diff --git a/Imaging-1.1.7.tar.gz b/Imaging-1.1.7.tar.gz
new file mode 100755
index 0000000..b27a76b
Binary files /dev/null and b/Imaging-1.1.7.tar.gz differ
diff --git a/PyYAML-3.11.tar.gz b/PyYAML-3.11.tar.gz
new file mode 100755
index 0000000..2a5d431
Binary files /dev/null and b/PyYAML-3.11.tar.gz differ
diff --git a/README-SERIOUSLY b/README-SERIOUSLY
new file mode 100755
index 0000000..201b60b
--- /dev/null
+++ b/README-SERIOUSLY
@@ -0,0 +1,54 @@
+                ********************************************                 
+                ** Unified Debian MPF Installer Version 1 **
+                ** 12/10/2014                             **
+                ********************************************
+
+This is the Debian installer for the Mission Pinball Framework for use with the 
+P-ROC, P3, and FAST pinball controllers. It will not work for non-Debian distros
+or any other pinball controller hardware (but we'll have installers for those, 
+too). Please note that this DOES NOT INCLUDE pyprocgame, since that is the part 
+that MPF replaces. It does, however, include all the components to connect MPF 
+to the P-ROC, P3, and FAST controllers, which includes libpinproc (the C 
+drivers) and pypinproc (the C code that exposes the libpinproc methods to 
+python) or, in the case of FAST, libfastpinball.
+
+1. Some packages never seemed to install properly when pulled using apt-get. 
+These packages have been included with this kit and are compiled / installed by 
+the script. 
+
+2. Rather than include libpinproc, pypinproc, libfastpinball and MPF in the kit,
+they are downloaded automatically from git (the coders call this "cloning"). 
+When you start the script, you'll be prompted to choose dev or master. This 
+applies to all clone operations, so if you want to mix and match, you'll need to
+edit the commands in the script, replacing the $BRANCH variable in the line with
+the branch you want.
+
+3, If you're using the PD-LED driver board for P-ROC or P3, you should use the 
+dev branch. Otherwise, it shouldn't matter too much. dev is pretty stable, so 
+you could probably just get away with that.
+
+4. Certain components, like libfastpinball and MPF are only in one branch, so 
+you don't get the choice. The script has been hardcoded to get the proper bits.
+
+5. This script is for Debian and Debian derivatives (Ubuntu, Xubuntu, Kubuntu, 
+etc...) only, but has been tested on traditional i386, x86_64, and ODROID & 
+Raspberry Pi builds (arm_hf), including different OS versions.
+
+// USAGE //
+
+./install
+
+Unlike the original, this script requires a reboot. There is a permissions rule 
+that must be read at boot to allow non-root users access to the ftdi driver. 
+Additionally, there are environment variables that are defined during the 
+install that are needed afterwards. Without running 'source ~/.bashrc' or 
+rebooting, these environment variables won't be loaded. Rebooting kills two 
+birds with one stone.
+
+It is not necessary (or advised) to run this as root, though you will be 
+prompted to enter a root password right away. Running this script as a normal 
+user ensures that environment variables are created in the proper location. 
+Environment variables are set only for the user that is running the script. 
+If for some reason your machine is going to run the pinball code under a 
+different username, you will need to copy the "export" lines from ~/.bashrc to 
+the .bashrc file for that user. too.
diff --git a/cleanup b/cleanup
new file mode 100755
index 0000000..3e68e95
--- /dev/null
+++ b/cleanup
@@ -0,0 +1,15 @@
+##!/bin/bash
+
+# This script should be used to cleanup the install directory
+# and start again. It should be run as root.
+# e.g. sudo ./cleanup
+
+rm -r libftdi1-1.1
+rm -r libpinproc
+rm -r libusb-1.0.18
+rm -r libusbx-1.0.18
+rm -r pypinproc
+rm -r PyYAML-3.11
+rm -r yaml-cpp-0.2.5
+rm -r pyOSC-0.3.5b-5294
+rm -r libfastpinball
diff --git a/install b/install
new file mode 100755
index 0000000..efb1b0b
--- /dev/null
+++ b/install
@@ -0,0 +1,285 @@
+##!/bin/bash
+
+echo "      ##############################################"
+echo "     # IT IS NOT A GOOD IDEA TO RUN THIS AS ROOT! #"
+echo "    # ENVIRONMENT VARIABLES WILL NOT BUILD.      #"
+echo "   #                                            #"
+echo "  # IF YOU RAN THIS WITH SUDO, PRESS CTRL-C    #"
+echo " # NOW AND RUN AS A NORMAL USER.              #"
+echo "##############################################"
+
+### Choose the pinball controller hardware that you will be using
+echo "Which hardware will you be using? If you know, but don't have it,"
+echo "choose it anyway."
