DC soldering iron controller for JBC C105, C115 and C210 handles
Accepting fake JCB handles from Ali/Ebay, example.
Up to 2A of current.
This board requires two supplies: for stm32 microcontroller (DC 5V) and the iron (variable up to DC 7.5 V / 2A).
JBC C105 cartridge resistance 3.6 Ohm.
JBC C210 cartridge resistance 2.5 Ohm.
Disclaimer: This is DIY contoller board. Use it on your own risk. I'm not responsible for any damage caused buy this product or service.
$ sudo apt install gcc-arm-none-eabi
$ git clone --recursive https://github.com/mdepx/sldr
$ cd sldr
$ make clean all
Use STLINK-V3MINIE to program this board.
