From 09883e7380e7f6b1ffcfec216d18ff0018b00a99 Mon Sep 17 00:00:00 2001
From: David AUFFRAY <31964077+Davidffry@users.noreply.github.com>
Date: Tue, 19 Sep 2023 09:39:49 +0200
Subject: [PATCH] Fix typo

Fix typo
---
 README.md | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/README.md b/README.md
index dd713d74d..85caf66dc 100644
--- a/README.md
+++ b/README.md
@@ -63,14 +63,14 @@ FireBeetle 2 ESP32-E Microcontroller
 
 - Why the FireBeetle 2 ESP32-E
 
-  - Drobot's FireBeetle ESP32 models are optimized for low-power consumption (https://diyi0t.com/reduce-the-esp32-power-consumption/). The Drobot's FireBeetle 2 ESP32-E variant offers USB-C, but older versions of the board with Mirco-USB would work fine too.
+  - Drobot's FireBeetle ESP32 models are optimized for low-power consumption (https://diyi0t.com/reduce-the-esp32-power-consumption/). The Drobot's FireBeetle 2 ESP32-E variant offers USB-C, but older versions of the board with Micro-USB would work fine too.
 
-  - Firebeelte ESP32 models include onboard charging circuitry for a 3.7v lithium-ion(LiPo) battery.
+  - Firebeetle ESP32 models include onboard charging circuitry for a 3.7v lithium-ion(LiPo) battery.
 
   - FireBeetle ESP32 models include onboard circuitry to monitor battery voltage of a battery connected to its JST-PH2.0 connector.
 
 
-- https://www.dfrobot.com/product-2195.html
+- [https://www.dfrobot.com/product-2195.html](https://www.dfrobot.com/product-2195.html)
 
 
 BME280 - Pressure, Temperature, and Humidity Sensor
@@ -122,7 +122,7 @@ IMPORTANT: The E-Paper Driver Hat has two physical switches that MUST be set cor
 
 Cut the low power pad for even longer battery life.
 
-- From https://wiki.dfrobot.com/FireBeetle_Board_ESP32_E_SKU_DFR0654
+- From [https://wiki.dfrobot.com/FireBeetle_Board_ESP32_E_SKU_DFR0654](https://wiki.dfrobot.com/FireBeetle_Board_ESP32_E_SKU_DFR0654)
 
   > Low Power Pad: This pad is specially designed for low power consumption. It is connected by default. You can cut off the thin wire in the middle with a knife to disconnect it. After disconnection, the static power consumption can be reduced by 500 μA. The power consumption can be reduced to 13 μA after controlling the maincontroller enter the sleep mode through the program. Note: when the pad is disconnected, you can only drive RGB LED light via the USB Power supply.