Trouble with Arlec GRID Connect fan

[ryanbooker]

I have an Arlec GRID Connect fan light (GRID Connect is Australian for Tuya), it is working perfectly in the Tuya app, and I had it working just fine in Tuya Local. However it stopped working for whatever reason, so I removed it from everywhere and re paired etc.

When I first added it to Home Assistant it was recognised correctly as fan and light with all the correct controls etc. However, now I can't get Tuya Local to recognise it properly and show fan as an option. It only ever offers me a weird set of options:

basic_ir_remote
mypin_6l_videopetfeeder
neptun_smart_waterleak
s11_rfir_remote

I've tried every protocol version…

Thank for any help you may offer.

[make-all]

Please try with the latest version. After the previous release there were a lot of reports suddenly reporting these 4 devices as offered matches for devices that previously were working, and these 4 are the devices that match "no data" received from the device. In that version, there was an upgrade of the tinytuya library, which may have caused this. In the latest I downgraded back to see if it was that, or maybe it is a change made on tuya's side to disable local data for some devices, in which case there will not be a solution.

[ryanbooker]

That fixed it! Thanks. :)