diff --git a/functions/00_generateConf b/functions/00_generateConf
index 769c0fe..3096c2e 100644
--- a/functions/00_generateConf
+++ b/functions/00_generateConf
@@ -11,11 +11,11 @@ function generateConf
     echo '[CONFIGURATION]' > "$CONF"
     echo 'PROFILE="Bare-metal"' >> "$CONF"
     echo 'ENV="prod"' >> "$CONF"
-    echo 'MAIL_ENABLED="no"' >> "$CONF"
+    echo 'MAIL_ENABLED="false"' >> "$CONF"
     echo 'MAIL_RECIPIENT=""' >> "$CONF"
 
     echo -e '\n[SOFTWARE CONFIGURATION]' >> "$CONF"
     echo 'EXCLUDE_MAJOR=""' >> "$CONF"
     echo 'EXCLUDE=""' >> "$CONF"
-    echo 'NEED_RESTART=""' >> "$CONF"
+    echo 'SERVICE_RESTART=""' >> "$CONF"
 }
\ No newline at end of file
diff --git a/functions/00_get-conf b/functions/00_get-conf
index 0d95761..f2a355b 100644
--- a/functions/00_get-conf
+++ b/functions/00_get-conf
@@ -1,32 +1,34 @@
 #!/usr/bin/env bash
-# Récupération de la conf renseignée dans linupdate.conf
+# Retrieve configuration from linupdate.conf
 
 function getConf
 {
-	# Si le fichier de configuration n'existe pas alors on quitte
+    # If config file doesn't exist, exit
     if [ ! -f "$CONF" ];then
         echo -e "[${YELLOW} ERROR ${RESET}] No config file was found on this server. Use --install param to finalize linupdate installation.\n"
         (( UPDATE_ERROR++ ))
-        # On supprime le fichier de log, inutile
+
+        # Delete log file 
         rm "$LOG" -f
         clean_exit
     fi
 
-    PROFILE=$(egrep "^PROFILE=" "$CONF" | cut -d'=' -f 2 | sed 's/"//g') # Type de serveur
-    SERVER_ENV=$(egrep "^ENV=" "$CONF" | cut -d'=' -f 2 | sed 's/"//g')  # Env
-    MAIL_ENABLED=$(egrep "^MAIL_ENABLED=" "$CONF" | cut -d'=' -f 2 | sed 's/"//g')
-    MAIL_RECIPIENT=$(egrep "^MAIL_RECIPIENT=" "$CONF" | cut -d'=' -f 2 | sed 's/"//g')
-    CONF_SOFT_EXCLUDE_MAJOR=$(egrep "^EXCLUDE_MAJOR=" "$CONF" | cut -d'=' -f 2 | sed 's/"//g')  # Paquets critiques à exclure en cas de maj majeure
-    CONF_SOFT_EXCLUDE=$(egrep "^EXCLUDE=" "$CONF" | cut -d'=' -f 2 | sed 's/"//g')              # Paquets critiques à exclure dans tous les cas
-    CONF_SOFT_NEED_RESTART=$(egrep "^NEED_RESTART=" "$CONF" | cut -d'=' -f 2 | sed 's/"//g')    # Paquets critiques ou non à redémarrer
+    PROFILE=$(egrep "^PROFILE=" "$CONF" | cut -d'=' -f 2 | sed 's/"//g')                        # Profile name
+    ENV=$(egrep "^ENV=" "$CONF" | cut -d'=' -f 2 | sed 's/"//g')                                # Environment
+    MAIL_ENABLED=$(egrep "^MAIL_ENABLED=" "$CONF" | cut -d'=' -f 2 | sed 's/"//g')              # Enable mail notification
+    MAIL_RECIPIENT=$(egrep "^MAIL_RECIPIENT=" "$CONF" | cut -d'=' -f 2 | sed 's/"//g')          # Mail recipient
+    PACKAGES_EXCLUDE_MAJOR=$(egrep "^EXCLUDE_MAJOR=" "$CONF" | cut -d'=' -f 2 | sed 's/"//g')   # Packages to exclude on a major update
+    PACKAGES_EXCLUDE=$(egrep "^EXCLUDE=" "$CONF" | cut -d'=' -f 2 | sed 's/"//g')               # Packages to always exclude
+    SERVICE_RESTART=$(egrep "^SERVICE_RESTART=" "$CONF" | cut -d'=' -f 2 | sed 's/"//g')        # Services to restart after update
 
     if [ -z "$PROFILE" ];then
         echo -e "[${RED} ERROR ${RESET}] No profile is defined\n"
         (( UPDATE_ERROR++ ))
         clean_exit
     fi
-    if [ -z "$SERVER_ENV" ];then
-        echo -e "[${RED} ERROR ${RESET}] No env is defined\n"
+
+    if [ -z "$ENV" ];then
+        echo -e "[${RED} ERROR ${RESET}] No environment is defined\n"
         (( UPDATE_ERROR++ ))
         clean_exit
     fi
diff --git a/functions/00_space-left b/functions/00_space-left
index 3cef256..da8ffe3 100644
--- a/functions/00_space-left
+++ b/functions/00_space-left
@@ -9,7 +9,7 @@ function spaceLeft
     if [ "$SPACE_LEFT" -lt 1000000 ];then
         echo -ne "${RED}"; df -h | egrep "/$" | awk '{print $4}';    echo -ne "${RESET}"
         (( UPDATE_ERROR++ ))
-        if [ "$MAIL_ENABLED" -eq "yes" ];then 
+        if [ "$MAIL_ENABLED" -eq "true" ];then 
             sendMail
         fi
         clean_exit
diff --git a/functions/02_check-packages-before-update b/functions/02_check-packages-before-update
index 02825bc..17370ae 100644
--- a/functions/02_check-packages-before-update
+++ b/functions/02_check-packages-before-update
@@ -82,17 +82,17 @@ function checkPackagesBeforeUpdate
         #   trouvées quoi qu'il arrive.
 
