From 54aac9c488a01c5f27d69fd6e961e9d8c01abc46 Mon Sep 17 00:00:00 2001 From: Jared Males Date: Fri, 15 Nov 2024 18:14:27 -0700 Subject: [PATCH] updated cacao llowfs steps; removed hoblockleaks --- operating/cacao.rst | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/operating/cacao.rst b/operating/cacao.rst index 54d8e7c..ffbd8c0 100644 --- a/operating/cacao.rst +++ b/operating/cacao.rst @@ -96,15 +96,6 @@ High-order Loop [xsup@rtc tweeter-vispyr-rootdir]$ cacao-calib-apply default -4. After loading a calibration, you probably want to optimize the multiplication coefficients (which we also refer - to as leaks, though there's a 1 minus in there). The standard setup is - - :: - - [xsup@rtc tweeter-vispyr-rootdir]$ hoblockleaks 5 0.98 - - which sets the MCs for block 5 and above to 0.98 (leak of 0.02). Global multiplication coefficient should be 1. - This is how we normally operate the system on sky. Low-order T/T Loop ------------------- @@ -148,7 +139,8 @@ from either camera. [xsup@icc ncpc-rootdir]$ cacao-calib-apply llowfsTT - Now the following processes should be running in `cacao-fpsctrl-TUI` (the right hand CACAO terminal) + Now the following processes should be running in `cacao-fpsctrl-TUI` (the right hand CACAO terminal). + These should all be green: - wfs2cmodeval-2 - mvalC2dm-2 @@ -156,6 +148,8 @@ from either camera. - DMch2disp-02 - acquWFS-2 + It is ok if other processes are green. + 4. To record the current star location (or rather its average) you need to take a reference with: ::