime. If this + is not set, reads from stdin in the container will always result in EOF. + Default is false. + type: boolean + stdinOnce: + description: |- + Whether the container runtime should close the stdin channel after it has been opened by + a single attach. When stdin is true the stdin stream will remain open across multiple attach + sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the + first client attaches to stdin, and then remains open and accepts data until the client disconnects, + at which time stdin is closed and remains closed until the container is restarted. If this + flag is false, a container processes that reads from stdin will never receive an EOF. + Default is false + type: boolean + terminationMessagePath: + description: |- + Optional: Path at which the file to which the container's termination message + will be written is mounted into the container's filesystem. + Message written is intended to be brief final status, such as an assertion failure message. + Will be truncated by the node if greater than 4096 bytes. The total message length across + all containers will be limited to 12kb. + Defaults to /dev/termination-log. + Cannot be updated. + type: string + terminationMessagePolicy: + description: |- + Indicate how the termination message should be populated. File will use the contents of + terminationMessagePath to populate the container status message on both success and failure. + FallbackToLogsOnError will use the last chunk of container log output if the termination + message file is empty and the container exited with an error. + The log output is limited to 2048 bytes or 80 lines, whichever is smaller. + Defaults to File. + Cannot be updated. + type: string + tty: description: |- - A list of DNS name server IP addresses. - This will be appended to the base nameservers generated from DNSPolicy. - Duplicated nameservers will be removed. + Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. + Default is false. + type: boolean + volumeDevices: + description: volumeDevices is the list of block + devices to be used by the container. items: - type: string + description: volumeDevice describes a mapping + of a raw block device within a container. + properties: + devicePath: + description: devicePath is the path inside + of the container that the device will be + mapped to. + type: string + name: + description: name must match the name of a + persistentVolumeClaim in the pod + type: string + required: + - devicePath + - name + type: object type: array - options: + volumeMounts: description: |- - A list of DNS resolver options. - This will be merged with the base options generated from DNSPolicy. - Duplicated entries will be removed. Resolution options given in Options - will override those that appear in the base DNSPolicy. + Pod volumes to mount into the container's filesystem. + Cannot be updated. items: - description: - PodDNSConfigOption defines DNS resolver - options of a pod. + description: VolumeMount describes a mounting + of a Volume within a container. properties: + mountPath: + description: |- + Path within the container at which the volume should be mounted. Must + not contain ':'. + type: string + mountPropagation: + description: |- + mountPropagation determines how mounts are propagated from the host + to container and the other way around. + When not set, MountPropagationNone is used. + This field is beta in 1.10. + type: string name: - description: Required. + description: This must match the Name of a + Volume. type: string - value: + readOnly: + description: |- + Mounted read-only if true, read-write otherwise (false or unspecified). + Defaults to false. + type: boolean + subPath: + description: |- + Path within the volume from which the container's volume should be mounted. + Defaults to "" (volume's root). + type: string + subPathExpr: + description: |- + Expanded path within the volume from which the container's volume should be mounted. + Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. + Defaults to "" (volume's root). + SubPathExpr and SubPath are mutually exclusive. type: string + required: + - mountPath + - name type: object type: array - searches: + workingDir: description: |- - A list of DNS search domains for host-name lookup. - This will be appended to the base search paths generated from DNSPolicy. - Duplicated search paths will be removed. - items: - type: string - type: array + Container's working directory. + If not specified, the container runtime's default will be used, which + might be configured in the container image. + Cannot be updated. + type: string + required: + - name type: object - dnsPolicy: - description: |- - Set DNS policy for the pod. - Defaults to "ClusterFirst". - Valid values are 'ClusterFirstWithHostNet', 'ClusterFirst', 'Default' or 'None'. - DNS parameters given in DNSConfig will be merged with the policy selected with DNSPolicy. - To have DNS options set along with hostNetwork, you have to specify DNS policy - explicitly to 'ClusterFirstWithHostNet'. - type: string - enableServiceLinks: - description: |- - EnableServiceLinks indicates whether information about services should be injected into pod's - environment variables, matching the syntax of Docker links. - Optional: Defaults to true. - type: boolean - ephemeralContainers: - description: |- - List of ephemeral containers run in this pod. Ephemeral containers may be run in an existing - pod to perform user-initiated actions such as debugging. This list cannot be specified when - creating a pod, and it cannot be modified by updating the pod spec. In order to add an - ephemeral container to an existing pod, use the pod's ephemeralcontainers subresource. - items: + type: array + dnsConfig: + description: |- + Specifies the DNS parameters of a pod. + Parameters specified here will be merged to the generated DNS + configuration based on DNSPolicy. + properties: + nameservers: description: |- - An EphemeralContainer is a temporary container that you may add to an existing Pod for - user-initiated activities such as debugging. Ephemeral containers have no resource or - scheduling guarantees, and they will not be restarted when they exit or when a Pod is - removed or restarted. The kubelet may evict a Pod if an ephemeral container causes the - Pod to exceed its resource allocation. - - - To add an ephemeral container, use the ephemeralcontainers subresource of an existing - Pod. Ephemeral containers may not be removed or restarted. - properties: - args: - description: |- - Arguments to the entrypoint. - The image's CMD is used if this is not provided. - Variable references $(VAR_NAME) are expanded using the container's environment. If a variable - cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced - to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will - produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless - of whether the variable exists or not. Cannot be updated. - More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell - items: + A list of DNS name server IP addresses. + This will be appended to the base nameservers generated from DNSPolicy. + Duplicated nameservers will be removed. + items: + type: string + type: array + options: + description: |- + A list of DNS resolver options. + This will be merged with the base options generated from DNSPolicy. + Duplicated entries will be removed. Resolution options given in Options + will override those that appear in the base DNSPolicy. + items: + description: PodDNSConfigOption defines DNS resolver + options of a pod. + properties: + name: + description: Required. type: string - type: array - command: - description: |- - Entrypoint array. Not executed within a shell. - The image's ENTRYPOINT is used if this is not provided. - Variable references $(VAR_NAME) are expanded using the container's environment. If a variable - cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced - to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will - produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless - of whether the variable exists or not. Cannot be updated. - More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell - items: + value: type: string - type: array - env: - description: |- - List of environment variables to set in the container. - Cannot be updated. - items: - description: - EnvVar represents an environment - variable present in a Container. - properties: - name: - description: - Name of the environment variable. - Must be a C_IDENTIFIER. - type: string - value: - description: |- - Variable references $(VAR_NAME) are expanded - using the previously defined environment variables in the container and - any service environment variables. If a variable cannot be resolved, - the reference in the input string will be unchanged. Double $$ are reduced - to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. - "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". - Escaped references will never be expanded, regardless of whether the variable - exists or not. - Defaults to "". - type: string - valueFrom: - description: - Source for the environment variable's - value. Cannot be used if value is not empty. - properties: - configMapKeyRef: - description: Selects a key of a ConfigMap. - properties: - key: - description: The key to select. - type: string - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - Specify whether the ConfigMap - or its key must be defined - type: boolean - required: - - key - type: object - x-kubernetes-map-type: atomic - fieldRef: - description: |- - Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['']`, `metadata.annotations['']`, - spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs. - properties: - apiVersion: - description: - Version of the schema - the FieldPath is written in terms - of, defaults to "v1". - type: string - fieldPath: - description: - Path of the field to - select in the specified API version. - type: string - required: - - fieldPath - type: object - x-kubernetes-map-type: atomic - resourceFieldRef: - description: |- - Selects a resource of the container: only resources limits and requests - (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported. - properties: - containerName: - description: - "Container name: required - for volumes, optional for env vars" - type: string - divisor: - anyOf: - - type: integer - - type: string - description: - Specifies the output - format of the exposed resources, - defaults to "1" - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ - x-kubernetes-int-or-string: true - resource: - description: - "Required: resource to - select" - type: string - required: - - resource - type: object - x-kubernetes-map-type: atomic - secretKeyRef: - description: - Selects a key of a secret - in the pod's namespace - properties: - key: - description: - The key of the secret - to select from. Must be a valid - secret key. - type: string - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - Specify whether the Secret - or its key must be defined - type: boolean - required: - - key - type: object - x-kubernetes-map-type: atomic - type: object - required: - - name - type: object - type: array - envFrom: - description: |- - List of sources to populate environment variables in the container. - The keys defined within a source must be a C_IDENTIFIER. All invalid keys - will be reported as an event when the container is starting. When a key exists in multiple - sources, the value associated with the last source will take precedence. - Values defined by an Env with a duplicate key will take precedence. - Cannot be updated. - items: - description: - EnvFromSource represents the source - of a set of ConfigMaps - properties: - configMapRef: - description: The ConfigMap to select from - properties: - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - Specify whether the ConfigMap - must be defined - type: boolean - type: object - x-kubernetes-map-type: atomic - prefix: - description: - An optional identifier to prepend - to each key in the ConfigMap. Must be a - C_IDENTIFIER. - type: string - secretRef: - description: The Secret to select from - properties: - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - Specify whether the Secret - must be defined - type: boolean - type: object - x-kubernetes-map-type: atomic - type: object - type: array - image: - description: |- - Container image name. - More info: https://kubernetes.io/docs/concepts/containers/images + type: object + type: array + searches: + description: |- + A list of DNS search domains for host-name lookup. + This will be appended to the base search paths generated from DNSPolicy. + Duplicated search paths will be removed. + items: + type: string + type: array + type: object + dnsPolicy: + description: |- + Set DNS policy for the pod. + Defaults to "ClusterFirst". + Valid values are 'ClusterFirstWithHostNet', 'ClusterFirst', 'Default' or 'None'. + DNS parameters given in DNSConfig will be merged with the policy selected with DNSPolicy. + To have DNS options set along with hostNetwork, you have to specify DNS policy + explicitly to 'ClusterFirstWithHostNet'. + type: string + enableServiceLinks: + description: |- + EnableServiceLinks indicates whether information about services should be injected into pod's + environment variables, matching the syntax of Docker links. + Optional: Defaults to true. + type: boolean + ephemeralContainers: + description: |- + List of ephemeral containers run in this pod. Ephemeral containers may be run in an existing + pod to perform user-initiated actions such as debugging. This list cannot be specified when + creating a pod, and it cannot be modified by updating the pod spec. In order to add an + ephemeral container to an existing pod, use the pod's ephemeralcontainers subresource. + items: + description: |- + An EphemeralContainer is a temporary container that you may add to an existing Pod for + user-initiated activities such as debugging. Ephemeral containers have no resource or + scheduling guarantees, and they will not be restarted when they exit or when a Pod is + removed or restarted. The kubelet may evict a Pod if an ephemeral container causes the + Pod to exceed its resource allocation. + + + To add an ephemeral container, use the ephemeralcontainers subresource of an existing + Pod. Ephemeral containers may not be removed or restarted. + properties: + args: + description: |- + Arguments to the entrypoint. + The image's CMD is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: type: string - imagePullPolicy: - description: |- - Image pull policy. - One of Always, Never, IfNotPresent. - Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. - Cannot be updated. - More info: https://kubernetes.io/docs/concepts/containers/images#updating-images + type: array + command: + description: |- + Entrypoint array. Not executed within a shell. + The image's ENTRYPOINT is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: type: string - lifecycle: - description: - Lifecycle is not allowed for ephemeral - containers. + type: array + env: + description: |- + List of environment variables to set in the container. + Cannot be updated. + items: + description: EnvVar represents an environment + variable present in a Container. properties: - postStart: + name: + description: Name of the environment variable. + Must be a C_IDENTIFIER. + type: string + value: description: |- - PostStart is called immediately after a container is created. If the handler fails, - the container is terminated and restarted according to its restart policy. - Other management of the container blocks until the hook completes. - More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks - properties: - exec: - description: - Exec specifies the action to - take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - httpGet: - description: - HTTPGet specifies the http - request to perform. + Variable references $(VAR_NAME) are expanded + using the previously defined environment variables in the container and + any service environment variables. If a variable cannot be resolved, + the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. + "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". + Escaped references will never be expanded, regardless of whether the variable + exists or not. + Defaults to "". + type: string + valueFrom: + description: Source for the environment variable's + value. Cannot be used if value is not empty. + properties: + configMapKeyRef: + description: Selects a key of a ConfigMap. properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in - the request. HTTP allows repeated - headers. - items: - description: - HTTPHeader describes - a custom header to be used in HTTP - probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: - The header field - value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. + key: + description: The key to select. type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: + name: description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? type: string + optional: + description: Specify whether the ConfigMap + or its key must be defined + type: boolean required: - - port - type: object - sleep: - description: - Sleep represents the duration - that the container should sleep before - being terminated. - properties: - seconds: - description: - Seconds is the number of - seconds to sleep. - format: int64 - type: integer - required: - - seconds + - key type: object - tcpSocket: + x-kubernetes-map-type: atomic + fieldRef: description: |- - Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept - for the backward compatibility. There are no validation of this field and - lifecycle hooks will fail in runtime when tcp handler is specified. + Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['']`, `metadata.annotations['']`, + spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs. properties: - host: - description: - "Optional: Host name to - connect to, defaults to the pod IP." + apiVersion: + description: Version of the schema + the FieldPath is written in terms + of, defaults to "v1". + type: string + fieldPath: + description: Path of the field to + select in the specified API version. type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true required: - - port - type: object - type: object - preStop: - description: |- - PreStop is called immediately before a container is terminated due to an - API request or management event such as liveness/startup probe failure, - preemption, resource contention, etc. The handler is not called if the - container crashes or exits. The Pod's termination grace period countdown begins before the - PreStop hook is executed. Regardless of the outcome of the handler, the - container will eventually terminate within the Pod's termination grace - period (unless delayed by finalizers). Other management of the container blocks until the hook completes - or until the termination grace period is reached. - More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks - properties: - exec: - description: - Exec specifies the action to - take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array + - fieldPath type: object - httpGet: - description: - HTTPGet specifies the http - request to perform. + x-kubernetes-map-type: atomic + resourceFieldRef: + description: |- + Selects a resource of the container: only resources limits and requests + (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported. properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in - the request. HTTP allows repeated - headers. - items: - description: - HTTPHeader describes - a custom header to be used in HTTP - probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: - The header field - value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. + containerName: + description: 'Container name: required + for volumes, optional for env vars' type: string - port: + divisor: anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. + - type: integer + - type: string + description: Specifies the output + format of the exposed resources, + defaults to "1" + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ x-kubernetes-int-or-string: true - scheme: - description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. + resource: + description: 'Required: resource to + select' type: string required: - - port - type: object - sleep: - description: - Sleep represents the duration - that the container should sleep before - being terminated. - properties: - seconds: - description: - Seconds is the number of - seconds to sleep. - format: int64 - type: integer - required: - - seconds + - resource type: object - tcpSocket: - description: |- - Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept - for the backward compatibility. There are no validation of this field and - lifecycle hooks will fail in runtime when tcp handler is specified. + x-kubernetes-map-type: atomic + secretKeyRef: + description: Selects a key of a secret + in the pod's namespace properties: - host: - description: - "Optional: Host name to - connect to, defaults to the pod IP." + key: + description: The key of the secret + to select from. Must be a valid + secret key. type: string - port: - anyOf: - - type: integer - - type: string + name: description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + optional: + description: Specify whether the Secret + or its key must be defined + type: boolean required: - - port + - key type: object + x-kubernetes-map-type: atomic type: object + required: + - name type: object - livenessProbe: - description: - Probes are not allowed for ephemeral - containers. + type: array + envFrom: + description: |- + List of sources to populate environment variables in the container. + The keys defined within a source must be a C_IDENTIFIER. All invalid keys + will be reported as an event when the container is starting. When a key exists in multiple + sources, the value associated with the last source will take precedence. + Values defined by an Env with a duplicate key will take precedence. + Cannot be updated. + items: + description: EnvFromSource represents the source + of a set of ConfigMaps properties: - exec: - description: Exec specifies the action to take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - failureThreshold: - description: |- - Minimum consecutive failures for the probe to be considered failed after having succeeded. - Defaults to 3. Minimum value is 1. - format: int32 - type: integer - grpc: - description: - GRPC specifies an action involving - a GRPC port. + configMapRef: + description: The ConfigMap to select from properties: - port: - description: - Port number of the gRPC service. - Number must be in the range 1 to 65535. - format: int32 - type: integer - service: + name: description: |- - Service is the name of the service to place in the gRPC HealthCheckRequest - (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). - - - If this is not specified, the default behavior is defined by gRPC. + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? type: string - required: - - port + optional: + description: Specify whether the ConfigMap + must be defined + type: boolean type: object - httpGet: - description: - HTTPGet specifies the http request - to perform. + x-kubernetes-map-type: atomic + prefix: + description: An optional identifier to prepend + to each key in the ConfigMap. Must be a + C_IDENTIFIER. + type: string + secretRef: + description: The Secret to select from properties: - host: + name: description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? type: string - httpHeaders: - description: - Custom headers to set in the - request. HTTP allows repeated headers. - items: - description: - HTTPHeader describes a custom - header to be used in HTTP probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: The header field value - type: string - required: + optional: + description: Specify whether the Secret + must be defined + type: boolean + type: object + x-kubernetes-map-type: atomic + type: object + type: array + image: + description: |- + Container image name. + More info: https://kubernetes.io/docs/concepts/containers/images + type: string + imagePullPolicy: + description: |- + Image pull policy. + One of Always, Never, IfNotPresent. + Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/containers/images#updating-images + type: string + lifecycle: + description: Lifecycle is not allowed for ephemeral + containers. + properties: + postStart: + description: |- + PostStart is called immediately after a container is created. If the handler fails, + the container is terminated and restarted according to its restart policy. + Other management of the container blocks until the hook completes. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks + properties: + exec: + description: Exec specifies the action to + take. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + httpGet: + description: HTTPGet specifies the http + request to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in + the request. HTTP allows repeated + headers. + items: + description: HTTPHeader describes + a custom header to be used in HTTP + probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field + value + type: string + required: - name - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. - type: string - port: - anyOf: + type: object + type: array + path: + description: Path to access on the HTTP + server. + type: string + port: + anyOf: - type: integer - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: - description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. - type: string - required: + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: - port - type: object - initialDelaySeconds: - description: |- - Number of seconds after the container has started before liveness probes are initiated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - periodSeconds: - description: |- - How often (in seconds) to perform the probe. - Default to 10 seconds. Minimum value is 1. - format: int32 - type: integer - successThreshold: - description: |- - Minimum consecutive successes for the probe to be considered successful after having failed. - Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. - format: int32 - type: integer - tcpSocket: - description: - TCPSocket specifies an action involving - a TCP port. - properties: - host: - description: - "Optional: Host name to connect - to, defaults to the pod IP." - type: string - port: - anyOf: + type: object + sleep: + description: Sleep represents the duration + that the container should sleep before + being terminated. + properties: + seconds: + description: Seconds is the number of + seconds to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for the backward compatibility. There are no validation of this field and + lifecycle hooks will fail in runtime when tcp handler is specified. + properties: + host: + description: 'Optional: Host name to + connect to, defaults to the pod IP.' + type: string + port: + anyOf: - type: integer - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - required: + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: - port - type: object - terminationGracePeriodSeconds: - description: |- - Optional duration in seconds the pod needs to terminate gracefully upon probe failure. - The grace period is the duration in seconds after the processes running in the pod are sent - a termination signal and the time when the processes are forcibly halted with a kill signal. - Set this value longer than the expected cleanup time for your process. - If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this - value overrides the value provided by the pod spec. - Value must be non-negative integer. The value zero indicates stop immediately via - the kill signal (no opportunity to shut down). - This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. - Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. - format: int64 - type: integer - timeoutSeconds: - description: |- - Number of seconds after which the probe times out. - Defaults to 1 second. Minimum value is 1. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - type: object - name: - description: |- - Name of the ephemeral container specified as a DNS_LABEL. - This name must be unique among all containers, init containers and ephemeral containers. - type: string - ports: - description: - Ports are not allowed for ephemeral - containers. - items: - description: - ContainerPort represents a network - port in a single container. + type: object + type: object + preStop: + description: |- + PreStop is called immediately before a container is terminated due to an + API request or management event such as liveness/startup probe failure, + preemption, resource contention, etc. The handler is not called if the + container crashes or exits. The Pod's termination grace period countdown begins before the + PreStop hook is executed. Regardless of the outcome of the handler, the + container will eventually terminate within the Pod's termination grace + period (unless delayed by finalizers). Other management of the container blocks until the hook completes + or until the termination grace period is reached. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks properties: - containerPort: + exec: + description: Exec specifies the action to + take. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + httpGet: + description: HTTPGet specifies the http + request to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in + the request. HTTP allows repeated + headers. + items: + description: HTTPHeader describes + a custom header to be used in HTTP + probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field + value + type: string + required: + - name + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + sleep: + description: Sleep represents the duration + that the container should sleep before + being terminated. + properties: + seconds: + description: Seconds is the number of + seconds to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: description: |- - Number of port to expose on the pod's IP address. - This must be a valid port number, 0 < x < 65536. - format: int32 - type: integer - hostIP: - description: - What host IP to bind the external - port to. - type: string - hostPort: + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for the backward compatibility. There are no validation of this field and + lifecycle hooks will fail in runtime when tcp handler is specified. + properties: + host: + description: 'Optional: Host name to + connect to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + type: object + type: object + livenessProbe: + description: Probes are not allowed for ephemeral + containers. + properties: + exec: + description: Exec specifies the action to take. + properties: + command: description: |- - Number of port to expose on the host. - If specified, this must be a valid port number, 0 < x < 65536. - If HostNetwork is specified, this must match ContainerPort. - Most containers do not need this. + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies an action involving + a GRPC port. + properties: + port: + description: Port number of the gRPC service. + Number must be in the range 1 to 65535. format: int32 type: integer - name: + service: + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies the http request + to perform. + properties: + host: description: |- - If specified, this must be an IANA_SVC_NAME and unique within the pod. Each - named port in a pod must have a unique name. Name for the port that can be - referred to by services. + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the + request. HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. type: string - protocol: - default: TCP + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: description: |- - Protocol for port. Must be UDP, TCP, or SCTP. - Defaults to "TCP". + Scheme to use for connecting to the host. + Defaults to HTTP. type: string required: - - containerPort + - port type: object - type: array - x-kubernetes-list-map-keys: - - containerPort - - protocol - x-kubernetes-list-type: map - readinessProbe: - description: - Probes are not allowed for ephemeral - containers. + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies an action involving + a TCP port. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + name: + description: |- + Name of the ephemeral container specified as a DNS_LABEL. + This name must be unique among all containers, init containers and ephemeral containers. + type: string + ports: + description: Ports are not allowed for ephemeral + containers. + items: + description: ContainerPort represents a network + port in a single container. properties: - exec: - description: Exec specifies the action to take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - failureThreshold: - description: |- - Minimum consecutive failures for the probe to be considered failed after having succeeded. - Defaults to 3. Minimum value is 1. - format: int32 - type: integer - grpc: - description: - GRPC specifies an action involving - a GRPC port. - properties: - port: - description: - Port number of the gRPC service. - Number must be in the range 1 to 65535. - format: int32 - type: integer - service: - description: |- - Service is the name of the service to place in the gRPC HealthCheckRequest - (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). - - - If this is not specified, the default behavior is defined by gRPC. - type: string - required: - - port - type: object - httpGet: - description: - HTTPGet specifies the http request - to perform. - properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in the - request. HTTP allows repeated headers. - items: - description: - HTTPHeader describes a custom - header to be used in HTTP probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: The header field value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: - description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. - type: string - required: - - port - type: object - initialDelaySeconds: - description: |- - Number of seconds after the container has started before liveness probes are initiated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - periodSeconds: + containerPort: description: |- - How often (in seconds) to perform the probe. - Default to 10 seconds. Minimum value is 1. + Number of port to expose on the pod's IP address. + This must be a valid port number, 0 < x < 65536. format: int32 type: integer - successThreshold: + hostIP: + description: What host IP to bind the external + port to. + type: string + hostPort: description: |- - Minimum consecutive successes for the probe to be considered successful after having failed. - Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + Number of port to expose on the host. + If specified, this must be a valid port number, 0 < x < 65536. + If HostNetwork is specified, this must match ContainerPort. + Most containers do not need this. format: int32 type: integer - tcpSocket: - description: - TCPSocket specifies an action involving - a TCP port. - properties: - host: - description: - "Optional: Host name to connect - to, defaults to the pod IP." - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - required: - - port - type: object - terminationGracePeriodSeconds: + name: description: |- - Optional duration in seconds the pod needs to terminate gracefully upon probe failure. - The grace period is the duration in seconds after the processes running in the pod are sent - a termination signal and the time when the processes are forcibly halted with a kill signal. - Set this value longer than the expected cleanup time for your process. - If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this - value overrides the value provided by the pod spec. - Value must be non-negative integer. The value zero indicates stop immediately via - the kill signal (no opportunity to shut down). - This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. - Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. - format: int64 - type: integer - timeoutSeconds: + If specified, this must be an IANA_SVC_NAME and unique within the pod. Each + named port in a pod must have a unique name. Name for the port that can be + referred to by services. + type: string + protocol: + default: TCP description: |- - Number of seconds after which the probe times out. - Defaults to 1 second. Minimum value is 1. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer + Protocol for port. Must be UDP, TCP, or SCTP. + Defaults to "TCP". + type: string + required: + - containerPort type: object - resizePolicy: - description: Resources resize policy for the container. - items: - description: - ContainerResizePolicy represents - resource resize policy for the container. + type: array + x-kubernetes-list-map-keys: + - containerPort + - protocol + x-kubernetes-list-type: map + readinessProbe: + description: Probes are not allowed for ephemeral + containers. + properties: + exec: + description: Exec specifies the action to take. properties: - resourceName: + command: description: |- - Name of the resource to which this resource resize policy applies. - Supported values: cpu, memory. - type: string - restartPolicy: + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies an action involving + a GRPC port. + properties: + port: + description: Port number of the gRPC service. + Number must be in the range 1 to 65535. + format: int32 + type: integer + service: description: |- - Restart policy to apply when specified resource is resized. - If not specified, it defaults to NotRequired. + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + + If this is not specified, the default behavior is defined by gRPC. type: string required: - - resourceName - - restartPolicy + - port type: object - type: array - x-kubernetes-list-type: atomic - resources: - description: |- - Resources are not allowed for ephemeral containers. Ephemeral containers use spare resources - already allocated to the pod. - properties: - claims: - description: |- - Claims lists the names of resources, defined in spec.resourceClaims, - that are used by this container. - - - This is an alpha field and requires enabling the - DynamicResourceAllocation feature gate. - - - This field is immutable. It can only be set for containers. - items: - description: - ResourceClaim references one - entry in PodSpec.ResourceClaims. - properties: - name: - description: |- - Name must match the name of one entry in pod.spec.resourceClaims of - the Pod where this field is used. It makes that resource available - inside a container. - type: string - required: + httpGet: + description: HTTPGet specifies the http request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the + request. HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: - name - type: object - type: array - x-kubernetes-list-map-keys: - - name - x-kubernetes-list-type: map - limits: - additionalProperties: + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. + type: string + port: anyOf: - - type: integer - - type: string - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. x-kubernetes-int-or-string: true - description: |- - Limits describes the maximum amount of compute resources allowed. - More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ - type: object - requests: - additionalProperties: + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies an action involving + a TCP port. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: anyOf: - - type: integer - - type: string - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. x-kubernetes-int-or-string: true - description: |- - Requests describes the minimum amount of compute resources required. - If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, - otherwise to an implementation-defined value. Requests cannot exceed Limits. - More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ - type: object - type: object - restartPolicy: - description: |- - Restart policy for the container to manage the restart behavior of each - container within a pod. - This may only be set for init containers. You cannot set this field on - ephemeral containers. - type: string - securityContext: - description: |- - Optional: SecurityContext defines the security options the ephemeral container should be run with. - If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + resizePolicy: + description: Resources resize policy for the container. + items: + description: ContainerResizePolicy represents + resource resize policy for the container. properties: - allowPrivilegeEscalation: + resourceName: description: |- - AllowPrivilegeEscalation controls whether a process can gain more - privileges than its parent process. This bool directly controls if - the no_new_privs flag will be set on the container process. - AllowPrivilegeEscalation is true always when the container is: - 1) run as Privileged - 2) has CAP_SYS_ADMIN - Note that this field cannot be set when spec.os.name is windows. - type: boolean - capabilities: + Name of the resource to which this resource resize policy applies. + Supported values: cpu, memory. + type: string + restartPolicy: description: |- - The capabilities to add/drop when running containers. - Defaults to the default set of capabilities granted by the container runtime. - Note that this field cannot be set when spec.os.name is windows. - properties: - add: - description: Added capabilities - items: - description: - Capability represent POSIX - capabilities type - type: string - type: array - drop: - description: Removed capabilities - items: - description: - Capability represent POSIX - capabilities type - type: string - type: array - type: object - privileged: - description: |- - Run container in privileged mode. - Processes in privileged containers are essentially equivalent to root on the host. - Defaults to false. - Note that this field cannot be set when spec.os.name is windows. - type: boolean - procMount: - description: |- - procMount denotes the type of proc mount to use for the containers. - The default is DefaultProcMount which uses the container runtime defaults for - readonly paths and masked paths. - This requires the ProcMountType feature flag to be enabled. - Note that this field cannot be set when spec.os.name is windows. + Restart policy to apply when specified resource is resized. + If not specified, it defaults to NotRequired. type: string - readOnlyRootFilesystem: - description: |- - Whether this container has a read-only root filesystem. - Default is false. - Note that this field cannot be set when spec.os.name is windows. - type: boolean - runAsGroup: - description: |- - The GID to run the entrypoint of the container process. - Uses runtime default if unset. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is windows. - format: int64 - type: integer - runAsNonRoot: - description: |- - Indicates that the container must run as a non-root user. - If true, the Kubelet will validate the image at runtime to ensure that it - does not run as UID 0 (root) and fail to start the container if it does. - If unset or false, no such validation will be performed. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - type: boolean - runAsUser: - description: |- - The UID to run the entrypoint of the container process. - Defaults to user specified in image metadata if unspecified. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is windows. - format: int64 - type: integer - seLinuxOptions: - description: |- - The SELinux context to be applied to the container. - If unspecified, the container runtime will allocate a random SELinux context for each - container. May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is windows. - properties: - level: - description: - Level is SELinux level label - that applies to the container. - type: string - role: - description: - Role is a SELinux role label - that applies to the container. - type: string - type: - description: - Type is a SELinux type label - that applies to the container. - type: string - user: - description: - User is a SELinux user label - that applies to the container. - type: string - type: object - seccompProfile: - description: |- - The seccomp options to use by this container. If seccomp options are - provided at both the pod & container level, the container options - override the pod options. - Note that this field cannot be set when spec.os.name is windows. - properties: - localhostProfile: - description: |- - localhostProfile indicates a profile defined in a file on the node should be used. - The profile must be preconfigured on the node to work. - Must be a descending path, relative to the kubelet's configured seccomp profile location. - Must be set if type is "Localhost". Must NOT be set for any other type. - type: string - type: - description: |- - type indicates which kind of seccomp profile will be applied. - Valid options are: + required: + - resourceName + - restartPolicy + type: object + type: array + x-kubernetes-list-type: atomic + resources: + description: |- + Resources are not allowed for ephemeral containers. Ephemeral containers use spare resources + already allocated to the pod. + properties: + claims: + description: |- + Claims lists the names of resources, defined in spec.resourceClaims, + that are used by this container. - Localhost - a profile defined in a file on the node should be used. - RuntimeDefault - the container runtime default profile should be used. - Unconfined - no profile should be applied. - type: string - required: - - type - type: object - windowsOptions: - description: |- - The Windows specific settings applied to all containers. - If unspecified, the options from the PodSecurityContext will be used. - If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is linux. - properties: - gmsaCredentialSpec: - description: |- - GMSACredentialSpec is where the GMSA admission webhook - (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the - GMSA credential spec named by the GMSACredentialSpecName field. - type: string - gmsaCredentialSpecName: - description: - GMSACredentialSpecName is the - name of the GMSA credential spec to use. - type: string - hostProcess: - description: |- - HostProcess determines if a container should be run as a 'Host Process' container. - All of a Pod's containers must have the same effective HostProcess value - (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). - In addition, if HostProcess is true then HostNetwork must also be set to true. - type: boolean - runAsUserName: - description: |- - The UserName in Windows to run the entrypoint of the container process. - Defaults to the user specified in image metadata if unspecified. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - type: string - type: object - type: object - startupProbe: - description: - Probes are not allowed for ephemeral - containers. - properties: - exec: - description: Exec specifies the action to take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - failureThreshold: - description: |- - Minimum consecutive failures for the probe to be considered failed after having succeeded. - Defaults to 3. Minimum value is 1. - format: int32 - type: integer - grpc: - description: - GRPC specifies an action involving - a GRPC port. - properties: - port: - description: - Port number of the gRPC service. - Number must be in the range 1 to 65535. - format: int32 - type: integer - service: - description: |- - Service is the name of the service to place in the gRPC HealthCheckRequest - (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + This is an alpha field and requires enabling the + DynamicResourceAllocation feature gate. - If this is not specified, the default behavior is defined by gRPC. - type: string - required: - - port - type: object - httpGet: - description: - HTTPGet specifies the http request - to perform. + This field is immutable. It can only be set for containers. + items: + description: ResourceClaim references one + entry in PodSpec.ResourceClaims. properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in the - request. HTTP allows repeated headers. - items: - description: - HTTPHeader describes a custom - header to be used in HTTP probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: The header field value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: + name: description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. + Name must match the name of one entry in pod.spec.resourceClaims of + the Pod where this field is used. It makes that resource available + inside a container. type: string required: - - port + - name type: object - initialDelaySeconds: - description: |- - Number of seconds after the container has started before liveness probes are initiated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - periodSeconds: - description: |- - How often (in seconds) to perform the probe. - Default to 10 seconds. Minimum value is 1. - format: int32 - type: integer - successThreshold: - description: |- - Minimum consecutive successes for the probe to be considered successful after having failed. - Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. - format: int32 - type: integer - tcpSocket: - description: - TCPSocket specifies an action involving - a TCP port. - properties: - host: - description: - "Optional: Host name to connect - to, defaults to the pod IP." + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + limits: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Limits describes the maximum amount of compute resources allowed. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + requests: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Requests describes the minimum amount of compute resources required. + If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, + otherwise to an implementation-defined value. Requests cannot exceed Limits. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + type: object + restartPolicy: + description: |- + Restart policy for the container to manage the restart behavior of each + container within a pod. + This may only be set for init containers. You cannot set this field on + ephemeral containers. + type: string + securityContext: + description: |- + Optional: SecurityContext defines the security options the ephemeral container should be run with. + If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. + properties: + allowPrivilegeEscalation: + description: |- + AllowPrivilegeEscalation controls whether a process can gain more + privileges than its parent process. This bool directly controls if + the no_new_privs flag will be set on the container process. + AllowPrivilegeEscalation is true always when the container is: + 1) run as Privileged + 2) has CAP_SYS_ADMIN + Note that this field cannot be set when spec.os.name is windows. + type: boolean + capabilities: + description: |- + The capabilities to add/drop when running containers. + Defaults to the default set of capabilities granted by the container runtime. + Note that this field cannot be set when spec.os.name is windows. + properties: + add: + description: Added capabilities + items: + description: Capability represent POSIX + capabilities type type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - required: - - port - type: object - terminationGracePeriodSeconds: - description: |- - Optional duration in seconds the pod needs to terminate gracefully upon probe failure. - The grace period is the duration in seconds after the processes running in the pod are sent - a termination signal and the time when the processes are forcibly halted with a kill signal. - Set this value longer than the expected cleanup time for your process. - If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this - value overrides the value provided by the pod spec. - Value must be non-negative integer. The value zero indicates stop immediately via - the kill signal (no opportunity to shut down). - This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. - Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. - format: int64 - type: integer - timeoutSeconds: - description: |- - Number of seconds after which the probe times out. - Defaults to 1 second. Minimum value is 1. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - type: object - stdin: - description: |- - Whether this container should allocate a buffer for stdin in the container runtime. If this - is not set, reads from stdin in the container will always result in EOF. - Default is false. - type: boolean - stdinOnce: - description: |- - Whether the container runtime should close the stdin channel after it has been opened by - a single attach. When stdin is true the stdin stream will remain open across multiple attach - sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the - first client attaches to stdin, and then remains open and accepts data until the client disconnects, - at which time stdin is closed and remains closed until the container is restarted. If this - flag is false, a container processes that reads from stdin will never receive an EOF. - Default is false - type: boolean - targetContainerName: - description: |- - If set, the name of the container from PodSpec that this ephemeral container targets. - The ephemeral container will be run in the namespaces (IPC, PID, etc) of this container. - If not set then the ephemeral container uses the namespaces configured in the Pod spec. - - - The container runtime must implement support for this feature. If the runtime does not - support namespace targeting then the result of setting this field is undefined. - type: string - terminationMessagePath: - description: |- - Optional: Path at which the file to which the container's termination message - will be written is mounted into the container's filesystem. - Message written is intended to be brief final status, such as an assertion failure message. - Will be truncated by the node if greater than 4096 bytes. The total message length across - all containers will be limited to 12kb. - Defaults to /dev/termination-log. - Cannot be updated. - type: string - terminationMessagePolicy: - description: |- - Indicate how the termination message should be populated. File will use the contents of - terminationMessagePath to populate the container status message on both success and failure. - FallbackToLogsOnError will use the last chunk of container log output if the termination - message file is empty and the container exited with an error. - The log output is limited to 2048 bytes or 80 lines, whichever is smaller. - Defaults to File. - Cannot be updated. - type: string - tty: - description: |- - Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. - Default is false. - type: boolean - volumeDevices: - description: - volumeDevices is the list of block - devices to be used by the container. - items: - description: - volumeDevice describes a mapping - of a raw block device within a container. + type: array + drop: + description: Removed capabilities + items: + description: Capability represent POSIX + capabilities type + type: string + type: array + type: object + privileged: + description: |- + Run container in privileged mode. + Processes in privileged containers are essentially equivalent to root on the host. + Defaults to false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + procMount: + description: |- + procMount denotes the type of proc mount to use for the containers. + The default is DefaultProcMount which uses the container runtime defaults for + readonly paths and masked paths. + This requires the ProcMountType feature flag to be enabled. + Note that this field cannot be set when spec.os.name is windows. + type: string + readOnlyRootFilesystem: + description: |- + Whether this container has a read-only root filesystem. + Default is false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + runAsGroup: + description: |- + The GID to run the entrypoint of the container process. + Uses runtime default if unset. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + runAsNonRoot: + description: |- + Indicates that the container must run as a non-root user. + If true, the Kubelet will validate the image at runtime to ensure that it + does not run as UID 0 (root) and fail to start the container if it does. + If unset or false, no such validation will be performed. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: boolean + runAsUser: + description: |- + The UID to run the entrypoint of the container process. + Defaults to user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + seLinuxOptions: + description: |- + The SELinux context to be applied to the container. + If unspecified, the container runtime will allocate a random SELinux context for each + container. May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. properties: - devicePath: - description: - devicePath is the path inside - of the container that the device will be - mapped to. + level: + description: Level is SELinux level label + that applies to the container. type: string - name: - description: - name must match the name of a - persistentVolumeClaim in the pod + role: + description: Role is a SELinux role label + that applies to the container. + type: string + type: + description: Type is a SELinux type label + that applies to the container. + type: string + user: + description: User is a SELinux user label + that applies to the container. type: string - required: - - devicePath - - name type: object - type: array - volumeMounts: - description: |- - Pod volumes to mount into the container's filesystem. Subpath mounts are not allowed for ephemeral containers. - Cannot be updated. - items: - description: - VolumeMount describes a mounting - of a Volume within a container. + seccompProfile: + description: |- + The seccomp options to use by this container. If seccomp options are + provided at both the pod & container level, the container options + override the pod options. + Note that this field cannot be set when spec.os.name is windows. properties: - mountPath: + localhostProfile: description: |- - Path within the container at which the volume should be mounted. Must - not contain ':'. + localhostProfile indicates a profile defined in a file on the node should be used. + The profile must be preconfigured on the node to work. + Must be a descending path, relative to the kubelet's configured seccomp profile location. + Must be set if type is "Localhost". Must NOT be set for any other type. type: string - mountPropagation: + type: description: |- - mountPropagation determines how mounts are propagated from the host - to container and the other way around. - When not set, MountPropagationNone is used. - This field is beta in 1.10. + type indicates which kind of seccomp profile will be applied. + Valid options are: + + + Localhost - a profile defined in a file on the node should be used. + RuntimeDefault - the container runtime default profile should be used. + Unconfined - no profile should be applied. type: string - name: - description: - This must match the Name of a - Volume. + required: + - type + type: object + windowsOptions: + description: |- + The Windows specific settings applied to all containers. + If unspecified, the options from the PodSecurityContext will be used. + If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is linux. + properties: + gmsaCredentialSpec: + description: |- + GMSACredentialSpec is where the GMSA admission webhook + (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the + GMSA credential spec named by the GMSACredentialSpecName field. type: string - readOnly: + gmsaCredentialSpecName: + description: GMSACredentialSpecName is the + name of the GMSA credential spec to use. + type: string + hostProcess: description: |- - Mounted read-only if true, read-write otherwise (false or unspecified). - Defaults to false. + HostProcess determines if a container should be run as a 'Host Process' container. + All of a Pod's containers must have the same effective HostProcess value + (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). + In addition, if HostProcess is true then HostNetwork must also be set to true. type: boolean - subPath: + runAsUserName: description: |- - Path within the volume from which the container's volume should be mounted. - Defaults to "" (volume's root). + The UserName in Windows to run the entrypoint of the container process. + Defaults to the user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. type: string - subPathExpr: + type: object + type: object + startupProbe: + description: Probes are not allowed for ephemeral + containers. + properties: + exec: + description: Exec specifies the action to take. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies an action involving + a GRPC port. + properties: + port: + description: Port number of the gRPC service. + Number must be in the range 1 to 65535. + format: int32 + type: integer + service: description: |- - Expanded path within the volume from which the container's volume should be mounted. - Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. - Defaults to "" (volume's root). - SubPathExpr and SubPath are mutually exclusive. + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + + If this is not specified, the default behavior is defined by gRPC. type: string required: - - mountPath - - name + - port type: object - type: array - workingDir: - description: |- - Container's working directory. - If not specified, the container runtime's default will be used, which - might be configured in the container image. - Cannot be updated. - type: string - required: - - name - type: object - type: array - hostAliases: - description: |- - HostAliases is an optional list of hosts and IPs that will be injected into the pod's hosts - file if specified. This is only valid for non-hostNetwork pods. - items: - description: |- - HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the - pod's hosts file. - properties: - hostnames: - description: Hostnames for the above IP address. - items: - type: string - type: array - ip: - description: IP address of the host file entry. - type: string - type: object - type: array - hostIPC: - description: |- - Use the host's ipc namespace. - Optional: Default to false. - type: boolean - hostNetwork: - description: |- - Host networking requested for this pod. Use the host's network namespace. - If this option is set, the ports that will be used must be specified. - Default to false. - type: boolean - hostPID: - description: |- - Use the host's pid namespace. - Optional: Default to false. - type: boolean - hostUsers: - description: |- - Use the host's user namespace. - Optional: Default to true. - If set to true or not present, the pod will be run in the host user namespace, useful - for when the pod needs a feature only available to the host user namespace, such as - loading a kernel module with CAP_SYS_MODULE. - When set to false, a new userns is created for the pod. Setting false is useful for - mitigating container breakout vulnerabilities even allowing users to run their - containers as root without actually having root privileges on the host. - This field is alpha-level and is only honored by servers that enable the UserNamespacesSupport feature. - type: boolean - hostname: - description: |- - Specifies the hostname of the Pod - If not specified, the pod's hostname will be set to a system-defined value. - type: string - imagePullSecrets: - description: |- - ImagePullSecrets is an optional list of references to secrets in the same namespace to use for pulling any of the images used by this PodSpec. - If specified, these secrets will be passed to individual puller implementations for them to use. - More info: https://kubernetes.io/docs/concepts/containers/images#specifying-imagepullsecrets-on-a-pod - items: - description: |- - LocalObjectReference contains enough information to let you locate the - referenced object inside the same namespace. - properties: - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - type: object - x-kubernetes-map-type: atomic - type: array - initContainers: - description: |- - List of initialization containers belonging to the pod. - Init containers are executed in order prior to containers being started. If any - init container fails, the pod is considered to have failed and is handled according - to its restartPolicy. The name for an init container or normal container must be - unique among all containers. - Init containers may not have Lifecycle actions, Readiness probes, Liveness probes, or Startup probes. - The resourceRequirements of an init container are taken into account during scheduling - by finding the highest request/limit for each resource type, and then using the max of - of that value or the sum of the normal containers. Limits are applied to init containers - in a similar fashion. - Init containers cannot currently be added or removed. - Cannot be updated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/ - items: - description: - A single application container that you - want to run within a pod. - properties: - args: - description: |- - Arguments to the entrypoint. - The container image's CMD is used if this is not provided. - Variable references $(VAR_NAME) are expanded using the container's environment. If a variable - cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced - to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will - produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless - of whether the variable exists or not. Cannot be updated. - More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell - items: - type: string - type: array - command: - description: |- - Entrypoint array. Not executed within a shell. - The container image's ENTRYPOINT is used if this is not provided. - Variable references $(VAR_NAME) are expanded using the container's environment. If a variable - cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced - to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will - produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless - of whether the variable exists or not. Cannot be updated. - More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell - items: - type: string - type: array - env: - description: |- - List of environment variables to set in the container. - Cannot be updated. - items: - description: - EnvVar represents an environment - variable present in a Container. + httpGet: + description: HTTPGet specifies the http request + to perform. properties: - name: - description: - Name of the environment variable. - Must be a C_IDENTIFIER. - type: string - value: - description: |- - Variable references $(VAR_NAME) are expanded - using the previously defined environment variables in the container and - any service environment variables. If a variable cannot be resolved, - the reference in the input string will be unchanged. Double $$ are reduced - to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. - "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". - Escaped references will never be expanded, regardless of whether the variable - exists or not. - Defaults to "". - type: string - valueFrom: - description: - Source for the environment variable's - value. Cannot be used if value is not empty. - properties: - configMapKeyRef: - description: Selects a key of a ConfigMap. - properties: - key: - description: The key to select. - type: string - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - Specify whether the ConfigMap - or its key must be defined - type: boolean - required: - - key - type: object - x-kubernetes-map-type: atomic - fieldRef: - description: |- - Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['']`, `metadata.annotations['']`, - spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs. - properties: - apiVersion: - description: - Version of the schema - the FieldPath is written in terms - of, defaults to "v1". - type: string - fieldPath: - description: - Path of the field to - select in the specified API version. - type: string - required: - - fieldPath - type: object - x-kubernetes-map-type: atomic - resourceFieldRef: - description: |- - Selects a resource of the container: only resources limits and requests - (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported. - properties: - containerName: - description: - "Container name: required - for volumes, optional for env vars" - type: string - divisor: - anyOf: - - type: integer - - type: string - description: - Specifies the output - format of the exposed resources, - defaults to "1" - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ - x-kubernetes-int-or-string: true - resource: - description: - "Required: resource to - select" - type: string - required: - - resource - type: object - x-kubernetes-map-type: atomic - secretKeyRef: - description: - Selects a key of a secret - in the pod's namespace - properties: - key: - description: - The key of the secret - to select from. Must be a valid - secret key. - type: string - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - Specify whether the Secret - or its key must be defined - type: boolean - required: - - key - type: object - x-kubernetes-map-type: atomic - type: object + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the + request. HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string required: - - name + - port type: object - type: array - envFrom: - description: |- - List of sources to populate environment variables in the container. - The keys defined within a source must be a C_IDENTIFIER. All invalid keys - will be reported as an event when the container is starting. When a key exists in multiple - sources, the value associated with the last source will take precedence. - Values defined by an Env with a duplicate key will take precedence. - Cannot be updated. - items: - description: - EnvFromSource represents the source - of a set of ConfigMaps + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies an action involving + a TCP port. properties: - configMapRef: - description: The ConfigMap to select from - properties: - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - Specify whether the ConfigMap - must be defined - type: boolean - type: object - x-kubernetes-map-type: atomic - prefix: - description: - An optional identifier to prepend - to each key in the ConfigMap. Must be a - C_IDENTIFIER. - type: string - secretRef: - description: The Secret to select from - properties: - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - Specify whether the Secret - must be defined - type: boolean - type: object - x-kubernetes-map-type: atomic + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port type: object - type: array - image: - description: |- - Container image name. - More info: https://kubernetes.io/docs/concepts/containers/images - This field is optional to allow higher level config management to default or override - container images in workload controllers like Deployments and StatefulSets. + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + stdin: + description: |- + Whether this container should allocate a buffer for stdin in the container runtime. If this + is not set, reads from stdin in the container will always result in EOF. + Default is false. + type: boolean + stdinOnce: + description: |- + Whether the container runtime should close the stdin channel after it has been opened by + a single attach. When stdin is true the stdin stream will remain open across multiple attach + sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the + first client attaches to stdin, and then remains open and accepts data until the client disconnects, + at which time stdin is closed and remains closed until the container is restarted. If this + flag is false, a container processes that reads from stdin will never receive an EOF. + Default is false + type: boolean + targetContainerName: + description: |- + If set, the name of the container from PodSpec that this ephemeral container targets. + The ephemeral container will be run in the namespaces (IPC, PID, etc) of this container. + If not set then the ephemeral container uses the namespaces configured in the Pod spec. + + + The container runtime must implement support for this feature. If the runtime does not + support namespace targeting then the result of setting this field is undefined. + type: string + terminationMessagePath: + description: |- + Optional: Path at which the file to which the container's termination message + will be written is mounted into the container's filesystem. + Message written is intended to be brief final status, such as an assertion failure message. + Will be truncated by the node if greater than 4096 bytes. The total message length across + all containers will be limited to 12kb. + Defaults to /dev/termination-log. + Cannot be updated. + type: string + terminationMessagePolicy: + description: |- + Indicate how the termination message should be populated. File will use the contents of + terminationMessagePath to populate the container status message on both success and failure. + FallbackToLogsOnError will use the last chunk of container log output if the termination + message file is empty and the container exited with an error. + The log output is limited to 2048 bytes or 80 lines, whichever is smaller. + Defaults to File. + Cannot be updated. + type: string + tty: + description: |- + Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. + Default is false. + type: boolean + volumeDevices: + description: volumeDevices is the list of block + devices to be used by the container. + items: + description: volumeDevice describes a mapping + of a raw block device within a container. + properties: + devicePath: + description: devicePath is the path inside + of the container that the device will be + mapped to. + type: string + name: + description: name must match the name of a + persistentVolumeClaim in the pod + type: string + required: + - devicePath + - name + type: object + type: array + volumeMounts: + description: |- + Pod volumes to mount into the container's filesystem. Subpath mounts are not allowed for ephemeral containers. + Cannot be updated. + items: + description: VolumeMount describes a mounting + of a Volume within a container. + properties: + mountPath: + description: |- + Path within the container at which the volume should be mounted. Must + not contain ':'. + type: string + mountPropagation: + description: |- + mountPropagation determines how mounts are propagated from the host + to container and the other way around. + When not set, MountPropagationNone is used. + This field is beta in 1.10. + type: string + name: + description: This must match the Name of a + Volume. + type: string + readOnly: + description: |- + Mounted read-only if true, read-write otherwise (false or unspecified). + Defaults to false. + type: boolean + subPath: + description: |- + Path within the volume from which the container's volume should be mounted. + Defaults to "" (volume's root). + type: string + subPathExpr: + description: |- + Expanded path within the volume from which the container's volume should be mounted. + Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. + Defaults to "" (volume's root). + SubPathExpr and SubPath are mutually exclusive. + type: string + required: + - mountPath + - name + type: object + type: array + workingDir: + description: |- + Container's working directory. + If not specified, the container runtime's default will be used, which + might be configured in the container image. + Cannot be updated. + type: string + required: + - name + type: object + type: array + hostAliases: + description: |- + HostAliases is an optional list of hosts and IPs that will be injected into the pod's hosts + file if specified. This is only valid for non-hostNetwork pods. + items: + description: |- + HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the + pod's hosts file. + properties: + hostnames: + description: Hostnames for the above IP address. + items: type: string - imagePullPolicy: - description: |- - Image pull policy. - One of Always, Never, IfNotPresent. - Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. - Cannot be updated. - More info: https://kubernetes.io/docs/concepts/containers/images#updating-images + type: array + ip: + description: IP address of the host file entry. + type: string + type: object + type: array + hostIPC: + description: |- + Use the host's ipc namespace. + Optional: Default to false. + type: boolean + hostNetwork: + description: |- + Host networking requested for this pod. Use the host's network namespace. + If this option is set, the ports that will be used must be specified. + Default to false. + type: boolean + hostPID: + description: |- + Use the host's pid namespace. + Optional: Default to false. + type: boolean + hostUsers: + description: |- + Use the host's user namespace. + Optional: Default to true. + If set to true or not present, the pod will be run in the host user namespace, useful + for when the pod needs a feature only available to the host user namespace, such as + loading a kernel module with CAP_SYS_MODULE. + When set to false, a new userns is created for the pod. Setting false is useful for + mitigating container breakout vulnerabilities even allowing users to run their + containers as root without actually having root privileges on the host. + This field is alpha-level and is only honored by servers that enable the UserNamespacesSupport feature. + type: boolean + hostname: + description: |- + Specifies the hostname of the Pod + If not specified, the pod's hostname will be set to a system-defined value. + type: string + imagePullSecrets: + description: |- + ImagePullSecrets is an optional list of references to secrets in the same namespace to use for pulling any of the images used by this PodSpec. + If specified, these secrets will be passed to individual puller implementations for them to use. + More info: https://kubernetes.io/docs/concepts/containers/images#specifying-imagepullsecrets-on-a-pod + items: + description: |- + LocalObjectReference contains enough information to let you locate the + referenced object inside the same namespace. + properties: + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + type: object + x-kubernetes-map-type: atomic + type: array + initContainers: + description: |- + List of initialization containers belonging to the pod. + Init containers are executed in order prior to containers being started. If any + init container fails, the pod is considered to have failed and is handled according + to its restartPolicy. The name for an init container or normal container must be + unique among all containers. + Init containers may not have Lifecycle actions, Readiness probes, Liveness probes, or Startup probes. + The resourceRequirements of an init container are taken into account during scheduling + by finding the highest request/limit for each resource type, and then using the max of + of that value or the sum of the normal containers. Limits are applied to init containers + in a similar fashion. + Init containers cannot currently be added or removed. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/ + items: + description: A single application container that you + want to run within a pod. + properties: + args: + description: |- + Arguments to the entrypoint. + The container image's CMD is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: type: string - lifecycle: - description: |- - Actions that the management system should take in response to container lifecycle events. - Cannot be updated. + type: array + command: + description: |- + Entrypoint array. Not executed within a shell. + The container image's ENTRYPOINT is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: + type: string + type: array + env: + description: |- + List of environment variables to set in the container. + Cannot be updated. + items: + description: EnvVar represents an environment + variable present in a Container. properties: - postStart: + name: + description: Name of the environment variable. + Must be a C_IDENTIFIER. + type: string + value: description: |- - PostStart is called immediately after a container is created. If the handler fails, - the container is terminated and restarted according to its restart policy. - Other management of the container blocks until the hook completes. - More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks - properties: - exec: - description: - Exec specifies the action to - take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - httpGet: - description: - HTTPGet specifies the http - request to perform. + Variable references $(VAR_NAME) are expanded + using the previously defined environment variables in the container and + any service environment variables. If a variable cannot be resolved, + the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. + "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". + Escaped references will never be expanded, regardless of whether the variable + exists or not. + Defaults to "". + type: string + valueFrom: + description: Source for the environment variable's + value. Cannot be used if value is not empty. + properties: + configMapKeyRef: + description: Selects a key of a ConfigMap. properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in - the request. HTTP allows repeated - headers. - items: - description: - HTTPHeader describes - a custom header to be used in HTTP - probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: - The header field - value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. + key: + description: The key to select. type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: + name: description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? type: string + optional: + description: Specify whether the ConfigMap + or its key must be defined + type: boolean required: - - port - type: object - sleep: - description: - Sleep represents the duration - that the container should sleep before - being terminated. - properties: - seconds: - description: - Seconds is the number of - seconds to sleep. - format: int64 - type: integer - required: - - seconds + - key type: object - tcpSocket: + x-kubernetes-map-type: atomic + fieldRef: description: |- - Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept - for the backward compatibility. There are no validation of this field and - lifecycle hooks will fail in runtime when tcp handler is specified. + Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['']`, `metadata.annotations['']`, + spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs. properties: - host: - description: - "Optional: Host name to - connect to, defaults to the pod IP." + apiVersion: + description: Version of the schema + the FieldPath is written in terms + of, defaults to "v1". + type: string + fieldPath: + description: Path of the field to + select in the specified API version. type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true required: - - port - type: object - type: object - preStop: - description: |- - PreStop is called immediately before a container is terminated due to an - API request or management event such as liveness/startup probe failure, - preemption, resource contention, etc. The handler is not called if the - container crashes or exits. The Pod's termination grace period countdown begins before the - PreStop hook is executed. Regardless of the outcome of the handler, the - container will eventually terminate within the Pod's termination grace - period (unless delayed by finalizers). Other management of the container blocks until the hook completes - or until the termination grace period is reached. - More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks - properties: - exec: - description: - Exec specifies the action to - take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array + - fieldPath type: object - httpGet: - description: - HTTPGet specifies the http - request to perform. + x-kubernetes-map-type: atomic + resourceFieldRef: + description: |- + Selects a resource of the container: only resources limits and requests + (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported. properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in - the request. HTTP allows repeated - headers. - items: - description: - HTTPHeader describes - a custom header to be used in HTTP - probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: - The header field - value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. + containerName: + description: 'Container name: required + for volumes, optional for env vars' type: string - port: + divisor: anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. + - type: integer + - type: string + description: Specifies the output + format of the exposed resources, + defaults to "1" + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ x-kubernetes-int-or-string: true - scheme: - description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. + resource: + description: 'Required: resource to + select' type: string required: - - port - type: object - sleep: - description: - Sleep represents the duration - that the container should sleep before - being terminated. - properties: - seconds: - description: - Seconds is the number of - seconds to sleep. - format: int64 - type: integer - required: - - seconds + - resource type: object - tcpSocket: - description: |- - Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept - for the backward compatibility. There are no validation of this field and - lifecycle hooks will fail in runtime when tcp handler is specified. + x-kubernetes-map-type: atomic + secretKeyRef: + description: Selects a key of a secret + in the pod's namespace properties: - host: - description: - "Optional: Host name to - connect to, defaults to the pod IP." + key: + description: The key of the secret + to select from. Must be a valid + secret key. type: string - port: - anyOf: - - type: integer - - type: string + name: description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + optional: + description: Specify whether the Secret + or its key must be defined + type: boolean required: - - port + - key type: object + x-kubernetes-map-type: atomic type: object + required: + - name type: object - livenessProbe: - description: |- - Periodic probe of container liveness. - Container will be restarted if the probe fails. - Cannot be updated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + type: array + envFrom: + description: |- + List of sources to populate environment variables in the container. + The keys defined within a source must be a C_IDENTIFIER. All invalid keys + will be reported as an event when the container is starting. When a key exists in multiple + sources, the value associated with the last source will take precedence. + Values defined by an Env with a duplicate key will take precedence. + Cannot be updated. + items: + description: EnvFromSource represents the source + of a set of ConfigMaps properties: - exec: - description: Exec specifies the action to take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - failureThreshold: - description: |- - Minimum consecutive failures for the probe to be considered failed after having succeeded. - Defaults to 3. Minimum value is 1. - format: int32 - type: integer - grpc: - description: - GRPC specifies an action involving - a GRPC port. + configMapRef: + description: The ConfigMap to select from properties: - port: - description: - Port number of the gRPC service. - Number must be in the range 1 to 65535. - format: int32 - type: integer - service: + name: description: |- - Service is the name of the service to place in the gRPC HealthCheckRequest - (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). - - - If this is not specified, the default behavior is defined by gRPC. + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? type: string - required: - - port + optional: + description: Specify whether the ConfigMap + must be defined + type: boolean type: object - httpGet: - description: - HTTPGet specifies the http request - to perform. + x-kubernetes-map-type: atomic + prefix: + description: An optional identifier to prepend + to each key in the ConfigMap. Must be a + C_IDENTIFIER. + type: string + secretRef: + description: The Secret to select from properties: - host: + name: description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in the - request. HTTP allows repeated headers. - items: - description: - HTTPHeader describes a custom - header to be used in HTTP probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: The header field value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: - description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. - type: string - required: - - port + optional: + description: Specify whether the Secret + must be defined + type: boolean type: object - initialDelaySeconds: - description: |- - Number of seconds after the container has started before liveness probes are initiated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - periodSeconds: - description: |- - How often (in seconds) to perform the probe. - Default to 10 seconds. Minimum value is 1. - format: int32 - type: integer - successThreshold: - description: |- - Minimum consecutive successes for the probe to be considered successful after having failed. - Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. - format: int32 - type: integer - tcpSocket: - description: - TCPSocket specifies an action involving - a TCP port. - properties: - host: - description: - "Optional: Host name to connect - to, defaults to the pod IP." - type: string - port: - anyOf: + x-kubernetes-map-type: atomic + type: object + type: array + image: + description: |- + Container image name. + More info: https://kubernetes.io/docs/concepts/containers/images + This field is optional to allow higher level config management to default or override + container images in workload controllers like Deployments and StatefulSets. + type: string + imagePullPolicy: + description: |- + Image pull policy. + One of Always, Never, IfNotPresent. + Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/containers/images#updating-images + type: string + lifecycle: + description: |- + Actions that the management system should take in response to container lifecycle events. + Cannot be updated. + properties: + postStart: + description: |- + PostStart is called immediately after a container is created. If the handler fails, + the container is terminated and restarted according to its restart policy. + Other management of the container blocks until the hook completes. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks + properties: + exec: + description: Exec specifies the action to + take. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + httpGet: + description: HTTPGet specifies the http + request to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in + the request. HTTP allows repeated + headers. + items: + description: HTTPHeader describes + a custom header to be used in HTTP + probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field + value + type: string + required: + - name + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. + type: string + port: + anyOf: - type: integer - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - required: + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: - port - type: object - terminationGracePeriodSeconds: - description: |- - Optional duration in seconds the pod needs to terminate gracefully upon probe failure. - The grace period is the duration in seconds after the processes running in the pod are sent - a termination signal and the time when the processes are forcibly halted with a kill signal. - Set this value longer than the expected cleanup time for your process. - If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this - value overrides the value provided by the pod spec. - Value must be non-negative integer. The value zero indicates stop immediately via - the kill signal (no opportunity to shut down). - This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. - Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. - format: int64 - type: integer - timeoutSeconds: - description: |- - Number of seconds after which the probe times out. - Defaults to 1 second. Minimum value is 1. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - type: object - name: - description: |- - Name of the container specified as a DNS_LABEL. - Each container in a pod must have a unique name (DNS_LABEL). - Cannot be updated. - type: string - ports: - description: |- - List of ports to expose from the container. Not specifying a port here - DOES NOT prevent that port from being exposed. Any port which is - listening on the default "0.0.0.0" address inside a container will be - accessible from the network. - Modifying this array with strategic merge patch may corrupt the data. - For more information See https://github.com/kubernetes/kubernetes/issues/108255. - Cannot be updated. - items: - description: - ContainerPort represents a network - port in a single container. + type: object + sleep: + description: Sleep represents the duration + that the container should sleep before + being terminated. + properties: + seconds: + description: Seconds is the number of + seconds to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for the backward compatibility. There are no validation of this field and + lifecycle hooks will fail in runtime when tcp handler is specified. + properties: + host: + description: 'Optional: Host name to + connect to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + type: object + preStop: + description: |- + PreStop is called immediately before a container is terminated due to an + API request or management event such as liveness/startup probe failure, + preemption, resource contention, etc. The handler is not called if the + container crashes or exits. The Pod's termination grace period countdown begins before the + PreStop hook is executed. Regardless of the outcome of the handler, the + container will eventually terminate within the Pod's termination grace + period (unless delayed by finalizers). Other management of the container blocks until the hook completes + or until the termination grace period is reached. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks properties: - containerPort: + exec: + description: Exec specifies the action to + take. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + httpGet: + description: HTTPGet specifies the http + request to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in + the request. HTTP allows repeated + headers. + items: + description: HTTPHeader describes + a custom header to be used in HTTP + probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field + value + type: string + required: + - name + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + sleep: + description: Sleep represents the duration + that the container should sleep before + being terminated. + properties: + seconds: + description: Seconds is the number of + seconds to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: description: |- - Number of port to expose on the pod's IP address. - This must be a valid port number, 0 < x < 65536. - format: int32 - type: integer - hostIP: - description: - What host IP to bind the external - port to. - type: string - hostPort: + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for the backward compatibility. There are no validation of this field and + lifecycle hooks will fail in runtime when tcp handler is specified. + properties: + host: + description: 'Optional: Host name to + connect to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + type: object + type: object + livenessProbe: + description: |- + Periodic probe of container liveness. + Container will be restarted if the probe fails. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies the action to take. + properties: + command: description: |- - Number of port to expose on the host. - If specified, this must be a valid port number, 0 < x < 65536. - If HostNetwork is specified, this must match ContainerPort. - Most containers do not need this. + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies an action involving + a GRPC port. + properties: + port: + description: Port number of the gRPC service. + Number must be in the range 1 to 65535. format: int32 type: integer - name: + service: + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies the http request + to perform. + properties: + host: description: |- - If specified, this must be an IANA_SVC_NAME and unique within the pod. Each - named port in a pod must have a unique name. Name for the port that can be - referred to by services. + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the + request. HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. type: string - protocol: - default: TCP + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: description: |- - Protocol for port. Must be UDP, TCP, or SCTP. - Defaults to "TCP". + Scheme to use for connecting to the host. + Defaults to HTTP. type: string required: - - containerPort + - port type: object - type: array - x-kubernetes-list-map-keys: - - containerPort - - protocol - x-kubernetes-list-type: map - readinessProbe: - description: |- - Periodic probe of container service readiness. - Container will be removed from service endpoints if the probe fails. - Cannot be updated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies an action involving + a TCP port. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + name: + description: |- + Name of the container specified as a DNS_LABEL. + Each container in a pod must have a unique name (DNS_LABEL). + Cannot be updated. + type: string + ports: + description: |- + List of ports to expose from the container. Not specifying a port here + DOES NOT prevent that port from being exposed. Any port which is + listening on the default "0.0.0.0" address inside a container will be + accessible from the network. + Modifying this array with strategic merge patch may corrupt the data. + For more information See https://github.com/kubernetes/kubernetes/issues/108255. + Cannot be updated. + items: + description: ContainerPort represents a network + port in a single container. properties: - exec: - description: Exec specifies the action to take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - failureThreshold: - description: |- - Minimum consecutive failures for the probe to be considered failed after having succeeded. - Defaults to 3. Minimum value is 1. - format: int32 - type: integer - grpc: - description: - GRPC specifies an action involving - a GRPC port. - properties: - port: - description: - Port number of the gRPC service. - Number must be in the range 1 to 65535. - format: int32 - type: integer - service: - description: |- - Service is the name of the service to place in the gRPC HealthCheckRequest - (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). - - - If this is not specified, the default behavior is defined by gRPC. - type: string - required: - - port - type: object - httpGet: - description: - HTTPGet specifies the http request - to perform. - properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in the - request. HTTP allows repeated headers. - items: - description: - HTTPHeader describes a custom - header to be used in HTTP probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: The header field value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: - description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. - type: string - required: - - port - type: object - initialDelaySeconds: + containerPort: description: |- - Number of seconds after the container has started before liveness probes are initiated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + Number of port to expose on the pod's IP address. + This must be a valid port number, 0 < x < 65536. format: int32 type: integer - periodSeconds: - description: |- - How often (in seconds) to perform the probe. - Default to 10 seconds. Minimum value is 1. - format: int32 - type: integer - successThreshold: + hostIP: + description: What host IP to bind the external + port to. + type: string + hostPort: description: |- - Minimum consecutive successes for the probe to be considered successful after having failed. - Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + Number of port to expose on the host. + If specified, this must be a valid port number, 0 < x < 65536. + If HostNetwork is specified, this must match ContainerPort. + Most containers do not need this. format: int32 type: integer - tcpSocket: - description: - TCPSocket specifies an action involving - a TCP port. - properties: - host: - description: - "Optional: Host name to connect - to, defaults to the pod IP." - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - required: - - port - type: object - terminationGracePeriodSeconds: + name: description: |- - Optional duration in seconds the pod needs to terminate gracefully upon probe failure. - The grace period is the duration in seconds after the processes running in the pod are sent - a termination signal and the time when the processes are forcibly halted with a kill signal. - Set this value longer than the expected cleanup time for your process. - If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this - value overrides the value provided by the pod spec. - Value must be non-negative integer. The value zero indicates stop immediately via - the kill signal (no opportunity to shut down). - This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. - Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. - format: int64 - type: integer - timeoutSeconds: + If specified, this must be an IANA_SVC_NAME and unique within the pod. Each + named port in a pod must have a unique name. Name for the port that can be + referred to by services. + type: string + protocol: + default: TCP description: |- - Number of seconds after which the probe times out. - Defaults to 1 second. Minimum value is 1. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer + Protocol for port. Must be UDP, TCP, or SCTP. + Defaults to "TCP". + type: string + required: + - containerPort type: object - resizePolicy: - description: Resources resize policy for the container. - items: - description: - ContainerResizePolicy represents - resource resize policy for the container. + type: array + x-kubernetes-list-map-keys: + - containerPort + - protocol + x-kubernetes-list-type: map + readinessProbe: + description: |- + Periodic probe of container service readiness. + Container will be removed from service endpoints if the probe fails. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies the action to take. properties: - resourceName: - description: |- - Name of the resource to which this resource resize policy applies. - Supported values: cpu, memory. - type: string - restartPolicy: + command: description: |- - Restart policy to apply when specified resource is resized. - If not specified, it defaults to NotRequired. - type: string - required: - - resourceName - - restartPolicy - type: object - type: array - x-kubernetes-list-type: atomic - resources: - description: |- - Compute Resources required by this container. - Cannot be updated. - More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ - properties: - claims: - description: |- - Claims lists the names of resources, defined in spec.resourceClaims, - that are used by this container. - - - This is an alpha field and requires enabling the - DynamicResourceAllocation feature gate. + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies an action involving + a GRPC port. + properties: + port: + description: Port number of the gRPC service. + Number must be in the range 1 to 65535. + format: int32 + type: integer + service: + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). - This field is immutable. It can only be set for containers. - items: - description: - ResourceClaim references one - entry in PodSpec.ResourceClaims. - properties: - name: - description: |- - Name must match the name of one entry in pod.spec.resourceClaims of - the Pod where this field is used. It makes that resource available - inside a container. - type: string - required: + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies the http request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the + request. HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: - name - type: object - type: array - x-kubernetes-list-map-keys: - - name - x-kubernetes-list-type: map - limits: - additionalProperties: + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. + type: string + port: anyOf: - - type: integer - - type: string - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. x-kubernetes-int-or-string: true - description: |- - Limits describes the maximum amount of compute resources allowed. - More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ - type: object - requests: - additionalProperties: + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies an action involving + a TCP port. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: anyOf: - - type: integer - - type: string - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. x-kubernetes-int-or-string: true - description: |- - Requests describes the minimum amount of compute resources required. - If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, - otherwise to an implementation-defined value. Requests cannot exceed Limits. - More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ - type: object - type: object - restartPolicy: - description: |- - RestartPolicy defines the restart behavior of individual containers in a pod. - This field may only be set for init containers, and the only allowed value is "Always". - For non-init containers or when this field is not specified, - the restart behavior is defined by the Pod's restart policy and the container type. - Setting the RestartPolicy as "Always" for the init container will have the following effect: - this init container will be continually restarted on - exit until all regular containers have terminated. Once all regular - containers have completed, all init containers with restartPolicy "Always" - will be shut down. This lifecycle differs from normal init containers and - is often referred to as a "sidecar" container. Although this init - container still starts in the init container sequence, it does not wait - for the container to complete before proceeding to the next init - container. Instead, the next init container starts immediately after this - init container is started, or after any startupProbe has successfully - completed. - type: string - securityContext: - description: |- - SecurityContext defines the security options the container should be run with. - If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. - More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/ + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + resizePolicy: + description: Resources resize policy for the container. + items: + description: ContainerResizePolicy represents + resource resize policy for the container. properties: - allowPrivilegeEscalation: - description: |- - AllowPrivilegeEscalation controls whether a process can gain more - privileges than its parent process. This bool directly controls if - the no_new_privs flag will be set on the container process. - AllowPrivilegeEscalation is true always when the container is: - 1) run as Privileged - 2) has CAP_SYS_ADMIN - Note that this field cannot be set when spec.os.name is windows. - type: boolean - capabilities: - description: |- - The capabilities to add/drop when running containers. - Defaults to the default set of capabilities granted by the container runtime. - Note that this field cannot be set when spec.os.name is windows. - properties: - add: - description: Added capabilities - items: - description: - Capability represent POSIX - capabilities type - type: string - type: array - drop: - description: Removed capabilities - items: - description: - Capability represent POSIX - capabilities type - type: string - type: array - type: object - privileged: - description: |- - Run container in privileged mode. - Processes in privileged containers are essentially equivalent to root on the host. - Defaults to false. - Note that this field cannot be set when spec.os.name is windows. - type: boolean - procMount: + resourceName: description: |- - procMount denotes the type of proc mount to use for the containers. - The default is DefaultProcMount which uses the container runtime defaults for - readonly paths and masked paths. - This requires the ProcMountType feature flag to be enabled. - Note that this field cannot be set when spec.os.name is windows. + Name of the resource to which this resource resize policy applies. + Supported values: cpu, memory. type: string - readOnlyRootFilesystem: - description: |- - Whether this container has a read-only root filesystem. - Default is false. - Note that this field cannot be set when spec.os.name is windows. - type: boolean - runAsGroup: - description: |- - The GID to run the entrypoint of the container process. - Uses runtime default if unset. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is windows. - format: int64 - type: integer - runAsNonRoot: - description: |- - Indicates that the container must run as a non-root user. - If true, the Kubelet will validate the image at runtime to ensure that it - does not run as UID 0 (root) and fail to start the container if it does. - If unset or false, no such validation will be performed. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - type: boolean - runAsUser: - description: |- - The UID to run the entrypoint of the container process. - Defaults to user specified in image metadata if unspecified. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is windows. - format: int64 - type: integer - seLinuxOptions: - description: |- - The SELinux context to be applied to the container. - If unspecified, the container runtime will allocate a random SELinux context for each - container. May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is windows. - properties: - level: - description: - Level is SELinux level label - that applies to the container. - type: string - role: - description: - Role is a SELinux role label - that applies to the container. - type: string - type: - description: - Type is a SELinux type label - that applies to the container. - type: string - user: - description: - User is a SELinux user label - that applies to the container. - type: string - type: object - seccompProfile: + restartPolicy: description: |- - The seccomp options to use by this container. If seccomp options are - provided at both the pod & container level, the container options - override the pod options. - Note that this field cannot be set when spec.os.name is windows. - properties: - localhostProfile: - description: |- - localhostProfile indicates a profile defined in a file on the node should be used. - The profile must be preconfigured on the node to work. - Must be a descending path, relative to the kubelet's configured seccomp profile location. - Must be set if type is "Localhost". Must NOT be set for any other type. - type: string - type: - description: |- - type indicates which kind of seccomp profile will be applied. - Valid options are: + Restart policy to apply when specified resource is resized. + If not specified, it defaults to NotRequired. + type: string + required: + - resourceName + - restartPolicy + type: object + type: array + x-kubernetes-list-type: atomic + resources: + description: |- + Compute Resources required by this container. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + properties: + claims: + description: |- + Claims lists the names of resources, defined in spec.resourceClaims, + that are used by this container. - Localhost - a profile defined in a file on the node should be used. - RuntimeDefault - the container runtime default profile should be used. - Unconfined - no profile should be applied. - type: string - required: - - type - type: object - windowsOptions: - description: |- - The Windows specific settings applied to all containers. - If unspecified, the options from the PodSecurityContext will be used. - If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is linux. - properties: - gmsaCredentialSpec: - description: |- - GMSACredentialSpec is where the GMSA admission webhook - (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the - GMSA credential spec named by the GMSACredentialSpecName field. - type: string - gmsaCredentialSpecName: - description: - GMSACredentialSpecName is the - name of the GMSA credential spec to use. - type: string - hostProcess: - description: |- - HostProcess determines if a container should be run as a 'Host Process' container. - All of a Pod's containers must have the same effective HostProcess value - (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). - In addition, if HostProcess is true then HostNetwork must also be set to true. - type: boolean - runAsUserName: - description: |- - The UserName in Windows to run the entrypoint of the container process. - Defaults to the user specified in image metadata if unspecified. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - type: string - type: object - type: object - startupProbe: - description: |- - StartupProbe indicates that the Pod has successfully initialized. - If specified, no other probes are executed until this completes successfully. - If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. - This can be used to provide different probe parameters at the beginning of a Pod's lifecycle, - when it might take a long time to load data or warm a cache, than during steady-state operation. - This cannot be updated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - properties: - exec: - description: Exec specifies the action to take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - failureThreshold: - description: |- - Minimum consecutive failures for the probe to be considered failed after having succeeded. - Defaults to 3. Minimum value is 1. - format: int32 - type: integer - grpc: - description: - GRPC specifies an action involving - a GRPC port. - properties: - port: - description: - Port number of the gRPC service. - Number must be in the range 1 to 65535. - format: int32 - type: integer - service: - description: |- - Service is the name of the service to place in the gRPC HealthCheckRequest - (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + This is an alpha field and requires enabling the + DynamicResourceAllocation feature gate. - If this is not specified, the default behavior is defined by gRPC. - type: string - required: - - port - type: object - httpGet: - description: - HTTPGet specifies the http request - to perform. + This field is immutable. It can only be set for containers. + items: + description: ResourceClaim references one + entry in PodSpec.ResourceClaims. properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in the - request. HTTP allows repeated headers. - items: - description: - HTTPHeader describes a custom - header to be used in HTTP probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: The header field value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: + name: description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. + Name must match the name of one entry in pod.spec.resourceClaims of + the Pod where this field is used. It makes that resource available + inside a container. type: string required: - - port + - name type: object - initialDelaySeconds: - description: |- - Number of seconds after the container has started before liveness probes are initiated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - periodSeconds: - description: |- - How often (in seconds) to perform the probe. - Default to 10 seconds. Minimum value is 1. - format: int32 - type: integer - successThreshold: - description: |- - Minimum consecutive successes for the probe to be considered successful after having failed. - Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. - format: int32 - type: integer - tcpSocket: - description: - TCPSocket specifies an action involving - a TCP port. - properties: - host: - description: - "Optional: Host name to connect - to, defaults to the pod IP." + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + limits: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Limits describes the maximum amount of compute resources allowed. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + requests: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Requests describes the minimum amount of compute resources required. + If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, + otherwise to an implementation-defined value. Requests cannot exceed Limits. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + type: object + restartPolicy: + description: |- + RestartPolicy defines the restart behavior of individual containers in a pod. + This field may only be set for init containers, and the only allowed value is "Always". + For non-init containers or when this field is not specified, + the restart behavior is defined by the Pod's restart policy and the container type. + Setting the RestartPolicy as "Always" for the init container will have the following effect: + this init container will be continually restarted on + exit until all regular containers have terminated. Once all regular + containers have completed, all init containers with restartPolicy "Always" + will be shut down. This lifecycle differs from normal init containers and + is often referred to as a "sidecar" container. Although this init + container still starts in the init container sequence, it does not wait + for the container to complete before proceeding to the next init + container. Instead, the next init container starts immediately after this + init container is started, or after any startupProbe has successfully + completed. + type: string + securityContext: + description: |- + SecurityContext defines the security options the container should be run with. + If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. + More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/ + properties: + allowPrivilegeEscalation: + description: |- + AllowPrivilegeEscalation controls whether a process can gain more + privileges than its parent process. This bool directly controls if + the no_new_privs flag will be set on the container process. + AllowPrivilegeEscalation is true always when the container is: + 1) run as Privileged + 2) has CAP_SYS_ADMIN + Note that this field cannot be set when spec.os.name is windows. + type: boolean + capabilities: + description: |- + The capabilities to add/drop when running containers. + Defaults to the default set of capabilities granted by the container runtime. + Note that this field cannot be set when spec.os.name is windows. + properties: + add: + description: Added capabilities + items: + description: Capability represent POSIX + capabilities type type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - required: - - port - type: object - terminationGracePeriodSeconds: - description: |- - Optional duration in seconds the pod needs to terminate gracefully upon probe failure. - The grace period is the duration in seconds after the processes running in the pod are sent - a termination signal and the time when the processes are forcibly halted with a kill signal. - Set this value longer than the expected cleanup time for your process. - If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this - value overrides the value provided by the pod spec. - Value must be non-negative integer. The value zero indicates stop immediately via - the kill signal (no opportunity to shut down). - This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. - Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. - format: int64 - type: integer - timeoutSeconds: - description: |- - Number of seconds after which the probe times out. - Defaults to 1 second. Minimum value is 1. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - type: object - stdin: - description: |- - Whether this container should allocate a buffer for stdin in the container runtime. If this - is not set, reads from stdin in the container will always result in EOF. - Default is false. - type: boolean - stdinOnce: - description: |- - Whether the container runtime should close the stdin channel after it has been opened by - a single attach. When stdin is true the stdin stream will remain open across multiple attach - sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the - first client attaches to stdin, and then remains open and accepts data until the client disconnects, - at which time stdin is closed and remains closed until the container is restarted. If this - flag is false, a container processes that reads from stdin will never receive an EOF. - Default is false - type: boolean - terminationMessagePath: - description: |- - Optional: Path at which the file to which the container's termination message - will be written is mounted into the container's filesystem. - Message written is intended to be brief final status, such as an assertion failure message. - Will be truncated by the node if greater than 4096 bytes. The total message length across - all containers will be limited to 12kb. - Defaults to /dev/termination-log. - Cannot be updated. - type: string - terminationMessagePolicy: - description: |- - Indicate how the termination message should be populated. File will use the contents of - terminationMessagePath to populate the container status message on both success and failure. - FallbackToLogsOnError will use the last chunk of container log output if the termination - message file is empty and the container exited with an error. - The log output is limited to 2048 bytes or 80 lines, whichever is smaller. - Defaults to File. - Cannot be updated. - type: string - tty: - description: |- - Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. - Default is false. - type: boolean - volumeDevices: - description: - volumeDevices is the list of block - devices to be used by the container. - items: - description: - volumeDevice describes a mapping - of a raw block device within a container. + type: array + drop: + description: Removed capabilities + items: + description: Capability represent POSIX + capabilities type + type: string + type: array + type: object + privileged: + description: |- + Run container in privileged mode. + Processes in privileged containers are essentially equivalent to root on the host. + Defaults to false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + procMount: + description: |- + procMount denotes the type of proc mount to use for the containers. + The default is DefaultProcMount which uses the container runtime defaults for + readonly paths and masked paths. + This requires the ProcMountType feature flag to be enabled. + Note that this field cannot be set when spec.os.name is windows. + type: string + readOnlyRootFilesystem: + description: |- + Whether this container has a read-only root filesystem. + Default is false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + runAsGroup: + description: |- + The GID to run the entrypoint of the container process. + Uses runtime default if unset. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + runAsNonRoot: + description: |- + Indicates that the container must run as a non-root user. + If true, the Kubelet will validate the image at runtime to ensure that it + does not run as UID 0 (root) and fail to start the container if it does. + If unset or false, no such validation will be performed. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: boolean + runAsUser: + description: |- + The UID to run the entrypoint of the container process. + Defaults to user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + seLinuxOptions: + description: |- + The SELinux context to be applied to the container. + If unspecified, the container runtime will allocate a random SELinux context for each + container. May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. properties: - devicePath: - description: - devicePath is the path inside - of the container that the device will be - mapped to. + level: + description: Level is SELinux level label + that applies to the container. type: string - name: - description: - name must match the name of a - persistentVolumeClaim in the pod + role: + description: Role is a SELinux role label + that applies to the container. + type: string + type: + description: Type is a SELinux type label + that applies to the container. + type: string + user: + description: User is a SELinux user label + that applies to the container. type: string - required: - - devicePath - - name type: object - type: array - volumeMounts: - description: |- - Pod volumes to mount into the container's filesystem. - Cannot be updated. - items: - description: - VolumeMount describes a mounting - of a Volume within a container. + seccompProfile: + description: |- + The seccomp options to use by this container. If seccomp options are + provided at both the pod & container level, the container options + override the pod options. + Note that this field cannot be set when spec.os.name is windows. properties: - mountPath: + localhostProfile: + description: |- + localhostProfile indicates a profile defined in a file on the node should be used. + The profile must be preconfigured on the node to work. + Must be a descending path, relative to the kubelet's configured seccomp profile location. + Must be set if type is "Localhost". Must NOT be set for any other type. + type: string + type: description: |- - Path within the container at which the volume should be mounted. Must - not contain ':'. + type indicates which kind of seccomp profile will be applied. + Valid options are: + + + Localhost - a profile defined in a file on the node should be used. + RuntimeDefault - the container runtime default profile should be used. + Unconfined - no profile should be applied. type: string - mountPropagation: + required: + - type + type: object + windowsOptions: + description: |- + The Windows specific settings applied to all containers. + If unspecified, the options from the PodSecurityContext will be used. + If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is linux. + properties: + gmsaCredentialSpec: description: |- - mountPropagation determines how mounts are propagated from the host - to container and the other way around. - When not set, MountPropagationNone is used. - This field is beta in 1.10. + GMSACredentialSpec is where the GMSA admission webhook + (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the + GMSA credential spec named by the GMSACredentialSpecName field. type: string - name: - description: - This must match the Name of a - Volume. + gmsaCredentialSpecName: + description: GMSACredentialSpecName is the + name of the GMSA credential spec to use. type: string - readOnly: + hostProcess: description: |- - Mounted read-only if true, read-write otherwise (false or unspecified). - Defaults to false. + HostProcess determines if a container should be run as a 'Host Process' container. + All of a Pod's containers must have the same effective HostProcess value + (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). + In addition, if HostProcess is true then HostNetwork must also be set to true. type: boolean - subPath: + runAsUserName: description: |- - Path within the volume from which the container's volume should be mounted. - Defaults to "" (volume's root). + The UserName in Windows to run the entrypoint of the container process. + Defaults to the user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. type: string - subPathExpr: + type: object + type: object + startupProbe: + description: |- + StartupProbe indicates that the Pod has successfully initialized. + If specified, no other probes are executed until this completes successfully. + If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. + This can be used to provide different probe parameters at the beginning of a Pod's lifecycle, + when it might take a long time to load data or warm a cache, than during steady-state operation. + This cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies the action to take. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies an action involving + a GRPC port. + properties: + port: + description: Port number of the gRPC service. + Number must be in the range 1 to 65535. + format: int32 + type: integer + service: description: |- - Expanded path within the volume from which the container's volume should be mounted. - Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. - Defaults to "" (volume's root). - SubPathExpr and SubPath are mutually exclusive. + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + + If this is not specified, the default behavior is defined by gRPC. type: string required: - - mountPath - - name + - port type: object - type: array - workingDir: - description: |- - Container's working directory. - If not specified, the container runtime's default will be used, which - might be configured in the container image. - Cannot be updated. - type: string - required: - - name - type: object - type: array - nodeName: - description: |- - NodeName is a request to schedule this pod onto a specific node. If it is non-empty, - the scheduler simply schedules this pod onto that node, assuming that it fits resource - requirements. + httpGet: + description: HTTPGet specifies the http request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the + request. HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies an action involving + a TCP port. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + stdin: + description: |- + Whether this container should allocate a buffer for stdin in the container runtime. If this + is not set, reads from stdin in the container will always result in EOF. + Default is false. + type: boolean + stdinOnce: + description: |- + Whether the container runtime should close the stdin channel after it has been opened by + a single attach. When stdin is true the stdin stream will remain open across multiple attach + sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the + first client attaches to stdin, and then remains open and accepts data until the client disconnects, + at which time stdin is closed and remains closed until the container is restarted. If this + flag is false, a container processes that reads from stdin will never receive an EOF. + Default is false + type: boolean + terminationMessagePath: + description: |- + Optional: Path at which the file to which the container's termination message + will be written is mounted into the container's filesystem. + Message written is intended to be brief final status, such as an assertion failure message. + Will be truncated by the node if greater than 4096 bytes. The total message length across + all containers will be limited to 12kb. + Defaults to /dev/termination-log. + Cannot be updated. + type: string + terminationMessagePolicy: + description: |- + Indicate how the termination message should be populated. File will use the contents of + terminationMessagePath to populate the container status message on both success and failure. + FallbackToLogsOnError will use the last chunk of container log output if the termination + message file is empty and the container exited with an error. + The log output is limited to 2048 bytes or 80 lines, whichever is smaller. + Defaults to File. + Cannot be updated. + type: string + tty: + description: |- + Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. + Default is false. + type: boolean + volumeDevices: + description: volumeDevices is the list of block + devices to be used by the container. + items: + description: volumeDevice describes a mapping + of a raw block device within a container. + properties: + devicePath: + description: devicePath is the path inside + of the container that the device will be + mapped to. + type: string + name: + description: name must match the name of a + persistentVolumeClaim in the pod + type: string + required: + - devicePath + - name + type: object + type: array + volumeMounts: + description: |- + Pod volumes to mount into the container's filesystem. + Cannot be updated. + items: + description: VolumeMount describes a mounting + of a Volume within a container. + properties: + mountPath: + description: |- + Path within the container at which the volume should be mounted. Must + not contain ':'. + type: string + mountPropagation: + description: |- + mountPropagation determines how mounts are propagated from the host + to container and the other way around. + When not set, MountPropagationNone is used. + This field is beta in 1.10. + type: string + name: + description: This must match the Name of a + Volume. + type: string + readOnly: + description: |- + Mounted read-only if true, read-write otherwise (false or unspecified). + Defaults to false. + type: boolean + subPath: + description: |- + Path within the volume from which the container's volume should be mounted. + Defaults to "" (volume's root). + type: string + subPathExpr: + description: |- + Expanded path within the volume from which the container's volume should be mounted. + Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. + Defaults to "" (volume's root). + SubPathExpr and SubPath are mutually exclusive. + type: string + required: + - mountPath + - name + type: object + type: array + workingDir: + description: |- + Container's working directory. + If not specified, the container runtime's default will be used, which + might be configured in the container image. + Cannot be updated. + type: string + required: + - name + type: object + type: array + nodeName: + description: |- + NodeName is a request to schedule this pod onto a specific node. If it is non-empty, + the scheduler simply schedules this pod onto that node, assuming that it fits resource + requirements. + type: string + nodeSelector: + additionalProperties: type: string - nodeSelector: - additionalProperties: + description: |- + NodeSelector is a selector which must be true for the pod to fit on a node. + Selector which must match a node's labels for the pod to be scheduled on that node. + More info: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/ + type: object + x-kubernetes-map-type: atomic + os: + description: |- + Specifies the OS of the containers in the pod. + Some pod and container fields are restricted if this is set. + + + If the OS field is set to linux, the following fields must be unset: + -securityContext.windowsOptions + + + If the OS field is set to windows, following fields must be unset: + - spec.hostPID + - spec.hostIPC + - spec.hostUsers + - spec.securityContext.seLinuxOptions + - spec.securityContext.seccompProfile + - spec.securityContext.fsGroup + - spec.securityContext.fsGroupChangePolicy + - spec.securityContext.sysctls + - spec.shareProcessNamespace + - spec.securityContext.runAsUser + - spec.securityContext.runAsGroup + - spec.securityContext.supplementalGroups + - spec.containers[*].securityContext.seLinuxOptions + - spec.containers[*].securityContext.seccompProfile + - spec.containers[*].securityContext.capabilities + - spec.containers[*].securityContext.readOnlyRootFilesystem + - spec.containers[*].securityContext.privileged + - spec.containers[*].securityContext.allowPrivilegeEscalation + - spec.containers[*].securityContext.procMount + - spec.containers[*].securityContext.runAsUser + - spec.containers[*].securityContext.runAsGroup + properties: + name: + description: |- + Name is the name of the operating system. The currently supported values are linux and windows. + Additional value may be defined in future and can be one of: + https://github.com/opencontainers/runtime-spec/blob/master/config.md#platform-specific-configuration + Clients should expect to handle additional values and treat unrecognized values in this field as os: null type: string - description: |- - NodeSelector is a selector which must be true for the pod to fit on a node. - Selector which must match a node's labels for the pod to be scheduled on that node. - More info: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/ + required: + - name + type: object + overhead: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Overhead represents the resource overhead associated with running a pod for a given RuntimeClass. + This field will be autopopulated at admission time by the RuntimeClass admission controller. If + the RuntimeClass admission controller is enabled, overhead must not be set in Pod create requests. + The RuntimeClass admission controller will reject Pod create requests which have the overhead already + set. If RuntimeClass is configured and selected in the PodSpec, Overhead will be set to the value + defined in the corresponding RuntimeClass, otherwise it will remain unset and treated as zero. + More info: https://git.k8s.io/enhancements/keps/sig-node/688-pod-overhead/README.md + type: object + preemptionPolicy: + description: |- + PreemptionPolicy is the Policy for preempting pods with lower priority. + One of Never, PreemptLowerPriority. + Defaults to PreemptLowerPriority if unset. + type: string + priority: + description: |- + The priority value. Various system components use this field to find the + priority of the pod. When Priority Admission Controller is enabled, it + prevents users from setting this field. The admission controller populates + this field from PriorityClassName. + The higher the value, the higher the priority. + format: int32 + type: integer + priorityClassName: + description: |- + If specified, indicates the pod's priority. "system-node-critical" and + "system-cluster-critical" are two special keywords which indicate the + highest priorities with the former being the highest priority. Any other + name must be defined by creating a PriorityClass object with that name. + If not specified, the pod priority will be default or zero if there is no + default. + type: string + readinessGates: + description: |- + If specified, all readiness gates will be evaluated for pod readiness. + A pod is ready when all its containers are ready AND + all conditions specified in the readiness gates have status equal to "True" + More info: https://git.k8s.io/enhancements/keps/sig-network/580-pod-readiness-gates + items: + description: PodReadinessGate contains the reference + to a pod condition + properties: + conditionType: + description: ConditionType refers to a condition + in the pod's condition list with matching type. + type: string + required: + - conditionType type: object - x-kubernetes-map-type: atomic - os: + type: array + resourceClaims: + description: |- + ResourceClaims defines which ResourceClaims must be allocated + and reserved before the Pod is allowed to start. The resources + will be made available to those containers which consume them + by name. + + + This is an alpha field and requires enabling the + DynamicResourceAllocation feature gate. + + + This field is immutable. + items: description: |- - Specifies the OS of the containers in the pod. - Some pod and container fields are restricted if this is set. - - - If the OS field is set to linux, the following fields must be unset: - -securityContext.windowsOptions - - - If the OS field is set to windows, following fields must be unset: - - spec.hostPID - - spec.hostIPC - - spec.hostUsers - - spec.securityContext.seLinuxOptions - - spec.securityContext.seccompProfile - - spec.securityContext.fsGroup - - spec.securityContext.fsGroupChangePolicy - - spec.securityContext.sysctls - - spec.shareProcessNamespace - - spec.securityContext.runAsUser - - spec.securityContext.runAsGroup - - spec.securityContext.supplementalGroups - - spec.containers[*].securityContext.seLinuxOptions - - spec.containers[*].securityContext.seccompProfile - - spec.containers[*].securityContext.capabilities - - spec.containers[*].securityContext.readOnlyRootFilesystem - - spec.containers[*].securityContext.privileged - - spec.containers[*].securityContext.allowPrivilegeEscalation - - spec.containers[*].securityContext.procMount - - spec.containers[*].securityContext.runAsUser - - spec.containers[*].securityContext.runAsGroup + PodResourceClaim references exactly one ResourceClaim through a ClaimSource. + It adds a name to it that uniquely identifies the ResourceClaim inside the Pod. + Containers that need access to the ResourceClaim reference it with this name. properties: name: description: |- - Name is the name of the operating system. The currently supported values are linux and windows. - Additional value may be defined in future and can be one of: - https://github.com/opencontainers/runtime-spec/blob/master/config.md#platform-specific-configuration - Clients should expect to handle additional values and treat unrecognized values in this field as os: null + Name uniquely identifies this resource claim inside the pod. + This must be a DNS_LABEL. type: string + source: + description: Source describes where to find the + ResourceClaim. + properties: + resourceClaimName: + description: |- + ResourceClaimName is the name of a ResourceClaim object in the same + namespace as this pod. + type: string + resourceClaimTemplateName: + description: |- + ResourceClaimTemplateName is the name of a ResourceClaimTemplate + object in the same namespace as this pod. + + + The template will be used to create a new ResourceClaim, which will + be bound to this pod. When this pod is deleted, the ResourceClaim + will also be deleted. The pod name and resource name, along with a + generated component, will be used to form a unique name for the + ResourceClaim, which will be recorded in pod.status.resourceClaimStatuses. + + + This field is immutable and no changes will be made to the + corresponding ResourceClaim by the control plane after creating the + ResourceClaim. + type: string + type: object required: - - name + - name type: object - overhead: - additionalProperties: - anyOf: - - type: integer - - type: string - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ - x-kubernetes-int-or-string: true - description: |- - Overhead represents the resource overhead associated with running a pod for a given RuntimeClass. - This field will be autopopulated at admission time by the RuntimeClass admission controller. If - the RuntimeClass admission controller is enabled, overhead must not be set in Pod create requests. - The RuntimeClass admission controller will reject Pod create requests which have the overhead already - set. If RuntimeClass is configured and selected in the PodSpec, Overhead will be set to the value - defined in the corresponding RuntimeClass, otherwise it will remain unset and treated as zero. - More info: https://git.k8s.io/enhancements/keps/sig-node/688-pod-overhead/README.md + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + restartPolicy: + description: |- + Restart policy for all containers within the pod. + One of Always, OnFailure, Never. In some contexts, only a subset of those values may be permitted. + Default to Always. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#restart-policy + type: string + runtimeClassName: + description: |- + RuntimeClassName refers to a RuntimeClass object in the node.k8s.io group, which should be used + to run this pod. If no RuntimeClass resource matches the named class, the pod will not be run. + If unset or empty, the "legacy" RuntimeClass will be used, which is an implicit class with an + empty definition that uses the default runtime handler. + More info: https://git.k8s.io/enhancements/keps/sig-node/585-runtime-class + type: string + schedulerName: + description: |- + If specified, the pod will be dispatched by specified scheduler. + If not specified, the pod will be dispatched by default scheduler. + type: string + schedulingGates: + description: |- + SchedulingGates is an opaque list of values that if specified will block scheduling the pod. + If schedulingGates is not empty, the pod will stay in the SchedulingGated state and the + scheduler will not attempt to schedule the pod. + + + SchedulingGates can only be set at pod creation time, and be removed only afterwards. + + + This is a beta feature enabled by the PodSchedulingReadiness feature gate. + items: + description: PodSchedulingGate is associated to a Pod + to guard its scheduling. + properties: + name: + description: |- + Name of the scheduling gate. + Each scheduling gate must have a unique name field. + type: string + required: + - name type: object - preemptionPolicy: - description: |- - PreemptionPolicy is the Policy for preempting pods with lower priority. - One of Never, PreemptLowerPriority. - Defaults to PreemptLowerPriority if unset. - type: string - priority: - description: |- - The priority value. Various system components use this field to find the - priority of the pod. When Priority Admission Controller is enabled, it - prevents users from setting this field. The admission controller populates - this field from PriorityClassName. - The higher the value, the higher the priority. - format: int32 - type: integer - priorityClassName: - description: |- - If specified, indicates the pod's priority. "system-node-critical" and - "system-cluster-critical" are two special keywords which indicate the - highest priorities with the former being the highest priority. Any other - name must be defined by creating a PriorityClass object with that name. - If not specified, the pod priority will be default or zero if there is no - default. - type: string - readinessGates: - description: |- - If specified, all readiness gates will be evaluated for pod readiness. - A pod is ready when all its containers are ready AND - all conditions specified in the readiness gates have status equal to "True" - More info: https://git.k8s.io/enhancements/keps/sig-network/580-pod-readiness-gates - items: - description: - PodReadinessGate contains the reference - to a pod condition - properties: - conditionType: - description: - ConditionType refers to a condition - in the pod's condition list with matching type. - type: string - required: - - conditionType - type: object - type: array - resourceClaims: - description: |- - ResourceClaims defines which ResourceClaims must be allocated - and reserved before the Pod is allowed to start. The resources - will be made available to those containers which consume them - by name. + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + securityContext: + description: |- + SecurityContext holds pod-level security attributes and common container settings. + Optional: Defaults to empty. See type description for default values of each field. + properties: + fsGroup: + description: |- + A special supplemental group that applies to all containers in a pod. + Some volume types allow the Kubelet to change the ownership of that volume + to be owned by the pod: - This is an alpha field and requires enabling the - DynamicResourceAllocation feature gate. + 1. The owning GID will be the FSGroup + 2. The setgid bit is set (new files created in the volume will be owned by FSGroup) + 3. The permission bits are OR'd with rw-rw---- - This field is immutable. - items: + If unset, the Kubelet will not modify the ownership and permissions of any volume. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + fsGroupChangePolicy: + description: |- + fsGroupChangePolicy defines behavior of changing ownership and permission of the volume + before being exposed inside Pod. This field will only apply to + volume types which support fsGroup based ownership(and permissions). + It will have no effect on ephemeral volume types such as: secret, configmaps + and emptydir. + Valid values are "OnRootMismatch" and "Always". If not specified, "Always" is used. + Note that this field cannot be set when spec.os.name is windows. + type: string + runAsGroup: description: |- - PodResourceClaim references exactly one ResourceClaim through a ClaimSource. - It adds a name to it that uniquely identifies the ResourceClaim inside the Pod. - Containers that need access to the ResourceClaim reference it with this name. + The GID to run the entrypoint of the container process. + Uses runtime default if unset. + May also be set in SecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence + for that container. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + runAsNonRoot: + description: |- + Indicates that the container must run as a non-root user. + If true, the Kubelet will validate the image at runtime to ensure that it + does not run as UID 0 (root) and fail to start the container if it does. + If unset or false, no such validation will be performed. + May also be set in SecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: boolean + runAsUser: + description: |- + The UID to run the entrypoint of the container process. + Defaults to user specified in image metadata if unspecified. + May also be set in SecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence + for that container. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + seLinuxOptions: + description: |- + The SELinux context to be applied to all containers. + If unspecified, the container runtime will allocate a random SELinux context for each + container. May also be set in SecurityContext. If set in + both SecurityContext and PodSecurityContext, the value specified in SecurityContext + takes precedence for that container. + Note that this field cannot be set when spec.os.name is windows. + properties: + level: + description: Level is SELinux level label that + applies to the container. + type: string + role: + description: Role is a SELinux role label that + applies to the container. + type: string + type: + description: Type is a SELinux type label that + applies to the container. + type: string + user: + description: User is a SELinux user label that + applies to the container. + type: string + type: object + seccompProfile: + description: |- + The seccomp options to use by the containers in this pod. + Note that this field cannot be set when spec.os.name is windows. properties: - name: + localhostProfile: description: |- - Name uniquely identifies this resource claim inside the pod. - This must be a DNS_LABEL. + localhostProfile indicates a profile defined in a file on the node should be used. + The profile must be preconfigured on the node to work. + Must be a descending path, relative to the kubelet's configured seccomp profile location. + Must be set if type is "Localhost". Must NOT be set for any other type. type: string - source: - description: - Source describes where to find the - ResourceClaim. - properties: - resourceClaimName: - description: |- - ResourceClaimName is the name of a ResourceClaim object in the same - namespace as this pod. - type: string - resourceClaimTemplateName: - description: |- - ResourceClaimTemplateName is the name of a ResourceClaimTemplate - object in the same namespace as this pod. - - - The template will be used to create a new ResourceClaim, which will - be bound to this pod. When this pod is deleted, the ResourceClaim - will also be deleted. The pod name and resource name, along with a - generated component, will be used to form a unique name for the - ResourceClaim, which will be recorded in pod.status.resourceClaimStatuses. + type: + description: |- + type indicates which kind of seccomp profile will be applied. + Valid options are: - This field is immutable and no changes will be made to the - corresponding ResourceClaim by the control plane after creating the - ResourceClaim. - type: string - type: object + Localhost - a profile defined in a file on the node should be used. + RuntimeDefault - the container runtime default profile should be used. + Unconfined - no profile should be applied. + type: string required: - - name + - type type: object - type: array - x-kubernetes-list-map-keys: - - name - x-kubernetes-list-type: map - restartPolicy: - description: |- - Restart policy for all containers within the pod. - One of Always, OnFailure, Never. In some contexts, only a subset of those values may be permitted. - Default to Always. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#restart-policy - type: string - runtimeClassName: - description: |- - RuntimeClassName refers to a RuntimeClass object in the node.k8s.io group, which should be used - to run this pod. If no RuntimeClass resource matches the named class, the pod will not be run. - If unset or empty, the "legacy" RuntimeClass will be used, which is an implicit class with an - empty definition that uses the default runtime handler. - More info: https://git.k8s.io/enhancements/keps/sig-node/585-runtime-class - type: string - schedulerName: - description: |- - If specified, the pod will be dispatched by specified scheduler. - If not specified, the pod will be dispatched by default scheduler. - type: string - schedulingGates: - description: |- - SchedulingGates is an opaque list of values that if specified will block scheduling the pod. - If schedulingGates is not empty, the pod will stay in the SchedulingGated state and the - scheduler will not attempt to schedule the pod. - - - SchedulingGates can only be set at pod creation time, and be removed only afterwards. - - - This is a beta feature enabled by the PodSchedulingReadiness feature gate. - items: - description: - PodSchedulingGate is associated to a Pod - to guard its scheduling. + supplementalGroups: + description: |- + A list of groups applied to the first process run in each container, in addition + to the container's primary GID, the fsGroup (if specified), and group memberships + defined in the container image for the uid of the container process. If unspecified, + no additional groups are added to any container. Note that group memberships + defined in the container image for the uid of the container process are still effective, + even if they are not included in this list. + Note that this field cannot be set when spec.os.name is windows. + items: + format: int64 + type: integer + type: array + sysctls: + description: |- + Sysctls hold a list of namespaced sysctls used for the pod. Pods with unsupported + sysctls (by the container runtime) might fail to launch. + Note that this field cannot be set when spec.os.name is windows. + items: + description: Sysctl defines a kernel parameter to + be set + properties: + name: + description: Name of a property to set + type: string + value: + description: Value of a property to set + type: string + required: + - name + - value + type: object + type: array + windowsOptions: + description: |- + The Windows specific settings applied to all containers. + If unspecified, the options within a container's SecurityContext will be used. + If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is linux. properties: - name: + gmsaCredentialSpec: description: |- - Name of the scheduling gate. - Each scheduling gate must have a unique name field. + GMSACredentialSpec is where the GMSA admission webhook + (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the + GMSA credential spec named by the GMSACredentialSpecName field. + type: string + gmsaCredentialSpecName: + description: GMSACredentialSpecName is the name + of the GMSA credential spec to use. + type: string + hostProcess: + description: |- + HostProcess determines if a container should be run as a 'Host Process' container. + All of a Pod's containers must have the same effective HostProcess value + (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). + In addition, if HostProcess is true then HostNetwork must also be set to true. + type: boolean + runAsUserName: + description: |- + The UserName in Windows to run the entrypoint of the container process. + Defaults to the user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. type: string - required: - - name type: object - type: array - x-kubernetes-list-map-keys: - - name - x-kubernetes-list-type: map - securityContext: + type: object + serviceAccount: + description: |- + DeprecatedServiceAccount is a depreciated alias for ServiceAccountName. + Deprecated: Use serviceAccountName instead. + type: string + serviceAccountName: + description: |- + ServiceAccountName is the name of the ServiceAccount to use to run this pod. + More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/ + type: string + setHostnameAsFQDN: + description: |- + If true the pod's hostname will be configured as the pod's FQDN, rather than the leaf name (the default). + In Linux containers, this means setting the FQDN in the hostname field of the kernel (the nodename field of struct utsname). + In Windows containers, this means setting the registry value of hostname for the registry key HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters to FQDN. + If a pod does not have FQDN, this has no effect. + Default to false. + type: boolean + shareProcessNamespace: + description: |- + Share a single process namespace between all of the containers in a pod. + When this is set containers will be able to view and signal processes from other containers + in the same pod, and the first process in each container will not be assigned PID 1. + HostPID and ShareProcessNamespace cannot both be set. + Optional: Default to false. + type: boolean + subdomain: + description: |- + If specified, the fully qualified Pod hostname will be "...svc.". + If not specified, the pod will not have a domainname at all. + type: string + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully. May be decreased in delete request. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + If this value is nil, the default grace period will be used instead. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + Defaults to 30 seconds. + format: int64 + type: integer + tolerations: + description: If specified, the pod's tolerations. + items: description: |- - SecurityContext holds pod-level security attributes and common container settings. - Optional: Defaults to empty. See type description for default values of each field. + The pod this Toleration is attached to tolerates any taint that matches + the triple using the matching operator . properties: - fsGroup: + effect: description: |- - A special supplemental group that applies to all containers in a pod. - Some volume types allow the Kubelet to change the ownership of that volume - to be owned by the pod: - - - 1. The owning GID will be the FSGroup - 2. The setgid bit is set (new files created in the volume will be owned by FSGroup) - 3. The permission bits are OR'd with rw-rw---- - - - If unset, the Kubelet will not modify the ownership and permissions of any volume. - Note that this field cannot be set when spec.os.name is windows. - format: int64 - type: integer - fsGroupChangePolicy: - description: |- - fsGroupChangePolicy defines behavior of changing ownership and permission of the volume - before being exposed inside Pod. This field will only apply to - volume types which support fsGroup based ownership(and permissions). - It will have no effect on ephemeral volume types such as: secret, configmaps - and emptydir. - Valid values are "OnRootMismatch" and "Always". If not specified, "Always" is used. - Note that this field cannot be set when spec.os.name is windows. + Effect indicates the taint effect to match. Empty means match all taint effects. + When specified, allowed values are NoSchedule, PreferNoSchedule and NoExecute. type: string - runAsGroup: - description: |- - The GID to run the entrypoint of the container process. - Uses runtime default if unset. - May also be set in SecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence - for that container. - Note that this field cannot be set when spec.os.name is windows. - format: int64 - type: integer - runAsNonRoot: - description: |- - Indicates that the container must run as a non-root user. - If true, the Kubelet will validate the image at runtime to ensure that it - does not run as UID 0 (root) and fail to start the container if it does. - If unset or false, no such validation will be performed. - May also be set in SecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - type: boolean - runAsUser: - description: |- - The UID to run the entrypoint of the container process. - Defaults to user specified in image metadata if unspecified. - May also be set in SecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence - for that container. - Note that this field cannot be set when spec.os.name is windows. + key: + description: |- + Key is the taint key that the toleration applies to. Empty means match all taint keys. + If the key is empty, operator must be Exists; this combination means to match all values and all keys. + type: string + operator: + description: |- + Operator represents a key's relationship to the value. + Valid operators are Exists and Equal. Defaults to Equal. + Exists is equivalent to wildcard for value, so that a pod can + tolerate all taints of a particular category. + type: string + tolerationSeconds: + description: |- + TolerationSeconds represents the period of time the toleration (which must be + of effect NoExecute, otherwise this field is ignored) tolerates the taint. By default, + it is not set, which means tolerate the taint forever (do not evict). Zero and + negative values will be treated as 0 (evict immediately) by the system. format: int64 type: integer - seLinuxOptions: - description: |- - The SELinux context to be applied to all containers. - If unspecified, the container runtime will allocate a random SELinux context for each - container. May also be set in SecurityContext. If set in - both SecurityContext and PodSecurityContext, the value specified in SecurityContext - takes precedence for that container. - Note that this field cannot be set when spec.os.name is windows. - properties: - level: - description: - Level is SELinux level label that - applies to the container. - type: string - role: - description: - Role is a SELinux role label that - applies to the container. - type: string - type: - description: - Type is a SELinux type label that - applies to the container. - type: string - user: - description: - User is a SELinux user label that - applies to the container. - type: string - type: object - seccompProfile: + value: description: |- - The seccomp options to use by the containers in this pod. - Note that this field cannot be set when spec.os.name is windows. + Value is the taint value the toleration matches to. + If the operator is Exists, the value should be empty, otherwise just a regular string. + type: string + type: object + type: array + topologySpreadConstraints: + description: |- + TopologySpreadConstraints describes how a group of pods ought to spread across topology + domains. Scheduler will schedule pods in a way which abides by the constraints. + All topologySpreadConstraints are ANDed. + items: + description: TopologySpreadConstraint specifies how + to spread matching pods among the given topology. + properties: + labelSelector: + description: |- + LabelSelector is used to find matching pods. + Pods that match this label selector are counted to determine the number of pods + in their corresponding topology domain. properties: - localhostProfile: - description: |- - localhostProfile indicates a profile defined in a file on the node should be used. - The profile must be preconfigured on the node to work. - Must be a descending path, relative to the kubelet's configured seccomp profile location. - Must be set if type is "Localhost". Must NOT be set for any other type. - type: string - type: + matchExpressions: + description: matchExpressions is a list of label + selector requirements. The requirements are + ANDed. + items: + description: |- + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. + properties: + key: + description: key is the label key that + the selector applies to. + type: string + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. + items: + type: string + type: array + required: + - key + - operator + type: object + type: array + matchLabels: + additionalProperties: + type: string description: |- - type indicates which kind of seccomp profile will be applied. - Valid options are: + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. + type: object + type: object + x-kubernetes-map-type: atomic + matchLabelKeys: + description: |- + MatchLabelKeys is a set of pod label keys to select the pods over which + spreading will be calculated. The keys are used to lookup values from the + incoming pod labels, those key-value labels are ANDed with labelSelector + to select the group of existing pods over which spreading will be calculated + for the incoming pod. The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. + MatchLabelKeys cannot be set when LabelSelector isn't set. + Keys that don't exist in the incoming pod labels will + be ignored. A null or empty list means only match against labelSelector. - Localhost - a profile defined in a file on the node should be used. - RuntimeDefault - the container runtime default profile should be used. - Unconfined - no profile should be applied. - type: string - required: - - type - type: object - supplementalGroups: - description: |- - A list of groups applied to the first process run in each container, in addition - to the container's primary GID, the fsGroup (if specified), and group memberships - defined in the container image for the uid of the container process. If unspecified, - no additional groups are added to any container. Note that group memberships - defined in the container image for the uid of the container process are still effective, - even if they are not included in this list. - Note that this field cannot be set when spec.os.name is windows. + This is a beta field and requires the MatchLabelKeysInPodTopologySpread feature gate to be enabled (enabled by default). items: - format: int64 - type: integer + type: string type: array - sysctls: + x-kubernetes-list-type: atomic + maxSkew: description: |- - Sysctls hold a list of namespaced sysctls used for the pod. Pods with unsupported - sysctls (by the container runtime) might fail to launch. - Note that this field cannot be set when spec.os.name is windows. - items: - description: - Sysctl defines a kernel parameter to - be set - properties: - name: - description: Name of a property to set - type: string - value: - description: Value of a property to set - type: string - required: - - name - - value - type: object - type: array - windowsOptions: + MaxSkew describes the degree to which pods may be unevenly distributed. + When `whenUnsatisfiable=DoNotSchedule`, it is the maximum permitted difference + between the number of matching pods in the target topology and the global minimum. + The global minimum is the minimum number of matching pods in an eligible domain + or zero if the number of eligible domains is less than MinDomains. + For example, in a 3-zone cluster, MaxSkew is set to 1, and pods with the same + labelSelector spread as 2/2/1: + In this case, the global minimum is 1. + | zone1 | zone2 | zone3 | + | P P | P P | P | + - if MaxSkew is 1, incoming pod can only be scheduled to zone3 to become 2/2/2; + scheduling it onto zone1(zone2) would make the ActualSkew(3-1) on zone1(zone2) + violate MaxSkew(1). + - if MaxSkew is 2, incoming pod can be scheduled onto any zone. + When `whenUnsatisfiable=ScheduleAnyway`, it is used to give higher precedence + to topologies that satisfy it. + It's a required field. Default value is 1 and 0 is not allowed. + format: int32 + type: integer + minDomains: description: |- - The Windows specific settings applied to all containers. - If unspecified, the options within a container's SecurityContext will be used. - If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is linux. - properties: - gmsaCredentialSpec: + MinDomains indicates a minimum number of eligible domains. + When the number of eligible domains with matching topology keys is less than minDomains, + Pod Topology Spread treats "global minimum" as 0, and then the calculation of Skew is performed. + And when the number of eligible domains with matching topology keys equals or greater than minDomains, + this value has no effect on scheduling. + As a result, when the number of eligible domains is less than minDomains, + scheduler won't schedule more than maxSkew Pods to those domains. + If value is nil, the constraint behaves as if MinDomains is equal to 1. + Valid values are integers greater than 0. + When value is not nil, WhenUnsatisfiable must be DoNotSchedule. + + + For example, in a 3-zone cluster, MaxSkew is set to 2, MinDomains is set to 5 and pods with the same + labelSelector spread as 2/2/2: + | zone1 | zone2 | zone3 | + | P P | P P | P P | + The number of domains is less than 5(MinDomains), so "global minimum" is treated as 0. + In this situation, new pod with the same labelSelector cannot be scheduled, + because computed skew will be 3(3 - 0) if new Pod is scheduled to any of the three zones, + it will violate MaxSkew. + + + This is a beta field and requires the MinDomainsInPodTopologySpread feature gate to be enabled (enabled by default). + format: int32 + type: integer + nodeAffinityPolicy: + description: |- + NodeAffinityPolicy indicates how we will treat Pod's nodeAffinity/nodeSelector + when calculating pod topology spread skew. Options are: + - Honor: only nodes matching nodeAffinity/nodeSelector are included in the calculations. + - Ignore: nodeAffinity/nodeSelector are ignored. All nodes are included in the calculations. + + + If this value is nil, the behavior is equivalent to the Honor policy. + This is a beta-level feature default enabled by the NodeInclusionPolicyInPodTopologySpread feature flag. + type: string + nodeTaintsPolicy: + description: |- + NodeTaintsPolicy indicates how we will treat node taints when calculating + pod topology spread skew. Options are: + - Honor: nodes without taints, along with tainted nodes for which the incoming pod + has a toleration, are included. + - Ignore: node taints are ignored. All nodes are included. + + + If this value is nil, the behavior is equivalent to the Ignore policy. + This is a beta-level feature default enabled by the NodeInclusionPolicyInPodTopologySpread feature flag. + type: string + topologyKey: + description: |- + TopologyKey is the key of node labels. Nodes that have a label with this key + and identical values are considered to be in the same topology. + We consider each as a "bucket", and try to put balanced number + of pods into each bucket. + We define a domain as a particular instance of a topology. + Also, we define an eligible domain as a domain whose nodes meet the requirements of + nodeAffinityPolicy and nodeTaintsPolicy. + e.g. If TopologyKey is "kubernetes.io/hostname", each Node is a domain of that topology. + And, if TopologyKey is "topology.kubernetes.io/zone", each zone is a domain of that topology. + It's a required field. + type: string + whenUnsatisfiable: + description: |- + WhenUnsatisfiable indicates how to deal with a pod if it doesn't satisfy + the spread constraint. + - DoNotSchedule (default) tells the scheduler not to schedule it. + - ScheduleAnyway tells the scheduler to schedule the pod in any location, + but giving higher precedence to topologies that would help reduce the + skew. + A constraint is considered "Unsatisfiable" for an incoming pod + if and only if every possible node assignment for that pod would violate + "MaxSkew" on some topology. + For example, in a 3-zone cluster, MaxSkew is set to 1, and pods with the same + labelSelector spread as 3/1/1: + | zone1 | zone2 | zone3 | + | P P P | P | P | + If WhenUnsatisfiable is set to DoNotSchedule, incoming pod can only be scheduled + to zone2(zone3) to become 3/2/1(3/1/2) as ActualSkew(2-1) on zone2(zone3) satisfies + MaxSkew(1). In other words, the cluster can still be imbalanced, but scheduler + won't make it *more* imbalanced. + It's a required field. + type: string + required: + - maxSkew + - topologyKey + - whenUnsatisfiable + type: object + type: array + x-kubernetes-list-map-keys: + - topologyKey + - whenUnsatisfiable + x-kubernetes-list-type: map + volumes: + description: |- + List of volumes that can be mounted by containers belonging to the pod. + More info: https://kubernetes.io/docs/concepts/storage/volumes + items: + description: Volume represents a named volume in a pod + that may be accessed by any container in the pod. + properties: + awsElasticBlockStore: + description: |- + awsElasticBlockStore represents an AWS Disk resource that is attached to a + kubelet's host machine and then exposed to the pod. + More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore + properties: + fsType: + description: |- + fsType is the filesystem type of the volume that you want to mount. + Tip: Ensure that the filesystem type is supported by the host operating system. + Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. + More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore + TODO: how do we prevent errors in the filesystem from compromising the machine + type: string + partition: + description: |- + partition is the partition in the volume that you want to mount. + If omitted, the default is to mount by volume name. + Examples: For volume /dev/sda1, you specify the partition as "1". + Similarly, the volume partition for /dev/sda is "0" (or you can leave the property empty). + format: int32 + type: integer + readOnly: + description: |- + readOnly value true will force the readOnly setting in VolumeMounts. + More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore + type: boolean + volumeID: + description: |- + volumeID is unique ID of the persistent disk resource in AWS (Amazon EBS volume). + More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore + type: string + required: + - volumeID + type: object + azureDisk: + description: azureDisk represents an Azure Data + Disk mount on the host and bind mount to the pod. + properties: + cachingMode: + description: 'cachingMode is the Host Caching + mode: None, Read Only, Read Write.' + type: string + diskName: + description: diskName is the Name of the data + disk in the blob storage + type: string + diskURI: + description: diskURI is the URI of data disk + in the blob storage + type: string + fsType: description: |- - GMSACredentialSpec is where the GMSA admission webhook - (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the - GMSA credential spec named by the GMSACredentialSpecName field. + fsType is Filesystem type to mount. + Must be a filesystem type supported by the host operating system. + Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. type: string - gmsaCredentialSpecName: - description: - GMSACredentialSpecName is the name - of the GMSA credential spec to use. + kind: + description: 'kind expected values are Shared: + multiple blob disks per storage account Dedicated: + single blob disk per storage account Managed: + azure managed data disk (only in managed availability + set). defaults to shared' type: string - hostProcess: + readOnly: description: |- - HostProcess determines if a container should be run as a 'Host Process' container. - All of a Pod's containers must have the same effective HostProcess value - (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). - In addition, if HostProcess is true then HostNetwork must also be set to true. + readOnly Defaults to false (read/write). ReadOnly here will force + the ReadOnly setting in VolumeMounts. type: boolean - runAsUserName: + required: + - diskName + - diskURI + type: object + azureFile: + description: azureFile represents an Azure File + Service mount on the host and bind mount to the + pod. + properties: + readOnly: description: |- - The UserName in Windows to run the entrypoint of the container process. - Defaults to the user specified in image metadata if unspecified. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. + readOnly defaults to false (read/write). ReadOnly here will force + the ReadOnly setting in VolumeMounts. + type: boolean + secretName: + description: secretName is the name of secret + that contains Azure Storage Account Name and + Key type: string + shareName: + description: shareName is the azure share Name + type: string + required: + - secretName + - shareName type: object - type: object - serviceAccount: - description: |- - DeprecatedServiceAccount is a depreciated alias for ServiceAccountName. - Deprecated: Use serviceAccountName instead. - type: string - serviceAccountName: - description: |- - ServiceAccountName is the name of the ServiceAccount to use to run this pod. - More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/ - type: string - setHostnameAsFQDN: - description: |- - If true the pod's hostname will be configured as the pod's FQDN, rather than the leaf name (the default). - In Linux containers, this means setting the FQDN in the hostname field of the kernel (the nodename field of struct utsname). - In Windows containers, this means setting the registry value of hostname for the registry key HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters to FQDN. - If a pod does not have FQDN, this has no effect. - Default to false. - type: boolean - shareProcessNamespace: - description: |- - Share a single process namespace between all of the containers in a pod. - When this is set containers will be able to view and signal processes from other containers - in the same pod, and the first process in each container will not be assigned PID 1. - HostPID and ShareProcessNamespace cannot both be set. - Optional: Default to false. - type: boolean - subdomain: - description: |- - If specified, the fully qualified Pod hostname will be "...svc.". - If not specified, the pod will not have a domainname at all. - type: string - terminationGracePeriodSeconds: - description: |- - Optional duration in seconds the pod needs to terminate gracefully. May be decreased in delete request. - Value must be non-negative integer. The value zero indicates stop immediately via - the kill signal (no opportunity to shut down). - If this value is nil, the default grace period will be used instead. - The grace period is the duration in seconds after the processes running in the pod are sent - a termination signal and the time when the processes are forcibly halted with a kill signal. - Set this value longer than the expected cleanup time for your process. - Defaults to 30 seconds. - format: int64 - type: integer - tolerations: - description: If specified, the pod's tolerations. - items: - description: |- - The pod this Toleration is attached to tolerates any taint that matches - the triple using the matching operator . - properties: - effect: - description: |- - Effect indicates the taint effect to match. Empty means match all taint effects. - When specified, allowed values are NoSchedule, PreferNoSchedule and NoExecute. - type: string - key: - description: |- - Key is the taint key that the toleration applies to. Empty means match all taint keys. - If the key is empty, operator must be Exists; this combination means to match all values and all keys. - type: string - operator: - description: |- - Operator represents a key's relationship to the value. - Valid operators are Exists and Equal. Defaults to Equal. - Exists is equivalent to wildcard for value, so that a pod can - tolerate all taints of a particular category. - type: string - tolerationSeconds: - description: |- - TolerationSeconds represents the period of time the toleration (which must be - of effect NoExecute, otherwise this field is ignored) tolerates the taint. By default, - it is not set, which means tolerate the taint forever (do not evict). Zero and - negative values will be treated as 0 (evict immediately) by the system. - format: int64 - type: integer - value: - description: |- - Value is the taint value the toleration matches to. - If the operator is Exists, the value should be empty, otherwise just a regular string. - type: string - type: object - type: array - topologySpreadConstraints: - description: |- - TopologySpreadConstraints describes how a group of pods ought to spread across topology - domains. Scheduler will schedule pods in a way which abides by the constraints. - All topologySpreadConstraints are ANDed. - items: - description: - TopologySpreadConstraint specifies how - to spread matching pods among the given topology. - properties: - labelSelector: - description: |- - LabelSelector is used to find matching pods. - Pods that match this label selector are counted to determine the number of pods - in their corresponding topology domain. - properties: - matchExpressions: - description: - matchExpressions is a list of label - selector requirements. The requirements are - ANDed. - items: + cephfs: + description: cephFS represents a Ceph FS mount on + the host that shares a pod's lifetime + properties: + monitors: + description: |- + monitors is Required: Monitors is a collection of Ceph monitors + More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it + items: + type: string + type: array + path: + description: 'path is Optional: Used as the + mounted root, rather than the full Ceph tree, + default is /' + type: string + readOnly: + description: |- + readOnly is Optional: Defaults to false (read/write). ReadOnly here will force + the ReadOnly setting in VolumeMounts. + More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it + type: boolean + secretFile: + description: |- + secretFile is Optional: SecretFile is the path to key ring for User, default is /etc/ceph/user.secret + More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it + type: string + secretRef: + description: |- + secretRef is Optional: SecretRef is reference to the authentication secret for User, default is empty. + More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it + properties: + name: description: |- - A label selector requirement is a selector that contains values, a key, and an operator that - relates the key and values. - properties: - key: - description: - key is the label key that - the selector applies to. - type: string - operator: - description: |- - operator represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists and DoesNotExist. - type: string - values: - description: |- - values is an array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. This array is replaced during a strategic - merge patch. - items: - type: string - type: array - required: - - key - - operator - type: object - type: array - matchLabels: - additionalProperties: + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? type: string - description: |- - matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels - map is equivalent to an element of matchExpressions, whose key field is "key", the - operator is "In", and the values array contains only "value". The requirements are ANDed. - type: object - type: object - x-kubernetes-map-type: atomic - matchLabelKeys: - description: |- - MatchLabelKeys is a set of pod label keys to select the pods over which - spreading will be calculated. The keys are used to lookup values from the - incoming pod labels, those key-value labels are ANDed with labelSelector - to select the group of existing pods over which spreading will be calculated - for the incoming pod. The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. - MatchLabelKeys cannot be set when LabelSelector isn't set. - Keys that don't exist in the incoming pod labels will - be ignored. A null or empty list means only match against labelSelector. - - - This is a beta field and requires the MatchLabelKeysInPodTopologySpread feature gate to be enabled (enabled by default). - items: + type: object + x-kubernetes-map-type: atomic + user: + description: |- + user is optional: User is the rados user name, default is admin + More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it type: string - type: array - x-kubernetes-list-type: atomic - maxSkew: - description: |- - MaxSkew describes the degree to which pods may be unevenly distributed. - When `whenUnsatisfiable=DoNotSchedule`, it is the maximum permitted difference - between the number of matching pods in the target topology and the global minimum. - The global minimum is the minimum number of matching pods in an eligible domain - or zero if the number of eligible domains is less than MinDomains. - For example, in a 3-zone cluster, MaxSkew is set to 1, and pods with the same - labelSelector spread as 2/2/1: - In this case, the global minimum is 1. - | zone1 | zone2 | zone3 | - | P P | P P | P | - - if MaxSkew is 1, incoming pod can only be scheduled to zone3 to become 2/2/2; - scheduling it onto zone1(zone2) would make the ActualSkew(3-1) on zone1(zone2) - violate MaxSkew(1). - - if MaxSkew is 2, incoming pod can be scheduled onto any zone. - When `whenUnsatisfiable=ScheduleAnyway`, it is used to give higher precedence - to topologies that satisfy it. - It's a required field. Default value is 1 and 0 is not allowed. - format: int32 - type: integer - minDomains: - description: |- - MinDomains indicates a minimum number of eligible domains. - When the number of eligible domains with matching topology keys is less than minDomains, - Pod Topology Spread treats "global minimum" as 0, and then the calculation of Skew is performed. - And when the number of eligible domains with matching topology keys equals or greater than minDomains, - this value has no effect on scheduling. - As a result, when the number of eligible domains is less than minDomains, - scheduler won't schedule more than maxSkew Pods to those domains. - If value is nil, the constraint behaves as if MinDomains is equal to 1. - Valid values are integers greater than 0. - When value is not nil, WhenUnsatisfiable must be DoNotSchedule. - - - For example, in a 3-zone cluster, MaxSkew is set to 2, MinDomains is set to 5 and pods with the same - labelSelector spread as 2/2/2: - | zone1 | zone2 | zone3 | - | P P | P P | P P | - The number of domains is less than 5(MinDomains), so "global minimum" is treated as 0. - In this situation, new pod with the same labelSelector cannot be scheduled, - because computed skew will be 3(3 - 0) if new Pod is scheduled to any of the three zones, - it will violate MaxSkew. - - - This is a beta field and requires the MinDomainsInPodTopologySpread feature gate to be enabled (enabled by default). - format: int32 - type: integer - nodeAffinityPolicy: - description: |- - NodeAffinityPolicy indicates how we will treat Pod's nodeAffinity/nodeSelector - when calculating pod topology spread skew. Options are: - - Honor: only nodes matching nodeAffinity/nodeSelector are included in the calculations. - - Ignore: nodeAffinity/nodeSelector are ignored. All nodes are included in the calculations. - - - If this value is nil, the behavior is equivalent to the Honor policy. - This is a beta-level feature default enabled by the NodeInclusionPolicyInPodTopologySpread feature flag. - type: string - nodeTaintsPolicy: - description: |- - NodeTaintsPolicy indicates how we will treat node taints when calculating - pod topology spread skew. Options are: - - Honor: nodes without taints, along with tainted nodes for which the incoming pod - has a toleration, are included. - - Ignore: node taints are ignored. All nodes are included. - - - If this value is nil, the behavior is equivalent to the Ignore policy. - This is a beta-level feature default enabled by the NodeInclusionPolicyInPodTopologySpread feature flag. - type: string - topologyKey: - description: |- - TopologyKey is the key of node labels. Nodes that have a label with this key - and identical values are considered to be in the same topology. - We consider each as a "bucket", and try to put balanced number - of pods into each bucket. - We define a domain as a particular instance of a topology. - Also, we define an eligible domain as a domain whose nodes meet the requirements of - nodeAffinityPolicy and nodeTaintsPolicy. - e.g. If TopologyKey is "kubernetes.io/hostname", each Node is a domain of that topology. - And, if TopologyKey is "topology.kubernetes.io/zone", each zone is a domain of that topology. - It's a required field. - type: string - whenUnsatisfiable: - description: |- - WhenUnsatisfiable indicates how to deal with a pod if it doesn't satisfy - the spread constraint. - - DoNotSchedule (default) tells the scheduler not to schedule it. - - ScheduleAnyway tells the scheduler to schedule the pod in any location, - but giving higher precedence to topologies that would help reduce the - skew. - A constraint is considered "Unsatisfiable" for an incoming pod - if and only if every possible node assignment for that pod would violate - "MaxSkew" on some topology. - For example, in a 3-zone cluster, MaxSkew is set to 1, and pods with the same - labelSelector spread as 3/1/1: - | zone1 | zone2 | zone3 | - | P P P | P | P | - If WhenUnsatisfiable is set to DoNotSchedule, incoming pod can only be scheduled - to zone2(zone3) to become 3/2/1(3/1/2) as ActualSkew(2-1) on zone2(zone3) satisfies - MaxSkew(1). In other words, the cluster can still be imbalanced, but scheduler - won't make it *more* imbalanced. - It's a required field. - type: string - required: - - maxSkew - - topologyKey - - whenUnsatisfiable - type: object - type: array - x-kubernetes-list-map-keys: - - topologyKey - - whenUnsatisfiable - x-kubernetes-list-type: map - volumes: - description: |- - List of volumes that can be mounted by containers belonging to the pod. - More info: https://kubernetes.io/docs/concepts/storage/volumes - items: - description: - Volume represents a named volume in a pod - that may be accessed by any container in the pod. - properties: - awsElasticBlockStore: - description: |- - awsElasticBlockStore represents an AWS Disk resource that is attached to a - kubelet's host machine and then exposed to the pod. - More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore - properties: - fsType: - description: |- - fsType is the filesystem type of the volume that you want to mount. - Tip: Ensure that the filesystem type is supported by the host operating system. - Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore - TODO: how do we prevent errors in the filesystem from compromising the machine - type: string - partition: - description: |- - partition is the partition in the volume that you want to mount. - If omitted, the default is to mount by volume name. - Examples: For volume /dev/sda1, you specify the partition as "1". - Similarly, the volume partition for /dev/sda is "0" (or you can leave the property empty). - format: int32 - type: integer - readOnly: - description: |- - readOnly value true will force the readOnly setting in VolumeMounts. - More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore - type: boolean - volumeID: - description: |- - volumeID is unique ID of the persistent disk resource in AWS (Amazon EBS volume). - More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore - type: string - required: - - volumeID - type: object - azureDisk: - description: - azureDisk represents an Azure Data - Disk mount on the host and bind mount to the pod. - properties: - cachingMode: - description: - "cachingMode is the Host Caching - mode: None, Read Only, Read Write." - type: string - diskName: - description: - diskName is the Name of the data - disk in the blob storage - type: string - diskURI: - description: - diskURI is the URI of data disk - in the blob storage - type: string - fsType: - description: |- - fsType is Filesystem type to mount. - Must be a filesystem type supported by the host operating system. - Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - type: string - kind: - description: - "kind expected values are Shared: - multiple blob disks per storage account Dedicated: - single blob disk per storage account Managed: - azure managed data disk (only in managed availability - set). defaults to shared" - type: string - readOnly: - description: |- - readOnly Defaults to false (read/write). ReadOnly here will force - the ReadOnly setting in VolumeMounts. - type: boolean - required: - - diskName - - diskURI - type: object - azureFile: - description: - azureFile represents an Azure File - Service mount on the host and bind mount to the - pod. - properties: - readOnly: - description: |- - readOnly defaults to false (read/write). ReadOnly here will force - the ReadOnly setting in VolumeMounts. - type: boolean - secretName: - description: - secretName is the name of secret - that contains Azure Storage Account Name and - Key - type: string - shareName: - description: shareName is the azure share Name - type: string - required: - - secretName - - shareName - type: object - cephfs: - description: - cephFS represents a Ceph FS mount on - the host that shares a pod's lifetime - properties: - monitors: - description: |- - monitors is Required: Monitors is a collection of Ceph monitors - More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it - items: + required: + - monitors + type: object + cinder: + description: |- + cinder represents a cinder volume attached and mounted on kubelets host machine. + More info: https://examples.k8s.io/mysql-cinder-pd/README.md + properties: + fsType: + description: |- + fsType is the filesystem type to mount. + Must be a filesystem type supported by the host operating system. + Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. + More info: https://examples.k8s.io/mysql-cinder-pd/README.md + type: string + readOnly: + description: |- + readOnly defaults to false (read/write). ReadOnly here will force + the ReadOnly setting in VolumeMounts. + More info: https://examples.k8s.io/mysql-cinder-pd/README.md + type: boolean + secretRef: + description: |- + secretRef is optional: points to a secret object containing parameters used to connect + to OpenStack. + properties: + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? type: string - type: array - path: - description: - "path is Optional: Used as the - mounted root, rather than the full Ceph tree, - default is /" - type: string - readOnly: - description: |- - readOnly is Optional: Defaults to false (read/write). ReadOnly here will force - the ReadOnly setting in VolumeMounts. - More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it - type: boolean - secretFile: - description: |- - secretFile is Optional: SecretFile is the path to key ring for User, default is /etc/ceph/user.secret - More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it - type: string - secretRef: - description: |- - secretRef is Optional: SecretRef is reference to the authentication secret for User, default is empty. - More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it + type: object + x-kubernetes-map-type: atomic + volumeID: + description: |- + volumeID used to identify the volume in cinder. + More info: https://examples.k8s.io/mysql-cinder-pd/README.md + type: string + required: + - volumeID + type: object + configMap: + description: configMap represents a configMap that + should populate this volume + properties: + defaultMode: + description: |- + defaultMode is optional: mode bits used to set permissions on created files by default. + Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. + YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. + Defaults to 0644. + Directories within the path are not affected by this setting. + This might be in conflict with other options that affect the file + mode, like fsGroup, and the result can be other mode bits set. + format: int32 + type: integer + items: + description: |- + items if unspecified, each key-value pair in the Data field of the referenced + ConfigMap will be projected into the volume as a file whose name is the + key and content is the value. If specified, the listed keys will be + projected into the specified paths, and unlisted keys will not be + present. If a key is specified which is not present in the ConfigMap, + the volume setup will error unless it is marked optional. Paths must be + relative and may not contain the '..' path or start with '..'