         # Process packages to exclude on major release update (EXCLUDE_MAJOR):
-        if [ ! -z "$CONF_SOFT_EXCLUDE_MAJOR" ];then
+        if [ ! -z "$PACKAGES_EXCLUDE_MAJOR" ];then
 
-            PACKAGES_EXCLUDE_MAJOR=""
+            PACKAGES_EXCLUDE_MAJOR_ARRAY=""
             IFS=','
 
-            # Inject exclusion list into PACKAGES_EXCLUDE_MAJOR
-            read -ra PACKAGES_EXCLUDE_MAJOR <<< "$CONF_SOFT_EXCLUDE_MAJOR"
+            # Inject exclusion list into PACKAGES_EXCLUDE_MAJOR_ARRAY
+            read -ra PACKAGES_EXCLUDE_MAJOR_ARRAY <<< "$PACKAGES_EXCLUDE_MAJOR"
             
-            # Run through all packages in PACKAGES_EXCLUDE_MAJOR
+            # Run through all packages in PACKAGES_EXCLUDE_MAJOR_ARRAY
             # For each package name, check if an update is available by looking in $CHECK_UPDATE_TMP
-            for PACKAGE in "${PACKAGES_EXCLUDE_MAJOR[@]}"; do
+            for PACKAGE in "${PACKAGES_EXCLUDE_MAJOR_ARRAY[@]}"; do
 
                 # If package occurence is found in $CHECK_UPDATE_TMP, then it means that an update is available for this package
                 # We will have to check if it is a major release update or a minor release update
@@ -173,17 +173,17 @@ function checkPackagesBeforeUpdate
         fi
 
         # Process packages to exclude no matter the release update, they always have to be excluded.
-        if [ ! -z "$CONF_SOFT_EXCLUDE" ];then
+        if [ ! -z "$PACKAGES_EXCLUDE" ];then
 
-            PACKAGES_EXCLUDE=""
+            PACKAGES_EXCLUDE_ARRAY=""
             IFS=','
 
-            # Inject exclusion list into PACKAGES_EXCLUDE
-            read -ra PACKAGES_EXCLUDE <<< "$CONF_SOFT_EXCLUDE"
+            # Inject exclusion list into PACKAGES_EXCLUDE_ARRAY
+            read -ra PACKAGES_EXCLUDE_ARRAY <<< "$PACKAGES_EXCLUDE"
 
-            # Run through all packages in PACKAGES_EXCLUDE_MAJOR
+            # Run through all packages in PACKAGES_EXCLUDE
             # For each package name, check if an update is available by looking in $CHECK_UPDATE_TMP
-            for PACKAGE in "${PACKAGES_EXCLUDE[@]}";do
+            for PACKAGE in "${PACKAGES_EXCLUDE_ARRAY[@]}";do
 
                 # If package occurence is found in $CHECK_UPDATE_TMP, then it means that an update is available for this package
                 # It will be excluded
@@ -214,18 +214,38 @@ function checkPackagesBeforeUpdate
     fi
 
     # Process services that will need a restart after packages update
-    if [ ! -z "$CONF_SOFT_NEED_RESTART" ];then
+    if [ ! -z "$SERVICE_RESTART" ];then
         OLD_IFS=$IFS
         IFS=','
 
         # Inject services list into SERVICES_TO_RESTART
-        read -ra SERVICES_TO_RESTART <<< "$CONF_SOFT_NEED_RESTART"
+        read -ra SERVICES_TO_RESTART <<< "$SERVICE_RESTART"
 
         # Run through SERVICES_TO_RESTART
         for SERVICE in "${SERVICES_TO_RESTART[@]}"; do
-            # Check if specified service really exists, if yes then add it to the final services to restart list
+            # If service restart is conditionned by a specific package update, then get the package name, e.g:
+            # httpd:ca-certificates => httpd service will be restarted if ca-certificates package is updated
+            if echo "$SERVICE" | grep -q ":"; then
+                SERVICE_CONDITIONNAL_PACKAGE_NAME=$(echo "$SERVICE" | awk -F: '{print $2}')
+                SERVICE=$(echo "$SERVICE" | awk -F: '{print $1}')
+
+                # If conditionnal package is empty, ignore this service and continue
+                if [ -z "$SERVICE_CONDITIONNAL_PACKAGE_NAME" ];then
+                    continue
+                fi
+
+                # Check if the package is in the list of packages that will be updated, if not then ignore this service and continue
+                if ! printf '%s\n' "${PACKAGES[@]}" | grep -q "^${SERVICE_CONDITIONNAL_PACKAGE_NAME}$";then
+                    continue
+                fi
+            fi
+
+            # Check if specified service really exists, if yes, then add it to the final services to restart list
             if systemctl list-units --all -t service --full | grep -q "${SERVICE}.service";then
-                SERVICE_TO_BE_RESTARTED+=" $SERVICE"
+                # Also check if the service is active
+                if systemctl is-active --quiet "$SERVICE";then
+                    SERVICE_TO_BE_RESTARTED+=" $SERVICE"
+                fi
             fi
         done
 
