Skip to content

Latest commit

 

History

History
71 lines (52 loc) · 3.37 KB

README_VMWARE.md

File metadata and controls

71 lines (52 loc) · 3.37 KB
Raw

VMWare Fusion on OSX

The following instructions are used for OS X. You'll need docker-machine-parallels to create a virtual machine (vm) with tiny core linux for running docker images. After that, you may start the vm you created for VMWare Fusion or Parallels Desktop and run a docker container inside this vm. If you're going to use the android docker of emulator with x86 processor, setup this vm for nested virtualization and kvm support before you run a docker container.

  1. Install docker-machine-parallels via Homebrew:

    $ brew install docker-machine-parallels

  2. Create a virtual machine for running docker images based on the virtual machine tool you use

    2.1. Create a virtual machine of VMWare Fusion

    $ docker-machine create --driver=vmwarefusion vmware-dev

    2.2. Create a virtual machine of Parallels Desktop

    $ docker-machine create --driver=parallels prl-dev

    This utility docker-machine-parallels will fetch boot2docker.iso to create a vm of VMWare fusion or Parallels Desktop. When the vm is created, you'll see it's booted with VMWare fusion or Parallels Desktop where the network of vm is set to NAT and one IP is assigned. You'll be able to connect to vnc service inside the docker image through that IP. Say it's 10.211.55.3 and we'll use it later.

  3. Setup the virtual machine for nested virtualization support

    3.1. Shutdown the vm by running the command below in the boot2docker vm before you setup it.

    # shutdown -h now

    If you use VMWare Fusion, go to menu bar > Vitual Machine > Settings > Processors and Memory, expand Advanced options, and select Enable hypervisor applications in this virtual machine.

    Enable nested virtualization for VMWare Fusion

    If you use Parallels Desktop, open settings screen of that vm and go to CPU & Memory under hardware tab, expand Advanced settings and select Enable nested virtualization.

    Enable nested virtualization for Parallels Desktop

  4. Enable kvm inside virtual machine 4.1. Run as an account other than root to install kvm packages using tce-load.

    # su docker
$ tce-load -wi kvm

    4.2. Run as root to load kvm module after kvm packages install.

    $ sudo modprobe kvm_intel

    4.3. Check if the kvm device is loaded.

    $ ls /dev/kvm

    4.4. Check if your CPU supports hardware virtualization now

    $ egrep -c '(vmx|svm)' /proc/cpuinfo

    If 0 it means that your CPU doesn't support hardware virtualization. If 1 or more it does - but you still need to make sure that virtualization is enabled in the BIOS.

  5. You may now run a docker container 5.1. Let's run a docker image for an emulator with x86 processor.

    docker run --privileged -d -p 6080:6080 -p 5554:5554 -p 5555:5555 -e DEVICE="Samsung Galaxy S6" --name android-container butomo1989/docker-android-x86-8.1

    When the services inside this docker container are running, connect to http://10.211.55.3:6080/vnc.html (the IP we got when the docker machine was created) and login. The emulator with x86 processor should be running on screen.