+echo ""
+echo "(Enter 1 for FAST, 2 for P3 or P-ROC, 3 for none, or CTRL-C to quit)"
+read REPLY
+case $REPLY in
+	1) PLATFORM="FAST";;
+ 	2) PLATFORM="PROC";;
+  3) PLATFORM="NONE";;
+esac
+
+#echo $PLATFORM
+
+
+if [ $PLATFORM != "FAST" ] && [ $PLATFORM != "PROC" ] && [ $PLATFORM != "NONE" ]
+then
+	echo
+	echo "########################"
+	echo "Please enter 1, 2, or 3"
+	exit
+fi
+
+clear
+
+### Choose the build you want to deploy, dev or master
+### MPF requires the DEV branch of pypinproc, so we'll get that automatically
+
+echo "Last Question: Choose which build of MPF you would like to deploy:"
+echo ""
+echo "If you don't know, choose 2 for master. You can easily switch later."
+echo ""
+echo "(Enter 1 for dev, 2 for master, or CTRL-C to quit)"
+read REPLY
+case $REPLY in
+ 	1) BRANCH="dev";;
+ 	2) BRANCH="master";;
+esac
+
+if [ $BRANCH != "dev" ] && [ $BRANCH != "master" ]
+then
+ 	echo
+ 	echo "###################"
+ 	echo "Please enter 1 or 2"
+ 	echo "If you want to get down and dirty, you'll have to edit this script."
+ 	exit
+fi
+
+clear
+
+echo
+echo "Installing prerequsites via apt-get"
+
+sudo apt-get update
+sudo apt-get -y install unzip cmake gcc g++ build-essential git-core libmpg123-0
+sudo apt-get -y install python2.7 python-dev python-setuptools libyaml-dev mplayer
+sudo apt-get -y install python-pygame libsdl1.2-dev
+
+echo "[PyYAML] Installing PyYAML 3.11"
+
+tar -zxpvf PyYAML-3.11.tar.gz
+cd PyYAML-3.11
+sudo python setup.py install
+
+if [ $? -ne 0 ]; then
+      echo "PyYAML installation failed"
+      exit 1
+fi
+
+echo "Backing out to main directory..."
+
+cd ..
+
+##########################################
+##         P-ROC and P3 Support         ##
+##########################################
+echo $PLATFORM
+if [ $PLATFORM = "PROC" ]
+then
+  echo "[PROC PREREQS] Installing PROC prerequisites via apt-get"
+  sudo apt-get -y install zlib1g-dev libudev-dev libusb-dev
+
+  echo "[LIBUSB1] Installing libusb1"
+
+  tar -jxvpf libusb-1.0.18.tar.bz2
+  cd libusb-1.0.18
+  ./configure
+  make
+  sudo make install
+
+  if [ $? -ne 0 ]; then
+  echo "libusb1 install failed."
+  exit 1
+  fi
+
+  echo "Backing out to main directory..."
+
+  cd ../
+
+  echo "[LIBUSBX] Installing libusbx"
+
+  tar -jxvpf libusbx-1.0.18.tar.bz2
+  cd libusbx-1.0.18
+  ./configure
+  make
+  sudo make install
+
+  if [ $? -ne 0 ]; then
+  echo "libusbx install failed."
+  exit 1
+  fi
+
+  echo "Backing out to main directory..."
+
+  cd ../
+
+  echo "[LIBFTDI1] Installing libftdi1"
+
+  tar -jxpvf libftdi1-1.1.tar.bz2
+  cd libftdi1-1.1
+  mkdir bin
+  cd bin
+  cmake ..
+  make
+  sudo make install
+
+  if [ $? -ne 0 ]; then
+  echo "LIBFTDI1 install failed."
+  exit 1
+  fi
+
+  echo "Backing out to main directory..."
+  cd ../..
+
+  echo "[YAML-CPP] Installing YAML-CPP"
+
+  tar -zxpvf yaml-cpp-0.2.5.tar.gz
+  cd yaml-cpp-0.2.5/
+  mkdir bin
+  cd bin
+  cmake ..
+  make
+  sudo make install
+
+  if [ $? -ne 0 ]; then
+  echo "YAML-CPP install failed."
+  exit 1
+  fi
+
+  echo "Backing out to main directory..."
+  cd ../..
+
+  echo "Setting up environment variables..."
+
+  export LD_LIBRARY_PATH=/usr/local/lib:$LD_LIBRARY_PATH
+  export C_INCLUDE_PATH_TEMP=$(find /usr/ -name ftdi.h -printf '%h\072')
+  export CPLUS_INCLUDE_PATH_TEMP=$(find /usr/ -name ftdi.h -printf '%h\072')
+  export C_INCLUDE_PATH=$(find /usr/ -name ftdi.h -printf '%h\072')
+  export CPLUS_INCLUDE_PATH=$(find /usr/ -name ftdi.h -printf '%h\072')
+
+
+  echo "Stuff should be exported now"
+
+  echo "export LD_LIBRARY_PATH=/usr/local/lib:$LD_LIBRARY_PATH" >> ~/.bashrc
+  echo "export C_INCLUDE_PATH="$C_INCLUDE_PATH_TEMP":$C_INCLUDE_PATH" >> ~/.bashrc
+  echo "export CPLUS_INCLUDE_PATH="$CPLUS_INCLUDE_PATH_TEMP":$CPLUS_INCLUDE_PATH" >> ~/.bashrc
+
+  source ~/.bashrc
+
+  echo "[LIBPINPROC] Installing libpinproc"
+
+  git clone --branch master https://github.com/preble/libpinproc.git libpinproc
+  cd libpinproc
+
+  mkdir bin
+  cd bin
+
+  cmake -DBUILD_SHARED_LIBS=ON ..
