From 708d4a2c19b22f6e10f1fdbb90938224cbb96e6f Mon Sep 17 00:00:00 2001
From: Nikhil Malik <nikhil.malik@netlox.io>
Date: Mon, 9 Sep 2024 17:37:49 +0900
Subject: [PATCH 1/5] gh-87 : sctpmh with seagull test suite cicd added

---
 .github/workflows/sctpmh-seagull-sanity.yml   |  36 ++
 cicd/common.sh                                |   2 +-
 cicd/docker-k3s-calico/common.sh              |   2 +-
 cicd/docker-k3s-cilium/common.sh              |   2 +-
 cicd/k0s-incluster/common.sh                  |   2 +-
 cicd/microk8s-incluster/common.sh             |   4 +-
 .../.vagrant/bundler/global.sol               |   1 +
 .../.vagrant/rgloader/loader.rb               |   9 +
 cicd/sctpmh-seagull/Vagrantfile               |  27 +
 cicd/sctpmh-seagull/bastion.sh                |  12 +
 cicd/sctpmh-seagull/check_ha.sh               | 134 ++++
 cicd/sctpmh-seagull/common.sh                 | 572 ++++++++++++++++++
 cicd/sctpmh-seagull/config.sh                 |  23 +
 cicd/sctpmh-seagull/rmconfig.sh               |   3 +
 cicd/sctpmh-seagull/rmsetup.sh                |  35 ++
 cicd/sctpmh-seagull/setup.sh                  | 121 ++++
 cicd/sctpmh-seagull/validation.sh             |  56 ++
 cicd/sctpmh-seagull/validation1.sh            |  67 ++
 cicd/sctpmh-seagull/validation2.sh            | 114 ++++
 cicd/sctpmh-seagull/validation3.sh            | 171 ++++++
 cicd/sctpmh-seagull/validation4.sh            | 172 ++++++
 cicd/sctpmh-seagull/validation5.sh            | 168 +++++
 cicd/sctpmh-seagull/validation6.sh            | 175 ++++++
 23 files changed, 1902 insertions(+), 6 deletions(-)
 create mode 100644 .github/workflows/sctpmh-seagull-sanity.yml
 create mode 100644 cicd/sctpmh-seagull/.vagrant/bundler/global.sol
 create mode 100644 cicd/sctpmh-seagull/.vagrant/rgloader/loader.rb
 create mode 100644 cicd/sctpmh-seagull/Vagrantfile
 create mode 100644 cicd/sctpmh-seagull/bastion.sh
 create mode 100644 cicd/sctpmh-seagull/check_ha.sh
 create mode 100644 cicd/sctpmh-seagull/common.sh
 create mode 100755 cicd/sctpmh-seagull/config.sh
 create mode 100755 cicd/sctpmh-seagull/rmconfig.sh
 create mode 100755 cicd/sctpmh-seagull/rmsetup.sh
 create mode 100755 cicd/sctpmh-seagull/setup.sh
 create mode 100755 cicd/sctpmh-seagull/validation.sh
 create mode 100755 cicd/sctpmh-seagull/validation1.sh
 create mode 100755 cicd/sctpmh-seagull/validation2.sh
 create mode 100755 cicd/sctpmh-seagull/validation3.sh
 create mode 100755 cicd/sctpmh-seagull/validation4.sh
 create mode 100755 cicd/sctpmh-seagull/validation5.sh
 create mode 100755 cicd/sctpmh-seagull/validation6.sh

diff --git a/.github/workflows/sctpmh-seagull-sanity.yml b/.github/workflows/sctpmh-seagull-sanity.yml
new file mode 100644
index 000000000..4e49da07a
--- /dev/null
+++ b/.github/workflows/sctpmh-seagull-sanity.yml
@@ -0,0 +1,36 @@
+name: SCTP-MH-LB-Seagull-Sanity-CI
+on:
+ # schedule:
+ # Runs "At 11:00 UTC every day-of-week"
+ #- cron: '0 11 * * *'
+ workflow_dispatch:
+    inputs:
+      testName:
+        description: 'Test Run-Name'     
+        required: true
+        default: 'sctpmh-seagull-sanity'
+jobs:
+  test-runner:
+    name: k8s-calico-incluster-sanity
+    runs-on: [self-hosted, large]
+    if: github.repository == 'loxilb-io/loxilb' 
+          &&  github.event.inputs.tagName == ''
+    steps:
+    - name: Checkout
+      uses: actions/checkout@v2
+      with:
+          submodules: recursive
+
+    - name: Run the test
+      run: |
+         cd cicd/sctpmh-seagull
+         ./config.sh
+         ./validation.sh
+         cd -
+         
+    - name: Clean test-bed
+      if: success() || failure()
+      run: |
+        cd cicd/sctpmh-seagull || true
+        ./rmconfig.sh
+        cd -
diff --git a/cicd/common.sh b/cicd/common.sh
index 619a1c36b..b96e2271f 100644
--- a/cicd/common.sh
+++ b/cicd/common.sh
@@ -561,7 +561,7 @@ function create_lb_rule() {
     return
   fi
 
-  hook=$($dexec llb1 tc filter show dev eth0 ingress | grep tc_packet_func)
+  hook=$($dexec $1 tc filter show dev eth0 ingress | grep tc_packet_func)
   if [[ $hook != *"tc_packet_func"* ]]; then
     echo "ERROR : No hook point found";
     exit 1
diff --git a/cicd/docker-k3s-calico/common.sh b/cicd/docker-k3s-calico/common.sh
index ea1196029..1931a2309 100644
--- a/cicd/docker-k3s-calico/common.sh
+++ b/cicd/docker-k3s-calico/common.sh
@@ -536,7 +536,7 @@ function create_lb_rule() {
   echo "$1: loxicmd create lb ${args[*]}"
   $dexec $1 loxicmd create lb ${args[*]}
 
-  hook=$($dexec llb1 tc filter show dev eth0 ingress | grep tc_packet_func)
+  hook=$($dexec $1 tc filter show dev eth0 ingress | grep tc_packet_func)
   if [[ $hook != *"tc_packet_func"* ]]; then
     echo "ERROR : No hook point found";
     exit 1
diff --git a/cicd/docker-k3s-cilium/common.sh b/cicd/docker-k3s-cilium/common.sh
index ea1196029..1931a2309 100644
--- a/cicd/docker-k3s-cilium/common.sh
+++ b/cicd/docker-k3s-cilium/common.sh
@@ -536,7 +536,7 @@ function create_lb_rule() {
   echo "$1: loxicmd create lb ${args[*]}"
   $dexec $1 loxicmd create lb ${args[*]}
 
-  hook=$($dexec llb1 tc filter show dev eth0 ingress | grep tc_packet_func)
+  hook=$($dexec $1 tc filter show dev eth0 ingress | grep tc_packet_func)
   if [[ $hook != *"tc_packet_func"* ]]; then
     echo "ERROR : No hook point found";
     exit 1
diff --git a/cicd/k0s-incluster/common.sh b/cicd/k0s-incluster/common.sh
index ea1196029..1931a2309 100755
--- a/cicd/k0s-incluster/common.sh
+++ b/cicd/k0s-incluster/common.sh
@@ -536,7 +536,7 @@ function create_lb_rule() {
   echo "$1: loxicmd create lb ${args[*]}"
   $dexec $1 loxicmd create lb ${args[*]}
 
-  hook=$($dexec llb1 tc filter show dev eth0 ingress | grep tc_packet_func)
+  hook=$($dexec $1 tc filter show dev eth0 ingress | grep tc_packet_func)
   if [[ $hook != *"tc_packet_func"* ]]; then
     echo "ERROR : No hook point found";
     exit 1
diff --git a/cicd/microk8s-incluster/common.sh b/cicd/microk8s-incluster/common.sh
index c65963cd2..1931a2309 100755
--- a/cicd/microk8s-incluster/common.sh
+++ b/cicd/microk8s-incluster/common.sh
@@ -536,8 +536,8 @@ function create_lb_rule() {
   echo "$1: loxicmd create lb ${args[*]}"
   $dexec $1 loxicmd create lb ${args[*]}
 
