highcharts.d.ts

// Type definitions for Highcharts 4.2.5
// Project: http://www.highcharts.com/
// Definitions by: Damiano Gambarotto <http://github.com/damianog>, Dan Lewi Harkestad <http://github.com/baltie>
// Definitions: https://github.com/DefinitelyTyped/DefinitelyTyped

/// <reference path='../jquery/jquery.d.ts' />

declare namespace __Highcharts {

var Chart: Chart;

interface Position {
    align?: string;
    verticalAlign?: string;
    x?: number;
    y?: number;
}

interface DateTimeFormats {
    /**
     * @default '%H:%M:%S.%L'
     */
    millisecond?: string;
    /**
     * @default '%H:%M:%S'
     */
    second?: string;
    /**
     * @default '%H:%M'
     */
    minute?: string;
    /**
     * @default '%H:%M'
     */
    hour?: string;
    /**
     * @default '%e. %b'
     */
    day?: string;
    /**
     * @default '%e. %b'
     */
    week?: string;
    /**
     * @default '%b \ '%y'
     */
    month?: string;
    /**
     * @default '%Y'
     */
    year?: string;
}

interface AxisEvent extends Event {
    min: number;
    max: number;
}

interface AxisLabels {
    /**
     * What part of the string the given position is anchored to. Can be one of 'left', 'center' or 'right'. Defaults to
     * an intelligent guess based on which side of the chart the axis is on and the rotation of the label.
     * @default 'center' on xAxis, 'right' on yAxis
     */
    align?: string;
    /**
     * For horizontal axes, the allowed degrees of label rotation to prevent overlapping labels. If there is enough
     * space, labels are not rotated. As the chart gets narrower, it will start rotating the labels -45 degrees, then
     * remove every second label and try again with rotations 0 and -45 etc. Set it to false to disable rotation, which
     * will cause the labels to word-wrap if possible.
     * @default [-45]
     * @since 4.1.0
     */
    autoRotation?: number[];
    /**
     * When each category width is more than this many pixels, we don't apply auto rotation. Instead, we lay out the
     * axis label with word wrap. A lower limit makes sense when the label contains multiple short words that don't
     * extend the available horizontal space for each label.
     * @default 80
     * @since 4.1.5
     */
    autoRotationLimit?: number;
    /**
     * Polar charts only. The label's pixel distance from the perimeter of the plot area.
     * @default 15
     */
    distance?: number;
    /**
     * Enable or disable the axis labels.
     * @default true
     */
    enabled?: boolean;
    /**
     * A {@link http://www.highcharts.com/docs/chart-concepts/labels-and-string-formatting|format string} for the axis label.
     * @default '{value}'
     * @since 3.0
     */
    format?: string;
    /**
     * Callback JavaScript function to format the label. The value is given by this.value. Additional properties for
     * this are axis, chart, isFirst and isLast.
     * @default function() {return this.value;}
     */
    formatter?: () => string;
    /**
     * Horizontal axis only. When staggerLines is not set, maxStaggerLines defines how many lines the axis is allowed to
     * add to automatically avoid overlapping X labels. Set to 1 to disable overlap detection.
     * @default 5
     * @since 3.0.3
     * @deprecated
     */
    maxStaggerLines?: number;
    /**
     * How to handle overflowing labels on horizontal axis. Can be undefined, false or 'justify'. By default it aligns
     * inside the chart area. If 'justify', labels will not render outside the plot area. If false, it will not be
     * aligned at all. If there is room to move it, it will be aligned to the edge, else it will be removed.
     * @since 2.2.5
     * @deprecated
     */
    overflow?: string | boolean;
    /**
     * The pixel padding for axis labels, to ensure white space between them.
     * @default 5
     */
    padding?: number;
    /**
     * Whether to reserve space for the labels. This can be turned off when for example the labels are rendered inside
     * the plot area instead of outside.
     * @default true
     * @since 4.1.10
     */
    reserveSpace?: boolean;
    /**
     * Rotation of the labels in degrees.
     * @default 0
     */
    rotation?: number;
    /**
     * Horizontal axes only. The number of lines to spread the labels over to make room or tighter labels.
     * @since 2.1
     */
    staggerLines?: number;
    /**
     * To show only every n'th label on the axis, set the step to n. Setting the step to 2 shows every other label. By
     * default, the step is calculated automatically to avoid overlap. To prevent this, set it to 1. This usually only
     * happens on a category axis, and is often a sign that you have chosen the wrong axis type.
     * Read more at {@link http://www.highcharts.com/docs/chart-concepts/axes|Axis docs} => What axis should I use?
     * @since 2.1
     */
    step?: number;
    /**
     * CSS styles for the label. Use whiteSpace: 'nowrap' to prevent wrapping of category labels. Use textOverflow:
     * 'none' to prevent ellipsis (dots).
     * @default {'color':'#6D869F','fontWeight':'bold'}.
     */
    style?: CSSObject;
    /**
     * Whether to use HTML to render the labels.
     * @default false
     */
    useHTML?: boolean;
    /**
     * The x position offset of the label relative to the tick position on the axis.
     * @default 0
     */
    x?: number;
    /**
     * The y position offset of the label relative to the tick position on the axis. The default makes it adapt to the
     * font size on bottom axis.
     * @default null
     */
    y?: number;
    /**
     * The Z index for the axis labels.
     * @default 7
     */
    zIndex?: number;
}

interface MousePlotEvents {
    click?: (event: Event) => void;
    mouseover?: (event: Event) => void;
    mouseout?: (event: Event) => void;
    mousemove?: (event: Event) => void;
}

/**
 * Text labels for the plot bands
 */
interface PlotLabel {
    /**
     * Horizontal alignment of the label. Can be one of 'left', 'center' or 'right'.
     * @default 'center'
     * @since 2.1
     */
    align?: string;
    /**
     * Rotation of the text label in degrees.
     * @default 0
     * @since 2.1
     */
    rotation?: number;
    /**
     * CSS styles for the text label.
     * @since 2.1
     */
    style?: CSSObject;
    /**
     * The string text itself. A subset of HTML is supported.
     * @since 2.1
     */
    text?: string;
    /**
     * The text alignment for the label. While align determines where the texts anchor point is placed within the plot
     * band, textAlign determines how the text is aligned against its anchor point. Possible values are 'left', 'center'
     * and 'right'. Defaults to the same as the align option.
     * @since 2.1
     */
    textAlign?: string;
    /**
     * Whether to {@link http://www.highcharts.com/docs/chart-concepts/labels-and-string-formatting#html|use HTML} to render the labels.
     * @default false
     * @since 3.0.3
     */
    useHTML?: boolean;
    /**
     * Vertical alignment of the label relative to the plot band. Can be one of 'top', 'middle' or 'bottom'.
     * @default 'top'
     * @since 2.1
     */
    verticalAlign?: string;
    /**
     * Horizontal position relative the alignment. Default varies by orientation.
     * @since 2.1
     */
    x?: number;
    /**
     * Vertical position of the text baseline relative to the alignment. Default varies by orientation.
     * @since 2.1
     */
    y?: number;
}

interface PlotBands {
    /**
     * Border color for the plot band. Also requires borderWidth to be set.
     * @default null
     */
    borderColor?: string | Gradient;
    /**
     * Border width for the plot band. Also requires borderColor to be set.
     * @default 0
     */
    borderWidth?: number;
    /**
     * The color of the plot band.
     */
    color?: string | Gradient;
    /**
     * An object defining mouse events for the plot band. Supported properties are click, mouseover, mouseout,
     * mousemove.
     * The this keyword refers to the PlotLineOrBand object.
     * @since 1.2
     */
    events?: MousePlotEvents;
    /**
     * The start position of the plot band in axis units.
     */
    from?: number;
    /**
     * An id used for identifying the plot band in Axis.removePlotBand.
     */
    id?: string;
    /**
     * In a gauge chart, this option determines the inner radius of the plot band that stretches along the perimeter. It
     * can be given as a percentage string, like '100%', or as a pixel number, like 100. By default, the inner radius is
     * controlled by the thickness option.
     * Only defined for yAxis.plotBands
     * @default null
     * @since 2.3
     */
    innerRadius?: number | string;
    /**
     * Text labels for the plot bands
     */
    label?: PlotLabel;
    /**
     * In a gauge chart, this option determines the outer radius of the plot band that stretches along the perimeter. It
     * can be given as a percentage string, like '100%', or as a pixel number, like 100.
     * Only defined for yAxis.plotBands
     * @default '100%'
     * @since 2.3
     */
    outerRadius?: number | string;
    /**
     * In a gauge chart, this option sets the width of the plot band stretching along the perimeter. It can be given as
     * a percentage string, like '10%', or as a pixel number, like 10. The default value 10 is the same as the default
     * tickLength, thus making the plot band act as a background for the tick markers.
     * Only defined for yAxis.plotBands
     * @default 10
     * @since 2.3
     */
    thickness?: number | string;
    /**
     * The end position of the plot band in axis units.
     */
    to?: number;
    /**
     * The z index of the plot band within the chart, relative to other elements. Using the same z index as another
     * element may give unpredictable results, as the last rendered element will be on top. Values from 0 to 20 make
     * sense.
     * @since 1.2
     */
    zIndex?: number;
}

/**
 * An array of lines stretching across the plot area, marking a specific value
 * on one of the axes.
 */
interface PlotLines {
    /**
     * The color of the line.
     */
    color?: string | Gradient;
    /**
     * The dashing or dot style for the plot line. For possible values see
     * {@link http://jsfiddle.net/gh/get/jquery/1.7.1/highslide-software/highcharts.com/tree/master/samples/highcharts/plotoptions/series-dashstyle-all/|this overview}.
     * (Solid ShortDash ShortDot ShortDashDot ShortDashDotDot Dot Dash LongDash DashDot LongDashDot LongDashDotDot)
     * @default 'Solid'
     * @since 1.2
     */
    dashStyle?: string;
    /**
     * An object defining mouse events for the plot line. Supported properties are click, mouseover, mouseout,
     * mousemove.
     * The this keyword refers to the PlotLineOrBand object.
     * @since 1.2
     */
    events?: MousePlotEvents;
    /**
     * An id used for identifying the plot line in Axis.removePlotLine.
     */
    id?: string;
    /**
     * Text labels for the plot lines
     */
    label?: PlotLabel;
    /**
     * The position of the line in axis units.
     */
    value?: number;
    /**
     * The width or thickness of the plot line.
     */
    width?: number;
    /**
     * The z index of the plot line within the chart.
     * @since 1.2
     */
    zIndex?: number;
}

interface AxisTitle {
    /**
     * Alignment of the title relative to the axis values. Possible values are 'low', 'middle' or 'high'.
     * @default 'middle'
     */
    align?: string;
    /**
     * Set the text to null to disable the title.
     * @default 'middle'
     * @deprecated
     */
    enabled?: string;
    /**
     * The pixel distance between the axis labels or line and the title.
     * @default xAxis: 0 for horizontal axes, 10 for vertical axes, yAxis: 40
     */
    margin?: number;
    /**
     * The distance of the axis title from the axis line. By default, this distance is computed from the offset width of
     * the labels, the labels' distance from the axis and the title's margin. However when the offset option is set, it
     * overrides all this.
     * @since 2.2.0
     */
    offset?: number;
    /**
     * The rotation of the text in degrees. 0 is horizontal, 270 is vertical reading from bottom to top.
     * @default xAxis: 0, yAxis: 270
     */
    rotation?: number;
    /**
     * CSS styles for the title. When titles are rotated they are rendered using vector graphic techniques and not all
     * styles are applicable.
     * @default { 'color': '#707070', 'fontWeight': 'bold' }.
     */
    style?: CSSObject;
    /**
     * The actual text of the axis title. It can contain basic HTML text markup like <b>, <i> and spans with style.
     * @default xAxis: null, yAxis: 'Values'
     */
    text?: string;
    /**
     * Horizontal pixel offset of the title position.
     * @default 0
     * @since 4.1.6
     */
    x?: number;
    /**
     * Vertical pixel offset of the title position.
     */
    y?: number;
}

interface AxisBreak {
    /**
     * A number indicating how much space should be left between the start and the end of the break. The break size is
     * given in axis units, so for instance on a datetime axis, a break size of 3600000 would indicate the equivalent of
     * an hour.
     * @default 0
     * @since 4.1.0
     */
    breakSize?: number;
    /**
     * The point where the break starts.
     * @since 4.1.0
     */
    from?: number;
    /**
     * Defines an interval after which the break appears again. By default the breaks do not repeat.
     * @default 0
     * @since 4.1.0
     */
    repeat?: number;
    /**
     * The point where the break ends.
     * @since 4.1.0
     */
    to?: number;
}