. + items: + description: Maps a string key to a path within + a volume. properties: - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? + key: + description: key is the key to project. type: string - type: object - x-kubernetes-map-type: atomic - user: - description: |- - user is optional: User is the rados user name, default is admin - More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it - type: string - required: - - monitors - type: object - cinder: - description: |- - cinder represents a cinder volume attached and mounted on kubelets host machine. - More info: https://examples.k8s.io/mysql-cinder-pd/README.md - properties: - fsType: - description: |- - fsType is the filesystem type to mount. - Must be a filesystem type supported by the host operating system. - Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - More info: https://examples.k8s.io/mysql-cinder-pd/README.md - type: string - readOnly: - description: |- - readOnly defaults to false (read/write). ReadOnly here will force - the ReadOnly setting in VolumeMounts. - More info: https://examples.k8s.io/mysql-cinder-pd/README.md - type: boolean - secretRef: - description: |- - secretRef is optional: points to a secret object containing parameters used to connect - to OpenStack. - properties: - name: + mode: description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? + mode is Optional: mode bits used to set permissions on this file. + Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. + YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. + If not specified, the volume defaultMode will be used. + This might be in conflict with other options that affect the file + mode, like fsGroup, and the result can be other mode bits set. + format: int32 + type: integer + path: + description: |- + path is the relative path of the file to map the key to. + May not be an absolute path. + May not contain the path element '..'. + May not start with the string '..'. type: string + required: + - key + - path type: object - x-kubernetes-map-type: atomic - volumeID: - description: |- - volumeID used to identify the volume in cinder. - More info: https://examples.k8s.io/mysql-cinder-pd/README.md + type: array + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + optional: + description: optional specify whether the ConfigMap + or its keys must be defined + type: boolean + type: object + x-kubernetes-map-type: atomic + csi: + description: csi (Container Storage Interface) represents + ephemeral storage that is handled by certain external + CSI drivers (Beta feature). + properties: + driver: + description: |- + driver is the name of the CSI driver that handles this volume. + Consult with your admin for the correct name as registered in the cluster. + type: string + fsType: + description: |- + fsType to mount. Ex. "ext4", "xfs", "ntfs". + If not provided, the empty value is passed to the associated CSI driver + which will determine the default filesystem to apply. + type: string + nodePublishSecretRef: + description: |- + nodePublishSecretRef is a reference to the secret object containing + sensitive information to pass to the CSI driver to complete the CSI + NodePublishVolume and NodeUnpublishVolume calls. + This field is optional, and may be empty if no secret is required. If the + secret object contains more than one secret, all secret references are passed. + properties: + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + type: object + x-kubernetes-map-type: atomic + readOnly: + description: |- + readOnly specifies a read-only configuration for the volume. + Defaults to false (read/write). + type: boolean + volumeAttributes: + additionalProperties: type: string - required: - - volumeID - type: object - configMap: - description: - configMap represents a configMap that - should populate this volume - properties: - defaultMode: - description: |- - defaultMode is optional: mode bits used to set permissions on created files by default. - Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. - YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. - Defaults to 0644. - Directories within the path are not affected by this setting. - This might be in conflict with other options that affect the file - mode, like fsGroup, and the result can be other mode bits set. - format: int32 - type: integer + description: |- + volumeAttributes stores driver-specific properties that are passed to the CSI + driver. Consult your driver's documentation for supported values. + type: object + required: + - driver + type: object + downwardAPI: + description: downwardAPI represents downward API + about the pod that should populate this volume + properties: + defaultMode: + description: |- + Optional: mode bits to use on created files by default. Must be a + Optional: mode bits used to set permissions on created files by default. + Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. + YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. + Defaults to 0644. + Directories within the path are not affected by this setting. + This might be in conflict with other options that affect the file + mode, like fsGroup, and the result can be other mode bits set. + format: int32 + type: integer + items: + description: Items is a list of downward API + volume file items: - description: |- - items if unspecified, each key-value pair in the Data field of the referenced - ConfigMap will be projected into the volume as a file whose name is the - key and content is the value. If specified, the listed keys will be - projected into the specified paths, and unlisted keys will not be - present. If a key is specified which is not present in the ConfigMap, - the volume setup will error unless it is marked optional. Paths must be - relative and may not contain the '..' path or start with '..'. - items: - description: - Maps a string key to a path within - a volume. - properties: - key: - description: key is the key to project. - type: string - mode: - description: |- - mode is Optional: mode bits used to set permissions on this file. - Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. - YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. - If not specified, the volume defaultMode will be used. - This might be in conflict with other options that affect the file - mode, like fsGroup, and the result can be other mode bits set. - format: int32 - type: integer - path: - description: |- - path is the relative path of the file to map the key to. - May not be an absolute path. - May not contain the path element '..'. - May not start with the string '..'. - type: string - required: - - key - - path - type: object - type: array - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - optional specify whether the ConfigMap - or its keys must be defined - type: boolean - type: object - x-kubernetes-map-type: atomic - csi: - description: - csi (Container Storage Interface) represents - ephemeral storage that is handled by certain external - CSI drivers (Beta feature). - properties: - driver: - description: |- - driver is the name of the CSI driver that handles this volume. - Consult with your admin for the correct name as registered in the cluster. - type: string - fsType: - description: |- - fsType to mount. Ex. "ext4", "xfs", "ntfs". - If not provided, the empty value is passed to the associated CSI driver - which will determine the default filesystem to apply. - type: string - nodePublishSecretRef: - description: |- - nodePublishSecretRef is a reference to the secret object containing - sensitive information to pass to the CSI driver to complete the CSI - NodePublishVolume and NodeUnpublishVolume calls. - This field is optional, and may be empty if no secret is required. If the - secret object contains more than one secret, all secret references are passed. - properties: - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? + description: DownwardAPIVolumeFile represents + information to create the file containing + the pod field + properties: + fieldRef: + description: 'Required: Selects a field + of the pod: only annotations, labels, + name and namespace are supported.' + properties: + apiVersion: + description: Version of the schema + the FieldPath is written in terms + of, defaults to "v1". + type: string + fieldPath: + description: Path of the field to + select in the specified API version. + type: string + required: + - fieldPath + type: object + x-kubernetes-map-type: atomic + mode: + description: |- + Optional: mode bits used to set permissions on this file, must be an octal value + between 0000 and 0777 or a decimal value between 0 and 511. + YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. + If not specified, the volume defaultMode will be used. + This might be in conflict with other options that affect the file + mode, like fsGroup, and the result can be other mode bits set. + format: int32 + type: integer + path: + description: 'Required: Path is the relative + path name of the file to be created. + Must not be absolute or contain the + ''..'' path. Must be utf-8 encoded. + The first item of the relative path + must not start with ''..''' type: string + resourceFieldRef: + description: |- + Selects a resource of the container: only resources limits and requests + (limits.cpu, limits.memory, requests.cpu and requests.memory) are currently supported. + properties: + containerName: + description: 'Container name: required + for volumes, optional for env vars' + type: string + divisor: + anyOf: + - type: integer + - type: string + description: Specifies the output + format of the exposed resources, + defaults to "1" + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + resource: + description: 'Required: resource to + select' + type: string + required: + - resource + type: object + x-kubernetes-map-type: atomic + required: + - path type: object - x-kubernetes-map-type: atomic - readOnly: - description: |- - readOnly specifies a read-only configuration for the volume. - Defaults to false (read/write). - type: boolean - volumeAttributes: - additionalProperties: - type: string - description: |- - volumeAttributes stores driver-specific properties that are passed to the CSI - driver. Consult your driver's documentation for supported values. - type: object - required: - - driver - type: object - downwardAPI: - description: - downwardAPI represents downward API - about the pod that should populate this volume - properties: - defaultMode: - description: |- - Optional: mode bits to use on created files by default. Must be a - Optional: mode bits used to set permissions on created files by default. - Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. - YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. - Defaults to 0644. - Directories within the path are not affected by this setting. - This might be in conflict with other options that affect the file - mode, like fsGroup, and the result can be other mode bits set. - format: int32 - type: integer - items: - description: - Items is a list of downward API - volume file - items: - description: - DownwardAPIVolumeFile represents - information to create the file containing - the pod field - properties: - fieldRef: - description: - "Required: Selects a field - of the pod: only annotations, labels, - name and namespace are supported." - properties: - apiVersion: - description: - Version of the schema - the FieldPath is written in terms - of, defaults to "v1". - type: string - fieldPath: - description: - Path of the field to - select in the specified API version. - type: string - required: - - fieldPath - type: object - x-kubernetes-map-type: atomic - mode: - description: |- - Optional: mode bits used to set permissions on this file, must be an octal value - between 0000 and 0777 or a decimal value between 0 and 511. - YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. - If not specified, the volume defaultMode will be used. - This might be in conflict with other options that affect the file - mode, like fsGroup, and the result can be other mode bits set. - format: int32 - type: integer - path: - description: - "Required: Path is the relative - path name of the file to be created. - Must not be absolute or contain the - '..' path. Must be utf-8 encoded. - The first item of the relative path - must not start with '..'" - type: string - resourceFieldRef: - description: |- - Selects a resource of the container: only resources limits and requests - (limits.cpu, limits.memory, requests.cpu and requests.memory) are currently supported. - properties: - containerName: - description: - "Container name: required - for volumes, optional for env vars" - type: string - divisor: - anyOf: - - type: integer - - type: string - description: - Specifies the output - format of the exposed resources, - defaults to "1" - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ - x-kubernetes-int-or-string: true - resource: - description: - "Required: resource to - select" - type: string - required: - - resource - type: object - x-kubernetes-map-type: atomic - required: - - path - type: object - type: array - type: object - emptyDir: - description: |- - emptyDir represents a temporary directory that shares a pod's lifetime. - More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir - properties: - medium: - description: |- - medium represents what type of storage medium should back this directory. - The default is "" which means to use the node's default medium. - Must be an empty string (default) or Memory. - More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir - type: string - sizeLimit: - anyOf: - - type: integer - - type: string - description: |- - sizeLimit is the total amount of local storage required for this EmptyDir volume. - The size limit is also applicable for memory medium. - The maximum usage on memory medium EmptyDir would be the minimum value between - the SizeLimit specified here and the sum of memory limits of all containers in a pod. - The default is nil which means that the limit is undefined. - More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ - x-kubernetes-int-or-string: true - type: object - ephemeral: - description: |- - ephemeral represents a volume that is handled by a cluster storage driver. - The volume's lifecycle is tied to the pod that defines it - it will be created before the pod starts, - and deleted when the pod is removed. + type: array + type: object + emptyDir: + description: |- + emptyDir represents a temporary directory that shares a pod's lifetime. + More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir + properties: + medium: + description: |- + medium represents what type of storage medium should back this directory. + The default is "" which means to use the node's default medium. + Must be an empty string (default) or Memory. + More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir + type: string + sizeLimit: + anyOf: + - type: integer + - type: string + description: |- + sizeLimit is the total amount of local storage required for this EmptyDir volume. + The size limit is also applicable for memory medium. + The maximum usage on memory medium EmptyDir would be the minimum value between + the SizeLimit specified here and the sum of memory limits of all containers in a pod. + The default is nil which means that the limit is undefined. + More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + type: object + ephemeral: + description: |- + ephemeral represents a volume that is handled by a cluster storage driver. + The volume's lifecycle is tied to the pod that defines it - it will be created before the pod starts, + and deleted when the pod is removed. - Use this if: - a) the volume is only needed while the pod runs, - b) features of normal volumes like restoring from snapshot or capacity - tracking are needed, - c) the storage driver is specified through a storage class, and - d) the storage driver supports dynamic volume provisioning through - a PersistentVolumeClaim (see EphemeralVolumeSource for more - information on the connection between this volume type - and PersistentVolumeClaim). + Use this if: + a) the volume is only needed while the pod runs, + b) features of normal volumes like restoring from snapshot or capacity + tracking are needed, + c) the storage driver is specified through a storage class, and + d) the storage driver supports dynamic volume provisioning through + a PersistentVolumeClaim (see EphemeralVolumeSource for more + information on the connection between this volume type + and PersistentVolumeClaim). - Use PersistentVolumeClaim or one of the vendor-specific - APIs for volumes that persist for longer than the lifecycle - of an individual pod. + Use PersistentVolumeClaim or one of the vendor-specific + APIs for volumes that persist for longer than the lifecycle + of an individual pod. - Use CSI for light-weight local ephemeral volumes if the CSI driver is meant to - be used that way - see the documentation of the driver for - more information. + Use CSI for light-weight local ephemeral volumes if the CSI driver is meant to + be used that way - see the documentation of the driver for + more information. - A pod can use both types of ephemeral volumes and - persistent volumes at the same time. - properties: - volumeClaimTemplate: - description: |- - Will be used to create a stand-alone PVC to provision the volume. - The pod in which this EphemeralVolumeSource is embedded will be the - owner of the PVC, i.e. the PVC will be deleted together with the - pod. The name of the PVC will be `-` where - `` is the name from the `PodSpec.Volumes` array - entry. Pod validation will reject the pod if the concatenated name - is not valid for a PVC (for example, too long). + A pod can use both types of ephemeral volumes and + persistent volumes at the same time. + properties: + volumeClaimTemplate: + description: |- + Will be used to create a stand-alone PVC to provision the volume. + The pod in which this EphemeralVolumeSource is embedded will be the + owner of the PVC, i.e. the PVC will be deleted together with the + pod. The name of the PVC will be `-` where + `` is the name from the `PodSpec.Volumes` array + entry. Pod validation will reject the pod if the concatenated name + is not valid for a PVC (for example, too long). - An existing PVC with that name that is not owned by the pod - will *not* be used for the pod to avoid using an unrelated - volume by mistake. Starting the pod is then blocked until - the unrelated PVC is removed. If such a pre-created PVC is - meant to be used by the pod, the PVC has to updated with an - owner reference to the pod once the pod exists. Normally - this should not be necessary, but it may be useful when - manually reconstructing a broken cluster. + An existing PVC with that name that is not owned by the pod + will *not* be used for the pod to avoid using an unrelated + volume by mistake. Starting the pod is then blocked until + the unrelated PVC is removed. If such a pre-created PVC is + meant to be used by the pod, the PVC has to updated with an + owner reference to the pod once the pod exists. Normally + this should not be necessary, but it may be useful when + manually reconstructing a broken cluster. - This field is read-only and no changes will be made by Kubernetes - to the PVC after it has been created. + This field is read-only and no changes will be made by Kubernetes + to the PVC after it has been created. - Required, must not be nil. - properties: - metadata: - description: |- - May contain labels and annotations that will be copied into the PVC - when creating it. No other fields are allowed and will be rejected during - validation. - properties: - annotations: - additionalProperties: + Required, must not be nil. + properties: + metadata: + description: |- + May contain labels and annotations that will be copied into the PVC + when creating it. No other fields are allowed and will be rejected during + validation. + properties: + annotations: + additionalProperties: + type: string + type: object + finalizers: + items: + type: string + type: array + labels: + additionalProperties: + type: string + type: object + name: + type: string + namespace: + type: string + type: object + spec: + description: |- + The specification for the PersistentVolumeClaim. The entire content is + copied unchanged into the PVC that gets created from this + template. The same fields as in a PersistentVolumeClaim + are also valid here. + properties: + accessModes: + description: |- + accessModes contains the desired access modes the volume should have. + More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1 + items: + type: string + type: array + dataSource: + description: |- + dataSource field can be used to specify either: + * An existing VolumeSnapshot object (snapshot.storage.k8s.io/VolumeSnapshot) + * An existing PVC (PersistentVolumeClaim) + If the provisioner or an external controller can support the specified data source, + it will create a new volume based on the contents of the specified data source. + When the AnyVolumeDataSource feature gate is enabled, dataSource contents will be copied to dataSourceRef, + and dataSourceRef contents will be copied to dataSource when dataSourceRef.namespace is not specified. + If the namespace is specified, then dataSourceRef will not be copied to dataSource. + properties: + apiGroup: + description: |- + APIGroup is the group for the resource being referenced. + If APIGroup is not specified, the specified Kind must be in the core API group. + For any other third-party types, APIGroup is required. type: string - type: object - finalizers: - items: + kind: + description: Kind is the type of + resource being referenced type: string - type: array - labels: - additionalProperties: + name: + description: Name is the name of + resource being referenced type: string - type: object - name: - type: string - namespace: - type: string - type: object - spec: - description: |- - The specification for the PersistentVolumeClaim. The entire content is - copied unchanged into the PVC that gets created from this - template. The same fields as in a PersistentVolumeClaim - are also valid here. - properties: - accessModes: - description: |- - accessModes contains the desired access modes the volume should have. - More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1 - items: + required: + - kind + - name + type: object + x-kubernetes-map-type: atomic + dataSourceRef: + description: |- + dataSourceRef specifies the object from which to populate the volume with data, if a non-empty + volume is desired. This may be any object from a non-empty API group (non + core object) or a PersistentVolumeClaim object. + When this field is specified, volume binding will only succeed if the type of + the specified object matches some installed volume populator or dynamic + provisioner. + This field will replace the functionality of the dataSource field and as such + if both fields are non-empty, they must have the same value. For backwards + compatibility, when namespace isn't specified in dataSourceRef, + both fields (dataSource and dataSourceRef) will be set to the same + value automatically if one of them is empty and the other is non-empty. + When namespace is specified in dataSourceRef, + dataSource isn't set to the same value and must be empty. + There are three important differences between dataSource and dataSourceRef: + * While dataSource only allows two specific types of objects, dataSourceRef + allows any non-core object, as well as PersistentVolumeClaim objects. + * While dataSource ignores disallowed values (dropping them), dataSourceRef + preserves all values, and generates an error if a disallowed value is + specified. + * While dataSource only allows local objects, dataSourceRef allows objects + in any namespaces. + (Beta) Using this field requires the AnyVolumeDataSource feature gate to be enabled. + (Alpha) Using the namespace field of dataSourceRef requires the CrossNamespaceVolumeDataSource feature gate to be enabled. + properties: + apiGroup: + description: |- + APIGroup is the group for the resource being referenced. + If APIGroup is not specified, the specified Kind must be in the core API group. + For any other third-party types, APIGroup is required. type: string - type: array - dataSource: - description: |- - dataSource field can be used to specify either: - * An existing VolumeSnapshot object (snapshot.storage.k8s.io/VolumeSnapshot) - * An existing PVC (PersistentVolumeClaim) - If the provisioner or an external controller can support the specified data source, - it will create a new volume based on the contents of the specified data source. - When the AnyVolumeDataSource feature gate is enabled, dataSource contents will be copied to dataSourceRef, - and dataSourceRef contents will be copied to dataSource when dataSourceRef.namespace is not specified. - If the namespace is specified, then dataSourceRef will not be copied to dataSource. - properties: - apiGroup: - description: |- - APIGroup is the group for the resource being referenced. - If APIGroup is not specified, the specified Kind must be in the core API group. - For any other third-party types, APIGroup is required. - type: string - kind: - description: - Kind is the type of - resource being referenced - type: string - name: - description: - Name is the name of - resource being referenced - type: string - required: - - kind - - name - type: object - x-kubernetes-map-type: atomic - dataSourceRef: - description: |- - dataSourceRef specifies the object from which to populate the volume with data, if a non-empty - volume is desired. This may be any object from a non-empty API group (non - core object) or a PersistentVolumeClaim object. - When this field is specified, volume binding will only succeed if the type of - the specified object matches some installed volume populator or dynamic - provisioner. - This field will replace the functionality of the dataSource field and as such - if both fields are non-empty, they must have the same value. For backwards - compatibility, when namespace isn't specified in dataSourceRef, - both fields (dataSource and dataSourceRef) will be set to the same - value automatically if one of them is empty and the other is non-empty. - When namespace is specified in dataSourceRef, - dataSource isn't set to the same value and must be empty. - There are three important differences between dataSource and dataSourceRef: - * While dataSource only allows two specific types of objects, dataSourceRef - allows any non-core object, as well as PersistentVolumeClaim objects. - * While dataSource ignores disallowed values (dropping them), dataSourceRef - preserves all values, and generates an error if a disallowed value is - specified. - * While dataSource only allows local objects, dataSourceRef allows objects - in any namespaces. - (Beta) Using this field requires the AnyVolumeDataSource feature gate to be enabled. - (Alpha) Using the namespace field of dataSourceRef requires the CrossNamespaceVolumeDataSource feature gate to be enabled. - properties: - apiGroup: - description: |- - APIGroup is the group for the resource being referenced. - If APIGroup is not specified, the specified Kind must be in the core API group. - For any other third-party types, APIGroup is required. - type: string - kind: - description: - Kind is the type of - resource being referenced - type: string - name: - description: - Name is the name of - resource being referenced - type: string - namespace: - description: |- - Namespace is the namespace of resource being referenced - Note that when a namespace is specified, a gateway.networking.k8s.io/ReferenceGrant object is required in the referent namespace to allow that namespace's owner to accept the reference. See the ReferenceGrant documentation for details. - (Alpha) This field requires the CrossNamespaceVolumeDataSource feature gate to be enabled. - type: string - required: - - kind - - name - type: object - resources: - description: |- - resources represents the minimum resources the volume should have. - If RecoverVolumeExpansionFailure feature is enabled users are allowed to specify resource requirements - that are lower than previous value but must still be higher than capacity recorded in the - status field of the claim. - More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources - properties: - limits: - additionalProperties: - anyOf: - - type: integer - - type: string - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ - x-kubernetes-int-or-string: true - description: |- - Limits describes the maximum amount of compute resources allowed. - More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ - type: object - requests: - additionalProperties: - anyOf: - - type: integer - - type: string - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ - x-kubernetes-int-or-string: true + kind: + description: Kind is the type of + resource being referenced + type: string + name: + description: Name is the name of + resource being referenced + type: string + namespace: + description: |- + Namespace is the namespace of resource being referenced + Note that when a namespace is specified, a gateway.networking.k8s.io/ReferenceGrant object is required in the referent namespace to allow that namespace's owner to accept the reference. See the ReferenceGrant documentation for details. + (Alpha) This field requires the CrossNamespaceVolumeDataSource feature gate to be enabled. + type: string + required: + - kind + - name + type: object + resources: + description: |- + resources represents the minimum resources the volume should have. + If RecoverVolumeExpansionFailure feature is enabled users are allowed to specify resource requirements + that are lower than previous value but must still be higher than capacity recorded in the + status field of the claim. + More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources + properties: + limits: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Limits describes the maximum amount of compute resources allowed. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + requests: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Requests describes the minimum amount of compute resources required. + If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, + otherwise to an implementation-defined value. Requests cannot exceed Limits. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + type: object + selector: + description: selector is a label query + over volumes to consider for binding. + properties: + matchExpressions: + description: matchExpressions is + a list of label selector requirements. + The requirements are ANDed. + items: description: |- - Requests describes the minimum amount of compute resources required. - If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, - otherwise to an implementation-defined value. Requests cannot exceed Limits. - More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ - type: object - type: object - selector: - description: - selector is a label query - over volumes to consider for binding. - properties: - matchExpressions: - description: - matchExpressions is - a list of label selector requirements. - The requirements are ANDed. - items: - description: |- - A label selector requirement is a selector that contains values, a key, and an operator that - relates the key and values. - properties: - key: - description: - key is the label - key that the selector applies - to. - type: string - operator: - description: |- - operator represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists and DoesNotExist. + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. + properties: + key: + description: key is the label + key that the selector applies + to. + type: string + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. + items: type: string - values: - description: |- - values is an array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. This array is replaced during a strategic - merge patch. - items: - type: string - type: array - required: - - key - - operator - type: object - type: array - matchLabels: - additionalProperties: - type: string - description: |- - matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels - map is equivalent to an element of matchExpressions, whose key field is "key", the - operator is "In", and the values array contains only "value". The requirements are ANDed. + type: array + required: + - key + - operator type: object - type: object - x-kubernetes-map-type: atomic - storageClassName: - description: |- - storageClassName is the name of the StorageClass required by the claim. - More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1 - type: string - volumeAttributesClassName: - description: |- - volumeAttributesClassName may be used to set the VolumeAttributesClass used by this claim. - If specified, the CSI driver will create or update the volume with the attributes defined - in the corresponding VolumeAttributesClass. This has a different purpose than storageClassName, - it can be changed after the claim is created. An empty string value means that no VolumeAttributesClass - will be applied to the claim but it's not allowed to reset this field to empty string once it is set. - If unspecified and the PersistentVolumeClaim is unbound, the default VolumeAttributesClass - will be set by the persistentvolume controller if it exists. - If the resource referred to by volumeAttributesClass does not exist, this PersistentVolumeClaim will be - set to a Pending state, as reflected by the modifyVolumeStatus field, until such as a resource - exists. - More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#volumeattributesclass - (Alpha) Using this field requires the VolumeAttributesClass feature gate to be enabled. - type: string - volumeMode: - description: |- - volumeMode defines what type of volume is required by the claim. - Value of Filesystem is implied when not included in claim spec. - type: string - volumeName: - description: - volumeName is the binding - reference to the PersistentVolume - backing this claim. - type: string - type: object - required: - - spec - type: object - type: object - fc: - description: - fc represents a Fibre Channel resource - that is attached to a kubelet's host machine and - then exposed to the pod. - properties: - fsType: - description: |- - fsType is the filesystem type to mount. - Must be a filesystem type supported by the host operating system. - Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - TODO: how do we prevent errors in the filesystem from compromising the machine - type: string - lun: - description: - "lun is Optional: FC target lun - number" - format: int32 - type: integer - readOnly: - description: |- - readOnly is Optional: Defaults to false (read/write). ReadOnly here will force - the ReadOnly setting in VolumeMounts. - type: boolean - targetWWNs: - description: - "targetWWNs is Optional: FC target - worldwide names (WWNs)" - items: - type: string - type: array - wwids: - description: |- - wwids Optional: FC volume world wide identifiers (wwids) - Either wwids or combination of targetWWNs and lun must be set, but not both simultaneously. - items: - type: string - type: array - type: object - flexVolume: - description: |- - flexVolume represents a generic volume resource that is - provisioned/attached using an exec based plugin. - properties: - driver: - description: - driver is the name of the driver - to use for this volume. - type: string - fsType: - description: |- - fsType is the filesystem type to mount. - Must be a filesystem type supported by the host operating system. - Ex. "ext4", "xfs", "ntfs". The default filesystem depends on FlexVolume script. - type: string - options: - additionalProperties: - type: string - description: - "options is Optional: this field - holds extra command options if any." - type: object - readOnly: - description: |- - readOnly is Optional: defaults to false (read/write). ReadOnly here will force - the ReadOnly setting in VolumeMounts. - type: boolean - secretRef: - description: |- - secretRef is Optional: secretRef is reference to the secret object containing - sensitive information to pass to the plugin scripts. This may be - empty if no secret object is specified. If the secret object - contains more than one secret, all secrets are passed to the plugin - scripts. - properties: - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - type: object - x-kubernetes-map-type: atomic - required: - - driver - type: object - flocker: - description: - flocker represents a Flocker volume - attached to a kubelet's host machine. This depends - on the Flocker control service being running - properties: - datasetName: - description: |- - datasetName is Name of the dataset stored as metadata -> name on the dataset for Flocker - should be considered as deprecated - type: string - datasetUUID: - description: - datasetUUID is the UUID of the - dataset. This is unique identifier of a Flocker - dataset - type: string - type: object - gcePersistentDisk: - description: |- - gcePersistentDisk represents a GCE Disk resource that is attached to a - kubelet's host machine and then exposed to the pod. - More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk - properties: - fsType: - description: |- - fsType is filesystem type of the volume that you want to mount. - Tip: Ensure that the filesystem type is supported by the host operating system. - Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk - TODO: how do we prevent errors in the filesystem from compromising the machine - type: string - partition: - description: |- - partition is the partition in the volume that you want to mount. - If omitted, the default is to mount by volume name. - Examples: For volume /dev/sda1, you specify the partition as "1". - Similarly, the volume partition for /dev/sda is "0" (or you can leave the property empty). - More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk - format: int32 - type: integer - pdName: - description: |- - pdName is unique name of the PD resource in GCE. Used to identify the disk in GCE. - More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk - type: string - readOnly: - description: |- - readOnly here will force the ReadOnly setting in VolumeMounts. - Defaults to false. - More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk - type: boolean - required: - - pdName - type: object - gitRepo: - description: |- - gitRepo represents a git repository at a particular revision. - DEPRECATED: GitRepo is deprecated. To provision a container with a git repo, mount an - EmptyDir into an InitContainer that clones the repo using git, then mount the EmptyDir - into the Pod's container. - properties: - directory: - description: |- - directory is the target directory name. - Must not contain or start with '..'. If '.' is supplied, the volume directory will be the - git repository. Otherwise, if specified, the volume will contain the git repository in - the subdirectory with the given name. - type: string - repository: - description: repository is the URL - type: string - revision: - description: - revision is the commit hash for - the specified revision. - type: string - required: - - repository - type: object - glusterfs: - description: |- - glusterfs represents a Glusterfs mount on the host that shares a pod's lifetime. - More info: https://examples.k8s.io/volumes/glusterfs/README.md - properties: - endpoints: - description: |- - endpoints is the endpoint name that details Glusterfs topology. - More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod - type: string - path: - description: |- - path is the Glusterfs volume path. - More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod - type: string - readOnly: - description: |- - readOnly here will force the Glusterfs volume to be mounted with read-only permissions. - Defaults to false. - More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod - type: boolean - required: - - endpoints - - path - type: object - hostPath: - description: |- - hostPath represents a pre-existing file or directory on the host - machine that is directly exposed to the container. This is generally - used for system agents or other privileged things that are allowed - to see the host machine. Most containers will NOT need this. - More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath - --- - TODO(jonesdl) We need to restrict who can use host directory mounts and who can/can not - mount host directories as read/write. - properties: - path: - description: |- - path of the directory on the host. - If the path is a symlink, it will follow the link to the real path. - More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath - type: string - type: - description: |- - type for HostPath Volume - Defaults to "" - More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath - type: string - required: - - path - type: object - iscsi: - description: |- - iscsi represents an ISCSI Disk resource that is attached to a - kubelet's host machine and then exposed to the pod. - More info: https://examples.k8s.io/volumes/iscsi/README.md - properties: - chapAuthDiscovery: - description: - chapAuthDiscovery defines whether - support iSCSI Discovery CHAP authentication - type: boolean - chapAuthSession: - description: - chapAuthSession defines whether - support iSCSI Session CHAP authentication - type: boolean - fsType: - description: |- - fsType is the filesystem type of the volume that you want to mount. - Tip: Ensure that the filesystem type is supported by the host operating system. - Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - More info: https://kubernetes.io/docs/concepts/storage/volumes#iscsi - TODO: how do we prevent errors in the filesystem from compromising the machine - type: string - initiatorName: - description: |- - initiatorName is the custom iSCSI Initiator Name. - If initiatorName is specified with iscsiInterface simultaneously, new iSCSI interface - : will be created for the connection. - type: string - iqn: - description: - iqn is the target iSCSI Qualified - Name. - type: string - iscsiInterface: - description: |- - iscsiInterface is the interface Name that uses an iSCSI transport. - Defaults to 'default' (tcp). - type: string - lun: - description: - lun represents iSCSI Target Lun - number. - format: int32 - type: integer - portals: - description: |- - portals is the iSCSI Target Portal List. The portal is either an IP or ip_addr:port if the port - is other than default (typically TCP ports 860 and 3260). - items: - type: string - type: array - readOnly: - description: |- - readOnly here will force the ReadOnly setting in VolumeMounts. - Defaults to false. - type: boolean - secretRef: - description: - secretRef is the CHAP Secret for - iSCSI target and initiator authentication - properties: - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - type: object - x-kubernetes-map-type: atomic - targetPortal: - description: |- - targetPortal is iSCSI Target Portal. The Portal is either an IP or ip_addr:port if the port - is other than default (typically TCP ports 860 and 3260). - type: string - required: - - iqn - - lun - - targetPortal - type: object - name: - description: |- - name of the volume. - Must be a DNS_LABEL and unique within the pod. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - type: string - nfs: - description: |- - nfs represents an NFS mount on the host that shares a pod's lifetime - More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs - properties: - path: - description: |- - path that is exported by the NFS server. - More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs - type: string - readOnly: - description: |- - readOnly here will force the NFS export to be mounted with read-only permissions. - Defaults to false. - More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs - type: boolean - server: - description: |- - server is the hostname or IP address of the NFS server. - More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs - type: string - required: - - path - - server - type: object - persistentVolumeClaim: - description: |- - persistentVolumeClaimVolumeSource represents a reference to a - PersistentVolumeClaim in the same namespace. - More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims - properties: - claimName: - description: |- - claimName is the name of a PersistentVolumeClaim in the same namespace as the pod using this volume. - More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims - type: string - readOnly: - description: |- - readOnly Will force the ReadOnly setting in VolumeMounts. - Default false. - type: boolean - required: - - claimName - type: object - photonPersistentDisk: - description: - photonPersistentDisk represents a PhotonController - persistent disk attached and mounted on kubelets - host machine - properties: - fsType: - description: |- - fsType is the filesystem type to mount. - Must be a filesystem type supported by the host operating system. - Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - type: string - pdID: - description: - pdID is the ID that identifies - Photon Controller persistent disk - type: string - required: - - pdID - type: object - portworxVolume: - description: - portworxVolume represents a portworx - volume attached and mounted on kubelets host machine - properties: - fsType: - description: |- - fSType represents the filesystem type to mount - Must be a filesystem type supported by the host operating system. - Ex. "ext4", "xfs". Implicitly inferred to be "ext4" if unspecified. - type: string - readOnly: - description: |- - readOnly defaults to false (read/write). ReadOnly here will force - the ReadOnly setting in VolumeMounts. - type: boolean - volumeID: - description: - volumeID uniquely identifies a - Portworx volume - type: string - required: - - volumeID - type: object - projected: - description: - projected items for all in one resources - secrets, configmaps, and downward API - properties: - defaultMode: - description: |- - defaultMode are the mode bits used to set permissions on created files by default. - Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. - YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. - Directories within the path are not affected by this setting. - This might be in conflict with other options that affect the file - mode, like fsGroup, and the result can be other mode bits set. - format: int32 - type: integer - sources: - description: sources is the list of volume projections - items: - description: - Projection that may be projected - along with other supported volume types - properties: - clusterTrustBundle: - description: |- - ClusterTrustBundle allows a pod to access the `.spec.trustBundle` field - of ClusterTrustBundle objects in an auto-updating file. - - - Alpha, gated by the ClusterTrustBundleProjection feature gate. - - - ClusterTrustBundle objects can either be selected by name, or by the - combination of signer name and a label selector. - - - Kubelet performs aggressive normalization of the PEM contents written - into the pod filesystem. Esoteric PEM features such as inter-block - comments and block headers are stripped. Certificates are deduplicated. - The ordering of certificates within the file is arbitrary, and Kubelet - may change the order over time. - properties: - labelSelector: - description: |- - Select all ClusterTrustBundles that match this label selector. Only has - effect if signerName is set. Mutually-exclusive with name. If unset, - interpreted as "match nothing". If set but empty, interpreted as "match - everything". - properties: - matchExpressions: - description: - matchExpressions - is a list of label selector - requirements. The requirements - are ANDed. - items: - description: |- - A label selector requirement is a selector that contains values, a key, and an operator that - relates the key and values. - properties: - key: - description: - key is the - label key that the selector - applies to. - type: string - operator: - description: |- - operator represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists and DoesNotExist. - type: string - values: - description: |- - values is an array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. This array is replaced during a strategic - merge patch. - items: - type: string - type: array - required: - - key - - operator - type: object - type: array - matchLabels: - additionalProperties: - type: string - description: |- - matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels - map is equivalent to an element of matchExpressions, whose key field is "key", the - operator is "In", and the values array contains only "value". The requirements are ANDed. - type: object - type: object - x-kubernetes-map-type: atomic - name: - description: |- - Select a single ClusterTrustBundle by object name. Mutually-exclusive - with signerName and labelSelector. - type: string - optional: - description: |- - If true, don't block pod startup if the referenced ClusterTrustBundle(s) - aren't available. If using name, then the named ClusterTrustBundle is - allowed not to exist. If using signerName, then the combination of - signerName and labelSelector is allowed to match zero - ClusterTrustBundles. - type: boolean - path: - description: - Relative path from the - volume root to write the bundle. - type: string - signerName: - description: |- - Select all ClusterTrustBundles that match this signer name. - Mutually-exclusive with name. The contents of all selected - ClusterTrustBundles will be unified and deduplicated. - type: string - required: - - path - type: object - configMap: - description: - configMap information about - the configMap data to project - properties: - items: - description: |- - items if unspecified, each key-value pair in the Data field of the referenced - ConfigMap will be projected into the volume as a file whose name is the - key and content is the value. If specified, the listed keys will be - projected into the specified paths, and unlisted keys will not be - present. If a key is specified which is not present in the ConfigMap, - the volume setup will error unless it is marked optional. Paths must be - relative and may not contain the '..' path or start with '..'. - items: - description: - Maps a string key to - a path within a volume. - properties: - key: - description: - key is the key - to project. - type: string - mode: - description: |- - mode is Optional: mode bits used to set permissions on this file. - Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. - YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. - If not specified, the volume defaultMode will be used. - This might be in conflict with other options that affect the file - mode, like fsGroup, and the result can be other mode bits set. - format: int32 - type: integer - path: - description: |- - path is the relative path of the file to map the key to. - May not be an absolute path. - May not contain the path element '..'. - May not start with the string '..'. - type: string - required: - - key - - path - type: object - type: array - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - optional specify whether - the ConfigMap or its keys must be - defined - type: boolean - type: object - x-kubernetes-map-type: atomic - downwardAPI: - description: - downwardAPI information about - the downwardAPI data to project - properties: - items: - description: - Items is a list of DownwardAPIVolume - file - items: - description: - DownwardAPIVolumeFile - represents information to create - the file containing the pod field - properties: - fieldRef: - description: - "Required: Selects - a field of the pod: only annotations, - labels, name and namespace - are supported." - properties: - apiVersion: - description: - Version of - the schema the FieldPath - is written in terms of, - defaults to "v1". - type: string - fieldPath: - description: - Path of the - field to select in the - specified API version. - type: string - required: - - fieldPath - type: object - x-kubernetes-map-type: atomic - mode: - description: |- - Optional: mode bits used to set permissions on this file, must be an octal value - between 0000 and 0777 or a decimal value between 0 and 511. - YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. - If not specified, the volume defaultMode will be used. - This might be in conflict with other options that affect the file - mode, like fsGroup, and the result can be other mode bits set. - format: int32 - type: integer - path: - description: - "Required: Path - is the relative path name - of the file to be created. - Must not be absolute or contain - the '..' path. Must be utf-8 - encoded. The first item of - the relative path must not - start with '..'" - type: string - resourceFieldRef: - description: |- - Selects a resource of the container: only resources limits and requests - (limits.cpu, limits.memory, requests.cpu and requests.memory) are currently supported. - properties: - containerName: - description: - "Container - name: required for volumes, - optional for env vars" - type: string - divisor: - anyOf: - - type: integer - - type: string - description: - Specifies the - output format of the exposed - resources, defaults to - "1" - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ - x-kubernetes-int-or-string: true - resource: - description: - "Required: - resource to select" - type: string - required: - - resource - type: object - x-kubernetes-map-type: atomic - required: - - path - type: object - type: array - type: object - secret: - description: - secret information about - the secret data to project - properties: - items: - description: |- - items if unspecified, each key-value pair in the Data field of the referenced - Secret will be projected into the volume as a file whose name is the - key and content is the value. If specified, the listed keys will be - projected into the specified paths, and unlisted keys will not be - present. If a key is specified which is not present in the Secret, - the volume setup will error unless it is marked optional. Paths must be - relative and may not contain the '..' path or start with '..'. - items: - description: - Maps a string key to - a path within a volume. - properties: - key: - description: - key is the key - to project. - type: string - mode: - description: |- - mode is Optional: mode bits used to set permissions on this file. - Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. - YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. - If not specified, the volume defaultMode will be used. - This might be in conflict with other options that affect the file - mode, like fsGroup, and the result can be other mode bits set. - format: int32 - type: integer - path: - description: |- - path is the relative path of the file to map the key to. - May not be an absolute path. - May not contain the path element '..'. - May not start with the string '..'. - type: string - required: - - key - - path - type: object - type: array - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - optional field specify - whether the Secret or its key must - be defined - type: boolean - type: object - x-kubernetes-map-type: atomic - serviceAccountToken: - description: - serviceAccountToken is information - about the serviceAccountToken data to - project - properties: - audience: - description: |- - audience is the intended audience of the token. A recipient of a token - must identify itself with an identifier specified in the audience of the - token, and otherwise should reject the token. The audience defaults to the - identifier of the apiserver. - type: string - expirationSeconds: - description: |- - expirationSeconds is the requested duration of validity of the service - account token. As the token approaches expiration, the kubelet volume - plugin will proactively rotate the service account token. The kubelet will - start trying to rotate the token if the token is older than 80 percent of - its time to live or if the token is older than 24 hours.Defaults to 1 hour - and must be at least 10 minutes. - format: int64 - type: integer - path: - description: |- - path is the path relative to the mount point of the file to project the - token into. - type: string - required: - - path - type: object - type: object - type: array - type: object - quobyte: - description: - quobyte represents a Quobyte mount - on the host that shares a pod's lifetime - properties: - group: - description: |- - group to map volume access to - Default is no group - type: string - readOnly: - description: |- - readOnly here will force the Quobyte volume to be mounted with read-only permissions. - Defaults to false. - type: boolean - registry: - description: |- - registry represents a single or multiple Quobyte Registry services - specified as a string as host:port pair (multiple entries are separated with commas) - which acts as the central registry for volumes - type: string - tenant: - description: |- - tenant owning the given Quobyte volume in the Backend - Used with dynamically provisioned Quobyte volumes, value is set by the plugin - type: string - user: - description: |- - user to map volume access to - Defaults to serivceaccount user - type: string - volume: - description: - volume is a string that references - an already created Quobyte volume by name. - type: string - required: - - registry - - volume - type: object - rbd: - description: |- - rbd represents a Rados Block Device mount on the host that shares a pod's lifetime. - More info: https://examples.k8s.io/volumes/rbd/README.md - properties: - fsType: - description: |- - fsType is the filesystem type of the volume that you want to mount. - Tip: Ensure that the filesystem type is supported by the host operating system. - Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - More info: https://kubernetes.io/docs/concepts/storage/volumes#rbd - TODO: how do we prevent errors in the filesystem from compromising the machine - type: string - image: - description: |- - image is the rados image name. - More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it - type: string - keyring: - description: |- - keyring is the path to key ring for RBDUser. - Default is /etc/ceph/keyring. - More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it - type: string - monitors: - description: |- - monitors is a collection of Ceph monitors. - More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it - items: - type: string - type: array - pool: - description: |- - pool is the rados pool name. - Default is rbd. - More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it - type: string - readOnly: - description: |- - readOnly here will force the ReadOnly setting in VolumeMounts. - Defaults to false. - More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it - type: boolean - secretRef: - description: |- - secretRef is name of the authentication secret for RBDUser. If provided - overrides keyring. - Default is nil. - More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it - properties: - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - type: object - x-kubernetes-map-type: atomic - user: - description: |- - user is the rados user name. - Default is admin. - More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it - type: string - required: - - image - - monitors - type: object - scaleIO: - description: - scaleIO represents a ScaleIO persistent - volume attached and mounted on Kubernetes nodes. - properties: - fsType: - description: |- - fsType is the filesystem type to mount. - Must be a filesystem type supported by the host operating system. - Ex. "ext4", "xfs", "ntfs". - Default is "xfs". - type: string - gateway: - description: - gateway is the host address of - the ScaleIO API Gateway. - type: string - protectionDomain: - description: - protectionDomain is the name of - the ScaleIO Protection Domain for the configured - storage. - type: string - readOnly: - description: |- - readOnly Defaults to false (read/write). ReadOnly here will force - the ReadOnly setting in VolumeMounts. - type: boolean - secretRef: - description: |- - secretRef references to the secret for ScaleIO user and other - sensitive information. If this is not provided, Login operation will fail. - properties: - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - type: object - x-kubernetes-map-type: atomic - sslEnabled: - description: - sslEnabled Flag enable/disable - SSL communication with Gateway, default false - type: boolean - storageMode: - description: |- - storageMode indicates whether the storage for a volume should be ThickProvisioned or ThinProvisioned. - Default is ThinProvisioned. - type: string - storagePool: - description: - storagePool is the ScaleIO Storage - Pool associated with the protection domain. - type: string - system: - description: - system is the name of the storage - system as configured in ScaleIO. - type: string - volumeName: - description: |- - volumeName is the name of a volume already created in the ScaleIO system - that is associated with this volume source. - type: string - required: - - gateway - - secretRef - - system - type: object - secret: - description: |- - secret represents a secret that should populate this volume. - More info: https://kubernetes.io/docs/concepts/storage/volumes#secret - properties: - defaultMode: - description: |- - defaultMode is Optional: mode bits used to set permissions on created files by default. - Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. - YAML accepts both octal and decimal values, JSON requires decimal values - for mode bits. Defaults to 0644. - Directories within the path are not affected by this setting. - This might be in conflict with other options that affect the file - mode, like fsGroup, and the result can be other mode bits set. - format: int32 - type: integer - items: - description: |- - items If unspecified, each key-value pair in the Data field of the referenced - Secret will be projected into the volume as a file whose name is the - key and content is the value. If specified, the listed keys will be - projected into the specified paths, and unlisted keys will not be - present. If a key is specified which is not present in the Secret, - the volume setup will error unless it is marked optional. Paths must be - relative and may not contain the '..' path or start with '..'. - items: - description: - Maps a string key to a path within - a volume. - properties: - key: - description: key is the key to project. - type: string - mode: - description: |- - mode is Optional: mode bits used to set permissions on this file. - Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. - YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. - If not specified, the volume defaultMode will be used. - This might be in conflict with other options that affect the file - mode, like fsGroup, and the result can be other mode bits set. - format: int32 - type: integer - path: - description: |- - path is the relative path of the file to map the key to. - May not be an absolute path. - May not contain the path element '..'. - May not start with the string '..'. - type: string - required: - - key - - path - type: object - type: array - optional: - description: - optional field specify whether - the Secret or its keys must be defined - type: boolean - secretName: - description: |- - secretName is the name of the secret in the pod's namespace to use. - More info: https://kubernetes.io/docs/concepts/storage/volumes#secret - type: string - type: object - storageos: - description: - storageOS represents a StorageOS volume - attached and mounted on Kubernetes nodes. - properties: - fsType: - description: |- - fsType is the filesystem type to mount. - Must be a filesystem type supported by the host operating system. - Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - type: string - readOnly: - description: |- - readOnly defaults to false (read/write). ReadOnly here will force - the ReadOnly setting in VolumeMounts. - type: boolean - secretRef: - description: |- - secretRef specifies the secret to use for obtaining the StorageOS API - credentials. If not specified, default values will be attempted. - properties: - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - type: object - x-kubernetes-map-type: atomic - volumeName: - description: |- - volumeName is the human-readable name of the StorageOS volume. Volume - names are only unique within a namespace. - type: string - volumeNamespace: - description: |- - volumeNamespace specifies the scope of the volume within StorageOS. If no - namespace is specified then the Pod's namespace will be used. This allows the - Kubernetes name scoping to be mirrored within StorageOS for tighter integration. - Set VolumeName to any name to override the default behaviour. - Set to "default" if you are not using namespaces within StorageOS. - Namespaces that do not pre-exist within StorageOS will be created. - type: string - type: object - vsphereVolume: - description: - vsphereVolume represents a vSphere - volume attached and mounted on kubelets host machine - properties: - fsType: - description: |- - fsType is filesystem type to mount. - Must be a filesystem type supported by the host operating system. - Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - type: string - storagePolicyID: - description: - storagePolicyID is the storage - Policy Based Management (SPBM) profile ID - associated with the StoragePolicyName. - type: string - storagePolicyName: - description: - storagePolicyName is the storage - Policy Based Management (SPBM) profile name. - type: string - volumePath: - description: - volumePath is the path that identifies - vSphere volume vmdk - type: string - required: - - volumePath - type: object - required: - - name - type: object - type: array - required: - - containers - type: object - type: object - restartPolicy: - default: Default - description: - RestartPolicy defines the restart policy when pod - failures happen. - enum: - - Default - - RecreateGroupOnPodRestart - type: string - size: - default: 1 - description: |- - Number of pods to create. It is the total number of pods in each group. - The minimum is 1 which represent the leader. When set to 1, the leader - pod is created for each group as well as a 0-replica StatefulSet for the workers. - Default to 1. - format: int32 - type: integer - subGroupPolicy: - description: |- - SubGroupPolicy describes the policy that will be applied when creating subgroups - in each replica. - properties: - subGroupSize: - description: |- - The number of pods per subgroup. This value is immutable, - and must not be greater than LeaderWorkerSet.Spec.Size. - Size must be divisible by subGroupSize in which case the - subgroups will be of equal size. Or size - 1 is divisible - by subGroupSize, in which case the leader is considered as - the extra pod, and will be part of the first subgroup. - format: int32 - type: integer - type: object - workerTemplate: - description: - WorkerTemplate defines the pod template for worker - pods. - properties: - metadata: - description: |- - Standard object's metadata. - More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata - properties: - annotations: - additionalProperties: - type: string - type: object - finalizers: - items: - type: string - type: array - labels: - additionalProperties: - type: string - type: object - name: - type: string - namespace: - type: string - type: object - spec: - description: |- - Specification of the desired behavior of the pod. - More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status - properties: - activeDeadlineSeconds: - description: |- - Optional duration in seconds the pod may be active on the node relative to - StartTime before the system will actively try to mark it failed and kill associated containers. - Value must be a positive integer. - format: int64 - type: integer - affinity: - description: If specified, the pod's scheduling constraints - properties: - nodeAffinity: - description: - Describes node affinity scheduling rules - for the pod. - properties: - ? preferredDuringSchedulingIgnoredDuringExecution - : description: |- - The scheduler will prefer to schedule pods to nodes that satisfy - the affinity expressions specified by this field, but it may choose - a node that violates one or more of the expressions. The node that is - most preferred is the one with the greatest sum of weights, i.e. - for each node that meets all of the scheduling requirements (resource - request, requiredDuringScheduling affinity expressions, etc.), - compute a sum by iterating through the elements of this field and adding - "weight" to the sum if the node matches the corresponding matchExpressions; the - node(s) with the highest sum are the most preferred. - items: - description: |- - An empty preferred scheduling term matches all objects with implicit weight 0 - (i.e. it's a no-op). A null preferred scheduling term matches no objects (i.e. is also a no-op). - properties: - preference: - description: - A node selector term, associated - with the corresponding weight. - properties: - matchExpressions: - description: - A list of node selector - requirements by node's labels. - items: - description: |- - A node selector requirement is a selector that contains values, a key, and an operator - that relates the key and values. - properties: - key: - description: - The label key that - the selector applies to. - type: string - operator: - description: |- - Represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt. - type: string - values: - description: |- - An array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. If the operator is Gt or Lt, the values - array must have a single element, which will be interpreted as an integer. - This array is replaced during a strategic merge patch. - items: - type: string - type: array - required: - - key - - operator - type: object - type: array - matchFields: - description: - A list of node selector - requirements by node's fields. - items: - description: |- - A node selector requirement is a selector that contains values, a key, and an operator - that relates the key and values. - properties: - key: - description: - The label key that - the selector applies to. - type: string - operator: - description: |- - Represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt. - type: string - values: - description: |- - An array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. If the operator is Gt or Lt, the values - array must have a single element, which will be interpreted as an integer. - This array is replaced during a strategic merge patch. - items: - type: string - type: array - required: - - key - - operator - type: object - type: array - type: object - x-kubernetes-map-type: atomic - weight: - description: - Weight associated with matching - the corresponding nodeSelectorTerm, in - the range 1-100. - format: int32 - type: integer - required: - - preference - - weight - type: object - type: array - ? requiredDuringSchedulingIgnoredDuringExecution - : description: |- - If the affinity requirements specified by this field are not met at - scheduling time, the pod will not be scheduled onto the node. - If the affinity requirements specified by this field cease to be met - at some point during pod execution (e.g. due to an update), the system - may or may not try to eventually evict the pod from its node. - properties: - nodeSelectorTerms: - description: - Required. A list of node selector - terms. The terms are ORed. - items: - description: |- - A null or empty node selector term matches no objects. The requirements of - them are ANDed. - The TopologySelectorTerm type implements a subset of the NodeSelectorTerm. - properties: - matchExpressions: - description: - A list of node selector - requirements by node's labels. - items: - description: |- - A node selector requirement is a selector that contains values, a key, and an operator - that relates the key and values. - properties: - key: - description: - The label key that - the selector applies to. - type: string - operator: - description: |- - Represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt. - type: string - values: - description: |- - An array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. If the operator is Gt or Lt, the values - array must have a single element, which will be interpreted as an integer. - This array is replaced during a strategic merge patch. - items: - type: string - type: array - required: - - key - - operator - type: object - type: array - matchFields: - description: - A list of node selector - requirements by node's fields. - items: - description: |- - A node selector requirement is a selector that contains values, a key, and an operator - that relates the key and values. - properties: - key: - description: - The label key that - the selector applies to. - type: string - operator: - description: |- - Represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt. - type: string - values: - description: |- - An array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. If the operator is Gt or Lt, the values - array must have a single element, which will be interpreted as an integer. - This array is replaced during a strategic merge patch. - items: - type: string - type: array - required: - - key - - operator - type: object - type: array - type: object - x-kubernetes-map-type: atomic - type: array - required: - - nodeSelectorTerms - type: object - x-kubernetes-map-type: atomic - type: object - podAffinity: - description: - Describes pod affinity scheduling rules - (e.g. co-locate this pod in the same node, zone, - etc. as some other pod(s)). - properties: - ? preferredDuringSchedulingIgnoredDuringExecution - : description: |- - The scheduler will prefer to schedule pods to nodes that satisfy - the affinity expressions specified by this field, but it may choose - a node that violates one or more of the expressions. The node that is - most preferred is the one with the greatest sum of weights, i.e. - for each node that meets all of the scheduling requirements (resource - request, requiredDuringScheduling affinity expressions, etc.), - compute a sum by iterating through the elements of this field and adding - "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the - node(s) with the highest sum are the most preferred. - items: - description: - The weights of all of the matched - WeightedPodAffinityTerm fields are added per-node - to find the most preferred node(s) - properties: - podAffinityTerm: - description: - Required. A pod affinity term, - associated with the corresponding weight. - properties: - labelSelector: - description: |- - A label query over a set of resources, in this case pods. - If it's null, this PodAffinityTerm matches with no Pods. - properties: - matchExpressions: - description: - matchExpressions is - a list of label selector requirements. - The requirements are ANDed. - items: - description: |- - A label selector requirement is a selector that contains values, a key, and an operator that - relates the key and values. - properties: - key: - description: - key is the label - key that the selector applies - to. - type: string - operator: - description: |- - operator represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists and DoesNotExist. - type: string - values: - description: |- - values is an array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. This array is replaced during a strategic - merge patch. - items: - type: string - type: array - required: - - key - - operator - type: object - type: array - matchLabels: - additionalProperties: - type: string - description: |- - matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels - map is equivalent to an element of matchExpressions, whose key field is "key", the - operator is "In", and the values array contains only "value". The requirements are ANDed. - type: object - type: object - x-kubernetes-map-type: atomic - matchLabelKeys: - description: |- - MatchLabelKeys is a set of pod label keys to select which pods will - be taken into consideration. The keys are used to lookup values from the - incoming pod labels, those key-value labels are merged with `LabelSelector` as `key in (value)` - to select the group of existing pods which pods will be taken into consideration - for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming - pod labels will be ignored. The default value is empty. - The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. - Also, MatchLabelKeys cannot be set when LabelSelector isn't set. - This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. - items: - type: string - type: array - x-kubernetes-list-type: atomic - mismatchLabelKeys: - description: |- - MismatchLabelKeys is a set of pod label keys to select which pods will - be taken into consideration. The keys are used to lookup values from the - incoming pod labels, those key-value labels are merged with `LabelSelector` as `key notin (value)` - to select the group of existing pods which pods will be taken into consideration - for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming - pod labels will be ignored. The default value is empty. - The same key is forbidden to exist in both MismatchLabelKeys and LabelSelector. - Also, MismatchLabelKeys cannot be set when LabelSelector isn't set. - This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. - items: - type: string - type: array - x-kubernetes-list-type: atomic - namespaceSelector: - description: |- - A label query over the set of namespaces that the term applies to. - The term is applied to the union of the namespaces selected by this field - and the ones listed in the namespaces field. - null selector and null or empty namespaces list means "this pod's namespace". - An empty selector ({}) matches all namespaces. - properties: - matchExpressions: - description: - matchExpressions is - a list of label selector requirements. - The requirements are ANDed. - items: - description: |- - A label selector requirement is a selector that contains values, a key, and an operator that - relates the key and values. - properties: - key: - description: - key is the label - key that the selector applies - to. - type: string - operator: - description: |- - operator represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists and DoesNotExist. - type: string - values: - description: |- - values is an array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. This array is replaced during a strategic - merge patch. - items: - type: string - type: array - required: - - key - - operator - type: object - type: array - matchLabels: - additionalProperties: - type: string - description: |- - matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels - map is equivalent to an element of matchExpressions, whose key field is "key", the - operator is "In", and the values array contains only "value". The requirements are ANDed. - type: object - type: object - x-kubernetes-map-type: atomic - namespaces: - description: |- - namespaces specifies a static list of namespace names that the term applies to. - The term is applied to the union of the namespaces listed in this field - and the ones selected by namespaceSelector. - null or empty namespaces list and null namespaceSelector means "this pod's namespace". - items: - type: string - type: array - topologyKey: - description: |- - This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching - the labelSelector in the specified namespaces, where co-located is defined as running on a node - whose value of the label with key topologyKey matches that of any node on which any of the - selected pods is running. - Empty topologyKey is not allowed. - type: string - required: - - topologyKey - type: object - weight: - description: |- - weight associated with matching the corresponding podAffinityTerm, - in the range 1-100. - format: int32 - type: integer - required: - - podAffinityTerm - - weight - type: object - type: array - ? requiredDuringSchedulingIgnoredDuringExecution - : description: |- - If the affinity requirements specified by this field are not met at - scheduling time, the pod will not be scheduled onto the node. - If the affinity requirements specified by this field cease to be met - at some point during pod execution (e.g. due to a pod label update), the - system may or may not try to eventually evict the pod from its node. - When there are multiple elements, the lists of nodes corresponding to each - podAffinityTerm are intersected, i.e. all terms must be satisfied. - items: - description: |- - Defines a set of pods (namely those matching the labelSelector - relative to the given namespace(s)) that this pod should be - co-located (affinity) or not co-located (anti-affinity) with, - where co-located is defined as running on a node whose value of - the label with key matches that of any node on which - a pod of the set of pods is running - properties: - labelSelector: - description: |- - A label query over a set of resources, in this case pods. - If it's null, this PodAffinityTerm matches with no Pods. - properties: - matchExpressions: - description: - matchExpressions is a list - of label selector requirements. The - requirements are ANDed. - items: + type: array + matchLabels: + additionalProperties: + type: string description: |- - A label selector requirement is a selector that contains values, a key, and an operator that - relates the key and values. - properties: - key: - description: - key is the label - key that the selector applies - to. - type: string - operator: - description: |- - operator represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists and DoesNotExist. - type: string - values: - description: |- - values is an array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. This array is replaced during a strategic - merge patch. - items: - type: string - type: array - required: - - key - - operator + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. type: object - type: array - matchLabels: - additionalProperties: - type: string - description: |- - matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels - map is equivalent to an element of matchExpressions, whose key field is "key", the - operator is "In", and the values array contains only "value". The requirements are ANDed. - type: object - type: object - x-kubernetes-map-type: atomic - matchLabelKeys: - description: |- - MatchLabelKeys is a set of pod label keys to select which pods will - be taken into consideration. The keys are used to lookup values from the - incoming pod labels, those key-value labels are merged with `LabelSelector` as `key in (value)` - to select the group of existing pods which pods will be taken into consideration - for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming - pod labels will be ignored. The default value is empty. - The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. - Also, MatchLabelKeys cannot be set when LabelSelector isn't set. - This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. - items: + type: object + x-kubernetes-map-type: atomic + storageClassName: + description: |- + storageClassName is the name of the StorageClass required by the claim. + More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1 type: string - type: array - x-kubernetes-list-type: atomic - mismatchLabelKeys: - description: |- - MismatchLabelKeys is a set of pod label keys to select which pods will - be taken into consideration. The keys are used to lookup values from the - incoming pod labels, those key-value labels are merged with `LabelSelector` as `key notin (value)` - to select the group of existing pods which pods will be taken into consideration - for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming - pod labels will be ignored. The default value is empty. - The same key is forbidden to exist in both MismatchLabelKeys and LabelSelector. - Also, MismatchLabelKeys cannot be set when LabelSelector isn't set. - This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. - items: + volumeAttributesClassName: + description: |- + volumeAttributesClassName may be used to set the VolumeAttributesClass used by this claim. + If specified, the CSI driver will create or update the volume with the attributes defined + in the corresponding VolumeAttributesClass. This has a different purpose than storageClassName, + it can be changed after the claim is created. An empty string value means that no VolumeAttributesClass + will be applied to the claim but it's not allowed to reset this field to empty string once it is set. + If unspecified and the PersistentVolumeClaim is unbound, the default VolumeAttributesClass + will be set by the persistentvolume controller if it exists. + If the resource referred to by volumeAttributesClass does not exist, this PersistentVolumeClaim will be + set to a Pending state, as reflected by the modifyVolumeStatus field, until such as a resource + exists. + More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#volumeattributesclass + (Alpha) Using this field requires the VolumeAttributesClass feature gate to be enabled. type: string - type: array - x-kubernetes-list-type: atomic - namespaceSelector: - description: |- - A label query over the set of namespaces that the term applies to. - The term is applied to the union of the namespaces selected by this field - and the ones listed in the namespaces field. - null selector and null or empty namespaces list means "this pod's namespace". - An empty selector ({}) matches all namespaces. - properties: - matchExpressions: - description: - matchExpressions is a list - of label selector requirements. The - requirements are ANDed. - items: - description: |- - A label selector requirement is a selector that contains values, a key, and an operator that - relates the key and values. - properties: - key: - description: - key is the label - key that the selector applies - to. - type: string - operator: - description: |- - operator represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists and DoesNotExist. - type: string - values: - description: |- - values is an array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. This array is replaced during a strategic - merge patch. - items: - type: string - type: array - required: - - key - - operator - type: object - type: array - matchLabels: - additionalProperties: - type: string - description: |- - matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels - map is equivalent to an element of matchExpressions, whose key field is "key", the - operator is "In", and the values array contains only "value". The requirements are ANDed. - type: object - type: object - x-kubernetes-map-type: atomic - namespaces: - description: |- - namespaces specifies a static list of namespace names that the term applies to. - The term is applied to the union of the namespaces listed in this field - and the ones selected by namespaceSelector. - null or empty namespaces list and null namespaceSelector means "this pod's namespace". - items: + volumeMode: + description: |- + volumeMode defines what type of volume is required by the claim. + Value of Filesystem is implied when not included in claim spec. type: string - type: array - topologyKey: - description: |- - This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching - the labelSelector in the specified namespaces, where co-located is defined as running on a node - whose value of the label with key topologyKey matches that of any node on which any of the - selected pods is running. - Empty topologyKey is not allowed. - type: string - required: - - topologyKey - type: object + volumeName: + description: volumeName is the binding + reference to the PersistentVolume + backing this claim. + type: string + type: object + required: + - spec + type: object + type: object + fc: + description: fc represents a Fibre Channel resource + that is attached to a kubelet's host machine and + then exposed to the pod. + properties: + fsType: + description: |- + fsType is the filesystem type to mount. + Must be a filesystem type supported by the host operating system. + Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. + TODO: how do we prevent errors in the filesystem from compromising the machine + type: string + lun: + description: 'lun is Optional: FC target lun + number' + format: int32 + type: integer + readOnly: + description: |- + readOnly is Optional: Defaults to false (read/write). ReadOnly here will force + the ReadOnly setting in VolumeMounts. + type: boolean + targetWWNs: + description: 'targetWWNs is Optional: FC target + worldwide names (WWNs)' + items: + type: string + type: array + wwids: + description: |- + wwids Optional: FC volume world wide identifiers (wwids) + Either wwids or combination of targetWWNs and lun must be set, but not both simultaneously. + items: + type: string + type: array + type: object + flexVolume: + description: |- + flexVolume represents a generic volume resource that is + provisioned/attached using an exec based plugin. + properties: + driver: + description: driver is the name of the driver + to use for this volume. + type: string + fsType: + description: |- + fsType is the filesystem type to mount. + Must be a filesystem type supported by the host operating system. + Ex. "ext4", "xfs", "ntfs". The default filesystem depends on FlexVolume script. + type: string + options: + additionalProperties: + type: string + description: 'options is Optional: this field + holds extra command options if any.' + type: object + readOnly: + description: |- + readOnly is Optional: defaults to false (read/write). ReadOnly here will force + the ReadOnly setting in VolumeMounts. + type: boolean + secretRef: + description: |- + secretRef is Optional: secretRef is reference to the secret object containing + sensitive information to pass to the plugin scripts. This may be + empty if no secret object is specified. If the secret object + contains more than one secret, all secrets are passed to the plugin + scripts. + properties: + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + type: object + x-kubernetes-map-type: atomic + required: + - driver + type: object + flocker: + description: flocker represents a Flocker volume + attached to a kubelet's host machine. This depends + on the Flocker control service being running + properties: + datasetName: + description: |- + datasetName is Name of the dataset stored as metadata -> name on the dataset for Flocker + should be considered as deprecated + type: string + datasetUUID: + description: datasetUUID is the UUID of the + dataset. This is unique identifier of a Flocker + dataset + type: string + type: object + gcePersistentDisk: + description: |- + gcePersistentDisk represents a GCE Disk resource that is attached to a + kubelet's host machine and then exposed to the pod. + More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk + properties: + fsType: + description: |- + fsType is filesystem type of the volume that you want to mount. + Tip: Ensure that the filesystem type is supported by the host operating system. + Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. + More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk + TODO: how do we prevent errors in the filesystem from compromising the machine + type: string + partition: + description: |- + partition is the partition in the volume that you want to mount. + If omitted, the default is to mount by volume name. + Examples: For volume /dev/sda1, you specify the partition as "1". + Similarly, the volume partition for /dev/sda is "0" (or you can leave the property empty). + More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk + format: int32 + type: integer + pdName: + description: |- + pdName is unique name of the PD resource in GCE. Used to identify the disk in GCE. + More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk + type: string + readOnly: + description: |- + readOnly here will force the ReadOnly setting in VolumeMounts. + Defaults to false. + More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk + type: boolean + required: + - pdName + type: object + gitRepo: + description: |- + gitRepo represents a git repository at a particular revision. + DEPRECATED: GitRepo is deprecated. To provision a container with a git repo, mount an + EmptyDir into an InitContainer that clones the repo using git, then mount the EmptyDir + into the Pod's container. + properties: + directory: + description: |- + directory is the target directory name. + Must not contain or start with '..'