-  hook=$($dexec llb1 tc filter show dev eth0 ingress | grep tc_packet_hook)
-  if [[ $hook != *"tc_packet_hook"* ]]; then
+  hook=$($dexec $1 tc filter show dev eth0 ingress | grep tc_packet_func)
+  if [[ $hook != *"tc_packet_func"* ]]; then
     echo "ERROR : No hook point found";
     exit 1
   fi
diff --git a/cicd/sctpmh-seagull/.vagrant/bundler/global.sol b/cicd/sctpmh-seagull/.vagrant/bundler/global.sol
new file mode 100644
index 000000000..072d3ec90
--- /dev/null
+++ b/cicd/sctpmh-seagull/.vagrant/bundler/global.sol
@@ -0,0 +1 @@
+{"dependencies":[["vagrant-disksize",["= 0.1.3"]],["net-ssh",[">= 2.6.5","< 8.0.0"]],["net-scp",[">= 1.1"]],["log4r",["~> 1.1"]],["vagrant-scp",["= 0.5.9"]]],"checksum":"d41cdc087dc2595e62da764647bfcacc91965875ce15159c44cdee684a184f69","vagrant_version":"2.3.7"}
\ No newline at end of file
diff --git a/cicd/sctpmh-seagull/.vagrant/rgloader/loader.rb b/cicd/sctpmh-seagull/.vagrant/rgloader/loader.rb
new file mode 100644
index 000000000..c3c05b095
--- /dev/null
+++ b/cicd/sctpmh-seagull/.vagrant/rgloader/loader.rb
@@ -0,0 +1,9 @@
+# This file loads the proper rgloader/loader.rb file that comes packaged
+# with Vagrant so that encoded files can properly run with Vagrant.
+
+if ENV["VAGRANT_INSTALLER_EMBEDDED_DIR"]
+  require File.expand_path(
+    "rgloader/loader", ENV["VAGRANT_INSTALLER_EMBEDDED_DIR"])
+else
+  raise "Encoded files can't be read outside of the Vagrant installer."
+end
diff --git a/cicd/sctpmh-seagull/Vagrantfile b/cicd/sctpmh-seagull/Vagrantfile
new file mode 100644
index 000000000..f1d438ff8
--- /dev/null
+++ b/cicd/sctpmh-seagull/Vagrantfile
@@ -0,0 +1,27 @@
+# -*- mode: ruby -*-
+# vi: set ft=ruby :
+
+#box_name = (ENV['VAGRANT_BOX'] || "ubuntu/focal64")
+box_name = (ENV['VAGRANT_BOX'] || "sysnet4admin/Ubuntu-k8s")
+box_version = "0.7.1"
+Vagrant.configure("2") do |config|
+  config.vm.box = "#{box_name}"
+  config.vm.box_version = "#{box_version}"
+
+  if Vagrant.has_plugin?("vagrant-vbguest")
+    config.vbguest.auto_update = false
+  end
+
+  config.vm.define "bastion" do |bastion|
+    bastion.vm.hostname = 'bastion'
+    #bastion.vm.network :private_network, ip: "4.0.5.3", :netmask => "255.255.255.0"
+    bastion.vm.network :private_network, ip: "4.0.4.3", :netmask => "255.255.255.0"
+    bastion.vm.provision :shell, :path => "bastion.sh"
+    bastion.vm.provider :virtualbox do |vbox|
+        vbox.customize ["modifyvm", :id, "--memory", 8196]
+        vbox.customize ["modifyvm", :id, "--cpus", 12]
+        #vbox.customize ["modifyvm", :id, "--nicpromisc2", "allow-all"]
+        #vbox.customize ["modifyvm", :id, "--nicpromisc3", "allow-all"]
+    end
+  end
+end
diff --git a/cicd/sctpmh-seagull/bastion.sh b/cicd/sctpmh-seagull/bastion.sh
new file mode 100644
index 000000000..dc9a4a3a2
--- /dev/null
+++ b/cicd/sctpmh-seagull/bastion.sh
@@ -0,0 +1,12 @@
+apt-get update
+apt-get install -y software-properties-common curl wget lksctp-tools jq
+curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
+add-apt-repository -y "deb [arch=amd64] https://download.docker.com/linux/ubuntu  $(lsb_release -cs)  stable"
+apt-get update
+apt-get install -y docker-ce
+echo "blacklist sctp" >>  /etc/modprobe.d/blacklist.conf
+echo "install sctp /bin/false" >>  /etc/modprobe.d/blacklist.conf
+
+echo "Rebooting Now!"
+reboot
+"
diff --git a/cicd/sctpmh-seagull/check_ha.sh b/cicd/sctpmh-seagull/check_ha.sh
new file mode 100644
index 000000000..f06e85953
--- /dev/null
+++ b/cicd/sctpmh-seagull/check_ha.sh
@@ -0,0 +1,134 @@
+#!/bin/bash
+
+master="llb1"
+backup="llb2"
+
+function check_ha() {
+    while : ; do
+        status1=$($hexec llb1 curl -sX 'GET' 'http://0.0.0.0:11111/netlox/v1/config/cistate/all' -H 'accept: application/json' | jq -r '.Attr[0].state')
+        status2=$($hexec llb2 curl -sX 'GET' 'http://0.0.0.0:11111/netlox/v1/config/cistate/all' -H 'accept: application/json' | jq -r '.Attr[0].state')
+        count=0
+        if [[ $status1 == "MASTER" && $status2 == "BACKUP" ]];
+        then
+            master="llb1"
+            backup="llb2"
+            break
+        elif [[ $status2 == "MASTER" && $status1 == "BACKUP" ]]; 
+        then
+            master="llb2"
+            backup="llb1"
+            break
+        else
+            count=$(( $count + 1 ))
+            if [[ $count -ge 20 ]]; then
+                echo "KA llb1-$status1, llb2-$status2 [NOK]" >&2
+                exit 1;
+            fi
+            sleep 5
+        fi
+    done
+}
+
+function checkSync() {
+    count=1
+    sync=0
+    while [[ $count -le 5 ]] ; do
+        echo -e "\nStatus at MASTER:$master\n" >&2
+        #$dexec $master loxicmd get ct | grep est >&2
+        ct=`$dexec $master loxicmd get ct | grep est`
+        echo "${ct//'\n'/$'\n'}" >&2
+
+        echo -e "\nStatus at BACKUP:$backup\n" >&2
+        ct=`$dexec $backup loxicmd get ct | grep est`
+        echo "${ct//'\n'/$'\n'}" >&2
+
+        nres1=$($hexec $master curl -sX 'GET' 'http://0.0.0.0:11111/netlox/v1/config/conntrack/all' -H 'accept: application/json' | grep -ow "\"conntrackState\":\"est\"" | wc -l)
+        nres2=$($hexec $backup curl -sX 'GET' 'http://0.0.0.0:11111/netlox/v1/config/conntrack/all' -H 'accept: application/json' | grep -ow "\"conntrackState\":\"est\"" | wc -l)
+
+        if [[ $nres1 == 0 ]]; then
+            echo -e "No active connections in Master:$master. Exiting!" >&2
+            return 2
+        fi
+
+        if [[ $nres1 == $nres2 && $nres1 != 0 ]]; then
+            echo -e "\nConnections sync successful!!!\n" >&2
+            sync=1
+            break;
+        fi
+        echo -e "\nConnections sync pending.. Let's wait a little more..\n" >&2
+        count=$(( $count + 1 ))
+        sleep 2
+    done
+
+    if [[ $sync == 0 ]]; then
+        echo -e "\nConnection Sync failed\n" >&2
+        return 0
+    fi
+    echo "$sync"
+}
+
+function restart_mloxilb() {
+    if [[ $master == "llb1" ]]; then
+        pat="cluster=172.17.0.3"
+        copts=" --cluster=172.17.0.3"
+        self=" --self=0"
+        ka=" --ka=172.17.0.3:172.17.0.2"
+    else
+        pat="cluster=172.17.0.2"
+        copts=" --cluster=172.17.0.2"
+        self=" --self=1"
+        ka=" --ka=172.17.0.2:172.17.0.3"
+    fi
+    echo "Restarting MASTER: $master"
+    pid=$(docker exec -i $master ps -aef | grep $pat | xargs | cut -d ' ' -f 2)
+    echo "Killing $pid" >&2
+    docker exec -dt $master kill -9 $pid
+    docker exec -dt $master ip link del llb0
+    docker exec -dt $master nohup /root/loxilb-io/loxilb/loxilb $copts $self $ka > /dev/null &
+    pid=$(docker exec -i $master ps -aef | grep $pat | xargs | cut -d ' ' -f 2)
+    echo "New loxilb pid: $pid" >&2
+}
+
+function restart_loxilbs() {
+    if [[ $master == "llb1" ]]; then
+        mpat="cluster=172.17.0.3"
+        mcopts=" --cluster=172.17.0.3"
+        mself=" --self=0"
+        mka=" --ka=172.17.0.3:172.17.0.2"
+        
+        bpat="cluster=172.17.0.2"
+        bcopts=" --cluster=172.17.0.2"
+        bself=" --self=1"
+        bka=" --ka=172.17.0.2:172.17.0.3"
+    else
+        mpat="cluster=172.17.0.2"
+        mcopts=" --cluster=172.17.0.2"
+        mself=" --self=1"
+        mka=" --ka=172.17.0.2:172.17.0.3"
+        
+        bpat="cluster=172.17.0.3"
+        bcopts=" --cluster=172.17.0.3"
+        bself=" --self=0"
+        bka=" --ka=172.17.0.3:172.17.0.2"
+    fi
+    echo "Restarting $master"
+    pid=$(docker exec -i $master ps -aef | grep $mpat | xargs | cut -d ' ' -f 2)
+    echo "Killing $mpid" >&2
+    docker exec -dt $master kill -9 $pid
+    docker exec -dt $master ip link del llb0
+    docker exec -dt $master nohup /root/loxilb-io/loxilb/loxilb $mcopts $mself $mka > /dev/null &
+    pid=$(docker exec -i $master ps -aef | grep $mpat | xargs | cut -d ' ' -f 2)
+    echo "New loxilb pid: $pid" >&2
+
+    echo "Restarting $backup"
+    pid=$(docker exec -i $backup ps -aef | grep $bpat | xargs | cut -d ' ' -f 2)
+    echo "Killing $pid" >&2
+    docker exec -dt $backup kill -9 $pid
+    docker exec -dt $backup ip link del llb0
+    docker exec -dt $backup nohup /root/loxilb-io/loxilb/loxilb $bcopts $bself $bka > /dev/null &
+    pid=$(docker exec -i $backup ps -aef | grep $bpat | xargs | cut -d ' ' -f 2)
+    echo "New loxilb pid: $pid" >&2
+
+}
+
+
diff --git a/cicd/sctpmh-seagull/common.sh b/cicd/sctpmh-seagull/common.sh
new file mode 100644
index 000000000..c5a28ac5f
--- /dev/null
+++ b/cicd/sctpmh-seagull/common.sh
@@ -0,0 +1,572 @@
+#!/bin/bash
+
+if [[ "$1" == "init" ]]; then
+  pull_dockers
+fi
+
+hn="netns"
+pid=""
+vrn="/var/run/"
+hexec="sudo ip netns exec "
+dexec="sudo docker exec -i "
+hns="sudo ip netns "
+hexist="$vrn$hn"
+lxdocker="ghcr.io/loxilb-io/loxilb:latest"
+hostdocker="ghcr.io/loxilb-io/nettest:latest"
+cluster_opts=""
+extra_opts=""
+ka_opts=""
+#var=$(lsb_release -r | cut -f2)
+#if [[ $var == *"22.04"* ]];then
+#  lxdocker="ghcr.io/loxilb-io/loxilb:latestu22"
+#fi
+
+loxilbs=()
+
+## Given a docker name(arg1), return its pid
+get_docker_pid() {
+  id=`docker ps -f name=$1| grep -w $1 | cut  -d " "  -f 1 | grep -iv  "CONTAINER"`
+  pid=`docker inspect -f '{{.State.Pid}}' $id`
+}
+
+## Pull all necessary dockers for testbed
+pull_dockers() {
+  ## loxilb docker
+  docker pull $lxdocker
+  ## Host docker 
+  docker pull docker pull $hostdocker
+  ## BGP host docker
+  docker pull ewindisch/quagga
+}
+
+## Creates a docker host
+## arg1 - "loxilb"|"host"
+## arg2 - instance-name
+spawn_docker_host() {
+  POSITIONAL_ARGS=()
+  local bpath
+  local kpath
+  local ka
+  local bgp
+  while [[ $# -gt 0 ]]; do
+  case "$1" in
+    -t | --dock-type )
+      dtype="$2"
+      shift 2
+      ;;
+    -d | --dock-name )
+      dname="$2"
+      shift 2
+      ;;
+    -b | --with-bgp )
+      if [[ "$2" == "yes" ]]; then
+          bgp=$2
+      fi
+      shift 2
+      ;;
+    -c | --bgp-config )
+      bpath="$2"
+      bgp="yes"
+      shift 2
+      ;;
+    -k | --with-ka )
+      ka="in"
+      if [[ "$2" == "out" ]]; then
+          ka=$2
+      fi
+      shift 2
+      ;;
+    -d | --ka-config )
+      kpath="$2"
+      if [[ -z ${ka+x} ]]; then
+        ka="in"
+      fi
+      shift 2
+      ;;
+    -e | --extra-args)
+      extra_opts="$2"
+      shift 2
+      ;;
+    -*|--*)
+      echo "Unknown option $1"
+      exit
+      ;;
+  esac
+  done  
+  set -- "${POSITIONAL_ARGS[@]}" # restore positional parameters
+  echo "Spawning $dname($dtype)" >&2 
+  if [[ "$dtype" == "loxilb" ]]; then
+    loxilbs+=("$dname")
+    if [[ "$pick_config" == "yes" ]]; then
+        echo "$dname will pick config from $(pwd)/${dname}_config"
+        loxilb_config="-v $(pwd)/${dname}_config:/etc/loxilb/"
+    fi
+    if [[ "$bgp" == "yes" ]]; then
+      bgp_opts="-b"
+      if [[ ! -z "$bpath" ]]; then
+        bgp_conf="-v $bpath:/etc/gobgp/"
+      fi
+    fi
+    if [[ ! -z ${ka+x} ]]; then
+      sudo mkdir -p /etc/shared/$dname/
+      docker run -u root --cap-add SYS_ADMIN   --restart unless-stopped --privileged -dt --pid=host --cgroupns=host --entrypoint /bin/bash $bgp_conf -v /dev/log:/dev/log -v /etc/shared/$dname:/etc/shared $loxilb_config --name $dname $lxdocker
+      get_llb_peerIP $dname
+      docker exec -dt $dname /root/loxilb-io/loxilb/loxilb $bgp_opts $cluster_opts $ka_opts $extra_opts
+    else
+      docker run -u root --cap-add SYS_ADMIN   --restart unless-stopped --privileged -dt --pid=host --cgroupns=host --entrypoint /bin/bash $bgp_conf -v /dev/log:/dev/log $loxilb_config --name $dname $lxdocker $bgp_opts
+      docker exec -dt $dname /root/loxilb-io/loxilb/loxilb $bgp_opts $cluster_opts $extra_opts
+    fi
+  elif [[ "$dtype" == "host" ]]; then
+    if [[ ! -z "$bpath" ]]; then
+      bgp_conf="--volume $bpath:/etc/quagga" 
+    fi
+    if [[ "$bgp" == "yes" || ! -z "$bpath" ]]; then
+      docker run -u root --cap-add SYS_ADMIN  --restart unless-stopped --privileged -dit $bgp_conf --name $dname ewindisch/quagga
+    else
+      docker run -u root --cap-add SYS_ADMIN -dit --name $dname $hostdocker
+    fi
+  elif [[ "$dtype" == "seahost" ]]; then
+      docker run -u root --cap-add SYS_ADMIN -i -t --rm --detach --entrypoint /bin/bash --name $dname  ghcr.io/loxilb-io/seagull:ubuntu1804
+      docker exec -dit $dname ifconfig eth0 0
+  fi
+
+  pid=""
+
+  sleep 2
+  get_docker_pid $dname
+  echo $pid
+  if [ ! -f "$hexist/$dname" -a "$pid" != "" ]; then
+    sudo mkdir -p /var/run/netns  
+    sudo touch /var/run/netns/$dname
+    #echo "sudo mount -o bind /proc/$pid/ns/net /var/run/netns/$2"
+    sudo mount -o bind /proc/$pid/ns/net /var/run/netns/$dname
+  fi
+
+  $hexec $dname ifconfig lo up
+  $hexec $dname sysctl net.ipv6.conf.all.disable_ipv6=1 2>&1 >> /dev/null
+  #$hexec $dname sysctl net.ipv4.conf.all.arp_accept=1 2>&1 >> /dev/null
+  if [ -f /proc/sys/net/ipv4/conf/eth0/arp_ignore ]; then
+    $hexec $dname sysctl net.ipv4.conf.eth0.arp_ignore=2 2>&1 >> /dev/null
+  fi
+}
+
+## Get loxilb peer docker IP
+get_llb_peerIP() {
+   if [[ "$1" == "llb1" ]]; then
+      llb1IP=$(docker inspect --format='{{.NetworkSettings.IPAddress}}' llb1)
+      if [[ "lb$llb1IP" == "lb" ]];then
+        llb2IP="172.17.0.3"
+      else
+        read A B C D <<<"${llb1IP//./ }"
+        llb2IP="$A.$B.$C.$((D+1))"
+      fi
+      cluster_opts=" --cluster=$llb2IP --self=0"
+      ka_opts=" --ka=$llb2IP:$llb1IP"
+    elif [[ "$1" == "llb2" ]]; then
+      llb2IP=$(docker inspect --format='{{.NetworkSettings.IPAddress}}' llb2)
+      if [[ "lb$llb2IP" == "lb" ]];then
+        llb1IP="172.17.0.2"
+      else
+        read A B C D <<<"${llb2IP//./ }"
+        llb1IP="$A.$B.$C.$((D-1))"
+      fi
+      cluster_opts=" --cluster=$llb1IP --self=1"
+      ka_opts=" --ka=$llb1IP:$llb2IP"
+    fi
+}
+
+## Deletes a docker host
+## arg1 - hostname 
+delete_docker_host() {
+  dcmd="kill"
+  if [[ $1 == "llb"* ]] || [[ $1 == "loxilb"* ]]; then
+    dcmd="stop"
+  fi
+  if docker $dcmd $1 2>&1 >> /dev/null
+  then
+    hd="true"
+    ka=`docker ps -f name=ka_$1| grep -w ka_$1 | cut  -d " "  -f 1 | grep -iv  "CONTAINER"`
+    loxilbs=( "${loxilbs[@]/$1}" )
+    if [ "$ka" != "" ]; then
+      docker kill ka_$1 2>&1 >> /dev/null
+      docker rm ka_$1 2>&1 >> /dev/null
+    fi
+  fi
+  if [ -f "$hexist/$1" ]; then
+    $hns del $1
+    sudo rm -fr "$hexist/$1" 2>&1 >> /dev/null
+  fi
+  docker rm $1 2>&1 >> /dev/null || true
+}
+
+## Connects two docker hosts
+## arg1 - hostname1 
+## arg2 - hostname2 
+## arg3 - mtu
+connect_docker_hosts() {
+  link1=e$1$2
+  link2=e$2$1
+
+  mtu="9000"
+  if [[ $# -gt 2 ]]; then
+    mtu=$3
+  fi
+
+  #echo $link1 $link2
+  sudo ip -n $1 link add $link1 type veth peer name $link2 netns $2
+  sudo ip -n $1 link set $link1 mtu $mtu up
+  sudo ip -n $2 link set $link2 mtu $mtu up
+}
+
+## arg1 - hostname1 
+## arg2 - hostname2 
+disconnect_docker_hosts() {
+  link1=e$1$2
+  link2=e$2$1
+  #  echo $link1 $link2
+  if [ -f "$hexist/$1" ]; then
+    ifexist1=`sudo ip -n $1 link show $link1 | grep -w $link1`
+    if [ "chk$ifexist1" != "chk" ]; then
+      sudo ip -n $1 link set $link1 down 2>&1 >> /dev/null
+      sudo ip -n $1 link del $link1 2>&1 >> /dev/null
+    fi
+  fi
+
+  if [ -f "$hexist/$2" ]; then
+    ifexist2=`sudo ip -n $2 link show | grep -w $link2`
+    if [ "chk$ifexist2" != "chk" ]; then
+      sudo ip -n $2 link set $link2 down 2>&1 >> /dev/null
+      sudo ip -n $2 link del $link2 2>&1 >> /dev/null
+    fi
+  fi
+}
+
+## arg1 - hostname1 
+## arg2 - hostname2 
+## arg3 - ip_addr
+## arg4 - gw
+config_docker_host() {
+  POSITIONAL_ARGS=()
+  while [[ $# -gt 0 ]]; do
+    case $1 in
+        --host1)
+            local h1="$2"
+            shift
+            shift
+            ;;
+        --host2)
+            local h2="$2"
+            shift
+            shift
+            ;;
+        --ptype)
+            local ptype="$2"
+            shift
+            shift
+            ;;
+        --id)
+            local xid="$2"
+            shift
+            shift
+            ;;
+        --addr)
+            local addr="$2"
+            shift
+            shift
+            ;;
+        --gw)
+            local gw="$2"
+            shift
+            shift
+            ;;
+        -*|--*)
+            echo "Unknown option $1"
+            exit 1
+            ;;
+        *)
+            POSITIONAL_ARGS+=("$1") # save positional arg
+            shift # past argument
+            ;;
+    esac
+  done
+  set -- "${POSITIONAL_ARGS[@]}" # restore positional parameters
+
+  link1=e$h1$h2
+  link2=e$h2$h1
+  #echo "$h1:$link1->$h2:$link2"
+
+  #if [[ -n "${loxilbs[$h1]}" && "$pick_config" == "yes" ]]; then
+  if [[ ${loxilbs[*]} =~ (^|[[:space:]])$h1($|[[:space:]]) && "$pick_config" == "yes" ]]; then
+    return
+  fi
+
+  if [[ "$ptype" == "phy" ]]; then
+    sudo ip -n $h1 addr add $addr dev $link1
+  elif [[ "$ptype" == "vlan" ]]; then
+    sudo ip -n $h1 addr add $addr dev vlan$xid
+  elif [[ "$ptype" == "vxlan" ]]; then
+    sudo ip -n $h1 addr add $addr dev vxlan$xid
+  elif [[ "$ptype" == "trunk" ]]; then
+    trunk="bond$xid"
+    sudo ip -n $h1 link set $link1 down
+    sudo ip -n $h1 link add $trunk type bond
+    sudo ip -n $h1 link set $link1 master $trunk
+    sudo ip -n $h1 link set $link1 up
+    sudo ip -n $h1 link set $trunk up
+
+    sudo ip -n $h2 link set $link2 down
+    sudo ip -n $h2 link add $trunk type bond
+    sudo ip -n $h2 link set $link2 master $trunk
+    sudo ip -n $h2 link set $link2 up
+    sudo ip -n $h2 link set $trunk up
+
+    sudo ip -n $h1 addr add $addr dev bond$xid
+    if [[ "$gw" != "" ]]; then
+      sudo ip -n $h2 addr add $gw/24 dev bond$xid
+      sudo ip -n $h1 route add default via $gw proto static
+    fi
+  else
+    echo "Check port-type"
+  fi
+
+  if [[ "$gw" != "" ]]; then
+    sudo ip -n $h1 route del default 2>&1 >> /dev/null
+    sudo ip -n $h1 route add default via $gw
+  fi
+}
+
+## arg1 - hostname1 
+## arg2 - hostname2 
+## arg3 - vlan
+## arg4 - tagged/untagged
+create_docker_host_vlan() {
+  local addr=""
+  POSITIONAL_ARGS=()
+  while [[ $# -gt 0 ]]; do
+    case $1 in
+        --host1)
+            local h1="$2"
+            shift
+            shift
+            ;;
+        --host2)
+            local h2="$2"
+            shift
+            shift
+            ;;
+        --ptype)
+            local ptype="$2"
+            shift
+            shift
+            ;;
+        --id)
+            local vid="$2"
+            shift
+            shift
+            ;;
+        --addr)
+            addr="$2"
+            shift
+            shift
+            ;;
+        -*|--*)
+            echo "Unknown option $1"
+            exit 1
+            ;;
+        *)
+            POSITIONAL_ARGS+=("$1") # save positional arg
+            shift # past argument
+            ;;
+    esac
+  done
+
+  if [[ ${loxilbs[*]} =~ (^|[[:space:]])$h1($|[[:space:]]) && "$pick_config" == "yes" ]]; then
+    return
+  fi
+
+  set -- "${POSITIONAL_ARGS[@]}" # restore positional parameters
+  link1=e$h1$h2
+  link2=e$h2$h1
+
+  #echo "$h1:$link1->$h2:$link2"
+
+  if [[ "$ptype" == "tagged" ]]; then
+      brport="$link1.$vid"
+      sudo ip -n $h1 link add link $link1 name $brport type vlan id $vid
+      sudo ip -n $h1 link set $brport up
+  else
+      brport=$link1
+  fi
+    
+  sudo ip -n $h1 link add vlan$vid type bridge 2>&1 | true
+  sudo ip -n $h1 link set $brport master vlan$vid
+  sudo ip -n $h1 link set vlan$vid up
+  if [[ "$addr" != "" ]]; then
+    sudo ip -n $h1 addr add $addr dev vlan$vid
+  fi
+}
+
+## arg1 - hostname1 
+## arg2 - hostname2 
+## arg3 - vxlan-id
+## arg4 - phy/vlan
+## arg5 - local ip if arg4 is phy/vlan-id if arg4 is vlan
+## arg6 - local ip if arg4 is vlan
+create_docker_host_vxlan() {
+  POSITIONAL_ARGS=()
+  while [[ $# -gt 0 ]]; do
+    case $1 in
+        --host1)
+            local h1="$2"
+            shift
+            shift
+            ;;
+        --host2)
+            local h2="$2"
+            shift
+            shift
+            ;;
+        --uif)
+            local uifType="$2"
+            shift
+            shift
+            ;;
+        --vid)
+            local vid="$2"
+            shift
+            shift
+            ;;
+        --pvid)
+            local pvid="$2"
+            shift
+            shift
+            ;;
+        --id)
+            local vxid="$2"
+            shift
+            shift
+            ;;
+        --ep)
+            local ep="$2"
+            shift
+            shift
+            ;;
+        --lip)
+            local lip="$2"
+            shift
+            shift
+            ;;
+        -*|--*)
+            echo "Unknown option $1"
+            exit 1
+            ;;
+        *)
+            POSITIONAL_ARGS+=("$1") # save positional arg
+            shift # past argument
+            ;;
+    esac
+  done
+
+  if [[ ${loxilbs[*]} =~ (^|[[:space:]])$h1($|[[:space:]]) && "$pick_config" == "yes" ]]; then
+    return
+  fi
+
+  set -- "${POSITIONAL_ARGS[@]}" # restore positional parameters
+  link1=e$h1$h2
+  link2=e$h2$h1
+
+  #echo "$h1:$link1->$h2:$link2"
+
+  if [[ "$uifType" == "phy" ]]; then
+    sudo ip -n $h1 link add vxlan$vxid type vxlan id $vxid local $lip dev $link1 dstport 0
+    sudo ip -n $h1 link set vxlan$vxid up
+  elif [[ "$uifType" == "vlan" ]]; then
+    sudo ip -n $h1 link add vxlan$vxid type vxlan id $vxid local $lip dev vlan$vid dstport 0
+    sudo ip -n $h1 link set vxlan$vxid up
+  fi
+
+  if [[ "$pvid" != "" ]]; then
+    sudo ip -n $h1 link add vlan$pvid type bridge 2>&1 | true
+    sudo ip -n $h1 link set vxlan$vxid master vlan$pvid
+    sudo ip -n $h1 link set vlan$pvid up
+  fi
+
+  if [[ "$ep" != "" ]]; then
+    sudo bridge -n $h1 fdb append 00:00:00:00:00:00 dst $ep dev vxlan$vxid
+  fi
+  
+}
+
+## arg1 - hostname1 
+## arg2 - hostname2 
+create_docker_host_cnbridge() {
+  POSITIONAL_ARGS=()
+  while [[ $# -gt 0 ]]; do
+    case $1 in
+        --host1)
+            local h1="$2"
+            shift
+            shift
+            ;;
+        --host2)
+            local h2="$2"
+            shift
+            shift
+            ;;
+        -*|--*)
+            echo "Unknown option $1"