@@ -254,7 +274,7 @@ function checkPackagesBeforeUpdate
         echo -e "${YELLOW}No available package for update${RESET}\n"
 
         # Indicate that there is no need to execute apt/yum packages update
-        SOMETHING_TO_UPDATE="no"
+        SOMETHING_TO_UPDATE="false"
 
         return
     fi
@@ -270,7 +290,7 @@ function checkPackagesBeforeUpdate
     fi
 
     while read PACKAGE;do
-        # Packahe name
+        # Package name
         PKG_NAME=$(echo "$PACKAGE" | awk '{print $1}')
 
         # Package version update that is available and will be installed
diff --git a/functions/04_update b/functions/04_update
index e7afe6c..0972393 100644
--- a/functions/04_update
+++ b/functions/04_update
@@ -4,7 +4,7 @@ function update
 {
     # Si la vérification des paquets n'a trouvé aucun paquet à mettre à jour alors il est inutile d'exécuter les mises à jour
     # On sort de la fonction
-    if [ "$SOMETHING_TO_UPDATE" == "no" ];then
+    if [ "$SOMETHING_TO_UPDATE" == "false" ];then
         return
     fi
 
diff --git a/functions/09_service-restart b/functions/09_service-restart
index ab2bfe1..dfd1e51 100644
--- a/functions/09_service-restart
+++ b/functions/09_service-restart
@@ -1,24 +1,30 @@
 #!/usr/bin/env bash
-# Redémarrage des services post-mise à jour
+# Restart services after update
 
 function restartService
 {
-    # Si $SERVICE_TO_BE_RESTARTED contient des services nécessitant un redémarrage, on traite
-    if [ ! -z "$SERVICE_TO_BE_RESTARTED" ];then
-        OLD_IFS=$IFS
-        IFS=' '
+    # If $SERVICE_TO_BE_RESTARTED contains services that need to be restarted
+    if [ -z "$SERVICE_TO_BE_RESTARTED" ];then
+        return
+    fi
 
-        for SERVICE in $(echo "$SERVICE_TO_BE_RESTARTED"); do
-            SERVICE=$(echo "$SERVICE" | sed 's/ //g')
-            echo -ne "→ Restarting ${YELLOW}${SERVICE}${RESET} service: "
-            systemctl restart "$SERVICE" --quiet
-            if [ "$?" != "0" ];then
-                echo -e "[$YELLOW ERROR $RESET] while restarting"
-            else
-                echo -e "[$GREEN OK $RESET]"
-            fi
-        done
+    OLD_IFS=$IFS
+    IFS=' '
 
-        IFS=$OLD_IFS
-    fi
+    for SERVICE in $(echo "$SERVICE_TO_BE_RESTARTED"); do
+        # Clean eventual spaces
+        SERVICE=$(echo "$SERVICE" | sed 's/ //g')
+
+        echo -ne "→ Restarting ${YELLOW}${SERVICE}${RESET} service: "
+
+        systemctl restart "$SERVICE" --quiet
+
+        if [ "$?" != "0" ];then
+            echo -e "[$YELLOW ERROR $RESET] while restarting"
+        else
+            echo -e "[$GREEN OK $RESET]"
+        fi
+    done
+
+    IFS=$OLD_IFS
 }
\ No newline at end of file
diff --git a/functions/10_send-mail b/functions/10_send-mail
index 5a3dbf0..4e01a9b 100644
--- a/functions/10_send-mail
+++ b/functions/10_send-mail
@@ -2,7 +2,7 @@
 
 function sendMail
 {
-    if [ "$MAIL_ENABLED" == "yes" ];then
+    if [ "$MAIL_ENABLED" == "true" ];then
         # Remove ANSI color codes before sending mail:
         sed 's,\x1B[[(][0-9;]*[a-zA-Z],,g' "$LOG" > "$LOG_REPORT_MAIL"
 
diff --git a/linupdate b/linupdate
index 9cefd18..8720d36 100755
--- a/linupdate
+++ b/linupdate
@@ -32,13 +32,13 @@ VIRT_TYPE=""
 PKG_MANAGER=""
 PKG_TYPE=""
 PROFILE=""
-SERVER_ENV=""
+ENV=""
 FAILLEVEL=""
 MAIL_ENABLED=""
 MAIL_RECIPIENT=""
-CONF_SOFT_EXCLUDE_MAJOR=""
-CONF_SOFT_EXCLUDE=""
-CONF_SOFT_NEED_RESTART=""
+PACKAGES_EXCLUDE_MAJOR=""
+PACKAGES_EXCLUDE=""
+SERVICE_RESTART=""
 HISTORIQUE="${BASE_DIR}/linupdate.history"                     # Packages updates history file
 REPORT="${DATE_YMD}_${TIME_FULL}_linupdate_${HOSTNAME}.log"    # Name of the log/report file
 LOG="${LOGS_DIR}/${REPORT}"                                    # Location of the log/report file
@@ -48,7 +48,7 @@ APT_OPTIONS=""
 YUM_OPTIONS=""
 KEEP_OLDCONF="0"
 UPDATE_ERROR="0"
-SOMETHING_TO_UPDATE="yes"
+SOMETHING_TO_UPDATE="true"
 ONLY_CHECK_UPDATE="false"
 IGNORE_EXCLUDE="0"
 UPDATE_EXCLUDE=""
@@ -129,6 +129,18 @@ checkSystem
 # Generate config file if not exist
 generateConf
 
