From e92245a947c4d1261588aa432a8786dffc89ad71 Mon Sep 17 00:00:00 2001 From: Merlin Fisher-Levine Date: Wed, 22 Nov 2023 16:49:12 +0000 Subject: [PATCH] Add descriptions for new LSSTCam columns --- src/rubintv/models/models_data.yml | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/src/rubintv/models/models_data.yml b/src/rubintv/models/models_data.yml index c0ad7ccd..0465fff5 100644 --- a/src/rubintv/models/models_data.yml +++ b/src/rubintv/models/models_data.yml @@ -283,6 +283,35 @@ MetadataHeadings: The image type, e.g. bias, dark, flat etc Test type: The type of test being run, e.g. superflats + Carriage axis B: + "Camera coordinate value for carriage axis B of CCOB-Narrow projector [deg] - Source: (CATKW101-$CCOBBCAM)" + Carriage axis U: + "Camera coordinate value for carriage axis U of CCOB-Narrow projector [deg] - Source: (CATKW103-$CCOBUCAM)" + Incidence angle FP: + "Incidence angle of beam surface FP [deg] - Source: (CATKW10D-$FP_inc)" + FP x-coord: + "Camera Coordinate System x coordinate of beam at surface FP [mm] - Source: (CATKW10E-$FP_pos_x)" + FP y-coord: + "Camera Coordinate System y coordinate of beam at surface FP [mm] - Source: (CATKW10F-$FP_pos_y)" + Incidence angle FS1: + "Incidence angle of beam surface FS1 [deg] - Source: (CATKW110-$FS1_inc)" + Convergence test: + "Convergence test between target and raytraced position at focal plane for plan [mm] - Source: (CATKW128-$best)" + Shutter open (requested): + "High speed shutter requested open time [sec] - Source: (CATKW129-$expose)" + Exptime (requested): + "Requested focal plane exposure time [sec] - Source: (CATKW12A-$exptime)" + Filter model: + "Filter optic model used for computing this CCOB beam pointing [ugrizy none - Source: (CATKW12B-$filter)" + CCOB catalog exposure id: + "Unique CCOB-narrow exposure catalog entry ID number for registration [hex] - Source: (CATKW12C-$id)" + Hyperchromator wavelength: + "Hyperchromator setting for wavelength output [nm] - Source: (CATKW12D-$lambda)" + Sensor address: + "Sensor address used in computing target for this CCOB beam pointing [Rij_Skl[_Cmn] - Source: (CATKW130-$sens)" + Target photon level: + "Target photon level target for this exposure's flat top section of CCOB-narrow beam - cf. local calibration file vs. plan file [inc.phot/pixel] - Source: (CATKW131-$target_phot_per_pix)" + ts8: Run number: The run number, as taken from the exposure record's science_program field