interface AxisOptions {
    /**
     * Whether to allow decimals in this axis' ticks. When counting integers,
     * like persons or hits on a web page, decimals must be avoided in the axis
     * tick labels.
     * @default true
     * @since 2.0
     */
    allowDecimals?: boolean;
    /**
     * When using an alternate grid color, a band is painted across the plot
     * area between every other grid line.
     */
    alternateGridColor?: string;
    /**
     * An array defining breaks in the axis, the sections defined will be left out and all the points shifted closer to
     * each other. Requires that the broken-axis.js module is loaded.
     * @since 4.1.0
     */
    breaks?: AxisBreak[];
    /**
     * If categories are present for the xAxis, names are used instead of numbers for that axis. Since Highcharts 3.0,
     * categories can also be extracted by giving each point a name and setting axis type to category. However, if you
     * have multiple series, best practice remains defining the categories array.
     * Example:
     * categories: ['Apples', 'Bananas', 'Oranges']
     * @default null
     */
    categories?: string[];
    /**
     * The highest allowed value for automatically computed axis extremes.
     * @since 4.0
     */
    ceiling?: number;
    /**
     * Configure a crosshair that follows either the mouse pointer or the hovered point.
     */
    crosshair?: CrosshairObject | boolean;
    /**
     * For a datetime axis, the scale will automatically adjust to the appropriate unit. This member gives the default
     * string representations used for each unit. For an overview of the replacement codes, see dateFormat.
     */
    dateTimeLabelFormats?: DateTimeFormats;
    /**
     * Whether to force the axis to end on a tick. Use this option with the maxPadding option to control the axis end.
     * @default false
     */
    endOnTick?: boolean;
    /**
     * Event handlers for the axis
     */
    events?: {
        /**
         * An event fired after the breaks have rendered.
         * @since 4.1.0
         */
        afterBreaks?: (event: Event) => void;
        /**
         * As opposed to the setExtremes event, this event fires after the final min and max values are computed and
         * corrected for minRange.
         * The this keyword refers to the {@link AxisObject|Axis} object.
         * @since 2.3
         */
        afterSetExtremes?: (event: AxisEvent) => void;
        /**
         * An event fired when a break from this axis occurs on a point.
         * The this keyword refers to the {@link AxisObject|Axis} object.
         */
        pointBreak?: (event: Event) => void;
        /**
         * Fires when the minimum and maximum is set for the axis, either by calling the .setExtremes() method or by
         * selecting an area in the chart. One parameter, event, is passed to the function. This contains common event
         * information based on jQuery or MooTools depending on which library is used as the base for Highcharts.
         *
         * The new user set minimum and maximum values can be found by event.min and event.max. When an axis is zoomed
         * all the way out from the 'Reset zoom' button, event.min and event.max are null, and the new extremes are set
         * based on this.dataMin and this.dataMax.
         *
         * The this keyword refers to the {@link AxisObject|Axis} object.
         * @since 1.2.0
         */
        setExtremes?: (event: AxisEvent) => void;
    };
    /**
     * The lowest allowed value for automatically computed axis extremes.
     * @default null
     * @since 4.0
     */
    floor?: number;
    /**
     * Color of the grid lines extending the ticks across the plot area.
     * @defaults to '#D8D8D8'.
     */
    gridLineColor?: string;
    /**
     * The dash or dot style of the grid lines. For possible values, see {@http://jsfiddle.net/gh/get/jquery/1.7.2/highslide-software/highcharts.com/tree/master/samples/highcharts/plotoptions/series-dashstyle-all/|this demonstration}. Defaults to Solid.
     * @since 1.2
     */
    gridLineDashStyle?: string;
    /**
     * The width of the grid lines extending the ticks across the plot area.
     * @default 0
     */
    gridLineWidth?: number;
    /**
     * The Z index of the grid lines.
     * @default 1
     */
    gridZIndex?: number;
    /**
     * An id for the axis. This can be used after render time to get a pointer to the axis object through chart.get().
     * @since 1.2.0
     */
    id?: string;
    /**
     * The axis labels show the number or category for each tick.
     */
    labels?: AxisLabels;
    /**
     * The color of the line marking the axis itself.
     * @default '#C0D0E0'.
     */
    lineColor?: string | Gradient;
    /**
     * The width of the line marking the axis itself.
     * @default 1
     */
    lineWidth?: number;
    /**
     * Index of another axis that this axis is linked to. When an axis is linked to a master axis, it will take the same
     * extremes as the master, but as assigned by min or max or by setExtremes. It can be used to show additional info,
     * or to ease reading the chart by duplicating the scales.
     * @since 2.0.2
     */
    linkedTo?: number;
    /**
     * The maximum value of the axis. If null, the max value is automatically calculated. If the endOnTick option is
     * true, the max value might be rounded up. The actual maximum value is also influenced by chart.alignTicks.
     */
    max?: number;
    /**
     * Padding of the max value relative to the length of the axis. A padding of 0.05 will make a 100px axis 5px longer.
     * This is useful when you don't want the highest data value to appear on the edge of the plot area. When the axis'
     * max option is set or a max extreme is set using axis.setExtremes(), the maxPadding will be ignored.
     * @default 0.01
     * @since 1.2.0
     */
    maxPadding?: number;
    /**
     * Renamed to minRange as of Highcharts 2.2.
     * @deprecated
     */
    maxZoom?: number;
    /**
     * The minimum value of the axis. If null the min value is automatically calculated. If the startOnTick option is
     * true, the min value might be rounded down.
     */
    min?: number;
    /**
     * Padding of the min value relative to the length of the axis. A padding of 0.05 will make a 100px axis 5px longer.
     * This is useful when you don't want the lowest data value to appear on the edge of the plot area. When the axis'
     * min option is set or a min extreme is set using axis.setExtremes(), the minPadding will be ignored.
     * @default 0.01
     * @since 1.2.0
     */
    minPadding?: number;
    /**
     * The minimum range to display on this axis. The entire axis will not be allowed to span over a smaller interval
     * than this. For example, for a datetime axis the main unit is milliseconds. If minRange is set to 3600000, you
     * can't zoom in more than to one hour.
     *
     * The default minRange for the x axis is five times the smallest interval between any of the data points.
     *
     * On a logarithmic axis, the unit for the minimum range is the power. So a minRange of 1 means that the axis can be
     * zoomed to 10-100, 100-1000, 1000-10000 etc.
     *
     * Note that the minPadding, maxPadding, startOnTick and endOnTick settings also affect how the extremes of the axis
     * are computed.
     */
    minRange?: number;
    /**
     * The minimum tick interval allowed in axis values. For example on zooming in on an axis with daily data, this can
     * be used to prevent the axis from showing hours. Defaults to the closest distance between two points on the axis.
     * @since 2.3.0
     */
    minTickInterval?: number;
    /**
     * Color of the minor, secondary grid lines.
     * @default '#E0E0E0'
     */
    minorGridLineColor?: string;
    /**
     * The dash or dot style of the minor grid lines. For possible values, see {@link http://jsfiddle.net/gh/get/jquery/1.7.1/highslide-software/highcharts.com/tree/master/samples/highcharts/plotoptions/series-dashstyle-all/|this demonstration}.
     * @default 'Solid'
     */
    minorGridLineDashStyle?: string;
    /**
     * Width of the minor, secondary grid lines.
     * @default 1
     */
    minorGridLineWidth?: number;
    /**
     * Color for the minor tick marks.
     * @default to '#A0A0A0'
     */
    minorTickColor?: string;
    /**
     * Tick interval in scale units for the minor ticks. On a linear axis, if 'auto', the minor tick interval is
     * calculated as a fifth of the tickInterval. If null, minor ticks are not shown.
     *
     * On logarithmic axes, the unit is the power of the value. For example, setting the minorTickInterval to 1 puts one
     * tick on each of 0.1, 1, 10, 100 etc. Setting the minorTickInterval to 0.1 produces 9 ticks between 1 and 10, 10
     * and 100 etc. A minorTickInterval of 'auto' on a log axis results in a best guess, attempting to enter
     * approximately 5 minor ticks between each major tick.
     *
     * If user settings dictate minor ticks to become too dense, they don't make sense, and will be ignored to prevent
     * performance problems.
     *
     * On axes using categories, minor ticks are not supported.
     */
    minorTickInterval?: number | string;
    /**
     * The pixel length of the minor tick marks.
     * @default 2
     */
    minorTickLength?: number;
    /**
     * The position of the minor tick marks relative to the axis line. Can be one of 'inside' and 'outside'.
     * @default 'outside'
     */
    minorTickPosition?: string;
    /**
     * The pixel width of the minor tick mark.
     * @default 0
     */
    minorTickWidth?: number;
    /**
     * The distance in pixels from the plot area to the axis line. A positive offset moves the axis with it's line,
     * labels and ticks away from the plot area. This is typically used when two or more axes are displayed on the same
     * side of the plot.
     * @default 0
     */
    offset?: number;
    /**
     * Whether to display the axis on the opposite side of the normal. The normal is on the left side for vertical axes
     * and bottom for horizontal, so the opposite sides will be right and top respectively. This is typically used with
     * dual or multiple axes.
     * @default false
     */
    opposite?: boolean;
    /**
     * An array of colored bands stretching across the plot area marking an interval on the axis.
     *
     * In a gauge, a plot band on the Y axis (value axis) will stretch along the perimeter of the gauge.
     */
    plotBands?: PlotBands[];
    /**
     * An array of lines stretching across the plot area, marking a specific value on one of the axes.
     */
    plotLines?: PlotLines[];
    /**
     * Whether to reverse the axis so that the highest number is closest to the origin. If the chart is inverted, the x
     * axis is reversed by default.
     * @default false
     */
    reversed?: boolean;
    /**
     * Whether to show the axis line and title when the axis has no data.
     * @default true
     * @since 1.1
     */
    showEmpty?: boolean;
    /**
     * Whether to show the first tick label.
     * @default true
     */
    showFirstLabel?: boolean;
    /**
     * Whether to show the last tick label.
     * @default true
     */
    showLastLabel?: boolean;
    /**
     * For datetime axes, this decides where to put the tick between weeks. 0 = Sunday, 1 = Monday.
     * @default 1
     */
    startOfWeek?: number;
    /**
     * Whether to force the axis to start on a tick. Use this option with the minPadding option to control the axis
     * start.
     * @default false
     * @since 1.2.0
     */
    startOnTick?: boolean;
    /**
     * The amount of ticks to draw on the axis. This opens up for aligning the ticks of multiple charts or panes within
     * a chart. This option overrides the tickPixelInterval option.
     *
     * This option only has an effect on linear axes. Datetime, logarithmic or category axes are not affected.
     */
    tickAmount?: number;
    /**
     * Color for the main tick marks.
     * @default '#C0D0E0'
     */
    tickColor?: string;
    /**
     * The interval of the tick marks in axis units. When null, the tick interval is computed to approximately follow
     * the tickPixelInterval on linear and datetime axes. On categorized axes, a null tickInterval will default to 1,
     * one category. Note that datetime axes are based on milliseconds, so for example an interval of one day is
     * expressed as 24 * 3600 * 1000.
     *
     * On logarithmic axes, the tickInterval is based on powers, so a tickInterval of 1 means one tick on each of 0.1,
     * 1, 10, 100 etc. A tickInterval of 2 means a tick of 0.1, 10, 1000 etc. A tickInterval of 0.2 puts a tick on 0.1,
     * 0.2, 0.4, 0.6, 0.8, 1, 2, 4, 6, 8, 10, 20, 40 etc.
     *
     * If the tickInterval is too dense for labels to be drawn, Highcharts may remove ticks.
     */
    tickInterval?: number;
    /**
     * The pixel length of the main tick marks.
     * @default 10
     */
    tickLength?: number;
    /**
     * If tickInterval is null this option sets the approximate pixel interval of the tick marks. Not applicable to
     * categorized axis.
     *
     * @default 72 for the Y axis, 100 for the X axis.
     */
    tickPixelInterval?: number;
    /**
     * The position of the major tick marks relative to the axis line. Can be one of 'inside' and 'outside'.
     * @default 'outside'
     */
    tickPosition?: string;
    /**
     * A callback function returning array defining where the ticks are laid out on the axis. This overrides the default
     * behaviour of tickPixelInterval and tickInterval. The automatic tick positions are accessible through
     * this.tickPositions and can be modified by the callback.
     */
    tickPositioner?: (min: number, max: number) => void;
    /**
     * An array defining where the ticks are laid out on the axis. This overrides the default behaviour of
     * tickPixelInterval and tickInterval.
     */
    tickPositions?: number[];
    /**
     * The pixel width of the major tick marks.
     * @default 1
     */
    tickWidth?: number;
    /**
     * For categorized axes only. If 'on' the tick mark is placed in the center of the category, if 'between' the tick
     * mark is placed between categories. The default is 'between' if the tickInterval is 1, else 'on'.
     * @default null
     */
    tickmarkPlacement?: string;
    /**
     * The axis title, showing next to the axis line.
     */
    title?: AxisTitle;
    /**
     * The type of axis. Can be one of 'linear', 'logarithmic', 'datetime' or 'category'. In a datetime axis, the
     * numbers are given in milliseconds, and tick marks are placed on appropriate values like full hours or days. In a
     * category axis, the point names of the chart's series are used for categories, if not a categories array is
     * defined.
     * @default 'linear'
     */
    type?: string;
    /**
     * Datetime axis only. An array determining what time intervals the ticks are allowed to fall on. Each array item is
     * an array where the first value is the time unit and the second value another array of allowed multiples.
     */
    units?: [[string, [number]]];
    /**
     * Whether axis, including axis title, line, ticks and labels, should be visible.
     * @default true
     * @since 4.1.9
     */
    visible?: boolean;
}

interface ColorAxisDataClass {
    from?: number;
    to?: number;
    color?: string | Gradient;
    name?: string;
}