+# Patch 2.2.12
+if [ -f "$CONF" ];then
+    # Replace NEED_RESTART by SERVICE_RESTART
+    sed -i "s/^NEED_RESTART/SERVICE_RESTART/g" "$CONF"
+    # Remove ALLOW_SELF_UPDATE
+    sed -i "/^ALLOW_SELF_UPDATE/d" "$CONF"
+    # Replace "yes" by "true" in MAIL_ENABLED
+    sed -i 's/^MAIL_ENABLED="yes"/MAIL_ENABLED="true"/g' "$CONF"
+    # Replace "no" by "false" in MAIL_ENABLED
+    sed -i 's/^MAIL_ENABLED="no"/MAIL_ENABLED="false"/g' "$CONF"
+fi
+
 
 ## ↓ EXECUTION ↓ ##
 
@@ -190,8 +202,8 @@ while [ $# -ge 1 ];do
         --environment|--env)
             # If nothing has been specified then print actual env
             if [ -z "$2" ];then
-                ENV=$(grep "^ENV=" $CONF | sed 's/ENV=//g' | sed 's/"//g')
-                echo -e "Current environment: ${YELLOW}$ENV${RESET}"
+                CURRENT_ENV=$(grep "^ENV=" $CONF | sed 's/ENV=//g' | sed 's/"//g')
+                echo -e "Current environment: ${YELLOW}$CURRENT_ENV${RESET}"
             else
                 # If an env name has been specified then replace actual env with it
                 if grep -q "ENV=" $CONF;then
@@ -341,7 +353,7 @@ if [ ! -z "$VIRT_TYPE" ];then
     echo -e " Virtualization:               ${YELLOW}${VIRT_TYPE}${RESET}"
 fi
 echo -e " Profile:                      ${YELLOW}${PROFILE}${RESET}"
-echo -e " Environment:                  ${YELLOW}${SERVER_ENV}${RESET}"
+echo -e " Environment:                  ${YELLOW}${ENV}${RESET}"
 echo -e " Executed on:                  ${YELLOW}${DATE_DMY} ${TIME}${RESET}"
 echo -ne " Executed by:                 ${YELLOW} "; whoami; echo -ne "${RESET}"
 echo -ne " Execution method: "
diff --git a/mods-available/configurations/reposerver.conf b/mods-available/configurations/reposerver.conf
index f67ef76..b0457c9 100644
--- a/mods-available/configurations/reposerver.conf
+++ b/mods-available/configurations/reposerver.conf
@@ -6,7 +6,6 @@ ID=""
 TOKEN=""
 GET_PROFILE_PKG_CONF_FROM_REPOSERVER=""
 GET_PROFILE_REPOS_FROM_REPOSERVER=""
-GET_PROFILE_PARAMS_OVERWRITE=""
 
 [REPOSERVER]
 IP=""
diff --git a/mods-available/reposerver.mod b/mods-available/reposerver.mod
index 27c3857..2280fdc 100644
--- a/mods-available/reposerver.mod
+++ b/mods-available/reposerver.mod
@@ -212,7 +212,6 @@ function mod_help
     echo -e "  --register                    → Register this host to reposerver"
     echo -e "  --unregister                  → Unregister this host from reposerver"
     echo -e "  --get-server-conf             → Get reposerver global configuration."
-    echo -e "  --get-profile-conf            → Get profile global configuration from reposerver."
     echo -e "  --get-profile-packages-conf   → Get profile packages excludes configurtion from reposerver."
     echo -e "  --get-profile-repos           → Get repos sources configuration from reposerver."
     echo -e "  --send-general-status         → Send host global informations to reposerver (OS, version, kernel..)"
@@ -293,7 +292,6 @@ function mod_configure
     FAILLEVEL=""
     GET_PROFILE_PKG_CONF_FROM_REPOSERVER=""
     GET_PROFILE_REPOS_FROM_REPOSERVER=""
-    GET_PROFILE_PARAMS_OVERWRITE=""
 
