spi: geni-qcom: Fix boot warning related to pm_runtime and devres

During boot, users sometimes observe the following warning:

[7.841431] WARNING: CPU: 4 PID: 492 at
drivers/interconnect/core.c:685 __icc_enable
(drivers/interconnect/core.c:685 (discriminator 7))
[..]
[7.841541] Call trace:
[7.841542] __icc_enable (drivers/interconnect/core.c:685 (discriminator 7))
[7.841545] icc_disable (drivers/interconnect/core.c:708)
[7.841547] geni_icc_disable (drivers/soc/qcom/qcom-geni-se.c:862)
[7.841553] spi_geni_runtime_suspend+0x3c/0x4c spi_geni_qcom

This occurs when the spi-geni driver receives an -EPROBE_DEFER error
from spi_geni_grab_gpi_chan(), causing devres to start releasing all
resources as shown below:

[7.138679] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_icc_release (8 bytes)
[7.138751] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_icc_release (8 bytes)
[7.138827] geni_spi 880000.spi: DEVRES REL ffff800081443800 pm_runtime_disable_action (16 bytes)
[7.139494] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_pm_opp_config_release (16 bytes)
[7.139512] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_spi_release_controller (8 bytes)
[7.139516] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_clk_release (16 bytes)
[7.139519] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_ioremap_release (8 bytes)
[7.139524] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_region_release (24 bytes)
[7.139527] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_kzalloc_release (22 bytes)
[7.139530] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_pinctrl_release (8 bytes)
[7.139539] geni_spi 880000.spi: DEVRES REL ffff800081443800 devm_kzalloc_release (40 bytes)

The issue here is that pm_runtime_disable_action() results in a call to
spi_geni_runtime_suspend(), which attempts to suspend the device and
disable an interconnect path that devm_icc_release() has just released.

Resolve this by calling geni_icc_get() before enabling runtime PM. This
approach ensures that when devres releases resources in reverse order,
it will start with pm_runtime_disable_action(), suspending the device,
and then proceed to free the remaining resources.

Reported-by: Naresh Kamboju <[email protected]>
Reported-by: Linux Kernel Functional Testing <[email protected]>
Closes: https://lore.kernel.org/r/CA+G9fYtsjFtddG8i+k-SpV8U6okL0p4zpsTiwGfNH5GUA8dWAA@mail.gmail.com
Fixes: 89e362c ("spi: geni-qcom: Undo runtime PM changes at driver exit time")
Signed-off-by: Georgi Djakov <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>

drivers/spi/spi-geni-qcom.c

@@ -1116,6 +1116,11 @@ static int spi_geni_probe(struct platform_device *pdev)
 	init_completion(&mas->tx_reset_done);
 	init_completion(&mas->rx_reset_done);
 	spin_lock_init(&mas->lock);
+
+	ret = geni_icc_get(&mas->se, NULL);
+	if (ret)
+		return ret;
+
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_set_autosuspend_delay(&pdev->dev, 250);
 	ret = devm_pm_runtime_enable(dev);
@@ -1125,9 +1130,6 @@ static int spi_geni_probe(struct platform_device *pdev)
 	if (device_property_read_bool(&pdev->dev, "spi-slave"))
 		spi->target = true;
 
-	ret = geni_icc_get(&mas->se, NULL);
-	if (ret)
-		return ret;
 	/* Set the bus quota to a reasonable value for register access */
 	mas->se.icc_paths[GENI_TO_CORE].avg_bw = Bps_to_icc(CORE_2X_50_MHZ);
 	mas->se.icc_paths[CPU_TO_GENI].avg_bw = GENI_DEFAULT_BW;