/**
 * A color axis for choropleth mapping. Visually, the color axis will appear as a gradient or as separate items inside
 * the legend, depending on whether the axis is scalar or based on data classes.
 *
 * For supported color formats, see the docs article about colors.
 *
 * A scalar color axis is represented by a gradient. The colors either range between the minColor and the maxColor, or
 * for more fine grained control the colors can be defined in stops. Often times, the color axis needs to be adjusted to
 * get the right color spread for the data. In addition to stops, consider using a logarithmic axis type, or setting min
 * and max to avoid the colors being determined by outliers.
 *
 * When dataClasses are used, the ranges are subdivided into separate classes like categories based on their values.
 * This can be used for ranges between two values, but also for a true category. However, when your data is categorized,
 * it may be as convenient to add each category to a separate series.
 *
 * See the Axis object for programmatic access to the axis.
 */
interface ColorAxisOptions {
    /**
     * Determines how to set each data class' color if no individual color is set. The default value, tween, computes
     * intermediate colors between minColor and maxColor. The other possible value, category, pulls colors from the
     * global or chart specific colors array.
     * @default 'tween'
     */
    dataClassColor?: string;
    /**
     * An array of data classes or ranges for the choropleth map. If none given, the color axis is scalar and values are
     * distributed as a gradient between the minimum and maximum colors.
     */
    dataClasses?: ColorAxisDataClass[];
    /**
     * Whether to force the axis to end on a tick. Use this option with the maxPadding option to control the axis end.
     * @default true
     */
    endOnTick?: boolean;
    events?: {
        /**
         * As opposed to the setExtremes event, this event fires after the final min and max values are computed and
         * corrected for minRange.
         * The this keyword refers to the {@link AxisObject|Axis} object.
         */
        afterSetExtremes?: (event: AxisEvent) => void;
        /**
         * Fires when the minimum and maximum is set for the axis, either by calling the .setExtremes() method or by
         * selecting an area in the chart. One parameter, event, is passed to the function. This contains common event
         * information based on jQuery or MooTools depending on which library is used as the base for Highcharts.
         *
         * The new user set minimum and maximum values can be found by event.min and event.max. When an axis is zoomed
         * all the way out from the 'Reset zoom' button, event.min and event.max are null, and the new extremes are set
         * based on this.dataMin and this.dataMax.
         *
         * The this keyword refers to the {@link AxisObject|Axis} object.
         */
        setExtremes?: (event: AxisEvent) => void;
    };
    /**
     * Color of the grid lines extending from the axis across the gradient.
     * @default '#C0C0C0'
     */
    gridLineColor?: string;
    /**
     * The dash or dot style of the grid lines.
     * @default 'Solid'
     */
    gridLineDashStyle?: string;
    /**
     * The width of the grid lines extending from the axis across the gradient of a scalar color axis.
     * @default 1
     */
    gridLineWidth?: number;
    /**
     * An id for the axis. This can be used after render time to get a pointer to the axis object through chart.get().
     */
    id?: string;
    /**
     * The axis labels show the number for each tick.
     */
    labels?: AxisLabels;
    /**
     * The color of the line marking the axis itself.
     * @default '#C0D0E0'
     */
    lineColor?: string | Gradient;
    /**
     * The width of the line marking the axis itself.
     * @default 0
     */
    lineWidth?: number;
    /**
     * The triangular marker on a scalar color axis that points to the value of the hovered area. To disable the marker,
     * set marker: null.
     */
    marker?: {
        /**
         * Animation for the marker as it moves between values. Set to false to disable animation.
         * @default {duration: 50}
         */
        animation?: boolean | Animation;
        /**
         * The color of the marker.
         * @default 'gray'
         */
        color?: string | Gradient;
    };
    /**
     * The maximum value of the axis in terms of map point values. If null, the max value is automatically calculated.
     * If the endOnTick option is true, the max value might be rounded up.
     */
    max?: number;
    /**
     * The color to represent the maximum of the color axis. Unless dataClasses or stops are set, the gradient ends at
     * this value.
     *
     * If dataClasses are set, the color is based on minColor and maxColor unless a color is set for each data class, or
     * the dataClassColor is set.
     * @default '#102D4C'
     */
    maxColor?: string;
    /**
     * Padding of the max value relative to the length of the axis. A padding of 0.05 will make a 100px axis 5px longer.
     * @default 0.05
     */
    maxPadding?: number;
    /**
     * The minimum value of the axis in terms of map point values. If null, the min value is automatically calculated.
     * If the startOnTick option is true, the min value might be rounded down.
     */
    min?: number;
    /**
     * The color to represent the minimum of the color axis. Unless dataClasses or stops are set, the gradient starts at
     * this value.
     *
     * If dataClasses are set, the color is based on minColor and maxColor unless a color is set for each data class, or
     * the dataClassColor is set.
     * @default '#EFEFFF'
     */
    minColor?: string;
    /**
     * Padding of the min value relative to the length of the axis. A padding of 0.05 will make a 100px axis 5px longer.
     * @default 0.05
     */
    minPadding?: number;
    /**
     * Color of the minor, secondary grid lines.
     * @default '#E0E0E0'
     */
    minorGridLineColor?: string;
    /**
     * The dash or dot style of the minor grid lines.
     * @default 'Solid'
     */
    minorGridLineDashStyle?: string;
    /**
     * Width of the minor, secondary grid lines.
     * @default 1
     */
    minorGridLineWidth?: number;
    /**
     * Color for the minor tick marks.
     * @default '#A0A0A0'
     */
    minorTickColor?: string;
    /**
     * Tick interval in scale units for the minor ticks. On a linear axis, if 'auto', the minor tick interval is
     * calculated as a fifth of the tickInterval. If null, minor ticks are not shown.
     *
     * On logarithmic axes, the unit is the power of the value. For example, setting the minorTickInterval to 1 puts one
     * tick on each of 0.1, 1, 10, 100 etc. Setting the minorTickInterval to 0.1 produces 9 ticks between 1 and 10, 10
     * and 100 etc. A minorTickInterval of 'auto' on a log axis results in a best guess, attempting to enter
     * approximately 5 minor ticks between each major tick.
     *
     * If user settings dictate minor ticks to become too dense, they don't make sense, and will be ignored to prevent
     * performance problems.
     */
    minorTickInterval?: string | number;
    /**
     * The pixel length of the minor tick marks.
     * @default 2
     */
    minorTickLength?: number;
    /**
     * The position of the minor tick marks relative to the axis line. Can be one of inside and outside.
     * @default 'outside'
     */
    minorTickPosition?: string;
    /**
     * The pixel width of the minor tick mark
     * @default 0
     */
    minorTickWidth?: number;
    /**
     * Whether to reverse the axis so that the highest number is closest to the origin. Defaults to false in a
     * horizontal legend and true in a vertical legend, where the smallest value starts on top.
     */
    reversed?: boolean;
    /**
     * If labels are enabled, whether to show the first tick label.
     * @default true
     */
    showFirstLabel?: boolean;
    /**
     * If labels are enabled, whether to show the last tick label.
     * @default true
     */
    showLastLabel?: boolean;
    /**
     * Whether to force the axis to start on a tick. Use this option with the maxPadding option to control the axis
     * start.
     * @default true
     */
    startOnTick?: boolean;
    /**
     * Color stops for the gradient of a scalar color axis. Use this in cases where a linear gradient between a minColor
     * and maxColor is not sufficient. The stops is an array of tuples, where the first item is a float between 0 and 1
     * assigning the relative position in the gradient, and the second item is the color.
     */
    stops?: [number, string][];
    /**
     * Color for the main tick marks.
     * @default '#C0D0E0'
     */
    tickColor?: string;
    /**
     * The interval of the tick marks in axis units. When null, the tick interval is computed to approximately follow
     * the tickPixelInterval.
     */
    tickInterval?: number;
    /**
     * The pixel length of the main tick marks.
     * @default 10
     */
    tickLength?: number;
    /**
     * If tickInterval is null this option sets the approximate pixel interval of the tick marks.
     * @default 72
     */
    tickPixelInterval?: number;
    /**
     * The position of the major tick marks relative to the axis line. Can be one of 'inside' and 'outside'.
     * @default 'outside'
     */
    tickPosition?: string;
    /**
     * A callback function returning array defining where the ticks are laid out on the axis. This overrides the default
     * behaviour of tickPixelInterval and tickInterval.
     */
    tickPositioner?: (min: number, max: number) => void;
    /**
     * An array defining where the ticks are laid out on the axis. This overrides the default behaviour of
     * tickPixelInterval and tickInterval.
     */
    tickPositions?: number[];
    /**
     * The pixel width of the major tick marks.
     * @default 0
     */
    tickWidth?: number;
    /**
     * The type of interpolation to use for the color axis. Can be 'linear' or 'logarithmic'.
     * @default 'linear'
     */
    type?: string;
}

interface Extremes {
    /**
     * The maximum value of the axis' associated series.
     */
    dataMax: number;
    /**
     * The minimum value of the axis' associated series.
     */
    dataMin: number;
    /**
     * The maximum axis value, either automatic or set manually. If the max option is not set and maxPadding is 0, this
     * value will be the same as dataMax.
     */
    max: number;
    /**
     * The minimum axis value, either automatic or set manually. If the min option is not set and minPadding is 0, this
     * value will be the same as dataMin.
     */
    min: number;
}

interface Animation {
    /**
     * The duration of the animation in milliseconds.
     */
    duration?: number;
    /**
     * When using jQuery as the general framework, the easing can be set to linear or swing. More easing functions are
     * available with the use of jQuery plug-ins, most notably the jQuery UI suite. See the
     * {@link http://api.jquery.com/animate/|jQuery docs}. When using MooTools as the general framework, use the
     * property name transition instead of easing.
     */
    easing?: string;
}

interface AddSeriesEvent extends Event {
    /**
     * The series options that was passed to the addSeries method.
     */
    options: ChartOptions;
}

interface AxisValueOptions extends AxisOptions {
    /**
     * The axis value at the clicked spot
     */
    value: number;
}

interface ChartClickEvent extends Event {
    /**
     * Array containing the axes of each dimension and each axis' value at the clicked spot
     */
    xAxis: AxisValueOptions[];
    /**
     * Array containing the axes of each dimension and each axis' value at the clicked spot
     */
    yAxis: AxisValueOptions[];
}

interface ChartDrilldownEvent extends Event {
    /**
     * If a category label was clicked, which index.
     */
    category?: number;
    /**
     * The originating point.
     */
    point?: PointObject;
    /**
     * If a category label was clicked, this array holds all points corresponing to the category.
     */
    points?: PointObject[];
    /**
     * Options for the new series.
     */
    seriesOptions?: IndividualSeriesOptions;
}

interface ChartSelectionEvent extends Event {
    /**
     * Array containing the axes of each dimension and each axis' min and max values
     */
    xAxis: AxisOptions[];
    /**
     * Array containing the axes of each dimension and each axis' min and max values
     */
    yAxis: AxisOptions[];
}

interface ChartEvents {
    /**
     * Fires when a series is added to the chart after load time, using the addSeries method. One parameter, event, is
     * passed to the function. This contains common event information based on jQuery or MooTools depending on which
     * library is used as the base for Highcharts. Through event.options you can access the series options that was
     * passed to the addSeries method. Returning false prevents the series from being added.
     *
     * The this keyword refers to the Chart object.
     * @since 1.2.0
     */
    addSeries?: (event: AddSeriesEvent) => boolean | void;
    /**
     * Fires after a chart is printed through the context menu item or the Chart.print method. Requires the exporting
     * module.
     * @since 4.1.0
     */
    afterPrint?: (event: Event) => void;
    /**
     * Fires before a chart is printed through the context menu item or the Chart.print method. Requires the exporting
     * module.
     * @since 4.1.0
     */
    beforePrint?: (event: Event) => void;
    /**
     * Fires when clicking on the plot background. One parameter, event, is passed to the function. This contains common
     * event information based on jQuery or MooTools depending on which library is used as the base for Highcharts.
     *
     * Information on the clicked spot can be found through event.xAxis and event.yAxis, which are arrays containing the
     * axes of each dimension and each axis' value at the clicked spot. The primary axes are event.xAxis[0] and
     * event.yAxis[0]. Remember the unit of a datetime axis is milliseconds since 1970-01-01 00:00:00.
     *
     * click: function(e) {
     *      console.log(Highcharts.dateFormat('%Y-%m-%d %H:%M:%S', e.xAxis[0].value), e.yAxis[0].value);
     * }
     *
     * The this keyword refers to the Chart object.
     * @since 1.2.0
     */
    click?: (event: ChartClickEvent) => void;
    /**
     * Fires when a drilldown point is clicked, before the new series is added.
     * @since 3.0.8
     */
    drilldown?: (event: ChartDrilldownEvent) => void;
    /**
     * Fires when drilling up from a drilldown series.
     * @since 3.0.8
     */
    drillup?: (event: Event) => void;
    /**
     * Fires when the chart is finished loading. One parameter, event, is passed to the function. This contains common
     * event information based on jQuery or MooTools depending on which library is used as the base for Highcharts.
     *
     * From version 2.0.4, there is also a second parameter to Highcharts.Chart where a callback function can be passed
     * to be executed on chart.load.
     *
     * The this keyword refers to the Chart object.
     */
    load?: (event: Event) => void;
    /**
     * Fires when the chart is redrawn, either after a call to chart.redraw() or after an axis, series or point is
     * modified with the redraw option set to true. One parameter, event, is passed to the function. This contains
     * common event information based on jQuery or MooTools depending on which library is used as the base for
     * Highcharts.
     *
     * The this keyword refers to the Chart object.
     * @since 1.2.0
     */
    redraw?: (event: Event) => void;
    /**
     * Fires when an area of the chart has been selected. Selection is enabled by setting the chart's zoomType. One
     * parameter, event, is passed to the function. This contains common event information based on jQuery or MooTools
     * depending on which library is used as the base for Highcharts. The default action for the selection event is to
     * zoom the chart to the selected area. It can be prevented by calling event.preventDefault().
     *
     * Information on the selected area can be found through event.xAxis and event.yAxis, which are arrays containing
     * the axes of each dimension and each axis' min and max values. The primary axes are event.xAxis[0] and
     * event.yAxis[0]. Remember the unit of a datetime axis is milliseconds since 1970-01-01 00:00:00.
     *
     * selection: function(event) {
     *      // log the min and max of the primary, datetime x-axis
     *      console.log(
     *          Highcharts.dateFormat('%Y-%m-%d %H:%M:%S', event.xAxis[0].min),
     *          Highcharts.dateFormat('%Y-%m-%d %H:%M:%S', event.xAxis[0].max)
     *      );
     *      // log the min and max of the y axis
     *      console.log(event.yAxis[0].min, event.yAxis[0].max);
     * }
     */
    selection?: (event: ChartSelectionEvent) => void;
}

