MKS DLC32 v2.1 and light burn movements off

[Twistedimage]

hello ladies and gents, im at a total loss here...i am building a custom laser, i just started programming the laser and im having an issue i just cant seam to solve, ive tried flashing several different firmware's nothing changes, ive tries every value in $3= nothing changes, ive even gone as far as purchasing a new multi meter and ohm tested the motor poles to make sure they are connected correctly, i even connected another steper motor to make sure if i turn the shaft by hand the motor in the machine rotates the direction i need it too. HERE'S the problem Y axis in light burn up is up down is down , on the machine touch screen up is down and down is up, I can change settings and get the machine touch screen to work correctly , then it changes lightburn movement to reverse up is down and down is up no matter what I do the machine touch screen and light burn controls just will not match. So NEW thing ive discovered that if i go in to light burn and enable CNC I can now set lightburn and the machine touch screen to make the same movements on the Y axis ie up is up and down is down, I thought I solved my issue....NOPE now the X axis is now not working the same on both the problem just moved from the Y to the X axis.....any ideas how to get both light burn, and the machine touch screen to move the Axis's in the correct directions
NEW

Message #lightburn-support

[bottleworks]

Maybe this can help you get started...
https://forum.lightburnsoftware.com/t/inverted-position-in-lightburn-mks-dlc32-grbl/152231