. If '.' is supplied, the volume directory will be the + git repository. Otherwise, if specified, the volume will contain the git repository in + the subdirectory with the given name. + type: string + repository: + description: repository is the URL + type: string + revision: + description: revision is the commit hash for + the specified revision. + type: string + required: + - repository + type: object + glusterfs: + description: |- + glusterfs represents a Glusterfs mount on the host that shares a pod's lifetime. + More info: https://examples.k8s.io/volumes/glusterfs/README.md + properties: + endpoints: + description: |- + endpoints is the endpoint name that details Glusterfs topology. + More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod + type: string + path: + description: |- + path is the Glusterfs volume path. + More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod + type: string + readOnly: + description: |- + readOnly here will force the Glusterfs volume to be mounted with read-only permissions. + Defaults to false. + More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod + type: boolean + required: + - endpoints + - path + type: object + hostPath: + description: |- + hostPath represents a pre-existing file or directory on the host + machine that is directly exposed to the container. This is generally + used for system agents or other privileged things that are allowed + to see the host machine. Most containers will NOT need this. + More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath + --- + TODO(jonesdl) We need to restrict who can use host directory mounts and who can/can not + mount host directories as read/write. + properties: + path: + description: |- + path of the directory on the host. + If the path is a symlink, it will follow the link to the real path. + More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath + type: string + type: + description: |- + type for HostPath Volume + Defaults to "" + More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath + type: string + required: + - path + type: object + iscsi: + description: |- + iscsi represents an ISCSI Disk resource that is attached to a + kubelet's host machine and then exposed to the pod. + More info: https://examples.k8s.io/volumes/iscsi/README.md + properties: + chapAuthDiscovery: + description: chapAuthDiscovery defines whether + support iSCSI Discovery CHAP authentication + type: boolean + chapAuthSession: + description: chapAuthSession defines whether + support iSCSI Session CHAP authentication + type: boolean + fsType: + description: |- + fsType is the filesystem type of the volume that you want to mount. + Tip: Ensure that the filesystem type is supported by the host operating system. + Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. + More info: https://kubernetes.io/docs/concepts/storage/volumes#iscsi + TODO: how do we prevent errors in the filesystem from compromising the machine + type: string + initiatorName: + description: |- + initiatorName is the custom iSCSI Initiator Name. + If initiatorName is specified with iscsiInterface simultaneously, new iSCSI interface + : will be created for the connection. + type: string + iqn: + description: iqn is the target iSCSI Qualified + Name. + type: string + iscsiInterface: + description: |- + iscsiInterface is the interface Name that uses an iSCSI transport. + Defaults to 'default' (tcp). + type: string + lun: + description: lun represents iSCSI Target Lun + number. + format: int32 + type: integer + portals: + description: |- + portals is the iSCSI Target Portal List. The portal is either an IP or ip_addr:port if the port + is other than default (typically TCP ports 860 and 3260). + items: + type: string type: array + readOnly: + description: |- + readOnly here will force the ReadOnly setting in VolumeMounts. + Defaults to false. + type: boolean + secretRef: + description: secretRef is the CHAP Secret for + iSCSI target and initiator authentication + properties: + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + type: object + x-kubernetes-map-type: atomic + targetPortal: + description: |- + targetPortal is iSCSI Target Portal. The Portal is either an IP or ip_addr:port if the port + is other than default (typically TCP ports 860 and 3260). + type: string + required: + - iqn + - lun + - targetPortal + type: object + name: + description: |- + name of the volume. + Must be a DNS_LABEL and unique within the pod. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + nfs: + description: |- + nfs represents an NFS mount on the host that shares a pod's lifetime + More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs + properties: + path: + description: |- + path that is exported by the NFS server. + More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs + type: string + readOnly: + description: |- + readOnly here will force the NFS export to be mounted with read-only permissions. + Defaults to false. + More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs + type: boolean + server: + description: |- + server is the hostname or IP address of the NFS server. + More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs + type: string + required: + - path + - server + type: object + persistentVolumeClaim: + description: |- + persistentVolumeClaimVolumeSource represents a reference to a + PersistentVolumeClaim in the same namespace. + More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims + properties: + claimName: + description: |- + claimName is the name of a PersistentVolumeClaim in the same namespace as the pod using this volume. + More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims + type: string + readOnly: + description: |- + readOnly Will force the ReadOnly setting in VolumeMounts. + Default false. + type: boolean + required: + - claimName type: object - podAntiAffinity: - description: - Describes pod anti-affinity scheduling - rules (e.g. avoid putting this pod in the same node, - zone, etc. as some other pod(s)). + photonPersistentDisk: + description: photonPersistentDisk represents a PhotonController + persistent disk attached and mounted on kubelets + host machine properties: - ? preferredDuringSchedulingIgnoredDuringExecution - : description: |- - The scheduler will prefer to schedule pods to nodes that satisfy - the anti-affinity expressions specified by this field, but it may choose - a node that violates one or more of the expressions. The node that is - most preferred is the one with the greatest sum of weights, i.e. - for each node that meets all of the scheduling requirements (resource - request, requiredDuringScheduling anti-affinity expressions, etc.), - compute a sum by iterating through the elements of this field and adding - "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the - node(s) with the highest sum are the most preferred. + fsType: + description: |- + fsType is the filesystem type to mount. + Must be a filesystem type supported by the host operating system. + Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. + type: string + pdID: + description: pdID is the ID that identifies + Photon Controller persistent disk + type: string + required: + - pdID + type: object + portworxVolume: + description: portworxVolume represents a portworx + volume attached and mounted on kubelets host machine + properties: + fsType: + description: |- + fSType represents the filesystem type to mount + Must be a filesystem type supported by the host operating system. + Ex. "ext4", "xfs". Implicitly inferred to be "ext4" if unspecified. + type: string + readOnly: + description: |- + readOnly defaults to false (read/write). ReadOnly here will force + the ReadOnly setting in VolumeMounts. + type: boolean + volumeID: + description: volumeID uniquely identifies a + Portworx volume + type: string + required: + - volumeID + type: object + projected: + description: projected items for all in one resources + secrets, configmaps, and downward API + properties: + defaultMode: + description: |- + defaultMode are the mode bits used to set permissions on created files by default. + Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. + YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. + Directories within the path are not affected by this setting. + This might be in conflict with other options that affect the file + mode, like fsGroup, and the result can be other mode bits set. + format: int32 + type: integer + sources: + description: sources is the list of volume projections items: - description: - The weights of all of the matched - WeightedPodAffinityTerm fields are added per-node - to find the most preferred node(s) + description: Projection that may be projected + along with other supported volume types properties: - podAffinityTerm: - description: - Required. A pod affinity term, - associated with the corresponding weight. + clusterTrustBundle: + description: |- + ClusterTrustBundle allows a pod to access the `.spec.trustBundle` field + of ClusterTrustBundle objects in an auto-updating file. + + + Alpha, gated by the ClusterTrustBundleProjection feature gate. + + + ClusterTrustBundle objects can either be selected by name, or by the + combination of signer name and a label selector. + + + Kubelet performs aggressive normalization of the PEM contents written + into the pod filesystem. Esoteric PEM features such as inter-block + comments and block headers are stripped. Certificates are deduplicated. + The ordering of certificates within the file is arbitrary, and Kubelet + may change the order over time. properties: labelSelector: description: |- - A label query over a set of resources, in this case pods. - If it's null, this PodAffinityTerm matches with no Pods. - properties: - matchExpressions: - description: - matchExpressions is - a list of label selector requirements. - The requirements are ANDed. - items: - description: |- - A label selector requirement is a selector that contains values, a key, and an operator that - relates the key and values. - properties: - key: - description: - key is the label - key that the selector applies - to. - type: string - operator: - description: |- - operator represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists and DoesNotExist. - type: string - values: - description: |- - values is an array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. This array is replaced during a strategic - merge patch. - items: - type: string - type: array - required: - - key - - operator - type: object - type: array - matchLabels: - additionalProperties: - type: string - description: |- - matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels - map is equivalent to an element of matchExpressions, whose key field is "key", the - operator is "In", and the values array contains only "value". The requirements are ANDed. - type: object - type: object - x-kubernetes-map-type: atomic - matchLabelKeys: - description: |- - MatchLabelKeys is a set of pod label keys to select which pods will - be taken into consideration. The keys are used to lookup values from the - incoming pod labels, those key-value labels are merged with `LabelSelector` as `key in (value)` - to select the group of existing pods which pods will be taken into consideration - for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming - pod labels will be ignored. The default value is empty. - The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. - Also, MatchLabelKeys cannot be set when LabelSelector isn't set. - This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. - items: - type: string - type: array - x-kubernetes-list-type: atomic - mismatchLabelKeys: - description: |- - MismatchLabelKeys is a set of pod label keys to select which pods will - be taken into consideration. The keys are used to lookup values from the - incoming pod labels, those key-value labels are merged with `LabelSelector` as `key notin (value)` - to select the group of existing pods which pods will be taken into consideration - for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming - pod labels will be ignored. The default value is empty. - The same key is forbidden to exist in both MismatchLabelKeys and LabelSelector. - Also, MismatchLabelKeys cannot be set when LabelSelector isn't set. - This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. - items: - type: string - type: array - x-kubernetes-list-type: atomic - namespaceSelector: - description: |- - A label query over the set of namespaces that the term applies to. - The term is applied to the union of the namespaces selected by this field - and the ones listed in the namespaces field. - null selector and null or empty namespaces list means "this pod's namespace". - An empty selector ({}) matches all namespaces. + Select all ClusterTrustBundles that match this label selector. Only has + effect if signerName is set. Mutually-exclusive with name. If unset, + interpreted as "match nothing". If set but empty, interpreted as "match + everything". properties: matchExpressions: - description: - matchExpressions is - a list of label selector requirements. - The requirements are ANDed. + description: matchExpressions + is a list of label selector + requirements. The requirements + are ANDed. items: description: |- A label selector requirement is a selector that contains values, a key, and an operator that relates the key and values. properties: key: - description: - key is the label - key that the selector applies - to. + description: key is the + label key that the selector + applies to. type: string operator: description: |- @@ -8808,8 +7064,8 @@ spec: type: string type: array required: - - key - - operator + - key + - operator type: object type: array matchLabels: @@ -8822,7386 +7078,8380 @@ spec: type: object type: object x-kubernetes-map-type: atomic - namespaces: - description: |- - namespaces specifies a static list of namespace names that the term applies to. - The term is applied to the union of the namespaces listed in this field - and the ones selected by namespaceSelector. - null or empty namespaces list and null namespaceSelector means "this pod's namespace". - items: - type: string - type: array - topologyKey: + name: description: |- - This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching - the labelSelector in the specified namespaces, where co-located is defined as running on a node - whose value of the label with key topologyKey matches that of any node on which any of the - selected pods is running. - Empty topologyKey is not allowed. + Select a single ClusterTrustBundle by object name. Mutually-exclusive + with signerName and labelSelector. type: string - required: - - topologyKey - type: object - weight: - description: |- - weight associated with matching the corresponding podAffinityTerm, - in the range 1-100. - format: int32 - type: integer - required: - - podAffinityTerm - - weight - type: object - type: array - ? requiredDuringSchedulingIgnoredDuringExecution - : description: |- - If the anti-affinity requirements specified by this field are not met at - scheduling time, the pod will not be scheduled onto the node. - If the anti-affinity requirements specified by this field cease to be met - at some point during pod execution (e.g. due to a pod label update), the - system may or may not try to eventually evict the pod from its node. - When there are multiple elements, the lists of nodes corresponding to each - podAffinityTerm are intersected, i.e. all terms must be satisfied. - items: - description: |- - Defines a set of pods (namely those matching the labelSelector - relative to the given namespace(s)) that this pod should be - co-located (affinity) or not co-located (anti-affinity) with, - where co-located is defined as running on a node whose value of - the label with key matches that of any node on which - a pod of the set of pods is running - properties: - labelSelector: - description: |- - A label query over a set of resources, in this case pods. - If it's null, this PodAffinityTerm matches with no Pods. - properties: - matchExpressions: - description: - matchExpressions is a list - of label selector requirements. The - requirements are ANDed. - items: - description: |- - A label selector requirement is a selector that contains values, a key, and an operator that - relates the key and values. - properties: - key: - description: - key is the label - key that the selector applies - to. - type: string - operator: - description: |- - operator represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists and DoesNotExist. - type: string - values: - description: |- - values is an array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. This array is replaced during a strategic - merge patch. - items: - type: string - type: array - required: - - key - - operator - type: object - type: array - matchLabels: - additionalProperties: - type: string - description: |- - matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels - map is equivalent to an element of matchExpressions, whose key field is "key", the - operator is "In", and the values array contains only "value". The requirements are ANDed. - type: object - type: object - x-kubernetes-map-type: atomic - matchLabelKeys: - description: |- - MatchLabelKeys is a set of pod label keys to select which pods will - be taken into consideration. The keys are used to lookup values from the - incoming pod labels, those key-value labels are merged with `LabelSelector` as `key in (value)` - to select the group of existing pods which pods will be taken into consideration - for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming - pod labels will be ignored. The default value is empty. - The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. - Also, MatchLabelKeys cannot be set when LabelSelector isn't set. - This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. - items: - type: string - type: array - x-kubernetes-list-type: atomic - mismatchLabelKeys: - description: |- - MismatchLabelKeys is a set of pod label keys to select which pods will - be taken into consideration. The keys are used to lookup values from the - incoming pod labels, those key-value labels are merged with `LabelSelector` as `key notin (value)` - to select the group of existing pods which pods will be taken into consideration - for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming - pod labels will be ignored. The default value is empty. - The same key is forbidden to exist in both MismatchLabelKeys and LabelSelector. - Also, MismatchLabelKeys cannot be set when LabelSelector isn't set. - This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. - items: - type: string - type: array - x-kubernetes-list-type: atomic - namespaceSelector: - description: |- - A label query over the set of namespaces that the term applies to. - The term is applied to the union of the namespaces selected by this field - and the ones listed in the namespaces field. - null selector and null or empty namespaces list means "this pod's namespace". - An empty selector ({}) matches all namespaces. - properties: - matchExpressions: - description: - matchExpressions is a list - of label selector requirements. The - requirements are ANDed. - items: - description: |- - A label selector requirement is a selector that contains values, a key, and an operator that - relates the key and values. - properties: - key: - description: - key is the label - key that the selector applies - to. - type: string - operator: - description: |- - operator represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists and DoesNotExist. - type: string - values: - description: |- - values is an array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. This array is replaced during a strategic - merge patch. - items: - type: string - type: array - required: - - key - - operator - type: object - type: array - matchLabels: - additionalProperties: - type: string - description: |- - matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels - map is equivalent to an element of matchExpressions, whose key field is "key", the - operator is "In", and the values array contains only "value". The requirements are ANDed. - type: object - type: object - x-kubernetes-map-type: atomic - namespaces: - description: |- - namespaces specifies a static list of namespace names that the term applies to. - The term is applied to the union of the namespaces listed in this field - and the ones selected by namespaceSelector. - null or empty namespaces list and null namespaceSelector means "this pod's namespace". - items: - type: string - type: array - topologyKey: - description: |- - This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching - the labelSelector in the specified namespaces, where co-located is defined as running on a node - whose value of the label with key topologyKey matches that of any node on which any of the - selected pods is running. - Empty topologyKey is not allowed. - type: string - required: - - topologyKey - type: object - type: array - type: object - type: object - automountServiceAccountToken: - description: - AutomountServiceAccountToken indicates whether - a service account token should be automatically mounted. - type: boolean - containers: - description: |- - List of containers belonging to the pod. - Containers cannot currently be added or removed. - There must be at least one container in a Pod. - Cannot be updated. - items: - description: - A single application container that you - want to run within a pod. - properties: - args: - description: |- - Arguments to the entrypoint. - The container image's CMD is used if this is not provided. - Variable references $(VAR_NAME) are expanded using the container's environment. If a variable - cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced - to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will - produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless - of whether the variable exists or not. Cannot be updated. - More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell - items: - type: string - type: array - command: - description: |- - Entrypoint array. Not executed within a shell. - The container image's ENTRYPOINT is used if this is not provided. - Variable references $(VAR_NAME) are expanded using the container's environment. If a variable - cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced - to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will - produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless - of whether the variable exists or not. Cannot be updated. - More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell - items: - type: string - type: array - env: - description: |- - List of environment variables to set in the container. - Cannot be updated. - items: - description: - EnvVar represents an environment - variable present in a Container. - properties: - name: - description: - Name of the environment variable. - Must be a C_IDENTIFIER. - type: string - value: - description: |- - Variable references $(VAR_NAME) are expanded - using the previously defined environment variables in the container and - any service environment variables. If a variable cannot be resolved, - the reference in the input string will be unchanged. Double $$ are reduced - to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. - "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". - Escaped references will never be expanded, regardless of whether the variable - exists or not. - Defaults to "". - type: string - valueFrom: - description: - Source for the environment variable's - value. Cannot be used if value is not empty. - properties: - configMapKeyRef: - description: Selects a key of a ConfigMap. - properties: - key: - description: The key to select. - type: string - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - Specify whether the ConfigMap - or its key must be defined - type: boolean - required: - - key - type: object - x-kubernetes-map-type: atomic - fieldRef: - description: |- - Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['']`, `metadata.annotations['']`, - spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs. - properties: - apiVersion: - description: - Version of the schema - the FieldPath is written in terms - of, defaults to "v1". - type: string - fieldPath: - description: - Path of the field to - select in the specified API version. - type: string - required: - - fieldPath - type: object - x-kubernetes-map-type: atomic - resourceFieldRef: - description: |- - Selects a resource of the container: only resources limits and requests - (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported. - properties: - containerName: - description: - "Container name: required - for volumes, optional for env vars" - type: string - divisor: - anyOf: - - type: integer - - type: string - description: - Specifies the output - format of the exposed resources, - defaults to "1" - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ - x-kubernetes-int-or-string: true - resource: - description: - "Required: resource to - select" - type: string - required: - - resource - type: object - x-kubernetes-map-type: atomic - secretKeyRef: - description: - Selects a key of a secret - in the pod's namespace - properties: - key: - description: - The key of the secret - to select from. Must be a valid - secret key. - type: string - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - Specify whether the Secret - or its key must be defined - type: boolean - required: - - key - type: object - x-kubernetes-map-type: atomic - type: object - required: - - name - type: object - type: array - envFrom: - description: |- - List of sources to populate environment variables in the container. - The keys defined within a source must be a C_IDENTIFIER. All invalid keys - will be reported as an event when the container is starting. When a key exists in multiple - sources, the value associated with the last source will take precedence. - Values defined by an Env with a duplicate key will take precedence. - Cannot be updated. - items: - description: - EnvFromSource represents the source - of a set of ConfigMaps - properties: - configMapRef: - description: The ConfigMap to select from - properties: - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - Specify whether the ConfigMap - must be defined - type: boolean - type: object - x-kubernetes-map-type: atomic - prefix: - description: - An optional identifier to prepend - to each key in the ConfigMap. Must be a - C_IDENTIFIER. - type: string - secretRef: - description: The Secret to select from - properties: - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - Specify whether the Secret - must be defined - type: boolean - type: object - x-kubernetes-map-type: atomic - type: object - type: array - image: - description: |- - Container image name. - More info: https://kubernetes.io/docs/concepts/containers/images - This field is optional to allow higher level config management to default or override - container images in workload controllers like Deployments and StatefulSets. - type: string - imagePullPolicy: - description: |- - Image pull policy. - One of Always, Never, IfNotPresent. - Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. - Cannot be updated. - More info: https://kubernetes.io/docs/concepts/containers/images#updating-images - type: string - lifecycle: - description: |- - Actions that the management system should take in response to container lifecycle events. - Cannot be updated. - properties: - postStart: - description: |- - PostStart is called immediately after a container is created. If the handler fails, - the container is terminated and restarted according to its restart policy. - Other management of the container blocks until the hook completes. - More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks - properties: - exec: - description: - Exec specifies the action to - take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - httpGet: - description: - HTTPGet specifies the http - request to perform. - properties: - host: + optional: description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in - the request. HTTP allows repeated - headers. - items: - description: - HTTPHeader describes - a custom header to be used in HTTP - probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: - The header field - value - type: string - required: - - name - - value - type: object - type: array + If true, don't block pod startup if the referenced ClusterTrustBundle(s) + aren't available. If using name, then the named ClusterTrustBundle is + allowed not to exist. If using signerName, then the combination of + signerName and labelSelector is allowed to match zero + ClusterTrustBundles. + type: boolean path: - description: - Path to access on the HTTP - server. + description: Relative path from the + volume root to write the bundle. type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: + signerName: description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. + Select all ClusterTrustBundles that match this signer name. + Mutually-exclusive with name. The contents of all selected + ClusterTrustBundles will be unified and deduplicated. type: string required: - - port - type: object - sleep: - description: - Sleep represents the duration - that the container should sleep before - being terminated. - properties: - seconds: - description: - Seconds is the number of - seconds to sleep. - format: int64 - type: integer - required: - - seconds + - path type: object - tcpSocket: - description: |- - Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept - for the backward compatibility. There are no validation of this field and - lifecycle hooks will fail in runtime when tcp handler is specified. + configMap: + description: configMap information about + the configMap data to project properties: - host: - description: - "Optional: Host name to - connect to, defaults to the pod IP." - type: string - port: - anyOf: - - type: integer - - type: string + items: + description: |- + items if unspecified, each key-value pair in the Data field of the referenced + ConfigMap will be projected into the volume as a file whose name is the + key and content is the value. If specified, the listed keys will be + projected into the specified paths, and unlisted keys will not be + present. If a key is specified which is not present in the ConfigMap, + the volume setup will error unless it is marked optional. Paths must be + relative and may not contain the '..' path or start with '..'. + items: + description: Maps a string key to + a path within a volume. + properties: + key: + description: key is the key + to project. + type: string + mode: + description: |- + mode is Optional: mode bits used to set permissions on this file. + Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. + YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. + If not specified, the volume defaultMode will be used. + This might be in conflict with other options that affect the file + mode, like fsGroup, and the result can be other mode bits set. + format: int32 + type: integer + path: + description: |- + path is the relative path of the file to map the key to. + May not be an absolute path. + May not contain the path element '..'. + May not start with the string '..'. + type: string + required: + - key + - path + type: object + type: array + name: description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - required: - - port + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + optional: + description: optional specify whether + the ConfigMap or its keys must be + defined + type: boolean type: object - type: object - preStop: - description: |- - PreStop is called immediately before a container is terminated due to an - API request or management event such as liveness/startup probe failure, - preemption, resource contention, etc. The handler is not called if the - container crashes or exits. The Pod's termination grace period countdown begins before the - PreStop hook is executed. Regardless of the outcome of the handler, the - container will eventually terminate within the Pod's termination grace - period (unless delayed by finalizers). Other management of the container blocks until the hook completes - or until the termination grace period is reached. - More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks - properties: - exec: - description: - Exec specifies the action to - take. + x-kubernetes-map-type: atomic + downwardAPI: + description: downwardAPI information about + the downwardAPI data to project properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + description: Items is a list of DownwardAPIVolume + file items: - type: string + description: DownwardAPIVolumeFile + represents information to create + the file containing the pod field + properties: + fieldRef: + description: 'Required: Selects + a field of the pod: only annotations, + labels, name and namespace + are supported.' + properties: + apiVersion: + description: Version of + the schema the FieldPath + is written in terms of, + defaults to "v1". + type: string + fieldPath: + description: Path of the + field to select in the + specified API version. + type: string + required: + - fieldPath + type: object + x-kubernetes-map-type: atomic + mode: + description: |- + Optional: mode bits used to set permissions on this file, must be an octal value + between 0000 and 0777 or a decimal value between 0 and 511. + YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. + If not specified, the volume defaultMode will be used. + This might be in conflict with other options that affect the file + mode, like fsGroup, and the result can be other mode bits set. + format: int32 + type: integer + path: + description: 'Required: Path + is the relative path name + of the file to be created. + Must not be absolute or contain + the ''..'' path. Must be utf-8 + encoded. The first item of + the relative path must not + start with ''..''' + type: string + resourceFieldRef: + description: |- + Selects a resource of the container: only resources limits and requests + (limits.cpu, limits.memory, requests.cpu and requests.memory) are currently supported. + properties: + containerName: + description: 'Container + name: required for volumes, + optional for env vars' + type: string + divisor: + anyOf: + - type: integer + - type: string + description: Specifies the + output format of the exposed + resources, defaults to + "1" + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + resource: + description: 'Required: + resource to select' + type: string + required: + - resource + type: object + x-kubernetes-map-type: atomic + required: + - path + type: object type: array type: object - httpGet: - description: - HTTPGet specifies the http - request to perform. + secret: + description: secret information about + the secret data to project properties: - host: + items: description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in - the request. HTTP allows repeated - headers. + items if unspecified, each key-value pair in the Data field of the referenced + Secret will be projected into the volume as a file whose name is the + key and content is the value. If specified, the listed keys will be + projected into the specified paths, and unlisted keys will not be + present. If a key is specified which is not present in the Secret, + the volume setup will error unless it is marked optional. Paths must be + relative and may not contain the '..' path or start with '..'. items: - description: - HTTPHeader describes - a custom header to be used in HTTP - probes + description: Maps a string key to + a path within a volume. properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. + key: + description: key is the key + to project. type: string - value: - description: - The header field - value + mode: + description: |- + mode is Optional: mode bits used to set permissions on this file. + Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. + YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. + If not specified, the volume defaultMode will be used. + This might be in conflict with other options that affect the file + mode, like fsGroup, and the result can be other mode bits set. + format: int32 + type: integer + path: + description: |- + path is the relative path of the file to map the key to. + May not be an absolute path. + May not contain the path element '..'. + May not start with the string '..'. type: string required: - - name - - value + - key + - path type: object type: array - path: - description: - Path to access on the HTTP - server. - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: + name: description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? type: string - required: - - port + optional: + description: optional field specify + whether the Secret or its key must + be defined + type: boolean type: object - sleep: - description: - Sleep represents the duration - that the container should sleep before - being terminated. + x-kubernetes-map-type: atomic + serviceAccountToken: + description: serviceAccountToken is information + about the serviceAccountToken data to + project properties: - seconds: - description: - Seconds is the number of - seconds to sleep. + audience: + description: |- + audience is the intended audience of the token. A recipient of a token + must identify itself with an identifier specified in the audience of the + token, and otherwise should reject the token. The audience defaults to the + identifier of the apiserver. + type: string + expirationSeconds: + description: |- + expirationSeconds is the requested duration of validity of the service + account token. As the token approaches expiration, the kubelet volume + plugin will proactively rotate the service account token. The kubelet will + start trying to rotate the token if the token is older than 80 percent of + its time to live or if the token is older than 24 hours.Defaults to 1 hour + and must be at least 10 minutes. format: int64 type: integer - required: - - seconds - type: object - tcpSocket: - description: |- - Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept - for the backward compatibility. There are no validation of this field and - lifecycle hooks will fail in runtime when tcp handler is specified. - properties: - host: - description: - "Optional: Host name to - connect to, defaults to the pod IP." - type: string - port: - anyOf: - - type: integer - - type: string + path: description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true + path is the path relative to the mount point of the file to project the + token into. + type: string required: - - port + - path type: object type: object - type: object - livenessProbe: - description: |- - Periodic probe of container liveness. - Container will be restarted if the probe fails. - Cannot be updated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - properties: - exec: - description: Exec specifies the action to take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - failureThreshold: - description: |- - Minimum consecutive failures for the probe to be considered failed after having succeeded. - Defaults to 3. Minimum value is 1. - format: int32 - type: integer - grpc: - description: - GRPC specifies an action involving - a GRPC port. - properties: - port: - description: - Port number of the gRPC service. - Number must be in the range 1 to 65535. - format: int32 - type: integer - service: - description: |- - Service is the name of the service to place in the gRPC HealthCheckRequest - (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). - - - If this is not specified, the default behavior is defined by gRPC. - type: string - required: - - port - type: object - httpGet: - description: - HTTPGet specifies the http request - to perform. - properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in the - request. HTTP allows repeated headers. - items: - description: - HTTPHeader describes a custom - header to be used in HTTP probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: The header field value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: - description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. - type: string - required: - - port - type: object - initialDelaySeconds: - description: |- - Number of seconds after the container has started before liveness probes are initiated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - periodSeconds: - description: |- - How often (in seconds) to perform the probe. - Default to 10 seconds. Minimum value is 1. - format: int32 - type: integer - successThreshold: - description: |- - Minimum consecutive successes for the probe to be considered successful after having failed. - Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. - format: int32 - type: integer - tcpSocket: - description: - TCPSocket specifies an action involving - a TCP port. - properties: - host: - description: - "Optional: Host name to connect - to, defaults to the pod IP." - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - required: - - port - type: object - terminationGracePeriodSeconds: - description: |- - Optional duration in seconds the pod needs to terminate gracefully upon probe failure. - The grace period is the duration in seconds after the processes running in the pod are sent - a termination signal and the time when the processes are forcibly halted with a kill signal. - Set this value longer than the expected cleanup time for your process. - If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this - value overrides the value provided by the pod spec. - Value must be non-negative integer. The value zero indicates stop immediately via - the kill signal (no opportunity to shut down). - This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. - Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. - format: int64 - type: integer - timeoutSeconds: - description: |- - Number of seconds after which the probe times out. - Defaults to 1 second. Minimum value is 1. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - type: object - name: - description: |- - Name of the container specified as a DNS_LABEL. - Each container in a pod must have a unique name (DNS_LABEL). - Cannot be updated. - type: string - ports: - description: |- - List of ports to expose from the container. Not specifying a port here - DOES NOT prevent that port from being exposed. Any port which is - listening on the default "0.0.0.0" address inside a container will be - accessible from the network. - Modifying this array with strategic merge patch may corrupt the data. - For more information See https://github.com/kubernetes/kubernetes/issues/108255. - Cannot be updated. - items: - description: - ContainerPort represents a network - port in a single container. + type: array + type: object + quobyte: + description: quobyte represents a Quobyte mount + on the host that shares a pod's lifetime + properties: + group: + description: |- + group to map volume access to + Default is no group + type: string + readOnly: + description: |- + readOnly here will force the Quobyte volume to be mounted with read-only permissions. + Defaults to false. + type: boolean + registry: + description: |- + registry represents a single or multiple Quobyte Registry services + specified as a string as host:port pair (multiple entries are separated with commas) + which acts as the central registry for volumes + type: string + tenant: + description: |- + tenant owning the given Quobyte volume in the Backend + Used with dynamically provisioned Quobyte volumes, value is set by the plugin + type: string + user: + description: |- + user to map volume access to + Defaults to serivceaccount user + type: string + volume: + description: volume is a string that references + an already created Quobyte volume by name. + type: string + required: + - registry + - volume + type: object + rbd: + description: |- + rbd represents a Rados Block Device mount on the host that shares a pod's lifetime. + More info: https://examples.k8s.io/volumes/rbd/README.md + properties: + fsType: + description: |- + fsType is the filesystem type of the volume that you want to mount. + Tip: Ensure that the filesystem type is supported by the host operating system. + Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. + More info: https://kubernetes.io/docs/concepts/storage/volumes#rbd + TODO: how do we prevent errors in the filesystem from compromising the machine + type: string + image: + description: |- + image is the rados image name. + More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it + type: string + keyring: + description: |- + keyring is the path to key ring for RBDUser. + Default is /etc/ceph/keyring. + More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it + type: string + monitors: + description: |- + monitors is a collection of Ceph monitors. + More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it + items: + type: string + type: array + pool: + description: |- + pool is the rados pool name. + Default is rbd. + More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it + type: string + readOnly: + description: |- + readOnly here will force the ReadOnly setting in VolumeMounts. + Defaults to false. + More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it + type: boolean + secretRef: + description: |- + secretRef is name of the authentication secret for RBDUser. If provided + overrides keyring. + Default is nil. + More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it properties: - containerPort: - description: |- - Number of port to expose on the pod's IP address. - This must be a valid port number, 0 < x < 65536. - format: int32 - type: integer - hostIP: - description: - What host IP to bind the external - port to. - type: string - hostPort: - description: |- - Number of port to expose on the host. - If specified, this must be a valid port number, 0 < x < 65536. - If HostNetwork is specified, this must match ContainerPort. - Most containers do not need this. - format: int32 - type: integer name: description: |- - If specified, this must be an IANA_SVC_NAME and unique within the pod. Each - named port in a pod must have a unique name. Name for the port that can be - referred to by services. + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? type: string - protocol: - default: TCP + type: object + x-kubernetes-map-type: atomic + user: + description: |- + user is the rados user name. + Default is admin. + More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it + type: string + required: + - image + - monitors + type: object + scaleIO: + description: scaleIO represents a ScaleIO persistent + volume attached and mounted on Kubernetes nodes. + properties: + fsType: + description: |- + fsType is the filesystem type to mount. + Must be a filesystem type supported by the host operating system. + Ex. "ext4", "xfs", "ntfs". + Default is "xfs". + type: string + gateway: + description: gateway is the host address of + the ScaleIO API Gateway. + type: string + protectionDomain: + description: protectionDomain is the name of + the ScaleIO Protection Domain for the configured + storage. + type: string + readOnly: + description: |- + readOnly Defaults to false (read/write). ReadOnly here will force + the ReadOnly setting in VolumeMounts. + type: boolean + secretRef: + description: |- + secretRef references to the secret for ScaleIO user and other + sensitive information. If this is not provided, Login operation will fail. + properties: + name: description: |- - Protocol for port. Must be UDP, TCP, or SCTP. - Defaults to "TCP". + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? type: string - required: - - containerPort type: object - type: array - x-kubernetes-list-map-keys: - - containerPort - - protocol - x-kubernetes-list-type: map - readinessProbe: - description: |- - Periodic probe of container service readiness. - Container will be removed from service endpoints if the probe fails. - Cannot be updated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - properties: - exec: - description: Exec specifies the action to take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - failureThreshold: - description: |- - Minimum consecutive failures for the probe to be considered failed after having succeeded. - Defaults to 3. Minimum value is 1. - format: int32 - type: integer - grpc: - description: - GRPC specifies an action involving - a GRPC port. - properties: - port: - description: - Port number of the gRPC service. - Number must be in the range 1 to 65535. - format: int32 - type: integer - service: - description: |- - Service is the name of the service to place in the gRPC HealthCheckRequest - (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). - - - If this is not specified, the default behavior is defined by gRPC. - type: string - required: - - port - type: object - httpGet: - description: - HTTPGet specifies the http request - to perform. - properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in the - request. HTTP allows repeated headers. - items: - description: - HTTPHeader describes a custom - header to be used in HTTP probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: The header field value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: - description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. - type: string - required: - - port - type: object - initialDelaySeconds: - description: |- - Number of seconds after the container has started before liveness probes are initiated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - periodSeconds: - description: |- - How often (in seconds) to perform the probe. - Default to 10 seconds. Minimum value is 1. - format: int32 - type: integer - successThreshold: - description: |- - Minimum consecutive successes for the probe to be considered successful after having failed. - Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. - format: int32 - type: integer - tcpSocket: - description: - TCPSocket specifies an action involving - a TCP port. + x-kubernetes-map-type: atomic + sslEnabled: + description: sslEnabled Flag enable/disable + SSL communication with Gateway, default false + type: boolean + storageMode: + description: |- + storageMode indicates whether the storage for a volume should be ThickProvisioned or ThinProvisioned. + Default is ThinProvisioned. + type: string + storagePool: + description: storagePool is the ScaleIO Storage + Pool associated with the protection domain. + type: string + system: + description: system is the name of the storage + system as configured in ScaleIO. + type: string + volumeName: + description: |- + volumeName is the name of a volume already created in the ScaleIO system + that is associated with this volume source. + type: string + required: + - gateway + - secretRef + - system + type: object + secret: + description: |- + secret represents a secret that should populate this volume. + More info: https://kubernetes.io/docs/concepts/storage/volumes#secret + properties: + defaultMode: + description: |- + defaultMode is Optional: mode bits used to set permissions on created files by default. + Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. + YAML accepts both octal and decimal values, JSON requires decimal values + for mode bits. Defaults to 0644. + Directories within the path are not affected by this setting. + This might be in conflict with other options that affect the file + mode, like fsGroup, and the result can be other mode bits set. + format: int32 + type: integer + items: + description: |- + items If unspecified, each key-value pair in the Data field of the referenced + Secret will be projected into the volume as a file whose name is the + key and content is the value. If specified, the listed keys will be + projected into the specified paths, and unlisted keys will not be + present. If a key is specified which is not present in the Secret, + the volume setup will error unless it is marked optional. Paths must be + relative and may not contain the '..' path or start with '..'. + items: + description: Maps a string key to a path within + a volume. properties: - host: - description: - "Optional: Host name to connect - to, defaults to the pod IP." + key: + description: key is the key to project. type: string - port: - anyOf: - - type: integer - - type: string + mode: + description: |- + mode is Optional: mode bits used to set permissions on this file. + Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. + YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. + If not specified, the volume defaultMode will be used. + This might be in conflict with other options that affect the file + mode, like fsGroup, and the result can be other mode bits set. + format: int32 + type: integer + path: description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true + path is the relative path of the file to map the key to. + May not be an absolute path. + May not contain the path element '..'. + May not start with the string '..'. + type: string required: - - port + - key + - path type: object - terminationGracePeriodSeconds: - description: |- - Optional duration in seconds the pod needs to terminate gracefully upon probe failure. - The grace period is the duration in seconds after the processes running in the pod are sent - a termination signal and the time when the processes are forcibly halted with a kill signal. - Set this value longer than the expected cleanup time for your process. - If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this - value overrides the value provided by the pod spec. - Value must be non-negative integer. The value zero indicates stop immediately via - the kill signal (no opportunity to shut down). - This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. - Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. - format: int64 - type: integer - timeoutSeconds: - description: |- - Number of seconds after which the probe times out. - Defaults to 1 second. Minimum value is 1. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - type: object - resizePolicy: - description: Resources resize policy for the container. - items: - description: - ContainerResizePolicy represents - resource resize policy for the container. + type: array + optional: + description: optional field specify whether + the Secret or its keys must be defined + type: boolean + secretName: + description: |- + secretName is the name of the secret in the pod's namespace to use. + More info: https://kubernetes.io/docs/concepts/storage/volumes#secret + type: string + type: object + storageos: + description: storageOS represents a StorageOS volume + attached and mounted on Kubernetes nodes. + properties: + fsType: + description: |- + fsType is the filesystem type to mount. + Must be a filesystem type supported by the host operating system. + Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. + type: string + readOnly: + description: |- + readOnly defaults to false (read/write). ReadOnly here will force + the ReadOnly setting in VolumeMounts. + type: boolean + secretRef: + description: |- + secretRef specifies the secret to use for obtaining the StorageOS API + credentials. If not specified, default values will be attempted. properties: - resourceName: - description: |- - Name of the resource to which this resource resize policy applies. - Supported values: cpu, memory. - type: string - restartPolicy: + name: description: |- - Restart policy to apply when specified resource is resized. - If not specified, it defaults to NotRequired. + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? type: string + type: object + x-kubernetes-map-type: atomic + volumeName: + description: |- + volumeName is the human-readable name of the StorageOS volume. Volume + names are only unique within a namespace. + type: string + volumeNamespace: + description: |- + volumeNamespace specifies the scope of the volume within StorageOS. If no + namespace is specified then the Pod's namespace will be used. This allows the + Kubernetes name scoping to be mirrored within StorageOS for tighter integration. + Set VolumeName to any name to override the default behaviour. + Set to "default" if you are not using namespaces within StorageOS. + Namespaces that do not pre-exist within StorageOS will be created. + type: string + type: object + vsphereVolume: + description: vsphereVolume represents a vSphere + volume attached and mounted on kubelets host machine + properties: + fsType: + description: |- + fsType is filesystem type to mount. + Must be a filesystem type supported by the host operating system. + Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. + type: string + storagePolicyID: + description: storagePolicyID is the storage + Policy Based Management (SPBM) profile ID + associated with the StoragePolicyName. + type: string + storagePolicyName: + description: storagePolicyName is the storage + Policy Based Management (SPBM) profile name. + type: string + volumePath: + description: volumePath is the path that identifies + vSphere volume vmdk + type: string + required: + - volumePath + type: object + required: + - name + type: object + type: array + required: + - containers + type: object + type: object + restartPolicy: + default: Default + description: RestartPolicy defines the restart policy when pod + failures happen. + enum: + - Default + - RecreateGroupOnPodRestart + type: string + size: + default: 1 + description: |- + Number of pods to create. It is the total number of pods in each group. + The minimum is 1 which represent the leader. When set to 1, the leader + pod is created for each group as well as a 0-replica StatefulSet for the workers. + Default to 1. + format: int32 + type: integer + subGroupPolicy: + description: |- + SubGroupPolicy describes the policy that will be applied when creating subgroups + in each replica. + properties: + subGroupSize: + description: |- + The number of pods per subgroup. This value is immutable, + and must not be greater than LeaderWorkerSet.Spec.Size. + Size must be divisible by subGroupSize in which case the + subgroups will be of equal size. Or size - 1 is divisible + by subGroupSize, in which case the leader is considered as + the extra pod, and will be part of the first subgroup. + format: int32 + type: integer + type: object + workerTemplate: + description: WorkerTemplate defines the pod template for worker + pods. + properties: + metadata: + description: |- + Standard object's metadata. + More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata + properties: + annotations: + additionalProperties: + type: string + type: object + finalizers: + items: + type: string + type: array + labels: + additionalProperties: + type: string + type: object + name: + type: string + namespace: + type: string + type: object + spec: + description: |- + Specification of the desired behavior of the pod. + More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status + properties: + activeDeadlineSeconds: + description: |- + Optional duration in seconds the pod may be active on the node relative to + StartTime before the system will actively try to mark it failed and kill associated containers. + Value must be a positive integer. + format: int64 + type: integer + affinity: + description: If specified, the pod's scheduling constraints + properties: + nodeAffinity: + description: Describes node affinity scheduling rules + for the pod. + properties: + preferredDuringSchedulingIgnoredDuringExecution: + description: |- + The scheduler will prefer to schedule pods to nodes that satisfy + the affinity expressions specified by this field, but it may choose + a node that violates one or more of the expressions. The node that is + most preferred is the one with the greatest sum of weights, i.e. + for each node that meets all of the scheduling requirements (resource + request, requiredDuringScheduling affinity expressions, etc.), + compute a sum by iterating through the elements of this field and adding + "weight" to the sum if the node matches the corresponding matchExpressions; the + node(s) with the highest sum are the most preferred. + items: + description: |- + An empty preferred scheduling term matches all objects with implicit weight 0 + (i.e. it's a no-op). A null preferred scheduling term matches no objects (i.e. is also a no-op). + properties: + preference: + description: A node selector term, associated + with the corresponding weight. + properties: + matchExpressions: + description: A list of node selector + requirements by node's labels. + items: + description: |- + A node selector requirement is a selector that contains values, a key, and an operator + that relates the key and values. + properties: + key: + description: The label key that + the selector applies to. + type: string + operator: + description: |- + Represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt. + type: string + values: + description: |- + An array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. If the operator is Gt or Lt, the values + array must have a single element, which will be interpreted as an integer. + This array is replaced during a strategic merge patch. + items: + type: string + type: array + required: + - key + - operator + type: object + type: array + matchFields: + description: A list of node selector + requirements by node's fields. + items: + description: |- + A node selector requirement is a selector that contains values, a key, and an operator + that relates the key and values. + properties: + key: + description: The label key that + the selector applies to. + type: string + operator: + description: |- + Represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt. + type: string + values: + description: |- + An array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. If the operator is Gt or Lt, the values + array must have a single element, which will be interpreted as an integer. + This array is replaced during a strategic merge patch. + items: + type: string + type: array + required: + - key + - operator + type: object + type: array + type: object + x-kubernetes-map-type: atomic + weight: + description: Weight associated with matching + the corresponding nodeSelectorTerm, in + the range 1-100. + format: int32 + type: integer required: - - resourceName - - restartPolicy + - preference + - weight type: object type: array - x-kubernetes-list-type: atomic - resources: + requiredDuringSchedulingIgnoredDuringExecution: description: |- - Compute Resources required by this container. - Cannot be updated. - More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + If the affinity requirements specified by this field are not met at + scheduling time, the pod will not be scheduled onto the node. + If the affinity requirements specified by this field cease to be met + at some point during pod execution (e.g. due to an update), the system + may or may not try to eventually evict the pod from its node. properties: - claims: - description: |- - Claims lists the names of resources, defined in spec.resourceClaims, - that are used by this container. - - - This is an alpha field and requires enabling the - DynamicResourceAllocation feature gate. - - - This field is immutable. It can only be set for containers. + nodeSelectorTerms: + description: Required. A list of node selector + terms. The terms are ORed. items: - description: - ResourceClaim references one - entry in PodSpec.ResourceClaims. + description: |- + A null or empty node selector term matches no objects. The requirements of + them are ANDed. + The TopologySelectorTerm type implements a subset of the NodeSelectorTerm. properties: - name: - description: |- - Name must match the name of one entry in pod.spec.resourceClaims of - the Pod where this field is used. It makes that resource available - inside a container. - type: string - required: - - name + matchExpressions: + description: A list of node selector + requirements by node's labels. + items: + description: |- + A node selector requirement is a selector that contains values, a key, and an operator + that relates the key and values. + properties: + key: + description: The label key that + the selector applies to. + type: string + operator: + description: |- + Represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt. + type: string + values: + description: |- + An array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. If the operator is Gt or Lt, the values + array must have a single element, which will be interpreted as an integer. + This array is replaced during a strategic merge patch. + items: + type: string + type: array + required: + - key + - operator + type: object + type: array + matchFields: + description: A list of node selector + requirements by node's fields. + items: + description: |- + A node selector requirement is a selector that contains values, a key, and an operator + that relates the key and values. + properties: + key: + description: The label key that + the selector applies to. + type: string + operator: + description: |- + Represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists, DoesNotExist. Gt, and Lt. + type: string + values: + description: |- + An array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. If the operator is Gt or Lt, the values + array must have a single element, which will be interpreted as an integer. + This array is replaced during a strategic merge patch. + items: + type: string + type: array + required: + - key + - operator + type: object + type: array type: object + x-kubernetes-map-type: atomic type: array - x-kubernetes-list-map-keys: - - name - x-kubernetes-list-type: map - limits: - additionalProperties: - anyOf: - - type: integer - - type: string - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ - x-kubernetes-int-or-string: true - description: |- - Limits describes the maximum amount of compute resources allowed. - More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ - type: object - requests: - additionalProperties: - anyOf: - - type: integer - - type: string - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ - x-kubernetes-int-or-string: true - description: |- - Requests describes the minimum amount of compute resources required. - If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, - otherwise to an implementation-defined value. Requests cannot exceed Limits. - More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ - type: object - type: object - restartPolicy: - description: |- - RestartPolicy defines the restart behavior of individual containers in a pod. - This field may only be set for init containers, and the only allowed value is "Always". - For non-init containers or when this field is not specified, - the restart behavior is defined by the Pod's restart policy and the container type. - Setting the RestartPolicy as "Always" for the init container will have the following effect: - this init container will be continually restarted on - exit until all regular containers have terminated. Once all regular - containers have completed, all init containers with restartPolicy "Always" - will be shut down. This lifecycle differs from normal init containers and - is often referred to as a "sidecar" container. Although this init - container still starts in the init container sequence, it does not wait - for the container to complete before proceeding to the next init - container. Instead, the next init container starts immediately after this - init container is started, or after any startupProbe has successfully - completed. - type: string - securityContext: - description: |- - SecurityContext defines the security options the container should be run with. - If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. - More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/ - properties: - allowPrivilegeEscalation: - description: |- - AllowPrivilegeEscalation controls whether a process can gain more - privileges than its parent process. This bool directly controls if - the no_new_privs flag will be set on the container process. - AllowPrivilegeEscalation is true always when the container is: - 1) run as Privileged - 2) has CAP_SYS_ADMIN - Note that this field cannot be set when spec.os.name is windows. - type: boolean - capabilities: - description: |- - The capabilities to add/drop when running containers. - Defaults to the default set of capabilities granted by the container runtime. - Note that this field cannot be set when spec.os.name is windows. - properties: - add: - description: Added capabilities - items: - description: - Capability represent POSIX - capabilities type - type: string - type: array - drop: - description: Removed capabilities - items: - description: - Capability represent POSIX - capabilities type - type: string - type: array - type: object - privileged: - description: |- - Run container in privileged mode. - Processes in privileged containers are essentially equivalent to root on the host. - Defaults to false. - Note that this field cannot be set when spec.os.name is windows. - type: boolean - procMount: - description: |- - procMount denotes the type of proc mount to use for the containers. - The default is DefaultProcMount which uses the container runtime defaults for - readonly paths and masked paths. - This requires the ProcMountType feature flag to be enabled. - Note that this field cannot be set when spec.os.name is windows. - type: string - readOnlyRootFilesystem: - description: |- - Whether this container has a read-only root filesystem. - Default is false. - Note that this field cannot be set when spec.os.name is windows. - type: boolean - runAsGroup: - description: |- - The GID to run the entrypoint of the container process. - Uses runtime default if unset. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is windows. - format: int64 - type: integer - runAsNonRoot: - description: |- - Indicates that the container must run as a non-root user. - If true, the Kubelet will validate the image at runtime to ensure that it - does not run as UID 0 (root) and fail to start the container if it does. - If unset or false, no such validation will be performed. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - type: boolean - runAsUser: - description: |- - The UID to run the entrypoint of the container process. - Defaults to user specified in image metadata if unspecified. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is windows. - format: int64 - type: integer - seLinuxOptions: - description: |- - The SELinux context to be applied to the container. - If unspecified, the container runtime will allocate a random SELinux context for each - container. May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is windows. - properties: - level: - description: - Level is SELinux level label - that applies to the container. - type: string - role: - description: - Role is a SELinux role label - that applies to the container. - type: string - type: - description: - Type is a SELinux type label - that applies to the container. - type: string - user: - description: - User is a SELinux user label - that applies to the container. - type: string - type: object - seccompProfile: - description: |- - The seccomp options to use by this container. If seccomp options are - provided at both the pod & container level, the container options - override the pod options. - Note that this field cannot be set when spec.os.name is windows. - properties: - localhostProfile: - description: |- - localhostProfile indicates a profile defined in a file on the node should be used. - The profile must be preconfigured on the node to work. - Must be a descending path, relative to the kubelet's configured seccomp profile location. - Must be set if type is "Localhost". Must NOT be set for any other type. - type: string - type: - description: |- - type indicates which kind of seccomp profile will be applied. - Valid options are: - - - Localhost - a profile defined in a file on the node should be used. - RuntimeDefault - the container runtime default profile should be used. - Unconfined - no profile should be applied. - type: string - required: - - type - type: object - windowsOptions: - description: |- - The Windows specific settings applied to all containers. - If unspecified, the options from the PodSecurityContext will be used. - If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is linux. - properties: - gmsaCredentialSpec: - description: |- - GMSACredentialSpec is where the GMSA admission webhook - (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the - GMSA credential spec named by the GMSACredentialSpecName field. - type: string - gmsaCredentialSpecName: - description: - GMSACredentialSpecName is the - name of the GMSA credential spec to use. - type: string - hostProcess: - description: |- - HostProcess determines if a container should be run as a 'Host Process' container. - All of a Pod's containers must have the same effective HostProcess value - (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). - In addition, if HostProcess is true then HostNetwork must also be set to true. - type: boolean - runAsUserName: - description: |- - The UserName in Windows to run the entrypoint of the container process. - Defaults to the user specified in image metadata if unspecified. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - type: string - type: object + required: + - nodeSelectorTerms type: object - startupProbe: - description: |- - StartupProbe indicates that the Pod has successfully initialized. - If specified, no other probes are executed until this completes successfully. - If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. - This can be used to provide different probe parameters at the beginning of a Pod's lifecycle, - when it might take a long time to load data or warm a cache, than during steady-state operation. - This cannot be updated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - properties: - exec: - description: Exec specifies the action to take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - failureThreshold: - description: |- - Minimum consecutive failures for the probe to be considered failed after having succeeded. - Defaults to 3. Minimum value is 1. - format: int32 - type: integer - grpc: - description: - GRPC specifies an action involving - a GRPC port. - properties: - port: - description: - Port number of the gRPC service. - Number must be in the range 1 to 65535. - format: int32 - type: integer - service: - description: |- - Service is the name of the service to place in the gRPC HealthCheckRequest - (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). - - - If this is not specified, the default behavior is defined by gRPC. - type: string - required: - - port - type: object - httpGet: - description: - HTTPGet specifies the http request - to perform. - properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in the - request. HTTP allows repeated headers. - items: - description: - HTTPHeader describes a custom - header to be used in HTTP probes + x-kubernetes-map-type: atomic + type: object + podAffinity: + description: Describes pod affinity scheduling rules + (e.g. co-locate this pod in the same node, zone, + etc. as some other pod(s)). + properties: + preferredDuringSchedulingIgnoredDuringExecution: + description: |- + The scheduler will prefer to schedule pods to nodes that satisfy + the affinity expressions specified by this field, but it may choose + a node that violates one or more of the expressions. The node that is + most preferred is the one with the greatest sum of weights, i.e. + for each node that meets all of the scheduling requirements (resource + request, requiredDuringScheduling affinity expressions, etc.), + compute a sum by iterating through the elements of this field and adding + "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the + node(s) with the highest sum are the most preferred. + items: + description: The weights of all of the matched + WeightedPodAffinityTerm fields are added per-node + to find the most preferred node(s) + properties: + podAffinityTerm: + description: Required. A pod affinity term, + associated with the corresponding weight. + properties: + labelSelector: + description: |- + A label query over a set of resources, in this case pods. + If it's null, this PodAffinityTerm matches with no Pods. + properties: + matchExpressions: + description: matchExpressions is + a list of label selector requirements. + The requirements are ANDed. + items: + description: |- + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. + properties: + key: + description: key is the label + key that the selector applies + to. + type: string + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. + items: + type: string + type: array + required: + - key + - operator + type: object + type: array + matchLabels: + additionalProperties: + type: string + description: |- + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. + type: object + type: object + x-kubernetes-map-type: atomic + matchLabelKeys: + description: |- + MatchLabelKeys is a set of pod label keys to select which pods will + be taken into consideration. The keys are used to lookup values from the + incoming pod labels, those key-value labels are merged with `LabelSelector` as `key in (value)` + to select the group of existing pods which pods will be taken into consideration + for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming + pod labels will be ignored. The default value is empty. + The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. + Also, MatchLabelKeys cannot be set when LabelSelector isn't set. + This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. + items: + type: string + type: array + x-kubernetes-list-type: atomic + mismatchLabelKeys: + description: |- + MismatchLabelKeys is a set of pod label keys to select which pods will + be taken into consideration. The keys are used to lookup values from the + incoming pod labels, those key-value labels are merged with `LabelSelector` as `key notin (value)` + to select the group of existing pods which pods will be taken into consideration + for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming + pod labels will be ignored. The default value is empty. + The same key is forbidden to exist in both MismatchLabelKeys and LabelSelector. + Also, MismatchLabelKeys cannot be set when LabelSelector isn't set. + This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. + items: + type: string + type: array + x-kubernetes-list-type: atomic + namespaceSelector: + description: |- + A label query over the set of namespaces that the term applies to. + The term is applied to the union of the namespaces selected by this field + and the ones listed in the namespaces field. + null selector and null or empty namespaces list means "this pod's namespace". + An empty selector ({}) matches all namespaces. properties: - name: + matchExpressions: + description: matchExpressions is + a list of label selector requirements. + The requirements are ANDed. + items: + description: |- + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. + properties: + key: + description: key is the label + key that the selector applies + to. + type: string + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. + items: + type: string + type: array + required: + - key + - operator + type: object + type: array + matchLabels: + additionalProperties: + type: string description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: The header field value - type: string - required: - - name - - value + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. + type: object type: object - type: array - path: - description: - Path to access on the HTTP - server. + x-kubernetes-map-type: atomic + namespaces: + description: |- + namespaces specifies a static list of namespace names that the term applies to. + The term is applied to the union of the namespaces listed in this field + and the ones selected by namespaceSelector. + null or empty namespaces list and null namespaceSelector means "this pod's namespace". + items: + type: string + type: array + topologyKey: + description: |- + This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching + the labelSelector in the specified namespaces, where co-located is defined as running on a node + whose value of the label with key topologyKey matches that of any node on which any of the + selected pods is running. + Empty topologyKey is not allowed. + type: string + required: + - topologyKey + type: object + weight: + description: |- + weight associated with matching the corresponding podAffinityTerm, + in the range 1-100. + format: int32 + type: integer + required: + - podAffinityTerm + - weight + type: object + type: array + requiredDuringSchedulingIgnoredDuringExecution: + description: |- + If the affinity requirements specified by this field are not met at + scheduling time, the pod will not be scheduled onto the node. + If the affinity requirements specified by this field cease to be met + at some point during pod execution (e.g. due to a pod label update), the + system may or may not try to eventually evict the pod from its node. + When there are multiple elements, the lists of nodes corresponding to each + podAffinityTerm are intersected, i.e. all terms must be satisfied. + items: + description: |- + Defines a set of pods (namely those matching the labelSelector + relative to the given namespace(s)) that this pod should be + co-located (affinity) or not co-located (anti-affinity) with, + where co-located is defined as running on a node whose value of + the label with key matches that of any node on which + a pod of the set of pods is running + properties: + labelSelector: + description: |- + A label query over a set of resources, in this case pods. + If it's null, this PodAffinityTerm matches with no Pods. + properties: + matchExpressions: + description: matchExpressions is a list + of label selector requirements. The + requirements are ANDed. + items: + description: |- + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. + properties: + key: + description: key is the label + key that the selector applies + to. + type: string + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. + items: + type: string + type: array + required: + - key + - operator + type: object + type: array + matchLabels: + additionalProperties: + type: string + description: |- + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. + type: object + type: object + x-kubernetes-map-type: atomic + matchLabelKeys: + description: |- + MatchLabelKeys is a set of pod label keys to select which pods will + be taken into consideration. The keys are used to lookup values from the + incoming pod labels, those key-value labels are merged with `LabelSelector` as `key in (value)` + to select the group of existing pods which pods will be taken into consideration + for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming + pod labels will be ignored. The default value is empty. + The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. + Also, MatchLabelKeys cannot be set when LabelSelector isn't set. + This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. + items: type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: - description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. + type: array + x-kubernetes-list-type: atomic + mismatchLabelKeys: + description: |- + MismatchLabelKeys is a set of pod label keys to select which pods will + be taken into consideration. The keys are used to lookup values from the + incoming pod labels, those key-value labels are merged with `LabelSelector` as `key notin (value)` + to select the group of existing pods which pods will be taken into consideration + for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming + pod labels will be ignored. The default value is empty. + The same key is forbidden to exist in both MismatchLabelKeys and LabelSelector. + Also, MismatchLabelKeys cannot be set when LabelSelector isn't set. + This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. + items: type: string - required: - - port - type: object - initialDelaySeconds: - description: |- - Number of seconds after the container has started before liveness probes are initiated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - periodSeconds: - description: |- - How often (in seconds) to perform the probe. - Default to 10 seconds. Minimum value is 1. - format: int32 - type: integer - successThreshold: - description: |- - Minimum consecutive successes for the probe to be considered successful after having failed. - Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. - format: int32 - type: integer - tcpSocket: - description: - TCPSocket specifies an action involving - a TCP port. - properties: - host: - description: - "Optional: Host name to connect - to, defaults to the pod IP." + type: array + x-kubernetes-list-type: atomic + namespaceSelector: + description: |- + A label query over the set of namespaces that the term applies to. + The term is applied to the union of the namespaces selected by this field + and the ones listed in the namespaces field. + null selector and null or empty namespaces list means "this pod's namespace". + An empty selector ({}) matches all namespaces. + properties: + matchExpressions: + description: matchExpressions is a list + of label selector requirements. The + requirements are ANDed. + items: + description: |- + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. + properties: + key: + description: key is the label + key that the selector applies + to. + type: string + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. + items: + type: string + type: array + required: + - key + - operator + type: object + type: array + matchLabels: + additionalProperties: + type: string + description: |- + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. + type: object + type: object + x-kubernetes-map-type: atomic + namespaces: + description: |- + namespaces specifies a static list of namespace names that the term applies to. + The term is applied to the union of the namespaces listed in this field + and the ones selected by namespaceSelector. + null or empty namespaces list and null namespaceSelector means "this pod's namespace". + items: type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - required: - - port - type: object - terminationGracePeriodSeconds: - description: |- - Optional duration in seconds the pod needs to terminate gracefully upon probe failure. - The grace period is the duration in seconds after the processes running in the pod are sent - a termination signal and the time when the processes are forcibly halted with a kill signal. - Set this value longer than the expected cleanup time for your process. - If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this - value overrides the value provided by the pod spec. - Value must be non-negative integer. The value zero indicates stop immediately via - the kill signal (no opportunity to shut down). - This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. - Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. - format: int64 - type: integer - timeoutSeconds: - description: |- - Number of seconds after which the probe times out. - Defaults to 1 second. Minimum value is 1. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - type: object - stdin: - description: |- - Whether this container should allocate a buffer for stdin in the container runtime. If this - is not set, reads from stdin in the container will always result in EOF. - Default is false. - type: boolean - stdinOnce: - description: |- - Whether the container runtime should close the stdin channel after it has been opened by - a single attach. When stdin is true the stdin stream will remain open across multiple attach - sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the - first client attaches to stdin, and then remains open and accepts data until the client disconnects, - at which time stdin is closed and remains closed until the container is restarted. If this - flag is false, a container processes that reads from stdin will never receive an EOF. - Default is false - type: boolean - terminationMessagePath: - description: |- - Optional: Path at which the file to which the container's termination message - will be written is mounted into the container's filesystem. - Message written is intended to be brief final status, such as an assertion failure message. - Will be truncated by the node if greater than 4096 bytes. The total message length across - all containers will be limited to 12kb. - Defaults to /dev/termination-log. - Cannot be updated. - type: string - terminationMessagePolicy: - description: |- - Indicate how the termination message should be populated. File will use the contents of - terminationMessagePath to populate the container status message on both success and failure. - FallbackToLogsOnError will use the last chunk of container log output if the termination - message file is empty and the container exited with an error. - The log output is limited to 2048 bytes or 80 lines, whichever is smaller. - Defaults to File. - Cannot be updated. - type: string - tty: - description: |- - Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. - Default is false. - type: boolean - volumeDevices: - description: - volumeDevices is the list of block - devices to be used by the container. + type: array + topologyKey: + description: |- + This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching + the labelSelector in the specified namespaces, where co-located is defined as running on a node + whose value of the label with key topologyKey matches that of any node on which any of the + selected pods is running. + Empty topologyKey is not allowed. + type: string + required: + - topologyKey + type: object + type: array + type: object + podAntiAffinity: + description: Describes pod anti-affinity scheduling + rules (e.g. avoid putting this pod in the same node, + zone, etc. as some other pod(s)). + properties: + preferredDuringSchedulingIgnoredDuringExecution: + description: |- + The scheduler will prefer to schedule pods to nodes that satisfy + the anti-affinity expressions specified by this field, but it may choose + a node that violates one or more of the expressions. The node that is + most preferred is the one with the greatest sum of weights, i.e. + for each node that meets all of the scheduling requirements (resource + request, requiredDuringScheduling anti-affinity expressions, etc.), + compute a sum by iterating through the elements of this field and adding + "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the + node(s) with the highest sum are the most preferred. items: - description: - volumeDevice describes a mapping - of a raw block device within a container. + description: The weights of all of the matched + WeightedPodAffinityTerm fields are added per-node + to find the most preferred node(s) properties: - devicePath: - description: - devicePath is the path inside - of the container that the device will be - mapped to. - type: string - name: - description: - name must match the name of a - persistentVolumeClaim in the pod - type: string + podAffinityTerm: + description: Required. A pod affinity term, + associated with the corresponding weight. + properties: + labelSelector: + description: |- + A label query over a set of resources, in this case pods. + If it's null, this PodAffinityTerm matches with no Pods. + properties: + matchExpressions: + description: matchExpressions is + a list of label selector requirements. + The requirements are ANDed. + items: + description: |- + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. + properties: + key: + description: key is the label + key that the selector applies + to. + type: string + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. + items: + type: string + type: array + required: + - key + - operator + type: object + type: array + matchLabels: + additionalProperties: + type: string + description: |- + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. + type: object + type: object + x-kubernetes-map-type: atomic + matchLabelKeys: + description: |- + MatchLabelKeys is a set of pod label keys to select which pods will + be taken into consideration. The keys are used to lookup values from the + incoming pod labels, those key-value labels are merged with `LabelSelector` as `key in (value)` + to select the group of existing pods which pods will be taken into consideration + for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming + pod labels will be ignored. The default value is empty. + The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. + Also, MatchLabelKeys cannot be set when LabelSelector isn't set. + This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. + items: + type: string + type: array + x-kubernetes-list-type: atomic + mismatchLabelKeys: + description: |- + MismatchLabelKeys is a set of pod label keys to select which pods will + be taken into consideration. The keys are used to lookup values from the + incoming pod labels, those key-value labels are merged with `LabelSelector` as `key notin (value)` + to select the group of existing pods which pods will be taken into consideration + for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming + pod labels will be ignored. The default value is empty. + The same key is forbidden to exist in both MismatchLabelKeys and LabelSelector. + Also, MismatchLabelKeys cannot be set when LabelSelector isn't set. + This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. + items: + type: string + type: array + x-kubernetes-list-type: atomic + namespaceSelector: + description: |- + A label query over the set of namespaces that the term applies to. + The term is applied to the union of the namespaces selected by this field + and the ones listed in the namespaces field. + null selector and null or empty namespaces list means "this pod's namespace". + An empty selector ({}) matches all namespaces. + properties: + matchExpressions: + description: matchExpressions is + a list of label selector requirements. + The requirements are ANDed. + items: + description: |- + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. + properties: + key: + description: key is the label + key that the selector applies + to. + type: string + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. + items: + type: string + type: array + required: + - key + - operator + type: object + type: array + matchLabels: + additionalProperties: + type: string + description: |- + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. + type: object + type: object + x-kubernetes-map-type: atomic + namespaces: + description: |- + namespaces specifies a static list of namespace names that the term applies to. + The term is applied to the union of the namespaces listed in this field + and the ones selected by namespaceSelector. + null or empty namespaces list and null namespaceSelector means "this pod's namespace". + items: + type: string + type: array + topologyKey: + description: |- + This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching + the labelSelector in the specified namespaces, where co-located is defined as running on a node + whose value of the label with key topologyKey matches that of any node on which any of the + selected pods is running. + Empty topologyKey is not allowed. + type: string + required: + - topologyKey + type: object + weight: + description: |- + weight associated with matching the corresponding podAffinityTerm, + in the range 1-100. + format: int32 + type: integer required: - - devicePath - - name + - podAffinityTerm + - weight type: object type: array - volumeMounts: - description: |- - Pod volumes to mount into the container's filesystem. - Cannot be updated. + requiredDuringSchedulingIgnoredDuringExecution: + description: |- + If the anti-affinity requirements specified by this field are not met at + scheduling time, the pod will not be scheduled onto the node. + If the anti-affinity requirements specified by this field cease to be met + at some point during pod execution (e.g. due to a pod label update), the + system may or may not try to eventually evict the pod from its node. + When there are multiple elements, the lists of nodes corresponding to each + podAffinityTerm are intersected, i.e. all terms must be satisfied. items: - description: - VolumeMount describes a mounting - of a Volume within a container. + description: |- + Defines a set of pods (namely those matching the labelSelector + relative to the given namespace(s)) that this pod should be + co-located (affinity) or not co-located (anti-affinity) with, + where co-located is defined as running on a node whose value of + the label with key matches that of any node on which + a pod of the set of pods is running properties: - mountPath: + labelSelector: description: |- - Path within the container at which the volume should be mounted. Must - not contain ':'. - type: string - mountPropagation: + A label query over a set of resources, in this case pods. + If it's null, this PodAffinityTerm matches with no Pods. + properties: + matchExpressions: + description: matchExpressions is a list + of label selector requirements. The + requirements are ANDed. + items: + description: |- + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. + properties: + key: + description: key is the label + key that the selector applies + to. + type: string + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. + items: + type: string + type: array + required: + - key + - operator + type: object + type: array + matchLabels: + additionalProperties: + type: string + description: |- + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. + type: object + type: object + x-kubernetes-map-type: atomic + matchLabelKeys: description: |- - mountPropagation determines how mounts are propagated from the host - to container and the other way around. - When not set, MountPropagationNone is used. - This field is beta in 1.10. - type: string - name: - description: - This must match the Name of a - Volume. - type: string - readOnly: + MatchLabelKeys is a set of pod label keys to select which pods will + be taken into consideration. The keys are used to lookup values from the + incoming pod labels, those key-value labels are merged with `LabelSelector` as `key in (value)` + to select the group of existing pods which pods will be taken into consideration + for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming + pod labels will be ignored. The default value is empty. + The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. + Also, MatchLabelKeys cannot be set when LabelSelector isn't set. + This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. + items: + type: string + type: array + x-kubernetes-list-type: atomic + mismatchLabelKeys: description: |- - Mounted read-only if true, read-write otherwise (false or unspecified). - Defaults to false. - type: boolean - subPath: + MismatchLabelKeys is a set of pod label keys to select which pods will + be taken into consideration. The keys are used to lookup values from the + incoming pod labels, those key-value labels are merged with `LabelSelector` as `key notin (value)` + to select the group of existing pods which pods will be taken into consideration + for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming + pod labels will be ignored. The default value is empty. + The same key is forbidden to exist in both MismatchLabelKeys and LabelSelector. + Also, MismatchLabelKeys cannot be set when LabelSelector isn't set. + This is an alpha field and requires enabling MatchLabelKeysInPodAffinity feature gate. + items: + type: string + type: array + x-kubernetes-list-type: atomic + namespaceSelector: + description: |- + A label query over the set of namespaces that the term applies to. + The term is applied to the union of the namespaces selected by this field + and the ones listed in the namespaces field. + null selector and null or empty namespaces list means "this pod's namespace". + An empty selector ({}) matches all namespaces. + properties: + matchExpressions: + description: matchExpressions is a list + of label selector requirements. The + requirements are ANDed. + items: + description: |- + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. + properties: + key: + description: key is the label + key that the selector applies + to. + type: string + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. + items: + type: string + type: array + required: + - key + - operator + type: object + type: array + matchLabels: + additionalProperties: + type: string + description: |- + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. + type: object + type: object + x-kubernetes-map-type: atomic + namespaces: description: |- - Path within the volume from which the container's volume should be mounted. - Defaults to "" (volume's root). - type: string - subPathExpr: + namespaces specifies a static list of namespace names that the term applies to. + The term is applied to the union of the namespaces listed in this field + and the ones selected by namespaceSelector. + null or empty namespaces list and null namespaceSelector means "this pod's namespace". + items: + type: string + type: array + topologyKey: description: |- - Expanded path within the volume from which the container's volume should be mounted. - Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. - Defaults to "" (volume's root). - SubPathExpr and SubPath are mutually exclusive. + This pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching + the labelSelector in the specified namespaces, where co-located is defined as running on a node + whose value of the label with key topologyKey matches that of any node on which any of the + selected pods is running. + Empty topologyKey is not allowed. type: string required: - - mountPath - - name + - topologyKey type: object type: array - workingDir: - description: |- - Container's working directory. - If not specified, the container runtime's default will be used, which - might be configured in the container image. - Cannot be updated. - type: string - required: - - name type: object - type: array - dnsConfig: - description: |- - Specifies the DNS parameters of a pod. - Parameters specified here will be merged to the generated DNS - configuration based on DNSPolicy. + type: object + automountServiceAccountToken: + description: AutomountServiceAccountToken indicates whether + a service account token should be automatically mounted. + type: boolean + containers: + description: |- + List of containers belonging to the pod. + Containers cannot currently be added or removed. + There must be at least one container in a Pod. + Cannot be updated. + items: + description: A single application container that you + want to run within a pod. properties: - nameservers: + args: + description: |- + Arguments to the entrypoint. + The container image's CMD is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: + type: string + type: array + command: description: |- - A list of DNS name server IP addresses. - This will be appended to the base nameservers generated from DNSPolicy. - Duplicated nameservers will be removed. + Entrypoint array. Not executed within a shell. + The container image's ENTRYPOINT is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell items: type: string type: array - options: + env: description: |- - A list of DNS resolver options. - This will be merged with the base options generated from DNSPolicy. - Duplicated entries will be removed. Resolution options given in Options - will override those that appear in the base DNSPolicy. + List of environment variables to set in the container. + Cannot be updated. items: - description: - PodDNSConfigOption defines DNS resolver - options of a pod. + description: EnvVar represents an environment + variable present in a Container. properties: name: - description: Required. + description: Name of the environment variable. + Must be a C_IDENTIFIER. type: string value: - type: string + description: |- + Variable references $(VAR_NAME) are expanded + using the previously defined environment variables in the container and + any service environment variables. If a variable cannot be resolved, + the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. + "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". + Escaped references will never be expanded, regardless of whether the variable + exists or not. + Defaults to "". + type: string + valueFrom: + description: Source for the environment variable's + value. Cannot be used if value is not empty. + properties: + configMapKeyRef: + description: Selects a key of a ConfigMap. + properties: + key: + description: The key to select. + type: string + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + optional: + description: Specify whether the ConfigMap + or its key must be defined + type: boolean + required: + - key + type: object + x-kubernetes-map-type: atomic + fieldRef: + description: |- + Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['']`, `metadata.annotations['']`, + spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs. + properties: + apiVersion: + description: Version of the schema + the FieldPath is written in terms + of, defaults to "v1". + type: string + fieldPath: + description: Path of the field to + select in the specified API version. + type: string + required: + - fieldPath + type: object + x-kubernetes-map-type: atomic + resourceFieldRef: + description: |- + Selects a resource of the container: only resources limits and requests + (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported. + properties: + containerName: + description: 'Container name: required + for volumes, optional for env vars' + type: string + divisor: + anyOf: + - type: integer + - type: string + description: Specifies the output + format of the exposed resources, + defaults to "1" + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + resource: + description: 'Required: resource to + select' + type: string + required: + - resource + type: object + x-kubernetes-map-type: atomic + secretKeyRef: + description: Selects a key of a secret + in the pod's namespace + properties: + key: + description: The key of the secret + to select from. Must be a valid + secret key. + type: string + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + optional: + description: Specify whether the Secret + or its key must be defined + type: boolean + required: + - key + type: object + x-kubernetes-map-type: atomic + type: object + required: + - name type: object type: array - searches: + envFrom: description: |- - A list of DNS search domains for host-name lookup. - This will be appended to the base search paths generated from DNSPolicy. - Duplicated search paths will be removed. + List of sources to populate environment variables in the container. + The keys defined within a source must be a C_IDENTIFIER. All invalid keys + will be reported as an event when the container is starting. When a key exists in multiple + sources, the value associated with the last source will take precedence. + Values defined by an Env with a duplicate key will take precedence. + Cannot be updated. items: - type: string + description: EnvFromSource represents the source + of a set of ConfigMaps + properties: + configMapRef: + description: The ConfigMap to select from + properties: + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + optional: + description: Specify whether the ConfigMap + must be defined + type: boolean + type: object + x-kubernetes-map-type: atomic + prefix: + description: An optional identifier to prepend + to each key in the ConfigMap. Must be a + C_IDENTIFIER. + type: string + secretRef: + description: The Secret to select from + properties: + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + optional: + description: Specify whether the Secret + must be defined + type: boolean + type: object + x-kubernetes-map-type: atomic + type: object type: array - type: object - dnsPolicy: - description: |- - Set DNS policy for the pod. - Defaults to "ClusterFirst". - Valid values are 'ClusterFirstWithHostNet', 'ClusterFirst', 'Default' or 'None'. - DNS parameters given in DNSConfig will be merged with the policy selected with DNSPolicy. - To have DNS options set along with hostNetwork, you have to specify DNS policy - explicitly to 'ClusterFirstWithHostNet'. - type: string - enableServiceLinks: - description: |- - EnableServiceLinks indicates whether information about services should be injected into pod's - environment variables, matching the syntax of Docker links. - Optional: Defaults to true. - type: boolean - ephemeralContainers: - description: |- - List of ephemeral containers run in this pod. Ephemeral containers may be run in an existing - pod to perform user-initiated actions such as debugging. This list cannot be specified when - creating a pod, and it cannot be modified by updating the pod spec. In order to add an - ephemeral container to an existing pod, use the pod's ephemeralcontainers subresource. - items: - description: |- - An EphemeralContainer is a temporary container that you may add to an existing Pod for - user-initiated activities such as debugging. Ephemeral containers have no resource or - scheduling guarantees, and they will not be restarted when they exit or when a Pod is - removed or restarted. The kubelet may evict a Pod if an ephemeral container causes the - Pod to exceed its resource allocation. - - - To add an ephemeral container, use the ephemeralcontainers subresource of an existing - Pod. Ephemeral containers may not be removed or restarted. - properties: - args: - description: |- - Arguments to the entrypoint. - The image's CMD is used if this is not provided. - Variable references $(VAR_NAME) are expanded using the container's environment. If a variable - cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced - to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will - produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless - of whether the variable exists or not. Cannot be updated. - More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell - items: - type: string - type: array - command: - description: |- - Entrypoint array. Not executed within a shell. - The image's ENTRYPOINT is used if this is not provided. - Variable references $(VAR_NAME) are expanded using the container's environment. If a variable - cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced - to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will - produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless - of whether the variable exists or not. Cannot be updated. - More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell - items: - type: string - type: array - env: - description: |- - List of environment variables to set in the container. - Cannot be updated. - items: - description: - EnvVar represents an environment - variable present in a Container. + image: + description: |- + Container image name. + More info: https://kubernetes.io/docs/concepts/containers/images + This field is optional to allow higher level config management to default or override + container images in workload controllers like Deployments and StatefulSets. + type: string + imagePullPolicy: + description: |- + Image pull policy. + One of Always, Never, IfNotPresent. + Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/containers/images#updating-images + type: string + lifecycle: + description: |- + Actions that the management system should take in response to container lifecycle events. + Cannot be updated. + properties: + postStart: + description: |- + PostStart is called immediately after a container is created. If the handler fails, + the container is terminated and restarted according to its restart policy. + Other management of the container blocks until the hook completes. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks properties: - name: - description: - Name of the environment variable. - Must be a C_IDENTIFIER. - type: string - value: - description: |- - Variable references $(VAR_NAME) are expanded - using the previously defined environment variables in the container and - any service environment variables. If a variable cannot be resolved, - the reference in the input string will be unchanged. Double $$ are reduced - to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. - "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". - Escaped references will never be expanded, regardless of whether the variable - exists or not. - Defaults to "". - type: string - valueFrom: - description: - Source for the environment variable's - value. Cannot be used if value is not empty. + exec: + description: Exec specifies the action to + take. properties: - configMapKeyRef: - description: Selects a key of a ConfigMap. - properties: - key: - description: The key to select. - type: string - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - Specify whether the ConfigMap - or its key must be defined - type: boolean - required: - - key - type: object - x-kubernetes-map-type: atomic - fieldRef: + command: description: |- - Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['']`, `metadata.annotations['']`, - spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs. - properties: - apiVersion: - description: - Version of the schema - the FieldPath is written in terms - of, defaults to "v1". - type: string - fieldPath: - description: - Path of the field to - select in the specified API version. - type: string - required: - - fieldPath - type: object - x-kubernetes-map-type: atomic - resourceFieldRef: + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + httpGet: + description: HTTPGet specifies the http + request to perform. + properties: + host: description: |- - Selects a resource of the container: only resources limits and requests - (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported. - properties: - containerName: - description: - "Container name: required - for volumes, optional for env vars" - type: string - divisor: - anyOf: - - type: integer - - type: string - description: - Specifies the output - format of the exposed resources, - defaults to "1" - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ - x-kubernetes-int-or-string: true - resource: - description: - "Required: resource to - select" - type: string - required: - - resource - type: object - x-kubernetes-map-type: atomic - secretKeyRef: - description: - Selects a key of a secret - in the pod's namespace - properties: - key: - description: - The key of the secret - to select from. Must be a valid - secret key. - type: string - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - Specify whether the Secret - or its key must be defined - type: boolean - required: - - key - type: object - x-kubernetes-map-type: atomic + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in + the request. HTTP allows repeated + headers. + items: + description: HTTPHeader describes + a custom header to be used in HTTP + probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field + value + type: string + required: + - name + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + sleep: + description: Sleep represents the duration + that the container should sleep before + being terminated. + properties: + seconds: + description: Seconds is the number of + seconds to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for the backward compatibility. There are no validation of this field and + lifecycle hooks will fail in runtime when tcp handler is specified. + properties: + host: + description: 'Optional: Host name to + connect to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port type: object - required: - - name type: object - type: array - envFrom: - description: |- - List of sources to populate environment variables in the container. - The keys defined within a source must be a C_IDENTIFIER. All invalid keys - will be reported as an event when the container is starting. When a key exists in multiple - sources, the value associated with the last source will take precedence. - Values defined by an Env with a duplicate key will take precedence. - Cannot be updated. - items: - description: - EnvFromSource represents the source - of a set of ConfigMaps + preStop: + description: |- + PreStop is called immediately before a container is terminated due to an + API request or management event such as liveness/startup probe failure, + preemption, resource contention, etc. The handler is not called if the + container crashes or exits. The Pod's termination grace period countdown begins before the + PreStop hook is executed. Regardless of the outcome of the handler, the + container will eventually terminate within the Pod's termination grace + period (unless delayed by finalizers). Other management of the container blocks until the hook completes + or until the termination grace period is reached. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks properties: - configMapRef: - description: The ConfigMap to select from + exec: + description: Exec specifies the action to + take. properties: - name: + command: description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - Specify whether the ConfigMap - must be defined - type: boolean + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array type: object - x-kubernetes-map-type: atomic - prefix: - description: - An optional identifier to prepend - to each key in the ConfigMap. Must be a - C_IDENTIFIER. - type: string - secretRef: - description: The Secret to select from + httpGet: + description: HTTPGet specifies the http + request to perform. properties: - name: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in + the request. HTTP allows repeated + headers. + items: + description: HTTPHeader describes + a custom header to be used in HTTP + probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field + value + type: string + required: + - name + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? + Scheme to use for connecting to the host. + Defaults to HTTP. type: string - optional: - description: - Specify whether the Secret - must be defined - type: boolean + required: + - port type: object - x-kubernetes-map-type: atomic + sleep: + description: Sleep represents the duration + that the container should sleep before + being terminated. + properties: + seconds: + description: Seconds is the number of + seconds to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for the backward compatibility. There are no validation of this field and + lifecycle hooks will fail in runtime when tcp handler is specified. + properties: + host: + description: 'Optional: Host name to + connect to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + type: object + type: object + livenessProbe: + description: |- + Periodic probe of container liveness. + Container will be restarted if the probe fails. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies the action to take. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies an action involving + a GRPC port. + properties: + port: + description: Port number of the gRPC service. + Number must be in the range 1 to 65535. + format: int32 + type: integer + service: + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port type: object - type: array - image: - description: |- - Container image name. - More info: https://kubernetes.io/docs/concepts/containers/images - type: string - imagePullPolicy: - description: |- - Image pull policy. - One of Always, Never, IfNotPresent. - Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. - Cannot be updated. - More info: https://kubernetes.io/docs/concepts/containers/images#updating-images - type: string - lifecycle: - description: - Lifecycle is not allowed for ephemeral - containers. - properties: - postStart: - description: |- - PostStart is called immediately after a container is created. If the handler fails, - the container is terminated and restarted according to its restart policy. - Other management of the container blocks until the hook completes. - More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks - properties: - exec: - description: - Exec specifies the action to - take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - httpGet: - description: - HTTPGet specifies the http - request to perform. - properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in - the request. HTTP allows repeated - headers. - items: - description: - HTTPHeader describes - a custom header to be used in HTTP - probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: - The header field - value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: - description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. - type: string - required: - - port - type: object - sleep: - description: - Sleep represents the duration - that the container should sleep before - being terminated. - properties: - seconds: - description: - Seconds is the number of - seconds to sleep. - format: int64 - type: integer - required: - - seconds - type: object - tcpSocket: - description: |- - Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept - for the backward compatibility. There are no validation of this field and - lifecycle hooks will fail in runtime when tcp handler is specified. - properties: - host: - description: - "Optional: Host name to - connect to, defaults to the pod IP." - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - required: - - port - type: object - type: object - preStop: - description: |- - PreStop is called immediately before a container is terminated due to an - API request or management event such as liveness/startup probe failure, - preemption, resource contention, etc. The handler is not called if the - container crashes or exits. The Pod's termination grace period countdown begins before the - PreStop hook is executed. Regardless of the outcome of the handler, the - container will eventually terminate within the Pod's termination grace - period (unless delayed by finalizers). Other management of the container blocks until the hook completes - or until the termination grace period is reached. - More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks - properties: - exec: - description: - Exec specifies the action to - take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - httpGet: - description: - HTTPGet specifies the http - request to perform. + httpGet: + description: HTTPGet specifies the http request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the + request. HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in - the request. HTTP allows repeated - headers. - items: - description: - HTTPHeader describes - a custom header to be used in HTTP - probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: - The header field - value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: + name: description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. type: string - required: - - port - type: object - sleep: - description: - Sleep represents the duration - that the container should sleep before - being terminated. - properties: - seconds: - description: - Seconds is the number of - seconds to sleep. - format: int64 - type: integer - required: - - seconds - type: object - tcpSocket: - description: |- - Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept - for the backward compatibility. There are no validation of this field and - lifecycle hooks will fail in runtime when tcp handler is specified. - properties: - host: - description: - "Optional: Host name to - connect to, defaults to the pod IP." + value: + description: The header field value type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true required: - - port + - name + - value type: object - type: object - type: object - livenessProbe: - description: - Probes are not allowed for ephemeral - containers. + type: array + path: + description: Path to access on the HTTP + server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies an action involving + a TCP port. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + name: + description: |- + Name of the container specified as a DNS_LABEL. + Each container in a pod must have a unique name (DNS_LABEL). + Cannot be updated. + type: string + ports: + description: |- + List of ports to expose from the container. Not specifying a port here + DOES NOT prevent that port from being exposed. Any port which is + listening on the default "0.0.0.0" address inside a container will be + accessible from the network. + Modifying this array with strategic merge patch may corrupt the data. + For more information See https://github.com/kubernetes/kubernetes/issues/108255. + Cannot be updated. + items: + description: ContainerPort represents a network + port in a single container. properties: - exec: - description: Exec specifies the action to take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - failureThreshold: - description: |- - Minimum consecutive failures for the probe to be considered failed after having succeeded. - Defaults to 3. Minimum value is 1. - format: int32 - type: integer - grpc: - description: - GRPC specifies an action involving - a GRPC port. - properties: - port: - description: - Port number of the gRPC service. - Number must be in the range 1 to 65535. - format: int32 - type: integer - service: - description: |- - Service is the name of the service to place in the gRPC HealthCheckRequest - (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). - - - If this is not specified, the default behavior is defined by gRPC. - type: string - required: - - port - type: object - httpGet: - description: - HTTPGet specifies the http request - to perform. - properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in the - request. HTTP allows repeated headers. - items: - description: - HTTPHeader describes a custom - header to be used in HTTP probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: The header field value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: - description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. - type: string - required: - - port - type: object - initialDelaySeconds: - description: |- - Number of seconds after the container has started before liveness probes are initiated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - periodSeconds: + containerPort: description: |- - How often (in seconds) to perform the probe. - Default to 10 seconds. Minimum value is 1. + Number of port to expose on the pod's IP address. + This must be a valid port number, 0 < x < 65536. format: int32 type: integer - successThreshold: + hostIP: + description: What host IP to bind the external + port to. + type: string + hostPort: description: |- - Minimum consecutive successes for the probe to be considered successful after having failed. - Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + Number of port to expose on the host. + If specified, this must be a valid port number, 0 < x < 65536. + If HostNetwork is specified, this must match ContainerPort. + Most containers do not need this. format: int32 type: integer - tcpSocket: - description: - TCPSocket specifies an action involving - a TCP port. - properties: - host: - description: - "Optional: Host name to connect - to, defaults to the pod IP." - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - required: - - port - type: object - terminationGracePeriodSeconds: + name: description: |- - Optional duration in seconds the pod needs to terminate gracefully upon probe failure. - The grace period is the duration in seconds after the processes running in the pod are sent - a termination signal and the time when the processes are forcibly halted with a kill signal. - Set this value longer than the expected cleanup time for your process. - If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this - value overrides the value provided by the pod spec. - Value must be non-negative integer. The value zero indicates stop immediately via - the kill signal (no opportunity to shut down). - This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. - Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. - format: int64 - type: integer - timeoutSeconds: + If specified, this must be an IANA_SVC_NAME and unique within the pod. Each + named port in a pod must have a unique name. Name for the port that can be + referred to by services. + type: string + protocol: + default: TCP description: |- - Number of seconds after which the probe times out. - Defaults to 1 second. Minimum value is 1. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer + Protocol for port. Must be UDP, TCP, or SCTP. + Defaults to "TCP". + type: string + required: + - containerPort type: object - name: - description: |- - Name of the ephemeral container specified as a DNS_LABEL. - This name must be unique among all containers, init containers and ephemeral containers. - type: string - ports: - description: - Ports are not allowed for ephemeral - containers. - items: - description: - ContainerPort represents a network - port in a single container. + type: array + x-kubernetes-list-map-keys: + - containerPort + - protocol + x-kubernetes-list-type: map + readinessProbe: + description: |- + Periodic probe of container service readiness. + Container will be removed from service endpoints if the probe fails. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies the action to take. properties: - containerPort: + command: description: |- - Number of port to expose on the pod's IP address. - This must be a valid port number, 0 < x < 65536. + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies an action involving + a GRPC port. + properties: + port: + description: Port number of the gRPC service. + Number must be in the range 1 to 65535. format: int32 type: integer - hostIP: - description: - What host IP to bind the external - port to. - type: string - hostPort: + service: description: |- - Number of port to expose on the host. - If specified, this must be a valid port number, 0 < x < 65536. - If HostNetwork is specified, this must match ContainerPort. - Most containers do not need this. - format: int32 - type: integer - name: + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies the http request + to perform. + properties: + host: description: |- - If specified, this must be an IANA_SVC_NAME and unique within the pod. Each - named port in a pod must have a unique name. Name for the port that can be - referred to by services. + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the + request. HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. type: string - protocol: - default: TCP + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: description: |- - Protocol for port. Must be UDP, TCP, or SCTP. - Defaults to "TCP". + Scheme to use for connecting to the host. + Defaults to HTTP. type: string required: - - containerPort + - port type: object - type: array - x-kubernetes-list-map-keys: - - containerPort - - protocol - x-kubernetes-list-type: map - readinessProbe: - description: - Probes are not allowed for ephemeral - containers. + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies an action involving + a TCP port. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + resizePolicy: + description: Resources resize policy for the container. + items: + description: ContainerResizePolicy represents + resource resize policy for the container. properties: - exec: - description: Exec specifies the action to take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - failureThreshold: + resourceName: description: |- - Minimum consecutive failures for the probe to be considered failed after having succeeded. - Defaults to 3. Minimum value is 1. - format: int32 - type: integer - grpc: - description: - GRPC specifies an action involving - a GRPC port. - properties: - port: - description: - Port number of the gRPC service. - Number must be in the range 1 to 65535. - format: int32 - type: integer - service: - description: |- - Service is the name of the service to place in the gRPC HealthCheckRequest - (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + Name of the resource to which this resource resize policy applies. + Supported values: cpu, memory. + type: string + restartPolicy: + description: |- + Restart policy to apply when specified resource is resized. + If not specified, it defaults to NotRequired. + type: string + required: + - resourceName + - restartPolicy + type: object + type: array + x-kubernetes-list-type: atomic + resources: + description: |- + Compute Resources required by this container. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + properties: + claims: + description: |- + Claims lists the names of resources, defined in spec.resourceClaims, + that are used by this container. - If this is not specified, the default behavior is defined by gRPC. - type: string - required: - - port - type: object - httpGet: - description: - HTTPGet specifies the http request - to perform. + This is an alpha field and requires enabling the + DynamicResourceAllocation feature gate. + + + This field is immutable. It can only be set for containers. + items: + description: ResourceClaim references one + entry in PodSpec.ResourceClaims. properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in the - request. HTTP allows repeated headers. - items: - description: - HTTPHeader describes a custom - header to be used in HTTP probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: The header field value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: + name: description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. + Name must match the name of one entry in pod.spec.resourceClaims of + the Pod where this field is used. It makes that resource available + inside a container. type: string required: - - port + - name type: object - initialDelaySeconds: - description: |- - Number of seconds after the container has started before liveness probes are initiated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - periodSeconds: - description: |- - How often (in seconds) to perform the probe. - Default to 10 seconds. Minimum value is 1. - format: int32 - type: integer - successThreshold: - description: |- - Minimum consecutive successes for the probe to be considered successful after having failed. - Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. - format: int32 - type: integer - tcpSocket: - description: - TCPSocket specifies an action involving - a TCP port. - properties: - host: - description: - "Optional: Host name to connect - to, defaults to the pod IP." + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + limits: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Limits describes the maximum amount of compute resources allowed. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + requests: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Requests describes the minimum amount of compute resources required. + If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, + otherwise to an implementation-defined value. Requests cannot exceed Limits. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + type: object + restartPolicy: + description: |- + RestartPolicy defines the restart behavior of individual containers in a pod. + This field may only be set for init containers, and the only allowed value is "Always". + For non-init containers or when this field is not specified, + the restart behavior is defined by the Pod's restart policy and the container type. + Setting the RestartPolicy as "Always" for the init container will have the following effect: + this init container will be continually restarted on + exit until all regular containers have terminated. Once all regular + containers have completed, all init containers with restartPolicy "Always" + will be shut down. This lifecycle differs from normal init containers and + is often referred to as a "sidecar" container. Although this init + container still starts in the init container sequence, it does not wait + for the container to complete before proceeding to the next init + container. Instead, the next init container starts immediately after this + init container is started, or after any startupProbe has successfully + completed. + type: string + securityContext: + description: |- + SecurityContext defines the security options the container should be run with. + If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. + More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/ + properties: + allowPrivilegeEscalation: + description: |- + AllowPrivilegeEscalation controls whether a process can gain more + privileges than its parent process. This bool directly controls if + the no_new_privs flag will be set on the container process. + AllowPrivilegeEscalation is true always when the container is: + 1) run as Privileged + 2) has CAP_SYS_ADMIN + Note that this field cannot be set when spec.os.name is windows. + type: boolean + capabilities: + description: |- + The capabilities to add/drop when running containers. + Defaults to the default set of capabilities granted by the container runtime. + Note that this field cannot be set when spec.os.name is windows. + properties: + add: + description: Added capabilities + items: + description: Capability represent POSIX + capabilities type type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - required: - - port - type: object - terminationGracePeriodSeconds: - description: |- - Optional duration in seconds the pod needs to terminate gracefully upon probe failure. - The grace period is the duration in seconds after the processes running in the pod are sent - a termination signal and the time when the processes are forcibly halted with a kill signal. - Set this value longer than the expected cleanup time for your process. - If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this - value overrides the value provided by the pod spec. - Value must be non-negative integer. The value zero indicates stop immediately via - the kill signal (no opportunity to shut down). - This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. - Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. - format: int64 - type: integer - timeoutSeconds: - description: |- - Number of seconds after which the probe times out. - Defaults to 1 second. Minimum value is 1. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - type: object - resizePolicy: - description: Resources resize policy for the container. - items: - description: - ContainerResizePolicy represents - resource resize policy for the container. + type: array + drop: + description: Removed capabilities + items: + description: Capability represent POSIX + capabilities type + type: string + type: array + type: object + privileged: + description: |- + Run container in privileged mode. + Processes in privileged containers are essentially equivalent to root on the host. + Defaults to false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + procMount: + description: |- + procMount denotes the type of proc mount to use for the containers. + The default is DefaultProcMount which uses the container runtime defaults for + readonly paths and masked paths. + This requires the ProcMountType feature flag to be enabled. + Note that this field cannot be set when spec.os.name is windows. + type: string + readOnlyRootFilesystem: + description: |- + Whether this container has a read-only root filesystem. + Default is false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + runAsGroup: + description: |- + The GID to run the entrypoint of the container process. + Uses runtime default if unset. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + runAsNonRoot: + description: |- + Indicates that the container must run as a non-root user. + If true, the Kubelet will validate the image at runtime to ensure that it + does not run as UID 0 (root) and fail to start the container if it does. + If unset or false, no such validation will be performed. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: boolean + runAsUser: + description: |- + The UID to run the entrypoint of the container process. + Defaults to user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + seLinuxOptions: + description: |- + The SELinux context to be applied to the container. + If unspecified, the container runtime will allocate a random SELinux context for each + container. May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + properties: + level: + description: Level is SELinux level label + that applies to the container. + type: string + role: + description: Role is a SELinux role label + that applies to the container. + type: string + type: + description: Type is a SELinux type label + that applies to the container. + type: string + user: + description: User is a SELinux user label + that applies to the container. + type: string + type: object + seccompProfile: + description: |- + The seccomp options to use by this container. If seccomp options are + provided at both the pod & container level, the container options + override the pod options. + Note that this field cannot be set when spec.os.name is windows. properties: - resourceName: + localhostProfile: description: |- - Name of the resource to which this resource resize policy applies. - Supported values: cpu, memory. + localhostProfile indicates a profile defined in a file on the node should be used. + The profile must be preconfigured on the node to work. + Must be a descending path, relative to the kubelet's configured seccomp profile location. + Must be set if type is "Localhost". Must NOT be set for any other type. type: string - restartPolicy: + type: description: |- - Restart policy to apply when specified resource is resized. - If not specified, it defaults to NotRequired. + type indicates which kind of seccomp profile will be applied. + Valid options are: + + + Localhost - a profile defined in a file on the node should be used. + RuntimeDefault - the container runtime default profile should be used. + Unconfined - no profile should be applied. type: string required: - - resourceName - - restartPolicy + - type type: object - type: array - x-kubernetes-list-type: atomic - resources: - description: |- - Resources are not allowed for ephemeral containers. Ephemeral containers use spare resources - already allocated to the pod. - properties: - claims: - description: |- - Claims lists the names of resources, defined in spec.resourceClaims, - that are used by this container. - - - This is an alpha field and requires enabling the - DynamicResourceAllocation feature gate. + windowsOptions: + description: |- + The Windows specific settings applied to all containers. + If unspecified, the options from the PodSecurityContext will be used. + If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is linux. + properties: + gmsaCredentialSpec: + description: |- + GMSACredentialSpec is where the GMSA admission webhook + (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the + GMSA credential spec named by the GMSACredentialSpecName field. + type: string + gmsaCredentialSpecName: + description: GMSACredentialSpecName is the + name of the GMSA credential spec to use. + type: string + hostProcess: + description: |- + HostProcess determines if a container should be run as a 'Host Process' container. + All of a Pod's containers must have the same effective HostProcess value + (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). + In addition, if HostProcess is true then HostNetwork must also be set to true. + type: boolean + runAsUserName: + description: |- + The UserName in Windows to run the entrypoint of the container process. + Defaults to the user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: string + type: object + type: object + startupProbe: + description: |- + StartupProbe indicates that the Pod has successfully initialized. + If specified, no other probes are executed until this completes successfully. + If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. + This can be used to provide different probe parameters at the beginning of a Pod's lifecycle, + when it might take a long time to load data or warm a cache, than during steady-state operation. + This cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies the action to take. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies an action involving + a GRPC port. + properties: + port: + description: Port number of the gRPC service. + Number must be in the range 1 to 65535. + format: int32 + type: integer + service: + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). - This field is immutable. It can only be set for containers. - items: - description: - ResourceClaim references one - entry in PodSpec.ResourceClaims. - properties: - name: - description: |- - Name must match the name of one entry in pod.spec.resourceClaims of - the Pod where this field is used. It makes that resource available - inside a container. - type: string - required: + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies the http request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the + request. HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: - name - type: object - type: array - x-kubernetes-list-map-keys: - - name - x-kubernetes-list-type: map - limits: - additionalProperties: + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. + type: string + port: anyOf: - - type: integer - - type: string - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. x-kubernetes-int-or-string: true - description: |- - Limits describes the maximum amount of compute resources allowed. - More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ - type: object - requests: - additionalProperties: + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies an action involving + a TCP port. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: anyOf: - - type: integer - - type: string - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. x-kubernetes-int-or-string: true - description: |- - Requests describes the minimum amount of compute resources required. - If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, - otherwise to an implementation-defined value. Requests cannot exceed Limits. - More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ - type: object + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + stdin: + description: |- + Whether this container should allocate a buffer for stdin in the container runtime. If this + is not set, reads from stdin in the container will always result in EOF. + Default is false. + type: boolean + stdinOnce: + description: |- + Whether the container runtime should close the stdin channel after it has been opened by + a single attach. When stdin is true the stdin stream will remain open across multiple attach + sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the + first client attaches to stdin, and then remains open and accepts data until the client disconnects, + at which time stdin is closed and remains closed until the container is restarted. If this + flag is false, a container processes that reads from stdin will never receive an EOF. + Default is false + type: boolean + terminationMessagePath: + description: |- + Optional: Path at which the file to which the container's termination message + will be written is mounted into the container's filesystem. + Message written is intended to be brief final status, such as an assertion failure message. + Will be truncated by the node if greater than 4096 bytes. The total message length across + all containers will be limited to 12kb. + Defaults to /dev/termination-log. + Cannot be updated. + type: string + terminationMessagePolicy: + description: |- + Indicate how the termination message should be populated. File will use the contents of + terminationMessagePath to populate the container status message on both success and failure. + FallbackToLogsOnError will use the last chunk of container log output if the termination + message file is empty and the container exited with an error. + The log output is limited to 2048 bytes or 80 lines, whichever is smaller. + Defaults to File. + Cannot be updated. + type: string + tty: + description: |- + Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. + Default is false. + type: boolean + volumeDevices: + description: volumeDevices is the list of block + devices to be used by the container. + items: + description: volumeDevice describes a mapping + of a raw block device within a container. + properties: + devicePath: + description: devicePath is the path inside + of the container that the device will be + mapped to. + type: string + name: + description: name must match the name of a + persistentVolumeClaim in the pod + type: string + required: + - devicePath + - name type: object - restartPolicy: - description: |- - Restart policy for the container to manage the restart behavior of each - container within a pod. - This may only be set for init containers. You cannot set this field on - ephemeral containers. - type: string - securityContext: - description: |- - Optional: SecurityContext defines the security options the ephemeral container should be run with. - If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. + type: array + volumeMounts: + description: |- + Pod volumes to mount into the container's filesystem. + Cannot be updated. + items: + description: VolumeMount describes a mounting + of a Volume within a container. properties: - allowPrivilegeEscalation: + mountPath: description: |- - AllowPrivilegeEscalation controls whether a process can gain more - privileges than its parent process. This bool directly controls if - the no_new_privs flag will be set on the container process. - AllowPrivilegeEscalation is true always when the container is: - 1) run as Privileged - 2) has CAP_SYS_ADMIN - Note that this field cannot be set when spec.os.name is windows. - type: boolean - capabilities: + Path within the container at which the volume should be mounted. Must + not contain ':'. + type: string + mountPropagation: description: |- - The capabilities to add/drop when running containers. - Defaults to the default set of capabilities granted by the container runtime. - Note that this field cannot be set when spec.os.name is windows. - properties: - add: - description: Added capabilities - items: - description: - Capability represent POSIX - capabilities type - type: string - type: array - drop: - description: Removed capabilities - items: - description: - Capability represent POSIX - capabilities type - type: string - type: array - type: object - privileged: + mountPropagation determines how mounts are propagated from the host + to container and the other way around. + When not set, MountPropagationNone is used. + This field is beta in 1.10. + type: string + name: + description: This must match the Name of a + Volume. + type: string + readOnly: description: |- - Run container in privileged mode. - Processes in privileged containers are essentially equivalent to root on the host. + Mounted read-only if true, read-write otherwise (false or unspecified). Defaults to false. - Note that this field cannot be set when spec.os.name is windows. type: boolean - procMount: + subPath: description: |- - procMount denotes the type of proc mount to use for the containers. - The default is DefaultProcMount which uses the container runtime defaults for - readonly paths and masked paths. - This requires the ProcMountType feature flag to be enabled. - Note that this field cannot be set when spec.os.name is windows. + Path within the volume from which the container's volume should be mounted. + Defaults to "" (volume's root). type: string - readOnlyRootFilesystem: - description: |- - Whether this container has a read-only root filesystem. - Default is false. - Note that this field cannot be set when spec.os.name is windows. - type: boolean - runAsGroup: - description: |- - The GID to run the entrypoint of the container process. - Uses runtime default if unset. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is windows. - format: int64 - type: integer - runAsNonRoot: - description: |- - Indicates that the container must run as a non-root user. - If true, the Kubelet will validate the image at runtime to ensure that it - does not run as UID 0 (root) and fail to start the container if it does. - If unset or false, no such validation will be performed. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - type: boolean - runAsUser: - description: |- - The UID to run the entrypoint of the container process. - Defaults to user specified in image metadata if unspecified. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is windows. - format: int64 - type: integer - seLinuxOptions: - description: |- - The SELinux context to be applied to the container. - If unspecified, the container runtime will allocate a random SELinux context for each - container. May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is windows. - properties: - level: - description: - Level is SELinux level label - that applies to the container. - type: string - role: - description: - Role is a SELinux role label - that applies to the container. - type: string - type: - description: - Type is a SELinux type label - that applies to the container. - type: string - user: - description: - User is a SELinux user label - that applies to the container. - type: string - type: object - seccompProfile: + subPathExpr: description: |- - The seccomp options to use by this container. If seccomp options are - provided at both the pod & container level, the container options - override the pod options. - Note that this field cannot be set when spec.os.name is windows. - properties: - localhostProfile: - description: |- - localhostProfile indicates a profile defined in a file on the node should be used. - The profile must be preconfigured on the node to work. - Must be a descending path, relative to the kubelet's configured seccomp profile location. - Must be set if type is "Localhost". Must NOT be set for any other type. - type: string - type: - description: |- - type indicates which kind of seccomp profile will be applied. - Valid options are: + Expanded path within the volume from which the container's volume should be mounted. + Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. + Defaults to "" (volume's root). + SubPathExpr and SubPath are mutually exclusive. + type: string + required: + - mountPath + - name + type: object + type: array + workingDir: + description: |- + Container's working directory. + If not specified, the container runtime's default will be used, which + might be configured in the container image. + Cannot be updated. + type: string + required: + - name + type: object + type: array + dnsConfig: + description: |- + Specifies the DNS parameters of a pod. + Parameters specified here will be merged to the generated DNS + configuration based on DNSPolicy. + properties: + nameservers: + description: |- + A list of DNS name server IP addresses. + This will be appended to the base nameservers generated from DNSPolicy. + Duplicated nameservers will be removed. + items: + type: string + type: array + options: + description: |- + A list of DNS resolver options. + This will be merged with the base options generated from DNSPolicy. + Duplicated entries will be removed. Resolution options given in Options + will override those that appear in the base DNSPolicy. + items: + description: PodDNSConfigOption defines DNS resolver + options of a pod. + properties: + name: + description: Required. + type: string + value: + type: string + type: object + type: array + searches: + description: |- + A list of DNS search domains for host-name lookup. + This will be appended to the base search paths generated from DNSPolicy. + Duplicated search paths will be removed. + items: + type: string + type: array + type: object + dnsPolicy: + description: |- + Set DNS policy for the pod. + Defaults to "ClusterFirst". + Valid values are 'ClusterFirstWithHostNet', 'ClusterFirst', 'Default' or 'None'. + DNS parameters given in DNSConfig will be merged with the policy selected with DNSPolicy. + To have DNS options set along with hostNetwork, you have to specify DNS policy + explicitly to 'ClusterFirstWithHostNet'. + type: string + enableServiceLinks: + description: |- + EnableServiceLinks indicates whether information about services should be injected into pod's + environment variables, matching the syntax of Docker links. + Optional: Defaults to true. + type: boolean + ephemeralContainers: + description: |- + List of ephemeral containers run in this pod. Ephemeral containers may be run in an existing + pod to perform user-initiated actions such as debugging. This list cannot be specified when + creating a pod, and it cannot be modified by updating the pod spec. In order to add an + ephemeral container to an existing pod, use the pod's ephemeralcontainers subresource. + items: + description: |- + An EphemeralContainer is a temporary container that you may add to an existing Pod for + user-initiated activities such as debugging. Ephemeral containers have no resource or + scheduling guarantees, and they will not be restarted when they exit or when a Pod is + removed or restarted. The kubelet may evict a Pod if an ephemeral container causes the + Pod to exceed its resource allocation. - Localhost - a profile defined in a file on the node should be used. - RuntimeDefault - the container runtime default profile should be used. - Unconfined - no profile should be applied. - type: string - required: - - type - type: object - windowsOptions: + To add an ephemeral container, use the ephemeralcontainers subresource of an existing + Pod. Ephemeral containers may not be removed or restarted. + properties: + args: + description: |- + Arguments to the entrypoint. + The image's CMD is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: + type: string + type: array + command: + description: |- + Entrypoint array. Not executed within a shell. + The image's ENTRYPOINT is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: + type: string + type: array + env: + description: |- + List of environment variables to set in the container. + Cannot be updated. + items: + description: EnvVar represents an environment + variable present in a Container. + properties: + name: + description: Name of the environment variable. + Must be a C_IDENTIFIER. + type: string + value: description: |- - The Windows specific settings applied to all containers. - If unspecified, the options from the PodSecurityContext will be used. - If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is linux. - properties: - gmsaCredentialSpec: - description: |- - GMSACredentialSpec is where the GMSA admission webhook - (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the - GMSA credential spec named by the GMSACredentialSpecName field. - type: string - gmsaCredentialSpecName: - description: - GMSACredentialSpecName is the - name of the GMSA credential spec to use. - type: string - hostProcess: + Variable references $(VAR_NAME) are expanded + using the previously defined environment variables in the container and + any service environment variables. If a variable cannot be resolved, + the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. + "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". + Escaped references will never be expanded, regardless of whether the variable + exists or not. + Defaults to "". + type: string + valueFrom: + description: Source for the environment variable's + value. Cannot be used if value is not empty. + properties: + configMapKeyRef: + description: Selects a key of a ConfigMap. + properties: + key: + description: The key to select. + type: string + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + optional: + description: Specify whether the ConfigMap + or its key must be defined + type: boolean + required: + - key + type: object + x-kubernetes-map-type: atomic + fieldRef: description: |- - HostProcess determines if a container should be run as a 'Host Process' container. - All of a Pod's containers must have the same effective HostProcess value - (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). - In addition, if HostProcess is true then HostNetwork must also be set to true. - type: boolean - runAsUserName: + Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['']`, `metadata.annotations['']`, + spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs. + properties: + apiVersion: + description: Version of the schema + the FieldPath is written in terms + of, defaults to "v1". + type: string + fieldPath: + description: Path of the field to + select in the specified API version. + type: string + required: + - fieldPath + type: object + x-kubernetes-map-type: atomic + resourceFieldRef: description: |- - The UserName in Windows to run the entrypoint of the container process. - Defaults to the user specified in image metadata if unspecified. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - type: string + Selects a resource of the container: only resources limits and requests + (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported. + properties: + containerName: + description: 'Container name: required + for volumes, optional for env vars' + type: string + divisor: + anyOf: + - type: integer + - type: string + description: Specifies the output + format of the exposed resources, + defaults to "1" + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + resource: + description: 'Required: resource to + select' + type: string + required: + - resource + type: object + x-kubernetes-map-type: atomic + secretKeyRef: + description: Selects a key of a secret + in the pod's namespace + properties: + key: + description: The key of the secret + to select from. Must be a valid + secret key. + type: string + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + optional: + description: Specify whether the Secret + or its key must be defined + type: boolean + required: + - key + type: object + x-kubernetes-map-type: atomic type: object + required: + - name type: object - startupProbe: - description: - Probes are not allowed for ephemeral - containers. + type: array + envFrom: + description: |- + List of sources to populate environment variables in the container. + The keys defined within a source must be a C_IDENTIFIER. All invalid keys + will be reported as an event when the container is starting. When a key exists in multiple + sources, the value associated with the last source will take precedence. + Values defined by an Env with a duplicate key will take precedence. + Cannot be updated. + items: + description: EnvFromSource represents the source + of a set of ConfigMaps properties: - exec: - description: Exec specifies the action to take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - failureThreshold: - description: |- - Minimum consecutive failures for the probe to be considered failed after having succeeded. - Defaults to 3. Minimum value is 1. - format: int32 - type: integer - grpc: - description: - GRPC specifies an action involving - a GRPC port. + configMapRef: + description: The ConfigMap to select from properties: - port: - description: - Port number of the gRPC service. - Number must be in the range 1 to 65535. - format: int32 - type: integer - service: + name: description: |- - Service is the name of the service to place in the gRPC HealthCheckRequest - (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). - - - If this is not specified, the default behavior is defined by gRPC. + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? type: string - required: - - port + optional: + description: Specify whether the ConfigMap + must be defined + type: boolean type: object - httpGet: - description: - HTTPGet specifies the http request - to perform. + x-kubernetes-map-type: atomic + prefix: + description: An optional identifier to prepend + to each key in the ConfigMap. Must be a + C_IDENTIFIER. + type: string + secretRef: + description: The Secret to select from properties: - host: + name: description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? type: string - httpHeaders: - description: - Custom headers to set in the - request. HTTP allows repeated headers. - items: - description: - HTTPHeader describes a custom - header to be used in HTTP probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: The header field value - type: string - required: + optional: + description: Specify whether the Secret + must be defined + type: boolean + type: object + x-kubernetes-map-type: atomic + type: object + type: array + image: + description: |- + Container image name. + More info: https://kubernetes.io/docs/concepts/containers/images + type: string + imagePullPolicy: + description: |- + Image pull policy. + One of Always, Never, IfNotPresent. + Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/containers/images#updating-images + type: string + lifecycle: + description: Lifecycle is not allowed for ephemeral + containers. + properties: + postStart: + description: |- + PostStart is called immediately after a container is created. If the handler fails, + the container is terminated and restarted according to its restart policy. + Other management of the container blocks until the hook completes. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks + properties: + exec: + description: Exec specifies the action to + take. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + httpGet: + description: HTTPGet specifies the http + request to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in + the request. HTTP allows repeated + headers. + items: + description: HTTPHeader describes + a custom header to be used in HTTP + probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field + value + type: string + required: - name - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. - type: string - port: - anyOf: + type: object + type: array + path: + description: Path to access on the HTTP + server. + type: string + port: + anyOf: - type: integer - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: - description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. - type: string - required: + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: - port - type: object - initialDelaySeconds: - description: |- - Number of seconds after the container has started before liveness probes are initiated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - periodSeconds: + type: object + sleep: + description: Sleep represents the duration + that the container should sleep before + being terminated. + properties: + seconds: + description: Seconds is the number of + seconds to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for the backward compatibility. There are no validation of this field and + lifecycle hooks will fail in runtime when tcp handler is specified. + properties: + host: + description: 'Optional: Host name to + connect to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + type: object + preStop: + description: |- + PreStop is called immediately before a container is terminated due to an + API request or management event such as liveness/startup probe failure, + preemption, resource contention, etc. The handler is not called if the + container crashes or exits. The Pod's termination grace period countdown begins before the + PreStop hook is executed. Regardless of the outcome of the handler, the + container will eventually terminate within the Pod's termination grace + period (unless delayed by finalizers). Other management of the container blocks until the hook completes + or until the termination grace period is reached. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks + properties: + exec: + description: Exec specifies the action to + take. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + httpGet: + description: HTTPGet specifies the http + request to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in + the request. HTTP allows repeated + headers. + items: + description: HTTPHeader describes + a custom header to be used in HTTP + probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field + value + type: string + required: + - name + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + sleep: + description: Sleep represents the duration + that the container should sleep before + being terminated. + properties: + seconds: + description: Seconds is the number of + seconds to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for the backward compatibility. There are no validation of this field and + lifecycle hooks will fail in runtime when tcp handler is specified. + properties: + host: + description: 'Optional: Host name to + connect to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + type: object + type: object + livenessProbe: + description: Probes are not allowed for ephemeral + containers. + properties: + exec: + description: Exec specifies the action to take. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies an action involving + a GRPC port. + properties: + port: + description: Port number of the gRPC service. + Number must be in the range 1 to 65535. + format: int32 + type: integer + service: + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies the http request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the + request. HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies an action involving + a TCP port. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + name: + description: |- + Name of the ephemeral container specified as a DNS_LABEL. + This name must be unique among all containers, init containers and ephemeral containers. + type: string + ports: + description: Ports are not allowed for ephemeral + containers. + items: + description: ContainerPort represents a network + port in a single container. + properties: + containerPort: description: |- - How often (in seconds) to perform the probe. - Default to 10 seconds. Minimum value is 1. + Number of port to expose on the pod's IP address. + This must be a valid port number, 0 < x < 65536. format: int32 type: integer - successThreshold: + hostIP: + description: What host IP to bind the external + port to. + type: string + hostPort: description: |- - Minimum consecutive successes for the probe to be considered successful after having failed. - Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + Number of port to expose on the host. + If specified, this must be a valid port number, 0 < x < 65536. + If HostNetwork is specified, this must match ContainerPort. + Most containers do not need this. format: int32 type: integer - tcpSocket: - description: - TCPSocket specifies an action involving - a TCP port. - properties: - host: - description: - "Optional: Host name to connect - to, defaults to the pod IP." - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - required: - - port - type: object - terminationGracePeriodSeconds: + name: description: |- - Optional duration in seconds the pod needs to terminate gracefully upon probe failure. - The grace period is the duration in seconds after the processes running in the pod are sent - a termination signal and the time when the processes are forcibly halted with a kill signal. - Set this value longer than the expected cleanup time for your process. - If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this - value overrides the value provided by the pod spec. - Value must be non-negative integer. The value zero indicates stop immediately via - the kill signal (no opportunity to shut down). - This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. - Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. - format: int64 - type: integer - timeoutSeconds: + If specified, this must be an IANA_SVC_NAME and unique within the pod. Each + named port in a pod must have a unique name. Name for the port that can be + referred to by services. + type: string + protocol: + default: TCP description: |- - Number of seconds after which the probe times out. - Defaults to 1 second. Minimum value is 1. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer + Protocol for port. Must be UDP, TCP, or SCTP. + Defaults to "TCP". + type: string + required: + - containerPort type: object - stdin: - description: |- - Whether this container should allocate a buffer for stdin in the container runtime. If this - is not set, reads from stdin in the container will always result in EOF. - Default is false. - type: boolean - stdinOnce: - description: |- - Whether the container runtime should close the stdin channel after it has been opened by - a single attach. When stdin is true the stdin stream will remain open across multiple attach - sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the - first client attaches to stdin, and then remains open and accepts data until the client disconnects, - at which time stdin is closed and remains closed until the container is restarted. If this - flag is false, a container processes that reads from stdin will never receive an EOF. - Default is false - type: boolean - targetContainerName: - description: |- - If set, the name of the container from PodSpec that this ephemeral container targets. - The ephemeral container will be run in the namespaces (IPC, PID, etc) of this container. - If not set then the ephemeral container uses the namespaces configured in the Pod spec. + type: array + x-kubernetes-list-map-keys: + - containerPort + - protocol + x-kubernetes-list-type: map + readinessProbe: + description: Probes are not allowed for ephemeral + containers. + properties: + exec: + description: Exec specifies the action to take. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies an action involving + a GRPC port. + properties: + port: + description: Port number of the gRPC service. + Number must be in the range 1 to 65535. + format: int32 + type: integer + service: + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). - The container runtime must implement support for this feature. If the runtime does not - support namespace targeting then the result of setting this field is undefined. - type: string - terminationMessagePath: - description: |- - Optional: Path at which the file to which the container's termination message - will be written is mounted into the container's filesystem. - Message written is intended to be brief final status, such as an assertion failure message. - Will be truncated by the node if greater than 4096 bytes. The total message length across - all containers will be limited to 12kb. - Defaults to /dev/termination-log. - Cannot be updated. - type: string - terminationMessagePolicy: - description: |- - Indicate how the termination message should be populated. File will use the contents of - terminationMessagePath to populate the container status message on both success and failure. - FallbackToLogsOnError will use the last chunk of container log output if the termination - message file is empty and the container exited with an error. - The log output is limited to 2048 bytes or 80 lines, whichever is smaller. - Defaults to File. - Cannot be updated. - type: string - tty: - description: |- - Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. - Default is false. - type: boolean - volumeDevices: - description: - volumeDevices is the list of block - devices to be used by the container. - items: - description: - volumeDevice describes a mapping - of a raw block device within a container. - properties: - devicePath: - description: - devicePath is the path inside - of the container that the device will be - mapped to. - type: string - name: - description: - name must match the name of a - persistentVolumeClaim in the pod + If this is not specified, the default behavior is defined by gRPC. type: string required: - - devicePath - - name + - port type: object - type: array - volumeMounts: - description: |- - Pod volumes to mount into the container's filesystem. Subpath mounts are not allowed for ephemeral containers. - Cannot be updated. - items: - description: - VolumeMount describes a mounting - of a Volume within a container. + httpGet: + description: HTTPGet specifies the http request + to perform. properties: - mountPath: + host: description: |- - Path within the container at which the volume should be mounted. Must - not contain ':'. + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the + request. HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. type: string - mountPropagation: + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: description: |- - mountPropagation determines how mounts are propagated from the host - to container and the other way around. - When not set, MountPropagationNone is used. - This field is beta in 1.10. + Scheme to use for connecting to the host. + Defaults to HTTP. type: string - name: - description: - This must match the Name of a - Volume. + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies an action involving + a TCP port. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' type: string - readOnly: + port: + anyOf: + - type: integer + - type: string description: |- - Mounted read-only if true, read-write otherwise (false or unspecified). - Defaults to false. - type: boolean - subPath: + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + resizePolicy: + description: Resources resize policy for the container. + items: + description: ContainerResizePolicy represents + resource resize policy for the container. + properties: + resourceName: + description: |- + Name of the resource to which this resource resize policy applies. + Supported values: cpu, memory. + type: string + restartPolicy: + description: |- + Restart policy to apply when specified resource is resized. + If not specified, it defaults to NotRequired. + type: string + required: + - resourceName + - restartPolicy + type: object + type: array + x-kubernetes-list-type: atomic + resources: + description: |- + Resources are not allowed for ephemeral containers. Ephemeral containers use spare resources + already allocated to the pod. + properties: + claims: + description: |- + Claims lists the names of resources, defined in spec.resourceClaims, + that are used by this container. + + + This is an alpha field and requires enabling the + DynamicResourceAllocation feature gate. + + + This field is immutable. It can only be set for containers. + items: + description: ResourceClaim references one + entry in PodSpec.ResourceClaims. + properties: + name: + description: |- + Name must match the name of one entry in pod.spec.resourceClaims of + the Pod where this field is used. It makes that resource available + inside a container. + type: string + required: + - name + type: object + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + limits: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Limits describes the maximum amount of compute resources allowed. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + requests: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Requests describes the minimum amount of compute resources required. + If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, + otherwise to an implementation-defined value. Requests cannot exceed Limits. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + type: object + restartPolicy: + description: |- + Restart policy for the container to manage the restart behavior of each + container within a pod. + This may only be set for init containers. You cannot set this field on + ephemeral containers. + type: string + securityContext: + description: |- + Optional: SecurityContext defines the security options the ephemeral container should be run with. + If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. + properties: + allowPrivilegeEscalation: + description: |- + AllowPrivilegeEscalation controls whether a process can gain more + privileges than its parent process. This bool directly controls if + the no_new_privs flag will be set on the container process. + AllowPrivilegeEscalation is true always when the container is: + 1) run as Privileged + 2) has CAP_SYS_ADMIN + Note that this field cannot be set when spec.os.name is windows. + type: boolean + capabilities: + description: |- + The capabilities to add/drop when running containers. + Defaults to the default set of capabilities granted by the container runtime. + Note that this field cannot be set when spec.os.name is windows. + properties: + add: + description: Added capabilities + items: + description: Capability represent POSIX + capabilities type + type: string + type: array + drop: + description: Removed capabilities + items: + description: Capability represent POSIX + capabilities type + type: string + type: array + type: object + privileged: + description: |- + Run container in privileged mode. + Processes in privileged containers are essentially equivalent to root on the host. + Defaults to false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + procMount: + description: |- + procMount denotes the type of proc mount to use for the containers. + The default is DefaultProcMount which uses the container runtime defaults for + readonly paths and masked paths. + This requires the ProcMountType feature flag to be enabled. + Note that this field cannot be set when spec.os.name is windows. + type: string + readOnlyRootFilesystem: + description: |- + Whether this container has a read-only root filesystem. + Default is false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + runAsGroup: + description: |- + The GID to run the entrypoint of the container process. + Uses runtime default if unset. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + runAsNonRoot: + description: |- + Indicates that the container must run as a non-root user. + If true, the Kubelet will validate the image at runtime to ensure that it + does not run as UID 0 (root) and fail to start the container if it does. + If unset or false, no such validation will be performed. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: boolean + runAsUser: + description: |- + The UID to run the entrypoint of the container process. + Defaults to user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + seLinuxOptions: + description: |- + The SELinux context to be applied to the container. + If unspecified, the container runtime will allocate a random SELinux context for each + container. May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + properties: + level: + description: Level is SELinux level label + that applies to the container. + type: string + role: + description: Role is a SELinux role label + that applies to the container. + type: string + type: + description: Type is a SELinux type label + that applies to the container. + type: string + user: + description: User is a SELinux user label + that applies to the container. + type: string + type: object + seccompProfile: + description: |- + The seccomp options to use by this container. If seccomp options are + provided at both the pod & container level, the container options + override the pod options. + Note that this field cannot be set when spec.os.name is windows. + properties: + localhostProfile: description: |- - Path within the volume from which the container's volume should be mounted. - Defaults to "" (volume's root). + localhostProfile indicates a profile defined in a file on the node should be used. + The profile must be preconfigured on the node to work. + Must be a descending path, relative to the kubelet's configured seccomp profile location. + Must be set if type is "Localhost". Must NOT be set for any other type. type: string - subPathExpr: + type: description: |- - Expanded path within the volume from which the container's volume should be mounted. - Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. - Defaults to "" (volume's root). - SubPathExpr and SubPath are mutually exclusive. + type indicates which kind of seccomp profile will be applied. + Valid options are: + + + Localhost - a profile defined in a file on the node should be used. + RuntimeDefault - the container runtime default profile should be used. + Unconfined - no profile should be applied. type: string required: - - mountPath - - name + - type type: object - type: array - workingDir: - description: |- - Container's working directory. - If not specified, the container runtime's default will be used, which - might be configured in the container image. - Cannot be updated. - type: string - required: - - name - type: object - type: array - hostAliases: - description: |- - HostAliases is an optional list of hosts and IPs that will be injected into the pod's hosts - file if specified. This is only valid for non-hostNetwork pods. - items: - description: |- - HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the - pod's hosts file. - properties: - hostnames: - description: Hostnames for the above IP address. - items: - type: string - type: array - ip: - description: IP address of the host file entry. - type: string - type: object - type: array - hostIPC: - description: |- - Use the host's ipc namespace. - Optional: Default to false. - type: boolean - hostNetwork: - description: |- - Host networking requested for this pod. Use the host's network namespace. - If this option is set, the ports that will be used must be specified. - Default to false. - type: boolean - hostPID: - description: |- - Use the host's pid namespace. - Optional: Default to false. - type: boolean - hostUsers: - description: |- - Use the host's user namespace. - Optional: Default to true. - If set to true or not present, the pod will be run in the host user namespace, useful - for when the pod needs a feature only available to the host user namespace, such as - loading a kernel module with CAP_SYS_MODULE. - When set to false, a new userns is created for the pod. Setting false is useful for - mitigating container breakout vulnerabilities even allowing users to run their - containers as root without actually having root privileges on the host. - This field is alpha-level and is only honored by servers that enable the UserNamespacesSupport feature. - type: boolean - hostname: - description: |- - Specifies the hostname of the Pod - If not specified, the pod's hostname will be set to a system-defined value. - type: string - imagePullSecrets: - description: |- - ImagePullSecrets is an optional list of references to secrets in the same namespace to use for pulling any of the images used by this PodSpec. - If specified, these secrets will be passed to individual puller implementations for them to use. - More info: https://kubernetes.io/docs/concepts/containers/images#specifying-imagepullsecrets-on-a-pod - items: - description: |- - LocalObjectReference contains enough information to let you locate the - referenced object inside the same namespace. - properties: - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - type: object - x-kubernetes-map-type: atomic - type: array - initContainers: - description: |- - List of initialization containers belonging to the pod. - Init containers are executed in order prior to containers being started. If any - init container fails, the pod is considered to have failed and is handled according - to its restartPolicy. The name for an init container or normal container must be - unique among all containers. - Init containers may not have Lifecycle actions, Readiness probes, Liveness probes, or Startup probes. - The resourceRequirements of an init container are taken into account during scheduling - by finding the highest request/limit for each resource type, and then using the max of - of that value or the sum of the normal containers. Limits are applied to init containers - in a similar fashion. - Init containers cannot currently be added or removed. - Cannot be updated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/ - items: - description: - A single application container that you - want to run within a pod. - properties: - args: - description: |- - Arguments to the entrypoint. - The container image's CMD is used if this is not provided. - Variable references $(VAR_NAME) are expanded using the container's environment. If a variable - cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced - to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will - produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless - of whether the variable exists or not. Cannot be updated. - More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell - items: - type: string - type: array - command: - description: |- - Entrypoint array. Not executed within a shell. - The container image's ENTRYPOINT is used if this is not provided. - Variable references $(VAR_NAME) are expanded using the container's environment. If a variable - cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced - to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will - produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless - of whether the variable exists or not. Cannot be updated. - More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell - items: - type: string - type: array - env: - description: |- - List of environment variables to set in the container. - Cannot be updated. - items: - description: - EnvVar represents an environment - variable present in a Container. + windowsOptions: + description: |- + The Windows specific settings applied to all containers. + If unspecified, the options from the PodSecurityContext will be used. + If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is linux. properties: - name: - description: - Name of the environment variable. - Must be a C_IDENTIFIER. - type: string - value: - description: |- - Variable references $(VAR_NAME) are expanded - using the previously defined environment variables in the container and - any service environment variables. If a variable cannot be resolved, - the reference in the input string will be unchanged. Double $$ are reduced - to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. - "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". - Escaped references will never be expanded, regardless of whether the variable - exists or not. - Defaults to "". - type: string - valueFrom: - description: - Source for the environment variable's - value. Cannot be used if value is not empty. - properties: - configMapKeyRef: - description: Selects a key of a ConfigMap. - properties: - key: - description: The key to select. - type: string - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - Specify whether the ConfigMap - or its key must be defined - type: boolean - required: - - key - type: object - x-kubernetes-map-type: atomic - fieldRef: - description: |- - Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['']`, `metadata.annotations['']`, - spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs. - properties: - apiVersion: - description: - Version of the schema - the FieldPath is written in terms - of, defaults to "v1". - type: string - fieldPath: - description: - Path of the field to - select in the specified API version. - type: string - required: - - fieldPath - type: object - x-kubernetes-map-type: atomic - resourceFieldRef: - description: |- - Selects a resource of the container: only resources limits and requests - (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported. - properties: - containerName: - description: - "Container name: required - for volumes, optional for env vars" - type: string - divisor: - anyOf: - - type: integer - - type: string - description: - Specifies the output - format of the exposed resources, - defaults to "1" - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ - x-kubernetes-int-or-string: true - resource: - description: - "Required: resource to - select" - type: string - required: - - resource - type: object - x-kubernetes-map-type: atomic - secretKeyRef: - description: - Selects a key of a secret - in the pod's namespace - properties: - key: - description: - The key of the secret - to select from. Must be a valid - secret key. - type: string - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - Specify whether the Secret - or its key must be defined - type: boolean - required: - - key - type: object - x-kubernetes-map-type: atomic - type: object + gmsaCredentialSpec: + description: |- + GMSACredentialSpec is where the GMSA admission webhook + (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the + GMSA credential spec named by the GMSACredentialSpecName field. + type: string + gmsaCredentialSpecName: + description: GMSACredentialSpecName is the + name of the GMSA credential spec to use. + type: string + hostProcess: + description: |- + HostProcess determines if a container should be run as a 'Host Process' container. + All of a Pod's containers must have the same effective HostProcess value + (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). + In addition, if HostProcess is true then HostNetwork must also be set to true. + type: boolean + runAsUserName: + description: |- + The UserName in Windows to run the entrypoint of the container process. + Defaults to the user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: string + type: object + type: object + startupProbe: + description: Probes are not allowed for ephemeral + containers. + properties: + exec: + description: Exec specifies the action to take. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies an action involving + a GRPC port. + properties: + port: + description: Port number of the gRPC service. + Number must be in the range 1 to 65535. + format: int32 + type: integer + service: + description: |- + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + + If this is not specified, the default behavior is defined by gRPC. + type: string required: - - name + - port type: object - type: array - envFrom: - description: |- - List of sources to populate environment variables in the container. - The keys defined within a source must be a C_IDENTIFIER. All invalid keys - will be reported as an event when the container is starting. When a key exists in multiple - sources, the value associated with the last source will take precedence. - Values defined by an Env with a duplicate key will take precedence. - Cannot be updated. - items: - description: - EnvFromSource represents the source - of a set of ConfigMaps + httpGet: + description: HTTPGet specifies the http request + to perform. properties: - configMapRef: - description: The ConfigMap to select from - properties: - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - Specify whether the ConfigMap - must be defined - type: boolean - type: object - x-kubernetes-map-type: atomic - prefix: - description: - An optional identifier to prepend - to each key in the ConfigMap. Must be a - C_IDENTIFIER. - type: string - secretRef: - description: The Secret to select from - properties: - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - Specify whether the Secret - must be defined - type: boolean - type: object - x-kubernetes-map-type: atomic + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the + request. HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port type: object - type: array - image: - description: |- - Container image name. - More info: https://kubernetes.io/docs/concepts/containers/images - This field is optional to allow higher level config management to default or override - container images in workload controllers like Deployments and StatefulSets. + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies an action involving + a TCP port. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + stdin: + description: |- + Whether this container should allocate a buffer for stdin in the container runtime. If this + is not set, reads from stdin in the container will always result in EOF. + Default is false. + type: boolean + stdinOnce: + description: |- + Whether the container runtime should close the stdin channel after it has been opened by + a single attach. When stdin is true the stdin stream will remain open across multiple attach + sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the + first client attaches to stdin, and then remains open and accepts data until the client disconnects, + at which time stdin is closed and remains closed until the container is restarted. If this + flag is false, a container processes that reads from stdin will never receive an EOF. + Default is false + type: boolean + targetContainerName: + description: |- + If set, the name of the container from PodSpec that this ephemeral container targets. + The ephemeral container will be run in the namespaces (IPC, PID, etc) of this container. + If not set then the ephemeral container uses the namespaces configured in the Pod spec. + + + The container runtime must implement support for this feature. If the runtime does not + support namespace targeting then the result of setting this field is undefined. + type: string + terminationMessagePath: + description: |- + Optional: Path at which the file to which the container's termination message + will be written is mounted into the container's filesystem. + Message written is intended to be brief final status, such as an assertion failure message. + Will be truncated by the node if greater than 4096 bytes. The total message length across + all containers will be limited to 12kb. + Defaults to /dev/termination-log. + Cannot be updated. + type: string + terminationMessagePolicy: + description: |- + Indicate how the termination message should be populated. File will use the contents of + terminationMessagePath to populate the container status message on both success and failure. + FallbackToLogsOnError will use the last chunk of container log output if the termination + message file is empty and the container exited with an error. + The log output is limited to 2048 bytes or 80 lines, whichever is smaller. + Defaults to File. + Cannot be updated. + type: string + tty: + description: |- + Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. + Default is false. + type: boolean + volumeDevices: + description: volumeDevices is the list of block + devices to be used by the container. + items: + description: volumeDevice describes a mapping + of a raw block device within a container. + properties: + devicePath: + description: devicePath is the path inside + of the container that the device will be + mapped to. + type: string + name: + description: name must match the name of a + persistentVolumeClaim in the pod + type: string + required: + - devicePath + - name + type: object + type: array + volumeMounts: + description: |- + Pod volumes to mount into the container's filesystem. Subpath mounts are not allowed for ephemeral containers. + Cannot be updated. + items: + description: VolumeMount describes a mounting + of a Volume within a container. + properties: + mountPath: + description: |- + Path within the container at which the volume should be mounted. Must + not contain ':'. + type: string + mountPropagation: + description: |- + mountPropagation determines how mounts are propagated from the host + to container and the other way around. + When not set, MountPropagationNone is used. + This field is beta in 1.10. + type: string + name: + description: This must match the Name of a + Volume. + type: string + readOnly: + description: |- + Mounted read-only if true, read-write otherwise (false or unspecified). + Defaults to false. + type: boolean + subPath: + description: |- + Path within the volume from which the container's volume should be mounted. + Defaults to "" (volume's root). + type: string + subPathExpr: + description: |- + Expanded path within the volume from which the container's volume should be mounted. + Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. + Defaults to "" (volume's root). + SubPathExpr and SubPath are mutually exclusive. + type: string + required: + - mountPath + - name + type: object + type: array + workingDir: + description: |- + Container's working directory. + If not specified, the container runtime's default will be used, which + might be configured in the container image. + Cannot be updated. + type: string + required: + - name + type: object + type: array + hostAliases: + description: |- + HostAliases is an optional list of hosts and IPs that will be injected into the pod's hosts + file if specified. This is only valid for non-hostNetwork pods. + items: + description: |- + HostAlias holds the mapping between IP and hostnames that will be injected as an entry in the + pod's hosts file. + properties: + hostnames: + description: Hostnames for the above IP address. + items: type: string - imagePullPolicy: - description: |- - Image pull policy. - One of Always, Never, IfNotPresent. - Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. - Cannot be updated. - More info: https://kubernetes.io/docs/concepts/containers/images#updating-images + type: array + ip: + description: IP address of the host file entry. + type: string + type: object + type: array + hostIPC: + description: |- + Use the host's ipc namespace. + Optional: Default to false. + type: boolean + hostNetwork: + description: |- + Host networking requested for this pod. Use the host's network namespace. + If this option is set, the ports that will be used must be specified. + Default to false. + type: boolean + hostPID: + description: |- + Use the host's pid namespace. + Optional: Default to false. + type: boolean + hostUsers: + description: |- + Use the host's user namespace. + Optional: Default to true. + If set to true or not present, the pod will be run in the host user namespace, useful + for when the pod needs a feature only available to the host user namespace, such as + loading a kernel module with CAP_SYS_MODULE. + When set to false, a new userns is created for the pod. Setting false is useful for + mitigating container breakout vulnerabilities even allowing users to run their + containers as root without actually having root privileges on the host. + This field is alpha-level and is only honored by servers that enable the UserNamespacesSupport feature. + type: boolean + hostname: + description: |- + Specifies the hostname of the Pod + If not specified, the pod's hostname will be set to a system-defined value. + type: string + imagePullSecrets: + description: |- + ImagePullSecrets is an optional list of references to secrets in the same namespace to use for pulling any of the images used by this PodSpec. + If specified, these secrets will be passed to individual puller implementations for them to use. + More info: https://kubernetes.io/docs/concepts/containers/images#specifying-imagepullsecrets-on-a-pod + items: + description: |- + LocalObjectReference contains enough information to let you locate the + referenced object inside the same namespace. + properties: + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + type: object + x-kubernetes-map-type: atomic + type: array + initContainers: + description: |- + List of initialization containers belonging to the pod. + Init containers are executed in order prior to containers being started. If any + init container fails, the pod is considered to have failed and is handled according + to its restartPolicy. The name for an init container or normal container must be + unique among all containers. + Init containers may not have Lifecycle actions, Readiness probes, Liveness probes, or Startup probes. + The resourceRequirements of an init container are taken into account during scheduling + by finding the highest request/limit for each resource type, and then using the max of + of that value or the sum of the normal containers. Limits are applied to init containers + in a similar fashion. + Init containers cannot currently be added or removed. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/ + items: + description: A single application container that you + want to run within a pod. + properties: + args: + description: |- + Arguments to the entrypoint. + The container image's CMD is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: type: string - lifecycle: - description: |- - Actions that the management system should take in response to container lifecycle events. - Cannot be updated. + type: array + command: + description: |- + Entrypoint array. Not executed within a shell. + The container image's ENTRYPOINT is used if this is not provided. + Variable references $(VAR_NAME) are expanded using the container's environment. If a variable + cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will + produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless + of whether the variable exists or not. Cannot be updated. + More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shell + items: + type: string + type: array + env: + description: |- + List of environment variables to set in the container. + Cannot be updated. + items: + description: EnvVar represents an environment + variable present in a Container. properties: - postStart: + name: + description: Name of the environment variable. + Must be a C_IDENTIFIER. + type: string + value: description: |- - PostStart is called immediately after a container is created. If the handler fails, - the container is terminated and restarted according to its restart policy. - Other management of the container blocks until the hook completes. - More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks - properties: - exec: - description: - Exec specifies the action to - take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - httpGet: - description: - HTTPGet specifies the http - request to perform. + Variable references $(VAR_NAME) are expanded + using the previously defined environment variables in the container and + any service environment variables. If a variable cannot be resolved, + the reference in the input string will be unchanged. Double $$ are reduced + to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. + "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". + Escaped references will never be expanded, regardless of whether the variable + exists or not. + Defaults to "". + type: string + valueFrom: + description: Source for the environment variable's + value. Cannot be used if value is not empty. + properties: + configMapKeyRef: + description: Selects a key of a ConfigMap. properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in - the request. HTTP allows repeated - headers. - items: - description: - HTTPHeader describes - a custom header to be used in HTTP - probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: - The header field - value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. + key: + description: The key to select. type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: + name: description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? type: string + optional: + description: Specify whether the ConfigMap + or its key must be defined + type: boolean required: - - port - type: object - sleep: - description: - Sleep represents the duration - that the container should sleep before - being terminated. - properties: - seconds: - description: - Seconds is the number of - seconds to sleep. - format: int64 - type: integer - required: - - seconds + - key type: object - tcpSocket: + x-kubernetes-map-type: atomic + fieldRef: description: |- - Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept - for the backward compatibility. There are no validation of this field and - lifecycle hooks will fail in runtime when tcp handler is specified. + Selects a field of the pod: supports metadata.name, metadata.namespace, `metadata.labels['']`, `metadata.annotations['']`, + spec.nodeName, spec.serviceAccountName, status.hostIP, status.podIP, status.podIPs. properties: - host: - description: - "Optional: Host name to - connect to, defaults to the pod IP." + apiVersion: + description: Version of the schema + the FieldPath is written in terms + of, defaults to "v1". + type: string + fieldPath: + description: Path of the field to + select in the specified API version. type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true required: - - port - type: object - type: object - preStop: - description: |- - PreStop is called immediately before a container is terminated due to an - API request or management event such as liveness/startup probe failure, - preemption, resource contention, etc. The handler is not called if the - container crashes or exits. The Pod's termination grace period countdown begins before the - PreStop hook is executed. Regardless of the outcome of the handler, the - container will eventually terminate within the Pod's termination grace - period (unless delayed by finalizers). Other management of the container blocks until the hook completes - or until the termination grace period is reached. - More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks - properties: - exec: - description: - Exec specifies the action to - take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array + - fieldPath type: object - httpGet: - description: - HTTPGet specifies the http - request to perform. + x-kubernetes-map-type: atomic + resourceFieldRef: + description: |- + Selects a resource of the container: only resources limits and requests + (limits.cpu, limits.memory, limits.ephemeral-storage, requests.cpu, requests.memory and requests.ephemeral-storage) are currently supported. properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in - the request. HTTP allows repeated - headers. - items: - description: - HTTPHeader describes - a custom header to be used in HTTP - probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: - The header field - value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. + containerName: + description: 'Container name: required + for volumes, optional for env vars' type: string - port: + divisor: anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. + - type: integer + - type: string + description: Specifies the output + format of the exposed resources, + defaults to "1" + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ x-kubernetes-int-or-string: true - scheme: - description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. + resource: + description: 'Required: resource to + select' type: string required: - - port - type: object - sleep: - description: - Sleep represents the duration - that the container should sleep before - being terminated. - properties: - seconds: - description: - Seconds is the number of - seconds to sleep. - format: int64 - type: integer - required: - - seconds + - resource type: object - tcpSocket: - description: |- - Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept - for the backward compatibility. There are no validation of this field and - lifecycle hooks will fail in runtime when tcp handler is specified. + x-kubernetes-map-type: atomic + secretKeyRef: + description: Selects a key of a secret + in the pod's namespace properties: - host: - description: - "Optional: Host name to - connect to, defaults to the pod IP." + key: + description: The key of the secret + to select from. Must be a valid + secret key. type: string - port: - anyOf: - - type: integer - - type: string + name: description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + optional: + description: Specify whether the Secret + or its key must be defined + type: boolean required: - - port + - key type: object + x-kubernetes-map-type: atomic type: object + required: + - name type: object - livenessProbe: - description: |- - Periodic probe of container liveness. - Container will be restarted if the probe fails. - Cannot be updated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + type: array + envFrom: + description: |- + List of sources to populate environment variables in the container. + The keys defined within a source must be a C_IDENTIFIER. All invalid keys + will be reported as an event when the container is starting. When a key exists in multiple + sources, the value associated with the last source will take precedence. + Values defined by an Env with a duplicate key will take precedence. + Cannot be updated. + items: + description: EnvFromSource represents the source + of a set of ConfigMaps properties: - exec: - description: Exec specifies the action to take. + configMapRef: + description: The ConfigMap to select from properties: - command: + name: description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + optional: + description: Specify whether the ConfigMap + must be defined + type: boolean + type: object + x-kubernetes-map-type: atomic + prefix: + description: An optional identifier to prepend + to each key in the ConfigMap. Must be a + C_IDENTIFIER. + type: string + secretRef: + description: The Secret to select from + properties: + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + optional: + description: Specify whether the Secret + must be defined + type: boolean + type: object + x-kubernetes-map-type: atomic + type: object + type: array + image: + description: |- + Container image name. + More info: https://kubernetes.io/docs/concepts/containers/images + This field is optional to allow higher level config management to default or override + container images in workload controllers like Deployments and StatefulSets. + type: string + imagePullPolicy: + description: |- + Image pull policy. + One of Always, Never, IfNotPresent. + Defaults to Always if :latest tag is specified, or IfNotPresent otherwise. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/containers/images#updating-images + type: string + lifecycle: + description: |- + Actions that the management system should take in response to container lifecycle events. + Cannot be updated. + properties: + postStart: + description: |- + PostStart is called immediately after a container is created. If the handler fails, + the container is terminated and restarted according to its restart policy. + Other management of the container blocks until the hook completes. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks + properties: + exec: + description: Exec specifies the action to + take. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + httpGet: + description: HTTPGet specifies the http + request to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in + the request. HTTP allows repeated + headers. + items: + description: HTTPHeader describes + a custom header to be used in HTTP + probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field + value + type: string + required: + - name + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. type: string - type: array - type: object - failureThreshold: - description: |- - Minimum consecutive failures for the probe to be considered failed after having succeeded. - Defaults to 3. Minimum value is 1. - format: int32 - type: integer - grpc: - description: - GRPC specifies an action involving - a GRPC port. - properties: - port: - description: - Port number of the gRPC service. - Number must be in the range 1 to 65535. - format: int32 - type: integer - service: - description: |- - Service is the name of the service to place in the gRPC HealthCheckRequest - (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). - - - If this is not specified, the default behavior is defined by gRPC. - type: string - required: + port: + anyOf: + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: - port - type: object - httpGet: - description: - HTTPGet specifies the http request - to perform. - properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in the - request. HTTP allows repeated headers. - items: - description: - HTTPHeader describes a custom - header to be used in HTTP probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: The header field value - type: string - required: + type: object + sleep: + description: Sleep represents the duration + that the container should sleep before + being terminated. + properties: + seconds: + description: Seconds is the number of + seconds to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for the backward compatibility. There are no validation of this field and + lifecycle hooks will fail in runtime when tcp handler is specified. + properties: + host: + description: 'Optional: Host name to + connect to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + type: object + preStop: + description: |- + PreStop is called immediately before a container is terminated due to an + API request or management event such as liveness/startup probe failure, + preemption, resource contention, etc. The handler is not called if the + container crashes or exits. The Pod's termination grace period countdown begins before the + PreStop hook is executed. Regardless of the outcome of the handler, the + container will eventually terminate within the Pod's termination grace + period (unless delayed by finalizers). Other management of the container blocks until the hook completes + or until the termination grace period is reached. + More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks + properties: + exec: + description: Exec specifies the action to + take. + properties: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + httpGet: + description: HTTPGet specifies the http + request to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in + the request. HTTP allows repeated + headers. + items: + description: HTTPHeader describes + a custom header to be used in HTTP + probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field + value + type: string + required: - name - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. - type: string - port: - anyOf: + type: object + type: array + path: + description: Path to access on the HTTP + server. + type: string + port: + anyOf: - type: integer - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: - description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. - type: string - required: + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: - port - type: object - initialDelaySeconds: - description: |- - Number of seconds after the container has started before liveness probes are initiated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - periodSeconds: - description: |- - How often (in seconds) to perform the probe. - Default to 10 seconds. Minimum value is 1. - format: int32 - type: integer - successThreshold: - description: |- - Minimum consecutive successes for the probe to be considered successful after having failed. - Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. - format: int32 - type: integer - tcpSocket: - description: - TCPSocket specifies an action involving - a TCP port. - properties: - host: - description: - "Optional: Host name to connect - to, defaults to the pod IP." - type: string - port: - anyOf: + type: object + sleep: + description: Sleep represents the duration + that the container should sleep before + being terminated. + properties: + seconds: + description: Seconds is the number of + seconds to sleep. + format: int64 + type: integer + required: + - seconds + type: object + tcpSocket: + description: |- + Deprecated. TCPSocket is NOT supported as a LifecycleHandler and kept + for the backward compatibility. There are no validation of this field and + lifecycle hooks will fail in runtime when tcp handler is specified. + properties: + host: + description: 'Optional: Host name to + connect to, defaults to the pod IP.' + type: string + port: + anyOf: - type: integer - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - required: + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: - port - type: object - terminationGracePeriodSeconds: - description: |- - Optional duration in seconds the pod needs to terminate gracefully upon probe failure. - The grace period is the duration in seconds after the processes running in the pod are sent - a termination signal and the time when the processes are forcibly halted with a kill signal. - Set this value longer than the expected cleanup time for your process. - If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this - value overrides the value provided by the pod spec. - Value must be non-negative integer. The value zero indicates stop immediately via - the kill signal (no opportunity to shut down). - This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. - Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. - format: int64 - type: integer - timeoutSeconds: - description: |- - Number of seconds after which the probe times out. - Defaults to 1 second. Minimum value is 1. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - type: object - name: - description: |- - Name of the container specified as a DNS_LABEL. - Each container in a pod must have a unique name (DNS_LABEL). - Cannot be updated. - type: string - ports: - description: |- - List of ports to expose from the container. Not specifying a port here - DOES NOT prevent that port from being exposed. Any port which is - listening on the default "0.0.0.0" address inside a container will be - accessible from the network. - Modifying this array with strategic merge patch may corrupt the data. - For more information See https://github.com/kubernetes/kubernetes/issues/108255. - Cannot be updated. - items: - description: - ContainerPort represents a network - port in a single container. + type: object + type: object + type: object + livenessProbe: + description: |- + Periodic probe of container liveness. + Container will be restarted if the probe fails. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies the action to take. properties: - containerPort: + command: description: |- - Number of port to expose on the pod's IP address. - This must be a valid port number, 0 < x < 65536. + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies an action involving + a GRPC port. + properties: + port: + description: Port number of the gRPC service. + Number must be in the range 1 to 65535. format: int32 type: integer - hostIP: - description: - What host IP to bind the external - port to. - type: string - hostPort: + service: description: |- - Number of port to expose on the host. - If specified, this must be a valid port number, 0 < x < 65536. - If HostNetwork is specified, this must match ContainerPort. - Most containers do not need this. - format: int32 - type: integer - name: + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + + If this is not specified, the default behavior is defined by gRPC. + type: string + required: + - port + type: object + httpGet: + description: HTTPGet specifies the http request + to perform. + properties: + host: description: |- - If specified, this must be an IANA_SVC_NAME and unique within the pod. Each - named port in a pod must have a unique name. Name for the port that can be - referred to by services. + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the + request. HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. type: string - protocol: - default: TCP + port: + anyOf: + - type: integer + - type: string description: |- - Protocol for port. Must be UDP, TCP, or SCTP. - Defaults to "TCP". + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. type: string required: - - containerPort + - port type: object - type: array - x-kubernetes-list-map-keys: - - containerPort - - protocol - x-kubernetes-list-type: map - readinessProbe: - description: |- - Periodic probe of container service readiness. - Container will be removed from service endpoints if the probe fails. - Cannot be updated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies an action involving + a TCP port. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + name: + description: |- + Name of the container specified as a DNS_LABEL. + Each container in a pod must have a unique name (DNS_LABEL). + Cannot be updated. + type: string + ports: + description: |- + List of ports to expose from the container. Not specifying a port here + DOES NOT prevent that port from being exposed. Any port which is + listening on the default "0.0.0.0" address inside a container will be + accessible from the network. + Modifying this array with strategic merge patch may corrupt the data. + For more information See https://github.com/kubernetes/kubernetes/issues/108255. + Cannot be updated. + items: + description: ContainerPort represents a network + port in a single container. properties: - exec: - description: Exec specifies the action to take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - failureThreshold: - description: |- - Minimum consecutive failures for the probe to be considered failed after having succeeded. - Defaults to 3. Minimum value is 1. - format: int32 - type: integer - grpc: - description: - GRPC specifies an action involving - a GRPC port. - properties: - port: - description: - Port number of the gRPC service. - Number must be in the range 1 to 65535. - format: int32 - type: integer - service: - description: |- - Service is the name of the service to place in the gRPC HealthCheckRequest - (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). - - - If this is not specified, the default behavior is defined by gRPC. - type: string - required: - - port - type: object - httpGet: - description: - HTTPGet specifies the http request - to perform. - properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in the - request. HTTP allows repeated headers. - items: - description: - HTTPHeader describes a custom - header to be used in HTTP probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: The header field value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: - description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. - type: string - required: - - port - type: object - initialDelaySeconds: - description: |- - Number of seconds after the container has started before liveness probes are initiated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - periodSeconds: + containerPort: description: |- - How often (in seconds) to perform the probe. - Default to 10 seconds. Minimum value is 1. + Number of port to expose on the pod's IP address. + This must be a valid port number, 0 < x < 65536. format: int32 type: integer - successThreshold: + hostIP: + description: What host IP to bind the external + port to. + type: string + hostPort: description: |- - Minimum consecutive successes for the probe to be considered successful after having failed. - Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + Number of port to expose on the host. + If specified, this must be a valid port number, 0 < x < 65536. + If HostNetwork is specified, this must match ContainerPort. + Most containers do not need this. format: int32 type: integer - tcpSocket: - description: - TCPSocket specifies an action involving - a TCP port. - properties: - host: - description: - "Optional: Host name to connect - to, defaults to the pod IP." - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - required: - - port - type: object - terminationGracePeriodSeconds: + name: description: |- - Optional duration in seconds the pod needs to terminate gracefully upon probe failure. - The grace period is the duration in seconds after the processes running in the pod are sent - a termination signal and the time when the processes are forcibly halted with a kill signal. - Set this value longer than the expected cleanup time for your process. - If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this - value overrides the value provided by the pod spec. - Value must be non-negative integer. The value zero indicates stop immediately via - the kill signal (no opportunity to shut down). - This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. - Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. - format: int64 - type: integer - timeoutSeconds: + If specified, this must be an IANA_SVC_NAME and unique within the pod. Each + named port in a pod must have a unique name. Name for the port that can be + referred to by services. + type: string + protocol: + default: TCP description: |- - Number of seconds after which the probe times out. - Defaults to 1 second. Minimum value is 1. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer + Protocol for port. Must be UDP, TCP, or SCTP. + Defaults to "TCP". + type: string + required: + - containerPort type: object - resizePolicy: - description: Resources resize policy for the container. - items: - description: - ContainerResizePolicy represents - resource resize policy for the container. + type: array + x-kubernetes-list-map-keys: + - containerPort + - protocol + x-kubernetes-list-type: map + readinessProbe: + description: |- + Periodic probe of container service readiness. + Container will be removed from service endpoints if the probe fails. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies the action to take. properties: - resourceName: + command: description: |- - Name of the resource to which this resource resize policy applies. - Supported values: cpu, memory. - type: string - restartPolicy: + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies an action involving + a GRPC port. + properties: + port: + description: Port number of the gRPC service. + Number must be in the range 1 to 65535. + format: int32 + type: integer + service: description: |- - Restart policy to apply when specified resource is resized. - If not specified, it defaults to NotRequired. + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + + If this is not specified, the default behavior is defined by gRPC. type: string required: - - resourceName - - restartPolicy + - port type: object - type: array - x-kubernetes-list-type: atomic - resources: - description: |- - Compute Resources required by this container. - Cannot be updated. - More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ - properties: - claims: - description: |- - Claims lists the names of resources, defined in spec.resourceClaims, - that are used by this container. - - - This is an alpha field and requires enabling the - DynamicResourceAllocation feature gate. - - - This field is immutable. It can only be set for containers. - items: - description: - ResourceClaim references one - entry in PodSpec.ResourceClaims. - properties: - name: - description: |- - Name must match the name of one entry in pod.spec.resourceClaims of - the Pod where this field is used. It makes that resource available - inside a container. - type: string - required: + httpGet: + description: HTTPGet specifies the http request + to perform. + properties: + host: + description: |- + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. + type: string + httpHeaders: + description: Custom headers to set in the + request. HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: - name - type: object - type: array - x-kubernetes-list-map-keys: - - name - x-kubernetes-list-type: map - limits: - additionalProperties: + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. + type: string + port: anyOf: - - type: integer - - type: string - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + - type: integer + - type: string + description: |- + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. x-kubernetes-int-or-string: true - description: |- - Limits describes the maximum amount of compute resources allowed. - More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ - type: object - requests: - additionalProperties: + scheme: + description: |- + Scheme to use for connecting to the host. + Defaults to HTTP. + type: string + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies an action involving + a TCP port. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' + type: string + port: anyOf: - - type: integer - - type: string - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. x-kubernetes-int-or-string: true - description: |- - Requests describes the minimum amount of compute resources required. - If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, - otherwise to an implementation-defined value. Requests cannot exceed Limits. - More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ - type: object - type: object - restartPolicy: - description: |- - RestartPolicy defines the restart behavior of individual containers in a pod. - This field may only be set for init containers, and the only allowed value is "Always". - For non-init containers or when this field is not specified, - the restart behavior is defined by the Pod's restart policy and the container type. - Setting the RestartPolicy as "Always" for the init container will have the following effect: - this init container will be continually restarted on - exit until all regular containers have terminated. Once all regular - containers have completed, all init containers with restartPolicy "Always" - will be shut down. This lifecycle differs from normal init containers and - is often referred to as a "sidecar" container. Although this init - container still starts in the init container sequence, it does not wait - for the container to complete before proceeding to the next init - container. Instead, the next init container starts immediately after this - init container is started, or after any startupProbe has successfully - completed. - type: string - securityContext: - description: |- - SecurityContext defines the security options the container should be run with. - If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. - More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/ + required: + - port + type: object + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + resizePolicy: + description: Resources resize policy for the container. + items: + description: ContainerResizePolicy represents + resource resize policy for the container. properties: - allowPrivilegeEscalation: - description: |- - AllowPrivilegeEscalation controls whether a process can gain more - privileges than its parent process. This bool directly controls if - the no_new_privs flag will be set on the container process. - AllowPrivilegeEscalation is true always when the container is: - 1) run as Privileged - 2) has CAP_SYS_ADMIN - Note that this field cannot be set when spec.os.name is windows. - type: boolean - capabilities: - description: |- - The capabilities to add/drop when running containers. - Defaults to the default set of capabilities granted by the container runtime. - Note that this field cannot be set when spec.os.name is windows. - properties: - add: - description: Added capabilities - items: - description: - Capability represent POSIX - capabilities type - type: string - type: array - drop: - description: Removed capabilities - items: - description: - Capability represent POSIX - capabilities type - type: string - type: array - type: object - privileged: - description: |- - Run container in privileged mode. - Processes in privileged containers are essentially equivalent to root on the host. - Defaults to false. - Note that this field cannot be set when spec.os.name is windows. - type: boolean - procMount: + resourceName: description: |- - procMount denotes the type of proc mount to use for the containers. - The default is DefaultProcMount which uses the container runtime defaults for - readonly paths and masked paths. - This requires the ProcMountType feature flag to be enabled. - Note that this field cannot be set when spec.os.name is windows. + Name of the resource to which this resource resize policy applies. + Supported values: cpu, memory. type: string - readOnlyRootFilesystem: - description: |- - Whether this container has a read-only root filesystem. - Default is false. - Note that this field cannot be set when spec.os.name is windows. - type: boolean - runAsGroup: - description: |- - The GID to run the entrypoint of the container process. - Uses runtime default if unset. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is windows. - format: int64 - type: integer - runAsNonRoot: - description: |- - Indicates that the container must run as a non-root user. - If true, the Kubelet will validate the image at runtime to ensure that it - does not run as UID 0 (root) and fail to start the container if it does. - If unset or false, no such validation will be performed. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - type: boolean - runAsUser: - description: |- - The UID to run the entrypoint of the container process. - Defaults to user specified in image metadata if unspecified. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is windows. - format: int64 - type: integer - seLinuxOptions: - description: |- - The SELinux context to be applied to the container. - If unspecified, the container runtime will allocate a random SELinux context for each - container. May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is windows. - properties: - level: - description: - Level is SELinux level label - that applies to the container. - type: string - role: - description: - Role is a SELinux role label - that applies to the container. - type: string - type: - description: - Type is a SELinux type label - that applies to the container. - type: string - user: - description: - User is a SELinux user label - that applies to the container. - type: string - type: object - seccompProfile: + restartPolicy: description: |- - The seccomp options to use by this container. If seccomp options are - provided at both the pod & container level, the container options - override the pod options. - Note that this field cannot be set when spec.os.name is windows. - properties: - localhostProfile: - description: |- - localhostProfile indicates a profile defined in a file on the node should be used. - The profile must be preconfigured on the node to work. - Must be a descending path, relative to the kubelet's configured seccomp profile location. - Must be set if type is "Localhost". Must NOT be set for any other type. - type: string - type: - description: |- - type indicates which kind of seccomp profile will be applied. - Valid options are: + Restart policy to apply when specified resource is resized. + If not specified, it defaults to NotRequired. + type: string + required: + - resourceName + - restartPolicy + type: object + type: array + x-kubernetes-list-type: atomic + resources: + description: |- + Compute Resources required by this container. + Cannot be updated. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + properties: + claims: + description: |- + Claims lists the names of resources, defined in spec.resourceClaims, + that are used by this container. - Localhost - a profile defined in a file on the node should be used. - RuntimeDefault - the container runtime default profile should be used. - Unconfined - no profile should be applied. - type: string - required: - - type - type: object - windowsOptions: - description: |- - The Windows specific settings applied to all containers. - If unspecified, the options from the PodSecurityContext will be used. - If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is linux. - properties: - gmsaCredentialSpec: - description: |- - GMSACredentialSpec is where the GMSA admission webhook - (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the - GMSA credential spec named by the GMSACredentialSpecName field. - type: string - gmsaCredentialSpecName: - description: - GMSACredentialSpecName is the - name of the GMSA credential spec to use. - type: string - hostProcess: - description: |- - HostProcess determines if a container should be run as a 'Host Process' container. - All of a Pod's containers must have the same effective HostProcess value - (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). - In addition, if HostProcess is true then HostNetwork must also be set to true. - type: boolean - runAsUserName: - description: |- - The UserName in Windows to run the entrypoint of the container process. - Defaults to the user specified in image metadata if unspecified. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - type: string - type: object - type: object - startupProbe: - description: |- - StartupProbe indicates that the Pod has successfully initialized. - If specified, no other probes are executed until this completes successfully. - If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. - This can be used to provide different probe parameters at the beginning of a Pod's lifecycle, - when it might take a long time to load data or warm a cache, than during steady-state operation. - This cannot be updated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - properties: - exec: - description: Exec specifies the action to take. - properties: - command: - description: |- - Command is the command line to execute inside the container, the working directory for the - command is root ('/') in the container's filesystem. The command is simply exec'd, it is - not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use - a shell, you need to explicitly call out to that shell. - Exit status of 0 is treated as live/healthy and non-zero is unhealthy. - items: - type: string - type: array - type: object - failureThreshold: - description: |- - Minimum consecutive failures for the probe to be considered failed after having succeeded. - Defaults to 3. Minimum value is 1. - format: int32 - type: integer - grpc: - description: - GRPC specifies an action involving - a GRPC port. - properties: - port: - description: - Port number of the gRPC service. - Number must be in the range 1 to 65535. - format: int32 - type: integer - service: - description: |- - Service is the name of the service to place in the gRPC HealthCheckRequest - (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + This is an alpha field and requires enabling the + DynamicResourceAllocation feature gate. - If this is not specified, the default behavior is defined by gRPC. - type: string - required: - - port - type: object - httpGet: - description: - HTTPGet specifies the http request - to perform. + This field is immutable. It can only be set for containers. + items: + description: ResourceClaim references one + entry in PodSpec.ResourceClaims. properties: - host: - description: |- - Host name to connect to, defaults to the pod IP. You probably want to set - "Host" in httpHeaders instead. - type: string - httpHeaders: - description: - Custom headers to set in the - request. HTTP allows repeated headers. - items: - description: - HTTPHeader describes a custom - header to be used in HTTP probes - properties: - name: - description: |- - The header field name. - This will be canonicalized upon output, so case-variant names will be understood as the same header. - type: string - value: - description: The header field value - type: string - required: - - name - - value - type: object - type: array - path: - description: - Path to access on the HTTP - server. - type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Name or number of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - scheme: + name: description: |- - Scheme to use for connecting to the host. - Defaults to HTTP. + Name must match the name of one entry in pod.spec.resourceClaims of + the Pod where this field is used. It makes that resource available + inside a container. type: string required: - - port + - name type: object - initialDelaySeconds: - description: |- - Number of seconds after the container has started before liveness probes are initiated. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - periodSeconds: - description: |- - How often (in seconds) to perform the probe. - Default to 10 seconds. Minimum value is 1. - format: int32 - type: integer - successThreshold: - description: |- - Minimum consecutive successes for the probe to be considered successful after having failed. - Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. - format: int32 - type: integer - tcpSocket: - description: - TCPSocket specifies an action involving - a TCP port. - properties: - host: - description: - "Optional: Host name to connect - to, defaults to the pod IP." + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + limits: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Limits describes the maximum amount of compute resources allowed. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + requests: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Requests describes the minimum amount of compute resources required. + If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, + otherwise to an implementation-defined value. Requests cannot exceed Limits. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + type: object + restartPolicy: + description: |- + RestartPolicy defines the restart behavior of individual containers in a pod. + This field may only be set for init containers, and the only allowed value is "Always". + For non-init containers or when this field is not specified, + the restart behavior is defined by the Pod's restart policy and the container type. + Setting the RestartPolicy as "Always" for the init container will have the following effect: + this init container will be continually restarted on + exit until all regular containers have terminated. Once all regular + containers have completed, all init containers with restartPolicy "Always" + will be shut down. This lifecycle differs from normal init containers and + is often referred to as a "sidecar" container. Although this init + container still starts in the init container sequence, it does not wait + for the container to complete before proceeding to the next init + container. Instead, the next init container starts immediately after this + init container is started, or after any startupProbe has successfully + completed. + type: string + securityContext: + description: |- + SecurityContext defines the security options the container should be run with. + If set, the fields of SecurityContext override the equivalent fields of PodSecurityContext. + More info: https://kubernetes.io/docs/tasks/configure-pod-container/security-context/ + properties: + allowPrivilegeEscalation: + description: |- + AllowPrivilegeEscalation controls whether a process can gain more + privileges than its parent process. This bool directly controls if + the no_new_privs flag will be set on the container process. + AllowPrivilegeEscalation is true always when the container is: + 1) run as Privileged + 2) has CAP_SYS_ADMIN + Note that this field cannot be set when spec.os.name is windows. + type: boolean + capabilities: + description: |- + The capabilities to add/drop when running containers. + Defaults to the default set of capabilities granted by the container runtime. + Note that this field cannot be set when spec.os.name is windows. + properties: + add: + description: Added capabilities + items: + description: Capability represent POSIX + capabilities type type: string - port: - anyOf: - - type: integer - - type: string - description: |- - Number or name of the port to access on the container. - Number must be in the range 1 to 65535. - Name must be an IANA_SVC_NAME. - x-kubernetes-int-or-string: true - required: - - port - type: object - terminationGracePeriodSeconds: - description: |- - Optional duration in seconds the pod needs to terminate gracefully upon probe failure. - The grace period is the duration in seconds after the processes running in the pod are sent - a termination signal and the time when the processes are forcibly halted with a kill signal. - Set this value longer than the expected cleanup time for your process. - If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this - value overrides the value provided by the pod spec. - Value must be non-negative integer. The value zero indicates stop immediately via - the kill signal (no opportunity to shut down). - This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. - Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. - format: int64 - type: integer - timeoutSeconds: - description: |- - Number of seconds after which the probe times out. - Defaults to 1 second. Minimum value is 1. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes - format: int32 - type: integer - type: object - stdin: - description: |- - Whether this container should allocate a buffer for stdin in the container runtime. If this - is not set, reads from stdin in the container will always result in EOF. - Default is false. - type: boolean - stdinOnce: - description: |- - Whether the container runtime should close the stdin channel after it has been opened by - a single attach. When stdin is true the stdin stream will remain open across multiple attach - sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the - first client attaches to stdin, and then remains open and accepts data until the client disconnects, - at which time stdin is closed and remains closed until the container is restarted. If this - flag is false, a container processes that reads from stdin will never receive an EOF. - Default is false - type: boolean - terminationMessagePath: - description: |- - Optional: Path at which the file to which the container's termination message - will be written is mounted into the container's filesystem. - Message written is intended to be brief final status, such as an assertion failure message. - Will be truncated by the node if greater than 4096 bytes. The total message length across - all containers will be limited to 12kb. - Defaults to /dev/termination-log. - Cannot be updated. - type: string - terminationMessagePolicy: - description: |- - Indicate how the termination message should be populated. File will use the contents of - terminationMessagePath to populate the container status message on both success and failure. - FallbackToLogsOnError will use the last chunk of container log output if the termination - message file is empty and the container exited with an error. - The log output is limited to 2048 bytes or 80 lines, whichever is smaller. - Defaults to File. - Cannot be updated. - type: string - tty: - description: |- - Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. - Default is false. - type: boolean - volumeDevices: - description: - volumeDevices is the list of block - devices to be used by the container. - items: - description: - volumeDevice describes a mapping - of a raw block device within a container. + type: array + drop: + description: Removed capabilities + items: + description: Capability represent POSIX + capabilities type + type: string + type: array + type: object + privileged: + description: |- + Run container in privileged mode. + Processes in privileged containers are essentially equivalent to root on the host. + Defaults to false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + procMount: + description: |- + procMount denotes the type of proc mount to use for the containers. + The default is DefaultProcMount which uses the container runtime defaults for + readonly paths and masked paths. + This requires the ProcMountType feature flag to be enabled. + Note that this field cannot be set when spec.os.name is windows. + type: string + readOnlyRootFilesystem: + description: |- + Whether this container has a read-only root filesystem. + Default is false. + Note that this field cannot be set when spec.os.name is windows. + type: boolean + runAsGroup: + description: |- + The GID to run the entrypoint of the container process. + Uses runtime default if unset. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + runAsNonRoot: + description: |- + Indicates that the container must run as a non-root user. + If true, the Kubelet will validate the image at runtime to ensure that it + does not run as UID 0 (root) and fail to start the container if it does. + If unset or false, no such validation will be performed. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: boolean + runAsUser: + description: |- + The UID to run the entrypoint of the container process. + Defaults to user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + seLinuxOptions: + description: |- + The SELinux context to be applied to the container. + If unspecified, the container runtime will allocate a random SELinux context for each + container. May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is windows. properties: - devicePath: - description: - devicePath is the path inside - of the container that the device will be - mapped to. + level: + description: Level is SELinux level label + that applies to the container. type: string - name: - description: - name must match the name of a - persistentVolumeClaim in the pod + role: + description: Role is a SELinux role label + that applies to the container. + type: string + type: + description: Type is a SELinux type label + that applies to the container. + type: string + user: + description: User is a SELinux user label + that applies to the container. + type: string + type: object + seccompProfile: + description: |- + The seccomp options to use by this container. If seccomp options are + provided at both the pod & container level, the container options + override the pod options. + Note that this field cannot be set when spec.os.name is windows. + properties: + localhostProfile: + description: |- + localhostProfile indicates a profile defined in a file on the node should be used. + The profile must be preconfigured on the node to work. + Must be a descending path, relative to the kubelet's configured seccomp profile location. + Must be set if type is "Localhost". Must NOT be set for any other type. + type: string + type: + description: |- + type indicates which kind of seccomp profile will be applied. + Valid options are: + + + Localhost - a profile defined in a file on the node should be used. + RuntimeDefault - the container runtime default profile should be used. + Unconfined - no profile should be applied. + type: string + required: + - type + type: object + windowsOptions: + description: |- + The Windows specific settings applied to all containers. + If unspecified, the options from the PodSecurityContext will be used. + If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is linux. + properties: + gmsaCredentialSpec: + description: |- + GMSACredentialSpec is where the GMSA admission webhook + (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the + GMSA credential spec named by the GMSACredentialSpecName field. + type: string + gmsaCredentialSpecName: + description: GMSACredentialSpecName is the + name of the GMSA credential spec to use. + type: string + hostProcess: + description: |- + HostProcess determines if a container should be run as a 'Host Process' container. + All of a Pod's containers must have the same effective HostProcess value + (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). + In addition, if HostProcess is true then HostNetwork must also be set to true. + type: boolean + runAsUserName: + description: |- + The UserName in Windows to run the entrypoint of the container process. + Defaults to the user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. type: string - required: - - devicePath - - name type: object - type: array - volumeMounts: - description: |- - Pod volumes to mount into the container's filesystem. - Cannot be updated. - items: - description: - VolumeMount describes a mounting - of a Volume within a container. + type: object + startupProbe: + description: |- + StartupProbe indicates that the Pod has successfully initialized. + If specified, no other probes are executed until this completes successfully. + If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. + This can be used to provide different probe parameters at the beginning of a Pod's lifecycle, + when it might take a long time to load data or warm a cache, than during steady-state operation. + This cannot be updated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + properties: + exec: + description: Exec specifies the action to take. properties: - mountPath: + command: + description: |- + Command is the command line to execute inside the container, the working directory for the + command is root ('/') in the container's filesystem. The command is simply exec'd, it is + not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use + a shell, you need to explicitly call out to that shell. + Exit status of 0 is treated as live/healthy and non-zero is unhealthy. + items: + type: string + type: array + type: object + failureThreshold: + description: |- + Minimum consecutive failures for the probe to be considered failed after having succeeded. + Defaults to 3. Minimum value is 1. + format: int32 + type: integer + grpc: + description: GRPC specifies an action involving + a GRPC port. + properties: + port: + description: Port number of the gRPC service. + Number must be in the range 1 to 65535. + format: int32 + type: integer + service: description: |- - Path within the container at which the volume should be mounted. Must - not contain ':'. + Service is the name of the service to place in the gRPC HealthCheckRequest + (see https://github.com/grpc/grpc/blob/master/doc/health-checking.md). + + + If this is not specified, the default behavior is defined by gRPC. type: string - mountPropagation: + required: + - port + type: object + httpGet: + description: HTTPGet specifies the http request + to perform. + properties: + host: description: |- - mountPropagation determines how mounts are propagated from the host - to container and the other way around. - When not set, MountPropagationNone is used. - This field is beta in 1.10. + Host name to connect to, defaults to the pod IP. You probably want to set + "Host" in httpHeaders instead. type: string - name: - description: - This must match the Name of a - Volume. + httpHeaders: + description: Custom headers to set in the + request. HTTP allows repeated headers. + items: + description: HTTPHeader describes a custom + header to be used in HTTP probes + properties: + name: + description: |- + The header field name. + This will be canonicalized upon output, so case-variant names will be understood as the same header. + type: string + value: + description: The header field value + type: string + required: + - name + - value + type: object + type: array + path: + description: Path to access on the HTTP + server. type: string - readOnly: + port: + anyOf: + - type: integer + - type: string description: |- - Mounted read-only if true, read-write otherwise (false or unspecified). - Defaults to false. - type: boolean - subPath: + Name or number of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true + scheme: description: |- - Path within the volume from which the container's volume should be mounted. - Defaults to "" (volume's root). + Scheme to use for connecting to the host. + Defaults to HTTP. type: string - subPathExpr: - description: |- - Expanded path within the volume from which the container's volume should be mounted. - Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. - Defaults to "" (volume's root). - SubPathExpr and SubPath are mutually exclusive. + required: + - port + type: object + initialDelaySeconds: + description: |- + Number of seconds after the container has started before liveness probes are initiated. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + periodSeconds: + description: |- + How often (in seconds) to perform the probe. + Default to 10 seconds. Minimum value is 1. + format: int32 + type: integer + successThreshold: + description: |- + Minimum consecutive successes for the probe to be considered successful after having failed. + Defaults to 1. Must be 1 for liveness and startup. Minimum value is 1. + format: int32 + type: integer + tcpSocket: + description: TCPSocket specifies an action involving + a TCP port. + properties: + host: + description: 'Optional: Host name to connect + to, defaults to the pod IP.' type: string + port: + anyOf: + - type: integer + - type: string + description: |- + Number or name of the port to access on the container. + Number must be in the range 1 to 65535. + Name must be an IANA_SVC_NAME. + x-kubernetes-int-or-string: true required: - - mountPath - - name + - port type: object - type: array - workingDir: - description: |- - Container's working directory. - If not specified, the container runtime's default will be used, which - might be configured in the container image. - Cannot be updated. - type: string - required: - - name - type: object - type: array - nodeName: - description: |- - NodeName is a request to schedule this pod onto a specific node. If it is non-empty, - the scheduler simply schedules this pod onto that node, assuming that it fits resource - requirements. + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully upon probe failure. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this + value overrides the value provided by the pod spec. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. + Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset. + format: int64 + type: integer + timeoutSeconds: + description: |- + Number of seconds after which the probe times out. + Defaults to 1 second. Minimum value is 1. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probes + format: int32 + type: integer + type: object + stdin: + description: |- + Whether this container should allocate a buffer for stdin in the container runtime. If this + is not set, reads from stdin in the container will always result in EOF. + Default is false. + type: boolean + stdinOnce: + description: |- + Whether the container runtime should close the stdin channel after it has been opened by + a single attach. When stdin is true the stdin stream will remain open across multiple attach + sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the + first client attaches to stdin, and then remains open and accepts data until the client disconnects, + at which time stdin is closed and remains closed until the container is restarted. If this + flag is false, a container processes that reads from stdin will never receive an EOF. + Default is false + type: boolean + terminationMessagePath: + description: |- + Optional: Path at which the file to which the container's termination message + will be written is mounted into the container's filesystem. + Message written is intended to be brief final status, such as an assertion failure message. + Will be truncated by the node if greater than 4096 bytes. The total message length across + all containers will be limited to 12kb. + Defaults to /dev/termination-log. + Cannot be updated. + type: string + terminationMessagePolicy: + description: |- + Indicate how the termination message should be populated. File will use the contents of + terminationMessagePath to populate the container status message on both success and failure. + FallbackToLogsOnError will use the last chunk of container log output if the termination + message file is empty and the container exited with an error. + The log output is limited to 2048 bytes or 80 lines, whichever is smaller. + Defaults to File. + Cannot be updated. + type: string + tty: + description: |- + Whether this container should allocate a TTY for itself, also requires 'stdin' to be true. + Default is false. + type: boolean + volumeDevices: + description: volumeDevices is the list of block + devices to be used by the container. + items: + description: volumeDevice describes a mapping + of a raw block device within a container. + properties: + devicePath: + description: devicePath is the path inside + of the container that the device will be + mapped to. + type: string + name: + description: name must match the name of a + persistentVolumeClaim in the pod + type: string + required: + - devicePath + - name + type: object + type: array + volumeMounts: + description: |- + Pod volumes to mount into the container's filesystem. + Cannot be updated. + items: + description: VolumeMount describes a mounting + of a Volume within a container. + properties: + mountPath: + description: |- + Path within the container at which the volume should be mounted. Must + not contain ':'. + type: string + mountPropagation: + description: |- + mountPropagation determines how mounts are propagated from the host + to container and the other way around. + When not set, MountPropagationNone is used. + This field is beta in 1.10. + type: string + name: + description: This must match the Name of a + Volume. + type: string + readOnly: + description: |- + Mounted read-only if true, read-write otherwise (false or unspecified). + Defaults to false. + type: boolean + subPath: + description: |- + Path within the volume from which the container's volume should be mounted. + Defaults to "" (volume's root). + type: string + subPathExpr: + description: |- + Expanded path within the volume from which the container's volume should be mounted. + Behaves similarly to SubPath but environment variable references $(VAR_NAME) are expanded using the container's environment. + Defaults to "" (volume's root). + SubPathExpr and SubPath are mutually exclusive. + type: string + required: + - mountPath + - name + type: object + type: array + workingDir: + description: |- + Container's working directory. + If not specified, the container runtime's default will be used, which + might be configured in the container image. + Cannot be updated. + type: string + required: + - name + type: object + type: array + nodeName: + description: |- + NodeName is a request to schedule this pod onto a specific node. If it is non-empty, + the scheduler simply schedules this pod onto that node, assuming that it fits resource + requirements. + type: string + nodeSelector: + additionalProperties: type: string - nodeSelector: - additionalProperties: + description: |- + NodeSelector is a selector which must be true for the pod to fit on a node. + Selector which must match a node's labels for the pod to be scheduled on that node. + More info: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/ + type: object + x-kubernetes-map-type: atomic + os: + description: |- + Specifies the OS of the containers in the pod. + Some pod and container fields are restricted if this is set. + + + If the OS field is set to linux, the following fields must be unset: + -securityContext.windowsOptions + + + If the OS field is set to windows, following fields must be unset: + - spec.hostPID + - spec.hostIPC + - spec.hostUsers + - spec.securityContext.seLinuxOptions + - spec.securityContext.seccompProfile + - spec.securityContext.fsGroup + - spec.securityContext.fsGroupChangePolicy + - spec.securityContext.sysctls + - spec.shareProcessNamespace + - spec.securityContext.runAsUser + - spec.securityContext.runAsGroup + - spec.securityContext.supplementalGroups + - spec.containers[*].securityContext.seLinuxOptions + - spec.containers[*].securityContext.seccompProfile + - spec.containers[*].securityContext.capabilities + - spec.containers[*].securityContext.readOnlyRootFilesystem + - spec.containers[*].securityContext.privileged + - spec.containers[*].securityContext.allowPrivilegeEscalation + - spec.containers[*].securityContext.procMount + - spec.containers[*].securityContext.runAsUser + - spec.containers[*].securityContext.runAsGroup + properties: + name: + description: |- + Name is the name of the operating system. The currently supported values are linux and windows. + Additional value may be defined in future and can be one of: + https://github.com/opencontainers/runtime-spec/blob/master/config.md#platform-specific-configuration + Clients should expect to handle additional values and treat unrecognized values in this field as os: null type: string - description: |- - NodeSelector is a selector which must be true for the pod to fit on a node. - Selector which must match a node's labels for the pod to be scheduled on that node. - More info: https://kubernetes.io/docs/concepts/configuration/assign-pod-node/ + required: + - name + type: object + overhead: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Overhead represents the resource overhead associated with running a pod for a given RuntimeClass. + This field will be autopopulated at admission time by the RuntimeClass admission controller. If + the RuntimeClass admission controller is enabled, overhead must not be set in Pod create requests. + The RuntimeClass admission controller will reject Pod create requests which have the overhead already + set. If RuntimeClass is configured and selected in the PodSpec, Overhead will be set to the value + defined in the corresponding RuntimeClass, otherwise it will remain unset and treated as zero. + More info: https://git.k8s.io/enhancements/keps/sig-node/688-pod-overhead/README.md + type: object + preemptionPolicy: + description: |- + PreemptionPolicy is the Policy for preempting pods with lower priority. + One of Never, PreemptLowerPriority. + Defaults to PreemptLowerPriority if unset. + type: string + priority: + description: |- + The priority value. Various system components use this field to find the + priority of the pod. When Priority Admission Controller is enabled, it + prevents users from setting this field. The admission controller populates + this field from PriorityClassName. + The higher the value, the higher the priority. + format: int32 + type: integer + priorityClassName: + description: |- + If specified, indicates the pod's priority. "system-node-critical" and + "system-cluster-critical" are two special keywords which indicate the + highest priorities with the former being the highest priority. Any other + name must be defined by creating a PriorityClass object with that name. + If not specified, the pod priority will be default or zero if there is no + default. + type: string + readinessGates: + description: |- + If specified, all readiness gates will be evaluated for pod readiness. + A pod is ready when all its containers are ready AND + all conditions specified in the readiness gates have status equal to "True" + More info: https://git.k8s.io/enhancements/keps/sig-network/580-pod-readiness-gates + items: + description: PodReadinessGate contains the reference + to a pod condition + properties: + conditionType: + description: ConditionType refers to a condition + in the pod's condition list with matching type. + type: string + required: + - conditionType type: object - x-kubernetes-map-type: atomic - os: + type: array + resourceClaims: + description: |- + ResourceClaims defines which ResourceClaims must be allocated + and reserved before the Pod is allowed to start. The resources + will be made available to those containers which consume them + by name. + + + This is an alpha field and requires enabling the + DynamicResourceAllocation feature gate. + + + This field is immutable. + items: description: |- - Specifies the OS of the containers in the pod. - Some pod and container fields are restricted if this is set. - - - If the OS field is set to linux, the following fields must be unset: - -securityContext.windowsOptions - - - If the OS field is set to windows, following fields must be unset: - - spec.hostPID - - spec.hostIPC - - spec.hostUsers - - spec.securityContext.seLinuxOptions - - spec.securityContext.seccompProfile - - spec.securityContext.fsGroup - - spec.securityContext.fsGroupChangePolicy - - spec.securityContext.sysctls - - spec.shareProcessNamespace - - spec.securityContext.runAsUser - - spec.securityContext.runAsGroup - - spec.securityContext.supplementalGroups - - spec.containers[*].securityContext.seLinuxOptions - - spec.containers[*].securityContext.seccompProfile - - spec.containers[*].securityContext.capabilities - - spec.containers[*].securityContext.readOnlyRootFilesystem - - spec.containers[*].securityContext.privileged - - spec.containers[*].securityContext.allowPrivilegeEscalation - - spec.containers[*].securityContext.procMount - - spec.containers[*].securityContext.runAsUser - - spec.containers[*].securityContext.runAsGroup + PodResourceClaim references exactly one ResourceClaim through a ClaimSource. + It adds a name to it that uniquely identifies the ResourceClaim inside the Pod. + Containers that need access to the ResourceClaim reference it with this name. properties: name: description: |- - Name is the name of the operating system. The currently supported values are linux and windows. - Additional value may be defined in future and can be one of: - https://github.com/opencontainers/runtime-spec/blob/master/config.md#platform-specific-configuration - Clients should expect to handle additional values and treat unrecognized values in this field as os: null + Name uniquely identifies this resource claim inside the pod. + This must be a DNS_LABEL. type: string + source: + description: Source describes where to find the + ResourceClaim. + properties: + resourceClaimName: + description: |- + ResourceClaimName is the name of a ResourceClaim object in the same + namespace as this pod. + type: string + resourceClaimTemplateName: + description: |- + ResourceClaimTemplateName is the name of a ResourceClaimTemplate + object in the same namespace as this pod. + + + The template will be used to create a new ResourceClaim, which will + be bound to this pod. When this pod is deleted, the ResourceClaim + will also be deleted. The pod name and resource name, along with a + generated component, will be used to form a unique name for the + ResourceClaim, which will be recorded in pod.status.resourceClaimStatuses. + + + This field is immutable and no changes will be made to the + corresponding ResourceClaim by the control plane after creating the + ResourceClaim. + type: string + type: object required: - - name + - name type: object - overhead: - additionalProperties: - anyOf: - - type: integer - - type: string - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ - x-kubernetes-int-or-string: true - description: |- - Overhead represents the resource overhead associated with running a pod for a given RuntimeClass. - This field will be autopopulated at admission time by the RuntimeClass admission controller. If - the RuntimeClass admission controller is enabled, overhead must not be set in Pod create requests. - The RuntimeClass admission controller will reject Pod create requests which have the overhead already - set. If RuntimeClass is configured and selected in the PodSpec, Overhead will be set to the value - defined in the corresponding RuntimeClass, otherwise it will remain unset and treated as zero. - More info: https://git.k8s.io/enhancements/keps/sig-node/688-pod-overhead/README.md + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + restartPolicy: + description: |- + Restart policy for all containers within the pod. + One of Always, OnFailure, Never. In some contexts, only a subset of those values may be permitted. + Default to Always. + More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#restart-policy + type: string + runtimeClassName: + description: |- + RuntimeClassName refers to a RuntimeClass object in the node.k8s.io group, which should be used + to run this pod. If no RuntimeClass resource matches the named class, the pod will not be run. + If unset or empty, the "legacy" RuntimeClass will be used, which is an implicit class with an + empty definition that uses the default runtime handler. + More info: https://git.k8s.io/enhancements/keps/sig-node/585-runtime-class + type: string + schedulerName: + description: |- + If specified, the pod will be dispatched by specified scheduler. + If not specified, the pod will be dispatched by default scheduler. + type: string + schedulingGates: + description: |- + SchedulingGates is an opaque list of values that if specified will block scheduling the pod. + If schedulingGates is not empty, the pod will stay in the SchedulingGated state and the + scheduler will not attempt to schedule the pod. + + + SchedulingGates can only be set at pod creation time, and be removed only afterwards. + + + This is a beta feature enabled by the PodSchedulingReadiness feature gate. + items: + description: PodSchedulingGate is associated to a Pod + to guard its scheduling. + properties: + name: + description: |- + Name of the scheduling gate. + Each scheduling gate must have a unique name field. + type: string + required: + - name type: object - preemptionPolicy: - description: |- - PreemptionPolicy is the Policy for preempting pods with lower priority. - One of Never, PreemptLowerPriority. - Defaults to PreemptLowerPriority if unset. - type: string - priority: - description: |- - The priority value. Various system components use this field to find the - priority of the pod. When Priority Admission Controller is enabled, it - prevents users from setting this field. The admission controller populates - this field from PriorityClassName. - The higher the value, the higher the priority. - format: int32 - type: integer - priorityClassName: - description: |- - If specified, indicates the pod's priority. "system-node-critical" and - "system-cluster-critical" are two special keywords which indicate the - highest priorities with the former being the highest priority. Any other - name must be defined by creating a PriorityClass object with that name. - If not specified, the pod priority will be default or zero if there is no - default. - type: string - readinessGates: - description: |- - If specified, all readiness gates will be evaluated for pod readiness. - A pod is ready when all its containers are ready AND - all conditions specified in the readiness gates have status equal to "True" - More info: https://git.k8s.io/enhancements/keps/sig-network/580-pod-readiness-gates - items: - description: - PodReadinessGate contains the reference - to a pod condition - properties: - conditionType: - description: - ConditionType refers to a condition - in the pod's condition list with matching type. - type: string - required: - - conditionType - type: object - type: array - resourceClaims: - description: |- - ResourceClaims defines which ResourceClaims must be allocated - and reserved before the Pod is allowed to start. The resources - will be made available to those containers which consume them - by name. + type: array + x-kubernetes-list-map-keys: + - name + x-kubernetes-list-type: map + securityContext: + description: |- + SecurityContext holds pod-level security attributes and common container settings. + Optional: Defaults to empty. See type description for default values of each field. + properties: + fsGroup: + description: |- + A special supplemental group that applies to all containers in a pod. + Some volume types allow the Kubelet to change the ownership of that volume + to be owned by the pod: - This is an alpha field and requires enabling the - DynamicResourceAllocation feature gate. + 1. The owning GID will be the FSGroup + 2. The setgid bit is set (new files created in the volume will be owned by FSGroup) + 3. The permission bits are OR'd with rw-rw---- - This field is immutable. - items: + If unset, the Kubelet will not modify the ownership and permissions of any volume. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + fsGroupChangePolicy: + description: |- + fsGroupChangePolicy defines behavior of changing ownership and permission of the volume + before being exposed inside Pod. This field will only apply to + volume types which support fsGroup based ownership(and permissions). + It will have no effect on ephemeral volume types such as: secret, configmaps + and emptydir. + Valid values are "OnRootMismatch" and "Always". If not specified, "Always" is used. + Note that this field cannot be set when spec.os.name is windows. + type: string + runAsGroup: + description: |- + The GID to run the entrypoint of the container process. + Uses runtime default if unset. + May also be set in SecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence + for that container. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + runAsNonRoot: description: |- - PodResourceClaim references exactly one ResourceClaim through a ClaimSource. - It adds a name to it that uniquely identifies the ResourceClaim inside the Pod. - Containers that need access to the ResourceClaim reference it with this name. + Indicates that the container must run as a non-root user. + If true, the Kubelet will validate the image at runtime to ensure that it + does not run as UID 0 (root) and fail to start the container if it does. + If unset or false, no such validation will be performed. + May also be set in SecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. + type: boolean + runAsUser: + description: |- + The UID to run the entrypoint of the container process. + Defaults to user specified in image metadata if unspecified. + May also be set in SecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence + for that container. + Note that this field cannot be set when spec.os.name is windows. + format: int64 + type: integer + seLinuxOptions: + description: |- + The SELinux context to be applied to all containers. + If unspecified, the container runtime will allocate a random SELinux context for each + container. May also be set in SecurityContext. If set in + both SecurityContext and PodSecurityContext, the value specified in SecurityContext + takes precedence for that container. + Note that this field cannot be set when spec.os.name is windows. + properties: + level: + description: Level is SELinux level label that + applies to the container. + type: string + role: + description: Role is a SELinux role label that + applies to the container. + type: string + type: + description: Type is a SELinux type label that + applies to the container. + type: string + user: + description: User is a SELinux user label that + applies to the container. + type: string + type: object + seccompProfile: + description: |- + The seccomp options to use by the containers in this pod. + Note that this field cannot be set when spec.os.name is windows. properties: - name: + localhostProfile: description: |- - Name uniquely identifies this resource claim inside the pod. - This must be a DNS_LABEL. + localhostProfile indicates a profile defined in a file on the node should be used. + The profile must be preconfigured on the node to work. + Must be a descending path, relative to the kubelet's configured seccomp profile location. + Must be set if type is "Localhost". Must NOT be set for any other type. type: string - source: - description: - Source describes where to find the - ResourceClaim. - properties: - resourceClaimName: - description: |- - ResourceClaimName is the name of a ResourceClaim object in the same - namespace as this pod. - type: string - resourceClaimTemplateName: - description: |- - ResourceClaimTemplateName is the name of a ResourceClaimTemplate - object in the same namespace as this pod. - - - The template will be used to create a new ResourceClaim, which will - be bound to this pod. When this pod is deleted, the ResourceClaim - will also be deleted. The pod name and resource name, along with a - generated component, will be used to form a unique name for the - ResourceClaim, which will be recorded in pod.status.resourceClaimStatuses. + type: + description: |- + type indicates which kind of seccomp profile will be applied. + Valid options are: - This field is immutable and no changes will be made to the - corresponding ResourceClaim by the control plane after creating the - ResourceClaim. - type: string - type: object + Localhost - a profile defined in a file on the node should be used. + RuntimeDefault - the container runtime default profile should be used. + Unconfined - no profile should be applied. + type: string required: - - name + - type type: object - type: array - x-kubernetes-list-map-keys: - - name - x-kubernetes-list-type: map - restartPolicy: - description: |- - Restart policy for all containers within the pod. - One of Always, OnFailure, Never. In some contexts, only a subset of those values may be permitted. - Default to Always. - More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#restart-policy - type: string - runtimeClassName: - description: |- - RuntimeClassName refers to a RuntimeClass object in the node.k8s.io group, which should be used - to run this pod. If no RuntimeClass resource matches the named class, the pod will not be run. - If unset or empty, the "legacy" RuntimeClass will be used, which is an implicit class with an - empty definition that uses the default runtime handler. - More info: https://git.k8s.io/enhancements/keps/sig-node/585-runtime-class - type: string - schedulerName: - description: |- - If specified, the pod will be dispatched by specified scheduler. - If not specified, the pod will be dispatched by default scheduler. - type: string - schedulingGates: - description: |- - SchedulingGates is an opaque list of values that if specified will block scheduling the pod. - If schedulingGates is not empty, the pod will stay in the SchedulingGated state and the - scheduler will not attempt to schedule the pod. - - - SchedulingGates can only be set at pod creation time, and be removed only afterwards. - - - This is a beta feature enabled by the PodSchedulingReadiness feature gate. - items: - description: - PodSchedulingGate is associated to a Pod - to guard its scheduling. + supplementalGroups: + description: |- + A list of groups applied to the first process run in each container, in addition + to the container's primary GID, the fsGroup (if specified), and group memberships + defined in the container image for the uid of the container process. If unspecified, + no additional groups are added to any container. Note that group memberships + defined in the container image for the uid of the container process are still effective, + even if they are not included in this list. + Note that this field cannot be set when spec.os.name is windows. + items: + format: int64 + type: integer + type: array + sysctls: + description: |- + Sysctls hold a list of namespaced sysctls used for the pod. Pods with unsupported + sysctls (by the container runtime) might fail to launch. + Note that this field cannot be set when spec.os.name is windows. + items: + description: Sysctl defines a kernel parameter to + be set + properties: + name: + description: Name of a property to set + type: string + value: + description: Value of a property to set + type: string + required: + - name + - value + type: object + type: array + windowsOptions: + description: |- + The Windows specific settings applied to all containers. + If unspecified, the options within a container's SecurityContext will be used. + If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. + Note that this field cannot be set when spec.os.name is linux. properties: - name: + gmsaCredentialSpec: description: |- - Name of the scheduling gate. - Each scheduling gate must have a unique name field. + GMSACredentialSpec is where the GMSA admission webhook + (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the + GMSA credential spec named by the GMSACredentialSpecName field. + type: string + gmsaCredentialSpecName: + description: GMSACredentialSpecName is the name + of the GMSA credential spec to use. + type: string + hostProcess: + description: |- + HostProcess determines if a container should be run as a 'Host Process' container. + All of a Pod's containers must have the same effective HostProcess value + (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). + In addition, if HostProcess is true then HostNetwork must also be set to true. + type: boolean + runAsUserName: + description: |- + The UserName in Windows to run the entrypoint of the container process. + Defaults to the user specified in image metadata if unspecified. + May also be set in PodSecurityContext. If set in both SecurityContext and + PodSecurityContext, the value specified in SecurityContext takes precedence. type: string - required: - - name type: object - type: array - x-kubernetes-list-map-keys: - - name - x-kubernetes-list-type: map - securityContext: + type: object + serviceAccount: + description: |- + DeprecatedServiceAccount is a depreciated alias for ServiceAccountName. + Deprecated: Use serviceAccountName instead. + type: string + serviceAccountName: + description: |- + ServiceAccountName is the name of the ServiceAccount to use to run this pod. + More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/ + type: string + setHostnameAsFQDN: + description: |- + If true the pod's hostname will be configured as the pod's FQDN, rather than the leaf name (the default). + In Linux containers, this means setting the FQDN in the hostname field of the kernel (the nodename field of struct utsname). + In Windows containers, this means setting the registry value of hostname for the registry key HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters to FQDN. + If a pod does not have FQDN, this has no effect. + Default to false. + type: boolean + shareProcessNamespace: + description: |- + Share a single process namespace between all of the containers in a pod. + When this is set containers will be able to view and signal processes from other containers + in the same pod, and the first process in each container will not be assigned PID 1. + HostPID and ShareProcessNamespace cannot both be set. + Optional: Default to false. + type: boolean + subdomain: + description: |- + If specified, the fully qualified Pod hostname will be "...svc.". + If not specified, the pod will not have a domainname at all. + type: string + terminationGracePeriodSeconds: + description: |- + Optional duration in seconds the pod needs to terminate gracefully. May be decreased in delete request. + Value must be non-negative integer. The value zero indicates stop immediately via + the kill signal (no opportunity to shut down). + If this value is nil, the default grace period will be used instead. + The grace period is the duration in seconds after the processes running in the pod are sent + a termination signal and the time when the processes are forcibly halted with a kill signal. + Set this value longer than the expected cleanup time for your process. + Defaults to 30 seconds. + format: int64 + type: integer + tolerations: + description: If specified, the pod's tolerations. + items: description: |- - SecurityContext holds pod-level security attributes and common container settings. - Optional: Defaults to empty. See type description for default values of each field. + The pod this Toleration is attached to tolerates any taint that matches + the triple using the matching operator . properties: - fsGroup: + effect: description: |- - A special supplemental group that applies to all containers in a pod. - Some volume types allow the Kubelet to change the ownership of that volume - to be owned by the pod: - - - 1. The owning GID will be the FSGroup - 2. The setgid bit is set (new files created in the volume will be owned by FSGroup) - 3. The permission bits are OR'd with rw-rw---- - - - If unset, the Kubelet will not modify the ownership and permissions of any volume. - Note that this field cannot be set when spec.os.name is windows. + Effect indicates the taint effect to match. Empty means match all taint effects. + When specified, allowed values are NoSchedule, PreferNoSchedule and NoExecute. + type: string + key: + description: |- + Key is the taint key that the toleration applies to. Empty means match all taint keys. + If the key is empty, operator must be Exists; this combination means to match all values and all keys. + type: string + operator: + description: |- + Operator represents a key's relationship to the value. + Valid operators are Exists and Equal. Defaults to Equal. + Exists is equivalent to wildcard for value, so that a pod can + tolerate all taints of a particular category. + type: string + tolerationSeconds: + description: |- + TolerationSeconds represents the period of time the toleration (which must be + of effect NoExecute, otherwise this field is ignored) tolerates the taint. By default, + it is not set, which means tolerate the taint forever (do not evict). Zero and + negative values will be treated as 0 (evict immediately) by the system. format: int64 type: integer - fsGroupChangePolicy: - description: |- - fsGroupChangePolicy defines behavior of changing ownership and permission of the volume - before being exposed inside Pod. This field will only apply to - volume types which support fsGroup based ownership(and permissions). - It will have no effect on ephemeral volume types such as: secret, configmaps - and emptydir. - Valid values are "OnRootMismatch" and "Always". If not specified, "Always" is used. - Note that this field cannot be set when spec.os.name is windows. + value: + description: |- + Value is the taint value the toleration matches to. + If the operator is Exists, the value should be empty, otherwise just a regular string. type: string - runAsGroup: - description: |- - The GID to run the entrypoint of the container process. - Uses runtime default if unset. - May also be set in SecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence - for that container. - Note that this field cannot be set when spec.os.name is windows. - format: int64 + type: object + type: array + topologySpreadConstraints: + description: |- + TopologySpreadConstraints describes how a group of pods ought to spread across topology + domains. Scheduler will schedule pods in a way which abides by the constraints. + All topologySpreadConstraints are ANDed. + items: + description: TopologySpreadConstraint specifies how + to spread matching pods among the given topology. + properties: + labelSelector: + description: |- + LabelSelector is used to find matching pods. + Pods that match this label selector are counted to determine the number of pods + in their corresponding topology domain. + properties: + matchExpressions: + description: matchExpressions is a list of label + selector requirements. The requirements are + ANDed. + items: + description: |- + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. + properties: + key: + description: key is the label key that + the selector applies to. + type: string + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. + items: + type: string + type: array + required: + - key + - operator + type: object + type: array + matchLabels: + additionalProperties: + type: string + description: |- + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. + type: object + type: object + x-kubernetes-map-type: atomic + matchLabelKeys: + description: |- + MatchLabelKeys is a set of pod label keys to select the pods over which + spreading will be calculated. The keys are used to lookup values from the + incoming pod labels, those key-value labels are ANDed with labelSelector + to select the group of existing pods over which spreading will be calculated + for the incoming pod. The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. + MatchLabelKeys cannot be set when LabelSelector isn't set. + Keys that don't exist in the incoming pod labels will + be ignored. A null or empty list means only match against labelSelector. + + + This is a beta field and requires the MatchLabelKeysInPodTopologySpread feature gate to be enabled (enabled by default). + items: + type: string + type: array + x-kubernetes-list-type: atomic + maxSkew: + description: |- + MaxSkew describes the degree to which pods may be unevenly distributed. + When `whenUnsatisfiable=DoNotSchedule`, it is the maximum permitted difference + between the number of matching pods in the target topology and the global minimum. + The global minimum is the minimum number of matching pods in an eligible domain + or zero if the number of eligible domains is less than MinDomains. + For example, in a 3-zone cluster, MaxSkew is set to 1, and pods with the same + labelSelector spread as 2/2/1: + In this case, the global minimum is 1. + | zone1 | zone2 | zone3 | + | P P | P P | P | + - if MaxSkew is 1, incoming pod can only be scheduled to zone3 to become 2/2/2; + scheduling it onto zone1(zone2) would make the ActualSkew(3-1) on zone1(zone2) + violate MaxSkew(1). + - if MaxSkew is 2, incoming pod can be scheduled onto any zone. + When `whenUnsatisfiable=ScheduleAnyway`, it is used to give higher precedence + to topologies that satisfy it. + It's a required field. Default value is 1 and 0 is not allowed. + format: int32 type: integer - runAsNonRoot: - description: |- - Indicates that the container must run as a non-root user. - If true, the Kubelet will validate the image at runtime to ensure that it - does not run as UID 0 (root) and fail to start the container if it does. - If unset or false, no such validation will be performed. - May also be set in SecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. - type: boolean - runAsUser: - description: |- - The UID to run the entrypoint of the container process. - Defaults to user specified in image metadata if unspecified. - May also be set in SecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence - for that container. - Note that this field cannot be set when spec.os.name is windows. - format: int64 + minDomains: + description: |- + MinDomains indicates a minimum number of eligible domains. + When the number of eligible domains with matching topology keys is less than minDomains, + Pod Topology Spread treats "global minimum" as 0, and then the calculation of Skew is performed. + And when the number of eligible domains with matching topology keys equals or greater than minDomains, + this value has no effect on scheduling. + As a result, when the number of eligible domains is less than minDomains, + scheduler won't schedule more than maxSkew Pods to those domains. + If value is nil, the constraint behaves as if MinDomains is equal to 1. + Valid values are integers greater than 0. + When value is not nil, WhenUnsatisfiable must be DoNotSchedule. + + + For example, in a 3-zone cluster, MaxSkew is set to 2, MinDomains is set to 5 and pods with the same + labelSelector spread as 2/2/2: + | zone1 | zone2 | zone3 | + | P P | P P | P P | + The number of domains is less than 5(MinDomains), so "global minimum" is treated as 0. + In this situation, new pod with the same labelSelector cannot be scheduled, + because computed skew will be 3(3 - 0) if new Pod is scheduled to any of the three zones, + it will violate MaxSkew. + + + This is a beta field and requires the MinDomainsInPodTopologySpread feature gate to be enabled (enabled by default). + format: int32 type: integer - seLinuxOptions: - description: |- - The SELinux context to be applied to all containers. - If unspecified, the container runtime will allocate a random SELinux context for each - container. May also be set in SecurityContext. If set in - both SecurityContext and PodSecurityContext, the value specified in SecurityContext - takes precedence for that container. - Note that this field cannot be set when spec.os.name is windows. + nodeAffinityPolicy: + description: |- + NodeAffinityPolicy indicates how we will treat Pod's nodeAffinity/nodeSelector + when calculating pod topology spread skew. Options are: + - Honor: only nodes matching nodeAffinity/nodeSelector are included in the calculations. + - Ignore: nodeAffinity/nodeSelector are ignored. All nodes are included in the calculations. + + + If this value is nil, the behavior is equivalent to the Honor policy. + This is a beta-level feature default enabled by the NodeInclusionPolicyInPodTopologySpread feature flag. + type: string + nodeTaintsPolicy: + description: |- + NodeTaintsPolicy indicates how we will treat node taints when calculating + pod topology spread skew. Options are: + - Honor: nodes without taints, along with tainted nodes for which the incoming pod + has a toleration, are included. + - Ignore: node taints are ignored. All nodes are included. + + + If this value is nil, the behavior is equivalent to the Ignore policy. + This is a beta-level feature default enabled by the NodeInclusionPolicyInPodTopologySpread feature flag. + type: string + topologyKey: + description: |- + TopologyKey is the key of node labels. Nodes that have a label with this key + and identical values are considered to be in the same topology. + We consider each as a "bucket", and try to put balanced number + of pods into each bucket. + We define a domain as a particular instance of a topology. + Also, we define an eligible domain as a domain whose nodes meet the requirements of + nodeAffinityPolicy and nodeTaintsPolicy. + e.g. If TopologyKey is "kubernetes.io/hostname", each Node is a domain of that topology. + And, if TopologyKey is "topology.kubernetes.io/zone", each zone is a domain of that topology. + It's a required field. + type: string + whenUnsatisfiable: + description: |- + WhenUnsatisfiable indicates how to deal with a pod if it doesn't satisfy + the spread constraint. + - DoNotSchedule (default) tells the scheduler not to schedule it. + - ScheduleAnyway tells the scheduler to schedule the pod in any location, + but giving higher precedence to topologies that would help reduce the + skew. + A constraint is considered "Unsatisfiable" for an incoming pod + if and only if every possible node assignment for that pod would violate + "MaxSkew" on some topology. + For example, in a 3-zone cluster, MaxSkew is set to 1, and pods with the same + labelSelector spread as 3/1/1: + | zone1 | zone2 | zone3 | + | P P P | P | P | + If WhenUnsatisfiable is set to DoNotSchedule, incoming pod can only be scheduled + to zone2(zone3) to become 3/2/1(3/1/2) as ActualSkew(2-1) on zone2(zone3) satisfies + MaxSkew(1). In other words, the cluster can still be imbalanced, but scheduler + won't make it *more* imbalanced. + It's a required field. + type: string + required: + - maxSkew + - topologyKey + - whenUnsatisfiable + type: object + type: array + x-kubernetes-list-map-keys: + - topologyKey + - whenUnsatisfiable + x-kubernetes-list-type: map + volumes: + description: |- + List of volumes that can be mounted by containers belonging to the pod. + More info: https://kubernetes.io/docs/concepts/storage/volumes + items: + description: Volume represents a named volume in a pod + that may be accessed by any container in the pod. + properties: + awsElasticBlockStore: + description: |- + awsElasticBlockStore represents an AWS Disk resource that is attached to a + kubelet's host machine and then exposed to the pod. + More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore + properties: + fsType: + description: |- + fsType is the filesystem type of the volume that you want to mount. + Tip: Ensure that the filesystem type is supported by the host operating system. + Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. + More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore + TODO: how do we prevent errors in the filesystem from compromising the machine + type: string + partition: + description: |- + partition is the partition in the volume that you want to mount. + If omitted, the default is to mount by volume name. + Examples: For volume /dev/sda1, you specify the partition as "1". + Similarly, the volume partition for /dev/sda is "0" (or you can leave the property empty). + format: int32 + type: integer + readOnly: + description: |- + readOnly value true will force the readOnly setting in VolumeMounts. + More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore + type: boolean + volumeID: + description: |- + volumeID is unique ID of the persistent disk resource in AWS (Amazon EBS volume). + More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore + type: string + required: + - volumeID + type: object + azureDisk: + description: azureDisk represents an Azure Data + Disk mount on the host and bind mount to the pod. properties: - level: - description: - Level is SELinux level label that - applies to the container. + cachingMode: + description: 'cachingMode is the Host Caching + mode: None, Read Only, Read Write.' type: string - role: - description: - Role is a SELinux role label that - applies to the container. + diskName: + description: diskName is the Name of the data + disk in the blob storage type: string - type: - description: - Type is a SELinux type label that - applies to the container. + diskURI: + description: diskURI is the URI of data disk + in the blob storage type: string - user: - description: - User is a SELinux user label that - applies to the container. + fsType: + description: |- + fsType is Filesystem type to mount. + Must be a filesystem type supported by the host operating system. + Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. + type: string + kind: + description: 'kind expected values are Shared: + multiple blob disks per storage account Dedicated: + single blob disk per storage account Managed: + azure managed data disk (only in managed availability + set). defaults to shared' type: string + readOnly: + description: |- + readOnly Defaults to false (read/write). ReadOnly here will force + the ReadOnly setting in VolumeMounts. + type: boolean + required: + - diskName + - diskURI type: object - seccompProfile: - description: |- - The seccomp options to use by the containers in this pod. - Note that this field cannot be set when spec.os.name is windows. + azureFile: + description: azureFile represents an Azure File + Service mount on the host and bind mount to the + pod. properties: - localhostProfile: + readOnly: description: |- - localhostProfile indicates a profile defined in a file on the node should be used. - The profile must be preconfigured on the node to work. - Must be a descending path, relative to the kubelet's configured seccomp profile location. - Must be set if type is "Localhost". Must NOT be set for any other type. + readOnly defaults to false (read/write). ReadOnly here will force + the ReadOnly setting in VolumeMounts. + type: boolean + secretName: + description: secretName is the name of secret + that contains Azure Storage Account Name and + Key type: string - type: - description: |- - type indicates which kind of seccomp profile will be applied. - Valid options are: - - - Localhost - a profile defined in a file on the node should be used. - RuntimeDefault - the container runtime default profile should be used. - Unconfined - no profile should be applied. + shareName: + description: shareName is the azure share Name type: string required: - - type + - secretName + - shareName type: object - supplementalGroups: - description: |- - A list of groups applied to the first process run in each container, in addition - to the container's primary GID, the fsGroup (if specified), and group memberships - defined in the container image for the uid of the container process. If unspecified, - no additional groups are added to any container. Note that group memberships - defined in the container image for the uid of the container process are still effective, - even if they are not included in this list. - Note that this field cannot be set when spec.os.name is windows. - items: - format: int64 - type: integer - type: array - sysctls: - description: |- - Sysctls hold a list of namespaced sysctls used for the pod. Pods with unsupported - sysctls (by the container runtime) might fail to launch. - Note that this field cannot be set when spec.os.name is windows. - items: - description: - Sysctl defines a kernel parameter to - be set - properties: - name: - description: Name of a property to set - type: string - value: - description: Value of a property to set - type: string - required: - - name - - value - type: object - type: array - windowsOptions: - description: |- - The Windows specific settings applied to all containers. - If unspecified, the options within a container's SecurityContext will be used. - If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. - Note that this field cannot be set when spec.os.name is linux. + cephfs: + description: cephFS represents a Ceph FS mount on + the host that shares a pod's lifetime properties: - gmsaCredentialSpec: + monitors: description: |- - GMSACredentialSpec is where the GMSA admission webhook - (https://github.com/kubernetes-sigs/windows-gmsa) inlines the contents of the - GMSA credential spec named by the GMSACredentialSpecName field. - type: string - gmsaCredentialSpecName: - description: - GMSACredentialSpecName is the name - of the GMSA credential spec to use. + monitors is Required: Monitors is a collection of Ceph monitors + More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it + items: + type: string + type: array + path: + description: 'path is Optional: Used as the + mounted root, rather than the full Ceph tree, + default is /' type: string - hostProcess: + readOnly: description: |- - HostProcess determines if a container should be run as a 'Host Process' container. - All of a Pod's containers must have the same effective HostProcess value - (it is not allowed to have a mix of HostProcess containers and non-HostProcess containers). - In addition, if HostProcess is true then HostNetwork must also be set to true. + readOnly is Optional: Defaults to false (read/write). ReadOnly here will force + the ReadOnly setting in VolumeMounts. + More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it type: boolean - runAsUserName: + secretFile: description: |- - The UserName in Windows to run the entrypoint of the container process. - Defaults to the user specified in image metadata if unspecified. - May also be set in PodSecurityContext. If set in both SecurityContext and - PodSecurityContext, the value specified in SecurityContext takes precedence. + secretFile is Optional: SecretFile is the path to key ring for User, default is /etc/ceph/user.secret + More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it type: string - type: object - type: object - serviceAccount: - description: |- - DeprecatedServiceAccount is a depreciated alias for ServiceAccountName. - Deprecated: Use serviceAccountName instead. - type: string - serviceAccountName: - description: |- - ServiceAccountName is the name of the ServiceAccount to use to run this pod. - More info: https://kubernetes.io/docs/tasks/configure-pod-container/configure-service-account/ - type: string - setHostnameAsFQDN: - description: |- - If true the pod's hostname will be configured as the pod's FQDN, rather than the leaf name (the default). - In Linux containers, this means setting the FQDN in the hostname field of the kernel (the nodename field of struct utsname). - In Windows containers, this means setting the registry value of hostname for the registry key HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\Tcpip\\Parameters to FQDN. - If a pod does not have FQDN, this has no effect. - Default to false. - type: boolean - shareProcessNamespace: - description: |- - Share a single process namespace between all of the containers in a pod. - When this is set containers will be able to view and signal processes from other containers - in the same pod, and the first process in each container will not be assigned PID 1. - HostPID and ShareProcessNamespace cannot both be set. - Optional: Default to false. - type: boolean - subdomain: - description: |- - If specified, the fully qualified Pod hostname will be "...svc.". - If not specified, the pod will not have a domainname at all. - type: string - terminationGracePeriodSeconds: - description: |- - Optional duration in seconds the pod needs to terminate gracefully. May be decreased in delete request. - Value must be non-negative integer. The value zero indicates stop immediately via - the kill signal (no opportunity to shut down). - If this value is nil, the default grace period will be used instead. - The grace period is the duration in seconds after the processes running in the pod are sent - a termination signal and the time when the processes are forcibly halted with a kill signal. - Set this value longer than the expected cleanup time for your process. - Defaults to 30 seconds. - format: int64 - type: integer - tolerations: - description: If specified, the pod's tolerations. - items: - description: |- - The pod this Toleration is attached to tolerates any taint that matches - the triple using the matching operator . - properties: - effect: - description: |- - Effect indicates the taint effect to match. Empty means match all taint effects. - When specified, allowed values are NoSchedule, PreferNoSchedule and NoExecute. - type: string - key: - description: |- - Key is the taint key that the toleration applies to. Empty means match all taint keys. - If the key is empty, operator must be Exists; this combination means to match all values and all keys. - type: string - operator: - description: |- - Operator represents a key's relationship to the value. - Valid operators are Exists and Equal. Defaults to Equal. - Exists is equivalent to wildcard for value, so that a pod can - tolerate all taints of a particular category. - type: string - tolerationSeconds: - description: |- - TolerationSeconds represents the period of time the toleration (which must be - of effect NoExecute, otherwise this field is ignored) tolerates the taint. By default, - it is not set, which means tolerate the taint forever (do not evict). Zero and - negative values will be treated as 0 (evict immediately) by the system. - format: int64 - type: integer - value: - description: |- - Value is the taint value the toleration matches to. - If the operator is Exists, the value should be empty, otherwise just a regular string. - type: string - type: object - type: array - topologySpreadConstraints: - description: |- - TopologySpreadConstraints describes how a group of pods ought to spread across topology - domains. Scheduler will schedule pods in a way which abides by the constraints. - All topologySpreadConstraints are ANDed. - items: - description: - TopologySpreadConstraint specifies how - to spread matching pods among the given topology. - properties: - labelSelector: - description: |- - LabelSelector is used to find matching pods. - Pods that match this label selector are counted to determine the number of pods - in their corresponding topology domain. - properties: - matchExpressions: - description: - matchExpressions is a list of label - selector requirements. The requirements are - ANDed. - items: + secretRef: + description: |- + secretRef is Optional: SecretRef is reference to the authentication secret for User, default is empty. + More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it + properties: + name: description: |- - A label selector requirement is a selector that contains values, a key, and an operator that - relates the key and values. - properties: - key: - description: - key is the label key that - the selector applies to. - type: string - operator: - description: |- - operator represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists and DoesNotExist. - type: string - values: - description: |- - values is an array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. This array is replaced during a strategic - merge patch. - items: - type: string - type: array - required: - - key - - operator - type: object - type: array - matchLabels: - additionalProperties: + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? type: string - description: |- - matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels - map is equivalent to an element of matchExpressions, whose key field is "key", the - operator is "In", and the values array contains only "value". The requirements are ANDed. - type: object - type: object - x-kubernetes-map-type: atomic - matchLabelKeys: - description: |- - MatchLabelKeys is a set of pod label keys to select the pods over which - spreading will be calculated. The keys are used to lookup values from the - incoming pod labels, those key-value labels are ANDed with labelSelector - to select the group of existing pods over which spreading will be calculated - for the incoming pod. The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. - MatchLabelKeys cannot be set when LabelSelector isn't set. - Keys that don't exist in the incoming pod labels will - be ignored. A null or empty list means only match against labelSelector. - - - This is a beta field and requires the MatchLabelKeysInPodTopologySpread feature gate to be enabled (enabled by default). - items: + type: object + x-kubernetes-map-type: atomic + user: + description: |- + user is optional: User is the rados user name, default is admin + More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it type: string - type: array - x-kubernetes-list-type: atomic - maxSkew: - description: |- - MaxSkew describes the degree to which pods may be unevenly distributed. - When `whenUnsatisfiable=DoNotSchedule`, it is the maximum permitted difference - between the number of matching pods in the target topology and the global minimum. - The global minimum is the minimum number of matching pods in an eligible domain - or zero if the number of eligible domains is less than MinDomains. - For example, in a 3-zone cluster, MaxSkew is set to 1, and pods with the same - labelSelector spread as 2/2/1: - In this case, the global minimum is 1. - | zone1 | zone2 | zone3 | - | P P | P P | P | - - if MaxSkew is 1, incoming pod can only be scheduled to zone3 to become 2/2/2; - scheduling it onto zone1(zone2) would make the ActualSkew(3-1) on zone1(zone2) - violate MaxSkew(1). - - if MaxSkew is 2, incoming pod can be scheduled onto any zone. - When `whenUnsatisfiable=ScheduleAnyway`, it is used to give higher precedence - to topologies that satisfy it. - It's a required field. Default value is 1 and 0 is not allowed. - format: int32 - type: integer - minDomains: - description: |- - MinDomains indicates a minimum number of eligible domains. - When the number of eligible domains with matching topology keys is less than minDomains, - Pod Topology Spread treats "global minimum" as 0, and then the calculation of Skew is performed. - And when the number of eligible domains with matching topology keys equals or greater than minDomains, - this value has no effect on scheduling. - As a result, when the number of eligible domains is less than minDomains, - scheduler won't schedule more than maxSkew Pods to those domains. - If value is nil, the constraint behaves as if MinDomains is equal to 1. - Valid values are integers greater than 0. - When value is not nil, WhenUnsatisfiable must be DoNotSchedule. - - - For example, in a 3-zone cluster, MaxSkew is set to 2, MinDomains is set to 5 and pods with the same - labelSelector spread as 2/2/2: - | zone1 | zone2 | zone3 | - | P P | P P | P P | - The number of domains is less than 5(MinDomains), so "global minimum" is treated as 0. - In this situation, new pod with the same labelSelector cannot be scheduled, - because computed skew will be 3(3 - 0) if new Pod is scheduled to any of the three zones, - it will violate MaxSkew. - - - This is a beta field and requires the MinDomainsInPodTopologySpread feature gate to be enabled (enabled by default). - format: int32 - type: integer - nodeAffinityPolicy: - description: |- - NodeAffinityPolicy indicates how we will treat Pod's nodeAffinity/nodeSelector - when calculating pod topology spread skew. Options are: - - Honor: only nodes matching nodeAffinity/nodeSelector are included in the calculations. - - Ignore: nodeAffinity/nodeSelector are ignored. All nodes are included in the calculations. - - - If this value is nil, the behavior is equivalent to the Honor policy. - This is a beta-level feature default enabled by the NodeInclusionPolicyInPodTopologySpread feature flag. - type: string - nodeTaintsPolicy: - description: |- - NodeTaintsPolicy indicates how we will treat node taints when calculating - pod topology spread skew. Options are: - - Honor: nodes without taints, along with tainted nodes for which the incoming pod - has a toleration, are included. - - Ignore: node taints are ignored. All nodes are included. - - - If this value is nil, the behavior is equivalent to the Ignore policy. - This is a beta-level feature default enabled by the NodeInclusionPolicyInPodTopologySpread feature flag. - type: string - topologyKey: - description: |- - TopologyKey is the key of node labels. Nodes that have a label with this key - and identical values are considered to be in the same topology. - We consider each as a "bucket", and try to put balanced number - of pods into each bucket. - We define a domain as a particular instance of a topology. - Also, we define an eligible domain as a domain whose nodes meet the requirements of - nodeAffinityPolicy and nodeTaintsPolicy. - e.g. If TopologyKey is "kubernetes.io/hostname", each Node is a domain of that topology. - And, if TopologyKey is "topology.kubernetes.io/zone", each zone is a domain of that topology. - It's a required field. - type: string - whenUnsatisfiable: - description: |- - WhenUnsatisfiable indicates how to deal with a pod if it doesn't satisfy - the spread constraint. - - DoNotSchedule (default) tells the scheduler not to schedule it. - - ScheduleAnyway tells the scheduler to schedule the pod in any location, - but giving higher precedence to topologies that would help reduce the - skew. - A constraint is considered "Unsatisfiable" for an incoming pod - if and only if every possible node assignment for that pod would violate - "MaxSkew" on some topology. - For example, in a 3-zone cluster, MaxSkew is set to 1, and pods with the same - labelSelector spread as 3/1/1: - | zone1 | zone2 | zone3 | - | P P P | P | P | - If WhenUnsatisfiable is set to DoNotSchedule, incoming pod can only be scheduled - to zone2(zone3) to become 3/2/1(3/1/2) as ActualSkew(2-1) on zone2(zone3) satisfies - MaxSkew(1). In other words, the cluster can still be imbalanced, but scheduler - won't make it *more* imbalanced. - It's a required field. - type: string - required: - - maxSkew - - topologyKey - - whenUnsatisfiable - type: object - type: array - x-kubernetes-list-map-keys: - - topologyKey - - whenUnsatisfiable - x-kubernetes-list-type: map - volumes: - description: |- - List of volumes that can be mounted by containers belonging to the pod. - More info: https://kubernetes.io/docs/concepts/storage/volumes - items: - description: - Volume represents a named volume in a pod - that may be accessed by any container in the pod. - properties: - awsElasticBlockStore: - description: |- - awsElasticBlockStore represents an AWS Disk resource that is attached to a - kubelet's host machine and then exposed to the pod. - More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore - properties: - fsType: - description: |- - fsType is the filesystem type of the volume that you want to mount. - Tip: Ensure that the filesystem type is supported by the host operating system. - Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore - TODO: how do we prevent errors in the filesystem from compromising the machine - type: string - partition: - description: |- - partition is the partition in the volume that you want to mount. - If omitted, the default is to mount by volume name. - Examples: For volume /dev/sda1, you specify the partition as "1". - Similarly, the volume partition for /dev/sda is "0" (or you can leave the property empty). - format: int32 - type: integer - readOnly: - description: |- - readOnly value true will force the readOnly setting in VolumeMounts. - More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore - type: boolean - volumeID: - description: |- - volumeID is unique ID of the persistent disk resource in AWS (Amazon EBS volume). - More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstore - type: string - required: - - volumeID - type: object - azureDisk: - description: - azureDisk represents an Azure Data - Disk mount on the host and bind mount to the pod. - properties: - cachingMode: - description: - "cachingMode is the Host Caching - mode: None, Read Only, Read Write." - type: string - diskName: - description: - diskName is the Name of the data - disk in the blob storage - type: string - diskURI: - description: - diskURI is the URI of data disk - in the blob storage - type: string - fsType: - description: |- - fsType is Filesystem type to mount. - Must be a filesystem type supported by the host operating system. - Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - type: string - kind: - description: - "kind expected values are Shared: - multiple blob disks per storage account Dedicated: - single blob disk per storage account Managed: - azure managed data disk (only in managed availability - set). defaults to shared" - type: string - readOnly: - description: |- - readOnly Defaults to false (read/write). ReadOnly here will force - the ReadOnly setting in VolumeMounts. - type: boolean - required: - - diskName - - diskURI - type: object - azureFile: - description: - azureFile represents an Azure File - Service mount on the host and bind mount to the - pod. - properties: - readOnly: - description: |- - readOnly defaults to false (read/write). ReadOnly here will force - the ReadOnly setting in VolumeMounts. - type: boolean - secretName: - description: - secretName is the name of secret - that contains Azure Storage Account Name and - Key - type: string - shareName: - description: shareName is the azure share Name - type: string - required: - - secretName - - shareName - type: object - cephfs: - description: - cephFS represents a Ceph FS mount on - the host that shares a pod's lifetime - properties: - monitors: - description: |- - monitors is Required: Monitors is a collection of Ceph monitors - More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it - items: + required: + - monitors + type: object + cinder: + description: |- + cinder represents a cinder volume attached and mounted on kubelets host machine. + More info: https://examples.k8s.io/mysql-cinder-pd/README.md + properties: + fsType: + description: |- + fsType is the filesystem type to mount. + Must be a filesystem type supported by the host operating system. + Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. + More info: https://examples.k8s.io/mysql-cinder-pd/README.md + type: string + readOnly: + description: |- + readOnly defaults to false (read/write). ReadOnly here will force + the ReadOnly setting in VolumeMounts. + More info: https://examples.k8s.io/mysql-cinder-pd/README.md + type: boolean + secretRef: + description: |- + secretRef is optional: points to a secret object containing parameters used to connect + to OpenStack. + properties: + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? type: string - type: array - path: - description: - "path is Optional: Used as the - mounted root, rather than the full Ceph tree, - default is /" - type: string - readOnly: - description: |- - readOnly is Optional: Defaults to false (read/write). ReadOnly here will force - the ReadOnly setting in VolumeMounts. - More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it - type: boolean - secretFile: - description: |- - secretFile is Optional: SecretFile is the path to key ring for User, default is /etc/ceph/user.secret - More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it - type: string - secretRef: - description: |- - secretRef is Optional: SecretRef is reference to the authentication secret for User, default is empty. - More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it + type: object + x-kubernetes-map-type: atomic + volumeID: + description: |- + volumeID used to identify the volume in cinder. + More info: https://examples.k8s.io/mysql-cinder-pd/README.md + type: string + required: + - volumeID + type: object + configMap: + description: configMap represents a configMap that + should populate this volume + properties: + defaultMode: + description: |- + defaultMode is optional: mode bits used to set permissions on created files by default. + Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. + YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. + Defaults to 0644. + Directories within the path are not affected by this setting. + This might be in conflict with other options that affect the file + mode, like fsGroup, and the result can be other mode bits set. + format: int32 + type: integer + items: + description: |- + items if unspecified, each key-value pair in the Data field of the referenced + ConfigMap will be projected into the volume as a file whose name is the + key and content is the value. If specified, the listed keys will be + projected into the specified paths, and unlisted keys will not be + present. If a key is specified which is not present in the ConfigMap, + the volume setup will error unless it is marked optional. Paths must be + relative and may not contain the '..' path or start with '..'. + items: + description: Maps a string key to a path within + a volume. properties: - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? + key: + description: key is the key to project. type: string - type: object - x-kubernetes-map-type: atomic - user: - description: |- - user is optional: User is the rados user name, default is admin - More info: https://examples.k8s.io/volumes/cephfs/README.md#how-to-use-it - type: string - required: - - monitors - type: object - cinder: - description: |- - cinder represents a cinder volume attached and mounted on kubelets host machine. - More info: https://examples.k8s.io/mysql-cinder-pd/README.md - properties: - fsType: - description: |- - fsType is the filesystem type to mount. - Must be a filesystem type supported by the host operating system. - Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - More info: https://examples.k8s.io/mysql-cinder-pd/README.md - type: string - readOnly: - description: |- - readOnly defaults to false (read/write). ReadOnly here will force - the ReadOnly setting in VolumeMounts. - More info: https://examples.k8s.io/mysql-cinder-pd/README.md - type: boolean - secretRef: - description: |- - secretRef is optional: points to a secret object containing parameters used to connect - to OpenStack. - properties: - name: + mode: description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? + mode is Optional: mode bits used to set permissions on this file. + Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. + YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. + If not specified, the volume defaultMode will be used. + This might be in conflict with other options that affect the file + mode, like fsGroup, and the result can be other mode bits set. + format: int32 + type: integer + path: + description: |- + path is the relative path of the file to map the key to. + May not be an absolute path. + May not contain the path element '..'. + May not start with the string '..'. type: string + required: + - key + - path type: object - x-kubernetes-map-type: atomic - volumeID: - description: |- - volumeID used to identify the volume in cinder. - More info: https://examples.k8s.io/mysql-cinder-pd/README.md - type: string - required: - - volumeID - type: object - configMap: - description: - configMap represents a configMap that - should populate this volume - properties: - defaultMode: - description: |- - defaultMode is optional: mode bits used to set permissions on created files by default. - Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. - YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. - Defaults to 0644. - Directories within the path are not affected by this setting. - This might be in conflict with other options that affect the file - mode, like fsGroup, and the result can be other mode bits set. - format: int32 - type: integer - items: - description: |- - items if unspecified, each key-value pair in the Data field of the referenced - ConfigMap will be projected into the volume as a file whose name is the - key and content is the value. If specified, the listed keys will be - projected into the specified paths, and unlisted keys will not be - present. If a key is specified which is not present in the ConfigMap, - the volume setup will error unless it is marked optional. Paths must be - relative and may not contain the '..' path or start with '..'. - items: - description: - Maps a string key to a path within - a volume. - properties: - key: - description: key is the key to project. - type: string - mode: - description: |- - mode is Optional: mode bits used to set permissions on this file. - Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. - YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. - If not specified, the volume defaultMode will be used. - This might be in conflict with other options that affect the file - mode, like fsGroup, and the result can be other mode bits set. - format: int32 - type: integer - path: - description: |- - path is the relative path of the file to map the key to. - May not be an absolute path. - May not contain the path element '..'. - May not start with the string '..'. - type: string - required: - - key - - path - type: object - type: array - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - optional specify whether the ConfigMap - or its keys must be defined - type: boolean - type: object - x-kubernetes-map-type: atomic - csi: - description: - csi (Container Storage Interface) represents - ephemeral storage that is handled by certain external - CSI drivers (Beta feature). - properties: - driver: - description: |- - driver is the name of the CSI driver that handles this volume. - Consult with your admin for the correct name as registered in the cluster. - type: string - fsType: - description: |- - fsType to mount. Ex. "ext4", "xfs", "ntfs". - If not provided, the empty value is passed to the associated CSI driver - which will determine the default filesystem to apply. + type: array + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + optional: + description: optional specify whether the ConfigMap + or its keys must be defined + type: boolean + type: object + x-kubernetes-map-type: atomic + csi: + description: csi (Container Storage Interface) represents + ephemeral storage that is handled by certain external + CSI drivers (Beta feature). + properties: + driver: + description: |- + driver is the name of the CSI driver that handles this volume. + Consult with your admin for the correct name as registered in the cluster. + type: string + fsType: + description: |- + fsType to mount. Ex. "ext4", "xfs", "ntfs". + If not provided, the empty value is passed to the associated CSI driver + which will determine the default filesystem to apply. + type: string + nodePublishSecretRef: + description: |- + nodePublishSecretRef is a reference to the secret object containing + sensitive information to pass to the CSI driver to complete the CSI + NodePublishVolume and NodeUnpublishVolume calls. + This field is optional, and may be empty if no secret is required. If the + secret object contains more than one secret, all secret references are passed. + properties: + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + type: object + x-kubernetes-map-type: atomic + readOnly: + description: |- + readOnly specifies a read-only configuration for the volume. + Defaults to false (read/write). + type: boolean + volumeAttributes: + additionalProperties: type: string - nodePublishSecretRef: - description: |- - nodePublishSecretRef is a reference to the secret object containing - sensitive information to pass to the CSI driver to complete the CSI - NodePublishVolume and NodeUnpublishVolume calls. - This field is optional, and may be empty if no secret is required. If the - secret object contains more than one secret, all secret references are passed. - properties: - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? + description: |- + volumeAttributes stores driver-specific properties that are passed to the CSI + driver. Consult your driver's documentation for supported values. + type: object + required: + - driver + type: object + downwardAPI: + description: downwardAPI represents downward API + about the pod that should populate this volume + properties: + defaultMode: + description: |- + Optional: mode bits to use on created files by default. Must be a + Optional: mode bits used to set permissions on created files by default. + Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. + YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. + Defaults to 0644. + Directories within the path are not affected by this setting. + This might be in conflict with other options that affect the file + mode, like fsGroup, and the result can be other mode bits set. + format: int32 + type: integer + items: + description: Items is a list of downward API + volume file + items: + description: DownwardAPIVolumeFile represents + information to create the file containing + the pod field + properties: + fieldRef: + description: 'Required: Selects a field + of the pod: only annotations, labels, + name and namespace are supported.' + properties: + apiVersion: + description: Version of the schema + the FieldPath is written in terms + of, defaults to "v1". + type: string + fieldPath: + description: Path of the field to + select in the specified API version. + type: string + required: + - fieldPath + type: object + x-kubernetes-map-type: atomic + mode: + description: |- + Optional: mode bits used to set permissions on this file, must be an octal value + between 0000 and 0777 or a decimal value between 0 and 511. + YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. + If not specified, the volume defaultMode will be used. + This might be in conflict with other options that affect the file + mode, like fsGroup, and the result can be other mode bits set. + format: int32 + type: integer + path: + description: 'Required: Path is the relative + path name of the file to be created. + Must not be absolute or contain the + ''..'' path. Must be utf-8 encoded. + The first item of the relative path + must not start with ''..''' type: string + resourceFieldRef: + description: |- + Selects a resource of the container: only resources limits and requests + (limits.cpu, limits.memory, requests.cpu and requests.memory) are currently supported. + properties: + containerName: + description: 'Container name: required + for volumes, optional for env vars' + type: string + divisor: + anyOf: + - type: integer + - type: string + description: Specifies the output + format of the exposed resources, + defaults to "1" + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + resource: + description: 'Required: resource to + select' + type: string + required: + - resource + type: object + x-kubernetes-map-type: atomic + required: + - path type: object - x-kubernetes-map-type: atomic - readOnly: - description: |- - readOnly specifies a read-only configuration for the volume. - Defaults to false (read/write). - type: boolean - volumeAttributes: - additionalProperties: - type: string - description: |- - volumeAttributes stores driver-specific properties that are passed to the CSI - driver. Consult your driver's documentation for supported values. - type: object - required: - - driver - type: object - downwardAPI: - description: - downwardAPI represents downward API - about the pod that should populate this volume - properties: - defaultMode: - description: |- - Optional: mode bits to use on created files by default. Must be a - Optional: mode bits used to set permissions on created files by default. - Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. - YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. - Defaults to 0644. - Directories within the path are not affected by this setting. - This might be in conflict with other options that affect the file - mode, like fsGroup, and the result can be other mode bits set. - format: int32 - type: integer - items: - description: - Items is a list of downward API - volume file - items: - description: - DownwardAPIVolumeFile represents - information to create the file containing - the pod field - properties: - fieldRef: - description: - "Required: Selects a field - of the pod: only annotations, labels, - name and namespace are supported." - properties: - apiVersion: - description: - Version of the schema - the FieldPath is written in terms - of, defaults to "v1". - type: string - fieldPath: - description: - Path of the field to - select in the specified API version. - type: string - required: - - fieldPath - type: object - x-kubernetes-map-type: atomic - mode: - description: |- - Optional: mode bits used to set permissions on this file, must be an octal value - between 0000 and 0777 or a decimal value between 0 and 511. - YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. - If not specified, the volume defaultMode will be used. - This might be in conflict with other options that affect the file - mode, like fsGroup, and the result can be other mode bits set. - format: int32 - type: integer - path: - description: - "Required: Path is the relative - path name of the file to be created. - Must not be absolute or contain the - '..' path. Must be utf-8 encoded. - The first item of the relative path - must not start with '..'" - type: string - resourceFieldRef: - description: |- - Selects a resource of the container: only resources limits and requests - (limits.cpu, limits.memory, requests.cpu and requests.memory) are currently supported. - properties: - containerName: - description: - "Container name: required - for volumes, optional for env vars" - type: string - divisor: - anyOf: - - type: integer - - type: string - description: - Specifies the output - format of the exposed resources, - defaults to "1" - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ - x-kubernetes-int-or-string: true - resource: - description: - "Required: resource to - select" - type: string - required: - - resource - type: object - x-kubernetes-map-type: atomic - required: - - path - type: object - type: array - type: object - emptyDir: - description: |- - emptyDir represents a temporary directory that shares a pod's lifetime. - More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir - properties: - medium: - description: |- - medium represents what type of storage medium should back this directory. - The default is "" which means to use the node's default medium. - Must be an empty string (default) or Memory. - More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir - type: string - sizeLimit: - anyOf: - - type: integer - - type: string - description: |- - sizeLimit is the total amount of local storage required for this EmptyDir volume. - The size limit is also applicable for memory medium. - The maximum usage on memory medium EmptyDir would be the minimum value between - the SizeLimit specified here and the sum of memory limits of all containers in a pod. - The default is nil which means that the limit is undefined. - More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ - x-kubernetes-int-or-string: true - type: object - ephemeral: - description: |- - ephemeral represents a volume that is handled by a cluster storage driver. - The volume's lifecycle is tied to the pod that defines it - it will be created before the pod starts, - and deleted when the pod is removed. + type: array + type: object + emptyDir: + description: |- + emptyDir represents a temporary directory that shares a pod's lifetime. + More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir + properties: + medium: + description: |- + medium represents what type of storage medium should back this directory. + The default is "" which means to use the node's default medium. + Must be an empty string (default) or Memory. + More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir + type: string + sizeLimit: + anyOf: + - type: integer + - type: string + description: |- + sizeLimit is the total amount of local storage required for this EmptyDir volume. + The size limit is also applicable for memory medium. + The maximum usage on memory medium EmptyDir would be the minimum value between + the SizeLimit specified here and the sum of memory limits of all containers in a pod. + The default is nil which means that the limit is undefined. + More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + type: object + ephemeral: + description: |- + ephemeral represents a volume that is handled by a cluster storage driver. + The volume's lifecycle is tied to the pod that defines it - it will be created before the pod starts, + and deleted when the pod is removed. - Use this if: - a) the volume is only needed while the pod runs, - b) features of normal volumes like restoring from snapshot or capacity - tracking are needed, - c) the storage driver is specified through a storage class, and - d) the storage driver supports dynamic volume provisioning through - a PersistentVolumeClaim (see EphemeralVolumeSource for more - information on the connection between this volume type - and PersistentVolumeClaim). + Use this if: + a) the volume is only needed while the pod runs, + b) features of normal volumes like restoring from snapshot or capacity + tracking are needed, + c) the storage driver is specified through a storage class, and + d) the storage driver supports dynamic volume provisioning through + a PersistentVolumeClaim (see EphemeralVolumeSource for more + information on the connection between this volume type + and PersistentVolumeClaim). - Use PersistentVolumeClaim or one of the vendor-specific - APIs for volumes that persist for longer than the lifecycle - of an individual pod. + Use PersistentVolumeClaim or one of the vendor-specific + APIs for volumes that persist for longer than the lifecycle + of an individual pod. - Use CSI for light-weight local ephemeral volumes if the CSI driver is meant to - be used that way - see the documentation of the driver for - more information. + Use CSI for light-weight local ephemeral volumes if the CSI driver is meant to + be used that way - see the documentation of the driver for + more information. - A pod can use both types of ephemeral volumes and - persistent volumes at the same time. - properties: - volumeClaimTemplate: - description: |- - Will be used to create a stand-alone PVC to provision the volume. - The pod in which this EphemeralVolumeSource is embedded will be the - owner of the PVC, i.e. the PVC will be deleted together with the - pod. The name of the PVC will be `-` where - `` is the name from the `PodSpec.Volumes` array - entry. Pod validation will reject the pod if the concatenated name - is not valid for a PVC (for example, too long). + A pod can use both types of ephemeral volumes and + persistent volumes at the same time. + properties: + volumeClaimTemplate: + description: |- + Will be used to create a stand-alone PVC to provision the volume. + The pod in which this EphemeralVolumeSource is embedded will be the + owner of the PVC, i.e. the PVC will be deleted together with the + pod. The name of the PVC will be `-` where + `` is the name from the `PodSpec.Volumes` array + entry. Pod validation will reject the pod if the concatenated name + is not valid for a PVC (for example, too long). - An existing PVC with that name that is not owned by the pod - will *not* be used for the pod to avoid using an unrelated - volume by mistake. Starting the pod is then blocked until - the unrelated PVC is removed. If such a pre-created PVC is - meant to be used by the pod, the PVC has to updated with an - owner reference to the pod once the pod exists. Normally - this should not be necessary, but it may be useful when - manually reconstructing a broken cluster. + An existing PVC with that name that is not owned by the pod + will *not* be used for the pod to avoid using an unrelated + volume by mistake. Starting the pod is then blocked until + the unrelated PVC is removed. If such a pre-created PVC is + meant to be used by the pod, the PVC has to updated with an + owner reference to the pod once the pod exists. Normally + this should not be necessary, but it may be useful when + manually reconstructing a broken cluster. - This field is read-only and no changes will be made by Kubernetes - to the PVC after it has been created. + This field is read-only and no changes will be made by Kubernetes + to the PVC after it has been created. - Required, must not be nil. - properties: - metadata: - description: |- - May contain labels and annotations that will be copied into the PVC - when creating it. No other fields are allowed and will be rejected during - validation. - properties: - annotations: - additionalProperties: + Required, must not be nil. + properties: + metadata: + description: |- + May contain labels and annotations that will be copied into the PVC + when creating it. No other fields are allowed and will be rejected during + validation. + properties: + annotations: + additionalProperties: + type: string + type: object + finalizers: + items: + type: string + type: array + labels: + additionalProperties: + type: string + type: object + name: + type: string + namespace: + type: string + type: object + spec: + description: |- + The specification for the PersistentVolumeClaim. The entire content is + copied unchanged into the PVC that gets created from this + template. The same fields as in a PersistentVolumeClaim + are also valid here. + properties: + accessModes: + description: |- + accessModes contains the desired access modes the volume should have. + More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1 + items: + type: string + type: array + dataSource: + description: |- + dataSource field can be used to specify either: + * An existing VolumeSnapshot object (snapshot.storage.k8s.io/VolumeSnapshot) + * An existing PVC (PersistentVolumeClaim) + If the provisioner or an external controller can support the specified data source, + it will create a new volume based on the contents of the specified data source. + When the AnyVolumeDataSource feature gate is enabled, dataSource contents will be copied to dataSourceRef, + and dataSourceRef contents will be copied to dataSource when dataSourceRef.namespace is not specified. + If the namespace is specified, then dataSourceRef will not be copied to dataSource. + properties: + apiGroup: + description: |- + APIGroup is the group for the resource being referenced. + If APIGroup is not specified, the specified Kind must be in the core API group. + For any other third-party types, APIGroup is required. type: string - type: object - finalizers: - items: + kind: + description: Kind is the type of + resource being referenced type: string - type: array - labels: - additionalProperties: + name: + description: Name is the name of + resource being referenced type: string - type: object - name: - type: string - namespace: - type: string - type: object - spec: - description: |- - The specification for the PersistentVolumeClaim. The entire content is - copied unchanged into the PVC that gets created from this - template. The same fields as in a PersistentVolumeClaim - are also valid here. - properties: - accessModes: - description: |- - accessModes contains the desired access modes the volume should have. - More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#access-modes-1 - items: + required: + - kind + - name + type: object + x-kubernetes-map-type: atomic + dataSourceRef: + description: |- + dataSourceRef specifies the object from which to populate the volume with data, if a non-empty + volume is desired. This may be any object from a non-empty API group (non + core object) or a PersistentVolumeClaim object. + When this field is specified, volume binding will only succeed if the type of + the specified object matches some installed volume populator or dynamic + provisioner. + This field will replace the functionality of the dataSource field and as such + if both fields are non-empty, they must have the same value. For backwards + compatibility, when namespace isn't specified in dataSourceRef, + both fields (dataSource and dataSourceRef) will be set to the same + value automatically if one of them is empty and the other is non-empty. + When namespace is specified in dataSourceRef, + dataSource isn't set to the same value and must be empty. + There are three important differences between dataSource and dataSourceRef: + * While dataSource only allows two specific types of objects, dataSourceRef + allows any non-core object, as well as PersistentVolumeClaim objects. + * While dataSource ignores disallowed values (dropping them), dataSourceRef + preserves all values, and generates an error if a disallowed value is + specified. + * While dataSource only allows local objects, dataSourceRef allows objects + in any namespaces. + (Beta) Using this field requires the AnyVolumeDataSource feature gate to be enabled. + (Alpha) Using the namespace field of dataSourceRef requires the CrossNamespaceVolumeDataSource feature gate to be enabled. + properties: + apiGroup: + description: |- + APIGroup is the group for the resource being referenced. + If APIGroup is not specified, the specified Kind must be in the core API group. + For any other third-party types, APIGroup is required. type: string - type: array - dataSource: - description: |- - dataSource field can be used to specify either: - * An existing VolumeSnapshot object (snapshot.storage.k8s.io/VolumeSnapshot) - * An existing PVC (PersistentVolumeClaim) - If the provisioner or an external controller can support the specified data source, - it will create a new volume based on the contents of the specified data source. - When the AnyVolumeDataSource feature gate is enabled, dataSource contents will be copied to dataSourceRef, - and dataSourceRef contents will be copied to dataSource when dataSourceRef.namespace is not specified. - If the namespace is specified, then dataSourceRef will not be copied to dataSource. - properties: - apiGroup: - description: |- - APIGroup is the group for the resource being referenced. - If APIGroup is not specified, the specified Kind must be in the core API group. - For any other third-party types, APIGroup is required. - type: string - kind: - description: - Kind is the type of - resource being referenced - type: string - name: - description: - Name is the name of - resource being referenced - type: string - required: - - kind - - name - type: object - x-kubernetes-map-type: atomic - dataSourceRef: - description: |- - dataSourceRef specifies the object from which to populate the volume with data, if a non-empty - volume is desired. This may be any object from a non-empty API group (non - core object) or a PersistentVolumeClaim object. - When this field is specified, volume binding will only succeed if the type of - the specified object matches some installed volume populator or dynamic - provisioner. - This field will replace the functionality of the dataSource field and as such - if both fields are non-empty, they must have the same value. For backwards - compatibility, when namespace isn't specified in dataSourceRef, - both fields (dataSource and dataSourceRef) will be set to the same - value automatically if one of them is empty and the other is non-empty. - When namespace is specified in dataSourceRef, - dataSource isn't set to the same value and must be empty. - There are three important differences between dataSource and dataSourceRef: - * While dataSource only allows two specific types of objects, dataSourceRef - allows any non-core object, as well as PersistentVolumeClaim objects. - * While dataSource ignores disallowed values (dropping them), dataSourceRef - preserves all values, and generates an error if a disallowed value is - specified. - * While dataSource only allows local objects, dataSourceRef allows objects - in any namespaces. - (Beta) Using this field requires the AnyVolumeDataSource feature gate to be enabled. - (Alpha) Using the namespace field of dataSourceRef requires the CrossNamespaceVolumeDataSource feature gate to be enabled. - properties: - apiGroup: - description: |- - APIGroup is the group for the resource being referenced. - If APIGroup is not specified, the specified Kind must be in the core API group. - For any other third-party types, APIGroup is required. - type: string - kind: - description: - Kind is the type of - resource being referenced - type: string - name: - description: - Name is the name of - resource being referenced - type: string - namespace: - description: |- - Namespace is the namespace of resource being referenced - Note that when a namespace is specified, a gateway.networking.k8s.io/ReferenceGrant object is required in the referent namespace to allow that namespace's owner to accept the reference. See the ReferenceGrant documentation for details. - (Alpha) This field requires the CrossNamespaceVolumeDataSource feature gate to be enabled. - type: string - required: - - kind - - name - type: object - resources: - description: |- - resources represents the minimum resources the volume should have. - If RecoverVolumeExpansionFailure feature is enabled users are allowed to specify resource requirements - that are lower than previous value but must still be higher than capacity recorded in the - status field of the claim. - More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources - properties: - limits: - additionalProperties: - anyOf: - - type: integer - - type: string - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ - x-kubernetes-int-or-string: true - description: |- - Limits describes the maximum amount of compute resources allowed. - More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ - type: object - requests: - additionalProperties: - anyOf: - - type: integer - - type: string - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ - x-kubernetes-int-or-string: true - description: |- - Requests describes the minimum amount of compute resources required. - If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, - otherwise to an implementation-defined value. Requests cannot exceed Limits. - More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ - type: object - type: object - selector: - description: - selector is a label query - over volumes to consider for binding. - properties: - matchExpressions: - description: - matchExpressions is - a list of label selector requirements. - The requirements are ANDed. - items: - description: |- - A label selector requirement is a selector that contains values, a key, and an operator that - relates the key and values. - properties: - key: - description: - key is the label - key that the selector applies - to. - type: string - operator: - description: |- - operator represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists and DoesNotExist. - type: string - values: - description: |- - values is an array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. This array is replaced during a strategic - merge patch. - items: - type: string - type: array - required: - - key - - operator - type: object - type: array - matchLabels: - additionalProperties: - type: string + kind: + description: Kind is the type of + resource being referenced + type: string + name: + description: Name is the name of + resource being referenced + type: string + namespace: + description: |- + Namespace is the namespace of resource being referenced + Note that when a namespace is specified, a gateway.networking.k8s.io/ReferenceGrant object is required in the referent namespace to allow that namespace's owner to accept the reference. See the ReferenceGrant documentation for details. + (Alpha) This field requires the CrossNamespaceVolumeDataSource feature gate to be enabled. + type: string + required: + - kind + - name + type: object + resources: + description: |- + resources represents the minimum resources the volume should have. + If RecoverVolumeExpansionFailure feature is enabled users are allowed to specify resource requirements + that are lower than previous value but must still be higher than capacity recorded in the + status field of the claim. + More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#resources + properties: + limits: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Limits describes the maximum amount of compute resources allowed. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + requests: + additionalProperties: + anyOf: + - type: integer + - type: string + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + description: |- + Requests describes the minimum amount of compute resources required. + If Requests is omitted for a container, it defaults to Limits if that is explicitly specified, + otherwise to an implementation-defined value. Requests cannot exceed Limits. + More info: https://kubernetes.io/docs/concepts/configuration/manage-resources-containers/ + type: object + type: object + selector: + description: selector is a label query + over volumes to consider for binding. + properties: + matchExpressions: + description: matchExpressions is + a list of label selector requirements. + The requirements are ANDed. + items: description: |- - matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels - map is equivalent to an element of matchExpressions, whose key field is "key", the - operator is "In", and the values array contains only "value". The requirements are ANDed. - type: object - type: object - x-kubernetes-map-type: atomic - storageClassName: - description: |- - storageClassName is the name of the StorageClass required by the claim. - More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1 - type: string - volumeAttributesClassName: - description: |- - volumeAttributesClassName may be used to set the VolumeAttributesClass used by this claim. - If specified, the CSI driver will create or update the volume with the attributes defined - in the corresponding VolumeAttributesClass. This has a different purpose than storageClassName, - it can be changed after the claim is created. An empty string value means that no VolumeAttributesClass - will be applied to the claim but it's not allowed to reset this field to empty string once it is set. - If unspecified and the PersistentVolumeClaim is unbound, the default VolumeAttributesClass - will be set by the persistentvolume controller if it exists. - If the resource referred to by volumeAttributesClass does not exist, this PersistentVolumeClaim will be - set to a Pending state, as reflected by the modifyVolumeStatus field, until such as a resource - exists. - More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#volumeattributesclass - (Alpha) Using this field requires the VolumeAttributesClass feature gate to be enabled. - type: string - volumeMode: - description: |- - volumeMode defines what type of volume is required by the claim. - Value of Filesystem is implied when not included in claim spec. - type: string - volumeName: - description: - volumeName is the binding - reference to the PersistentVolume - backing this claim. - type: string - type: object - required: - - spec - type: object - type: object - fc: - description: - fc represents a Fibre Channel resource - that is attached to a kubelet's host machine and - then exposed to the pod. - properties: - fsType: - description: |- - fsType is the filesystem type to mount. - Must be a filesystem type supported by the host operating system. - Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - TODO: how do we prevent errors in the filesystem from compromising the machine + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. + properties: + key: + description: key is the label + key that the selector applies + to. + type: string + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. + items: + type: string + type: array + required: + - key + - operator + type: object + type: array + matchLabels: + additionalProperties: + type: string + description: |- + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. + type: object + type: object + x-kubernetes-map-type: atomic + storageClassName: + description: |- + storageClassName is the name of the StorageClass required by the claim. + More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#class-1 + type: string + volumeAttributesClassName: + description: |- + volumeAttributesClassName may be used to set the VolumeAttributesClass used by this claim. + If specified, the CSI driver will create or update the volume with the attributes defined + in the corresponding VolumeAttributesClass. This has a different purpose than storageClassName, + it can be changed after the claim is created. An empty string value means that no VolumeAttributesClass + will be applied to the claim but it's not allowed to reset this field to empty string once it is set. + If unspecified and the PersistentVolumeClaim is unbound, the default VolumeAttributesClass + will be set by the persistentvolume controller if it exists. + If the resource referred to by volumeAttributesClass does not exist, this PersistentVolumeClaim will be + set to a Pending state, as reflected by the modifyVolumeStatus field, until such as a resource + exists. + More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#volumeattributesclass + (Alpha) Using this field requires the VolumeAttributesClass feature gate to be enabled. + type: string + volumeMode: + description: |- + volumeMode defines what type of volume is required by the claim. + Value of Filesystem is implied when not included in claim spec. + type: string + volumeName: + description: volumeName is the binding + reference to the PersistentVolume + backing this claim. + type: string + type: object + required: + - spec + type: object + type: object + fc: + description: fc represents a Fibre Channel resource + that is attached to a kubelet's host machine and + then exposed to the pod. + properties: + fsType: + description: |- + fsType is the filesystem type to mount. + Must be a filesystem type supported by the host operating system. + Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. + TODO: how do we prevent errors in the filesystem from compromising the machine + type: string + lun: + description: 'lun is Optional: FC target lun + number' + format: int32 + type: integer + readOnly: + description: |- + readOnly is Optional: Defaults to false (read/write). ReadOnly here will force + the ReadOnly setting in VolumeMounts. + type: boolean + targetWWNs: + description: 'targetWWNs is Optional: FC target + worldwide names (WWNs)' + items: type: string - lun: - description: - "lun is Optional: FC target lun - number" - format: int32 - type: integer - readOnly: - description: |- - readOnly is Optional: Defaults to false (read/write). ReadOnly here will force - the ReadOnly setting in VolumeMounts. - type: boolean - targetWWNs: - description: - "targetWWNs is Optional: FC target - worldwide names (WWNs)" - items: - type: string - type: array - wwids: - description: |- - wwids Optional: FC volume world wide identifiers (wwids) - Either wwids or combination of targetWWNs and lun must be set, but not both simultaneously. - items: - type: string - type: array - type: object - flexVolume: - description: |- - flexVolume represents a generic volume resource that is - provisioned/attached using an exec based plugin. - properties: - driver: - description: - driver is the name of the driver - to use for this volume. + type: array + wwids: + description: |- + wwids Optional: FC volume world wide identifiers (wwids) + Either wwids or combination of targetWWNs and lun must be set, but not both simultaneously. + items: type: string - fsType: - description: |- - fsType is the filesystem type to mount. - Must be a filesystem type supported by the host operating system. - Ex. "ext4", "xfs", "ntfs". The default filesystem depends on FlexVolume script. + type: array + type: object + flexVolume: + description: |- + flexVolume represents a generic volume resource that is + provisioned/attached using an exec based plugin. + properties: + driver: + description: driver is the name of the driver + to use for this volume. + type: string + fsType: + description: |- + fsType is the filesystem type to mount. + Must be a filesystem type supported by the host operating system. + Ex. "ext4", "xfs", "ntfs". The default filesystem depends on FlexVolume script. + type: string + options: + additionalProperties: type: string - options: - additionalProperties: + description: 'options is Optional: this field + holds extra command options if any.' + type: object + readOnly: + description: |- + readOnly is Optional: defaults to false (read/write). ReadOnly here will force + the ReadOnly setting in VolumeMounts. + type: boolean + secretRef: + description: |- + secretRef is Optional: secretRef is reference to the secret object containing + sensitive information to pass to the plugin scripts. This may be + empty if no secret object is specified. If the secret object + contains more than one secret, all secrets are passed to the plugin + scripts. + properties: + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? type: string - description: - "options is Optional: this field - holds extra command options if any." - type: object - readOnly: - description: |- - readOnly is Optional: defaults to false (read/write). ReadOnly here will force - the ReadOnly setting in VolumeMounts. - type: boolean - secretRef: - description: |- - secretRef is Optional: secretRef is reference to the secret object containing - sensitive information to pass to the plugin scripts. This may be - empty if no secret object is specified. If the secret object - contains more than one secret, all secrets are passed to the plugin - scripts. - properties: - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - type: object - x-kubernetes-map-type: atomic - required: - - driver - type: object - flocker: - description: - flocker represents a Flocker volume - attached to a kubelet's host machine. This depends - on the Flocker control service being running - properties: - datasetName: - description: |- - datasetName is Name of the dataset stored as metadata -> name on the dataset for Flocker - should be considered as deprecated - type: string - datasetUUID: - description: - datasetUUID is the UUID of the - dataset. This is unique identifier of a Flocker - dataset - type: string - type: object - gcePersistentDisk: - description: |- - gcePersistentDisk represents a GCE Disk resource that is attached to a - kubelet's host machine and then exposed to the pod. - More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk - properties: - fsType: - description: |- - fsType is filesystem type of the volume that you want to mount. - Tip: Ensure that the filesystem type is supported by the host operating system. - Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk - TODO: how do we prevent errors in the filesystem from compromising the machine - type: string - partition: - description: |- - partition is the partition in the volume that you want to mount. - If omitted, the default is to mount by volume name. - Examples: For volume /dev/sda1, you specify the partition as "1". - Similarly, the volume partition for /dev/sda is "0" (or you can leave the property empty). - More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk - format: int32 - type: integer - pdName: - description: |- - pdName is unique name of the PD resource in GCE. Used to identify the disk in GCE. - More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk - type: string - readOnly: - description: |- - readOnly here will force the ReadOnly setting in VolumeMounts. - Defaults to false. - More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk - type: boolean - required: - - pdName - type: object - gitRepo: - description: |- - gitRepo represents a git repository at a particular revision. - DEPRECATED: GitRepo is deprecated. To provision a container with a git repo, mount an - EmptyDir into an InitContainer that clones the repo using git, then mount the EmptyDir - into the Pod's container. - properties: - directory: - description: |- - directory is the target directory name. - Must not contain or start with '..'