MotionAssistant V1.1.62

MotionAssistant_1162_Release

Adapted for 7840U/7640U, adjusted TDP, GPU lock frequency, and GPU floating optimization.
2.Added customizable GPU floating frequency range with customizable upper and lower limits.
3.Adapted for WinMax2 7840U/7640U gyro and fan control interface.
4.Fixed the issue of not being able to obtain focus when calling out the interface.
5.Supported Turbo key for AOKZOE and OneXPlayer (not supported for OneXPlayer2).
Updated RyzenAdj version.
7.Fixed the axis alignment issue with ayaneo next gyro compatibility.
8.Added gyro input AR option to support AR glasses. Currently compatible with Nreal Air.
9.Added GPU floating support for 11th and 12th generation Intel processors.

Discord Message from JOJOMA
Original Download Link

BIOS V3.05 (6800u)

Changelogs

This BIOS fixes these issues that v3.04 solved:

• The touchscreen becomes unresponsive after a couple of hours of use.
• The USB C ports - Top and Bottom, stops functioning.

v3.05 also solves these issues that v3.04 introduced:

• The USB C ports do not output video.
• resolves some cases of the abnormal shutdown.

Potential Issues

• The boot sequence loops until it is forced to power down. See here

Disclaimer.

If your device is not experiencing any of these issues, please do not upgrade.
Some people are not experiencing the potential issues and are having an issue-free device so far.

Screen 60hz Fix

GPD Provided this file to flash onto the screen IC to fix the stutters, and frameskips of the screen.

BIOS 3.04 (6800u)

Changelogs

• GPD says that this file only fixes the issue of the touchscreen becoming unresponsive after a couple of hours of use.

• In response to user feedback that only the EC was successfully upgraded during the BIOS upgrade and the BIOS version remained at v3.0, we have re-uploaded a BIOS that forces an upgrade to version v3.04.

• This version primarily addresses the issue of GPD WIN 4 touchscreen malfunction during usage. If your device is not experiencing such issues, there is no need to upgrade.

Potential Issues

• EGPU does not work for some users.

Disclaimer.

If your device is not experiencing any of these issues, please do not upgrade.
Some people are not experiencing the potential issues and are having an issue-free device so far.

Direct download: GPD WIN 4 BIOS v3.04

Official download: GPD WIN 4 BIOS v3.04

Format the USB flash drive to the FAT32 format, and place the folders "EFI" and "WIN4_19_230421A", as well as the file "startup.nsh" in the root directory of the USB drive. To upgrade the BIOS, press Fn+F7 during startup to select the USB drive as the boot device.

During the upgrade process, please ensure that the machine is in a charging state. After the upgrade is successful, the machine will automatically shut down. The upgrade is equivalent to resetting the BIOS, so the restart may take longer and the screen may be black for a while. Please be patient!

BIOS 3.03 (6800u)

This bios release has a patch to the volume buttons to work on Linux as documented here by pastaq

Log changes:

• fixes the volume buttons issues but does not eleminates them
• Still has a TDP lock

Thanks to this message I found the BIOS to revert in case is necessary :)

BIOS 3.00 (6800u)

This BIOS files have the unlocked TDP, and fan controls included on the bios as mentioned here

3.00 has unlocked TDP and this is the main reason some people are downgrading.

Win4 Touch Calibration Drivers

This issue is documented in this Reddit post

After Installing these drivers the screen should be fixed.

Issues that this driver fixes:

• The touch input is not the same as the register input.
• TouchScreen is not working

These issues could have been caused because of the use of the DriverEasy app to update drivers. After a fresh installation, the screen is not inputting the right spot where it was touched. You press in an area but the input is registered in a different area of the screen.
Or It could be caused because you used an SD card or SSD from another device that has a portrait screen. see here

Discord message confirmation from Fulbringer of this working.

GPD Win4 Grip - 3D Files

Jojoma shared this files on discord for this Grid 3D model that he did.
LINK

This would be really cool to use with the Win4. This is a video that he shared of the printed grid, Pretty cool! View

Thank lixiaoyaoii / Jojoma for making this!
Source of files

GPD WinControls V1.10

WIN 4 grip customization tool, Fixed the issue that grip mapping key is by default in mouse mode.

source

Motion Assistant v1.1.60

MotionAssistant of WIN 4 is a gyro data simulation tool that can receive a variety of gyro data inputs and simulate different motion functions, which are used for game-assisted viewing angle aiming, as well as the native somatosensory of the simulator. The analog output methods are: mouse movement, Xbox grip joystick movement, DS4 grip native somatosensory.

source

I do not have any real changelogs at moment.