+            exit 1
+            ;;
+        *)
+            POSITIONAL_ARGS+=("$1") # save positional arg
+            shift # past argument
+            ;;
+    esac
+  done
+
+  if [[ ${loxilbs[*]} =~ (^|[[:space:]])$h1($|[[:space:]]) && "$pick_config" == "yes" ]]; then
+    return
+  fi
+
+  set -- "${POSITIONAL_ARGS[@]}" # restore positional parameters
+  link1=e$h1$h2
+  link2=e$h2$h1
+
+  #echo "$h1:$link1->$h2:$link2"
+
+  brport=$link1
+    
+  sudo ip -n $h1 link add br$h1 type bridge 2>&1 | true
+  sudo ip -n $h1 link set $brport master br$h1
+  sudo ip -n $h1 link set br$h1 up
+}
+
+#Arg1: host name
+#Arg2: --<proto>:<iport>:<oport>
+#Arg3: --endpoints:<ip>:<weight>,..
+function create_lb_rule() {
+  if [[ ${loxilbs[*]} =~ (^|[[:space:]])$1($|[[:space:]]) && "$pick_config" == "yes" ]]; then
+    return
+  fi
+  args=( "$@" )
+  args=( "${args[@]/$1}" )
+  echo "$1: loxicmd create lb ${args[*]}"
+  $dexec $1 loxicmd create lb ${args[*]}
+
+  hook=$($dexec $1 tc filter show dev eth0 ingress | grep tc_packet_func)
+  if [[ $hook != *"tc_packet_func"* ]]; then
+    echo "ERROR : No hook point found";
+    exit 1
+  fi
+}
+
+#Arg1: host name
+#Arg2: <prefix/mask>
+#Arg3: <nexthop-ip>
+function add_route() {
+  if [[ ${loxilbs[*]} =~ (^|[[:space:]])$1($|[[:space:]]) && "$pick_config" == "yes" ]]; then
+    return
+  fi
+  echo "$1: ip route add $2 via $3 proto static"
+  $hexec $1 ip route add $2 via $3 proto static
+}
diff --git a/cicd/sctpmh-seagull/config.sh b/cicd/sctpmh-seagull/config.sh
new file mode 100755
index 000000000..bc09793b2
--- /dev/null
+++ b/cicd/sctpmh-seagull/config.sh
@@ -0,0 +1,23 @@
+#!/bin/bash
+vagrant global-status  | grep -i virtualbox | cut -f 1 -d ' ' | xargs -L 1 vagrant destroy -f
+vagrant up
+
+for i in {1..60}
+do
+    ping 4.0.4.3 -c 1 -W 1 2>&1> /dev/null;
+    if [[ $? -eq 0 ]]
+    then
+     echo -e "Machine rebooted [OK]"
+     code=0
+     break
+    else
+        echo -e "Waiting for machine to be UP"
+        sleep 1
+    fi
+done
+if [[ $code == 0 ]];
+then
+    vagrant ssh bastion -c 'sudo /vagrant/setup.sh'
+else
+    echo "VM not up"
+fi
diff --git a/cicd/sctpmh-seagull/rmconfig.sh b/cicd/sctpmh-seagull/rmconfig.sh
new file mode 100755
index 000000000..88da3a557
--- /dev/null
+++ b/cicd/sctpmh-seagull/rmconfig.sh
@@ -0,0 +1,3 @@
+#!/bin/bash
+vagrant destroy -f bastion
+sudo rm -rf status*.txt
diff --git a/cicd/sctpmh-seagull/rmsetup.sh b/cicd/sctpmh-seagull/rmsetup.sh
new file mode 100755
index 000000000..a2bf9aaeb
--- /dev/null
+++ b/cicd/sctpmh-seagull/rmsetup.sh
@@ -0,0 +1,35 @@
+#!/bin/bash
+
+echo "#########################################"
+echo "Removing testbed"
+echo "#########################################"
+
+source /vagrant/common.sh
+
+disconnect_docker_hosts user r1
+disconnect_docker_hosts user r2
+disconnect_docker_hosts r1 sw1
+disconnect_docker_hosts r2 sw1
+disconnect_docker_hosts sw1 llb1
+disconnect_docker_hosts sw1 llb2
+disconnect_docker_hosts llb1 sw2
+disconnect_docker_hosts llb2 sw2
+disconnect_docker_hosts sw2 r3
+disconnect_docker_hosts sw2 r4
+disconnect_docker_hosts r3 ep1
+disconnect_docker_hosts r4 ep1
+
+delete_docker_host user
+delete_docker_host llb1
+delete_docker_host llb2
+delete_docker_host r1
+delete_docker_host r2
+delete_docker_host r3
+delete_docker_host r4
+delete_docker_host sw1
+delete_docker_host sw2
+delete_docker_host ep1
+
+echo "#########################################"
+echo "Removed testbed"
+echo "#########################################"
diff --git a/cicd/sctpmh-seagull/setup.sh b/cicd/sctpmh-seagull/setup.sh
new file mode 100755
index 000000000..a19ff84d0
--- /dev/null
+++ b/cicd/sctpmh-seagull/setup.sh
@@ -0,0 +1,121 @@
+#!/bin/bash
+
+source /vagrant/common.sh
+
+echo "#########################################"
+echo "Spawning all hosts"
+echo "#########################################"
+
+spawn_docker_host --dock-type loxilb --dock-name llb1 --with-ka in
+spawn_docker_host --dock-type loxilb --dock-name llb2 --with-ka in
+spawn_docker_host --dock-type seahost --dock-name ep1
+spawn_docker_host --dock-type host --dock-name r1
+spawn_docker_host --dock-type host --dock-name r2
+spawn_docker_host --dock-type host --dock-name r3
+spawn_docker_host --dock-type host --dock-name r4
+spawn_docker_host --dock-type host --dock-name sw1
+spawn_docker_host --dock-type host --dock-name sw2
+spawn_docker_host --dock-type seahost --dock-name user
+
+echo "#########################################"
+echo "Connecting and configuring  hosts"
+echo "#########################################"
+
+connect_docker_hosts user r1
+connect_docker_hosts user r2
+connect_docker_hosts r1 sw1
+connect_docker_hosts r2 sw1
+connect_docker_hosts sw1 llb1
+connect_docker_hosts sw1 llb2
+connect_docker_hosts llb1 sw2
+connect_docker_hosts llb2 sw2
+connect_docker_hosts sw2 r3
+connect_docker_hosts sw2 r4
+connect_docker_hosts r3 ep1
+connect_docker_hosts r4 ep1
+
+create_docker_host_cnbridge --host1 sw1 --host2 llb1
+create_docker_host_cnbridge --host1 sw1 --host2 llb2
+create_docker_host_cnbridge --host1 sw1 --host2 r1
+create_docker_host_cnbridge --host1 sw1 --host2 r2
+
+create_docker_host_cnbridge --host1 sw2 --host2 llb1
+create_docker_host_cnbridge --host1 sw2 --host2 llb2
+create_docker_host_cnbridge --host1 sw2 --host2 r3
+create_docker_host_cnbridge --host1 sw2 --host2 r4
+
+#node1 config
+config_docker_host --host1 user --host2 r1 --ptype phy --addr 1.1.1.1/24 --gw 1.1.1.254
+config_docker_host --host1 user --host2 r2 --ptype phy --addr 2.2.2.1/24
+config_docker_host --host1 r1 --host2 user --ptype phy --addr 1.1.1.254/24
+config_docker_host --host1 r2 --host2 user --ptype phy --addr 2.2.2.254/24
+
+create_docker_host_vlan --host1 llb1 --host2 sw1 --id 11 --ptype untagged
+create_docker_host_vlan --host1 llb2 --host2 sw1 --id 11 --ptype untagged
+create_docker_host_vlan --host1 r1 --host2 sw1 --id 11 --ptype untagged
+create_docker_host_vlan --host1 r2 --host2 sw1 --id 11 --ptype untagged
+config_docker_host --host1 r1 --host2 sw1 --ptype vlan --id 11 --addr 11.11.11.253/24 --gw 11.11.11.11
+config_docker_host --host1 r2 --host2 sw1 --ptype vlan --id 11 --addr 11.11.11.254/24 --gw 11.11.11.11
+config_docker_host --host1 llb1 --host2 sw1 --ptype vlan --id 11 --addr 11.11.11.1/24
+config_docker_host --host1 llb2 --host2 sw1 --ptype vlan --id 11 --addr 11.11.11.2/24
+
+create_docker_host_vlan --host1 llb1 --host2 sw2 --id 10 --ptype untagged
+create_docker_host_vlan --host1 llb2 --host2 sw2 --id 10 --ptype untagged
+create_docker_host_vlan --host1 r3 --host2 sw2 --id 10 --ptype untagged
+create_docker_host_vlan --host1 r4 --host2 sw2 --id 10 --ptype untagged
+
+config_docker_host --host1 r3 --host2 sw2 --ptype vlan --id 10 --addr 10.10.10.253/24 --gw 10.10.10.10
+config_docker_host --host1 r4 --host2 sw2 --ptype vlan --id 10 --addr 10.10.10.254/24 --gw 10.10.10.10
+config_docker_host --host1 llb1 --host2 sw2 --ptype vlan --id 10 --addr 10.10.10.1/24
+config_docker_host --host1 llb2 --host2 sw2 --ptype vlan --id 10 --addr 10.10.10.2/24
+
+config_docker_host --host1 ep1 --host2 r3 --ptype phy --addr 31.31.31.1/24 --gw 31.31.31.254
+config_docker_host --host1 ep1 --host2 r4 --ptype phy --addr 32.32.32.1/24
+config_docker_host --host1 r3 --host2 ep1 --ptype phy --addr 31.31.31.254/24
+config_docker_host --host1 r4 --host2 ep1 --ptype phy --addr 32.32.32.254/24
+
+$hexec user ip route change default via 1.1.1.254
+$hexec ep1 ip route change default via 31.31.31.254
+
+# Backup paths in user
+$hexec user ip route add 21.21.21.1/32 via 2.2.2.254
+$hexec user ip route add 134.134.134.1/32 via 2.2.2.254
+
+$hexec ep1 ip route add 134.134.134.1/32 via 32.32.32.254
+$hexec ep1 ip route add 135.135.135.1/32 via 31.31.31.254
+
+$hexec llb1 ip route add 1.1.1.0/24 via 11.11.11.253
+$hexec llb1 ip route add 2.2.2.0/24 via 11.11.11.254
+$hexec llb2 ip route add 1.1.1.0/24 via 11.11.11.253
+$hexec llb2 ip route add 2.2.2.0/24 via 11.11.11.254
+
+$hexec llb1 ip route add 31.31.31.0/24 via 10.10.10.253
+$hexec llb1 ip route add 32.32.32.0/24 via 10.10.10.254
+$hexec llb2 ip route add 31.31.31.0/24 via 10.10.10.253
+$hexec llb2 ip route add 32.32.32.0/24 via 10.10.10.254
+
+sleep 20
+##Create LB rule user->ep1
+create_lb_rule llb1 20.20.20.1 --name=sctpmh1 --secips=21.21.21.1,22.22.22.1 --sctp=2020:8080 --endpoints=31.31.31.1:1 --mode=fullnat
+create_lb_rule llb2 20.20.20.1 --name=sctpmh1 --secips=21.21.21.1,22.22.22.1 --sctp=2020:8080 --endpoints=31.31.31.1:1 --mode=fullnat
+
+##Create LB rule ep1->user
+create_lb_rule llb1 133.133.133.1 --name=sctpmh2 --secips=134.134.134.1,135.135.135.1 --sctp=2020:8080 --endpoints=1.1.1.1:1 --mode=fullnat
+create_lb_rule llb2 133.133.133.1 --name=sctpmh2 --secips=134.134.134.1,135.135.135.1 --sctp=2020:8080 --endpoints=1.1.1.1:1 --mode=fullnat
+
+$dexec llb1 loxicmd create ep 1.1.1.1 --name=1.1.1.1_sctp_8080 --probetype=ping
+$dexec llb1 loxicmd create ep 31.31.31.1 --name=31.31.31.1_sctp_8080 --probetype=ping
+$dexec llb2 loxicmd create ep 1.1.1.1 --name=1.1.1.1_sctp_8080 --probetype=ping
+$dexec llb2 loxicmd create ep 31.31.31.1 --name=31.31.31.1_sctp_8080 --probetype=ping
+
+
+create_lb_rule llb1 11.11.11.11 --tcp=80:8080 --endpoints=31.31.31.1:1
+create_lb_rule llb2 11.11.11.11 --tcp=80:8080 --endpoints=31.31.31.1:1
+create_lb_rule llb1 10.10.10.10 --tcp=80:8080 --endpoints=31.31.31.1:1
+create_lb_rule llb2 10.10.10.10 --tcp=80:8080 --endpoints=31.31.31.1:1
+
+$dexec llb1 loxicmd save --all
+$dexec llb2 loxicmd save --all
+
+$hexec user ifconfig eth0 0
+$hexec ep1 ifconfig eth0 0
diff --git a/cicd/sctpmh-seagull/validation.sh b/cicd/sctpmh-seagull/validation.sh
new file mode 100755
index 000000000..25b73e7b1
--- /dev/null
+++ b/cicd/sctpmh-seagull/validation.sh
@@ -0,0 +1,56 @@
+#!/bin/bash
+code=0
+tc=( "Basic Test - Client & EP Uni-homed and LB is Multi-homed" "Multipath Test, Client and LB Multihomed, EP is uni-homed" "C2LB Multipath Failover Test - Client and LB Multihomed, EP is uni-homed" "E2E Multipath Failover Test - Client, LB and EP all Multihomed" "C2LB HA Failover Test - Client and LB Multihomed, EP is uni-homed" "E2E HA Failover Test. Client, LB and EP all Multihomed" )
+padding="............................................................................................................."
+border="**************************************************************************************************************************************************"
+
+for((j=0,i=1; i<=6; i++, j++)); do
+    echo "SCTP Multihoming - Test case #$i"
+    echo -e "\n\n\n$border\n"
+    cmd="sudo /vagrant/validation$i.sh"
+    vagrant ssh bastion -c "$cmd"
+    echo -e "\n\n"
+    file=status$i.txt
+    status=`cat $file`
+    title=${tc[j]}
+    echo -e "\n\n"
+
+    if [[ $status == "NOK" ]]; then
+        code=1
+        printf "Test case #%2s - %s%s %s\n" "$i" "$title" "${padding:${#title}}" "[FAILED]";
+    else
+        printf "Test case #%2s - %s%s %s\n" "$i" "$title" "${padding:${#title}}" "[PASSED]";
+    fi
+    echo -e "\n\n\n$border\n\n"
+
+    sleep 30
+done
+
+echo -e "\n\n\n$border\n"
+printf "================================================== SCTP MULTIHOMING CONSOLIDATED RESULT ==========================================================\n"
+for((j=0,i=1; i<=6; i++, j++)); do
+    file=status$i.txt
+    status=`cat $file`
+    title=${tc[j]}
+    echo -e "\n\n"
+
+    if [[ $status == "NOK" ]]; then
+        code=1
+        printf "Test case #%2s - %s%s %s\n" "$i" "$title" "${padding:${#title}}" "[FAILED]";
+    else
+        printf "Test case #%2s - %s%s %s\n" "$i" "$title" "${padding:${#title}}" "[PASSED]";
+    fi
+done
+
+echo -e "\n$border"
+
+echo -e "\n\n\n$border\n"
+if [[ $code == 0 ]]; then
+    echo -e "SCTP Multihoming CICD [OK]"
+else
+    echo -e "SCTP Multihoming CICD [NOK]"
+fi
+echo -e "\n$border\n"
+
+
+exit $code
diff --git a/cicd/sctpmh-seagull/validation1.sh b/cicd/sctpmh-seagull/validation1.sh
new file mode 100755
index 000000000..20e0454f8
--- /dev/null
+++ b/cicd/sctpmh-seagull/validation1.sh
@@ -0,0 +1,67 @@
+#!/bin/bash
+source /vagrant/common.sh
+source /vagrant/check_ha.sh
+
+echo -e "sctpmh: SCTP Multihoming Basic Test - Client & EP Uni-homed and LB is Multi-homed\n"
+extIP="20.20.20.1"
+port=2020
+
+check_ha
+
+echo "SCTP Multihoming service sctp-lb -> $extIP:$port"
+echo -e "------------------------------------------------------------------------------------\n"
+
+sudo docker exec -dt ep1 ksh -c 'export LD_PRELOAD=/usr/local/bin/libsctplib.so.1.0.8; export LD_LIBRARY_PATH=/usr/local/bin; cd /opt/seagull/diameter-env/run/; timeout 40 stdbuf -oL seagull -conf ../config/conf.server.xml -dico ../config/base_s6a.xml -scen ../scenario/ulr-ula.server.xml > ep1.out' 2>&1 > /dev/null &
+sleep 2
+
+sudo docker exec -dt user ksh -c 'export LD_PRELOAD=/usr/local/bin/libsctplib.so.1.0.8; export LD_LIBRARY_PATH=/usr/local/bin; cd /opt/seagull/diameter-env/run/; timeout 25 stdbuf -oL seagull -conf ../config/conf.client.xml -dico ../config/base_s6a.xml -scen ../scenario/ulr-ula.client.xml > user.out' 2>&1 > /dev/null &
+
+sleep 2
+
+for((i=0;i<5;i++)) do
+    $dexec user bash -c 'tail -n 25 /opt/seagull/diameter-env/run/user.out'
+    res=$(sudo docker exec -t user bash -c 'tail -n 10 /opt/seagull/diameter-env/run/user.out | grep "Successful calls"'| xargs | cut -d '|' -f 4)
+    $dexec $master loxicmd get ct --servName=sctpmh1
+    echo -e "\n"
+    sleep 5
+done
+
+if [ "$res" -gt "0" ]; then
+    #echo -e $res
+    echo -e "\nsctpmh SCTP Multihoming service Basic Test [OK]\n"
+    echo "OK" > /vagrant/status1.txt
+    restart_loxilbs
+else
+    echo "NOK" > /vagrant/status1.txt
+    echo "sctpmh SCTP Multihoming service Basic Test [NOK]"
+    echo "Calls : $res"
+    ## Dump some debug info
+    echo "system route-info"
+    echo -e "\nuser"
+    sudo ip netns exec user ip route
+    echo -e "\nr1"
+    sudo ip netns exec r1 ip route
+    echo -e "\nr2"
+    sudo ip netns exec r2 ip route
+    echo -e "\nllb1"
+    sudo ip netns exec llb1 ip route
+    echo -e "\nr3"
+    sudo ip netns exec r3 ip route
+    echo -e "\nr4"
+    sudo ip netns exec r4 ip route
+    echo "-----------------------------"
+
+    echo -e "\nllb1 lb-info"
+    $dexec llb1 loxicmd get lb
+    echo "llb1 ep-info"
+    $dexec llb1 loxicmd get ep
+    echo "llb1 bpf-info"
+    $dexec llb1 ntc filter show dev eth0 ingress
+    echo "BFP trace -- "
+    sudo timeout 5 cat  /sys/kernel/debug/tracing/trace_pipe
+    sudo killall -9 cat
+    echo "BFP trace -- "
+    restart_loxilbs
+    exit 1
+fi
+echo -e "------------------------------------------------------------------------------------\n\n\n"
diff --git a/cicd/sctpmh-seagull/validation2.sh b/cicd/sctpmh-seagull/validation2.sh
new file mode 100755
index 000000000..f001a497f
--- /dev/null
+++ b/cicd/sctpmh-seagull/validation2.sh
@@ -0,0 +1,114 @@
+#!/bin/bash
+source /vagrant/common.sh
+source /vagrant/check_ha.sh
+echo -e "sctpmh: SCTP Multihoming - Multipath Test, Client and LB Multihomed, EP is uni-homed\n"
+extIP="20.20.20.1"
+port=2020
+
+check_ha
+
+echo "SCTP Multihoming service sctp-lb(Multipath traffic) -> $extIP:$port"
+echo -e "------------------------------------------------------------------------------------\n"
+
+echo -e "\nHA state Master:$master BACKUP-$backup\n"
+
+sudo docker exec -dt ep1 ksh -c 'export LD_PRELOAD=/usr/local/bin/libsctplib.so.1.0.8; export LD_LIBRARY_PATH=/usr/local/bin; cd /opt/seagull/diameter-env/run/; timeout 40 stdbuf -oL seagull -conf ../config/conf.server.xml -dico ../config/base_s6a.xml -scen ../scenario/ulr-ula.server.xml > ep1.out' 2>&1 > /dev/null &
+sleep 2
+
+sudo docker exec -dt user ksh -c 'export LD_PRELOAD=/usr/local/bin/libsctplib.so.1.0.8; export LD_LIBRARY_PATH=/usr/local/bin; cd /opt/seagull/diameter-env/run/; timeout 25 stdbuf -oL seagull -conf ../config/conf.client.xml -dico ../config/base_s6a.xml -scen ../scenario/ulr-ula.client.xml > user.out' 2>&1 > /dev/null &
+
+sleep 2
+#Path counters
+p1c_old=0
+p1c_new=0
+p2c_old=0
+p2c_new=0
+p3c_old=0
+p3c_new=0
+call_old=0
+call_new=0
+
+for((i=0;i<5;i++)) do
+
+    $dexec user bash -c 'tail -n 25 /opt/seagull/diameter-env/run/user.out'
+    call_new=$(sudo docker exec -t user bash -c 'tail -n 10 /opt/seagull/diameter-env/run/user.out | grep "Successful calls"'| xargs | cut -d '|' -f 4)
+    echo -e "\n\n"
+    $dexec $master loxicmd get ct --servName=sctpmh1
+    echo -e "\n"
+    p1c_new=$(sudo docker exec -i $master loxicmd get ct --servName=sctpmh1 | grep "20.20.20.1 | 1.1.1.1" | xargs | cut -d '|' -f 10)
+    p2c_new=$(sudo docker exec -i $master loxicmd get ct --servName=sctpmh1 | grep "21.21.21.1 | 2.2.2.1" | xargs | cut -d '|' -f 10)
+    p3c_new=$(sudo docker exec -i $master loxicmd get ct --servName=sctpmh1 | grep "22.22.22.1 | 1.1.1.1" | xargs | cut -d '|' -f 10)
+    
+    echo "Counters: $p1c_new $p2c_new $p3c_new"
+
+    if [[ $p1c_new -gt $p1c_old ]]; then
+        echo "Path 1: 1.1.1.1 -> 20.20.20.1 [ACTIVE]"
+        p1=1
+    else
+        echo "Path 1: 1.1.1.1 -> 20.20.20.1 [NOT ACTIVE]"
+    fi
+
+    if [[ $p2c_new -gt $p2c_old ]]; then
+        echo "Path 2: 2.2.2.1 -> 21.21.21.1 [ACTIVE]"
+        p2=1
+    else
+        echo "Path 2: 2.2.2.1 -> 21.21.21.1 [NOT ACTIVE]"
+    fi
+
+    if [[ $p3c_new -gt $p3c_old ]]; then
+        echo "Path 3: 1.1.1.1 -> 22.22.22.1 [ACTIVE]"
+        p3=1
+    else
+        echo "Path 3: 1.1.1.1 -> 22.22.22.1 [NOT ACTIVE]"
+    fi
+    if [[ $call_new -gt $call_old ]]; then
+	    echo "\nSuccessful Calls: \t$call_new [ACTIVE]"
+        calls=1
+    else
+        echo "\nSuccessful Calls: \t$call_new [NOT ACTIVE]"
+    fi
+
+    p1c_old=$p1c_new
+    p2c_old=$p1c_new
+    p2c_old=$p1c_new
+    call_old=$call_new
+    echo -e "\n"
+    sleep 5
+done
+
+if [[ $p1 == 1 && $p2 == 1 && $p3 == 1 && $calls == 1 ]]; then
+    echo "sctpmh SCTP Multihoming Multipath [OK]"
+    echo "OK" > /vagrant/status2.txt
+    restart_loxilbs
+else
+    echo "NOK" > /vagrant/status2.txt
+    echo "sctpmh SCTP Multihoming Multipath [NOK]"
+    echo -e "\nuser"
+    sudo ip netns exec user ip route
+    echo -e "\nr1"
+    sudo ip netns exec r1 ip route
+    echo -e "\nr2"
+    sudo ip netns exec r2 ip route
+    echo -e "\nllb1"
+    sudo ip netns exec llb1 ip route
+    echo -e "\nllb2"
+    sudo ip netns exec llb2 ip route
+    echo -e "\nr3"
+    sudo ip netns exec r3 ip route
+    echo -e "\nr4"
+    sudo ip netns exec r4 ip route
+    echo "-----------------------------"
+
+    echo -e "\nllb1 lb-info"
+    $dexec llb1 loxicmd get lb
+    echo "llb1 ep-info"
+    $dexec llb1 loxicmd get ep
+    echo "-----------------------------"
+    echo -e "\nllb2 lb-info"
+    $dexec llb2 loxicmd get lb
+    echo "llb2 ep-info"
+    $dexec llb2 loxicmd get ep
+    restart_loxilbs
+    exit 1
+fi
+echo -e "------------------------------------------------------------------------------------\n\n\n"
diff --git a/cicd/sctpmh-seagull/validation3.sh b/cicd/sctpmh-seagull/validation3.sh
new file mode 100755
index 000000000..5a31136d9
--- /dev/null
+++ b/cicd/sctpmh-seagull/validation3.sh
@@ -0,0 +1,171 @@
+#!/bin/bash
+source /vagrant/common.sh
+source /vagrant/check_ha.sh
+
+echo -e "sctpmh: SCTP Multihoming - Multipath Failover Test. Client and LB Multihomed, EP is uni-homed\n"
+extIP="20.20.20.1"
+port=2020
+
+check_ha
+
+echo "SCTP Multihoming service sctp-lb(Multipath traffic) -> $extIP:$port"
+echo -e "------------------------------------------------------------------------------------\n"
+
+echo -e "\nHA state Master:$master BACKUP-$backup\n"
+
+echo -e "\nTraffic Flow: User -> LB -> EP "
+
+sudo docker exec -dt user ksh -c "sed -i 's/\"call-rate\" value=\"5000\"/\"call-rate\" value=\"100\"/g' /opt/seagull/diameter-env/config/conf.client.xml"
+
+sudo docker exec -dt ep1 ksh -c 'export LD_PRELOAD=/usr/local/bin/libsctplib.so.1.0.8; export LD_LIBRARY_PATH=/usr/local/bin; cd /opt/seagull/diameter-env/run/; timeout 220 stdbuf -oL seagull -conf ../config/conf.server.xml -dico ../config/base_s6a.xml -scen ../scenario/ulr-ula.server.xml > ep1.out' 2>&1 > /dev/null &
+sleep 2
+
+sudo docker exec -dt user ksh -c 'export LD_PRELOAD=/usr/local/bin/libsctplib.so.1.0.8; export LD_LIBRARY_PATH=/usr/local/bin; cd /opt/seagull/diameter-env/run/; timeout 210 stdbuf -oL seagull -conf ../config/conf.client.xml -dico ../config/base_s6a.xml -scen ../scenario/ulr-ula.client.xml > user.out' 2>&1 > /dev/null &
+
+sleep 30
+#Path counters
+p1c_old=0
+p1c_new=0
+p2c_old=0
+p2c_new=0
+p3c_old=0
+p3c_new=0
+down=0
+code=0
+call_old=0
+call_new=0
+fail_old=0
+fail_new=0
+recover=0
+frecover=0
+
+for((i=0;i<35;i++)) do
+    $dexec user bash -c 'tail -n 25 /opt/seagull/diameter-env/run/user.out'
+    call_new=$(sudo docker exec -t user bash -c 'tail -n 10 /opt/seagull/diameter-env/run/user.out | grep "Successful calls"'| xargs | cut -d '|' -f 4)
+    fail_new=$(sudo docker exec -t user bash -c 'tail -n 10 /opt/seagull/diameter-env/run/user.out | grep "Failed calls"'| xargs | cut -d '|' -f 4)
+    echo -e "\n\n"
+    $dexec $master loxicmd get ct --servName=sctpmh1
+    echo -e "\n"
+    p1c_new=$(sudo docker exec -i $master loxicmd get ct --servName=sctpmh1 | grep "20.20.20.1 | 1.1.1.1" | xargs | cut -d '|' -f 10)
+    p2c_new=$(sudo docker exec -i $master loxicmd get ct --servName=sctpmh1 | grep "21.21.21.1 | 2.2.2.1" | xargs | cut -d '|' -f 10)
+    p3c_new=$(sudo docker exec -i $master loxicmd get ct --servName=sctpmh1 | grep "22.22.22.1 | 1.1.1.1" | xargs | cut -d '|' -f 10)
+    
+    echo "Counters: $p1c_new $p2c_new $p3c_new"
+
+    if [[ $p1c_new -gt $p1c_old ]]; then
+        echo "Path 1: 1.1.1.1 -> 20.20.20.1 [ACTIVE]"
+        p1=1
+        #if [[ $down == 1 ]]; then
+            #echo "This path shouldn't be ACTIVE"
+            #code=1
+        #fi
+        echo -e "Turning off this path from User->LB\n"
+        $hexec user ip link set euserr1 down;
+        down=1
+        p1c_new=$(sudo docker exec -i $master loxicmd get ct --servName=sctpmh1 | grep "20.20.20.1 | 1.1.1.1" | xargs | cut -d '|' -f 10)
+    else
+        if [[ $down == 1 ]]; then
+            p1dok=1
