This module manages the configuration of Shorewall (http://www.shorewall.net/)
This module requires the augeas module, you can find that here: https://gitlab.com/shared-puppet-modules-group/augeas.git
This module requires the concat module, you can find that here: https://github.com/puppetlabs/puppetlabs-concat.git
Copyright (C) 2007 David Schmitt [email protected] adapted by immerda project group - admin+puppet(at)immerda.ch adapted by Puzzle ITC - haerry+puppet(at)puzzle.ch
Copyright (c) 2009 Riseup Networks - micah(shift+2)riseup.net
Copyright (c) 2010 intrigeri - intrigeri(at)boum.org See LICENSE for the full license granted to you.
Based on the work of ADNET Ghislain [email protected] from AQUEOS at https://reductivelabs.com/trac/puppet/wiki/AqueosShorewall
Merged from:
- git://git.puppet.immerda.ch/module-shorewall.git
- git://labs.riseup.net/module_shorewall
- https://gitlab.com/shared-puppet-modules-group/shorewall.git
- check if shorewall compiles without errors, otherwise fail !
If you need to install a specific version of shorewall other than the default one that would be installed by 'ensure => present', then you can set the following variable and that specific version will be installed instead:
$shorewall_ensure_version = "4.0.15-1"
The main shorewall.conf is not managed by this module, rather the default one that your operatingsystem provides is used, and any modifications you wish to do to it should be configured with augeas, for example, to set IP_FORWARDING=Yes in shorewall.conf, simply do this:
augeas { 'enable_ip_forwarding':
changes => 'set /files/etc/shorewall/shorewall.conf/IP_FORWARDING Yes',
lens => 'Shellvars.lns',
incl => '/etc/shorewall/shorewall.conf',
notify => Service[shorewall];
}
NOTE: this requires the augeas ruby bindings newer than 0.7.3.
If you need to, you can provide an entire shorewall.conf by passing its source to the main class:
class{'shorewall':
conf_source => "puppet:///modules/site_shorewall/${::fqdn}/shorewall.conf.${::operatingsystem}",
}
NOTE: if you distribute a file, you cannot also use augeas, puppet and augeas will fight forever. Secondly, you will need to make sure that if you are shipping your own shorewall.conf that you have the following value set in your shorewall.conf otherwise this module will not work:
CONFIG_PATH="/etc/shorewall/puppet:/etc/shorewall:/usr/share/shorewall"
There are some features that have been deprecated upstream that may still be supported by this module on certain shorewall major version. Please note the following:
- the blacklist file and option is deprecated and replaced by blrules
- the rfc1918 file and norfc1918 option are deprecated
- the tcrules file is deprecated, replaced by mangled
- the routestopped file is deprecated and replaced by stoppedrules
You should migrate your own calls to this module to move to the currently supported methods, we will be dropping support for deprecated features as the available distribution version permit it. For more details see http://www.shorewall.net/upgrade_issues.htm
see also: http://reductivelabs.com/trac/puppet/wiki/Recipes/AqueosShorewall
The shorewall::rules::torify define can be used to force some outgoing TCP traffic through the Tor transparent proxy. The corresponding non-TCP traffic is rejected accordingly.
Beware! This define only is part of a torified setup. DNS requests and IPv6, amongst others, might leak network activity you would prefer not to. You really need to read proper documentation about these matters before using this feature e.g.:
https://www.torproject.org/download/download.html.en#warning
The Tor transparent proxy location defaults to 127.0.0.1:9040 and can be configured by setting the $tor_transparent_proxy_host and $tor_transparent_proxy_port variables before including the main shorewall class.
Example usage follows.
Torify any outgoing TCP traffic originating from user bob or alice and aimed at 6.6.6.6 or 7.7.7.7:
shorewall::rules::torify {
'torify-some-bits':
users => [ 'bob', 'alice' ],
destinations => [ '6.6.6.6', '7.7.7.7' ];
}
Torify any outgoing TCP traffic to 8.8.8.8:
shorewall::rules::torify {
'torify-to-this-host':
destinations => [ '8.8.8.8' ];
}
When no destination nor user is provided any outgoing TCP traffic (see restrictions bellow) is torified. In that case the user running the Tor client ($tor_user) is whitelisted; this variable defaults to "debian-tor" on Debian systems and to "tor" on others. if this does not suit your configuration you need to set the $tor_user variable before including the main shorewall class.
When no destination is provided traffic directed to RFC1918 addresses is by default allowed and (obviously) not torified. This behaviour can be changed by setting the allow_rfc1918 parameter to false.
Torify any outgoing TCP traffic but connections to RFC1918 addresses:
shorewall::rules::torify {
'torify-everything-but-lan':
}
Torify any outgoing TCP traffic:
shorewall::rules::torify {
'torify-everything:
allow_rfc1918 => false;
}
In some cases (e.g. when providing no specific destination nor user and denying access to RFC1918 addresses) UDP DNS requests may be rejected. This is intentional: it does not make sense leaking -via DNS requests- network activity that would otherwise be torified. In that case you probably want to read proper documentation about such matters, enable the Tor DNS resolver and redirect DNS requests through it.
Example from node.pp:
node xy {
class{'config::site_shorewall':
startup => "0" # create shorewall ruleset but don't startup
}
shorewall::rule {
'incoming-ssh': source => 'all', destination => '$FW', action => 'SSH(ACCEPT)', order => 200;
'incoming-puppetmaster': source => 'all', destination => '$FW', action => 'Puppetmaster(ACCEPT)', order => 300;
'incoming-imap': source => 'all', destination => '$FW', action => 'IMAP(ACCEPT)', order => 300;
'incoming-smtp': source => 'all', destination => '$FW', action => 'SMTP(ACCEPT)', order => 300;
}
}
class config::site_shorewall($startup = '1') {
class{'shorewall':
startup => $startup
}
# If you want logging:
#shorewall::params {
# 'LOG': value => 'debug';
#}
shorewall::zone {'net':
type => 'ipv4';
}
shorewall::rule_section { 'NEW':
order => 100;
}
shorewall::interface { 'eth0':
zone => 'net',
options => 'tcpflags,nosmurfs';
}
shorewall::policy {
'fw-to-fw':
sourcezone => '$FW',
destinationzone => '$FW',
policy => 'ACCEPT',
order => 100;
'fw-to-net':
sourcezone => '$FW',
destinationzone => 'net',
policy => 'ACCEPT',
shloglevel => '$LOG',
order => 110;
'net-to-fw':
sourcezone => 'net',
destinationzone => '$FW',
policy => 'DROP',
shloglevel => '$LOG',
order => 120;
}
# default Rules : ICMP
shorewall::rule {
'allicmp-to-host':
source => 'all',
destination => '$FW',
order => 200,
action => 'AllowICMPs/(ACCEPT)';
}
}