You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I have two cameras connected, both work but not at the same time.
Both are working because i comment out the camera section in crowsnest.conf one and then the other. But at the same time never works for me...
What did you expect to happen
I am out off ideias now...
How to reproduce
Any help ?
Additional information
[cam Ender3]
mode: ustreamer # ustreamer - Provides mjpg and snapshots. (All devices)
# camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)
enable_rtsp: false # If camera-streamer is used, this enables also usage of an rtsp server
rtsp_port: 8554 # Set different ports for each device!
port: 8080 # HTTP/MJPG Stream/Snapshot Port
device: /dev/v4l/by-path/platform-xhci-hcd.4.auto-usb-0:1.3:1.0-video-index0 # See Log for available ...
resolution: 1920x1080 # widthxheight format
max_fps: 25 # If Hardware Supports this it will be forced, otherwise ignored/coerced.
#custom_flags: # You can run the Stream Services with custom flags.
#v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.
[cam Quarentine]
mode: ustreamer # ustreamer - Provides mjpg and snapshots. (All devices)
# camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)
enable_rtsp: false # If camera-streamer is used, this enables also usage of an rtsp server
rtsp_port: 8555 # Set different ports for each device!
port: 8081 # HTTP/MJPG Stream/Snapshot Port
device: /dev/v4l/by-path/platform-xhci-hcd.4.auto-usb-0:1.3:1.0-video-index0 # See Log for available ...
resolution: 1920x1080 # widthxheight format
max_fps: 30 # If Hardware Supports this it will be forced, otherwise ignored/coerced.
#custom_flags: # You can run the Stream Services with custom flags.
#v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.
The text was updated successfully, but these errors were encountered:
It looks like this ticket is a request for help (or similar).
Many helpful people will not see your message here and you are
unlikely to get a useful response.
We use github to handle bugreports, feature requests and
planning new releases.
What happened
I have two cameras connected, both work but not at the same time.
Both are working because i comment out the camera section in crowsnest.conf one and then the other. But at the same time never works for me...
What did you expect to happen
I am out off ideias now...
How to reproduce
Any help ?
Additional information
[cam Ender3]
mode: ustreamer # ustreamer - Provides mjpg and snapshots. (All devices)
# camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)
enable_rtsp: false # If camera-streamer is used, this enables also usage of an rtsp server
rtsp_port: 8554 # Set different ports for each device!
port: 8080 # HTTP/MJPG Stream/Snapshot Port
device: /dev/v4l/by-path/platform-xhci-hcd.4.auto-usb-0:1.3:1.0-video-index0 # See Log for available ...
resolution: 1920x1080 # widthxheight format
max_fps: 25 # If Hardware Supports this it will be forced, otherwise ignored/coerced.
#custom_flags: # You can run the Stream Services with custom flags.
#v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.
[cam Quarentine]
mode: ustreamer # ustreamer - Provides mjpg and snapshots. (All devices)
# camera-streamer - Provides webrtc, mjpg and snapshots. (rpi + Raspi OS based only)
enable_rtsp: false # If camera-streamer is used, this enables also usage of an rtsp server
rtsp_port: 8555 # Set different ports for each device!
port: 8081 # HTTP/MJPG Stream/Snapshot Port
device: /dev/v4l/by-path/platform-xhci-hcd.4.auto-usb-0:1.3:1.0-video-index0 # See Log for available ...
resolution: 1920x1080 # widthxheight format
max_fps: 30 # If Hardware Supports this it will be forced, otherwise ignored/coerced.
#custom_flags: # You can run the Stream Services with custom flags.
#v4l2ctl: # Add v4l2-ctl parameters to setup your camera, see Log what your cam is capable of.
The text was updated successfully, but these errors were encountered: