Bugfixes

• More robust parsing of IP address in Xenstore, which may contain both IPv4 and IPv6 addresses (@linse, #103, reported by @grote)

• Avoid stack overflow with many connections in the NAT table (@linse and @hannesm, reported by @talex5 in #105, fixed by mirage-nat 2.2.2 release)

Dynamic firewall rule support

This version adapts qubes-mirage-firewall with

• dynamic rulesets via QubesDB (as defined in Qubes 4.0), and
• adds support for DNS hostnames in rules, using the pf-qubes library for parsing.

The DNS client is provided by DNS (>= 4.2.0) which uses a cache for name lookups. Not every packet will lead to a DNS
lookup if DNS rules are in place.

A test unikernel is available in the test subdirectory.

This project was done by @linse and @yomimono in summer 2019, see PR #96.

Additional changes and bugfixes:

• Support Mirage 3.7 and mirage-nat 2.0.0 (@hannesm, #89).
  The main improvement is fragmentation and reassembly support.

• Use the smaller OCurrent images as the base for building the Docker images (@talex5, #80).

  • Before: 1 GB (ocaml/opam2:debian-10-ocaml-4.08)
  • Now: 309 MB (ocurrent/opam:alpine-3.10-ocaml-4.08)

• Removed unreachable Lwt.catch (@hannesm, #90).

Documentation:

• Add note that AppVM used to build from source may need a private image larger than the default 2048MB (@marmot1791,
  #83).

• README: create the symlink-redirected docker dir (@xaki23, #75). Otherwise, installing the docker package removes t
  he dangling symlink.

• Note that mirage-firewall cannot be used as UpdateVM (@talex5, #68).

• Fix ln(1) call in build instructions (@jaseg, #69). The arguments were backwards.

Keeping up with upstream changes:

• Support mirage-3.7 via qubes-builder (@xaki23, #91).

• Remove unused Clock argument to Uplink (@talex5, #90).

• Rename things for newer mirage-xen versions (@xaki23, #80).

• Adjust to ipaddr-4.0.0 renaming _bytes to _octets (@xaki23, #75).

• Use OCaml 4.08.0 for qubes-builder builds (was 4.07.1) (@xaki23, #75).

• Remove netchannel pin as 1.11.0 is now released (@talex5, #72).

• Remove cmdliner pin as 1.0.4 is now released (@talex5, #71).

v0.6

Changes to rules language:

• Allow naming hosts (@talex5, #54). Previously, we passed in the interface, from which it was possible (but a little difficult) to extract the IP address and compare with some predefined ones. Now, we allow the user to list IP addresses and named tags for them, which can be matched on easily.

• Add some types to the rules (@talex5, #54). Before, we inferred the types from rules.ml and then the compiler checked that it was consistent with what firewall.ml expected. If it wasn't then it reported the problem as being with firewall.ml, which could be confusing to users.

• Give exact types for Packet.src (@talex5, #54). Before, the packet passed to rules.ml could have any host as its src. Now, from_client knows that src must be a Client, and from_netvm knows that src is External or NetVM.

• Combine Client_gateway and Firewall_uplink (@talex5, #64). Before, we used Client_gateway for the IP address of the firewall on the client network and Firewall_uplink for its address on the uplink network. However, Qubes 4 uses the same IP address for both, so we can't separate these any longer, and there doesn't seem to be any advantage to keeping them separate anyway.

Bug fixes:

• Upgrade to latest mirage-nat to fix ICMP (@yomimono, @linse, #55). Now ping and traceroute should work. Reported by @xaki23.

• Respond to ARP requests for *.*.*.1 (@talex5, #61). This is a work-around to get DHCP working with HVM domains. Reported by @cgchinicz. See: QubesOS/qubes-issues#5022

• Force backend MAC to fe:ff:ff:ff:ff:ff to fix HVM clients (@talex5, #61). Xen appears to configure the same MAC address for both the frontend and backend in XenStore. This works if the client uses just a simple ethernet device, but fails if it connects via a bridge. HVM domains have an associated stub domain running qemu, which provides an emulated network device. The stub domain uses a bridge to connect qemu's interface with eth0, and this didn't work. Force the use of the fixed version of mirage-net-xen, which no longer uses XenStore to get the backend MAC, and provides a new function to get the frontend one.

• Wait if dom0 is slow to set the network configuration (@talex5, #60). Sometimes we boot before dom0 has put the network settings in QubesDB. If that happens, log a message, wait until the database changes, and retry.

Reproducible builds:

• Add patch to cmdliner for reproducible build (@talex5, #52). See dbuenzli/cmdliner#106

• Use source date in .tar.bz2 archive (@talex5, #49). All files are now added using the date the build-with-docker script was last changed. Since this includes the hash of the result, it should be up-to-date. This ensures that rebuilding the archive doesn't change it in any way. Reported by @h01ger.

Documentation changes:

• Added example rules showing how to block access to an external service or allow SSH between AppVMs (@talex5, #54). Requested at https://groups.google.com/d/msg/qubes-users/BnL0nZGpJOE/61HOBg1rCgAJ.

• Add overview of the main components of the firewall in the README (@talex5, #54).

• Link to security advisories from README (@talex5, #58).

• Clarify how to build from source (@talex5, #51).

• Remove Qubes 3 instructions (@talex5, #48). See https://www.qubes-os.org/news/2019/03/28/qubes-3-2-has-reached-eol/

v0.5

Changes

• Update to the latest mirage-net-xen, mirage-nat and tcpip libraries (@yomimono, @talex5, #45, #47). In iperf benchmarks between a client VM and sys-net, this more than doubled the reported bandwidth!

• Don't wait for the Qubes GUI daemon to connect before attaching client VMs (@talex5, #38). If the firewall is restarted while AppVMs are connected, qubesd tries to reconnect them before starting the GUI agent. However, the firewall was waiting for the GUI agent to connect before handling the connections. This led to a 10s delay on restart for each client VM. Reported by @xaki23.

• Add stub makefile for qubes-builder (@xaki23, #37).

• Update build instructions for latest Fedora (@talex5, #36). yum no longer exists. Also, show how to create a symlink for /var/lib/docker on build VMs that aren't standalone. Reported by @xaki23.

• Add installation instructions for Qubes 4 (@yomimono, @reynir, @talex5, #27).

• Use Ethernet_wire.sizeof_ethernet instead of a magic 14 (@hannesm, #46).

Note that the repository has moved from github.com/talex5 to the github.com/mirage organisation, as it's no longer just my personal project.

v0.4

• Add support for HVM guests (needed for Qubes 4).

• Add support for disposable VMs.

• Drop frames if an interface's queue gets too long.

• Show the packet when failing to add a NAT rule. The previous message was just: WRN [firewall] Failed to add NAT rewrite rule: Cannot NAT this packet

v0.3

• Add support for NAT of ICMP queries (e.g. pings) and errors (e.g. "Host unreachable"). Before, these packets would be dropped.

• Use an LRU cache to avoid running out of memory and needing to reset the table. Should avoid any more out-of-memory bugs.

• Pass around parsed packets rather than raw ethernet frames.

• Pin Docker base image to a specific hash. Requested by Joanna Rutkowska.

• Update for Mirage 3.

• Remove non-Docker build instructions. Fedora 24 doesn't work with opam (because the current binary release of aspcud's clasp binary segfaults, which opam reports as External solver failed with inconsistent return value.).

v0.2

Build:

• Add option to build with Docker. This fixes opam-repository to a known commit for reproducible builds. It also displays the actual and expected SHA hashes after building.

Bug fixes:

• Updated README: the build also requires "patch". Reported by William Waites.
• Monitor set of client interfaces, not client domains. Qubes does not remove the client directory itself when the domain exits. This prevented clients from reconnecting. This may also make it possible to connect clients to the firewall via multiple interfaces, although this doesn't seem useful.
• Handle errors writing to client. mirage-net-xen would report Netback_shutdown if we tried to write to a client after it had disconnected. Now we just log this and continue.
• Ensure that old client has quit before adding new one. Not sure if this can happen, but it removes a TODO from the code.
• Allow clients to have any IP address. We previously assumed that Qubes would always give clients IP addresses on a particular network. However, it is not required to do this and in fact uses a different network for disposable VMs. With this change:
  • We no longer reject clients with unknown IP addresses.
  • The Unknown_client classification is gone; we have no way to tell the difference between a client that isn't connected and an external address.
  • We now consider every client to be on a point-to-point link and do not answer ARP requests on behalf of other clients. Clients should assume their netmask is 255.255.255.255 (and ignore /qubes-netmask). This allows disposable VMs to connect to the firewall but for some reason they don't process any frames we send them (we get their ARP requests but they don't get our replies). Taking eth0 down in the disp VM, then bringing it back up (and re-adding the routes) allows it to work.
• Cope with writing a frame failing. If a client disconnects suddenly then we may get an error trying to map its grant to send the frame.
• Survive death of our GUId connection to dom0. We don't need the GUI anyway.
• Handle Out_of_memory adding NAT entries. Because hash tables resize in big steps, this can happen even if we have a fair chunk of free memory.
• Calculate checksums even for Accept action. If packet has been NAT'd then we certainly need to recalculate the checksum, but even for direct pass-through it might have been received with an invalid checksum due to checksum offload. For now, recalculate full checksum in all cases.
• Log correct destination for redirected packets. Before, we always said it was going to "NetVM".
• If we can't find a free port, reset the NAT table.
• Reset NAT table if memory gets low.

Other changes:

• Report current memory use to XenStore.
• Reduce logging verbosity.
• Avoid using Lwt.join on listening threads. Lwt.join only reports an error if both threads fail.
• Keep track of transmit queue lengths. Log if we have to wait to send a frame.
• Use mirage-logs library for log reporter.
• Respond to WaitForSession commands (we're always ready!).
• Log SetDateTime messages from dom0 (we still don't actually update our clock, though).

Updates for upstream library changes:

• Updates for mirage 2.9.0.
  • Use new name for uplink device ("0", not "tap0").
  • Don't configure logging - mirage does that for us now.
• Remove tcpip pin. The 2.7.0 release has the checksum feature we need.
• Remove mirage-xen pin. mirage-xen 2.4.0 has been released with the required features (also fixes indentation problem reported by @cfcs).
• Add ncurses-dev to required yum packages. The ocamlfind package has started listing this as a required dependency for some reason, although it appears not to need it. Reported by cyrinux.
• Add work-around for Qubes passing Linux kernel arguments. With the new Functoria release of Mirage, these unrecognised arguments prevented the unikernel from booting. See: mirage/mirage#493
• Remove mirage-logs pin. Now available from the main repository.
• Remove mirage-qubes pin. mirage-qubes 0.2 has been released, and supports the latests Logs API.
• Remove mirage-net-xen pin. Version 1.5 has now been released, and includes netback support.
• Update to new Logs API.
• Remove pin for mirage-clock-xen. New version has been released now.

Test build using flambda

Might have better performance...

0.1

Initial release.