+            echo "Path 1: 1.1.1.1 -> 20.20.20.1 NOT ACTIVE - [OK]"
+        else  
+            echo "Path 1: 1.1.1.1 -> 20.20.20.1 [NOT ACTIVE]"
+        fi
+    fi
+
+    if [[ $p2c_new -gt $p2c_old ]]; then
+        echo "Path 2: 2.2.2.1 -> 21.21.21.1 [ACTIVE]"
+        p2=1
+    else
+        echo "Path 2: 2.2.2.1 -> 21.21.21.1 [NOT ACTIVE]"
+    fi
+
+    if [[ $p3c_new -gt $p3c_old ]]; then
+        echo "Path 3: 1.1.1.1 -> 22.22.22.1 [ACTIVE]"
+        p3=1
+    else
+        echo "Path 3: 1.1.1.1 -> 22.22.22.1 [NOT ACTIVE]"
+    fi
+    
+    echo -e "\n"
+	if [[ $recover == 1 ]]; then
+        printf "\t***Setup Recovered***"
+    fi
+    echo -e "\n\n"
+
+    if [[ $fail_new -gt $fail_old && $down == 1 && $recover == 0 ]]; then
+	    printf "Failed Calls:   \t%10s \t[INCREASING]\n" $fail_new
+	    fstart=1
+        code=1
+        calls=0
+    else 
+        if [[ $fail_new -eq $fail_old ]]; then
+            if [[ $down == 1 && $fstart == 1 ]]; then
+	            printf "Failed Calls:   \t%10s \t[STABLE]\n" $fail_new
+	            frecover=1
+                code=0
+            else
+	            printf "Failed Calls:   \t%10s\n" $fail_new
+	        fi
+        fi
+    fi
+
+    if [[ $call_new -gt $call_old ]]; then
+	    printf "Successful Calls: \t%10s \t[ACTIVE]\n" $call_new
+        calls=1
+	    if [[ $down == 1 && $frecover == 1 ]]; then
+            recover=1
+	    fi
+    else
+	    printf "Successful Calls: \t%10s \t[NOT ACTIVE]\n" $call_new
+    fi
+
+    p1c_old=$p1c_new
+    p2c_old=$p1c_new
+    p2c_old=$p1c_new
+    call_old=$call_new
+    fail_old=$fail_new
+    echo -e "\n"
+    sleep 5
+done
+
+#Restore
+$hexec user ip link set euserr1 up
+$hexec user ip route add default via 1.1.1.254
+sudo docker exec -dt user ksh -c "sed -i 's/\"call-rate\" value=\"100\"/\"call-rate\" value=\"5000\"/g' /opt/seagull/diameter-env/config/conf.client.xml"
+
+if [[ $calls == 1 && $p1 == 1 && $p2 == 1 && $p3 == 1 && $code == 0 && $recover == 1 ]]; then
+    echo "sctpmh SCTP Multihoming Multipath Failover [OK]"
+    echo "OK" > /vagrant/status3.txt
+    restart_loxilbs
+else
+    echo "NOK" > /vagrant/status3.txt
+    echo "sctpmh SCTP Multihoming Multipath Failover [NOK]"
+    echo -e "\nuser"
+    sudo ip netns exec user ip route
+    echo -e "\nr1"
+    sudo ip netns exec r1 ip route
+    echo -e "\nr2"
+    sudo ip netns exec r2 ip route
+    echo -e "\nllb1"
+    sudo ip netns exec llb1 ip route
+    echo -e "\nllb2"
+    sudo ip netns exec llb2 ip route
+    echo -e "\nr3"
+    sudo ip netns exec r3 ip route
+    echo -e "\nr4"
+    sudo ip netns exec r4 ip route
+    echo "-----------------------------"
+
+    echo -e "\nllb1 lb-info"
+    $dexec llb1 loxicmd get lb
+    echo "llb1 ep-info"
+    $dexec llb1 loxicmd get ep
+    echo -e "\nllb2 lb-info"
+    $dexec llb2 loxicmd get lb
+    echo "llb2 ep-info"
+    $dexec llb2 loxicmd get ep
+    echo "-----------------------------"
+    restart_loxilbs
+    exit 1
+fi
+echo -e "------------------------------------------------------------------------------------\n\n\n"
diff --git a/cicd/sctpmh-seagull/validation4.sh b/cicd/sctpmh-seagull/validation4.sh
new file mode 100755
index 000000000..0bf76671f
--- /dev/null
+++ b/cicd/sctpmh-seagull/validation4.sh
@@ -0,0 +1,172 @@
+#!/bin/bash
+source /vagrant/common.sh
+source /vagrant/check_ha.sh
+echo -e "sctpmh: SCTP Multihoming - E2E Multipath Failover Test. Client, LB and EP all Multihomed\n"
+extIP="133.133.133.1"
+port=2020
+
+check_ha
+
+echo "SCTP Multihoming service sctp-lb(Multipath traffic) -> $extIP:$port"
+echo -e "------------------------------------------------------------------------------------\n"
+
+echo -e "\nHA state Master:$master BACKUP-$backup\n"
+echo -e "\nTraffic Flow: EP ---> LB ---> User"
+
+sudo docker exec -dt user ksh -c 'sed -i 's/source=31.31.31.1/source=0.0.0.0/g' /opt/seagull/diameter-env/config/conf.server.xml'
+
+sudo docker exec -dt user ksh -c 'export LD_PRELOAD=/usr/local/bin/libsctplib.so.1.0.8; export LD_LIBRARY_PATH=/usr/local/bin; cd /opt/seagull/diameter-env/run/; timeout 220 stdbuf -oL seagull -conf ../config/conf.server.xml -dico ../config/base_s6a.xml -scen ../scenario/ulr-ula.server.xml > user.out' 2>&1 > /dev/null &
+sleep 2
+
+sudo docker exec -dt ep1 ksh -c "sed -i 's/\"call-rate\" value=\"5000\"/\"call-rate\" value=\"100\"/g' /opt/seagull/diameter-env/config/conf.client.xml"
+sudo docker exec -dt ep1 ksh -c 'sed -i 's/dest=20.20.20.1/dest=133.133.133.1/g' /opt/seagull/diameter-env/config/conf.client.xml'
+sudo docker exec -dt ep1 ksh -c 'export LD_PRELOAD=/usr/local/bin/libsctplib.so.1.0.8; export LD_LIBRARY_PATH=/usr/local/bin; cd /opt/seagull/diameter-env/run/; timeout 210 stdbuf -oL seagull -conf ../config/conf.client.xml -dico ../config/base_s6a.xml -scen ../scenario/ulr-ula.client.xml > ep1.out' 2>&1 > /dev/null &
+
+sleep 20
+
+#Path counters
+p1c_old=0
+p1c_new=0
+p2c_old=0
+p2c_new=0
+p3c_old=0
+p3c_new=0
+down=0
+code=0
+call_old=0
+call_new=0
+fail_old=0
+fail_new=0
+recover=0
+frecover=0
+calls=0
+for((i=0;i<35;i++)) do
+    $dexec ep1 bash -c 'tail -n 25 /opt/seagull/diameter-env/run/ep1.out'
+    call_new=$(sudo docker exec -t ep1 bash -c 'tail -n 10 /opt/seagull/diameter-env/run/ep1.out | grep "Successful calls"'| xargs | cut -d '|' -f 4)
+    fail_new=$(sudo docker exec -t ep1 bash -c 'tail -n 10 /opt/seagull/diameter-env/run/ep1.out | grep "Failed calls"'| xargs | cut -d '|' -f 4)
+    echo -e "\n"
+    $dexec $master loxicmd get ct --servName=sctpmh2
+    echo -e "\n"
+    p1c_new=$(sudo docker exec -i $master loxicmd get ct --servName=sctpmh2 | grep "133.133.133.1 | 31.31.31.1" | xargs | cut -d '|' -f 10)
+    p2c_new=$(sudo docker exec -i $master loxicmd get ct --servName=sctpmh2 | grep "134.134.134.1 | 32.32.32.1" | xargs | cut -d '|' -f 10)
+    p3c_new=$(sudo docker exec -i $master loxicmd get ct --servName=sctpmh2 | grep "135.135.135.1 | 31.31.31.1" | xargs | cut -d '|' -f 10)
+    
+    echo "Counters: $p1c_new $p2c_new $p3c_new"
+
+    if [[ $p1c_new -gt $p1c_old ]]; then
+        echo "Path 1: 31.31.31.1 -> 133.133.133.1 -> 1.1.1.1 [ACTIVE]"
+        p1=1
+        echo -e "Turning off this path at User.\nEP----->LB--x-->User"
+        $hexec user ip link set euserr1 down;
+        down=1
+    else
+        if [[ $down == 1 ]]; then
+            p1dok=1
+            echo "Path 1: 31.31.31.1 -> 133.133.133.1 -> 1.1.1.1 NOT ACTIVE - [OK]"
+        else  
+            echo "Path 1: 31.31.31.1 -> 133.133.133.1 -> 1.1.1.1 [NOT ACTIVE]"
+        fi
+    fi
+
+    if [[ $p2c_new -gt $p2c_old ]]; then
+        echo "Path 2: 32.32.32.1 -> 134.134.134.1 -> 2.2.2.1 [ACTIVE]"
+        p2=1
+    else
+        echo "Path 2: 32.32.32.1 -> 134.134.134.1 -> 2.2.2.1 [NOT ACTIVE]"
+    fi
+
+    if [[ $p3c_new -gt $p3c_old ]]; then
+        echo "Path 3: 31.31.31.1 -> 135.135.135.1 -> 1.1.1.1 [ACTIVE]"
+        p3=1
+    else
+        echo "Path 3: 31.31.31.1 -> 135.135.135.1 -> 1.1.1.1 [NOT ACTIVE]"
+    fi
+    
+    echo -e "\n"
+	if [[ $recover == 1 ]]; then
+        printf "\t***Setup Recovered***"
+    fi
+    echo -e "\n\n"
+
+    if [[ $fail_new -gt $fail_old && $down == 1 && $recover == 0 ]]; then
+	    printf "Failed Calls:   \t%10s \t[INCREASING]\n" $fail_new
+	    fstart=1
+        code=1
+        calls=0
+    else 
+        if [[ $fail_new -eq $fail_old ]]; then
+            if [[ $down == 1 && $fstart == 1 ]]; then
+	            printf "Failed Calls:   \t%10s \t[STABLE]\n" $fail_new
+	            frecover=1
+                code=0
+            else
+	            printf "Failed Calls:   \t%10s\n" $fail_new
+	        fi
+        fi
+    fi
+
+    if [[ $call_new -gt $call_old ]]; then
+	    printf "Successful Calls: \t%10s \t[ACTIVE]\n" $call_new
+        calls=1
+	    if [[ $down == 1 && $frecover == 1 ]]; then
+            recover=1
+	    fi
+    else
+	    printf "Successful Calls: \t%10s \t[NOT ACTIVE]\n" $call_new
+    fi
+
+    p1c_old=$p1c_new
+    p2c_old=$p1c_new
+    p2c_old=$p1c_new
+    call_old=$call_new
+    fail_old=$fail_new
+    echo -e "\n"
+    sleep 5
+done
+
+#sudo rm -rf *.out
+#sudo pkill sctp_test
+
+#Restore
+$hexec user ip link set euserr1 up
+$hexec user ip route add default via 1.1.1.254
+sudo docker exec -dt user ksh -c 'sed -i 's/source=0.0.0.0/source=31.31.31.1/g' /opt/seagull/diameter-env/config/conf.server.xml'
+sudo docker exec -dt ep1 ksh -c 'sed -i 's/dest=133.133.133.1/dest=20.20.20.1/g' /opt/seagull/diameter-env/config/conf.client.xml'
+sudo docker exec -dt ep1 ksh -c "sed -i 's/\"call-rate\" value=\"100\"/\"call-rate\" value=\"5000\"/g' /opt/seagull/diameter-env/config/conf.client.xml"
+
+if [[ $calls == 1 && $p1 == 1 && $p2 == 1 && $p3 == 1 && $code == 0 && $recover == 1 ]]; then
+    echo "sctpmh SCTP Multihoming E2E Multipath Failover [OK]"
+    echo "OK" > /vagrant/status4.txt
+    restart_loxilbs
+else
+    echo "NOK" > /vagrant/status4.txt
+    echo "sctpmh SCTP Multihoming E2E Multipath Failover [NOK]"
+    echo -e "\nuser"
+    sudo ip netns exec user ip route
+    echo -e "\nr1"
+    sudo ip netns exec r1 ip route
+    echo -e "\nr2"
+    sudo ip netns exec r2 ip route
+    echo -e "\nllb1"
+    sudo ip netns exec llb1 ip route
+    echo -e "\nllb2"
+    sudo ip netns exec llb2 ip route
+    echo -e "\nr3"
+    sudo ip netns exec r3 ip route
+    echo -e "\nr4"
+    sudo ip netns exec r4 ip route
+    echo "-----------------------------"
+
+    echo -e "\nllb1 lb-info"
+    $dexec llb1 loxicmd get lb
+    echo "llb1 ep-info"
+    $dexec llb1 loxicmd get ep
+    echo "-----------------------------"
+    echo -e "\nllb2 lb-info"
+    $dexec llb2 loxicmd get lb
+    echo "llb2 ep-info"
+    $dexec llb2 loxicmd get ep
+    restart_loxilbs
+    exit 1
+fi
+echo -e "------------------------------------------------------------------------------------\n\n\n"
diff --git a/cicd/sctpmh-seagull/validation5.sh b/cicd/sctpmh-seagull/validation5.sh
new file mode 100755
index 000000000..8bb74733d
--- /dev/null
+++ b/cicd/sctpmh-seagull/validation5.sh
@@ -0,0 +1,168 @@
+#!/bin/bash
+source /vagrant/common.sh
+source /vagrant/check_ha.sh
+
+echo -e "sctpmh: SCTP Multihoming - C2LB HA Failover Test. Client and LB Multihomed, EP is uni-homed\n"
+extIP="20.20.20.1"
+port=2020
+
+check_ha
+
+echo "SCTP Multihoming service sctp-lb(Multipath traffic) -> $extIP:$port"
+echo -e "------------------------------------------------------------------------------------\n"
+
+echo -e "\nHA state Master:$master BACKUP-$backup\n"
+
+echo -e "\nTraffic Flow: User -> LB -> EP "
+
+sudo docker exec -dt ep1 ksh -c 'export LD_PRELOAD=/usr/local/bin/libsctplib.so.1.0.8; export LD_LIBRARY_PATH=/usr/local/bin; cd /opt/seagull/diameter-env/run/; timeout 120 stdbuf -oL seagull -conf ../config/conf.server.xml -dico ../config/base_s6a.xml -scen ../scenario/ulr-ula.server.xml > ep1.out' 2>&1 > /dev/null &
+sleep 2
+
+sudo docker exec -dt user ksh -c 'export LD_PRELOAD=/usr/local/bin/libsctplib.so.1.0.8; export LD_LIBRARY_PATH=/usr/local/bin; cd /opt/seagull/diameter-env/run/; timeout 100 stdbuf -oL seagull -conf ../config/conf.client.xml -dico ../config/base_s6a.xml -scen ../scenario/ulr-ula.client.xml > user.out' 2>&1 > /dev/null &
+
+sleep 20
+
+#Path counters
+p1c_old=0
+p1c_new=0
+p2c_old=0
+p2c_new=0
+p3c_old=0
+p3c_new=0
+checkha=0
+hadone=0
+code=0
+nsyncOk=0
+frecover=1
+
+for((i=0;i<15;i++)) do
+    syncOk=$nsyncOk
+    if [[ $checkha == 1 ]]; then
+        check_ha
+        echo -e "\nHA state Master:$master BACKUP-$backup\n"
+        nsyncOk=$(checkSync)
+        if [[ $nsyncOk == 2 ]]; then #No active connections in Master, no need to continue.
+            break;
+        fi
+    fi
+    $dexec user bash -c 'tail -n 25 /opt/seagull/diameter-env/run/user.out'
+    call_new=$(sudo docker exec -t user bash -c 'tail -n 10 /opt/seagull/diameter-env/run/user.out | grep "Successful calls"'| xargs | cut -d '|' -f 4)
+    fail_new=$(sudo docker exec -t user bash -c 'tail -n 10 /opt/seagull/diameter-env/run/user.out | grep "Failed calls"'| xargs | cut -d '|' -f 4)
+ 
+    $dexec $master loxicmd get ct --servName=sctpmh1 
+    echo -e "\n"
+    p1c_new=$(sudo docker exec -i $master loxicmd get ct --servName=sctpmh1 | grep "20.20.20.1 | 1.1.1.1" | xargs | cut -d '|' -f 10)
+    p2c_new=$(sudo docker exec -i $master loxicmd get ct --servName=sctpmh1 | grep "21.21.21.1 | 2.2.2.1" | xargs | cut -d '|' -f 10)
+    p3c_new=$(sudo docker exec -i $master loxicmd get ct --servName=sctpmh1 | grep "22.22.22.1 | 1.1.1.1" | xargs | cut -d '|' -f 10)
+    
+    echo "Counters: $p1c_new $p2c_new $p3c_new"
+    if [[ $p1c_new -gt $p1c_old ]]; then
+        echo "Path 1: 1.1.1.1 -> 20.20.20.1 [ACTIVE]"
+        p1=1
+    else
+        echo "Path 1: 1.1.1.1 -> 20.20.20.1 [NOT ACTIVE]"
+    fi
+
+    if [[ $p2c_new -gt $p2c_old ]]; then
+        echo "Path 2: 2.2.2.1 -> 21.21.21.1 [ACTIVE]"
+        p2=1
+    else
+        echo "Path 2: 2.2.2.1 -> 21.21.21.1 [NOT ACTIVE]"
+    fi
+
+    if [[ $p3c_new -gt $p3c_old ]]; then
+        echo "Path 3: 1.1.1.1 -> 22.22.22.1 [ACTIVE]"
+        p3=1
+    else
+        echo "Path 3: 1.1.1.1 -> 22.22.22.1 [NOT ACTIVE]"
+    fi
+    
+    echo -e "\n"
+	if [[ $recover == 1 ]]; then
+        printf "\t***Setup Recovered***"
+    fi
+    echo -e "\n\n"
+
+    if [[ $fail_new -gt $fail_old && $hadone == 1 && $recover == 0 ]]; then
+	    echo -e "Failed Calls:   \t\t$fail_new \t\t[INCREASING]"
+	    fstart=1
+        frecover=0
+        calls=0
+        code=1
+    else 
+        if [[ $fail_new -eq $fail_old ]]; then
+            if [[ $hadone == 1 ]]; then
+	            printf "Failed Calls:   \t%10s \t[STABLE]\n" $fail_new
+	            frecover=1
+                code=0
+            else
+	            printf "Failed Calls:   \t%10s\n" $fail_new
+	        fi
+
+        fi
+    fi
+
+    if [[ $call_new -gt $call_old ]]; then
+	    printf "Successful Calls: \t%10s \t[ACTIVE]\n" $call_new
+        calls=1
+	    if [[ $hadone == 1 && $frecover == 1 ]]; then
+            recover=1
+	    fi
+    else 
+	    printf "Successful Calls: \t%10s \t[NOT ACTIVE]\n" $call_new
+    fi
+
+    p1c_old=$p1c_new
+    p2c_old=$p1c_new
+    p2c_old=$p1c_new
+    call_old=$call_new
+    fail_old=$fail_new
+
+    if [[ $hadone == 0 ]]; then
+        nsyncOk=$(checkSync)
+        if [[ $nsyncOk == 1 ]]; then
+            restart_mloxilb
+            checkha=1
+            hadone=1
+            calls=0
+        fi
+    fi
+    sleep 5
+done
+
+if [[ $p1 == 1 && $p2 == 1 && $p3 == 1 && $code == 0 && $nsyncOk == 1 && $recover == 1 ]]; then
+    echo "sctpmh SCTP Multihoming C2LB HA Failover [OK]"
+    echo "OK" > /vagrant/status5.txt
+    restart_loxilbs
+else
+    echo "NOK" > /vagrant/status5.txt
+    echo "sctpmh SCTP Multihoming C2LB HA Failover [NOK]"
+    echo -e "\nuser"
+    sudo ip netns exec user ip route
+    echo -e "\nr1"
+    sudo ip netns exec r1 ip route
+    echo -e "\nr2"
+    sudo ip netns exec r2 ip route
+    echo -e "\nllb1"
+    sudo ip netns exec llb1 ip route
+    echo -e "\nllb2"
+    sudo ip netns exec llb2 ip route
+    echo -e "\nr3"
+    sudo ip netns exec r3 ip route
+    echo -e "\nr4"
+    sudo ip netns exec r4 ip route
+    echo "-----------------------------"
+
+    echo -e "\nllb1 lb-info"
+    $dexec llb1 loxicmd get lb
+    echo "llb1 ep-info"
+    $dexec llb1 loxicmd get ep
+    echo -e "\nllb2 lb-info"
+    $dexec llb2 loxicmd get lb
+    echo "llb2 ep-info"
+    $dexec llb2 loxicmd get ep
+    echo "-----------------------------"
+    restart_loxilbs
+    exit 1
+fi
+echo -e "------------------------------------------------------------------------------------\n\n\n"
diff --git a/cicd/sctpmh-seagull/validation6.sh b/cicd/sctpmh-seagull/validation6.sh
new file mode 100755
index 000000000..768d6a485
--- /dev/null
+++ b/cicd/sctpmh-seagull/validation6.sh
@@ -0,0 +1,175 @@
+#!/bin/bash
+source /vagrant/common.sh
+source /vagrant/check_ha.sh
+
+echo -e "sctpmh: SCTP Multihoming - E2E HA Failover Test. Client, LB Multihomed and EP all multi-homed\n"
+extIP="133.133.133.1"
+port=2020
+
+check_ha
+
+echo "SCTP Multihoming service sctp-lb(Multipath traffic) -> $extIP:$port"
+echo -e "------------------------------------------------------------------------------------\n"
+
+echo -e "\nHA state Master:$master BACKUP-$backup\n"
+
+echo -e "\nTraffic Flow: EP ---> LB ---> User"
+
+sudo docker exec -dt user ksh -c 'sed -i 's/source=31.31.31.1/source=0.0.0.0/g' /opt/seagull/diameter-env/config/conf.server.xml'
+
+sudo docker exec -dt user ksh -c 'export LD_PRELOAD=/usr/local/bin/libsctplib.so.1.0.8; export LD_LIBRARY_PATH=/usr/local/bin; cd /opt/seagull/diameter-env/run/; timeout 220 stdbuf -oL seagull -conf ../config/conf.server.xml -dico ../config/base_s6a.xml -scen ../scenario/ulr-ula.server.xml > user.out' 2>&1 > /dev/null &
+sleep 2
+
+sudo docker exec -dt ep1 ksh -c 'sed -i 's/dest=20.20.20.1/dest=133.133.133.1/g' /opt/seagull/diameter-env/config/conf.client.xml'
+sudo docker exec -dt ep1 ksh -c 'export LD_PRELOAD=/usr/local/bin/libsctplib.so.1.0.8; export LD_LIBRARY_PATH=/usr/local/bin; cd /opt/seagull/diameter-env/run/; timeout 200 stdbuf -oL seagull -conf ../config/conf.client.xml -dico ../config/base_s6a.xml -scen ../scenario/ulr-ula.client.xml > ep1.out' 2>&1 > /dev/null &
+
+
+sleep 20
+
+#Path counters
+p1c_old=0
+p1c_new=0
+p2c_old=0
+p2c_new=0
+p3c_old=0
+p3c_new=0
+checkha=0
+hadone=0
+code=0
+nsyncOk=0
+frecover=1
+
+for((i=0;i<15;i++)) do
+    syncOk=$nsyncOk
+    if [[ $checkha == 1 ]]; then
+        check_ha
+        echo -e "\nHA state Master:$master BACKUP-$backup\n"
+        nsyncOk=$(checkSync)
+        if [[ $nsyncOk == 2 ]]; then #No active connections in Master, no need to continue.
+            break;
+        fi
+    fi
+    $dexec ep1 bash -c 'tail -n 25 /opt/seagull/diameter-env/run/ep1.out'
+    call_new=$(sudo docker exec -t ep1 bash -c 'tail -n 10 /opt/seagull/diameter-env/run/ep1.out | grep "Successful calls"'| xargs | cut -d '|' -f 4)
+    fail_new=$(sudo docker exec -t ep1 bash -c 'tail -n 10 /opt/seagull/diameter-env/run/ep1.out | grep "Failed calls"'| xargs | cut -d '|' -f 4)
+    echo -e "\n"
+    $dexec $master loxicmd get ct --servName=sctpmh2
+    echo -e "\n"
+    p1c_new=$(sudo docker exec -i $master loxicmd get ct --servName=sctpmh2 | grep "133.133.133.1 | 31.31.31.1" | xargs | cut -d '|' -f 10)
+    p2c_new=$(sudo docker exec -i $master loxicmd get ct --servName=sctpmh2 | grep "134.134.134.1 | 32.32.32.1" | xargs | cut -d '|' -f 10)
+    p3c_new=$(sudo docker exec -i $master loxicmd get ct --servName=sctpmh2 | grep "135.135.135.1 | 31.31.31.1" | xargs | cut -d '|' -f 10)
+    
+ 
+    echo "Counters: $p1c_new $p2c_new $p3c_new"
+    if [[ $p1c_new -gt $p1c_old ]]; then
+        echo "Path 1: 31.31.31.1 -> 133.133.133.1 -> 1.1.1.1 [ACTIVE]"
+        p1=1
+    else
+        echo "Path 1: 31.31.31.1 -> 133.133.133.1 -> 1.1.1.1 [NOT ACTIVE]"
+    fi
+
+    if [[ $p2c_new -gt $p2c_old ]]; then
+        echo "Path 2: 32.32.32.1 -> 134.134.134.1 -> 2.2.2.1 [ACTIVE]"
+        p2=1
+    else
+        echo "Path 2: 32.32.32.1 -> 134.134.134.1 -> 2.2.2.1 [NOT ACTIVE]"
+    fi
+
+    if [[ $p3c_new -gt $p3c_old ]]; then
+        echo "Path 3: 31.31.31.1 -> 135.135.135.1 -> 1.1.1.1 [ACTIVE]"
+        p3=1
+    else
+        echo "Path 3: 31.31.31.1 -> 135.135.135.1 -> 1.1.1.1 [NOT ACTIVE]"
+    fi
+    echo -e "\n"
+	if [[ $recover == 1 ]]; then
+        printf "\t***Setup Recovered***"
+    fi
+    echo -e "\n\n"
+
+    
+    if [[ $fail_new -gt $fail_old && $hadone == 1 && $recover == 0 ]]; then
+	    echo -e "Failed Calls:   \t\t$fail_new \t\t[INCREASING]"
+	    fstart=1
+        frecover=0
+        calls=0
+        code=1
+    else 
+        if [[ $fail_new -eq $fail_old ]]; then
+            if [[ $hadone == 1 ]]; then
+	            printf "Failed Calls:   \t%10s \t[STABLE]\n" $fail_new
+	            frecover=1
+                code=0
+            else
+	            printf "Failed Calls:   \t%10s\n" $fail_new
+	        fi
+        fi
+    fi
+
+    if [[ $call_new -gt $call_old ]]; then
+	    printf "Successful Calls: \t%10s \t[ACTIVE]\n" $call_new
+        calls=1
+	    if [[ $hadone == 1 && $frecover == 1 ]]; then
+            recover=1
+	    fi
+    else 
+	    printf "Successful Calls: \t%10s \t[NOT ACTIVE]\n" $call_new
+    fi
+
+    p1c_old=$p1c_new
+    p2c_old=$p1c_new
+    p2c_old=$p1c_new
+    call_old=$call_new
+    fail_old=$fail_new
+
+    if [[ $hadone == 0 ]]; then
+        nsyncOk=$(checkSync)
+        if [[ $nsyncOk == 1 ]]; then
+            restart_mloxilb
+            checkha=1
+            hadone=1
+        fi
+    fi
+    sleep 5
+done
+
+#Revert
+sudo docker exec -dt user ksh -c 'sed -i 's/source=0.0.0.0/source=31.31.31.1/g' /opt/seagull/diameter-env/config/conf.server.xml'
+sudo docker exec -dt ep1 ksh -c 'sed -i 's/dest=133.133.133.1/dest=20.20.20.1/g' /opt/seagull/diameter-env/config/conf.client.xml'
+
+if [[ $p1 == 1 && $p2 == 1 && $p3 == 1 && $code == 0 && $nsyncOk == 1 && $recover == 1 ]]; then
+    echo "sctpmh SCTP Multihoming E2E HA Failover [OK]"
+    echo "OK" > /vagrant/status6.txt
+    restart_loxilbs
+else
+    echo "NOK" > /vagrant/status6.txt
+    echo "sctpmh SCTP Multihoming E2E HA Failover [NOK]"
+    echo -e "\nuser"
+    sudo ip netns exec user ip route
+    echo -e "\nr1"
+    sudo ip netns exec r1 ip route
+    echo -e "\nr2"
+    sudo ip netns exec r2 ip route
+    echo -e "\nllb1"
+    sudo ip netns exec llb1 ip route
+    echo -e "\nllb2"
+    sudo ip netns exec llb2 ip route
+    echo -e "\nr3"
+    sudo ip netns exec r3 ip route
+    echo -e "\nr4"
+    sudo ip netns exec r4 ip route
+    echo "-----------------------------"
+
+    echo -e "\nllb1 lb-info"
+    $dexec llb1 loxicmd get lb
+    echo "llb1 ep-info"
+    $dexec llb1 loxicmd get ep
+    echo -e "\nllb2 lb-info"
+    $dexec llb2 loxicmd get lb
+    echo "llb2 ep-info"
+    $dexec llb2 loxicmd get ep
+    echo "-----------------------------"
+    restart_loxilbs
+    exit 1
+fi
+echo -e "------------------------------------------------------------------------------------\n\n\n"

