partitions.rb

#
# partitions.rb
#
# This fact provides an alphabetic list of blocks per disk and/or partition,
# partitions per disk and disks.
#
# We support most of generic SATA and PATA disks, plus Hewlett-Packard
# Smart Array naming format ...  This also should work for systems running
# as Virtual Machine guest at least for Xen and KVM ...
#

if Facter.value(:kernel) == 'Linux'
  # We store a list of disks (or block devices if you wish) here ...
  disks = []

  # We store number of blocks per disk and/or partition here ...
  blocks = {}

  # We store a list of partitions on per-disk basis here ...
  partitions = Hash.new { |k,v| k[v] = [] }

  #
  # Support for the following might not be of interest ...
  #
  # MMC is Multi Media Card which can be either SD or microSD, etc ...
  # MTD is Memory Technology Device also known as Flash Memory
  #
  exclude = %w(backdev.* dm-\d loop mmcblk mtdblock ram ramzswap)

  #
  # Modern Linux kernels provide "/proc/partitions" in the following format:
  #
  #  major minor  #blocks  name
  #
  #     8        0  244198584 sda
  #     8        1    3148708 sda1
  #     8        2  123804922 sda2
  #     8        3  116214210 sda3
  #     8        4    1028160 sda4
  #

  # Make regular expression form our patterns ...
  exclude = Regexp.union(*exclude.collect { |i| Regexp.new(i) })

  #
  # We utilise rely on "cat" for reading values from entries under "/proc".
  # This is due to some problems with IO#read in Ruby and reading content of
  # the "proc" file system that was reported more than once in the past ...
  #
  Facter::Util::Resolution.exec('cat /proc/partitions 2> /dev/null').each_line do |line|
    # Remove bloat ...
    line.strip!

    # Line of interest should start with a number ...
    next if line.empty? or line.match(/^[a-zA-Z]+/)

    # We have something, so let us apply our device type filter ...
    next if line.match(exclude)

    # Only blocks and partitions matter ...
    block     = line.split(/\s+/)[2]
    partition = line.split(/\s+/)[3]

    if partition.match(/^cciss/)
      #
      # Special case for Hewlett-Packard Smart Array which probably
      # nobody is using any more nowadays anyway ...
      #
      partition = partition.split('/')[1]

      if match = partition.match(/^([a-zA-Z0-9]+)[pP][0-9]+/)
        # Handle the case when "cciss/c0d0p1" is given ...
        disk = match[1]
      elsif partition.match(/^[a-zA-Z0-9]+/)
        # Handle the case when "cciss/c0d0" is given ...
        disk = partition
      end
    else
      # Take care of any partitions create atop of the
      # Linux Software RAID decies like e.g. /dev/md0, etc.
      if match = partition.match(/^(md\d+)/)
        disk = match[1]
      else
        # Everything else ...
        disk = partition.scan(/^[a-zA-Z]+/)
      end
    end

    # Convert back into a string value ...
    disk = Array(disk).first.to_s

    # We have something rather odd that did not parse at all, so ignore ...
    next if disk.empty?

    # All disks ... This might even be sda, sdaa, sdab, sdac, etc ...
    disks << disk

    # Store details about number of blocks per disk and/or partition ...
    blocks[partition] = block

    # A disk is not a partition, therefore we ignore ...
    partitions[disk] << partition unless partition == disk
  end

  Facter.add('disks') do
    confine :kernel => :linux
    setcode { disks.sort.uniq.join(',') }
  end

  blocks.each do |k,v|
    Facter.add("blocks_#{k}") do
      confine :kernel => :linux
      setcode { v }
    end
  end

  partitions.each do |k,v|
    Facter.add("partitions_#{k}") do
      confine :kernel => :linux

      # To ensure proper sorting order by the interface name ...
      v = v.sort_by { |i| i.scan(/\d+/).shift.to_i }

      setcode { v.sort.join(',') }
    end
  end
end

# vim: set ts=2 sw=2 et :
# encoding: utf-8