interface LinearGradient {
    x1: number;
    y1: number;
    x2: number;
    y2: number;
}

interface Gradient {
    linearGradient?: LinearGradient | number[];
    radialGradient?: {
        cx: number; cy: number; r: number;
    };
    stops?: any[][];
    /**
     * Brighten the color
     * @param {number} alpha
     */
    brighten?(alpha: number): Gradient;
    /**
     * Return the color a specified format
     * @param {string} format
     */
    get?(format: string): string;
    /**
     * The raw input
     */
    raw?: string;
    /**
     * rgba array
     */
    rgba?: number[];
    /**
     * Set the color's opacity to a given alpha value
     * @param  {number} alpha
     * @return {Gradient}
     */
    setOpacity?(alpha: number): Gradient;
}

interface ChartOptions3dFrame {
    /**
     * The color of the panel.
     * @default 'transparent'
     * @since 4.0
     */
    color?: string | Gradient,
    /**
     * Thickness of the panel.
     * @default 1
     * @since 4.0
     */
    size?: number;
}

interface ChartOptions3d {
    /**
     * One of the two rotation angles for the chart.
     * @default 0
     * @since 4.0
     */
    alpha?: number;
    /**
     * One of the two rotation angles for the chart.
     * @default 0
     * @since 4.0
     */
    beta?: number;
    /**
     * The total depth of the chart.
     * @default 100
     * @since 4.0
     */
    depth?: number;
    /**
     * Wether to render the chart using the 3D functionality.
     * @default false
     * @since 4.0
     */
    enabled?: boolean;
    /**
     * Provides the option to draw a frame around the charts by defining a bottom, front and back panel.
     */
    frame?: {
        /**
         * Defines the back panel of the frame around 3D charts.
         * @since 4.0
         */
        back?: ChartOptions3dFrame;
        /**
         * The bottom of the frame around a 3D chart.
         * @since 4.0
         */
        bottom?: ChartOptions3dFrame;
        /**
         * The side for the frame around a 3D chart.
         * @since 4.0
         */
        side?: ChartOptions3dFrame;
    };
    /**
     * Defines the distance the viewer is standing in front of the chart, this setting is important to calculate the
     * perspective effect in column and scatter charts. It is not used for 3D pie charts.
     * @default 100
     * @since 4.0
     */
    viewDistance?: number;
}

interface Shadow {
    /**
     * @default 'black'
     */
    color?: string | Gradient;
    /**
     * @default 1
     */
    offsetX?: number;
    /**
     * @default 1
     */
    offsetY?: number;
    /**
     * @default 0.15 / width
     */
    opacity?: number;
    /**
     * @default 3
     */
    width?: number;
}

interface ChartResetZoomButton {
    /**
     * The position of the button. This is an object that can hold the properties align, verticalAlign, x and y.
     * @since 2.2
     */
    position?: Position;
    /**
     * What frame the button should be placed related to. Can be either 'plot' or 'chart'.
     * @default 'plot'
     * @since 2.2
     */
    relativeTo?: string;
    /**
     * A collection of attributes for the button. The object takes SVG attributes like fill, stroke, stroke-width or r,
     * the border radius. The theme also supports style, a collection of CSS properties for the text. Equivalent
     * attributes for the hover state are given in theme.states.hover.
     * @since 2.2
     */
    theme?: ButtonStatesTheme;
}

interface ButtonTheme {
    display?: string; // css attr eg: 'none'
    /**
     * The button fill color, SVG color definition
     */
    fill?: string | Gradient;
    /**
     * The button stroke color, SVG color definition
     */
    stroke?: string;
    /**
     * The button stroke width
     * @type {[type]}
     */
    'stroke-width'?: number;
    /**
     * The border radius
     */
    r?: number;
    /**
     * CSS style
     */
    style?: Object;
}

interface ButtonStatesTheme extends ButtonTheme {
    /**
     * Themed button states. Only hover is supported for reset zoom button.
     */
    states?: {
        /**
         * Attributes and styles applied when hovering.
         */
        hover?: ButtonTheme;
        /**
         * Attributes and styles applied when button is selected (tri-state).
         */
        select?: ButtonTheme;
    };
}

interface ChartOptions {
    /**
     * When using multiple axis, the ticks of two or more opposite axes will automatically be aligned by adding ticks to
     * the axis or axes with the least ticks. This can be prevented by setting alignTicks to false. If the grid lines
     * look messy, it's a good idea to hide them for the secondary axis by setting gridLineWidth to 0.
     * @default true
     */
    alignTicks?: boolean;
    /**
     * Set the overall animation for all chart updating. Animation can be disabled throughout the chart by setting it to
     * false here. It can be overridden for each individual API method as a function parameter. The only animation not
     * affected by this option is the initial series animation, see plotOptions.series.animation.
     *
     * The animation can either be set as a boolean or a configuration object. If true, it will use the 'swing' jQuery
     * easing and a duration of 500 ms.
     *
     * @default true
     */
    animation?: boolean | Animation;
    /**
     * The background color or gradient for the outer chart area.
     * @default '#FFFFFF'
     */
    backgroundColor?: string | Gradient;
    /**
     * The color of the outer chart border.
     * @default '#4572A7'
     */
    borderColor?: string | Gradient;
    /**
     * The corner radius of the outer chart border.
     * @default 0
     */
    borderRadius?: number;
    /**
     * The pixel width of the outer chart border.
     * @default 0
     */
    borderWidth?: number;
    /**
     * A CSS class name to apply to the charts container div, allowing unique CSS styling for each chart.
     */
    className?: string;
    /**
     * Alias of type. Defaults to line.
     * @default 'line'
     * @deprecated
     */
    defaultSeriesType?: string;
    /**
     * Event listeners for the chart.
     */
    events?: ChartEvents;
    /**
     * An explicit height for the chart. By default the height is calculated from the offset height of the containing
     * element, or 400 pixels if the containing element's height is 0.
     */
    height?: number;
    /**
     * If true, the axes will scale to the remaining visible series once one series is hidden. If false, hiding and
     * showing a series will not affect the axes or the other series. For stacks, once one series within the stack is
     * hidden, the rest of the stack will close in around it even if the axis is not affected.
     * @default true
     * @since 1.2.0
     */
    ignoreHiddenSeries?: boolean;
    /**
     * Whether to invert the axes so that the x axis is vertical and y axis is horizontal. When true, the x axis is
     * reversed by default. If a bar series is present in the chart, it will be inverted automatically.
     * @default false
     */
    inverted?: boolean;
    /**
     * The margin between the outer edge of the chart and the plot area. The numbers in the array designate top, right,
     * bottom and left respectively. Use the options marginTop, marginRight, marginBottom and marginLeft for shorthand
     * setting of one option.
     *
     * Since version 2.1, the margin is 0 by default. The actual space is dynamically calculated from the offset of axis
     * labels, axis title, title, subtitle and legend in addition to the spacingTop, spacingRight, spacingBottom and
     * spacingLeft options.
     */
    margin?: number | number[];
    /**
     * The margin between the bottom outer edge of the chart and the plot area. Use this to set a fixed pixel value for
     * the margin as opposed to the default dynamic margin. See also spacingBottom.
     * @since 2.0
     */
    marginBottom?: number;
    /**
     * The margin between the left outer edge of the chart and the plot area. Use this to set a fixed pixel value for
     * the margin as opposed to the default dynamic margin. See also spacingLeft.
     * @since 2.0
     */
    marginLeft?: number;
    /**
     * The margin between the right outer edge of the chart and the plot area. Use this to set a fixed pixel value for
     * the margin as opposed to the default dynamic margin. See also spacingRight.
     * @since 2.0
     */
    marginRight?: number;
    /**
     * The margin between the top outer edge of the chart and the plot area. Use this to set a fixed pixel value for the
     * margin as opposed to the default dynamic margin. See also spacingTop.
     * @since 2.0
     */
    marginTop?: number;
    /**
     * Options to render charts in 3 dimensions. This feature requires highcharts-3d.js, found in the download package
     * or online at {@link code.highcharts.com/highcharts-3d.js}.
     */
    options3d?: ChartOptions3d;
    /**
     * Allows setting a key to switch between zooming and panning.
     * @since 4.0.3
     */
    panKey?: string;
    /**
     * Allow panning in a chart. Best used with panKey to combine zooming and panning.
     * @default false
     * @since 4.0.3
     */
    panning?: boolean;
    /**
     * Equivalent to zoomType, but for multitouch gestures only. By default, the pinchType is the same as the zoomType
     * setting. However, pinching can be enabled separately in some cases, for example in stock charts where a mouse
     * drag pans the chart, while pinching is enabled.
     * @default null
     * @since 3.0
     */
    pinchType?: string;
    /**
     * The background color or gradient for the plot area.
     */
    plotBackgroundColor?: string | Gradient;
    /**
     * The URL for an image to use as the plot background. To set an image as the background for the entire chart, set a
     * CSS background image to the container element. Note that for the image to be applied to exported charts, its URL
     * needs to be accessible by the export server.
     */
    plotBackgroundImage?: string;
    /**
     * The color of the inner chart or plot area border.
     * @default 0
     */
    plotBorderColor?: string;
    /**
     * The pixel width of the plot area border.
     * @default 0
     */
    plotBorderWidth?: number;
    /**
     * Whether to apply a drop shadow to the plot area. Requires that plotBackgroundColor be set. Since 2.3 the shadow
     * can be an object configuration containing color, offsetX, offsetY, opacity and width.
     * @default false
     */
    plotShadow?: boolean | Shadow;
    /**
     * When true, cartesian charts like line, spline, area and column are transformed into the polar coordinate system.
     * Requires highcharts-more.js.
     * @default false
     * @since 2.3.0
     */
    polar?: boolean;
    /**
     * Whether to reflow the chart to fit the width of the container div on resizing the window.
     * @default true
     * @since 2.1
     */
    reflow?: boolean;
    /**
     * The HTML element where the chart will be rendered. If it is a string, the element by that id is used. The HTML
     * element can also be passed by direct reference.
     */
    renderTo?: string | HTMLElement;
    /**
     * The button that appears after a selection zoom, allowing the user to reset zoom.
     */
    resetZoomButton?: ChartResetZoomButton;
    /**
     * The background color of the marker square when selecting (zooming in on) an area of the chart.
     * @default 'rgba(69,114,167,0.25)'
     * @since 2.1.7
     */
    selectionMarkerFill?: string;
    /**
     * Whether to apply a drop shadow to the outer chart area. Requires that backgroundColor be set. Since 2.3 the
     * shadow can be an object configuration containing color, offsetX, offsetY, opacity and width.
     * @default false
     */
    shadow?: boolean | Shadow;
    /**
     * Whether to show the axes initially. This only applies to empty charts where series are added dynamically, as axes
     * are automatically added to cartesian series.
     * @default false
     * @since 1.2.5
     */
    showAxes?: boolean;
    /**
     * The distance between the outer edge of the chart and the content, like title, legend, axis title or labels. The
     * numbers in the array designate top, right, bottom and left respectively. Use the options spacingTop,
     * spacingRight, spacingBottom and spacingLeft options for shorthand setting of one option.
     * @default [10, 10, 15, 10]
     * @since 3.0.6
     */
    spacing?: number[];
    /**
     * The space between the bottom edge of the chart and the content (plot area, axis title and labels, title, subtitle
     * or legend in top position).
     * @default 15
     * @since 2.1
     */
    spacingBottom?: number;
    /**
     * The space between the left edge of the chart and the content (plot area, axis title and labels, title, subtitle
     * or legend in top position).
     * @default 10
     * @since 2.1
     */
    spacingLeft?: number;
    /**
     * The space between the right edge of the chart and the content (plot area, axis title and labels, title, subtitle
     * or legend in top position).
     * @default 10
     * @since 2.1
     */
    spacingRight?: number;
    /**
     * The space between the top edge of the chart and the content (plot area, axis title and labels, title, subtitle or
     * legend in top position).
     * @default 10
     * @since 2.1
     */
    spacingTop?: number;
    /**
     * Additional CSS styles to apply inline to the container div. Note that since the default font styles are applied
     * in the renderer, it is ignorant of the individual chart options and must be set globally.
     */
    style?: CSSObject;
    /**
     * The default series type for the chart. Can be any of the chart types listed under plotOptions.
     * @default 'line'
     * @since 2.1.0
     */
    type?: string;
    /**
     * An explicit width for the chart. By default the width is calculated from the offset width of the containing
     * element.
     */
    width?: number;
    /**
     * Decides in what dimensions the user can zoom by dragging the mouse. Can be one of x, y or xy.
     */
    zoomType?: string;
}