. If '.' is supplied, the volume directory will be the - git repository. Otherwise, if specified, the volume will contain the git repository in - the subdirectory with the given name. - type: string - repository: - description: repository is the URL - type: string - revision: - description: - revision is the commit hash for - the specified revision. - type: string - required: - - repository - type: object - glusterfs: - description: |- - glusterfs represents a Glusterfs mount on the host that shares a pod's lifetime. - More info: https://examples.k8s.io/volumes/glusterfs/README.md - properties: - endpoints: - description: |- - endpoints is the endpoint name that details Glusterfs topology. - More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod - type: string - path: - description: |- - path is the Glusterfs volume path. - More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod - type: string - readOnly: - description: |- - readOnly here will force the Glusterfs volume to be mounted with read-only permissions. - Defaults to false. - More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod - type: boolean - required: - - endpoints - - path - type: object - hostPath: - description: |- - hostPath represents a pre-existing file or directory on the host - machine that is directly exposed to the container. This is generally - used for system agents or other privileged things that are allowed - to see the host machine. Most containers will NOT need this. - More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath - --- - TODO(jonesdl) We need to restrict who can use host directory mounts and who can/can not - mount host directories as read/write. - properties: - path: - description: |- - path of the directory on the host. - If the path is a symlink, it will follow the link to the real path. - More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath - type: string - type: - description: |- - type for HostPath Volume - Defaults to "" - More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath - type: string - required: - - path - type: object - iscsi: - description: |- - iscsi represents an ISCSI Disk resource that is attached to a - kubelet's host machine and then exposed to the pod. - More info: https://examples.k8s.io/volumes/iscsi/README.md - properties: - chapAuthDiscovery: - description: - chapAuthDiscovery defines whether - support iSCSI Discovery CHAP authentication - type: boolean - chapAuthSession: - description: - chapAuthSession defines whether - support iSCSI Session CHAP authentication - type: boolean - fsType: - description: |- - fsType is the filesystem type of the volume that you want to mount. - Tip: Ensure that the filesystem type is supported by the host operating system. - Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - More info: https://kubernetes.io/docs/concepts/storage/volumes#iscsi - TODO: how do we prevent errors in the filesystem from compromising the machine - type: string - initiatorName: - description: |- - initiatorName is the custom iSCSI Initiator Name. - If initiatorName is specified with iscsiInterface simultaneously, new iSCSI interface - : will be created for the connection. - type: string - iqn: - description: - iqn is the target iSCSI Qualified - Name. - type: string - iscsiInterface: - description: |- - iscsiInterface is the interface Name that uses an iSCSI transport. - Defaults to 'default' (tcp). + type: object + x-kubernetes-map-type: atomic + required: + - driver + type: object + flocker: + description: flocker represents a Flocker volume + attached to a kubelet's host machine. This depends + on the Flocker control service being running + properties: + datasetName: + description: |- + datasetName is Name of the dataset stored as metadata -> name on the dataset for Flocker + should be considered as deprecated + type: string + datasetUUID: + description: datasetUUID is the UUID of the + dataset. This is unique identifier of a Flocker + dataset + type: string + type: object + gcePersistentDisk: + description: |- + gcePersistentDisk represents a GCE Disk resource that is attached to a + kubelet's host machine and then exposed to the pod. + More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk + properties: + fsType: + description: |- + fsType is filesystem type of the volume that you want to mount. + Tip: Ensure that the filesystem type is supported by the host operating system. + Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. + More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk + TODO: how do we prevent errors in the filesystem from compromising the machine + type: string + partition: + description: |- + partition is the partition in the volume that you want to mount. + If omitted, the default is to mount by volume name. + Examples: For volume /dev/sda1, you specify the partition as "1". + Similarly, the volume partition for /dev/sda is "0" (or you can leave the property empty). + More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk + format: int32 + type: integer + pdName: + description: |- + pdName is unique name of the PD resource in GCE. Used to identify the disk in GCE. + More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk + type: string + readOnly: + description: |- + readOnly here will force the ReadOnly setting in VolumeMounts. + Defaults to false. + More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk + type: boolean + required: + - pdName + type: object + gitRepo: + description: |- + gitRepo represents a git repository at a particular revision. + DEPRECATED: GitRepo is deprecated. To provision a container with a git repo, mount an + EmptyDir into an InitContainer that clones the repo using git, then mount the EmptyDir + into the Pod's container. + properties: + directory: + description: |- + directory is the target directory name. + Must not contain or start with '..'. If '.' is supplied, the volume directory will be the + git repository. Otherwise, if specified, the volume will contain the git repository in + the subdirectory with the given name. + type: string + repository: + description: repository is the URL + type: string + revision: + description: revision is the commit hash for + the specified revision. + type: string + required: + - repository + type: object + glusterfs: + description: |- + glusterfs represents a Glusterfs mount on the host that shares a pod's lifetime. + More info: https://examples.k8s.io/volumes/glusterfs/README.md + properties: + endpoints: + description: |- + endpoints is the endpoint name that details Glusterfs topology. + More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod + type: string + path: + description: |- + path is the Glusterfs volume path. + More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod + type: string + readOnly: + description: |- + readOnly here will force the Glusterfs volume to be mounted with read-only permissions. + Defaults to false. + More info: https://examples.k8s.io/volumes/glusterfs/README.md#create-a-pod + type: boolean + required: + - endpoints + - path + type: object + hostPath: + description: |- + hostPath represents a pre-existing file or directory on the host + machine that is directly exposed to the container. This is generally + used for system agents or other privileged things that are allowed + to see the host machine. Most containers will NOT need this. + More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath + --- + TODO(jonesdl) We need to restrict who can use host directory mounts and who can/can not + mount host directories as read/write. + properties: + path: + description: |- + path of the directory on the host. + If the path is a symlink, it will follow the link to the real path. + More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath + type: string + type: + description: |- + type for HostPath Volume + Defaults to "" + More info: https://kubernetes.io/docs/concepts/storage/volumes#hostpath + type: string + required: + - path + type: object + iscsi: + description: |- + iscsi represents an ISCSI Disk resource that is attached to a + kubelet's host machine and then exposed to the pod. + More info: https://examples.k8s.io/volumes/iscsi/README.md + properties: + chapAuthDiscovery: + description: chapAuthDiscovery defines whether + support iSCSI Discovery CHAP authentication + type: boolean + chapAuthSession: + description: chapAuthSession defines whether + support iSCSI Session CHAP authentication + type: boolean + fsType: + description: |- + fsType is the filesystem type of the volume that you want to mount. + Tip: Ensure that the filesystem type is supported by the host operating system. + Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. + More info: https://kubernetes.io/docs/concepts/storage/volumes#iscsi + TODO: how do we prevent errors in the filesystem from compromising the machine + type: string + initiatorName: + description: |- + initiatorName is the custom iSCSI Initiator Name. + If initiatorName is specified with iscsiInterface simultaneously, new iSCSI interface + : will be created for the connection. + type: string + iqn: + description: iqn is the target iSCSI Qualified + Name. + type: string + iscsiInterface: + description: |- + iscsiInterface is the interface Name that uses an iSCSI transport. + Defaults to 'default' (tcp). + type: string + lun: + description: lun represents iSCSI Target Lun + number. + format: int32 + type: integer + portals: + description: |- + portals is the iSCSI Target Portal List. The portal is either an IP or ip_addr:port if the port + is other than default (typically TCP ports 860 and 3260). + items: type: string - lun: - description: - lun represents iSCSI Target Lun - number. - format: int32 - type: integer - portals: - description: |- - portals is the iSCSI Target Portal List. The portal is either an IP or ip_addr:port if the port - is other than default (typically TCP ports 860 and 3260). - items: + type: array + readOnly: + description: |- + readOnly here will force the ReadOnly setting in VolumeMounts. + Defaults to false. + type: boolean + secretRef: + description: secretRef is the CHAP Secret for + iSCSI target and initiator authentication + properties: + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? type: string - type: array - readOnly: - description: |- - readOnly here will force the ReadOnly setting in VolumeMounts. - Defaults to false. - type: boolean - secretRef: - description: - secretRef is the CHAP Secret for - iSCSI target and initiator authentication + type: object + x-kubernetes-map-type: atomic + targetPortal: + description: |- + targetPortal is iSCSI Target Portal. The Portal is either an IP or ip_addr:port if the port + is other than default (typically TCP ports 860 and 3260). + type: string + required: + - iqn + - lun + - targetPortal + type: object + name: + description: |- + name of the volume. + Must be a DNS_LABEL and unique within the pod. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + type: string + nfs: + description: |- + nfs represents an NFS mount on the host that shares a pod's lifetime + More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs + properties: + path: + description: |- + path that is exported by the NFS server. + More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs + type: string + readOnly: + description: |- + readOnly here will force the NFS export to be mounted with read-only permissions. + Defaults to false. + More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs + type: boolean + server: + description: |- + server is the hostname or IP address of the NFS server. + More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs + type: string + required: + - path + - server + type: object + persistentVolumeClaim: + description: |- + persistentVolumeClaimVolumeSource represents a reference to a + PersistentVolumeClaim in the same namespace. + More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims + properties: + claimName: + description: |- + claimName is the name of a PersistentVolumeClaim in the same namespace as the pod using this volume. + More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims + type: string + readOnly: + description: |- + readOnly Will force the ReadOnly setting in VolumeMounts. + Default false. + type: boolean + required: + - claimName + type: object + photonPersistentDisk: + description: photonPersistentDisk represents a PhotonController + persistent disk attached and mounted on kubelets + host machine + properties: + fsType: + description: |- + fsType is the filesystem type to mount. + Must be a filesystem type supported by the host operating system. + Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. + type: string + pdID: + description: pdID is the ID that identifies + Photon Controller persistent disk + type: string + required: + - pdID + type: object + portworxVolume: + description: portworxVolume represents a portworx + volume attached and mounted on kubelets host machine + properties: + fsType: + description: |- + fSType represents the filesystem type to mount + Must be a filesystem type supported by the host operating system. + Ex. "ext4", "xfs". Implicitly inferred to be "ext4" if unspecified. + type: string + readOnly: + description: |- + readOnly defaults to false (read/write). ReadOnly here will force + the ReadOnly setting in VolumeMounts. + type: boolean + volumeID: + description: volumeID uniquely identifies a + Portworx volume + type: string + required: + - volumeID + type: object + projected: + description: projected items for all in one resources + secrets, configmaps, and downward API + properties: + defaultMode: + description: |- + defaultMode are the mode bits used to set permissions on created files by default. + Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. + YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. + Directories within the path are not affected by this setting. + This might be in conflict with other options that affect the file + mode, like fsGroup, and the result can be other mode bits set. + format: int32 + type: integer + sources: + description: sources is the list of volume projections + items: + description: Projection that may be projected + along with other supported volume types properties: - name: + clusterTrustBundle: description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - type: object - x-kubernetes-map-type: atomic - targetPortal: - description: |- - targetPortal is iSCSI Target Portal. The Portal is either an IP or ip_addr:port if the port - is other than default (typically TCP ports 860 and 3260). - type: string - required: - - iqn - - lun - - targetPortal - type: object - name: - description: |- - name of the volume. - Must be a DNS_LABEL and unique within the pod. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - type: string - nfs: - description: |- - nfs represents an NFS mount on the host that shares a pod's lifetime - More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs - properties: - path: - description: |- - path that is exported by the NFS server. - More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs - type: string - readOnly: - description: |- - readOnly here will force the NFS export to be mounted with read-only permissions. - Defaults to false. - More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs - type: boolean - server: - description: |- - server is the hostname or IP address of the NFS server. - More info: https://kubernetes.io/docs/concepts/storage/volumes#nfs - type: string - required: - - path - - server - type: object - persistentVolumeClaim: - description: |- - persistentVolumeClaimVolumeSource represents a reference to a - PersistentVolumeClaim in the same namespace. - More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims - properties: - claimName: - description: |- - claimName is the name of a PersistentVolumeClaim in the same namespace as the pod using this volume. - More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#persistentvolumeclaims - type: string - readOnly: - description: |- - readOnly Will force the ReadOnly setting in VolumeMounts. - Default false. - type: boolean - required: - - claimName - type: object - photonPersistentDisk: - description: - photonPersistentDisk represents a PhotonController - persistent disk attached and mounted on kubelets - host machine - properties: - fsType: - description: |- - fsType is the filesystem type to mount. - Must be a filesystem type supported by the host operating system. - Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - type: string - pdID: - description: - pdID is the ID that identifies - Photon Controller persistent disk - type: string - required: - - pdID - type: object - portworxVolume: - description: - portworxVolume represents a portworx - volume attached and mounted on kubelets host machine - properties: - fsType: - description: |- - fSType represents the filesystem type to mount - Must be a filesystem type supported by the host operating system. - Ex. "ext4", "xfs". Implicitly inferred to be "ext4" if unspecified. - type: string - readOnly: - description: |- - readOnly defaults to false (read/write). ReadOnly here will force - the ReadOnly setting in VolumeMounts. - type: boolean - volumeID: - description: - volumeID uniquely identifies a - Portworx volume - type: string - required: - - volumeID - type: object - projected: - description: - projected items for all in one resources - secrets, configmaps, and downward API - properties: - defaultMode: - description: |- - defaultMode are the mode bits used to set permissions on created files by default. - Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. - YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. - Directories within the path are not affected by this setting. - This might be in conflict with other options that affect the file - mode, like fsGroup, and the result can be other mode bits set. - format: int32 - type: integer - sources: - description: sources is the list of volume projections - items: - description: - Projection that may be projected - along with other supported volume types - properties: - clusterTrustBundle: - description: |- - ClusterTrustBundle allows a pod to access the `.spec.trustBundle` field - of ClusterTrustBundle objects in an auto-updating file. + ClusterTrustBundle allows a pod to access the `.spec.trustBundle` field + of ClusterTrustBundle objects in an auto-updating file. - Alpha, gated by the ClusterTrustBundleProjection feature gate. + Alpha, gated by the ClusterTrustBundleProjection feature gate. - ClusterTrustBundle objects can either be selected by name, or by the - combination of signer name and a label selector. + ClusterTrustBundle objects can either be selected by name, or by the + combination of signer name and a label selector. - Kubelet performs aggressive normalization of the PEM contents written - into the pod filesystem. Esoteric PEM features such as inter-block - comments and block headers are stripped. Certificates are deduplicated. - The ordering of certificates within the file is arbitrary, and Kubelet - may change the order over time. - properties: - labelSelector: - description: |- - Select all ClusterTrustBundles that match this label selector. Only has - effect if signerName is set. Mutually-exclusive with name. If unset, - interpreted as "match nothing". If set but empty, interpreted as "match - everything". - properties: - matchExpressions: - description: - matchExpressions - is a list of label selector - requirements. The requirements - are ANDed. - items: - description: |- - A label selector requirement is a selector that contains values, a key, and an operator that - relates the key and values. - properties: - key: - description: - key is the - label key that the selector - applies to. - type: string - operator: - description: |- - operator represents a key's relationship to a set of values. - Valid operators are In, NotIn, Exists and DoesNotExist. - type: string - values: - description: |- - values is an array of string values. If the operator is In or NotIn, - the values array must be non-empty. If the operator is Exists or DoesNotExist, - the values array must be empty. This array is replaced during a strategic - merge patch. - items: - type: string - type: array - required: - - key - - operator - type: object - type: array - matchLabels: - additionalProperties: - type: string + Kubelet performs aggressive normalization of the PEM contents written + into the pod filesystem. Esoteric PEM features such as inter-block + comments and block headers are stripped. Certificates are deduplicated. + The ordering of certificates within the file is arbitrary, and Kubelet + may change the order over time. + properties: + labelSelector: + description: |- + Select all ClusterTrustBundles that match this label selector. Only has + effect if signerName is set. Mutually-exclusive with name. If unset, + interpreted as "match nothing". If set but empty, interpreted as "match + everything". + properties: + matchExpressions: + description: matchExpressions + is a list of label selector + requirements. The requirements + are ANDed. + items: description: |- - matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels - map is equivalent to an element of matchExpressions, whose key field is "key", the - operator is "In", and the values array contains only "value". The requirements are ANDed. - type: object - type: object - x-kubernetes-map-type: atomic - name: - description: |- - Select a single ClusterTrustBundle by object name. Mutually-exclusive - with signerName and labelSelector. - type: string - optional: - description: |- - If true, don't block pod startup if the referenced ClusterTrustBundle(s) - aren't available. If using name, then the named ClusterTrustBundle is - allowed not to exist. If using signerName, then the combination of - signerName and labelSelector is allowed to match zero - ClusterTrustBundles. - type: boolean - path: - description: - Relative path from the - volume root to write the bundle. - type: string - signerName: - description: |- - Select all ClusterTrustBundles that match this signer name. - Mutually-exclusive with name. The contents of all selected - ClusterTrustBundles will be unified and deduplicated. - type: string - required: - - path - type: object - configMap: - description: - configMap information about - the configMap data to project - properties: - items: - description: |- - items if unspecified, each key-value pair in the Data field of the referenced - ConfigMap will be projected into the volume as a file whose name is the - key and content is the value. If specified, the listed keys will be - projected into the specified paths, and unlisted keys will not be - present. If a key is specified which is not present in the ConfigMap, - the volume setup will error unless it is marked optional. Paths must be - relative and may not contain the '..' path or start with '..'. - items: - description: - Maps a string key to - a path within a volume. - properties: - key: - description: - key is the key - to project. - type: string - mode: - description: |- - mode is Optional: mode bits used to set permissions on this file. - Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. - YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. - If not specified, the volume defaultMode will be used. - This might be in conflict with other options that affect the file - mode, like fsGroup, and the result can be other mode bits set. - format: int32 - type: integer - path: - description: |- - path is the relative path of the file to map the key to. - May not be an absolute path. - May not contain the path element '..'. - May not start with the string '..'. - type: string - required: + A label selector requirement is a selector that contains values, a key, and an operator that + relates the key and values. + properties: + key: + description: key is the + label key that the selector + applies to. + type: string + operator: + description: |- + operator represents a key's relationship to a set of values. + Valid operators are In, NotIn, Exists and DoesNotExist. + type: string + values: + description: |- + values is an array of string values. If the operator is In or NotIn, + the values array must be non-empty. If the operator is Exists or DoesNotExist, + the values array must be empty. This array is replaced during a strategic + merge patch. + items: + type: string + type: array + required: - key - - path + - operator + type: object + type: array + matchLabels: + additionalProperties: + type: string + description: |- + matchLabels is a map of {key,value} pairs. A single {key,value} in the matchLabels + map is equivalent to an element of matchExpressions, whose key field is "key", the + operator is "In", and the values array contains only "value". The requirements are ANDed. type: object - type: array - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - optional specify whether - the ConfigMap or its keys must be - defined - type: boolean - type: object - x-kubernetes-map-type: atomic - downwardAPI: - description: - downwardAPI information about - the downwardAPI data to project - properties: + type: object + x-kubernetes-map-type: atomic + name: + description: |- + Select a single ClusterTrustBundle by object name. Mutually-exclusive + with signerName and labelSelector. + type: string + optional: + description: |- + If true, don't block pod startup if the referenced ClusterTrustBundle(s) + aren't available. If using name, then the named ClusterTrustBundle is + allowed not to exist. If using signerName, then the combination of + signerName and labelSelector is allowed to match zero + ClusterTrustBundles. + type: boolean + path: + description: Relative path from the + volume root to write the bundle. + type: string + signerName: + description: |- + Select all ClusterTrustBundles that match this signer name. + Mutually-exclusive with name. The contents of all selected + ClusterTrustBundles will be unified and deduplicated. + type: string + required: + - path + type: object + configMap: + description: configMap information about + the configMap data to project + properties: + items: + description: |- + items if unspecified, each key-value pair in the Data field of the referenced + ConfigMap will be projected into the volume as a file whose name is the + key and content is the value. If specified, the listed keys will be + projected into the specified paths, and unlisted keys will not be + present. If a key is specified which is not present in the ConfigMap, + the volume setup will error unless it is marked optional. Paths must be + relative and may not contain the '..' path or start with '..'. items: - description: - Items is a list of DownwardAPIVolume - file - items: - description: - DownwardAPIVolumeFile - represents information to create - the file containing the pod field - properties: - fieldRef: - description: - "Required: Selects - a field of the pod: only annotations, - labels, name and namespace - are supported." - properties: - apiVersion: - description: - Version of - the schema the FieldPath - is written in terms of, - defaults to "v1". - type: string - fieldPath: - description: - Path of the - field to select in the - specified API version. - type: string - required: - - fieldPath - type: object - x-kubernetes-map-type: atomic - mode: - description: |- - Optional: mode bits used to set permissions on this file, must be an octal value - between 0000 and 0777 or a decimal value between 0 and 511. - YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. - If not specified, the volume defaultMode will be used. - This might be in conflict with other options that affect the file - mode, like fsGroup, and the result can be other mode bits set. - format: int32 - type: integer - path: - description: - "Required: Path - is the relative path name - of the file to be created. - Must not be absolute or contain - the '..' path. Must be utf-8 - encoded. The first item of - the relative path must not - start with '..'" - type: string - resourceFieldRef: - description: |- - Selects a resource of the container: only resources limits and requests - (limits.cpu, limits.memory, requests.cpu and requests.memory) are currently supported. - properties: - containerName: - description: - "Container - name: required for volumes, - optional for env vars" - type: string - divisor: - anyOf: - - type: integer - - type: string - description: - Specifies the - output format of the exposed - resources, defaults to - "1" - pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ - x-kubernetes-int-or-string: true - resource: - description: - "Required: - resource to select" - type: string - required: - - resource - type: object - x-kubernetes-map-type: atomic - required: - - path - type: object - type: array - type: object - secret: - description: - secret information about - the secret data to project - properties: + description: Maps a string key to + a path within a volume. + properties: + key: + description: key is the key + to project. + type: string + mode: + description: |- + mode is Optional: mode bits used to set permissions on this file. + Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. + YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. + If not specified, the volume defaultMode will be used. + This might be in conflict with other options that affect the file + mode, like fsGroup, and the result can be other mode bits set. + format: int32 + type: integer + path: + description: |- + path is the relative path of the file to map the key to. + May not be an absolute path. + May not contain the path element '..'. + May not start with the string '..'. + type: string + required: + - key + - path + type: object + type: array + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + optional: + description: optional specify whether + the ConfigMap or its keys must be + defined + type: boolean + type: object + x-kubernetes-map-type: atomic + downwardAPI: + description: downwardAPI information about + the downwardAPI data to project + properties: + items: + description: Items is a list of DownwardAPIVolume + file items: - description: |- - items if unspecified, each key-value pair in the Data field of the referenced - Secret will be projected into the volume as a file whose name is the - key and content is the value. If specified, the listed keys will be - projected into the specified paths, and unlisted keys will not be - present. If a key is specified which is not present in the Secret, - the volume setup will error unless it is marked optional. Paths must be - relative and may not contain the '..' path or start with '..'. - items: - description: - Maps a string key to - a path within a volume. - properties: - key: - description: - key is the key - to project. - type: string - mode: - description: |- - mode is Optional: mode bits used to set permissions on this file. - Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. - YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. - If not specified, the volume defaultMode will be used. - This might be in conflict with other options that affect the file - mode, like fsGroup, and the result can be other mode bits set. - format: int32 - type: integer - path: - description: |- - path is the relative path of the file to map the key to. - May not be an absolute path. - May not contain the path element '..'. - May not start with the string '..'. - type: string - required: - - key - - path - type: object - type: array - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - optional: - description: - optional field specify - whether the Secret or its key must - be defined - type: boolean - type: object - x-kubernetes-map-type: atomic - serviceAccountToken: - description: - serviceAccountToken is information - about the serviceAccountToken data to - project - properties: - audience: - description: |- - audience is the intended audience of the token. A recipient of a token - must identify itself with an identifier specified in the audience of the - token, and otherwise should reject the token. The audience defaults to the - identifier of the apiserver. - type: string - expirationSeconds: - description: |- - expirationSeconds is the requested duration of validity of the service - account token. As the token approaches expiration, the kubelet volume - plugin will proactively rotate the service account token. The kubelet will - start trying to rotate the token if the token is older than 80 percent of - its time to live or if the token is older than 24 hours.Defaults to 1 hour - and must be at least 10 minutes. - format: int64 - type: integer - path: - description: |- - path is the path relative to the mount point of the file to project the - token into. - type: string - required: - - path - type: object - type: object - type: array - type: object - quobyte: - description: - quobyte represents a Quobyte mount - on the host that shares a pod's lifetime - properties: - group: - description: |- - group to map volume access to - Default is no group - type: string - readOnly: - description: |- - readOnly here will force the Quobyte volume to be mounted with read-only permissions. - Defaults to false. - type: boolean - registry: - description: |- - registry represents a single or multiple Quobyte Registry services - specified as a string as host:port pair (multiple entries are separated with commas) - which acts as the central registry for volumes - type: string - tenant: - description: |- - tenant owning the given Quobyte volume in the Backend - Used with dynamically provisioned Quobyte volumes, value is set by the plugin - type: string - user: - description: |- - user to map volume access to - Defaults to serivceaccount user - type: string - volume: - description: - volume is a string that references - an already created Quobyte volume by name. - type: string - required: - - registry - - volume - type: object - rbd: - description: |- - rbd represents a Rados Block Device mount on the host that shares a pod's lifetime. - More info: https://examples.k8s.io/volumes/rbd/README.md - properties: - fsType: - description: |- - fsType is the filesystem type of the volume that you want to mount. - Tip: Ensure that the filesystem type is supported by the host operating system. - Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - More info: https://kubernetes.io/docs/concepts/storage/volumes#rbd - TODO: how do we prevent errors in the filesystem from compromising the machine - type: string - image: - description: |- - image is the rados image name. - More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it - type: string - keyring: - description: |- - keyring is the path to key ring for RBDUser. - Default is /etc/ceph/keyring. - More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it + description: DownwardAPIVolumeFile + represents information to create + the file containing the pod field + properties: + fieldRef: + description: 'Required: Selects + a field of the pod: only annotations, + labels, name and namespace + are supported.' + properties: + apiVersion: + description: Version of + the schema the FieldPath + is written in terms of, + defaults to "v1". + type: string + fieldPath: + description: Path of the + field to select in the + specified API version. + type: string + required: + - fieldPath + type: object + x-kubernetes-map-type: atomic + mode: + description: |- + Optional: mode bits used to set permissions on this file, must be an octal value + between 0000 and 0777 or a decimal value between 0 and 511. + YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. + If not specified, the volume defaultMode will be used. + This might be in conflict with other options that affect the file + mode, like fsGroup, and the result can be other mode bits set. + format: int32 + type: integer + path: + description: 'Required: Path + is the relative path name + of the file to be created. + Must not be absolute or contain + the ''..'' path. Must be utf-8 + encoded. The first item of + the relative path must not + start with ''..''' + type: string + resourceFieldRef: + description: |- + Selects a resource of the container: only resources limits and requests + (limits.cpu, limits.memory, requests.cpu and requests.memory) are currently supported. + properties: + containerName: + description: 'Container + name: required for volumes, + optional for env vars' + type: string + divisor: + anyOf: + - type: integer + - type: string + description: Specifies the + output format of the exposed + resources, defaults to + "1" + pattern: ^(\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))(([KMGTPE]i)|[numkMGTPE]|([eE](\+|-)?(([0-9]+(\.[0-9]*)?)|(\.[0-9]+))))?$ + x-kubernetes-int-or-string: true + resource: + description: 'Required: + resource to select' + type: string + required: + - resource + type: object + x-kubernetes-map-type: atomic + required: + - path + type: object + type: array + type: object + secret: + description: secret information about + the secret data to project + properties: + items: + description: |- + items if unspecified, each key-value pair in the Data field of the referenced + Secret will be projected into the volume as a file whose name is the + key and content is the value. If specified, the listed keys will be + projected into the specified paths, and unlisted keys will not be + present. If a key is specified which is not present in the Secret, + the volume setup will error unless it is marked optional. Paths must be + relative and may not contain the '..' path or start with '..'. + items: + description: Maps a string key to + a path within a volume. + properties: + key: + description: key is the key + to project. + type: string + mode: + description: |- + mode is Optional: mode bits used to set permissions on this file. + Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. + YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. + If not specified, the volume defaultMode will be used. + This might be in conflict with other options that affect the file + mode, like fsGroup, and the result can be other mode bits set. + format: int32 + type: integer + path: + description: |- + path is the relative path of the file to map the key to. + May not be an absolute path. + May not contain the path element '..'. + May not start with the string '..'. + type: string + required: + - key + - path + type: object + type: array + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + optional: + description: optional field specify + whether the Secret or its key must + be defined + type: boolean + type: object + x-kubernetes-map-type: atomic + serviceAccountToken: + description: serviceAccountToken is information + about the serviceAccountToken data to + project + properties: + audience: + description: |- + audience is the intended audience of the token. A recipient of a token + must identify itself with an identifier specified in the audience of the + token, and otherwise should reject the token. The audience defaults to the + identifier of the apiserver. + type: string + expirationSeconds: + description: |- + expirationSeconds is the requested duration of validity of the service + account token. As the token approaches expiration, the kubelet volume + plugin will proactively rotate the service account token. The kubelet will + start trying to rotate the token if the token is older than 80 percent of + its time to live or if the token is older than 24 hours.Defaults to 1 hour + and must be at least 10 minutes. + format: int64 + type: integer + path: + description: |- + path is the path relative to the mount point of the file to project the + token into. + type: string + required: + - path + type: object + type: object + type: array + type: object + quobyte: + description: quobyte represents a Quobyte mount + on the host that shares a pod's lifetime + properties: + group: + description: |- + group to map volume access to + Default is no group + type: string + readOnly: + description: |- + readOnly here will force the Quobyte volume to be mounted with read-only permissions. + Defaults to false. + type: boolean + registry: + description: |- + registry represents a single or multiple Quobyte Registry services + specified as a string as host:port pair (multiple entries are separated with commas) + which acts as the central registry for volumes + type: string + tenant: + description: |- + tenant owning the given Quobyte volume in the Backend + Used with dynamically provisioned Quobyte volumes, value is set by the plugin + type: string + user: + description: |- + user to map volume access to + Defaults to serivceaccount user + type: string + volume: + description: volume is a string that references + an already created Quobyte volume by name. + type: string + required: + - registry + - volume + type: object + rbd: + description: |- + rbd represents a Rados Block Device mount on the host that shares a pod's lifetime. + More info: https://examples.k8s.io/volumes/rbd/README.md + properties: + fsType: + description: |- + fsType is the filesystem type of the volume that you want to mount. + Tip: Ensure that the filesystem type is supported by the host operating system. + Examples: "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. + More info: https://kubernetes.io/docs/concepts/storage/volumes#rbd + TODO: how do we prevent errors in the filesystem from compromising the machine + type: string + image: + description: |- + image is the rados image name. + More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it + type: string + keyring: + description: |- + keyring is the path to key ring for RBDUser. + Default is /etc/ceph/keyring. + More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it + type: string + monitors: + description: |- + monitors is a collection of Ceph monitors. + More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it + items: type: string - monitors: - description: |- - monitors is a collection of Ceph monitors. - More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it - items: + type: array + pool: + description: |- + pool is the rados pool name. + Default is rbd. + More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it + type: string + readOnly: + description: |- + readOnly here will force the ReadOnly setting in VolumeMounts. + Defaults to false. + More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it + type: boolean + secretRef: + description: |- + secretRef is name of the authentication secret for RBDUser. If provided + overrides keyring. + Default is nil. + More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it + properties: + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? type: string - type: array - pool: - description: |- - pool is the rados pool name. - Default is rbd. - More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it - type: string - readOnly: - description: |- - readOnly here will force the ReadOnly setting in VolumeMounts. - Defaults to false. - More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it - type: boolean - secretRef: - description: |- - secretRef is name of the authentication secret for RBDUser. If provided - overrides keyring. - Default is nil. - More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it + type: object + x-kubernetes-map-type: atomic + user: + description: |- + user is the rados user name. + Default is admin. + More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it + type: string + required: + - image + - monitors + type: object + scaleIO: + description: scaleIO represents a ScaleIO persistent + volume attached and mounted on Kubernetes nodes. + properties: + fsType: + description: |- + fsType is the filesystem type to mount. + Must be a filesystem type supported by the host operating system. + Ex. "ext4", "xfs", "ntfs". + Default is "xfs". + type: string + gateway: + description: gateway is the host address of + the ScaleIO API Gateway. + type: string + protectionDomain: + description: protectionDomain is the name of + the ScaleIO Protection Domain for the configured + storage. + type: string + readOnly: + description: |- + readOnly Defaults to false (read/write). ReadOnly here will force + the ReadOnly setting in VolumeMounts. + type: boolean + secretRef: + description: |- + secretRef references to the secret for ScaleIO user and other + sensitive information. If this is not provided, Login operation will fail. + properties: + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + type: object + x-kubernetes-map-type: atomic + sslEnabled: + description: sslEnabled Flag enable/disable + SSL communication with Gateway, default false + type: boolean + storageMode: + description: |- + storageMode indicates whether the storage for a volume should be ThickProvisioned or ThinProvisioned. + Default is ThinProvisioned. + type: string + storagePool: + description: storagePool is the ScaleIO Storage + Pool associated with the protection domain. + type: string + system: + description: system is the name of the storage + system as configured in ScaleIO. + type: string + volumeName: + description: |- + volumeName is the name of a volume already created in the ScaleIO system + that is associated with this volume source. + type: string + required: + - gateway + - secretRef + - system + type: object + secret: + description: |- + secret represents a secret that should populate this volume. + More info: https://kubernetes.io/docs/concepts/storage/volumes#secret + properties: + defaultMode: + description: |- + defaultMode is Optional: mode bits used to set permissions on created files by default. + Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. + YAML accepts both octal and decimal values, JSON requires decimal values + for mode bits. Defaults to 0644. + Directories within the path are not affected by this setting. + This might be in conflict with other options that affect the file + mode, like fsGroup, and the result can be other mode bits set. + format: int32 + type: integer + items: + description: |- + items If unspecified, each key-value pair in the Data field of the referenced + Secret will be projected into the volume as a file whose name is the + key and content is the value. If specified, the listed keys will be + projected into the specified paths, and unlisted keys will not be + present. If a key is specified which is not present in the Secret, + the volume setup will error unless it is marked optional. Paths must be + relative and may not contain the '..' path or start with '..'. + items: + description: Maps a string key to a path within + a volume. properties: - name: - description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? + key: + description: key is the key to project. type: string - type: object - x-kubernetes-map-type: atomic - user: - description: |- - user is the rados user name. - Default is admin. - More info: https://examples.k8s.io/volumes/rbd/README.md#how-to-use-it - type: string - required: - - image - - monitors - type: object - scaleIO: - description: - scaleIO represents a ScaleIO persistent - volume attached and mounted on Kubernetes nodes. - properties: - fsType: - description: |- - fsType is the filesystem type to mount. - Must be a filesystem type supported by the host operating system. - Ex. "ext4", "xfs", "ntfs". - Default is "xfs". - type: string - gateway: - description: - gateway is the host address of - the ScaleIO API Gateway. - type: string - protectionDomain: - description: - protectionDomain is the name of - the ScaleIO Protection Domain for the configured - storage. - type: string - readOnly: - description: |- - readOnly Defaults to false (read/write). ReadOnly here will force - the ReadOnly setting in VolumeMounts. - type: boolean - secretRef: - description: |- - secretRef references to the secret for ScaleIO user and other - sensitive information. If this is not provided, Login operation will fail. - properties: - name: + mode: description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? - type: string - type: object - x-kubernetes-map-type: atomic - sslEnabled: - description: - sslEnabled Flag enable/disable - SSL communication with Gateway, default false - type: boolean - storageMode: - description: |- - storageMode indicates whether the storage for a volume should be ThickProvisioned or ThinProvisioned. - Default is ThinProvisioned. - type: string - storagePool: - description: - storagePool is the ScaleIO Storage - Pool associated with the protection domain. - type: string - system: - description: - system is the name of the storage - system as configured in ScaleIO. - type: string - volumeName: - description: |- - volumeName is the name of a volume already created in the ScaleIO system - that is associated with this volume source. - type: string - required: - - gateway - - secretRef - - system - type: object - secret: - description: |- - secret represents a secret that should populate this volume. - More info: https://kubernetes.io/docs/concepts/storage/volumes#secret - properties: - defaultMode: - description: |- - defaultMode is Optional: mode bits used to set permissions on created files by default. - Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. - YAML accepts both octal and decimal values, JSON requires decimal values - for mode bits. Defaults to 0644. - Directories within the path are not affected by this setting. - This might be in conflict with other options that affect the file - mode, like fsGroup, and the result can be other mode bits set. - format: int32 - type: integer - items: - description: |- - items If unspecified, each key-value pair in the Data field of the referenced - Secret will be projected into the volume as a file whose name is the - key and content is the value. If specified, the listed keys will be - projected into the specified paths, and unlisted keys will not be - present. If a key is specified which is not present in the Secret, - the volume setup will error unless it is marked optional. Paths must be - relative and may not contain the '..' path or start with '..'. - items: - description: - Maps a string key to a path within - a volume. - properties: - key: - description: key is the key to project. - type: string - mode: - description: |- - mode is Optional: mode bits used to set permissions on this file. - Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. - YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. - If not specified, the volume defaultMode will be used. - This might be in conflict with other options that affect the file - mode, like fsGroup, and the result can be other mode bits set. - format: int32 - type: integer - path: - description: |- - path is the relative path of the file to map the key to. - May not be an absolute path. - May not contain the path element '..'. - May not start with the string '..'. - type: string - required: - - key - - path - type: object - type: array - optional: - description: - optional field specify whether - the Secret or its keys must be defined - type: boolean - secretName: - description: |- - secretName is the name of the secret in the pod's namespace to use. - More info: https://kubernetes.io/docs/concepts/storage/volumes#secret - type: string - type: object - storageos: - description: - storageOS represents a StorageOS volume - attached and mounted on Kubernetes nodes. - properties: - fsType: - description: |- - fsType is the filesystem type to mount. - Must be a filesystem type supported by the host operating system. - Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - type: string - readOnly: - description: |- - readOnly defaults to false (read/write). ReadOnly here will force - the ReadOnly setting in VolumeMounts. - type: boolean - secretRef: - description: |- - secretRef specifies the secret to use for obtaining the StorageOS API - credentials. If not specified, default values will be attempted. - properties: - name: + mode is Optional: mode bits used to set permissions on this file. + Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. + YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. + If not specified, the volume defaultMode will be used. + This might be in conflict with other options that affect the file + mode, like fsGroup, and the result can be other mode bits set. + format: int32 + type: integer + path: description: |- - Name of the referent. - More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names - TODO: Add other useful fields. apiVersion, kind, uid? + path is the relative path of the file to map the key to. + May not be an absolute path. + May not contain the path element '..'. + May not start with the string '..'. type: string + required: + - key + - path type: object - x-kubernetes-map-type: atomic - volumeName: - description: |- - volumeName is the human-readable name of the StorageOS volume. Volume - names are only unique within a namespace. - type: string - volumeNamespace: - description: |- - volumeNamespace specifies the scope of the volume within StorageOS. If no - namespace is specified then the Pod's namespace will be used. This allows the - Kubernetes name scoping to be mirrored within StorageOS for tighter integration. - Set VolumeName to any name to override the default behaviour. - Set to "default" if you are not using namespaces within StorageOS. - Namespaces that do not pre-exist within StorageOS will be created. - type: string - type: object - vsphereVolume: - description: - vsphereVolume represents a vSphere - volume attached and mounted on kubelets host machine - properties: - fsType: - description: |- - fsType is filesystem type to mount. - Must be a filesystem type supported by the host operating system. - Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. - type: string - storagePolicyID: - description: - storagePolicyID is the storage - Policy Based Management (SPBM) profile ID - associated with the StoragePolicyName. - type: string - storagePolicyName: - description: - storagePolicyName is the storage - Policy Based Management (SPBM) profile name. - type: string - volumePath: - description: - volumePath is the path that identifies - vSphere volume vmdk - type: string - required: - - volumePath - type: object - required: - - name - type: object - type: array - required: - - containers - type: object - type: object - required: - - workerTemplate - type: object - replicas: - default: 1 - description: |- - Number of leader-workers groups. A scale subresource is available to enable HPA. The - selector for HPA will be that of the leader pod, and so practically HPA will be looking up the - leader pod metrics. Note that the leader pod could aggregate metrics from - the rest of the group and expose them as a summary custom metric representing the whole - group. - On scale down, the leader pod as well as the workers statefulset will be deleted. - Default to 1. - format: int32 - type: integer - rolloutStrategy: - description: |- - RolloutStrategy defines the strategy that will be applied to update replicas - when a revision is made to the leaderWorkerTemplate. + type: array + optional: + description: optional field specify whether + the Secret or its keys must be defined + type: boolean + secretName: + description: |- + secretName is the name of the secret in the pod's namespace to use. + More info: https://kubernetes.io/docs/concepts/storage/volumes#secret + type: string + type: object + storageos: + description: storageOS represents a StorageOS volume + attached and mounted on Kubernetes nodes. + properties: + fsType: + description: |- + fsType is the filesystem type to mount. + Must be a filesystem type supported by the host operating system. + Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. + type: string + readOnly: + description: |- + readOnly defaults to false (read/write). ReadOnly here will force + the ReadOnly setting in VolumeMounts. + type: boolean + secretRef: + description: |- + secretRef specifies the secret to use for obtaining the StorageOS API + credentials. If not specified, default values will be attempted. + properties: + name: + description: |- + Name of the referent. + More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names/#names + TODO: Add other useful fields. apiVersion, kind, uid? + type: string + type: object + x-kubernetes-map-type: atomic + volumeName: + description: |- + volumeName is the human-readable name of the StorageOS volume. Volume + names are only unique within a namespace. + type: string + volumeNamespace: + description: |- + volumeNamespace specifies the scope of the volume within StorageOS. If no + namespace is specified then the Pod's namespace will be used. This allows the + Kubernetes name scoping to be mirrored within StorageOS for tighter integration. + Set VolumeName to any name to override the default behaviour. + Set to "default" if you are not using namespaces within StorageOS. + Namespaces that do not pre-exist within StorageOS will be created. + type: string + type: object + vsphereVolume: + description: vsphereVolume represents a vSphere + volume attached and mounted on kubelets host machine + properties: + fsType: + description: |- + fsType is filesystem type to mount. + Must be a filesystem type supported by the host operating system. + Ex. "ext4", "xfs", "ntfs". Implicitly inferred to be "ext4" if unspecified. + type: string + storagePolicyID: + description: storagePolicyID is the storage + Policy Based Management (SPBM) profile ID + associated with the StoragePolicyName. + type: string + storagePolicyName: + description: storagePolicyName is the storage + Policy Based Management (SPBM) profile name. + type: string + volumePath: + description: volumePath is the path that identifies + vSphere volume vmdk + type: string + required: + - volumePath + type: object + required: + - name + type: object + type: array + required: + - containers + type: object + type: object + required: + - workerTemplate + type: object + replicas: + default: 1 + description: |- + Number of leader-workers groups. A scale subresource is available to enable HPA. The + selector for HPA will be that of the leader pod, and so practically HPA will be looking up the + leader pod metrics. Note that the leader pod could aggregate metrics from + the rest of the group and expose them as a summary custom metric representing the whole + group. + On scale down, the leader pod as well as the workers statefulset will be deleted. + Default to 1. + format: int32 + type: integer + rolloutStrategy: + description: |- + RolloutStrategy defines the strategy that will be applied to update replicas + when a revision is made to the leaderWorkerTemplate. + properties: + rollingUpdateConfiguration: + description: RollingUpdateConfiguration defines the parameters + to be used when type is RollingUpdateStrategyType. + properties: + maxSurge: + anyOf: + - type: integer + - type: string + default: 0 + description: |- + The maximum number of replicas that can be scheduled above the original number of + replicas. + Value can be an absolute number (ex: 5) or a percentage of total replicas at + the start of the update (ex: 10%). + Absolute number is calculated from percentage by rounding up. + By default, a value of 0 is used. + Example: when this is set to 30%, the new replicas can be scaled up by 30% + immediately when the rolling update starts. Once old replicas have been deleted, + new replicas can be scaled up further, ensuring that total number of replicas running + at any time during the update is at most 130% of original replicas. + When rolling update completes, replicas will fall back to the original replicas. + x-kubernetes-int-or-string: true + maxUnavailable: + anyOf: + - type: integer + - type: string + default: 1 + description: |- + The maximum number of replicas that can be unavailable during the update. + Value can be an absolute number (ex: 5) or a percentage of total replicas at the start of update (ex: 10%). + Absolute number is calculated from percentage by rounding down. + This can not be 0 if MaxSurge is 0. + By default, a fixed value of 1 is used. + Example: when this is set to 30%, the old replicas can be scaled down by 30% + immediately when the rolling update starts. Once new replicas are ready, old replicas + can be scaled down further, followed by scaling up the new replicas, ensuring + that at least 70% of original number of replicas are available at all times + during the update. + x-kubernetes-int-or-string: true + type: object + type: + default: RollingUpdate + description: Type defines the rollout strategy, it can only be + “RollingUpdate” for now. + enum: + - RollingUpdate + type: string + required: + - type + type: object + startupPolicy: + default: LeaderCreated + description: StartupPolicy determines the startup policy for the worker + statefulset. + enum: + - LeaderCreated + - LeaderReady + type: string + required: + - leaderWorkerTemplate + type: object + status: + description: LeaderWorkerSetStatus defines the observed state of LeaderWorkerSet + properties: + conditions: + description: Conditions track the condition of the leaderworkerset. + items: + description: "Condition contains details for one aspect of the current + state of this API Resource.\n---\nThis struct is intended for + direct use as an array at the field path .status.conditions. For + example,\n\n\n\ttype FooStatus struct{\n\t // Represents the + observations of a foo's current state.\n\t // Known .status.conditions.type + are: \"Available\", \"Progressing\", and \"Degraded\"\n\t // + +patchMergeKey=type\n\t // +patchStrategy=merge\n\t // +listType=map\n\t + \ // +listMapKey=type\n\t Conditions []metav1.Condition `json:\"conditions,omitempty\" + patchStrategy:\"merge\" patchMergeKey:\"type\" protobuf:\"bytes,1,rep,name=conditions\"`\n\n\n\t + \ // other fields\n\t}" properties: - rollingUpdateConfiguration: - description: - RollingUpdateConfiguration defines the parameters - to be used when type is RollingUpdateStrategyType. - properties: - maxSurge: - anyOf: - - type: integer - - type: string - default: 0 - description: |- - The maximum number of replicas that can be scheduled above the original number of - replicas. - Value can be an absolute number (ex: 5) or a percentage of total replicas at - the start of the update (ex: 10%). - Absolute number is calculated from percentage by rounding up. - By default, a value of 0 is used. - Example: when this is set to 30%, the new replicas can be scaled up by 30% - immediately when the rolling update starts. Once old replicas have been deleted, - new replicas can be scaled up further, ensuring that total number of replicas running - at any time during the update is at most 130% of original replicas. - When rolling update completes, replicas will fall back to the original replicas. - x-kubernetes-int-or-string: true - maxUnavailable: - anyOf: - - type: integer - - type: string - default: 1 - description: |- - The maximum number of replicas that can be unavailable during the update. - Value can be an absolute number (ex: 5) or a percentage of total replicas at the start of update (ex: 10%). - Absolute number is calculated from percentage by rounding down. - This can not be 0 if MaxSurge is 0. - By default, a fixed value of 1 is used. - Example: when this is set to 30%, the old replicas can be scaled down by 30% - immediately when the rolling update starts. Once new replicas are ready, old replicas - can be scaled down further, followed by scaling up the new replicas, ensuring - that at least 70% of original number of replicas are available at all times - during the update. - x-kubernetes-int-or-string: true - type: object - type: - default: RollingUpdate - description: - Type defines the rollout strategy, it can only be - “RollingUpdate” for now. + lastTransitionTime: + description: |- + lastTransitionTime is the last time the condition transitioned from one status to another. + This should be when the underlying condition changed. If that is not known, then using the time when the API field changed is acceptable. + format: date-time + type: string + message: + description: |- + message is a human readable message indicating details about the transition. + This may be an empty string. + maxLength: 32768 + type: string + observedGeneration: + description: |- + observedGeneration represents the .metadata.generation that the condition was set based upon. + For instance, if .metadata.generation is currently 12, but the .status.conditions[x].observedGeneration is 9, the condition is out of date + with respect to the current state of the instance. + format: int64 + minimum: 0 + type: integer + reason: + description: |- + reason contains a programmatic identifier indicating the reason for the condition's last transition. + Producers of specific condition types may define expected values and meanings for this field, + and whether the values are considered a guaranteed API. + The value should be a CamelCase string. + This field may not be empty. + maxLength: 1024 + minLength: 1 + pattern: ^[A-Za-z]([A-Za-z0-9_,:]*[A-Za-z0-9_])?$ + type: string + status: + description: status of the condition, one of True, False, Unknown. enum: - - RollingUpdate + - "True" + - "False" + - Unknown + type: string + type: + description: |- + type of condition in CamelCase or in foo.example.com/CamelCase. + --- + Many .condition.type values are consistent across resources like Available, but because arbitrary conditions can be + useful (see .node.status.conditions), the ability to deconflict is important. + The regex it matches is (dns1123SubdomainFmt/)?(qualifiedNameFmt) + maxLength: 316 + pattern: ^([a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*/)?(([A-Za-z0-9][-A-Za-z0-9_.]*)?[A-Za-z0-9])$ type: string required: - - type + - lastTransitionTime + - message + - reason + - status + - type type: object - startupPolicy: - default: Default - description: - StartupPolicy defines the startup policy for the leader/worker - statefulset. - enum: - - Default - - WaitForLeaderReady - type: string - required: - - leaderWorkerTemplate - - startupPolicy - type: object - status: - description: LeaderWorkerSetStatus defines the observed state of LeaderWorkerSet - properties: - conditions: - description: Conditions track the condition of the leaderworkerset. - items: - description: - "Condition contains details for one aspect of the current - state of this API Resource.\n---\nThis struct is intended for - direct use as an array at the field path .status.conditions. For - example,\n\n\n\ttype FooStatus struct{\n\t // Represents the - observations of a foo's current state.\n\t // Known .status.conditions.type - are: \"Available\", \"Progressing\", and \"Degraded\"\n\t // - +patchMergeKey=type\n\t // +patchStrategy=merge\n\t // +listType=map\n\t - \ // +listMapKey=type\n\t Conditions []metav1.Condition `json:\"conditions,omitempty\" - patchStrategy:\"merge\" patchMergeKey:\"type\" protobuf:\"bytes,1,rep,name=conditions\"`\n\n\n\t - \ // other fields\n\t}" - properties: - lastTransitionTime: - description: |- - lastTransitionTime is the last time the condition transitioned from one status to another. - This should be when the underlying condition changed. If that is not known, then using the time when the API field changed is acceptable. - format: date-time - type: string - message: - description: |- - message is a human readable message indicating details about the transition. - This may be an empty string. - maxLength: 32768 - type: string - observedGeneration: - description: |- - observedGeneration represents the .metadata.generation that the condition was set based upon. - For instance, if .metadata.generation is currently 12, but the .status.conditions[x].observedGeneration is 9, the condition is out of date - with respect to the current state of the instance. - format: int64 - minimum: 0 - type: integer - reason: - description: |- - reason contains a programmatic identifier indicating the reason for the condition's last transition. - Producers of specific condition types may define expected values and meanings for this field, - and whether the values are considered a guaranteed API. - The value should be a CamelCase string. - This field may not be empty. - maxLength: 1024 - minLength: 1 - pattern: ^[A-Za-z]([A-Za-z0-9_,:]*[A-Za-z0-9_])?$ - type: string - status: - description: status of the condition, one of True, False, Unknown. - enum: - - "True" - - "False" - - Unknown - type: string - type: - description: |- - type of condition in CamelCase or in foo.example.com/CamelCase. - --- - Many .condition.type values are consistent across resources like Available, but because arbitrary conditions can be - useful (see .node.status.conditions), the ability to deconflict is important. - The regex it matches is (dns1123SubdomainFmt/)?(qualifiedNameFmt) - maxLength: 316 - pattern: ^([a-z0-9]([-a-z0-9]*[a-z0-9])?(\.[a-z0-9]([-a-z0-9]*[a-z0-9])?)*/)?(([A-Za-z0-9][-A-Za-z0-9_.]*)?[A-Za-z0-9])$ - type: string - required: - - lastTransitionTime - - message - - reason - - status - - type - type: object - type: array - hpaPodSelector: - description: |- - HPAPodSelector for pods that belong to the LeaderWorkerSet object, this is - needed for HPA to know what pods belong to the LeaderWorkerSet object. Here - we only select the leader pods. - type: string - readyReplicas: - description: - ReadyReplicas track the number of groups that are in - ready state (updated or not). - format: int32 - type: integer - replicas: - description: - Replicas track the total number of groups that have been - created (updated or not, ready or not) - format: int32 - type: integer - updatedReplicas: - description: - UpdatedReplicas track the number of groups that have - been updated (ready or not). - format: int32 - type: integer - type: object - type: object - served: true - storage: true - subresources: - scale: - labelSelectorPath: .status.hpaPodSelector - specReplicasPath: .spec.replicas - statusReplicasPath: .status.replicas - status: {} + type: array + hpaPodSelector: + description: |- + HPAPodSelector for pods that belong to the LeaderWorkerSet object, this is + needed for HPA to know what pods belong to the LeaderWorkerSet object. Here + we only select the leader pods. + type: string + readyReplicas: + description: ReadyReplicas track the number of groups that are in + ready state (updated or not). + format: int32 + type: integer + replicas: + description: Replicas track the total number of groups that have been + created (updated or not, ready or not) + format: int32 + type: integer + updatedReplicas: + description: UpdatedReplicas track the number of groups that have + been updated (ready or not). + format: int32 + type: integer + type: object + type: object + served: true + storage: true + subresources: + scale: + labelSelectorPath: .status.hpaPodSelector + specReplicasPath: .spec.replicas + statusReplicasPath: .status.replicas + status: {} diff --git a/go.mod b/go.mod index 3e662ff5..3d768f95 100644 --- a/go.mod +++ b/go.mod @@ -1,6 +1,6 @@ module sigs.k8s.io/lws -go 1.22 +go 1.22.0 require ( github.com/google/go-cmp v0.6.0 @@ -12,7 +12,8 @@ require ( k8s.io/apimachinery v0.29.5 k8s.io/client-go v0.29.5 k8s.io/code-generator v0.29.5 - k8s.io/klog/v2 v2.110.1 + k8s.io/klog/v2 v2.120.1 + k8s.io/kubernetes v1.29.5 k8s.io/utils v0.0.0-20230726121419-3b25d923346b sigs.k8s.io/controller-runtime v0.17.3 sigs.k8s.io/structured-merge-diff/v4 v4.4.1 @@ -60,6 +61,7 @@ require ( golang.org/x/mod v0.17.0 // indirect golang.org/x/net v0.25.0 // indirect golang.org/x/oauth2 v0.12.0 // indirect + golang.org/x/sync v0.7.0 // indirect golang.org/x/sys v0.20.0 // indirect golang.org/x/term v0.20.0 // indirect golang.org/x/text v0.15.0 // indirect @@ -73,7 +75,8 @@ require ( gopkg.in/yaml.v3 v3.0.1 // indirect k8s.io/component-base v0.29.5 // indirect k8s.io/gengo v0.0.0-20230829151522-9cce18d56c01 // indirect - k8s.io/kube-openapi v0.0.0-20231010175941-2dd684a91f00 // indirect + k8s.io/gengo/v2 v2.0.0-20240228010128-51d4e06bde70 // indirect + k8s.io/kube-openapi v0.0.0-20240228011516-70dd3763d340 // indirect sigs.k8s.io/json v0.0.0-20221116044647-bc3834ca7abd // indirect sigs.k8s.io/yaml v1.4.0 // indirect ) diff --git a/go.sum b/go.sum index 6c772b5b..04a6af53 100644 --- a/go.sum +++ b/go.sum @@ -15,7 +15,6 @@ github.com/evanphx/json-patch/v5 v5.8.0/go.mod h1:VNkHZ/282BpEyt/tObQO8s5CMPmYYq github.com/fsnotify/fsnotify v1.7.0 h1:8JEhPFa5W2WU7YfeZzPNqzMP6Lwt7L2715Ggo0nosvA= github.com/fsnotify/fsnotify v1.7.0/go.mod h1:40Bi/Hjc2AVfZrqy+aj+yEI+/bRxZnMJyTJwOpGvigM= github.com/go-logr/logr v0.2.0/go.mod h1:z6/tIYblkpsD+a4lm/fGIIU9mZ+XfAiaFtq7xTgseGU= -github.com/go-logr/logr v1.3.0/go.mod h1:9T104GzyrTigFIr8wt5mBrctHMim0Nb2HLGrmQ40KvY= github.com/go-logr/logr v1.4.1 h1:pKouT5E8xu9zeFC39JXRDukb6JFQPXM5p5I91188VAQ= github.com/go-logr/logr v1.4.1/go.mod h1:9T104GzyrTigFIr8wt5mBrctHMim0Nb2HLGrmQ40KvY= github.com/go-logr/zapr v1.3.0 h1:XGdV8XW8zdwFiwOA2Dryh1gj2KRQyOOoNmBy4EplIcQ= @@ -200,13 +199,17 @@ k8s.io/component-base v0.29.5 h1:Ptj8AzG+p8c2a839XriHwxakDpZH9uvIgYz+o1agjg8= k8s.io/component-base v0.29.5/go.mod h1:9nBUoPxW/yimISIgAG7sJDrUGJlu7t8HnDafIrOdU8Q= k8s.io/gengo v0.0.0-20230829151522-9cce18d56c01 h1:pWEwq4Asjm4vjW7vcsmijwBhOr1/shsbSYiWXmNGlks= k8s.io/gengo v0.0.0-20230829151522-9cce18d56c01/go.mod h1:FiNAH4ZV3gBg2Kwh89tzAEV2be7d5xI0vBa/VySYy3E= +k8s.io/gengo/v2 v2.0.0-20240228010128-51d4e06bde70 h1:NGrVE502P0s0/1hudf8zjgwki1X/TByhmAoILTarmzo= +k8s.io/gengo/v2 v2.0.0-20240228010128-51d4e06bde70/go.mod h1:VH3AT8AaQOqiGjMF9p0/IM1Dj+82ZwjfxUP1IxaHE+8= k8s.io/klog/v2 v2.2.0/go.mod h1:Od+F08eJP+W3HUb4pSrPpgp9DGU4GzlpG/TmITuYh/Y= -k8s.io/klog/v2 v2.110.1 h1:U/Af64HJf7FcwMcXyKm2RPM22WZzyR7OSpYj5tg3cL0= -k8s.io/klog/v2 v2.110.1/go.mod h1:YGtd1984u+GgbuZ7e08/yBuAfKLSO0+uR1Fhi6ExXjo= +k8s.io/klog/v2 v2.120.1 h1:QXU6cPEOIslTGvZaXvFWiP9VKyeet3sawzTOvdXb4Vw= +k8s.io/klog/v2 v2.120.1/go.mod h1:3Jpz1GvMt720eyJH1ckRHK1EDfpxISzJ7I9OYgaDtPE= k8s.io/kube-aggregator v0.28.1 h1:rvG4llYnQKHjj6YjjoBPEJxfD1uH0DJwkrJTNKGAaCs= k8s.io/kube-aggregator v0.28.1/go.mod h1:JaLizMe+AECSpO2OmrWVsvnG0V3dX1RpW+Wq/QHbu18= -k8s.io/kube-openapi v0.0.0-20231010175941-2dd684a91f00 h1:aVUu9fTY98ivBPKR9Y5w/AuzbMm96cd3YHRTU83I780= -k8s.io/kube-openapi v0.0.0-20231010175941-2dd684a91f00/go.mod h1:AsvuZPBlUDVuCdzJ87iajxtXuR9oktsTctW/R9wwouA= +k8s.io/kube-openapi v0.0.0-20240228011516-70dd3763d340 h1:BZqlfIlq5YbRMFko6/PM7FjZpUb45WallggurYhKGag= +k8s.io/kube-openapi v0.0.0-20240228011516-70dd3763d340/go.mod h1:yD4MZYeKMBwQKVht279WycxKyM84kkAx2DPrTXaeb98= +k8s.io/kubernetes v1.29.5 h1:G+i73mlMcmqRge1STYospiN8X9FYHGeBOer/e2uGJ1k= +k8s.io/kubernetes v1.29.5/go.mod h1:28sDhcb87LX5z3GWAKYmLrhrifxi4W9bEWua4DRTIvk= k8s.io/utils v0.0.0-20230726121419-3b25d923346b h1:sgn3ZU783SCgtaSJjpcVVlRqd6GSnlTLKgpAAttJvpI= k8s.io/utils v0.0.0-20230726121419-3b25d923346b/go.mod h1:OLgZIPagt7ERELqWJFomSt595RzquPNLL48iOWgYOg0= sigs.k8s.io/controller-runtime v0.17.3 h1:65QmN7r3FWgTxDMz9fvGnO1kbf2nu+acg9p2R9oYYYk= diff --git a/pkg/controllers/leaderworkerset_controller.go b/pkg/controllers/leaderworkerset_controller.go index c3ec30b1..c83530b6 100644 --- a/pkg/controllers/leaderworkerset_controller.go +++ b/pkg/controllers/leaderworkerset_controller.go @@ -371,9 +371,6 @@ func (r *LeaderWorkerSetReconciler) updateConditions(ctx context.Context, lws *l return false, err } - if err != nil { - return false, err - } var ready, updated bool if statefulsetutils.StatefulsetReady(sts) && podutils.PodRunningAndReady(leaderPod) { ready = true diff --git a/pkg/controllers/pod_controller.go b/pkg/controllers/pod_controller.go index 72bcc58f..1aae734b 100644 --- a/pkg/controllers/pod_controller.go +++ b/pkg/controllers/pod_controller.go @@ -32,6 +32,7 @@ import ( coreapplyv1 "k8s.io/client-go/applyconfigurations/core/v1" metaapplyv1 "k8s.io/client-go/applyconfigurations/meta/v1" "k8s.io/klog/v2" + k8spodutils "k8s.io/kubernetes/pkg/api/v1/pod" "k8s.io/utils/ptr" ctrl "sigs.k8s.io/controller-runtime" "sigs.k8s.io/controller-runtime/pkg/client" @@ -102,17 +103,9 @@ func (r *PodReconciler) Reconcile(ctx context.Context, req ctrl.Request) (ctrl.R } // logic for handling leader pod - // workerStsReplicas := *leaderWorkerSet.Spec.LeaderWorkerTemplate.Size - 1 - if leaderWorkerSet.Spec.StartupPolicy == leaderworkerset.WaitForLeaderReady { - var leaderSts appsv1.StatefulSet - if err = r.Get(ctx, types.NamespacedName{Name: lwsName, Namespace: pod.Namespace}, &leaderSts); err != nil { - return ctrl.Result{}, err - } - if leaderSts.Status.ReadyReplicas != *leaderSts.Spec.Replicas { - // workerStsReplicas = 0 - // create the workers sts only after the leader is ready - return ctrl.Result{}, nil - } + if leaderWorkerSet.Spec.StartupPolicy == leaderworkerset.LeaderReadyStartupPolicy && !k8spodutils.IsPodReady(&pod) { + log.V(2).Info("defer the creation of the worker statefulset because leader pod is not ready.") + return ctrl.Result{}, nil } statefulSet, err := constructWorkerStatefulSetApplyConfiguration(pod, leaderWorkerSet) diff --git a/pkg/webhooks/leaderworkerset_webhook.go b/pkg/webhooks/leaderworkerset_webhook.go index cce13965..3e171c66 100644 --- a/pkg/webhooks/leaderworkerset_webhook.go +++ b/pkg/webhooks/leaderworkerset_webhook.go @@ -61,10 +61,6 @@ func (r *LeaderWorkerSetWebhook) Default(ctx context.Context, obj runtime.Object lws.Spec.RolloutStrategy.Type = v1.RollingUpdateStrategyType } - if lws.Spec.StartupPolicy == "" { - lws.Spec.StartupPolicy = v1.DefaultStartupPolicy - } - if lws.Spec.RolloutStrategy.Type == v1.RollingUpdateStrategyType && lws.Spec.RolloutStrategy.RollingUpdateConfiguration == nil { lws.Spec.RolloutStrategy.RollingUpdateConfiguration = &v1.RollingUpdateConfiguration{ MaxUnavailable: intstr.FromInt32(1), diff --git a/test/integration/controllers/leaderworkerset_test.go b/test/integration/controllers/leaderworkerset_test.go index 9b1269ea..a00fb6cb 100644 --- a/test/integration/controllers/leaderworkerset_test.go +++ b/test/integration/controllers/leaderworkerset_test.go @@ -23,7 +23,6 @@ import ( "github.com/onsi/gomega" appsv1 "k8s.io/api/apps/v1" autoscalingv1 "k8s.io/api/autoscaling/v1" - v1 "k8s.io/api/autoscaling/v1" corev1 "k8s.io/api/core/v1" metav1 "k8s.io/apimachinery/pkg/apis/meta/v1" "k8s.io/apimachinery/pkg/apis/meta/v1/unstructured" @@ -271,7 +270,7 @@ var _ = ginkgo.Describe("LeaderWorkerSet controller", func() { updates: []*update{ { checkLWSState: func(lws *leaderworkerset.LeaderWorkerSet) { - var scale v1.Scale + var scale autoscalingv1.Scale gomega.Expect(k8sClient.SubResource("scale").Get(ctx, lws, &scale)).To(gomega.Succeed()) gomega.Expect(int32(scale.Spec.Replicas)).To(gomega.Equal(*lws.Spec.Replicas)) gomega.Expect(int32(scale.Status.Replicas)).To(gomega.Equal(lws.Status.Replicas)) @@ -1512,6 +1511,47 @@ var _ = ginkgo.Describe("LeaderWorkerSet controller", func() { }, }, }), + ginkgo.Entry("create a leaderworkerset with spec.startupPolicyy=LeaderReady", &testCase{ + makeLeaderWorkerSet: func(nsName string) *testing.LeaderWorkerSetWrapper { + return testing.BuildLeaderWorkerSet(nsName).Replica(4).StartupPolicy(leaderworkerset.LeaderReadyStartupPolicy) + }, + updates: []*update{ + { + checkLWSState: func(lws *leaderworkerset.LeaderWorkerSet) { + testing.ExpectWorkerStatefulSetsNotCreated(ctx, k8sClient, lws) + }, + }, + { + lwsUpdateFn: func(lws *leaderworkerset.LeaderWorkerSet) { + testing.SetLeaderPodsToReady(ctx, k8sClient, lws, 0, 2) + }, + checkLWSState: func(lws *leaderworkerset.LeaderWorkerSet) { + testing.ExpectSpecifiedWorkerStatefulSetsCreated(ctx, k8sClient, lws, 0, 2) + testing.ExpectSpecifiedWorkerStatefulSetsNotCreated(ctx, k8sClient, lws, 2, 4) + }, + }, + { + lwsUpdateFn: func(lws *leaderworkerset.LeaderWorkerSet) { + testing.SetLeaderPodsToReady(ctx, k8sClient, lws, 2, 4) + }, + checkLWSState: func(lws *leaderworkerset.LeaderWorkerSet) { + testing.ExpectSpecifiedWorkerStatefulSetsCreated(ctx, k8sClient, lws, 2, 4) + }, + }, + }, + }), + ginkgo.Entry("create a leaderworkerset with spec.startupPolicyy=LeaderCreated", &testCase{ + makeLeaderWorkerSet: func(nsName string) *testing.LeaderWorkerSetWrapper { + return testing.BuildLeaderWorkerSet(nsName).Replica(4).StartupPolicy(leaderworkerset.LeaderCreatedStartupPolicy) + }, + updates: []*update{ + { + checkLWSState: func(lws *leaderworkerset.LeaderWorkerSet) { + testing.ExpectSpecifiedWorkerStatefulSetsCreated(ctx, k8sClient, lws, 0, 4) + }, + }, + }, + }), ) // end of DescribeTable }) // end of Describe diff --git a/test/integration/webhooks/leaderworkerset_test.go b/test/integration/webhooks/leaderworkerset_test.go index 07ce6ab7..c4f8565e 100644 --- a/test/integration/webhooks/leaderworkerset_test.go +++ b/test/integration/webhooks/leaderworkerset_test.go @@ -110,18 +110,18 @@ var _ = ginkgo.Describe("leaderworkerset defaulting, creation and update", func( }), ginkgo.Entry("defaulting logic applies when spec.startpolicy is not set", &testDefaultingCase{ makeLeaderWorkerSet: func(ns *corev1.Namespace) *testutils.LeaderWorkerSetWrapper { - return testutils.BuildLeaderWorkerSet(ns.Name).Replica(2).Size(2).StartupPolicy("") + return testutils.BuildLeaderWorkerSet(ns.Name).Replica(2).Size(2) }, getExpectedLWS: func(lws *leaderworkerset.LeaderWorkerSet) *testutils.LeaderWorkerSetWrapper { - return testutils.BuildLeaderWorkerSet(ns.Name).Replica(2).Size(2).StartupPolicy(leaderworkerset.DefaultStartupPolicy) + return testutils.BuildLeaderWorkerSet(ns.Name).Replica(2).Size(2).StartupPolicy(leaderworkerset.LeaderCreatedStartupPolicy) }, }), ginkgo.Entry("defaulting logic applies when spec.startpolicy is set", &testDefaultingCase{ makeLeaderWorkerSet: func(ns *corev1.Namespace) *testutils.LeaderWorkerSetWrapper { - return testutils.BuildLeaderWorkerSet(ns.Name).Replica(2).Size(2).StartupPolicy(leaderworkerset.DefaultStartupPolicy) + return testutils.BuildLeaderWorkerSet(ns.Name).Replica(2).Size(2).StartupPolicy(leaderworkerset.LeaderReadyStartupPolicy) }, getExpectedLWS: func(lws *leaderworkerset.LeaderWorkerSet) *testutils.LeaderWorkerSetWrapper { - return testutils.BuildLeaderWorkerSet(ns.Name).Replica(2).Size(2).StartupPolicy(leaderworkerset.DefaultStartupPolicy) + return testutils.BuildLeaderWorkerSet(ns.Name).Replica(2).Size(2).StartupPolicy(leaderworkerset.LeaderReadyStartupPolicy) }, }), ginkgo.Entry("apply default rollout strategy", &testDefaultingCase{ @@ -213,6 +213,12 @@ var _ = ginkgo.Describe("leaderworkerset defaulting, creation and update", func( }, lwsCreationShouldFail: true, }), + ginkgo.Entry("creation with invalid startpolicy should fail", &testValidationCase{ + makeLeaderWorkerSet: func(ns *corev1.Namespace) *testutils.LeaderWorkerSetWrapper { + return testutils.BuildLeaderWorkerSet(ns.Name).StartupPolicy("invalidValue") + }, + lwsCreationShouldFail: true, + }), ginkgo.Entry("creation with invalid subGroupSize should fail", &testValidationCase{ makeLeaderWorkerSet: func(ns *corev1.Namespace) *testutils.LeaderWorkerSetWrapper { return testutils.BuildLeaderWorkerSet(ns.Name).Size(2).SubGroupSize(-1) @@ -243,6 +249,15 @@ var _ = ginkgo.Describe("leaderworkerset defaulting, creation and update", func( }, updateShouldFail: true, }), + ginkgo.Entry("update with invalid startpolicy should fail", &testValidationCase{ + makeLeaderWorkerSet: func(ns *corev1.Namespace) *testutils.LeaderWorkerSetWrapper { + return testutils.BuildLeaderWorkerSet(ns.Name).StartupPolicy(leaderworkerset.LeaderReadyStartupPolicy) + }, + updateLeaderWorkerSet: func(lws *leaderworkerset.LeaderWorkerSet) { + lws.Spec.StartupPolicy = "invalidValue" + }, + updateShouldFail: true, + }), ginkgo.Entry("number of size can not be updated", &testValidationCase{ makeLeaderWorkerSet: func(ns *corev1.Namespace) *testutils.LeaderWorkerSetWrapper { return testutils.BuildLeaderWorkerSet(ns.Name).Replica(1).Size(1) diff --git a/test/testutils/util.go b/test/testutils/util.go index c0069361..ee2fc0b7 100644 --- a/test/testutils/util.go +++ b/test/testutils/util.go @@ -237,11 +237,10 @@ func SetPodGroupsToReady(ctx context.Context, k8sClient client.Client, lws *lead } } -// SetPodGroupToReady set one podGroup(leaderPod+workerStatefulset) of leaderWorkerSet to ready state, workerPods not included. -func SetPodGroupToReady(ctx context.Context, k8sClient client.Client, statefulsetName string, lws *leaderworkerset.LeaderWorkerSet) { +func SetLeaderPodToReady(ctx context.Context, k8sClient client.Client, podName string, lws *leaderworkerset.LeaderWorkerSet) { gomega.Eventually(func() error { var leaderPod corev1.Pod - if err := k8sClient.Get(ctx, client.ObjectKey{Namespace: lws.Namespace, Name: statefulsetName}, &leaderPod); err != nil { + if err := k8sClient.Get(ctx, client.ObjectKey{Namespace: lws.Namespace, Name: podName}, &leaderPod); err != nil { return err } @@ -256,7 +255,7 @@ func SetPodGroupToReady(ctx context.Context, k8sClient client.Client, statefulse gomega.Eventually(func() error { var leaderPod corev1.Pod - if err := k8sClient.Get(ctx, client.ObjectKey{Namespace: lws.Namespace, Name: statefulsetName}, &leaderPod); err != nil { + if err := k8sClient.Get(ctx, client.ObjectKey{Namespace: lws.Namespace, Name: podName}, &leaderPod); err != nil { return err } @@ -268,7 +267,11 @@ func SetPodGroupToReady(ctx context.Context, k8sClient client.Client, statefulse leaderPod.Status.Conditions = append(leaderPod.Status.Conditions, condition) return k8sClient.Status().Update(ctx, &leaderPod) }, Timeout, Interval).Should(gomega.Succeed()) +} +// SetPodGroupToReady set one podGroup(leaderPod+workerStatefulset) of leaderWorkerSet to ready state, workerPods not included. +func SetPodGroupToReady(ctx context.Context, k8sClient client.Client, statefulsetName string, lws *leaderworkerset.LeaderWorkerSet) { + SetLeaderPodToReady(ctx, k8sClient, statefulsetName, lws) gomega.Eventually(func() error { var sts appsv1.StatefulSet if err := k8sClient.Get(ctx, types.NamespacedName{Name: statefulsetName, Namespace: lws.Namespace}, &sts); err != nil { @@ -492,3 +495,17 @@ func DeleteNamespace(ctx context.Context, c client.Client, ns *corev1.Namespace) } return nil } + +func SetLeaderPodsToReady(ctx context.Context, k8sClient client.Client, lws *leaderworkerset.LeaderWorkerSet, start, end int) { + var leaderSts appsv1.StatefulSet + gomega.Eventually(func() error { + if err := k8sClient.Get(ctx, types.NamespacedName{Name: lws.Name, Namespace: lws.Namespace}, &leaderSts); err != nil { + return err + } + return nil + }, Timeout, Interval).Should(gomega.Succeed()) + + for i := start; i < end; i++ { + SetLeaderPodToReady(ctx, k8sClient, fmt.Sprintf("%s-%d", leaderSts.Name, i), lws) + } +} diff --git a/test/testutils/validators.go b/test/testutils/validators.go index 97887664..f126da9d 100644 --- a/test/testutils/validators.go +++ b/test/testutils/validators.go @@ -27,6 +27,7 @@ import ( appsv1 "k8s.io/api/apps/v1" corev1 "k8s.io/api/core/v1" eventsv1 "k8s.io/api/events/v1" + apierrors "k8s.io/apimachinery/pkg/api/errors" metav1 "k8s.io/apimachinery/pkg/apis/meta/v1" "k8s.io/apimachinery/pkg/types" "sigs.k8s.io/controller-runtime/pkg/client" @@ -373,3 +374,39 @@ func ValidateLatestEvent(ctx context.Context, k8sClient client.Client, eventReas }, Timeout, Interval).Should(gomega.BeNil()) } + +func ExpectWorkerStatefulSetsNotCreated(ctx context.Context, k8sClient client.Client, lws *leaderworkerset.LeaderWorkerSet) { + ginkgo.By("checking no worker statefulset created") + gomega.Consistently(func() bool { + var statefulSetList appsv1.StatefulSetList + if err := k8sClient.List(ctx, &statefulSetList, client.InNamespace(lws.Namespace), &client.MatchingLabels{leaderworkerset.SetNameLabelKey: lws.Name}); err != nil { + return false + } + return len(statefulSetList.Items) == 1 && statefulSetList.Items[0].Name == lws.Name + }, Timeout, Interval).Should(gomega.Equal(true)) +} + +func ExpectSpecifiedWorkerStatefulSetsCreated(ctx context.Context, k8sClient client.Client, lws *leaderworkerset.LeaderWorkerSet, start, end int) { + gomega.Eventually(func() error { + var sts appsv1.StatefulSet + for i := start; i < end; i++ { + if err := k8sClient.Get(ctx, types.NamespacedName{Name: fmt.Sprintf("%s-%d", lws.Name, i), Namespace: lws.Namespace}, &sts); err != nil { + return err + } + } + return nil + }, Timeout, Interval).Should(gomega.BeNil()) +} + +func ExpectSpecifiedWorkerStatefulSetsNotCreated(ctx context.Context, k8sClient client.Client, lws *leaderworkerset.LeaderWorkerSet, start, end int) { + gomega.Consistently(func() bool { + var sts appsv1.StatefulSet + for i := start; i < end; i++ { + if err := k8sClient.Get(ctx, types.NamespacedName{Name: fmt.Sprintf("%s-%d", lws.Name, i), Namespace: lws.Namespace}, &sts); err == nil || + !apierrors.IsNotFound(err) { + return false + } + } + return true + }, Timeout, Interval).Should(gomega.Equal(true)) +} diff --git a/test/testutils/wrappers.go b/test/testutils/wrappers.go index 72fe05c0..43048ff5 100644 --- a/test/testutils/wrappers.go +++ b/test/testutils/wrappers.go @@ -137,7 +137,7 @@ func BuildLeaderWorkerSet(nsName string) *LeaderWorkerSetWrapper { MaxSurge: intstr.FromInt(0), }, } - lws.Spec.StartupPolicy = leaderworkerset.DefaultStartupPolicy + lws.Spec.StartupPolicy = leaderworkerset.LeaderCreatedStartupPolicy return &LeaderWorkerSetWrapper{ lws, } @@ -185,11 +185,11 @@ func MakePodSpecWithInitContainer() corev1.PodSpec { Name: "test", Image: "busybox", Env: []corev1.EnvVar{ - corev1.EnvVar{ + { Name: "key1", Value: "value1", }, - corev1.EnvVar{ + { Name: "key2", Value: "value2", }, @@ -201,11 +201,11 @@ func MakePodSpecWithInitContainer() corev1.PodSpec { Name: "init-test", Image: "busybox", Env: []corev1.EnvVar{ - corev1.EnvVar{ + { Name: "key1", Value: "value1", }, - corev1.EnvVar{ + { Name: "key2", Value: "value2", },