From 3c905f51da1560006f7c1cd69923653ba2a20c0d Mon Sep 17 00:00:00 2001
From: Nikhil Malik <nikhil.malik@netlox.io>
Date: Tue, 10 Sep 2024 17:39:42 +0900
Subject: [PATCH 2/5] gh-87 : sctpmh with sctp_test test suite cicd updated

---
 cicd/sctpmh/check_ha.sh    | 165 ++++++++++++++++++++++++++-----------
 cicd/sctpmh/config.sh      |  43 +++++-----
 cicd/sctpmh/validation.sh  |  83 +++++++++++--------
 cicd/sctpmh/validation1.sh |   9 +-
 cicd/sctpmh/validation2.sh |   6 +-
 cicd/sctpmh/validation3.sh |   6 +-
 cicd/sctpmh/validation4.sh |   8 +-
 cicd/sctpmh/validation5.sh |  38 +++------
 cicd/sctpmh/validation6.sh | 140 +++++++++++++++++++++++++++++++
 9 files changed, 363 insertions(+), 135 deletions(-)
 create mode 100755 cicd/sctpmh/validation6.sh

diff --git a/cicd/sctpmh/check_ha.sh b/cicd/sctpmh/check_ha.sh
index b04922194..b31574fb0 100644
--- a/cicd/sctpmh/check_ha.sh
+++ b/cicd/sctpmh/check_ha.sh
@@ -4,62 +4,131 @@ master="llb1"
 backup="llb2"
 