+  make
+  sudo make install
+
+  if [ $? -ne 0 ]; then
+  echo "libpinproc installation failed."
+  exit 1
+  fi
+
+  echo "Backing out to main directory..."
+
+  cd ../..
+
+  echo "[PyPINPROC] Installing pypinproc"
+
+  git clone --branch dev http://github.com/preble/pypinproc.git pypinproc
+  cd pypinproc
+  sudo python setup.py install
+
+  if [ $? -ne 0 ]; then
+  echo "PyPinproc installation failed"
+  exit 1
+  fi
+
+  echo "Backing out to main directory..."
+
+  cd ..
+
+fi
+
+echo "[OSC] Installing OSC"
+
+tar -zxvpf pyOSC-0.3.5b-5294.tar.gz
+cd pyOSC-0.3.5b-5294
+sudo python setup.py install
+
+if [ $? -ne 0 ]; then
+echo "OSC install failed."
+exit 1
+fi
+
+echo "Backing out to main directory..."
+
+cd ../
+
+echo "Setting up mplayer for audio testing" #might not be needed later
+echo "afm=mp3lib" >> ~/.mplayer/config
+
+
+echo "[MPF] Installing MPF"
+mkdir ~/pinball
+cd ~/pinball
+git clone --branch dev https://github.com/missionpinball/mpf.git mpf
+
+##########################################
+# This creates a mpf folder in ~/pinball #
+# so it's not in the toolkit folder      #
+##########################################
+
+cd -
+echo ""
+echo ""
+echo ""
+clear
+
+if [ $PLATFORM = "PROC" ]; then
+  echo "                   Installation finished."
+  echo "============================================================"
+  echo "!!!    You need to restart to complete installation!    !!!"
+  echo "      (It's complicated. Check the script to see why)"
+  echo ""
+else
+  echo "                   Installation finished."
+  echo "============================================================"
+  echo "   You shouldn't have to reboot, but what the heck, right?  "
+  echo ""
+fi
+
+echo "      When you are done, check your home folder for a"
+echo "      'pinball' folder. In there is the 'mpf' folder"
+echo "             and you'll be able to get started."
+echo "                     ( ~/pinball/mpf )"
+echo ""
+echo "                     Happy pinballing!"
+echo ""
+read -p "Do you want to reboot now? (y or n)" -n 1 -r
+echo    # (optional) move to a new line
+if [[ $REPLY = "y" ]]; then
+  read -p "Are you sure you want to reboot? (y or n)" -n 1 -r
+  echo    # (optional) move to a new line
+  if [[ $REPLY = "y" ]]; then
+    sudo shutdown -r now
+  else
+    echo "REMEMBER TO REBOOT BEFORE YOU TRY TO USE THE GAME"
+  fi
+else
+  echo "REMEMBER TO REBOOT BEFORE YOU TRY TO USE THE GAME"
+fi
diff --git a/libftdi1-1.1.tar.bz2 b/libftdi1-1.1.tar.bz2
new file mode 100755
index 0000000..fc20f3d
Binary files /dev/null and b/libftdi1-1.1.tar.bz2 differ
diff --git a/libusb-1.0.18.tar.bz2 b/libusb-1.0.18.tar.bz2
new file mode 100755
index 0000000..0638d81
Binary files /dev/null and b/libusb-1.0.18.tar.bz2 differ
diff --git a/libusbx-1.0.18.tar.bz2 b/libusbx-1.0.18.tar.bz2
new file mode 100755
index 0000000..9dd59db
Binary files /dev/null and b/libusbx-1.0.18.tar.bz2 differ
diff --git a/pyOSC-0.3.5b-5294.tar.gz b/pyOSC-0.3.5b-5294.tar.gz
new file mode 100755
index 0000000..5940ceb
Binary files /dev/null and b/pyOSC-0.3.5b-5294.tar.gz differ
diff --git a/pyglet-1.1.4.tar.gz b/pyglet-1.1.4.tar.gz
new file mode 100755
index 0000000..da77e80
Binary files /dev/null and b/pyglet-1.1.4.tar.gz differ
diff --git a/yaml-cpp-0.2.5.tar.gz b/yaml-cpp-0.2.5.tar.gz
new file mode 100755
index 0000000..05f09b7
Binary files /dev/null and b/yaml-cpp-0.2.5.tar.gz differ