     # Variables de status
     UPDATE_REQUEST_TYPE=""
@@ -407,32 +405,17 @@ function mod_configure
                     sed -i "s/GET_PROFILE_REPOS_FROM_REPOSERVER=.*/GET_PROFILE_REPOS_FROM_REPOSERVER=\"$GET_PROFILE_REPOS_FROM_REPOSERVER\"/g" $MOD_CONF
                 fi
             ;;
-            --allow-overwrite)
-                if [ "$2" == "yes" ];then
-                    GET_PROFILE_PARAMS_OVERWRITE="true"
-                else
-                    GET_PROFILE_PARAMS_OVERWRITE="false"
-                fi
-                shift
-
-                # Ajout du paramètre dans le fichier de conf
-                if ! grep -q "^GET_PROFILE_PARAMS_OVERWRITE" $MOD_CONF;then
-                    sed -i "/^\[CLIENT\]/a GET_PROFILE_PARAMS_OVERWRITE=\"$GET_PROFILE_PARAMS_OVERWRITE\"" $MOD_CONF
-                else 
-                    sed -i "s/GET_PROFILE_PARAMS_OVERWRITE=.*/GET_PROFILE_PARAMS_OVERWRITE=\"$GET_PROFILE_PARAMS_OVERWRITE\"/g" $MOD_CONF
-                fi
-            ;;
             # Récupération de la configuration complète du serveur Repomanager distant
             --get-server-conf|--server-get-conf)
                 getModConf
                 getServerConf
                 clean_exit
             ;;
-            --get-profile-conf|--profile-get-conf)
-                getModConf
-                getProfileConf
-                clean_exit
-            ;;
+            # --get-profile-conf|--profile-get-conf)
+            #     getModConf
+            #     getProfileConf
+            #     clean_exit
+            # ;;
             --get-profile-packages-conf)
                 getModConf
                 getProfilePackagesConf
@@ -498,18 +481,14 @@ function mod_configure
 # Retourner 0 si tout est OK
 function mod_load
 {
-    # Patch 2.1.0:
-    # Changing params names and values
+    # Patch 2.2.12
     if [ -f "$MOD_CONF" ];then
-        if [ -f "$MOD_CONF" ];then
-            sed -i 's/REPOSERVER_ALLOW_CONFUPDATE/GET_PROFILE_PKG_CONF_FROM_REPOSERVER/g' "$MOD_CONF"
-            sed -i 's/REPOSERVER_ALLOW_REPOSFILES_UPDATE/GET_PROFILE_REPOS_FROM_REPOSERVER/g' "$MOD_CONF"
-            sed -i 's/REPOSERVER_ALLOW_OVERWRITE/GET_PROFILE_PARAMS_OVERWRITE/g' "$MOD_CONF"
-            sed -i 's/"yes"/"true"/g' "$MOD_CONF"
-            sed -i 's/"no"/"false"/g' "$MOD_CONF"
-            sed -i '/MANAGE_CLIENTS_CONF/d' "$MOD_CONF"
-            sed -i '/MANAGE_CLIENTS_REPOSCONF/d' "$MOD_CONF"
-        fi
+        # Remove REPOSERVER_MANAGE_CLIENT_CONF
+        sed -i '/REPOSERVER_MANAGE_CLIENT_CONF/d' "$MOD_CONF"
+        # Remove REPOSERVER_MANAGE_CLIENT_REPOS
+        sed -i '/REPOSERVER_MANAGE_CLIENT_REPOS/d' "$MOD_CONF"
+        # Remove GET_PROFILE_PARAMS_OVERWRITE
+        sed -i '/GET_PROFILE_PARAMS_OVERWRITE/d' "$MOD_CONF"
     fi
 
     echo -e "  - ${YELLOW}reposerver${RESET}"
@@ -557,12 +536,7 @@ function mod_load
     else
         grep "^GET_PROFILE_PKG_CONF_FROM_REPOSERVER=" "$MOD_CONF" >> "$TMP_MOD_CONF"
     fi
-    # Si le paramètre GET_PROFILE_PARAMS_OVERWRITE est manquant alors on l'ajoute avec une valeur par défaut
-    if ! grep -q "^GET_PROFILE_PARAMS_OVERWRITE=" "$MOD_CONF";then
-        echo "GET_PROFILE_PARAMS_OVERWRITE=\"false\"" >> "$TMP_MOD_CONF"
-    else
-        grep "^GET_PROFILE_PARAMS_OVERWRITE=" "$MOD_CONF" >> "$TMP_MOD_CONF"
-    fi
+
     # Si le paramètre GET_PROFILE_REPOS_FROM_REPOSERVER est manquant alors on l'ajoute avec une valeur par défaut
     if ! grep -q "^GET_PROFILE_REPOS_FROM_REPOSERVER=" "$MOD_CONF";then
         echo "GET_PROFILE_REPOS_FROM_REPOSERVER=\"false\"" >> "$TMP_MOD_CONF"
@@ -617,7 +591,6 @@ function getModConf
     TOKEN="$(grep "^TOKEN=" $MOD_CONF | cut -d'=' -f2 | sed 's/"//g')"
     GET_PROFILE_PKG_CONF_FROM_REPOSERVER="$(grep "^GET_PROFILE_PKG_CONF_FROM_REPOSERVER=" $MOD_CONF | cut -d'=' -f2 | sed 's/"//g')"
     GET_PROFILE_REPOS_FROM_REPOSERVER="$(grep "^GET_PROFILE_REPOS_FROM_REPOSERVER=" $MOD_CONF | cut -d'=' -f2 | sed 's/"//g')"
-    GET_PROFILE_PARAMS_OVERWRITE="$(grep "^GET_PROFILE_PARAMS_OVERWRITE=" $MOD_CONF | cut -d'=' -f2 | sed 's/"//g')"
 
     # Configuration serveur (section [REPOSERVER])
     REPOSERVER_URL="$(grep "^URL=" $MOD_CONF | cut -d'=' -f2 | sed 's/"//g')"
@@ -677,8 +650,6 @@ function getServerConf
         REPOSERVER_IP=$(_jq '.Ip')
         REPOSERVER_URL=$(_jq '.Url')
         REPOSERVER_PACKAGE_TYPE=$(_jq '.Package_type')
-        REPOSERVER_MANAGE_CLIENT_CONF=$(_jq '.Manage_client_conf')
-        REPOSERVER_MANAGE_CLIENT_REPOS=$(_jq '.Manage_client_repos')
     done
 
