CarPlay PC emulator

[steph-35]

Hi,

Has anyone already tried to make this firmware work with the emulator of the carplay-receiver project: https://github.com/harrylepotter/carplay-receiver/

I tried several custom firmwares to try to make this emulator work but it doesn't seem compatible.
When I connect the dongle to the PC, it recognizes it as an iphone (idVendor=05ac, idProduct=12a8) but the application is looking for a device with the ids: idVendor = 0x1314 , idProduct = 0x1520
I saw that it was the fakeiOdevice program that affected these id for the host but I don't see how to change them. I also saw that these ids were used in the start_accessory.sh script. So I executed the following lines:

echo 0 > /sys/class/android_usb_accessory/android0/enable
sleeping 1
#echo "Magic Communication Tec." > /sys/class/android_usb_accessory/android0/iManufacturer
#echo "Auto Box" > /sys/class/android_usb_accessory/android0/iProduct
echo 1314 > /sys/class/android_usb_accessory/android0/idVendor
echo 1520 > /sys/class/android_usb_accessory/android0/idProduct
echo accessory > /sys/class/android_usb_accessory/android0/functions
echo 1 > /sys/class/android_usb_accessory/android0/enable

But it doesn't seem to work.
Is the application that runs on android wait for iphone's id, unlike this simulator on PC?
What can I do to change these id on my device?
Thanks in advance,
Regards

[k7000i]

Are you tried the values found in start_iap2_ncm.sh?

echo 0 > /sys/class/android_usb/android0/enable
echo 239 > /sys/class/android_usb/android0/bDeviceClass
echo 2 > /sys/class/android_usb/android0/bDeviceSubClass
echo 1 > /sys/class/android_usb/android0/bDeviceProtocol
echo "Magic Communication Tec." > /sys/class/android_usb/android0/iManufacturer
echo "Auto Box" > /sys/class/android_usb/android0/iProduct
echo 08e4 > /sys/class/android_usb/android0/idVendor
echo 01c0 > /sys/class/android_usb/android0/idProduct
#echo accessory > /sys/class/android_usb/android0/functions
echo iap2,ncm > /sys/class/android_usb/android0/functions
echo 1 > /sys/class/android_usb/android0/enable