interface CSSObject {
    background?: string;
    border?: string;
    color?: string | Gradient;
    cursor?: string;
    font?: string;
    fontFamily?: string;
    fontSize?: string;
    fontWeight?: string;
    left?: string;
    opacity?: number;
    padding?: string | number;
    position?: string;
    top?: string;
    textShadow?: string;
}

interface CreditsOptions {
    /**
     * Whether to show the credits text.
     * @default true
     */
    enabled?: boolean;
    /**
     * The URL for the credits label.
     * @default 'http://www.highcharts.com'
     */
    href?: string;
    /**
     * Position configuration for the credits label. Supported properties are align, verticalAlign, x and y.
     */
    position?: Position;
    /**
     * CSS styles for the credits label.
     */
    style?: Object;
    /**
     * The text for the credits label.
     * @default 'Highcharts.com'
     */
    text?: string;
}

interface DataSeriesMapping {
    [pointPropertyName: string]: number;
}

/**
 * The Data module provides a simplified interface for adding data to a chart from sources like CVS, HTML tables or grid
 * views. See also the tutorial article on the Data module.
 *
 * It requires the modules/data.js file to be loaded.
 *
 * Please note that the default way of adding data in Highcharts, without the need of a module, is through the
 * series.data option.
 */
interface DataOptions {
    /**
     * A two-dimensional array representing the input data on tabular form. This input can be used when the data is
     * already parsed, for example from a grid view component. Each cell can be a string or number. If not
     * switchRowsAndColumns is set, the columns are interpreted as series.
     * @since 4.0
     */
    columns?: [string | number][];
    /**
     * The callback that is evaluated when the data is finished loading, optionally from an external source, and parsed.
     * The first argument passed is a finished chart options object, containing the series. These options can be
     * extended with additional options and passed directly to the chart constructor.
     * @since 4.0
     */
    complete?: (options: Options) => void;
    /**
     * A comma delimited string to be parsed. Related options are startRow, endRow, startColumn and endColumn to delimit
     * what part of the table is used. The lineDelimiter and itemDelimiter options define the CSV delimiter formats.
     * @since 4.0
     */
    csv?: string;
    /**
     * Which of the predefined date formats in Date.prototype.dateFormats to use to parse date values. Defaults to a
     * best guess based on what format gives valid and ordered dates.
     *
     * Valid options include:
     * 'YYYY-mm-dd'
     * 'dd/mm/YYYY'
     * 'mm/dd/YYYY'
     * 'dd/mm/YY'
     * 'mm/dd/YY'
     * @since 4.0
     */
    dateFormat?: string;
    /**
     * The decimal point used for parsing numbers in the CSV.
     * @default '.'
     */
    decimalPoint?: string;
    /**
     * In tabular input data, the last column (indexed by 0) to use. Defaults to the last column containing data.
     * @since 4.0
     */
    endColumn?: number;
    /**
     * In tabular input data, the last row (indexed by 0) to use. Defaults to the last row containing data.
     * @since 4.0.4
     */
    endRow?: number;
    /**
     * Whether to use the first row in the data set as series names.
     * @default true
     * @since 4.1.0
     */
    firstRowAsNames?: boolean;
    /**
     * The key for a Google Spreadsheet to load. See {@link https://developers.google.com/gdata/samples/spreadsheet_sample|general information on GS}.
     * @since 4.0
     */
    googleSpreadsheetKey?: string;
    /**
     * The Google Spreadsheet worksheet to use in combination with googleSpreadsheetKey. The available id's from your
     * sheet can be read from https://spreadsheets.google.com/feeds/worksheets/{key}/public/basic
     * @since 4.0
     */
    googleSpreadsheetWorksheet?: string;
    /**
     * Item or cell delimiter for parsing CSV. Defaults to the tab character \t if a tab character is found in the CSV
     * string, if not it defaults to ,.
     * @since 4.0
     */
    itemDelimiter?: string;
    /**
     * Line delimiter for parsing CSV.
     * @default '\n'
     * @since 4.0
     */
    lineDelimiter?: string;
    /**
     * A callback function to parse string representations of dates into JavaScript timestamps. Should return an integer
     * timestamp on success.
     * @since 4.0
     */
    parseDate?: (val: any) => number;
    /**
     * A callback function to access the parsed columns, the two-dimentional input data array directly, before they are
     * interpreted into series data and categories. Return false to stop completion, or call this.complete() to continue
     * async.
     * @since 4.0
     */
    parsed?: (columns: [string | number][]) => boolean | void;
    /**
     * The same as the columns input option, but defining rows intead of columns.
     * @since 4.0
     */
    rows?: [string | number][];
    /**
     * An array containing object with Point property names along with what column id the property should be taken from.
     * @since 4.0.4
     */
    seriesMapping?: DataSeriesMapping[];
    /**
     * In tabular input data, the first column (indexed by 0) to use.
     * @default 0
     * @since 4.0
     */
    startColumn?: number;
    /**
     * In tabular input data, the first row (indexed by 0) to use.
     * @default 0
     * @since 4.0
     */
    startRow?: number;
    /**
     * Switch rows and columns of the input data, so that this.columns effectively becomes the rows of the data set, and
     * the rows are interpreted as series.
     * @default false
     * @since 4.0
     */
    switchRowsAndColumns?: boolean;
    /**
     * A HTML table or the id of such to be parsed as input data. Related options are startRow, endRow, startColumn and
     * endColumn to delimit what part of the table is used.
     */
    table?: string | HTMLElement;
}

/**
 * Options for drill down, the concept of inspecting increasingly high resolution data through clicking on chart items
 * like columns or pie slices.
 *
 * The drilldown feature requires the drilldown.js file to be loaded, found in the modules directory of the download
 * package, or online at code.highcharts.com/modules/drilldown.js.
 */
interface DrilldownOptions {
    /**
     * Additional styles to apply to the X axis label for a point that has drilldown data. By default it is underlined
     * and blue to invite to interaction.
     * @default { cursor: 'pointer', color: '#0d233a', fontWeight: 'bold', textDecoration: 'underline' }
     * @since 3.0.8
     */
    activeAxisLabelStyle?: Object;
    /**
     * Additional styles to apply to the data label of a point that has drilldown data. By default it is underlined and
     * blue to invite to interaction.
     * @default { cursor: 'pointer', color: '#0d233a', fontWeight: 'bold', textDecoration: 'underline' }
     * @since 3.0.8
     */
    activeDataLabelStyle?: Object;
    /**
     * When this option is false, clicking a single point will drill down all points in the same category, equivalent to
     * clicking the X axis label.
     * @default true
     * @since 4.1.7
     */
    allowPointDrilldown?: boolean;
    /**
     * Set the animation for all drilldown animations. Animation of a drilldown occurs when drilling between a column
     * point and a column series, or a pie slice and a full pie series. Drilldown can still be used between series and
     * points of different types, but animation will not occur.
     *
     * The animation can either be set as a boolean or a configuration object. If true, it will use the 'swing' jQuery
     * easing and a duration of 500 ms.
     * @since 3.0.8
     */
    animation?: boolean | Animation;
    /**
     * Options for the drill up button that appears when drilling down on a series. The text for the button is defined
     * in lang.drillUpText.
     */
    drillUpButton?: {
        /**
         * Positioning options for the button within the relativeTo box. Available properties are x, y, align and
         * verticalAlign.
         * @since 3.0.8
         */
        position?: Position;
        /**
         * What box to align the button to. Can be either 'plotBox' or 'spacingBox'.
         * @default 'plotBox'
         * @since 3.0.8
         */
        relativeTo?: string;
        /**
         * A collection of attributes for the button. The object takes SVG attributes like fill, stroke, stroke-width or
         * r, the border radius. The theme also supports style, a collection of CSS properties for the text. Equivalent
         * attributes for the hover state are given in theme.states.hover.
         * @since 3.0.8
         */
        theme?: ButtonStatesTheme;
    }
    /**
     * An array of series configurations for the drill down. Each series configuration uses the same syntax as the
     * series option set. These drilldown series are hidden by default. The drilldown series is linked to the parent
     * series' point by its id.
     * @since 3.0.8
     */
    series?: IndividualSeriesOptions[];
}

interface MenuItem {
    /**
     * String to show in the menu item.
     */
    text: string;
    /**
     * Callback function to run on click.
     */
    onclick: () => void;
}

interface Button {
    /**
     * Alignment for the buttons.
     * @default 'right'
     * @since 2.0
     */
    align?: string;
    /**
     * Whether to enable buttons.
     * @default true
     * @since 2.0
     */
    enabled?: boolean;
    /**
     * Pixel height of the buttons.
     * @default 20
     * @since 2.0
     */
    height?: number;
    /**
     * Fill color for the symbol within the button.
     * @default '#E0E0E0'
     * @since 2.0
     */
    symbolFill?: string;
    /**
     * The pixel size of the symbol on the button.
     * @default 14
     * @since 2.0
     */
    symbolSize?: number;
    /**
     * The color of the symbol's stroke or line.
     * @default '#666'
     * @since 2.0
     */
    symbolStroke?: string;
    /**
     * The pixel stroke width of the symbol on the button.
     * @default 1
     * @since 2.0
     */
    symbolStrokeWidth?: number;
    /**
     * The x position of the center of the symbol inside the button.
     * @default 12.5
     * @since 2.0
     */
    symbolX?: number;
    /**
     * The y position of the center of the symbol inside the button.
     * @default 10.5
     * @since 2.0
     */
    symbolY?: number;
    /**
     * A text string to add to the individual button.
     * @default null
     * @since 3.0
     */
    text?: string;
    /**
     * A configuration object for the button theme. The object accepts SVG properties like stroke-width, stroke and
     * fill. Tri-state button styles are supported by the states.hover and states.select objects.
     * @since 3.0
     */
    theme?: ButtonStatesTheme;
    /**
     * The vertical alignment of the buttons. Can be one of 'top', 'middle' or 'bottom'.
     * @default 'top'
     * @since 2.0
     */
    verticalAlign?: string;
    /**
     * The pixel width of the button.
     * @default 24
     * @since 2.0
     */
    width?: number;
    /**
     * The vertical offset of the button's position relative to its verticalAlign.
     * @default 0
     * @since 2.0
     */
    y?: number;
}

interface ExportingContextButton extends Button {
    /**
     * A collection of config options for the menu items. Each options object consists of a text option which is a
     * string to show in the menu item, as well as an onclick parameter which is a callback function to run on click.
     *
     * By default, there is the 'Print' menu item plus one menu item for each of the available export types. Menu items
     * can be customized by defining a new array of items and assigning null to unwanted positions.
     * @since 2.0
     */
    menuItems?: MenuItem[];
    /**
     * A click handler callback to use on the button directly instead of the popup menu.
     * @since 2.0
     */
    onclick?: () => void;
    /**
     * The symbol for the button. Points to a definition function in the Highcharts.Renderer.symbols collection. The
     * default exportIcon function is part of the exporting module.
     * @default 'menu'
     */
    symbol?: string;
    /**
     * The horizontal position of the button relative to the align option.
     * @default -10
     */
    x?: number;
}

interface ExportingOptions {
    /**
     * Experimental setting to allow HTML inside the chart (added through the useHTML options), directly in the exported
     * image. This allows you to preserve complicated HTML structures like tables or bi-directional text in exported
     * charts.
     *
     * Disclaimer: The HTML is rendered in a foreignObject tag in the generated SVG. The official export server is based
     * on PhantomJS, which supports this, but other SVG clients, like Batik, does not support it. This also applies to
     * downloaded SVG that you want to open in a desktop client.
     * @default false
     * @since 4.1.8
     */
    allowHTML?: boolean;
    /**
     * Options for the export related buttons, print and export. In addition to the default buttons listed here, custom
     * buttons can be added. See navigation.buttonOptions for general options.
     */
    buttons?: {
        contextButton?: ExportingContextButton;
    };
    /**
     * Additional chart options to be merged into an exported chart. For example, the exported chart can be given a
     * specific width and height, or a printer-friendly color scheme.
     * @default null
     */
    chartOptions?: Options;
    /**
     * Whether to enable the exporting module. Disabling the module will hide the context button, but API methods will
     * still be available.
     * @default true
     * @since 2.0
     */
    enabled?: boolean;
    /**
     * Whether or not to fall back to the export server if the offline-exporting module is unable to export the chart on
     * the client side.
     * @default true
     * @since 4.1.8
     */
    fallbackToExportServer?: boolean;
    /**
     * The filename, without extension, to use for the exported chart.
     * @default 'chart'
     * @since 2.0
     */
    filename?: string;
    /**
     * An object containing additional attributes for the POST form that sends the SVG to the export server. For
     * example, a target can be set to make sure the generated image is received in another frame, or a custom enctype
     * or encoding can be set.
     * @since 3.0.8
     */
    formAttributes?: any;
    /**
     * Defines the scale or zoom factor for the exported image compared to the on-screen display. While for instance a
     * 600px wide chart may look good on a website, it will look bad in print. The default scale of 2 makes this chart
     * export to a 1200px PNG or JPG.
     * @default 2
     * @since 3.0
     */
    scale?: number;
    /**
     * The height of the original chart when exported, unless an explicit chart.height is set. The height exported
     * raster image is then multiplied by scale.
     * @since 3.0
     */
    sourceHeight?: number;
    /**
     * The width of the original chart when exported, unless an explicit chart.width is set. The width exported
     * raster image is then multiplied by scale.
     * @since 3.0
     */
    sourceWidth?: number;
    /**
     * Default MIME type for exporting if chart.exportChart() is called without specifying a type option. Possible
     * values are image/png, image/jpeg, application/pdf and image/svg+xml.
     * @default 'image/png'
     * @since 2.0
     */
    type?: string;
    /**
     * The URL for the server module converting the SVG string to an image format. By default this points to Highslide
     * Software's free web service.
     * @default 'http://export.highcharts.com'
     * @since 2.0
     */
    url?: string;
    /**
     * The pixel width of charts exported to PNG or JPG. As of Highcharts 3.0, the default pixel width is a function of
     * the chart.width or exporting.sourceWidth and the exporting.scale.
     * @since 2.0
     */
    width?: number;
}

