| layout | title |
|---|---|
documentation |
ES800ZWE - ZWave |
{% include base.html %}
This describes the Z-Wave device ES800ZWE, manufactured by Essence Security with the thing type UID of essence_es800zwe_00_000.
The device is in the category of Battery, defining Batteries, Energy Storages.
The ES800ZWE supports routing. This allows the device to communicate using other routing enabled devices as intermediate routers. This device is also able to participate in the routing of data between other devices in the mesh network.
The Z-Wave Plus Extender incorporates third party Z-Wave devices into WeR@Home™, integrating home automation and control functions with the core WeR@Home™ system.
Features include:
- Single-element, compact Z-Wave Plus controller
- Allows Z-Wave devices to be added as seamlessly integrated elements in WeR@Home™.
- Enables support for Smart Devices such as:
- Light switches (on/off and dimmer)
- Thermostats
- Door locks
- Power strips
- Multi-colored (RGBW) LED bulbs
- Powered by the WeR@Home™ hub
- Simple and fast pairing process
If you have an existing third-party Z-Wave network, WeR@Home™ can join the network. WeR@Home™ enters "learn" mode on the existing network to automatically copy the existing network's Smart Home network structure. When you join a Z-Wave network, you have access to the Z-Wave devices supported by WeR@Home™. The Z-Wave Plus Extender is assigned one of the following roles depending on the third-party controller capabilities:
- Secondary (inclusion) - allowed to add or delete additional Z-Wave devices
- Secondary –not allowed to add or delete additional Z-Wave devices
To join an existing third-party Z-Wave network:
- Remove all Z-Wave devices from your WeR@Home™, except for your Z-Wave Plus Extender. Refer to 5.5 Removing a Z-Wave Device on page 14.
- In the WeR@Home™ app, tap "menu" The main menu appears.
- Tap "Devices". The Devicesscreen appears.
- Tap the gear icon for your Z-Wave Plus Extender. The Z-Wave Controller configuration screen appears.
- Put the primary controller of the existing network into Add mode, according to the controller’s user manual.
- Tap Join Existing Network. All Z-Wave devices are removed from WeR@Home™. WeR@Home™ copies the topology of the existing network and prompts you to enter the name for the existing network controller.
- Enter the name for the existing network controller and tap OK.
If your Z-Wave Plus Extender role is Secondary or Secondary (inclusion), you can remove your Z-Wave Plus Extender from the existing third-party network.
Caution: Removing the Z-Wave Plus Extender from the existing network, removes connection to all Z-Wave devices from the Z-Wave Plus Extender.
To remove your Z-Wave Plus Extender from the existing network:
- In the WeR@Home™ app, tap . The main menu appears.
- Tap Devices. The Devicesscreen appears.
- Tap the gear icon for your Z-Wave Plus Extender. The Z-Wave Controller configuration screen appears.
- Tap Role. The Role screen appears.
- Put the primary controller of the existing network into Remove mode, according to the controller’s user manual.
- Tap Exclude Network. A confirmation window appears.
- Tap OK. The third-party controller and its devices are removed.
The following table summarises the channels available for the ES800ZWE -:
| Channel Name | Channel ID | Channel Type | Category | Item Type |
|---|
The device has no configuration parameters defined.
Association groups allow the device to send unsolicited reports to the controller, or other devices in the network. Using association groups can allow you to eliminate polling, providing instant feedback of a device state change without unnecessary network traffic.
The ES800ZWE supports 1 association group.
The Lifeline association group reports device status to a hub and is not designed to control other devices directly. When using the Lineline group with a hub, in most cases, only the lifeline group will need to be configured and normally the hub will perform this automatically during the device initialisation.
Association group 1 supports 3 nodes.
| Command Class | Comment |
|---|---|
| COMMAND_CLASS_NO_OPERATION_V1 | |
| COMMAND_CLASS_BASIC_V1 | |
| COMMAND_CLASS_APPLICATION_STATUS_V1 | |
| COMMAND_CLASS_CRC_16_ENCAP_V1 | |
| COMMAND_CLASS_ASSOCIATION_GRP_INFO_V1 | |
| COMMAND_CLASS_DEVICE_RESET_LOCALLY_V1 | |
| COMMAND_CLASS_ZWAVEPLUS_INFO_V1 | |
| COMMAND_CLASS_MANUFACTURER_SPECIFIC_V1 | |
| COMMAND_CLASS_POWERLEVEL_V1 | |
| COMMAND_CLASS_ASSOCIATION_V2 | |
| COMMAND_CLASS_VERSION_V2 | |
| COMMAND_CLASS_SECURITY_V1 |
Did you spot an error in the above definition or want to improve the content? You can contribute to the database here.