Behringer Cmd Studio 4A

Behringer CMD Studio 4a

The Behringer CMD Studio 4a is a 2 deck controller that supports 4 virtual decks and had a built in 4 channel (one stereo master, one stereo headphones) USB sound card built in.

• Mixxx Forum Thread
• Manufacturer's product page
• Manufacturer's manual

Mixxx Sound Hardware Preferences

• Master output: channels 1-2
• Headphone output: channels 3-4

Controller Guide

Most of the buttons and knobs on the controller behave as they are labeled on the controller:

The only major departure form the above are the 4 "FX Control" knobs and buttons at the top of each deck.

Mixer

• The HIGH, MID, and LOW EQ knobs & kill buttons, deck faders, crossfader, master, and headphone monitoring (mix & volume) knobs all operate as labeled.
• Each deck also has a gain knob (leftmost "FX Control" knob).

Navigation Control

• The BROWSE knob scrolls thorough the track list in the library panel.
• The left and right buttons move through the library tree.
• The ENTER button expands/collapses library tree items.
• The LOAD buttons in the top of the center of the controller load the currently highlighted track in the library window into that deck.

Hot Cue Buttons

• If not currently set, pressing a HOT CUE button sets that hotcue at the current playback position.
• If already set, pressing a HOT CUE button jumps to that HOT CUE position.
• Pressing DEL toggles DELETE-mode.
• If DELETE-mode is active, pressing an already set HOT CUE button will clear that hot-cue.
• The main function of the DEL button is to toggle DELETE-mode to allow HOT CUEs to be cleared, however DELETE-mode also alters some of the other button functions, like a shift button on other controllers.

Deck Select Buttons

• The deck select buttons (A, B, C, D) make the respective "virtual" deck active.
• On the left deck: A = Channel 1, C = Channel 3.
• On the right deck: B = Channel 2, D = Channel 4.

Transport Control

• The LOAD buttons will load the currently highlighted track in the library window into that deck.
• The deck CUE, PLAY, SYNC, and LOOP buttons work as labeled (SYNC toggles master sync for the deck).
• The jog wheels temporarily speed up or slow down the track. When the SCRATCH button is activated, moving the wheel from the top scratches the track.

Also, when DELETE-mode is active (see above) the CUE and PLAY buttons behave differently:

• The CUE button triggers reverse playback in DELETE-mode while the CUE button is held down.
• The PLAY button triggers reverse-slip playback in DELETE-mode (while the PLAY button is held down). This actually temporarily turns slip-mode on with reverse playback, then turns slip-mode off and reverts to forward playback when the PLAY button is released. This means that if you already have slip-mode activated, e.g. by having pressed FX-Control button 1 earlier (see above), then slip-mode will be turned off as soon as you release the PLAY button (and you will return to the playback point where you would have been if you hadn't altered the playback).

FX Control Buttons

These do not control effects; they have other functions:

• FX Control button 1 toggles the deck slip mode on/off.
• FX Control button 2 toggles the deck repeat mode.
• FX Control button 3 can be tapped to adjust the beat-grid position.
• FX Control button 4 toggles the deck quantise mode on/off.

Playback Pitch/Rate

• The pitch sliders control the pitch.
• The PITCH BEND buttons step the playback rate up or down.
• The LOCK buttons turn on key lock so the pitch doesn't change when the playback rate changes.
• If DELETE-mode is active the PITCH BEND buttons step the key up/down without altering the playback rate.
• If both PITCH BEND buttons are pressed together, the playback rate (or key if DELETE-mode is active) are reset to their normal value.
• The lights of the PITCH BEND buttons will indicate whether the current pitch is higher or lower than normal for that track.

FX

• The "Quick Effect" on each deck is assigned to rightmost "FX Control" knob. By default this is a filter effect but can be changed in Mixxx's preferences.
• The 2 FX ASSIGN buttons on each deck send the deck's output to one (or both) of two effects in the (default) 4-unit effects rack. The left deck (A or C) can be assigned to effect units 1 and/or 2. The right deck (B or D) can be assigned to effect units 3 and/or 4.
• The middle two "FX Control" knobs on each deck act as the effect "super" controls for each of the two effects that the deck can be assigned to (most effects should respond sensibly to these controls).