     # Retrieve the server IP address from the server URL
@@ -697,20 +668,6 @@ function getServerConf
         fi
     done
 
-    # converting to boolean
-    if [ "$REPOSERVER_MANAGE_CLIENT_CONF" == "no" ];then
-        REPOSERVER_MANAGE_CLIENT_CONF="false"
-    fi
-    if [ "$REPOSERVER_MANAGE_CLIENT_CONF" == "yes" ];then
-        REPOSERVER_MANAGE_CLIENT_CONF="true"
-    fi
-    if [ "$REPOSERVER_MANAGE_CLIENT_REPOS" == "no" ];then
-        REPOSERVER_MANAGE_CLIENT_REPOS="false"
-    fi
-    if [ "$REPOSERVER_MANAGE_CLIENT_REPOS" == "yes" ];then
-        REPOSERVER_MANAGE_CLIENT_REPOS="true"
-    fi
-
     # Sauvegarde de la partie [MODULE]
     sed -n -e '/\[MODULE\]/,/^$/p' "$MOD_CONF" > "$TMP_FILE_MODULE"
     # Ajout d'un saut de ligne car chaque section doit être correctement séparée
@@ -763,66 +720,66 @@ function preCheck
 }
 
 # Get profile general configuration from reposerver
-function getProfileConf
-{
-    # Si le serveur reposerver ne gère pas les profils ou que le client refuse d'être mis à jour par son serveur de repo, on quitte la fonction
-    echo -ne "  → Getting ${YELLOW}${PROFILE}${RESET} profile configuration: "
-
-    # Demande de la configuration des repos auprès du serveur de repos
-    # Ce dernier renverra la configuration au format JSON
-    CURL=$(curl -L --post301 -s -q -H "Authorization: Host $HOST_ID:$TOKEN" -X GET "${REPOSERVER_URL}/api/v2/profile/${PROFILE}" 2> /dev/null)
-    curl_result_parse
-
-    # Si il y a eu une erreur lors de la requête on quitte la fonction
-    if [ "$CURL_ERROR" != "0" ];then
-        return 2
-    fi
-
-    # Puis on récupère la configuration transmise par le serveur au format JSON
-    # On parcourt chaque configuration et on récupère le nom du fichier à créer, la description et le contenu à insérer
-    # On remplace à la volée l'environnement dans le contenu récupéré
-    for ROW in $(echo "${CURL}" | jq -r '.results[] | @base64'); do
-        _jq() {
-            echo ${ROW} | base64 --decode | jq -r ${1}
-        }
-
-        GET_PROFILE_PKG_CONF_FROM_REPOSERVER=$(_jq '.Linupdate_get_pkg_conf')
-        GET_PROFILE_REPOS_FROM_REPOSERVER=$(_jq '.Linupdate_get_repos_conf')
-    done
-
-    if [ "$GET_PROFILE_PKG_CONF_FROM_REPOSERVER" == "null" ];then
-        echo -e "[$YELLOW ERROR $RESET] Server sent ${YELLOW}null${RESET} data"
-        return 2
-    fi
-
-    if [ "$GET_PROFILE_REPOS_FROM_REPOSERVER" == "null" ];then
-        echo -e "[$YELLOW ERROR $RESET] Server sent ${YELLOW}null${RESET} data"
-        return 2
-    fi
-
-    # converting to boolean
-    if [ "$GET_PROFILE_PKG_CONF_FROM_REPOSERVER" == "no" ];then
-        GET_PROFILE_PKG_CONF_FROM_REPOSERVER="false"
-    fi
-    if [ "$GET_PROFILE_PKG_CONF_FROM_REPOSERVER" == "yes" ];then
-        GET_PROFILE_PKG_CONF_FROM_REPOSERVER="true"
-    fi
-    if [ "$GET_PROFILE_REPOS_FROM_REPOSERVER" == "no" ];then
-        GET_PROFILE_REPOS_FROM_REPOSERVER="false"
-    fi
-    if [ "$GET_PROFILE_REPOS_FROM_REPOSERVER" == "yes" ];then
-        GET_PROFILE_REPOS_FROM_REPOSERVER="true"
-    fi
-
-    # On applique la nouvelle configuration récupérée
-    sed -i "s/GET_PROFILE_PKG_CONF_FROM_REPOSERVER.*/GET_PROFILE_PKG_CONF_FROM_REPOSERVER=\"$GET_PROFILE_PKG_CONF_FROM_REPOSERVER\"/g" "$MOD_CONF"
-    sed -i "s/GET_PROFILE_REPOS_FROM_REPOSERVER.*/GET_PROFILE_REPOS_FROM_REPOSERVER=\"$GET_PROFILE_REPOS_FROM_REPOSERVER\"/g" "$MOD_CONF"
-
-    echo -e "[${GREEN} OK ${RESET}]"
-
-    # Enfin on applique la nouvelle conf en récupérant de nouveau les paramètres du fichier de conf :
-    getConf
-}
+# function getProfileConf
+# {
+#     # Si le serveur reposerver ne gère pas les profils ou que le client refuse d'être mis à jour par son serveur de repo, on quitte la fonction
+#     echo -ne "  → Getting ${YELLOW}${PROFILE}${RESET} profile configuration: "
+
+#     # Demande de la configuration des repos auprès du serveur de repos
+#     # Ce dernier renverra la configuration au format JSON
+#     CURL=$(curl -L --post301 -s -q -H "Authorization: Host $HOST_ID:$TOKEN" -X GET "${REPOSERVER_URL}/api/v2/profile/${PROFILE}" 2> /dev/null)
+#     curl_result_parse
+
+#     # Si il y a eu une erreur lors de la requête on quitte la fonction
+#     if [ "$CURL_ERROR" != "0" ];then
+#         return 2
+#     fi
+
+#     # Puis on récupère la configuration transmise par le serveur au format JSON
+#     # On parcourt chaque configuration et on récupère le nom du fichier à créer, la description et le contenu à insérer
+#     # On remplace à la volée l'environnement dans le contenu récupéré
+#     for ROW in $(echo "${CURL}" | jq -r '.results[] | @base64'); do
+#         _jq() {
+#             echo ${ROW} | base64 --decode | jq -r ${1}
+#         }
+
+#         GET_PROFILE_PKG_CONF_FROM_REPOSERVER=$(_jq '.Linupdate_get_pkg_conf')
+#         GET_PROFILE_REPOS_FROM_REPOSERVER=$(_jq '.Linupdate_get_repos_conf')
+#     done
+
+#     if [ "$GET_PROFILE_PKG_CONF_FROM_REPOSERVER" == "null" ];then
+#         echo -e "[$YELLOW ERROR $RESET] Server sent ${YELLOW}null${RESET} data"
+#         return 2
+#     fi
+
+#     if [ "$GET_PROFILE_REPOS_FROM_REPOSERVER" == "null" ];then
+#         echo -e "[$YELLOW ERROR $RESET] Server sent ${YELLOW}null${RESET} data"
+#         return 2
+#     fi
+
+#     # converting to boolean
+#     if [ "$GET_PROFILE_PKG_CONF_FROM_REPOSERVER" == "no" ];then
+#         GET_PROFILE_PKG_CONF_FROM_REPOSERVER="false"
+#     fi
+#     if [ "$GET_PROFILE_PKG_CONF_FROM_REPOSERVER" == "yes" ];then
+#         GET_PROFILE_PKG_CONF_FROM_REPOSERVER="true"
+#     fi
+#     if [ "$GET_PROFILE_REPOS_FROM_REPOSERVER" == "no" ];then
+#         GET_PROFILE_REPOS_FROM_REPOSERVER="false"
+#     fi
+#     if [ "$GET_PROFILE_REPOS_FROM_REPOSERVER" == "yes" ];then
+#         GET_PROFILE_REPOS_FROM_REPOSERVER="true"
+#     fi
+
+#     # On applique la nouvelle configuration récupérée
+#     sed -i "s/GET_PROFILE_PKG_CONF_FROM_REPOSERVER.*/GET_PROFILE_PKG_CONF_FROM_REPOSERVER=\"$GET_PROFILE_PKG_CONF_FROM_REPOSERVER\"/g" "$MOD_CONF"
+#     sed -i "s/GET_PROFILE_REPOS_FROM_REPOSERVER.*/GET_PROFILE_REPOS_FROM_REPOSERVER=\"$GET_PROFILE_REPOS_FROM_REPOSERVER\"/g" "$MOD_CONF"
+
+#     echo -e "[${GREEN} OK ${RESET}]"
+
+#     # Enfin on applique la nouvelle conf en récupérant de nouveau les paramètres du fichier de conf :
+#     getConf
+# }
 