/**
 * Global options that don't apply to each chart. These options, like the lang options, must be set using the
 * Highcharts.setOptions method.
 */
interface GlobalObject {
    /**
     * A custom Date class for advanced date handling. For example, JDate can be hooked in to handle Jalali dates.
     * @since 4.0.4
     */
    Date?: any;
    /**
     * Path to the pattern image required by VML browsers in order to draw radial gradients.
     * @default 'http://code.highcharts.com/{version}/gfx/vml-radial-gradient.png'
     * @since 2.3.0
     */
    VMLRadialGradientURL?: string;
    /**
     * The URL to the additional file to lazy load for Android 2.x devices. These devices don't support SVG, so we
     * download a helper file that contains canvg, its dependency rbcolor, and our own CanVG Renderer class. To avoid
     * hotlinking to our site, you can install canvas-tools.js on your own server and change this option accordingly.
     * @default 'http://code.highcharts.com/{version}/modules/canvas-tools.js'
     */
    canvasToolsURL?: string;
    /**
     * A callback to return the time zone offset for a given datetime. It takes the timestamp in terms of milliseconds
     * since January 1 1970, and returns the timezone offset in minutes. This provides a hook for drawing time based
     * charts in specific time zones using their local DST crossover dates, with the help of external libraries.
     * @since 4.1.0
     */
    getTimezoneOffset?: (timestamp: number) => number;
    /**
     * The timezone offset in minutes. Positive values are west, negative values are east of UTC, as in the ECMAScript
     * getTimezoneOffset method. Use this to display UTC based data in a predefined time zone.
     * @default 0
     * @since 3.0.8
     */
    timezoneOffset?: number;
    /**
     * Whether to use UTC time for axis scaling, tickmark placement and time display in Highcharts.dateFormat.
     * Advantages of using UTC is that the time displays equally regardless of the user agent's time zone settings.
     * Local time can be used when the data is loaded in real time or when correct Daylight Saving Time transitions are
     * required.
     * @default true
     */
    useUTC?: boolean;
}

interface LabelItem {
    html: string;
    style: CSSObject;
}

interface LabelsOptions {
    items?: LabelItem[];
    style?: CSSObject;
}

interface LangObject {
    /**
     * Exporting module menu. The tooltip title for the context menu holding print and export menu items.
     * @default 'Chart context menu'
     * @since 3.0
     */
    contextButtonTitle?: string;
    /**
     * The default decimal point used in the Highcharts.numberFormat method unless otherwise specified in the function
     * arguments.
     * @default '.'
     * @since 1.2.2
     */
    decimalPoint?: string;
    /**
     * Exporting module only. The text for the JPEG download menu item.
     * @default 'Download JPEG image'
     * @since 2.0
     */
    downloadJPEG?: string;
    /**
     * Exporting module only. The text for the PDF download menu item.
     * @default 'Download PDF document'
     * @since 2.0
     */
    downloadPDF?: string;
    /**
     * Exporting module only. The text for the PNG download menu item.
     * @default 'Download PNG image'
     * @since 2.0
     */
    downloadPNG?: string;
    /**
     * Exporting module only. The text for the SVG download menu item.
     * @default 'Download SVG vector image'
     * @since 2.0
     */
    downloadSVG?: string;
    /**
     * The text for the button that appears when drilling down, linking back to the parent series. The parent series'
     * name is inserted for {series.name}
     * @default 'Back to {series.name}'
     * @since 3.0.8
     */
    drillUpText?: string;
    /**
     * What to show in a date field for invalid dates.
     * @default ''
     * @since 4.1.8
     */
    invalidDate?: string;
    /**
     * The loading text that appears when the chart is set into the loading state following a call to chart.showLoading.
     * @default 'Loading...'
     */
    loading?: string;
    /**
     * An array containing the months names. Corresponds to the %B format in Highcharts.dateFormat().
     * @default ['January' , 'February' , 'March' , 'April' , 'May' , 'June' , 'July' , 'August' , 'September' , 'October' , 'November' , 'December']
     */
    months?: string[];
    /**
     * The text to display when the chart contains no data. Requires the no-data module, see noData.
     * @default 'No data to display'
     * @since 3.0.8
     */
    noData?: string;
    /**
     * Metric prefixes used to shorten high numbers in axis labels. Replacing any of the positions with null causes the
     * full number to be written. Setting numericSymbols to null disables shortening altogether.
     * @default ['k', 'M', 'G', 'T', 'P', 'E']
     * @since 2.3.0
     */
    numericSymbols?: string[];
    /**
     * Exporting module only. The text for the menu item to print the chart.
     * @default 'Print chart'
     * @since 3.0.1
     */
    printChart?: string;
    /**
     * The text for the label appearing when a chart is zoomed.
     * @default 'Reset zoom'
     * @since 1.2.4
     */
    resetZoom?: string;
    /**
     * The tooltip title for the label appearing when a chart is zoomed.
     * @default 'Reset zoom level 1:1'
     * @since 1.2.4
     */
    resetZoomTitle?: string;
    /**
     * An array containing the months names in abbreviated form. Corresponds to the %b format in
     * Highcharts.dateFormat().
     * @default ['Jan', 'Feb', 'Mar', 'Apr', 'May', 'Jun', 'Jul', 'Aug', 'Sep', 'Oct', 'Nov', 'Dec']
     */
    shortMonths?: string[];
    /**
     * The default thousands separator used in the Highcharts.numberFormat method unless otherwise specified in the
     * function arguments. Since Highcharts 4.1 it defaults to a single space character, which is compatible with ISO
     * and works across Anglo-American and continental European languages.
     * @default ' '
     * @since 1.2.2
     */
    thousandsSep?: string;
    /**
     * An array containing the weekday names.
     * @default ['Sunday', 'Monday', 'Tuesday', 'Wednesday', 'Thursday', 'Friday', 'Saturday']
     */
    weekdays?: string[];
}

interface LegendNavigationOptions {
    /**
     * The color for the active up or down arrow in the legend page navigation.
     * @default '#3E576F'
     * @since 2.2.4
     */
    activeColor?: string;
    /**
     * How to animate the pages when navigating up or down. A value of true applies the default navigation given in the
     * chart.animation option. Additional options can be given as an object containing values for easing and duration.
     * @default true
     * @since 2.2.4
     */
    animation?: boolean | Animation;
    /**
     * The pixel size of the up and down arrows in the legend paging navigation.
     * @default 12
     * @since 2.2.4
     */
    arrowSize?: number;
    /**
     * The color of the inactive up or down arrow in the legend page navigation.
     * @default '#CCC'
     */
    inactiveColor?: string;
    /**
     * Text styles for the legend page navigation.
     * @since 2.2.4
     */
    style?: CSSObject;
}

interface LegendTitleOptions {
    /**
     * Generic CSS styles for the legend title.
     * @default {'fontWeight':'bold'}
     * @since 3.0
     */
    style?: CSSObject;
    /**
     * A text or HTML string for the title.
     * @default null
     * @since 3.0
     */
    text?: string;
}

interface LegendOptions {
    /**
     * The horizontal alignment of the legend box within the chart area. Valid values are 'left', 'center' and 'right'.
     * In the case that the legend is aligned in a corner position, the layout option will determine whether to place it
     * above/below or on the side of the plot area.
     * @default 'center'
     * @since 2.0
     */
    align?: string;
    /**
     * The background color of the legend.
     */
    backgroundColor?: string | Gradient;
    /**
     * The color of the drawn border around the legend.
     * @default '#909090'
     */
    borderColor?: string | Gradient;
    /**
     * The border corner radius of the legend.
     * @default 0
     */
    borderRadius?: number;
    /**
     * The width of the drawn border around the legend.
     * @default 0
     */
    borderWidth?: number;
    /**
     * Enable or disable the legend.
     * @default true
     */
    enabled?: boolean;
    /**
     * When the legend is floating, the plot area ignores it and is allowed to be placed below it.
     * @default false
     * @since 2.1
     */
    floating?: boolean;
    /**
     * In a legend with horizontal layout, the itemDistance defines the pixel distance between each item.
     * @default 20
     * @since 3.0.3
     */
    itemDistance?: number;
    /**
     * CSS styles for each legend item when the corresponding series or point is hidden. Only a subset of CSS is
     * supported, notably those options related to text. Properties are inherited from style unless overridden here.
     * @default {color: '#CCC'}
     */
    itemHiddenStyle?: CSSObject;
    /**
     * CSS styles for each legend item in hover mode. Only a subset of CSS is supported, notably those options related
     * to text. Properties are inherited from style unless overridden here.
     * @default {color: '#000'}
     */
    itemHoverStyle?: CSSObject;
    /**
     * The pixel bottom margin for each legend item.
     * @default 0
     * @since 2.2.0
     */
    itemMarginBottom?: number;
    /**
     * The pixel top margin for each legend item.
     * @default 0
     * @since 2.2.0
     */
    itemMarginTop?: number;
    /**
     * CSS styles for each legend item. Only a subset of CSS is supported, notably those options related to text.
     * @default { 'color': '#333333', 'cursor': 'pointer', 'fontSize': '12px', 'fontWeight': 'bold' }
     */
    itemStyle?: CSSObject;
    /**
     * The width for each legend item. This is useful in a horizontal layout with many items when you want the items to
     * align vertically.
     * @since 2.0
     */
    itemWidth?: number;
    /**
     * A format string for each legend label. Available variables relates to properties on the series, or the point in
     * case of pies.
     * @default '{name}'
     * @since 1.3
     */
    labelFormat?: string;
    /**
     * Callback function to format each of the series' labels. The this keyword refers to the series object, or the
     * point object in case of pie charts. By default the series or point name is printed.
     */
    labelFormatter?: () => string;
    /**
     * The layout of the legend items. Can be one of 'horizontal' or 'vertical'.
     * @default 'horizontal'
     */
    layout?: string;
    /**
     * Line height for the legend items. Deprecated as of 2.1. Instead, the line height for each item can be set using
     * itemStyle.lineHeight, and the padding between items using itemMarginTop and itemMarginBottom.
     * @default 16
     * @since 2.0
     * @deprecated
     */
    lineHeight?: number;
    /**
     * If the plot area sized is calculated automatically and the legend is not floating, the legend margin is the space
     * between the legend and the axis labels or plot area.
     * @default 12
     * @since 2.1
     */
    margin?: number;
    /**
     * Maximum pixel height for the legend. When the maximum height is extended, navigation will show.
     * @since 2.3.0
     */
    maxHeight?: number;
    /**
     * Options for the paging or navigation appearing when the legend is overflown.
     */
    navigation?: LegendNavigationOptions;
    /**
     * The inner padding of the legend box.
     * @default 8
     * @since 2.2.0
     */
    padding?: number;
    /**
     * Whether to reverse the order of the legend items compared to the order of the series or points as defined in the
     * configuration object.
     * @default false
     * @since 1.2.5
     */
    reversed?: boolean;
    /**
     * Whether to show the symbol on the right side of the text rather than the left side. This is common in Arabic and
     * Hebraic.
     * @default false
     * @since 2.2
     */
    rtl?: boolean;
    /**
     * Whether to apply a drop shadow to the legend. A backgroundColor also needs to be applied for this to take effect.
     * Since 2.3 the shadow can be an object configuration containing color, offsetX, offsetY, opacity and width.
     * @default false
     */
    shadow?: boolean | Shadow;
    /**
     * CSS styles for the legend area. In the 1.x versions the position of the legend area was determined by CSS. In
     * 2.x, the position is determined by properties like align, verticalAlign, x and y, but the styles are still parsed
     * for backwards compatibility.
     * @deprecated
     */
    style?: CSSObject;
    /**
     * The pixel height of the symbol for series types that use a rectangle in the legend. Defaults to the font size of
     * legend items.
     * @since 3.0.8
     */
    symbolHeight?: number;
    /**
     * The pixel padding between the legend item symbol and the legend item text.
     * @default 5
     */
    symbolPadding?: number;
    /**
     * The border radius of the symbol for series types that use a rectangle in the legend.
     * @default 0
     * @since 3.0.8
     */
    symbolRadius?: number;
    /**
     * The pixel width of the legend item symbol.
     * @default 16
     */
    symbolWidth?: number;
    /**
     * A title to be added on top of the legend.
     * @since 3.0
     */
    title?: LegendTitleOptions;
    /**
     * Whether to use HTML to render the legend item texts. Prior to 4.1.7, when using HTML, legend.navigation was
     * disabled.
     * @default false
     */
    useHTML?: boolean;
    /**
     * The vertical alignment of the legend box. Can be one of 'top', 'middle' or 'bottom'. Vertical position can be
     * further determined by the y option.
     *
     * In the case that the legend is aligned in a corner position, the layout option will determine whether to place it
     * above/below or on the side of the plot area.
     *
     * @default 'bottom'
     * @since 2.0
     */
    verticalAlign?: string;
    /**
     * The width of the legend box.
     * @since 2.0
     */
    width?: number;
    /**
     * The x offset of the legend relative to its horizontal alignment align within chart.spacingLeft and
     * chart.spacingRight. Negative x moves it to the left, positive x moves it to the right.
     * @default 0
     * @since 2.0
     */
    x?: number;
    /**
     * The vertical offset of the legend relative to it's vertical alignment verticalAlign within chart.spacingTop and
     * chart.spacingBottom. Negative y moves it up, positive y moves it down.
     * @default 0
     * @since 2.0
     */
    y?: number;
}

