Motion Detector Delay (NVR - DS-7616NI-K1, cameras - DS-2CD1143G0-I, DS-2CD1043G2-I)

[kamazzz21]

Hi all! Sorry for my English.

Input data:

1. NVR - DS-7616NI-K1 (firmware - V4.76.015 build 240125);
2. IP Cameras DS-2CD1143G0-I (firmware - V5.5.89 build 210429);
3. IP Cameras DS-2CD1043G2-I (firmware - V5.8.2 build 240123).

When connected to the NVR via HDMI, movements are detected immediately (the yellow bell in the corner of the screen lights up).

DS-2CD1143G0-I cameras cannot detect motion; NVR does the motion analysis for them.

Cameras DS-2CD1043G2-I independently detect movements.

In HA, sensors receive motion data with a delay of 5-10 seconds, both when motion is detected and when there is no motion.

I am ready to provide all the necessary logs and data via github, by mail or any other convenient data exchange.

Hikvision Next version - 1.0.11

[pepsonEL]

Developer know about this problem and nothing do in this issue. This problem is also on other NVR and cameras.
#131