 # Get profile packages configuratin (packages excludes)
 function getProfilePackagesConf
@@ -839,15 +796,9 @@ function getProfilePackagesConf
         return 2
     fi
 
-    if [ "$REPOSERVER_MANAGE_CLIENT_CONF" == "false" ] || [ "$GET_PROFILE_PKG_CONF_FROM_REPOSERVER" == "false" ];then
-        if [ "$REPOSERVER_MANAGE_CLIENT_CONF" == "false" ];then
-            echo -e "${YELLOW}Disabled (not handled by reposerver)${RESET}"
-            return 1
-        fi
-        if [ "$GET_PROFILE_PKG_CONF_FROM_REPOSERVER" == "false" ];then
-            echo -e "${YELLOW}Disabled by profile configuration${RESET}"
-            return 1
-        fi
+    if [ "$GET_PROFILE_PKG_CONF_FROM_REPOSERVER" == "false" ];then
+        echo -e "${YELLOW}Disabled${RESET}"
+        return 1
     fi
 
     # Puis on récupère la configuration transmise par le serveur au format JSON
@@ -860,7 +811,7 @@ function getProfilePackagesConf
 
         EXCLUDE_MAJOR=$(_jq '.Package_exclude_major')
         EXCLUDE=$(_jq '.Package_exclude')
-        NEED_RESTART=$(_jq '.Service_restart')
+        SERVICE_RESTART=$(_jq '.Service_restart')
     done
 
