Skip to content

Latest commit

 

History

History
120 lines (86 loc) · 2.7 KB

INSTALL.https.md

File metadata and controls

120 lines (86 loc) · 2.7 KB

Setup Noosfero to use HTTPS

This document assumes that you have a fully and clean Noosfero installation as explained at the INSTALL.md file.

Creating a self-signed SSL certificate

You should get a valid SSL certificate, but if you want to test your setup before, you could generate a self-signed certificate as below:

# mkdir /etc/noosfero/ssl
# cd /etc/noosfero/ssl
# openssl genrsa 2048 > noosfero.key
# openssl req -new -x509 -sha256 -nodes -days $[10*365] -key noosfero.key > noosfero.cert
# cat noosfero.key noosfero.cert > noosfero.pem

Web server configuration

There are two ways of using SSL with Noosfero: 1) If you are not using Varnish; and 2) If you are using Varnish.

1) If you are are not using Varnish

Simply do a redirect in apache to force all connections with SSL:

<VirtualHost *:8080>
  ServerName test.stoa.usp.br
  Redirect / https://example.com/
</VirtualHost>

And set a vhost to receive then:

<VirtualHost *:443>
  ServerName example.com
  SSLEngine On
  SSLCertificateFile    /etc/ssl/certs/cert.pem
  SSLCertificateKeyFile /etc/ssl/private/cert.key
  Include /etc/noosfero/apache/virtualhost.conf
</VirtualHost>

Be aware that if you had configured varnish, the requests won't reach it with this configuration.

2) If you are using Varnish

Varnish isn't able to communicate with the SSL protocol, so we will need some one else who do this and Pound can do the job. In order to install it in Debian based systems:

$ sudo apt-get install pound

Set Varnish to listen in other port than 80 in /etc/defaults/varnish:

DAEMON_OPTS="-a localhost:6081 \
             -T localhost:6082 \
             -f /etc/varnish/default.vcl \
             -S /etc/varnish/secret \
             -s file,/var/lib/varnish/$INSTANCE/varnish_storage.bin,1G"

Configure Pound:

# cp /usr/share/noosfero/etc/pound.cfg /etc/pound/

Edit /etc/pound.cfg and set the IP and domain of your server.

Configure Pound to start at system initialization. At /etc/default/pound:

startup=1

Set Apache to only listen to localhost, at /etc/apache2/ports.conf:

Listen 127.0.0.1:8080

Restart the services:

$ sudo service apache2 restart
$ sudo service varnish restart

Start pound:

$ sudo service pound start

Noosfero XMPP chat

If you want to use chat over HTTPS, then you should add the domain and IP of your server in the /etc/hosts file, example

/etc/hosts:

192.168.1.86	mydomain.example.com

Also, it's recomended that you remove the lines below from the file /etc/apache2/sites-enabled/noosfero:

RewriteEngine On
Include /usr/share/noosfero/util/chat/apache/xmpp.conf