 function check_ha() {
-while : ; do
-    status1=$($hexec llb1 curl -sX 'GET' 'http://0.0.0.0:11111/netlox/v1/config/cistate/all' -H 'accept: application/json' | jq -r '.Attr[0].state')
-    status2=$($hexec llb2 curl -sX 'GET' 'http://0.0.0.0:11111/netlox/v1/config/cistate/all' -H 'accept: application/json' | jq -r '.Attr[0].state')
-    count=0
-    if [[ $status1 == "MASTER" && $status2 == "BACKUP" ]];
-    then
-        master="llb1"
-        backup="llb2"
-        break
-    elif [[ $status2 == "MASTER" && $status1 == "BACKUP" ]]; 
-    then
-        master="llb2"
-        backup="llb1"
-        break
-    else
-        count=$(( $count + 1 ))
-        if [[ $count -ge 20 ]]; then
+    while : ; do
+        status1=$($hexec llb1 curl -sX 'GET' 'http://0.0.0.0:11111/netlox/v1/config/cistate/all' -H 'accept: application/json' | jq -r '.Attr[0].state')
+        status2=$($hexec llb2 curl -sX 'GET' 'http://0.0.0.0:11111/netlox/v1/config/cistate/all' -H 'accept: application/json' | jq -r '.Attr[0].state')
+        count=0
+        if [[ $status1 == "MASTER" && $status2 == "BACKUP" ]];
+        then
+            master="llb1"
+            backup="llb2"
+            break
+        elif [[ $status2 == "MASTER" && $status1 == "BACKUP" ]]; 
+        then
+            master="llb2"
+            backup="llb1"
+            break
+        else
+            count=$(( $count + 1 ))
+            if [[ $count -ge 20 ]]; then
+                echo "KA llb1-$status1, llb2-$status2 [NOK] - Exiting" >&2
+                exit 1;
+            fi
             echo "KA llb1-$status1, llb2-$status2 [NOK]" >&2
-            exit 1;
+            sleep 5
         fi
-        sleep 5
-    fi
-done
+    done
 }
 
 function checkSync() {
-count=1
-sync=0
-while [[ $count -le 5 ]] ; do
-echo -e "\nStatus at MASTER:$master\n" >&2
-$dexec $master loxicmd get ct | grep est >&2
+    count=1
+    sync=0
+    while [[ $count -le 5 ]] ; do
+        echo -e "\nStatus at MASTER:$master\n" >&2
+        ct=`$dexec $master loxicmd get ct | grep est`
+        echo "${ct//'\n'/$'\n'}" >&2
 
-echo -e "\nStatus at BACKUP:$backup\n" >&2
-$dexec $backup loxicmd get ct | grep est >&2
+        echo -e "\nStatus at BACKUP:$backup\n" >&2
+        ct=`$dexec $backup loxicmd get ct | grep est`
+        echo "${ct//'\n'/$'\n'}" >&2
 
-nres1=$($hexec $master curl -sX 'GET' 'http://0.0.0.0:11111/netlox/v1/config/conntrack/all' -H 'accept: application/json' | grep -ow "\"conntrackState\":\"est\"" | wc -l)
-nres2=$($hexec $backup curl -sX 'GET' 'http://0.0.0.0:11111/netlox/v1/config/conntrack/all' -H 'accept: application/json' | grep -ow "\"conntrackState\":\"est\"" | wc -l)
+        nres1=$($hexec $master curl -sX 'GET' 'http://0.0.0.0:11111/netlox/v1/config/conntrack/all' -H 'accept: application/json' | grep -ow "\"conntrackState\":\"est\"" | wc -l)
+        nres2=$($hexec $backup curl -sX 'GET' 'http://0.0.0.0:11111/netlox/v1/config/conntrack/all' -H 'accept: application/json' | grep -ow "\"conntrackState\":\"est\"" | wc -l)
 
-if [[ $nres1 == 0 ]]; then
-    echo -e "No active connections in Master:$master. Exiting!" >&2
-    return 2
-fi
+        if [[ $nres1 == 0 ]]; then
+            echo -e "No active connections in Master:$master. Exiting!" >&2
+            return 2
+        fi
 
-if [[ $nres1 == $nres2 && $nres1 != 0 ]]; then
-    echo -e "\nConnections sync successful!!!\n" >&2
-    sync=1
-    break;
-fi
-echo -e "\nConnections sync pending.. Let's wait a little more..\n" >&2
-count=$(( $count + 1 ))
-sleep 2
-done
+        if [[ $nres1 == $nres2 && $nres1 != 0 ]]; then
+            echo -e "\nConnections sync successful!!!\n" >&2
+            sync=1
+            break;
+        fi
+        echo -e "\nConnections sync pending.. Let's wait a little more..\n" >&2
+        count=$(( $count + 1 ))
+        sleep 2
+    done
 
-if [[ $sync == 0 ]]; then
-    echo -e "\nConnection Sync failed\n" >&2
-    return 0
-fi
-echo "$sync"
+    if [[ $sync == 0 ]]; then
+        echo -e "\nConnection Sync failed\n" >&2
+        return 0
+    fi
+    echo "$sync"
 }
+
+function restart_mloxilb() {
+    if [[ $master == "llb1" ]]; then
+        pat="cluster=172.17.0.3"
+        copts=" --cluster=172.17.0.3"
+        self=" --self=0"
+        ka=" --ka=172.17.0.3:172.17.0.2"
+    else
+        pat="cluster=172.17.0.2"
+        copts=" --cluster=172.17.0.2"
+        self=" --self=1"
+        ka=" --ka=172.17.0.2:172.17.0.3"
+    fi
+    echo "Restarting MASTER: $master"
+    pid=$(docker exec -i $master ps -aef | grep $pat | xargs | cut -d ' ' -f 2)
+    echo "Killing $pid" >&2
+    docker exec -dt $master kill -9 $pid
+    docker exec -dt $master ip link del llb0
+    docker exec -dt $master nohup /root/loxilb-io/loxilb/loxilb $copts $self $ka > /dev/null &
+    pid=$(docker exec -i $master ps -aef | grep $pat | xargs | cut -d ' ' -f 2)
+    echo "New loxilb pid: $pid" >&2
+}
+
+function restart_loxilbs() {
+    if [[ $master == "llb1" ]]; then
+        mpat="cluster=172.17.0.3"
+        mcopts=" --cluster=172.17.0.3"
+        mself=" --self=0"
+        mka=" --ka=172.17.0.3:172.17.0.2"
+        
+        bpat="cluster=172.17.0.2"
+        bcopts=" --cluster=172.17.0.2"
+        bself=" --self=1"
+        bka=" --ka=172.17.0.2:172.17.0.3"
+    else
+        mpat="cluster=172.17.0.2"
+        mcopts=" --cluster=172.17.0.2"
+        mself=" --self=1"
+        mka=" --ka=172.17.0.2:172.17.0.3"
+        
+        bpat="cluster=172.17.0.3"
+        bcopts=" --cluster=172.17.0.3"
+        bself=" --self=0"
+        bka=" --ka=172.17.0.3:172.17.0.2"
+    fi
+    echo "Restarting $master"
+    pid=$(docker exec -i $master ps -aef | grep $mpat | xargs | cut -d ' ' -f 2)
+    echo "Killing $mpid" >&2
+    docker exec -dt $master kill -9 $pid
+    docker exec -dt $master ip link del llb0
+    docker exec -dt $master nohup /root/loxilb-io/loxilb/loxilb $mcopts $mself $mka > /dev/null &
+    pid=$(docker exec -i $master ps -aef | grep $mpat | xargs | cut -d ' ' -f 2)
+    echo "New loxilb pid: $pid" >&2
+
+    echo "Restarting $backup"
+    pid=$(docker exec -i $backup ps -aef | grep $bpat | xargs | cut -d ' ' -f 2)
+    echo "Killing $pid" >&2
+    docker exec -dt $backup kill -9 $pid
+    docker exec -dt $backup ip link del llb0
+    docker exec -dt $backup nohup /root/loxilb-io/loxilb/loxilb $bcopts $bself $bka > /dev/null &
+    pid=$(docker exec -i $backup ps -aef | grep $bpat | xargs | cut -d ' ' -f 2)
+    echo "New loxilb pid: $pid" >&2
+
+}
+
+
diff --git a/cicd/sctpmh/config.sh b/cicd/sctpmh/config.sh
index 411d4e5d4..2436deedb 100755
--- a/cicd/sctpmh/config.sh
+++ b/cicd/sctpmh/config.sh
@@ -21,18 +21,18 @@ echo "#########################################"
 echo "Connecting and configuring  hosts"
 echo "#########################################"
 
-connect_docker_hosts user r1
-connect_docker_hosts user r2
-connect_docker_hosts r1 sw1
-connect_docker_hosts r2 sw1
-connect_docker_hosts sw1 llb1
-connect_docker_hosts sw1 llb2
-connect_docker_hosts llb1 sw2
-connect_docker_hosts llb2 sw2
-connect_docker_hosts sw2 r3
-connect_docker_hosts sw2 r4
-connect_docker_hosts r3 ep1
-connect_docker_hosts r4 ep1
+connect_docker_hosts user r1 1500
+connect_docker_hosts user r2 1500
+connect_docker_hosts r1 sw1 1500
+connect_docker_hosts r2 sw1 1500
+connect_docker_hosts sw1 llb1 1500
+connect_docker_hosts sw1 llb2 1500
+connect_docker_hosts llb1 sw2 1500
+connect_docker_hosts llb2 sw2 1500
+connect_docker_hosts sw2 r3 1500
+connect_docker_hosts sw2 r4 1500
+connect_docker_hosts r3 ep1 1500
+connect_docker_hosts r4 ep1 1500
 
 create_docker_host_cnbridge --host1 sw1 --host2 llb1
 create_docker_host_cnbridge --host1 sw1 --host2 llb2
@@ -79,14 +79,15 @@ $hexec ep1 ip route change default via 31.31.31.254
 
 # Backup paths in user
 $hexec user ip route add 124.124.124.1/32 via 2.2.2.254
-$hexec user ip route add 125.125.125.1/32 via 2.2.2.254
+#$hexec user ip route add 125.125.125.1/32 via 2.2.2.254
+#$hexec user ip route add 32.32.32.1/32 via 2.2.2.254
 $hexec user ip route add 134.134.134.1/32 via 2.2.2.254
-$hexec user ip route add 135.135.135.1/32 via 2.2.2.254
+#$hexec user ip route add 135.135.135.1/32 via 2.2.2.254
 
-$hexec ep1 ip route add 124.124.124.1/32 via 32.32.32.254
-$hexec ep1 ip route add 125.125.125.1/32 via 32.32.32.254
+#$hexec ep1 ip route add 124.124.124.1/32 via 32.32.32.254
+#$hexec ep1 ip route add 125.125.125.1/32 via 31.31.31.254
 $hexec ep1 ip route add 134.134.134.1/32 via 32.32.32.254
-$hexec ep1 ip route add 135.135.135.1/32 via 32.32.32.254
+$hexec ep1 ip route add 135.135.135.1/32 via 31.31.31.254
 
 $hexec llb1 ip route add 1.1.1.0/24 via 11.11.11.253
 $hexec llb1 ip route add 2.2.2.0/24 via 11.11.11.254
@@ -107,10 +108,10 @@ create_lb_rule llb2 123.123.123.1 --name=sctpmh1 --secips=124.124.124.1,125.125.
 create_lb_rule llb1 133.133.133.1 --name=sctpmh2 --secips=134.134.134.1,135.135.135.1 --sctp=2020:9999 --endpoints=1.1.1.1:1 --mode=fullnat
 create_lb_rule llb2 133.133.133.1 --name=sctpmh2 --secips=134.134.134.1,135.135.135.1 --sctp=2020:9999 --endpoints=1.1.1.1:1 --mode=fullnat
 
-$dexec llb1 loxicmd create ep 1.1.1.1 --name=1.1.1.1_sctp_9999 --probetype=none
-$dexec llb1 loxicmd create ep 31.31.31.1 --name=31.31.31.1_sctp_9999 --probetype=none
-$dexec llb2 loxicmd create ep 1.1.1.1 --name=1.1.1.1_sctp_9999 --probetype=none
-$dexec llb2 loxicmd create ep 31.31.31.1 --name=31.31.31.1_sctp_9999 --probetype=none
+$dexec llb1 loxicmd create ep 1.1.1.1 --name=1.1.1.1_sctp_8080 --probetype=ping
+$dexec llb1 loxicmd create ep 31.31.31.1 --name=31.31.31.1_sctp_8080 --probetype=ping
+$dexec llb2 loxicmd create ep 1.1.1.1 --name=1.1.1.1_sctp_8080 --probetype=ping
+$dexec llb2 loxicmd create ep 31.31.31.1 --name=31.31.31.1_sctp_8080 --probetype=ping
 
 
 create_lb_rule llb1 11.11.11.11 --tcp=80:8080 --endpoints=31.31.31.1:1
diff --git a/cicd/sctpmh/validation.sh b/cicd/sctpmh/validation.sh
index 34cd2749d..8a62cfff2 100755
--- a/cicd/sctpmh/validation.sh
+++ b/cicd/sctpmh/validation.sh
@@ -1,40 +1,55 @@
 #!/bin/bash
 code=0
-echo "SCTP Multihoming - Test case #1"
-echo -e "*********************************************************************************"
-./validation1.sh
-if [[ $? == 1 ]]; then
-    code=1
-fi
-echo -e "\n\n\nSCTP Multihoming - Test case #2"
-echo -e "*********************************************************************************"
-./validation2.sh
-if [[ $? == 1 ]]; then
-    code=1
-fi
-echo -e "\n\n\nSCTP Multihoming - Test case #3"
-echo -e "*********************************************************************************"
-./validation3.sh
-if [[ $? == 1 ]]; then
-    code=1
-fi
-echo -e "\n\n\nSCTP Multihoming - Test case #4"
-echo -e "*********************************************************************************"
-./validation4.sh
-if [[ $? == 1 ]]; then
-    code=1
-fi
-echo -e "\n\n\nSCTP Multihoming - Test case #5"
-echo -e "*********************************************************************************"
-sleep 60
-./validation5.sh
-if [[ $? == 1 ]]; then
-    code=1
-fi
-echo -e "\n\n\n*********************************************************************************"
+tc=( "Basic Test - Client & EP Uni-homed and LB is Multi-homed" "Multipath Test, Client and LB Multihomed, EP is uni-homed" "C2LB Multipath Failover Test - Client and LB Multihomed, EP is uni-homed" "E2E Multipath Failover Test - Client, LB and EP all Multihomed" "C2LB HA Failover Test - Client and LB Multihomed, EP is uni-homed" "E2E HA Failover Test. Client, LB and EP all Multihomed" )
+padding="............................................................................................................."
+border="**************************************************************************************************************************************************"
+
+for((j=0,i=1; i<=6; i++, j++)); do
+    echo "SCTP Multihoming - Test case #$i"
+    echo -e "\n\n\n$border\n"
+    ./validation$i.sh
+    echo -e "\n\n"
+    file=status$i.txt
+    status=`cat $file`
+    title=${tc[j]}
+    echo -e "\n\n"
+
+    if [[ $status == "NOK" ]]; then
+        code=1
+        printf "Test case #%2s - %s%s %s\n" "$i" "$title" "${padding:${#title}}" "[FAILED]";
+    else
+        printf "Test case #%2s - %s%s %s\n" "$i" "$title" "${padding:${#title}}" "[PASSED]";
+    fi
+    echo -e "\n\n\n$border\n\n"
+
+    sleep 30
+done
+
+echo -e "\n\n\n$border\n"
+printf "================================================== SCTP MULTIHOMING CONSOLIDATED RESULT ==========================================================\n"
+for((j=0,i=1; i<=6; i++, j++)); do
+    file=status$i.txt
+    status=`cat $file`
+    title=${tc[j]}
+    echo -e "\n\n"
+
+    if [[ $status == "NOK" ]]; then
+        code=1
+        printf "Test case #%2s - %s%s %s\n" "$i" "$title" "${padding:${#title}}" "[FAILED]";
+    else
+        printf "Test case #%2s - %s%s %s\n" "$i" "$title" "${padding:${#title}}" "[PASSED]";
+    fi
+done
+
+echo -e "\n$border"
+
+echo -e "\n\n\n$border\n"
 if [[ $code == 0 ]]; then
-    echo -e "\n\n SCTP Multihoming CICD [OK]"
+    echo -e "SCTP Multihoming with sctp_test CICD [OK]"
 else
-    echo -e "\n\n SCTP Multihoming CICD [NOK]"
+    echo -e "SCTP Multihoming with sctp_test CICD [NOK]"
 fi
+echo -e "\n$border\n"
+
+sudo rm -rf statu*.txt
 exit $code
diff --git a/cicd/sctpmh/validation1.sh b/cicd/sctpmh/validation1.sh
index 6043bf114..f41fffce4 100755
--- a/cicd/sctpmh/validation1.sh
+++ b/cicd/sctpmh/validation1.sh
@@ -1,10 +1,13 @@
 #!/bin/bash
 source ../common.sh
+source check_ha.sh
 
 echo -e "sctpmh: SCTP Multihoming Basic Test - Client & EP Uni-homed and LB is Multi-homed\n"
 extIP="123.123.123.1"
 port=2020
 