     # Si la valeur des paramètres == null alors cela signifie qu'il n'y a aucune exclusion de paquet
@@ -870,8 +821,8 @@ function getProfilePackagesConf
     if [ "$EXCLUDE" == "null" ];then
         EXCLUDE=""
     fi
-    if [ "$NEED_RESTART" == "null" ];then
-        NEED_RESTART=""
+    if [ "$SERVICE_RESTART" == "null" ];then
+        SERVICE_RESTART=""
     fi
 
     # On applique la nouvelle configuration récupérée
@@ -879,7 +830,7 @@ function getProfilePackagesConf
     sed -i '/^\[SOFTWARE CONFIGURATION\]/,$d' "$CONF" &&
 
     # Puis on injecte la nouvelle conf récupérée
-    echo -e "[SOFTWARE CONFIGURATION]\nEXCLUDE_MAJOR=\"${EXCLUDE_MAJOR}\"\nEXCLUDE=\"${EXCLUDE}\"\nNEED_RESTART=\"${NEED_RESTART}\"" >> "$CONF"
+    echo -e "[SOFTWARE CONFIGURATION]\nEXCLUDE_MAJOR=\"${EXCLUDE_MAJOR}\"\nEXCLUDE=\"${EXCLUDE}\"\nSERVICE_RESTART=\"${SERVICE_RESTART}\"" >> "$CONF"
 
     echo -e "[${GREEN} OK ${RESET}]"
 
@@ -912,15 +863,9 @@ function getProfileRepos
         return 2
     fi
 
-    if [ "$REPOSERVER_MANAGE_CLIENT_REPOS" == "false" ] || [ "$GET_PROFILE_REPOS_FROM_REPOSERVER" == "false" ];then
-        if [ "$REPOSERVER_MANAGE_CLIENT_REPOS" != "true" ];then
-            echo -e "${YELLOW}Disabled (not handled by reposerver)${RESET}"
-            return 1
-        fi
-        if [ "$GET_PROFILE_REPOS_FROM_REPOSERVER" != "true" ];then
-            echo -e "${YELLOW}Disabled by profile configuration${RESET}"
-            return 1
-        fi
+    if [ "$GET_PROFILE_REPOS_FROM_REPOSERVER" == "false" ];then
+        echo -e "${YELLOW}Disabled${RESET}"
+        return 1
     fi
 
     # Si le paramètre existe alors on peut continuer le traitement
@@ -944,7 +889,7 @@ function getProfileRepos
 
         FILENAME=$(_jq '.filename')
         DESCRIPTION=$(_jq '.description')
-        CONTENT=$(_jq '.content' | sed "s/__ENV__/${SERVER_ENV}/g")
+        CONTENT=$(_jq '.content' | sed "s/__ENV__/${ENV}/g")
 
         if [ "$OS_FAMILY" == "Redhat" ];then
             FILENAME_PATH="/etc/yum.repos.d/$FILENAME"
@@ -1020,10 +965,10 @@ function pre
     if [ "$FAILLEVEL" -eq "2" ] && [ "$RESULT" -ge "2" ];then (( MOD_ERROR++ )); clean_exit;fi
 
     # On met à jour notre configuration à partir du serveur de repo (profils), si cela est autorisé des deux côtés
-    getProfileConf
-    RESULT="$?"
-    if [ "$FAILLEVEL" -eq "1" ] && [ "$RESULT" -gt "0" ];then (( MOD_ERROR++ )); clean_exit;fi
-    if [ "$FAILLEVEL" -eq "2" ] && [ "$RESULT" -ge "2" ];then (( MOD_ERROR++ )); clean_exit;fi
+    # getProfileConf
+    # RESULT="$?"
+    # if [ "$FAILLEVEL" -eq "1" ] && [ "$RESULT" -gt "0" ];then (( MOD_ERROR++ )); clean_exit;fi
+    # if [ "$FAILLEVEL" -eq "2" ] && [ "$RESULT" -ge "2" ];then (( MOD_ERROR++ )); clean_exit;fi
 
     getProfilePackagesConf
     RESULT="$?"
@@ -1057,7 +1002,7 @@ function post
     update_request_status
 
     # Si il y a eu des paquets à mettre à jour lors de cette exécution alors on exécute les actions suivantes
-    if [ "$SOMETHING_TO_UPDATE" == "yes" ];then
+    if [ "$SOMETHING_TO_UPDATE" == "true" ];then
         # Généralement les paquets "*-release" sur Redhat/CentOS remettent en place des fichiers .repo. Si un paquet de ce type a été mis à jour alors on remets à jour la configuration des repos à partir du serveurs de repo (profils), si cela est autorisé des deux côtés
         if echo "${PACKAGES[*]}" | grep -q "-release";then
             getProfileRepos
@@ -1186,8 +1131,8 @@ function send_general_status
     if [ ! -z "$PROFILE" ];then
         CURL_PARAMS+="\"profile\":\"$PROFILE\","
     fi
-    if [ ! -z "$SERVER_ENV" ];then
-        CURL_PARAMS+="\"env\":\"$SERVER_ENV\","
+    if [ ! -z "$ENV" ];then
+        CURL_PARAMS+="\"env\":\"$ENV\","
     fi
     if [ ! -z "$AGENT_STATUS" ];then
         CURL_PARAMS+="\"agent_status\":\"$AGENT_STATUS\","
diff --git a/version b/version
index 4c22129..c45a01d 100644
--- a/version
+++ b/version
@@ -1 +1 @@
-2.2.11
\ No newline at end of file
+2.2.12
\ No newline at end of file