/**
 * The loading options control the appearance of the loading screen that covers the plot area on chart operations. This
 * screen only appears after an explicit call to chart.showLoading(). It is a utility for developers to communicate to
 * the end user that something is going on, for example while retrieving new data via an XHR connection. The
 * 'Loading...' text itself is not part of this configuration object, but part of the lang object.
 */
interface LoadingOptions {
    /**
     * The duration in milliseconds of the fade out effect.
     * @default 100
     * @since 1.2.0
     */
    hideDuration?: number;
    /**
     * CSS styles for the loading label span.
     * @default { 'fontWeight': 'bold', 'position': 'relative', 'top': '45%' }
     */
    labelStyle?: CSSObject;
    /**
     * The duration in milliseconds of the fade in effect.
     * @default 100
     * @since 1.2.0
     */
    showDuration?: number;
    /**
     * CSS styles for the loading screen that covers the plot area.
     * @default { position: 'absolute', backgroundColor: 'white', opacity: 0.5, textAlign: 'center' }
     */
    style?: Object;
}

/**
 * A collection of options for buttons and menus appearing in the exporting module.
 */
interface NavigationOptions {
    /**
     * A collection of options for buttons appearing in the exporting module.
     */
    buttonOptions?: Button;
    /**
     * CSS styles for the hover state of the individual items within the popup menu appearing by default when the export
     * icon is clicked. The menu items are rendered in HTML.
     * @default {background: '#4572A5', color: '#FFFFFF'}
     * @since 2.0
     */
    menuItemHoverStyle?: Object;
    /**
     * CSS styles for the individual items within the popup menu appearing by default when the export icon is clicked.
     * The menu items are rendered in HTML.
     * @default { padding: '0 5px', background: NONE, color: '#303030'}
     * @since 2.0
     */
    menuItemStyle?: Object;
    /**
     * CSS styles for the popup menu appearing by default when the export icon is clicked. This menu is rendered in
     * HTML.
     * @default { border: '1px solid #A0A0A0', background: '#FFFFFF' }
     * @since 2.0
     */
    menuStyle?: Object;
}

/**
 * Options for displaying a message like 'No data to display'. This feature requires the file no-data-to-display.js to
 * be loaded in the page. The actual text to display is set in the lang.noData option.
 */
interface NoDataOptions {
    /**
     * An object of additional SVG attributes for the no-data label.
     * @since 3.0.8
     */
    attr?: {};
    /**
     * The position of the no-data label, relative to the plot area.
     * @default { 'x': 0, 'y': 0, 'align': 'center', 'verticalAlign': 'middle' }
     * @since 3.0.8
     */
    position?: Position;
    /**
     * CSS styles for the no-data label.
     * @default { 'fontSize': '12px', 'fontWeight': 'bold', 'color': '#60606a' }
     */
    style?: CSSObject;
}

interface PaneBackground {
    /**
     * @default {linearGradient: { x1: 0, y1: 0, x2: 0, y2: 1 }, stops: [[0, '#FFF'],[1, '#DDD']]}
     */
    backgroundColor: string | Gradient;
    /**
     * @default 'silver'
     */
    borderColor?: string | Gradient;
    /**
     * @default 1
     */
    borderWidth?: number;
    /**
     * @default 0
     */
    innerRadius?: number | string;
    /**
     * @default '105%'
     */
    outerRadius?: number | string;
    /**
     * @default 'circle'
     */
    shape?: string;
}

/**
 * Applies only to polar charts and angular gauges. This configuration object holds general options for the combined X
 * and Y axes set. Each xAxis or yAxis can reference the pane by index.
 */
interface PaneOptions {
    /**
     * An object, or array of objects, for backgrounds. Sub options include backgroundColor (can be solid or gradient),
     * shape ('solid', 'arc' or 'circle'), innerWidth, outerWidth, borderWidth, borderColor.
     * @since 2.3.0
     */
    background?: PaneBackground | PaneBackground[];
    /**
     * The center of a polar chart or angular gauge, given as an array of [x, y] positions. Positions can be given as
     * integers that transform to pixels, or as percentages of the plot area size.
     * @default ['50%', '50%']
     * @since 2.3.0
     */
    center?: [number | string, number | string];
    /**
     * The end angle of the polar X axis or gauge value axis, given in degrees where 0 is north.
     * @default startAngle + 360
     * @since 2.3.0
     */
    endAngle?: number;
    /**
     * The size of the pane, either as a number defining pixels, or a percentage defining a percentage of the plot are.
     * @default '85%'
     */
    size?: number | string;
    /**
     * The size of the pane, either as a number defining pixels, or a percentage defining a percentage of the plot are
     * @since 2.3.0
     */
    startAngle?: number;
}

interface DataLabels {
    /**
     * The alignment of the data label compared to the point. If right, the right side of the label should be touching
     * the point. For points with an extent, like columns, the alignments also dictates how to align it inside the box,
     * as given with the inside option. Can be one of 'left', 'center' or 'right'.
     * @default 'center'
     */
    align?: string;
    /**
     * Whether to allow data labels to overlap. To make the labels less sensitive for overlapping, the
     * dataLabels.padding can be set to 0.
     * @default false
     * @since 4.1.0
     */
    allowOverlap?: boolean;
    /**
     * The background color or gradient for the data label.
     * @since 2.2.1
     */
    backgroundColor?: string | Gradient;
    /**
     * The border color for the data label.
     * @since 2.2.1
     */
    borderColor?: string | Gradient;
    /**
     * The border radius in pixels for the data label.
     * @default 0
     * @since 2.2.1
     */
    borderRadius?: number;
    /**
     * The border width in pixels for the data label.
     * @default 0
     * @since 2.2.1
     */
    borderWidth?: number;
    /**
     * The text color for the data labels.
     * @default null
     */
    color?: string | Gradient;
    /**
     * Whether to hide data labels that are outside the plot area. By default, the data label is moved inside the plot
     * area according to the overflow option.
     * @default 2.3.3
     */
    crop?: boolean;
    /**
     * Whether to defer displaying the data labels until the initial series animation has finished.
     * @default true
     * @since 4.0
     */
    defer?: boolean;
    /**
     * Enable or disable the data labels.
     * @default false
     */
    enabled?: boolean;
    /**
     * A format string for the data label. Available variables are the same as for formatter.
     * @default {y}
     * @since 3.0
     */
    format?: string;
    /**
     * Callback JavaScript function to format the data label. Note that if a format is defined, the format takes
     * precedence and the formatter is ignored.
     * Available data are:
     * - this.percentage Stacked series and pies only. The point's percentage of the total.
     * - this.point      The point object. The point name, if defined, is available through this.point.name.
     * - this.series     The series object. The series name is available through this.series.name.
     * - this.total      Stacked series only. The total value at this point's x value.
     * - this.x:         The x value.
     * - this.y:         The y value.
     */
    formatter?: () => string;
    /**
     * For points with an extent, like columns, whether to align the data label inside the box or to the actual value
     * point. Defaults to false in most cases, true in stacked columns.
     * @since 3.0
     */
    inside?: boolean;
    /**
     * How to handle data labels that flow outside the plot area. The default is 'justify', which aligns them inside the
     * plot area. For columns and bars, this means it will be moved inside the bar. To display data labels outside the
     * plot area, set crop to false and overflow to 'none'.
     * @default 'justify'
     * @since 3.0.6
     */
    overflow?: string;
    /**
     * When either the borderWidth or the backgroundColor is set, this  is the padding within the box.
     * @default 5
     * @since 2.2.1
     */
    padding?: number;
    /**
     * Text rotation in degrees. Note that due to a more complex structure, backgrounds, borders and padding will be
     * lost on a rotated data label.
     * @default 0
     */
    rotation?: number;
    /**
     * The shadow of the box. Works best with borderWidth or backgroundColor. Since 2.3 the shadow can be an object
     * configuration containing color, offsetX, offsetY, opacity and width.
     * @default false
     */
    shadow?: boolean | Shadow;
    /**
     * The name of a symbol to use for the border around the label. Symbols are predefined functions on the Renderer
     * object.
     * @default 'square'
     * @since 4.1.2
     */
    shape?: string;
    /**
     * Styles for the label.
     * @default {'color': 'contrast', 'fontSize': '11px', 'fontWeight': 'bold', 'textShadow': '0 0 6px contrast, 0 0 3px contrast' }
     * @since 4.1.0
     */
    style?: CSSObject;
    /**
     * Whether to {@link http://www.highcharts.com/docs/chart-concepts/labels-and-string-formatting#html|use HTML} to render the labels.
     * @default false
     */
    useHTML?: boolean;
    /**
     * The vertical alignment of a data label. Can be one of top, middle or bottom. The default value depends on the
     * data, for instance in a column chart, the label is above positive values and below negative values.
     * @since 2.3.3
     */
    verticalAlign?: string;
    /**
     * The x position offset of the label relative to the point.
     * @default 0
     */
    x?: number;
    /**
     * The y position offset of the label relative to the point.
     * @default -6
     */
    y?: number;
    /**
     * The Z index of the data labels. The default Z index puts it above the series. Use a Z index of 2 to display it
     * behind the series.
     * @default 6
     * @since 2.3.5
     */
    zIndex?: number;
}

interface PieDataLabels extends DataLabels {
    /**
     * The color of the line connecting the data label to the pie slice. The default color is the same as the point's
     * color. Defaults to {point.color}.
     * @since 2.1
     */
    connectorColor?: string;
    /**
     * The distance from the data label to the connector.
     * @default 5
     * @since 2.1
     */
    connectorPadding?: number;
    /**
     * The width of the line connecting the data label to the pie slice.
     * @default 1
     * @since 2.1
     */
    connectorWidth?: number;
    /**
     * The distance of the data label from the pie's edge. Negative numbers put the data label on top of the pie slices.
     * Connectors are only shown for data labels outside the pie.
     * @default 30
     * @since 2.1
     */
    distance?: number;
    /**
     * Whether to render the connector as a soft arc or a line with sharp break.
     * @default true
     * @since 2.1.7
     */
    softConnector?: boolean;
}

interface AreaCheckboxEvent extends Event {
    /**
     * The state of the checkbox
     */
    checked: boolean;
    /**
     * The checked item
     */
    item: SeriesObject | PointObject;
}

interface AreaClickEvent extends Event {
    /**
     * A pointer to the nearest point on the graph
     */
    point: PointObject;
}

interface PlotEvents {
    /**
     * Fires after the series has finished its initial animation, or in case animation is disabled, immediately as the
     * series is displayed.
     *
     * The this keyword refers to the Series object.
     * @since 4.0
     */
    afterAnimate?: (event: Event) => void;
    /**
     * Fires when the checkbox next to the series' name in the legend is clicked. One parameter, event, is passed to the
     * function. The state of the checkbox is found by event.checked. The checked item is found by event.item. Return
     * false to prevent the default action which is to toggle the select state of the series.
     *
     * The this keyword refers to the Series object.
     * @since 1.2.0
     */
    checkboxClick?: (event: AreaCheckboxEvent) => boolean | void;
    /**
     * Fires when the series is clicked. One parameter, event, is passed to the function. This contains common event
     * information based on jQuery or MooTools depending on which library is used as the base for Highcharts.
     * Additionally, event.point holds a pointer to the nearest point on the graph.
     *
     * The this keyword refers to the Series object.
     */
    click?: (event: AreaClickEvent) => void;
    /**
     * Fires when the series is hidden after chart generation time, either by clicking the legend item or by calling
     * .hide().
     *
     * The this keyword refers to the Series object.
     */
    hide?: () => void;
    /**
     * Fires when the legend item belonging to the series is clicked. One parameter, event, is passed to the function.
     * This contains common event information based on jQuery or MooTools depending on which library is used as the base
     * for Highcharts. The default action is to toggle the visibility of the series. This can be prevented by returning
     * false or calling event.preventDefault().
     *
     * The this keyword refers to the Series object.
     */
    legendItemClick?: (event: Event) => boolean | void;
    /**
     * Fires when the mouse leaves the graph. One parameter, event, is passed to the function. This contains common
     * event information based on jQuery or MooTools depending on which library is used as the base for Highcharts. If
     * the stickyTracking option is true, mouseOut doesn't happen before the mouse enters another graph or leaves the
     * plot area.
     *
     * The this keyword refers to the Series object.
     */
    mouseOut?: (event: Event) => void;
    /**
     * Fires when the mouse enters the graph. One parameter, event, is passed to the function. This contains common
     * event information based on jQuery or MooTools depending on which library is used as the base for Highcharts.
     *
     * The this keyword refers to the Series object.
     */
    mouseOver?: (event: Event) => void;
    /**
     * Fires when the series is shown after chart generation time, either by clicking the legend item or by calling
     * .show().
     *
     * The this keyword refers to the Series object.
     * @since 1.2.0
     */
    show?: () => void;
}

