This has moved -> new repo VoronMods!
This is a small modification of BadNoob's AB-BN hotend, replacing the wordmark on the front with the Voron logo or a plain front.
Print either the ab-bn-30-FAN-front-plain.stl or ab-bn-30-FAN-front-logo.stl and appropriate inset piece. There are 3 available with difference tolerances (0.1mm - 0.3mm) to get a good fit.
Assembly is the exact same as the primary AB-BN, just use the new fan front part.
2021-09-02
- Increase z tolerance
- Flipped insets STL so smooth surface is forward facing, feel free to flip over if using ironing
2021-09-01
- Initial release