+check_ha
+
 echo "SCTP Multihoming service sctp-lb -> $extIP:$port"
 echo -e "------------------------------------------------------------------------------------\n"
 
@@ -26,7 +29,10 @@ sudo pkill sctp_darn
 if [[ "$res" == "$exp" ]]; then
     echo $res
     echo -e "\nsctpmh SCTP Multihoming service Basic Test [OK]\n"
+    echo "OK" > status1.txt
+    restart_loxilbs
 else
+    echo "NOK" > status1.txt
     echo "sctpmh SCTP Multihoming service Basic Test [NOK]"
     echo "Expected : $exp"
     echo "Received : $res"
@@ -51,11 +57,12 @@ else
     echo "llb1 ep-info"
     $dexec llb1 loxicmd get ep
     echo "llb1 bpf-info"
-    $dexec llb1 ntc filter show dev eth0 ingress
+    $dexec llb1 tc filter show dev eth0 ingress
     echo "BFP trace -- "
     sudo timeout 5 cat  /sys/kernel/debug/tracing/trace_pipe
     sudo killall -9 cat
     echo "BFP trace -- "
+    restart_loxilbs
     exit 1
 fi
 echo -e "------------------------------------------------------------------------------------\n\n\n"
diff --git a/cicd/sctpmh/validation2.sh b/cicd/sctpmh/validation2.sh
index c9dbfd192..3829422b0 100755
--- a/cicd/sctpmh/validation2.sh
+++ b/cicd/sctpmh/validation2.sh
@@ -12,7 +12,7 @@ echo -e "-----------------------------------------------------------------------
 
 echo -e "\nHA state Master:$master BACKUP-$backup\n"
 
-$hexec ep1 sctp_test -H 0.0.0.0  -P 9999 -l > ep1.out &
+$hexec ep1 sctp_test -H 31.31.31.1  -P 9999 -l > ep1.out &
 sleep 2
 
 $hexec user stdbuf -oL sctp_test -H 1.1.1.1 -B 2.2.2.1 -P 20000 -h $extIP -p $port -s -m 100 -x 50000 > user.out &
@@ -72,7 +72,10 @@ sudo pkill sctp_test
 sudo rm *.out
 if [[ $fin == 1 && $p1 == 1 && $p2 == 1 && $p3 == 1 ]]; then
     echo "sctpmh SCTP Multihoming Multipath [OK]"
+    echo "OK" > status2.txt
+    restart_loxilbs
 else
+    echo "NOK" > status2.txt
     echo "sctpmh SCTP Multihoming Multipath [NOK]"
     echo -e "\nuser"
     sudo ip netns exec user ip route
@@ -99,6 +102,7 @@ else
     $dexec llb2 loxicmd get lb
     echo "llb2 ep-info"
     $dexec llb2 loxicmd get ep
+    restart_loxilbs
     exit 1
 fi
 echo -e "------------------------------------------------------------------------------------\n\n\n"
diff --git a/cicd/sctpmh/validation3.sh b/cicd/sctpmh/validation3.sh
index 9231b03d0..f2d3a8939 100755
--- a/cicd/sctpmh/validation3.sh
+++ b/cicd/sctpmh/validation3.sh
@@ -15,7 +15,7 @@ echo -e "\nHA state Master:$master BACKUP-$backup\n"
 
 echo -e "\nTraffic Flow: User -> LB -> EP "
 
-$hexec ep1 sctp_test -H 0.0.0.0  -P 9999 -l > ep1.out &
+$hexec ep1 sctp_test -H 31.31.31.1  -P 9999 -l > ep1.out &
 sleep 2
 
 $hexec user stdbuf -oL sctp_test -H 1.1.1.1 -B 2.2.2.1 -P 20000 -h $extIP -p $port -s -m 100 -x 50000 > user.out &
@@ -92,7 +92,10 @@ $hexec user ip route add default via 1.1.1.254
 
 if [[ $fin == 1 && $p1 == 1 && $p2 == 1 && $p3 == 1 && $code == 0 ]]; then
     echo "sctpmh SCTP Multihoming Multipath Failover [OK]"
+    echo "OK" > status3.txt
+    restart_loxilbs
 else
+    echo "NOK" > status3.txt
     echo "sctpmh SCTP Multihoming Multipath Failover [NOK]"
     echo -e "\nuser"
     sudo ip netns exec user ip route
@@ -119,6 +122,7 @@ else
     echo "llb2 ep-info"
     $dexec llb2 loxicmd get ep
     echo "-----------------------------"
+    restart_loxilbs
     exit 1
 fi
 echo -e "------------------------------------------------------------------------------------\n\n\n"
diff --git a/cicd/sctpmh/validation4.sh b/cicd/sctpmh/validation4.sh
index b5ce09f19..93f76e10a 100755
--- a/cicd/sctpmh/validation4.sh
+++ b/cicd/sctpmh/validation4.sh
@@ -1,7 +1,7 @@
 #!/bin/bash
 source ../common.sh
 source check_ha.sh
-echo -e "sctpmh: SCTP Multihoming - Multipath Failover Test. Client, LB and EP all Multihomed\n"
+echo -e "sctpmh: SCTP Multihoming - E2E Multipath Failover Test. Client, LB and EP all Multihomed\n"
 extIP="133.133.133.1"
 port=2020
 
@@ -13,7 +13,7 @@ echo -e "-----------------------------------------------------------------------
 echo -e "\nHA state Master:$master BACKUP-$backup\n"
 echo -e "\nTraffic Flow: EP ---> LB ---> User"
 
-$hexec user sctp_test -H 1.1.1.1 -B 2.2.2.1  -P 9999 -l > user.out &
+$hexec user sctp_test -H 0.0.0.0  -P 9999 -l > user.out &
 sleep 2
 
 $hexec ep1 stdbuf -oL sctp_test -H 31.31.31.1 -B 32.32.32.1 -P 20000 -h $extIP -p $port -s -m 100 -x 50000 > ep1.out &
@@ -91,7 +91,10 @@ $hexec user ip route add default via 1.1.1.254
 
 if [[ $fin == 1 && $p1 == 1 && $p2 == 1 && $p3 == 1 && $code == 0 ]]; then
     echo "sctpmh SCTP Multihoming E2E Multipath Failover [OK]"
+    echo "OK" > status4.txt
+    restart_loxilbs
 else
+    echo "NOK" > status4.txt
     echo "sctpmh SCTP Multihoming E2E Multipath Failover [NOK]"
     echo -e "\nuser"
     sudo ip netns exec user ip route
@@ -118,6 +121,7 @@ else
     $dexec llb2 loxicmd get lb
     echo "llb2 ep-info"
     $dexec llb2 loxicmd get ep
+    restart_loxilbs
     exit 1
 fi
 echo -e "------------------------------------------------------------------------------------\n\n\n"
diff --git a/cicd/sctpmh/validation5.sh b/cicd/sctpmh/validation5.sh
index a2d52bc61..61d4a40bd 100755
--- a/cicd/sctpmh/validation5.sh
+++ b/cicd/sctpmh/validation5.sh
@@ -14,11 +14,12 @@ echo -e "-----------------------------------------------------------------------
 echo -e "\nHA state Master:$master BACKUP-$backup\n"
 
 echo -e "\nTraffic Flow: User -> LB -> EP "
+sudo pkill sctp_test
 
-$hexec ep1 sctp_test -H 0.0.0.0  -P 9999 -l > ep1.out &
+$hexec ep1 sctp_test -H 31.31.31.1  -P 9999 -l > ep1.out &
 sleep 2
 
-$hexec user stdbuf -oL sctp_test -H 1.1.1.1 -B 2.2.2.1 -P 20000 -h $extIP -p $port -s -m 100 -x 200000 > user.out &
+$hexec user stdbuf -oL sctp_test -H 1.1.1.1 -B 2.2.2.1 -P 20000 -h $extIP -p $port -s -m 1400 -x 300000 > user.out &
 
 #Path counters
 p1c_old=0
@@ -32,29 +33,8 @@ hadone=0
 code=0
 nsyncOk=0
 
-function restart_mloxilb() {
-    if [[ $master == "llb1" ]]; then
-        pat="cluster=172.17.0.3"
-        copts=" --cluster=172.17.0.3"
-        self=" --self=0"
-        ka=" --ka=172.17.0.3:172.17.0.2"
-    else
-        pat="cluster=172.17.0.2"
-        copts=" --cluster=172.17.0.2"
-        self=" --self=1"
-        ka=" --ka=172.17.0.2:172.17.0.3"
-    fi
-    pid=$(docker exec -i $master ps -aef | grep $pat | xargs | cut -d ' ' -f 2)
-    echo Killing $pid >&2
-    docker exec -dt $master kill -9 $pid
-    docker exec -dt $master ip link del llb0
-    docker exec -dt $master nohup /root/loxilb-io/loxilb/loxilb $copts $self $ka > /dev/null &
-    pid=$(docker exec -i $master ps -aef | grep $pat | xargs | cut -d ' ' -f 2)
-    echo "New loxilb pid: $pid" >&2
-}
-
 for((i=0;i<200;i++)) do
-    fin=`tail -n 100 user.out | grep "Client: Sending packets.(200000/200000)"`
+    fin=`tail -n 100 user.out | grep "Client: Sending packets.(300000/300000)"`
     if [[ ! -z $fin ]]; then
         fin=1
         echo "sctp_test done."
@@ -65,7 +45,7 @@ for((i=0;i<200;i++)) do
         check_ha
         echo -e "\nHA state Master:$master BACKUP-$backup\n"
         nsyncOk=$(checkSync)
-        if [[ $nsyncOk == 2 ]]; then
+        if [[ $nsyncOk == 2 ]]; then #No active connections in Master, no need to continue.
             break;
         fi
     fi
@@ -115,9 +95,12 @@ sudo rm -rf *.out
 sudo pkill sctp_test
 
 if [[ $fin == 1 && $p1 == 1 && $p2 == 1 && $p3 == 1 && $code == 0 && $syncOk == 1 ]]; then
-    echo "sctpmh SCTP Multihoming HA Failover [OK]"
+    echo "sctpmh SCTP Multihoming C2LB HA Failover [OK]"
+    echo "OK" > status5.txt
+    restart_loxilbs
 else
-    echo "sctpmh SCTP Multihoming HA Failover [NOK]"
+    echo "NOK" > status5.txt
+    echo "sctpmh SCTP Multihoming C2LB HA Failover [NOK]"
     echo -e "\nuser"
     sudo ip netns exec user ip route
     echo -e "\nr1"
@@ -143,6 +126,7 @@ else
     echo "llb2 ep-info"
     $dexec llb2 loxicmd get ep
     echo "-----------------------------"
+    restart_loxilbs
     exit 1
 fi
 echo -e "------------------------------------------------------------------------------------\n\n\n"
diff --git a/cicd/sctpmh/validation6.sh b/cicd/sctpmh/validation6.sh
new file mode 100755
index 000000000..bbccecd3a
--- /dev/null
+++ b/cicd/sctpmh/validation6.sh
@@ -0,0 +1,140 @@
+#!/bin/bash
+source ../common.sh
+source check_ha.sh
+
+echo -e "sctpmh: SCTP Multihoming - E2E HA Failover Test. Client, LB and EP all Multi-homed\n"
+extIP="133.133.133.1"
+port=2020
+
+check_ha
+
+echo "SCTP Multihoming service sctp-lb(Multipath traffic) -> $extIP:$port"
+echo -e "------------------------------------------------------------------------------------\n"
+
+echo -e "\nHA state Master:$master BACKUP-$backup\n"
+
+echo -e "\nTraffic Flow: EP ---> LB ---> User"
+
+sudo pkill sctp_test
+
+#$hexec user sctp_test -H 1.1.1.1 -B 2.2.2.1  -P 9999 -l > user.out &
+$hexec user sctp_test -H 0.0.0.0  -P 9999 -l > user.out &
+sleep 2
+
+$hexec ep1 stdbuf -oL sctp_test -H 31.31.31.1 -B 32.32.32.1 -P 20000 -h $extIP -p $port -s -m 1400 -x 500000 > ep1.out &
+
+#Path counters
+p1c_old=0
+p1c_new=0
+p2c_old=0
+p2c_new=0
+p3c_old=0
+p3c_new=0
+checkha=0
+hadone=0
+code=0
+nsyncOk=0
+
+for((i=0;i<200;i++)) do
+    fin=`tail -n 100 ep1.out | grep "Client: Sending packets.(500000/500000)"`
+    if [[ ! -z $fin ]]; then
+        fin=1
+        echo "sctp_test done."
+        break;
+    fi
+
+    syncOk=$nsyncOk
+    if [[ $checkha == 1 ]]; then
+        check_ha
+        echo -e "\nHA state Master:$master BACKUP-$backup\n"
+        nsyncOk=$(checkSync)
+        if [[ $nsyncOk == 2 ]]; then #No active connections in Master, no need to continue.
+            break;
+        fi
+    fi
+    echo -e "\n"
+    $dexec $master loxicmd get ct --servName=sctpmh2
+    echo -e "\n"
+    p1c_new=$(sudo docker exec -i $master loxicmd get ct --servName=sctpmh2 | grep "133.133.133.1 | 31.31.31.1" | xargs | cut -d '|' -f 10)
+    p2c_new=$(sudo docker exec -i $master loxicmd get ct --servName=sctpmh2 | grep "134.134.134.1 | 32.32.32.1" | xargs | cut -d '|' -f 10)
+    p3c_new=$(sudo docker exec -i $master loxicmd get ct --servName=sctpmh2 | grep "135.135.135.1 | 31.31.31.1" | xargs | cut -d '|' -f 10)
+    
+ 
+    echo "Counters: $p1c_new $p2c_new $p3c_new"
+    if [[ $p1c_new -gt $p1c_old ]]; then
+        echo "Path 1: 31.31.31.1 -> 133.133.133.1 -> 1.1.1.1 [ACTIVE]"
+        p1=1
+    else
+        echo "Path 1: 31.31.31.1 -> 133.133.133.1 -> 1.1.1.1 [NOT ACTIVE]"
+    fi
+
+    if [[ $p2c_new -gt $p2c_old ]]; then
+        echo "Path 2: 32.32.32.1 -> 134.134.134.1 -> 2.2.2.1 [ACTIVE]"
+        p2=1
+    else
+        echo "Path 2: 32.32.32.1 -> 134.134.134.1 -> 2.2.2.1 [NOT ACTIVE]"
+    fi
+
+    if [[ $p3c_new -gt $p3c_old ]]; then
+        echo "Path 3: 31.31.31.1 -> 135.135.135.1 -> 1.1.1.1 [ACTIVE]"
+        p3=1
+    else
+        echo "Path 3: 31.31.31.1 -> 135.135.135.1 -> 1.1.1.1 [NOT ACTIVE]"
+    fi
+    echo -e "\n"
+    
+    p1c_old=$p1c_new
+    p2c_old=$p1c_new
+    p2c_old=$p1c_new
+
+    if [[ $hadone == 0 ]]; then
+        nsyncOk=$(checkSync)
+        if [[ $nsyncOk == 1 ]]; then
+            restart_mloxilb
+            checkha=1
+            hadone=1
+        fi
+    fi
+    sleep 5
+done
+
+
+sudo rm -rf *.out
+sudo pkill sctp_test
+
+if [[ $fin == 1 && $p1 == 1 && $p2 == 1 && $p3 == 1 && $code == 0 && $nsyncOk == 1 ]]; then
+    echo "sctpmh SCTP Multihoming E2E HA Failover [OK]"
+    echo "OK" > status6.txt
+    restart_loxilbs
+else
+    echo "NOK" > status6.txt
+    echo "sctpmh SCTP Multihoming E2E HA Failover [NOK]"
+    echo -e "\nuser"
+    sudo ip netns exec user ip route
+    echo -e "\nr1"
+    sudo ip netns exec r1 ip route
+    echo -e "\nr2"
+    sudo ip netns exec r2 ip route
+    echo -e "\nllb1"
+    sudo ip netns exec llb1 ip route
+    echo -e "\nllb2"
+    sudo ip netns exec llb2 ip route
+    echo -e "\nr3"
+    sudo ip netns exec r3 ip route
+    echo -e "\nr4"
+    sudo ip netns exec r4 ip route
+    echo "-----------------------------"
+
+    echo -e "\nllb1 lb-info"
+    $dexec llb1 loxicmd get lb
+    echo "llb1 ep-info"
+    $dexec llb1 loxicmd get ep
+    echo -e "\nllb2 lb-info"
+    $dexec llb2 loxicmd get lb
+    echo "llb2 ep-info"
+    $dexec llb2 loxicmd get ep
+    echo "-----------------------------"
+    restart_loxilbs
+    exit 1
+fi
+echo -e "------------------------------------------------------------------------------------\n\n\n"

