From d2c52ac71999f4c75260e7d6b8430c2da5d28c55 Mon Sep 17 00:00:00 2001
From: Luc <8822552+luc-github@users.noreply.github.com>
Date: Mon, 25 Nov 2024 10:06:15 +0800
Subject: [PATCH] Close #955

Add more default settings for SPI W5500 Ethernet
Bump version for tracking
---
 esp3d/configuration.h              | 31 ++++++++++++++++++++----------
 esp3d/src/core/commands/ESP420.cpp |  2 +-
 esp3d/src/core/commands/ESP800.cpp |  2 +-
 esp3d/src/include/esp3d_defines.h  |  2 +-
 esp3d/src/include/esp3d_version.h  |  2 +-
 5 files changed, 25 insertions(+), 14 deletions(-)

diff --git a/esp3d/configuration.h b/esp3d/configuration.h
index 5a0361645..5a3e5d20d 100644
--- a/esp3d/configuration.h
+++ b/esp3d/configuration.h
@@ -137,22 +137,31 @@
 // TYPE_ETH_PHY_KSZ8041
 // TYPE_ETH_PHY_KSZ8081
 // TYPE_ETH_PHY_W5500
-#define ESP3D_ETH_PHY_TYPE TYPE_ETH_PHY_LAN8720
+//#define ESP3D_ETH_PHY_TYPE TYPE_ETH_PHY_W5500
 
 // Ethernet board Clock mode
 //  MODE_ETH_CLOCK_GPIO0_IN
 //  MODE_ETH_CLOCK_GPIO0_OUT
 //  MODE_ETH_CLOCK_GPIO16_OUT
 //  MODE_ETH_CLOCK_GPIO17_OUT
-#define ESP3D_ETH_CLK_MODE MODE_ETH_CLOCK_GPIO0_IN
+//#define ESP3D_ETH_CLK_MODE MODE_ETH_CLOCK_GPIO0_IN
 
 // Pins of ethernet board
-#define ESP3D_ETH_PHY_POWER_PIN 16
-#define ESP3D_ETH_PHY_MDC_PIN 23
-#define ESP3D_ETH_PHY_MDIO_PIN 18
+//#define ESP3D_ETH_PHY_POWER_PIN 16
+//#define ESP3D_ETH_PHY_MDC_PIN 23
+//#define ESP3D_ETH_PHY_MDIO_PIN 18
+// These are the pins for the W5500 chip using SPI
+#define ETHERNET_SPI_USE_SPI 1
+#define ETHERNET_SPI_USE_SPI2 0
+#define ETH_SPI_SCK  8
+#define ETH_SPI_MISO 23
+#define ETH_SPI_MOSI 19
+#define ETH_PHY_CS 5
+#define ETH_PHY_IRQ 33
+#define ETH_PHY_RST 4
 
 // Address of ethernet board
-#define ESP3D_ETH_PHY_ADDR 1
+#define ESP3D_ETH_PHY_ADDR 0
 
 /* Use Bluetooth
  * Enable serial bluetooth communications
@@ -287,11 +296,11 @@
 
 /* SD card connection
  * ESP_NO_SD //(default)
- * ESP_DIRECT_SD //Only your ESP board is connected to SDCard
+ * ESP_NOT_SHARED_SD //Only your ESP board is connected to SDCard
  * ESP_SHARED_SD //Printer SD Card is also connected to ESP3D
  * Does your system has SD card and how it is connected to your ESP3D
  */
- //#define SD_DEVICE_CONNECTION ESP_DIRECT_SD
+ //#define SD_DEVICE_CONNECTION ESP_NOT_SHARED_SD
 
 /* SD card library
  * ESP_SD_NATIVE //esp32 / esp8266
@@ -443,7 +452,7 @@
  * TFT_SPI_ST7789_240X240
  * TFT_SPI_ST7789_135X240
  */
-// #define DISPLAY_DEVICE OLED_I2C_SSD1306_128X64
+ //#define DISPLAY_DEVICE OLED_I2C_SSD1306_128X64
 
 /* Flip screen
  * Flip/rotate screen
@@ -453,7 +462,9 @@
 /* Display i2C address
  * Wire address of display
  */
-// #define DISPLAY_I2C_ADDR 0x3c
+ #define DISPLAY_I2C_ADDR 0x3c
+ //#define ESP_SDA_PIN 21
+ //#define ESP_SCL_PIN 22
 
 /* Display reset pin
  * The pin used to reset the screen (optional)
diff --git a/esp3d/src/core/commands/ESP420.cpp b/esp3d/src/core/commands/ESP420.cpp
index da4cb85a5..701e871ff 100644
--- a/esp3d/src/core/commands/ESP420.cpp
+++ b/esp3d/src/core/commands/ESP420.cpp
@@ -707,7 +707,7 @@ void ESP3DCommands::ESP420(int cmd_params_pos, ESP3DMessage* msg) {
 #endif  // NOTIFICATION_FEATURE
 #if defined(SD_DEVICE)
   // SD enabled
-  tmpstr = (ESP3DSettings::GetSDDevice() == ESP_DIRECT_SD)   ? "direct "
+  tmpstr = (ESP3DSettings::GetSDDevice() == ESP_NOT_SHARED_SD)   ? "direct "
            : (ESP3DSettings::GetSDDevice() == ESP_SHARED_SD) ? "shared "
                                                              : "none ";
   tmpstr += "(";
diff --git a/esp3d/src/core/commands/ESP800.cpp b/esp3d/src/core/commands/ESP800.cpp
index 74c35f31d..9cd24fc0e 100644
--- a/esp3d/src/core/commands/ESP800.cpp
+++ b/esp3d/src/core/commands/ESP800.cpp
@@ -147,7 +147,7 @@ void ESP3DCommands::ESP800(int cmd_params_pos, ESP3DMessage* msg) {
   }
 
   // SD connection
-  if (ESP3DSettings::GetSDDevice() == ESP_DIRECT_SD) {
+  if (ESP3DSettings::GetSDDevice() == ESP_NOT_SHARED_SD) {
     tmpstr = "direct";
   } else if (ESP3DSettings::GetSDDevice() == ESP_SHARED_SD) {
     tmpstr = "shared";
diff --git a/esp3d/src/include/esp3d_defines.h b/esp3d/src/include/esp3d_defines.h
index ba8eb3f02..57ca31ebd 100644
--- a/esp3d/src/include/esp3d_defines.h
+++ b/esp3d/src/include/esp3d_defines.h
@@ -188,7 +188,7 @@ typedef uint ESP3DSettingIndex;
 
 // SD connection
 #define ESP_NO_SD 0
-#define ESP_DIRECT_SD 1
+#define ESP_NOT_SHARED_SD 1
 #define ESP_SHARED_SD 2
 
 // SD Device type
diff --git a/esp3d/src/include/esp3d_version.h b/esp3d/src/include/esp3d_version.h
index e94243520..1a803f2fe 100644
--- a/esp3d/src/include/esp3d_version.h
+++ b/esp3d/src/include/esp3d_version.h
@@ -22,7 +22,7 @@
 #define _VERSION_ESP3D_H
 
 // version and sources location
-#define FW_VERSION "3.0.0.a241"
+#define FW_VERSION "3.0.0.a242"
 #define REPOSITORY "https://github.com/luc-github/ESP3D/tree/3.0"
 
 #endif  //_VERSION_ESP3D_H