From b1f225d4e67adeb992276aaf838ea04818cfc852 Mon Sep 17 00:00:00 2001
From: Nikhil Malik <nikhil.malik@netlox.io>
Date: Wed, 11 Sep 2024 11:04:44 +0900
Subject: [PATCH 3/5] gh-87 : sctpmh with sctp_test test suite cicd updated for
 random size packet test

---
 cicd/sctpmh-seagull/check_ha.sh    |  4 ++--
 cicd/sctpmh-seagull/common.sh      | 14 +++++++++++---
 cicd/sctpmh-seagull/validation.sh  |  6 +++---
 cicd/sctpmh-seagull/validation1.sh |  2 +-
 cicd/sctpmh/config.sh              | 24 ++++++++++++------------
 cicd/sctpmh/validation2.sh         |  4 ++--
 cicd/sctpmh/validation3.sh         |  7 +++++--
 cicd/sctpmh/validation4.sh         |  6 ++++--
 cicd/sctpmh/validation5.sh         |  6 +++---
 cicd/sctpmh/validation6.sh         |  6 +++---
 10 files changed, 46 insertions(+), 33 deletions(-)

diff --git a/cicd/sctpmh-seagull/check_ha.sh b/cicd/sctpmh-seagull/check_ha.sh
index f06e85953..b31574fb0 100644
--- a/cicd/sctpmh-seagull/check_ha.sh
+++ b/cicd/sctpmh-seagull/check_ha.sh
@@ -21,9 +21,10 @@ function check_ha() {
         else
             count=$(( $count + 1 ))
             if [[ $count -ge 20 ]]; then
-                echo "KA llb1-$status1, llb2-$status2 [NOK]" >&2
+                echo "KA llb1-$status1, llb2-$status2 [NOK] - Exiting" >&2
                 exit 1;
             fi
+            echo "KA llb1-$status1, llb2-$status2 [NOK]" >&2
             sleep 5
         fi
     done
@@ -34,7 +35,6 @@ function checkSync() {
     sync=0
     while [[ $count -le 5 ]] ; do
         echo -e "\nStatus at MASTER:$master\n" >&2
-        #$dexec $master loxicmd get ct | grep est >&2
         ct=`$dexec $master loxicmd get ct | grep est`
         echo "${ct//'\n'/$'\n'}" >&2
 
diff --git a/cicd/sctpmh-seagull/common.sh b/cicd/sctpmh-seagull/common.sh
index c5a28ac5f..d11adb0e3 100644
--- a/cicd/sctpmh-seagull/common.sh
+++ b/cicd/sctpmh-seagull/common.sh
@@ -76,7 +76,7 @@ spawn_docker_host() {
       fi
       shift 2
       ;;
-    -d | --ka-config )
+    -n | --ka-config )
       kpath="$2"
       if [[ -z ${ka+x} ]]; then
         ka="in"
@@ -87,6 +87,10 @@ spawn_docker_host() {
       extra_opts="$2"
       shift 2
       ;;
+    -x | --docker-args)
+      docker_extra_opts="$2"
+      shift 2
+      ;;
     -*|--*)
       echo "Unknown option $1"
       exit
@@ -109,11 +113,11 @@ spawn_docker_host() {
     fi
     if [[ ! -z ${ka+x} ]]; then
       sudo mkdir -p /etc/shared/$dname/
-      docker run -u root --cap-add SYS_ADMIN   --restart unless-stopped --privileged -dt --pid=host --cgroupns=host --entrypoint /bin/bash $bgp_conf -v /dev/log:/dev/log -v /etc/shared/$dname:/etc/shared $loxilb_config --name $dname $lxdocker
+      docker run -u root --cap-add SYS_ADMIN   --restart unless-stopped --privileged -dt $docker_extra_opts --entrypoint /bin/bash $bgp_conf -v /dev/log:/dev/log -v /etc/shared/$dname:/etc/shared $loxilb_config --name $dname $lxdocker
       get_llb_peerIP $dname
       docker exec -dt $dname /root/loxilb-io/loxilb/loxilb $bgp_opts $cluster_opts $ka_opts $extra_opts
     else
-      docker run -u root --cap-add SYS_ADMIN   --restart unless-stopped --privileged -dt --pid=host --cgroupns=host --entrypoint /bin/bash $bgp_conf -v /dev/log:/dev/log $loxilb_config --name $dname $lxdocker $bgp_opts
+      docker run -u root --cap-add SYS_ADMIN   --restart unless-stopped --privileged -dt $docker_extra_opts --entrypoint /bin/bash $bgp_conf -v /dev/log:/dev/log $loxilb_config --name $dname $lxdocker $bgp_opts
       docker exec -dt $dname /root/loxilb-io/loxilb/loxilb $bgp_opts $cluster_opts $extra_opts
     fi
   elif [[ "$dtype" == "host" ]]; then
@@ -553,6 +557,10 @@ function create_lb_rule() {
   echo "$1: loxicmd create lb ${args[*]}"
   $dexec $1 loxicmd create lb ${args[*]}
 
+  if [[ ${args[*]} == *"--mode=fullproxy"* ]]; then
+    return
+  fi
+
   hook=$($dexec $1 tc filter show dev eth0 ingress | grep tc_packet_func)
   if [[ $hook != *"tc_packet_func"* ]]; then
     echo "ERROR : No hook point found";
diff --git a/cicd/sctpmh-seagull/validation.sh b/cicd/sctpmh-seagull/validation.sh
index 25b73e7b1..d9f416bb7 100755
--- a/cicd/sctpmh-seagull/validation.sh
+++ b/cicd/sctpmh-seagull/validation.sh
@@ -46,11 +46,11 @@ echo -e "\n$border"
 
 echo -e "\n\n\n$border\n"
 if [[ $code == 0 ]]; then
-    echo -e "SCTP Multihoming CICD [OK]"
+    echo -e "SCTP multihoming with seagull CICD [OK]"
 else
-    echo -e "SCTP Multihoming CICD [NOK]"
+    echo -e "SCTP Multihoming with seagull CICD [NOK]"
 fi
-echo -e "\n$border\n"
+echo -e "\n$border\n"`
 
 
 exit $code
diff --git a/cicd/sctpmh-seagull/validation1.sh b/cicd/sctpmh-seagull/validation1.sh
index 20e0454f8..6bde78ab0 100755
--- a/cicd/sctpmh-seagull/validation1.sh
+++ b/cicd/sctpmh-seagull/validation1.sh
@@ -56,7 +56,7 @@ else
     echo "llb1 ep-info"
     $dexec llb1 loxicmd get ep
     echo "llb1 bpf-info"
-    $dexec llb1 ntc filter show dev eth0 ingress
+    $dexec llb1 tc filter show dev eth0 ingress
     echo "BFP trace -- "
     sudo timeout 5 cat  /sys/kernel/debug/tracing/trace_pipe
     sudo killall -9 cat
diff --git a/cicd/sctpmh/config.sh b/cicd/sctpmh/config.sh
index 2436deedb..b14694a07 100755
--- a/cicd/sctpmh/config.sh
+++ b/cicd/sctpmh/config.sh
@@ -21,18 +21,18 @@ echo "#########################################"
 echo "Connecting and configuring  hosts"
 echo "#########################################"
 
-connect_docker_hosts user r1 1500
-connect_docker_hosts user r2 1500
-connect_docker_hosts r1 sw1 1500
-connect_docker_hosts r2 sw1 1500
-connect_docker_hosts sw1 llb1 1500
-connect_docker_hosts sw1 llb2 1500
-connect_docker_hosts llb1 sw2 1500
-connect_docker_hosts llb2 sw2 1500
-connect_docker_hosts sw2 r3 1500
-connect_docker_hosts sw2 r4 1500
-connect_docker_hosts r3 ep1 1500
-connect_docker_hosts r4 ep1 1500
+connect_docker_hosts user r1
+connect_docker_hosts user r2
+connect_docker_hosts r1 sw1
+connect_docker_hosts r2 sw1
+connect_docker_hosts sw1 llb1
+connect_docker_hosts sw1 llb2
+connect_docker_hosts llb1 sw2
+connect_docker_hosts llb2 sw2
+connect_docker_hosts sw2 r3
+connect_docker_hosts sw2 r4
+connect_docker_hosts r3 ep1
+connect_docker_hosts r4 ep1
 
 create_docker_host_cnbridge --host1 sw1 --host2 llb1
 create_docker_host_cnbridge --host1 sw1 --host2 llb2
diff --git a/cicd/sctpmh/validation2.sh b/cicd/sctpmh/validation2.sh
index 3829422b0..122fb03a8 100755
--- a/cicd/sctpmh/validation2.sh
+++ b/cicd/sctpmh/validation2.sh
@@ -15,7 +15,7 @@ echo -e "\nHA state Master:$master BACKUP-$backup\n"
 $hexec ep1 sctp_test -H 31.31.31.1  -P 9999 -l > ep1.out &
 sleep 2
 
-$hexec user stdbuf -oL sctp_test -H 1.1.1.1 -B 2.2.2.1 -P 20000 -h $extIP -p $port -s -m 100 -x 50000 > user.out &
+$hexec user stdbuf -oL sctp_test -H 1.1.1.1 -B 2.2.2.1 -P 20000 -h $extIP -p $port -s -c 6 -x 10000 > user.out &
 
 #Path counters
 p1c_old=0
@@ -26,7 +26,7 @@ p3c_old=0
 p3c_new=0
 
 for((i=0;i<100;i++)) do
-    fin=`tail -n 100 user.out | grep "Client: Sending packets.(50000/50000)"`
+    fin=`tail -n 100 user.out | grep "Client: Sending packets.(10000/10000)"`
     if [[ ! -z $fin ]]; then
         fin=1
         echo "sctp_test done."
diff --git a/cicd/sctpmh/validation3.sh b/cicd/sctpmh/validation3.sh
index f2d3a8939..b80ca3eed 100755
--- a/cicd/sctpmh/validation3.sh
+++ b/cicd/sctpmh/validation3.sh
@@ -18,7 +18,7 @@ echo -e "\nTraffic Flow: User -> LB -> EP "
 $hexec ep1 sctp_test -H 31.31.31.1  -P 9999 -l > ep1.out &
 sleep 2
 
-$hexec user stdbuf -oL sctp_test -H 1.1.1.1 -B 2.2.2.1 -P 20000 -h $extIP -p $port -s -m 100 -x 50000 > user.out &
+$hexec user stdbuf -oL sctp_test -H 1.1.1.1 -B 2.2.2.1 -P 20000 -h $extIP -p $port -s -c 6 -x 1000 > user.out &
 #Path counters
 p1c_old=0
 p1c_new=0
@@ -28,8 +28,11 @@ p3c_old=0
 p3c_new=0
 down=0
 code=0
+
+sleep 5
+
 for((i=0;i<200;i++)) do
-    fin=`tail -n 100 user.out | grep "Client: Sending packets.(50000/50000)"`
+    fin=`tail -n 100 user.out | grep "Client: Sending packets.(1000/1000)"`
     if [[ ! -z $fin ]]; then
         fin=1
         echo "sctp_test done."
diff --git a/cicd/sctpmh/validation4.sh b/cicd/sctpmh/validation4.sh
index 93f76e10a..4bb191834 100755
--- a/cicd/sctpmh/validation4.sh
+++ b/cicd/sctpmh/validation4.sh
@@ -16,7 +16,7 @@ echo -e "\nTraffic Flow: EP ---> LB ---> User"
 $hexec user sctp_test -H 0.0.0.0  -P 9999 -l > user.out &
 sleep 2
 
-$hexec ep1 stdbuf -oL sctp_test -H 31.31.31.1 -B 32.32.32.1 -P 20000 -h $extIP -p $port -s -m 100 -x 50000 > ep1.out &
+$hexec ep1 stdbuf -oL sctp_test -H 31.31.31.1 -B 32.32.32.1 -P 20000 -h $extIP -p $port -s -c 6 -x 1000 > ep1.out &
 
 #Path counters
 p1c_old=0
@@ -27,8 +27,10 @@ p3c_old=0
 p3c_new=0
 down=0
 code=0
+sleep 2
+
 for((i=0;i<200;i++)) do
-    fin=`tail -n 100 ep1.out | grep "Client: Sending packets.(50000/50000)"`
+    fin=`tail -n 100 ep1.out | grep "Client: Sending packets.(1000/1000)"`
     if [[ ! -z $fin ]]; then
         fin=1
         echo "sctp_test done."
diff --git a/cicd/sctpmh/validation5.sh b/cicd/sctpmh/validation5.sh
index 61d4a40bd..757a65d4b 100755
--- a/cicd/sctpmh/validation5.sh
+++ b/cicd/sctpmh/validation5.sh
@@ -19,7 +19,7 @@ sudo pkill sctp_test
 $hexec ep1 sctp_test -H 31.31.31.1  -P 9999 -l > ep1.out &
 sleep 2
 
-$hexec user stdbuf -oL sctp_test -H 1.1.1.1 -B 2.2.2.1 -P 20000 -h $extIP -p $port -s -m 1400 -x 300000 > user.out &
+$hexec user stdbuf -oL sctp_test -H 1.1.1.1 -B 2.2.2.1 -P 20000 -h $extIP -p $port -s -c 6 -x 10000 > user.out &
 
 #Path counters
 p1c_old=0
@@ -33,8 +33,8 @@ hadone=0
 code=0
 nsyncOk=0
 
-for((i=0;i<200;i++)) do
-    fin=`tail -n 100 user.out | grep "Client: Sending packets.(300000/300000)"`
+for((i=0;i<400;i++)) do
+    fin=`tail -n 100 user.out | grep "Client: Sending packets.(10000/10000)"`
     if [[ ! -z $fin ]]; then
         fin=1
         echo "sctp_test done."
diff --git a/cicd/sctpmh/validation6.sh b/cicd/sctpmh/validation6.sh
index bbccecd3a..585ed17c3 100755
--- a/cicd/sctpmh/validation6.sh
+++ b/cicd/sctpmh/validation6.sh
@@ -21,7 +21,7 @@ sudo pkill sctp_test
 $hexec user sctp_test -H 0.0.0.0  -P 9999 -l > user.out &
 sleep 2
 
-$hexec ep1 stdbuf -oL sctp_test -H 31.31.31.1 -B 32.32.32.1 -P 20000 -h $extIP -p $port -s -m 1400 -x 500000 > ep1.out &
+$hexec ep1 stdbuf -oL sctp_test -H 31.31.31.1 -B 32.32.32.1 -P 20000 -h $extIP -p $port -s -c 6 -x 10000 > ep1.out &
 
 #Path counters
 p1c_old=0
@@ -35,8 +35,8 @@ hadone=0
 code=0
 nsyncOk=0
 
-for((i=0;i<200;i++)) do
-    fin=`tail -n 100 ep1.out | grep "Client: Sending packets.(500000/500000)"`
+for((i=0;i<500;i++)) do
+    fin=`tail -n 100 ep1.out | grep "Client: Sending packets.(10000/10000)"`
     if [[ ! -z $fin ]]; then
         fin=1
         echo "sctp_test done."

From ef3e631effc637ffad4e76a889e94857a5dcc177 Mon Sep 17 00:00:00 2001
From: Nikhil Malik <nikhil.malik@netlox.io>
Date: Wed, 11 Sep 2024 11:55:49 +0900
Subject: [PATCH 4/5] gh-87 : Chore - removed unwanted typo

---
 cicd/sctpmh-seagull/validation.sh | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/cicd/sctpmh-seagull/validation.sh b/cicd/sctpmh-seagull/validation.sh
index d9f416bb7..93d6ca8a4 100755
--- a/cicd/sctpmh-seagull/validation.sh
+++ b/cicd/sctpmh-seagull/validation.sh
@@ -50,7 +50,7 @@ if [[ $code == 0 ]]; then
 else
     echo -e "SCTP Multihoming with seagull CICD [NOK]"
 fi
-echo -e "\n$border\n"`
+echo -e "\n$border\n"
 
 
 exit $code

From 6f3a1c44f30c0f3994cf9aa5a9114e54c93e894f Mon Sep 17 00:00:00 2001
From: Nikhil Malik <nikhil.malik@netlox.io>
Date: Wed, 11 Sep 2024 22:46:24 +0900
Subject: [PATCH 5/5] gh-87 : Chore - removed tmp files

---
 cicd/sctpmh-seagull/.vagrant/bundler/global.sol | 1 -
 cicd/sctpmh-seagull/.vagrant/rgloader/loader.rb | 9 ---------
 2 files changed, 10 deletions(-)
 delete mode 100644 cicd/sctpmh-seagull/.vagrant/bundler/global.sol
 delete mode 100644 cicd/sctpmh-seagull/.vagrant/rgloader/loader.rb

diff --git a/cicd/sctpmh-seagull/.vagrant/bundler/global.sol b/cicd/sctpmh-seagull/.vagrant/bundler/global.sol
deleted file mode 100644
index 072d3ec90..000000000
--- a/cicd/sctpmh-seagull/.vagrant/bundler/global.sol
+++ /dev/null
@@ -1 +0,0 @@
-{"dependencies":[["vagrant-disksize",["= 0.1.3"]],["net-ssh",[">= 2.6.5","< 8.0.0"]],["net-scp",[">= 1.1"]],["log4r",["~> 1.1"]],["vagrant-scp",["= 0.5.9"]]],"checksum":"d41cdc087dc2595e62da764647bfcacc91965875ce15159c44cdee684a184f69","vagrant_version":"2.3.7"}
\ No newline at end of file
diff --git a/cicd/sctpmh-seagull/.vagrant/rgloader/loader.rb b/cicd/sctpmh-seagull/.vagrant/rgloader/loader.rb
deleted file mode 100644
index c3c05b095..000000000
--- a/cicd/sctpmh-seagull/.vagrant/rgloader/loader.rb
+++ /dev/null
@@ -1,9 +0,0 @@
-# This file loads the proper rgloader/loader.rb file that comes packaged
-# with Vagrant so that encoded files can properly run with Vagrant.
-
-if ENV["VAGRANT_INSTALLER_EMBEDDED_DIR"]
-  require File.expand_path(
-    "rgloader/loader", ENV["VAGRANT_INSTALLER_EMBEDDED_DIR"])
-else
-  raise "Encoded files can't be read outside of the Vagrant installer."
-end