interface MarkerState {
    /**
     * Enable or disable the point marker. If null, the markers are hidden when the data is dense, and shown for more
     * widespread data points.
     * @default null, true for hover and select
     */
    enabled?: boolean;
    /**
     * The fill color of the point marker. When null, the series' or point's color is used.
     */
    fillColor?: string;
    /**
     * The color of the point marker's outline. When null, the series' or point's color is used.
     * @default '#FFFFFF', '#000000' for select state
     */
    lineColor?: string | Gradient;
    /**
     * The width of the point marker's outline.
     * @default 0
     */
    lineWidth?: number;
    /**
     * The radius of the point marker.
     * @default 4, undefined for hover and select
     */
    radius?: number;
}

interface MarkerHoverState extends MarkerState {
    /**
     * The additional line width for a hovered point.
     * @default 1
     * @since 4.0.3
     */
    lineWidthPlus?: number;
    /**
     * The number of pixels to increase the radius of the hovered point.
     * @default 2
     * @since 4.0.3
     */
    radiusPlus?: number;
}

interface Marker extends MarkerState {
    /**
     * Image markers only. Set the image width explicitly. When using this option, a width must also be set.
     * @default null
     * @since 4.0.4
     */
    height?: number;
    states?: {
        hover?: MarkerHoverState;
        /**
         * The appearance of the point marker when selected. In order to allow a point to be selected, set the
         * series.allowPointSelect option to true.
         */
        select?: MarkerState;
    };
    /**
     * A predefined shape or symbol for the marker. When null, the symbol is pulled from options.symbols. Other possible
     * values are 'circle', 'square', 'diamond', 'triangle' and 'triangle-down'.
     *
     * Additionally, the URL to a graphic can be given on this form: 'url(graphic.png)'. Note that for the image to be
     * applied to exported charts, its URL needs to be accessible by the export server.
     *
     * Custom callbacks for symbol path generation can also be added to Highcharts.SVGRenderer.prototype.symbols. The
     * callback is then used by its method name.
     */
    symbol?: string; // null, 'circle', 'square', 'diamond', 'triangle' 'triangle-down' or 'url(graphic.png)'
    /**
     * Image markers only. Set the image width explicitly. When using this option, a height must also be set.
     * @default null.
     * @since 4.0.4
     */
    width?: number;
}

interface PointEvents {
    /**
     * Fires when a point is clicked. One parameter, event, is passed to the function. This contains common event
     * information based on jQuery or MooTools depending on which library is used as the base for Highcharts.
     *
     * If the series.allowPointSelect option is true, the default action for the point's click event is to toggle the
     * point's select state. Returning false cancels this action.
     *
     * The this keyword refers to the Point object.
     */
    click?: (event: Event) => boolean;
    /**
     * Fires when the mouse leaves the area close to the point. One parameter, event, is passed to the function. This
     * contains common event information based on jQuery or MooTools depending on which library is used as the base for
     * Highcharts.
     *
     * The this keyword refers to the Point object.
     */
    mouseOut?: (event: Event) => void;
    /**
     * Fires when the mouse enters the area close to the point. One parameter, event, is passed to the function. This
     * contains common event information based on jQuery or MooTools depending on which library is used as the base for
     * Highcharts.
     *
     * The this keyword refers to the Point object.
     */
    mouseOver?: (event: Event) => void;
    /**
     * Fires when the point is removed using the .remove() method. One parameter, event, is passed to the function.
     * Returning false cancels the operation.
     *
     * The this keyword refers to the Point object.
     * @since 1.2.0
     */
    remove?: (event: Event) => boolean | void;
    /**
     * Fires when the point is selected either programmatically or following a click on the point. One parameter, event,
     * is passed to the function. Returning false cancels the operation.
     *
     * The this keyword refers to the Point object.
     * @since 1.2.0
     */
    select?: (event: Event) => boolean | void;
    /**
     * Fires when the point is unselected either programmatically or following a click on the point. One parameter,
     * event, is passed to the function. Returning false cancels the operation.
     *
     * The this keyword refers to the Point object.
     * @since 1.2.0
     */
    unselect?: (event: Event) => boolean | void;
    /**
     * Fires when the point is updated programmatically through the .update() method. One parameter, event, is passed to
     * the function. The new point options can be accessed through event.options. Returning false cancels the operation.
     *
     * The this keyword refers to the Point object.
     * @since 1.2.0
     */
    update?: (event: Event) => boolean|void;
    /**
     * Fires when the legend item belonging to the pie point (slice) is clicked.
     * The this keyword refers to the point itself. One parameter, event, is passed to the function.
     * This contains common event information based on jQuery or MooTools depending on which library is used as the base for Highcharts.
     * The default action is to toggle the visibility of the point. This can be prevented by calling event.preventDefault().
     */
    legendItemClick?: (event: Event) => boolean | void;
}

interface Halo {
    /**
     * A collection of SVG attributes to override the appearance of the halo, for example fill, stroke and stroke-width.
     * @since 4.0
     */
    attributes?: {};
    /**
     * Opacity for the halo unless a specific fill is overridden using the attributes setting. Note that Highcharts is
     * only able to apply opacity to colors of hex or rgb(a) formats.
     * @default 0.25
     * @since 4.0
     */
    opacity?: number;
    /**
     * The pixel size of the halo. For point markers this is the radius of the halo. For pie slices it is the width of
     * the halo outside the slice. For bubbles it defaults to 5 and is the width of the halo outside the bubble.
     * Defaults to 10.
     */
    size?: number;
}

interface LineStates {
    /**
     * Enable separate styles for the hovered series to visualize that the user hovers either the series itself or the
     * legend.
     * @default true
     * @since 1.2
     */
    enabled?: boolean;
    /**
     * Options for the halo appearing around the hovered point in line-type series as well as outside the hovered slice
     * in pie charts. By default the halo is filled by the current point or series color with an opacity of 0.25. The
     * halo can be disabled by setting the halo option to false.
     * @since 4.0
     */
    halo?: boolean | Halo;
    /**
     * Pixel with of the graph line.
     * @default 2
     */
    lineWidth?: number;
    /**
     * The additional line width for the graph of a hovered series.
     * @default 1
     * @since 4.0.3
     */
    lineWidthPlus?: number;
    marker?: Marker;
}

interface BarStates {
    /**
     * How much to brighten the point on interaction. Requires the main color to be defined in hex or rgb(a) format.
     * @default 0.1
     */
    brightness?: number;
    /**
     * Enable separate styles for the hovered series to visualize that the user hovers either the series itself or the
     * legend.
     * @default true
     * @since 1.2
     */
    enabled?: boolean;
    /**
     * Options for the halo appearing around the hovered point in line-type series as well as outside the hovered slice
     * in pie charts. By default the halo is filled by the current point or series color with an opacity of 0.25. The
     * halo can be disabled by setting the halo option to false.
     * @since 4.0
     */
    halo?: boolean | Halo;
}

interface PieStates extends BarStates, LineStates { }

interface AreaZone {
    /**
     * Defines the color of the series.
     * @since 4.1.0
     */
    color?: string | Gradient;
    /**
     * A name for the dash style to use for the graph.
     * @since 4.1.0
     */
    dashStyle?: string;
    /**
     * Defines the fill color for the series (in area type series)
     * @since 4.1.0
     */
    fillColor?: string;
    /**
     * The value up to where the zone extends, if undefined the zones stretches to the last value in the series.
     * @default undefined
     * @since 4.1.0
     */
    value?: number;
}

interface RangeDataLabels {
    /**
     * The alignment of the data label compared to the point. If right, the right side of the label should be touching
     * the point. For points with an extent, like columns, the alignments also dictates how to align it inside the box,
     * as given with the inside option. Can be one of 'left', 'center' or 'right'.
     * @default 'center'
     */
    align?: string;
    /**
     * Whether to allow data labels to overlap. To make the labels less sensitive for overlapping, the
     * dataLabels.padding can be set to 0.
     * @default false
     * @since 4.1.0
     */
    allowOverlap?: boolean;
    /**
     * The background color or gradient for the data label.
     * @default undefined
     * @since 2.2.1
     */
    backgroundColor?: string | Gradient;
    /**
     * The border color for the data label.
     * @default undefined
     * @since 2.2.1
     */
    borderColor?: string | Gradient;
    /**
     * The border radius in pixels for the data label.
     * @default 0
     * @since 2.2.1
     */
    borderRadius?: number;
    /**
     * The border width in pixels for the data label.
     * @default 0
     * @since 2.2.1
     */
    borderWidth?: number;
    /**
     * The text color for the data labels.
     * @default null
     */
    color?: string | Gradient;
    /**
     * Whether to hide data labels that are outside the plot area. By default, the data label is moved inside the plot
     * area according to the overflow option.
     * @default true
     * @since 2.3.3
     */
    crop?: boolean;
    /**
     * Whether to defer displaying the data labels until the initial series animation has finished.
     * @default true
     * @since 4.0
     */
    defer?: boolean;
    /**
     * Enable or disable the data labels.
     * @default false
     */
    enabled?: boolean;
    /**
     * A format string for the data label. Available variables are the same as for formatter.
     * @default '{y}'
     * @since 3.0
     */
    format?: string;
    /**
     * Callback JavaScript function to format the data label. Note that if a format is defined, the format takes
     * precedence and the formatter is ignored.
     * Available data are:
     * - this.percentage Stacked series and pies only. The point's percentage of the total.
     * - this.point      The point object. The point name, if defined, is available through this.point.name.
     * - this.series     The series object. The series name is available through this.series.name.
     * - this.total      Stacked series only. The total value at this point's x value.
     * - this.x:         The x value.
     * - this.y:         The y value.
     */
    formatter?: () => string;
    /**
     * For points with an extent, like columns, whether to align the data label inside the box or to the actual value
     * point. Defaults to false in most cases, true in stacked columns.
     * @since 3.0
     */
    inside?: boolean;
    /**
     * How to handle data labels that flow outside the plot area. The default is justify, which aligns them inside the
     * plot area. For columns and bars, this means it will be moved inside the bar. To display data labels outside the
     * plot area, set crop to false and overflow to 'none'.
     * @default 'justify'
     * @since 3.0.6
     */
    overflow?: string;
    /**
     * When either the borderWidth or the backgroundColor is set, this  is the padding within the box.
     * @default 5
     * @since 2.2.1
     */
    padding?: number;
    /**
     * Text rotation in degrees. Note that due to a more complex structure, backgrounds, borders and padding will be
     * lost on a rotated data label.
     * @default 0
     */
    rotation?: number;
    /**
     * The shadow of the box. Works best with borderWidth or backgroundColor. Since 2.3 the shadow can be an object
     * configuration containing color, offsetX, offsetY, opacity and width.
     * @default false
     * @since 2.2.1
     */
    shadow?: boolean | Shadow;
    /**
     * The name of a symbol to use for the border around the label. Symbols are predefined functions on the Renderer
     * object.
     * @default 'square'
     * @since 4.1.2
     */
    shape?: string;
    /**
     * Styles for the label.
     * @default {'color': 'contrast', 'fontSize': '11px', 'fontWeight': 'bold', 'textShadow': '0 0 6px contrast, 0 0 3px contrast' }
     * @since 4.1.0
     */
    style?: CSSObject;
    /**
     * Whether to {@link http://www.highcharts.com/docs/chart-concepts/labels-and-string-formatting#html|use HTML} to render the labels.
     * @default false
     */
    useHTML?: boolean;
    /**
     * The vertical alignment of a data label. Can be one of 'top', 'middle' or 'bottom'. The default value depends on the
     * data, for instance in a column chart, the label is above positive values and below negative values.
     * @since 2.3.3
     */
    verticalAlign?: string;
    /**
     * X offset of the higher data labels relative to the point value.
     * @default 0
     * @since 2.3.0
     */
    xHigh?: number;
    /**
     * X offset of the lower data labels relative to the point value.
     * @default 0
     * @since 2.3.0
     */
    xLow?: number;
    /**
     * Y offset of the higher data labels relative to the point value.
     * @default -6
     * @since 2.3.0
     */
    yHigh?: number;
    /**
     * Y offset of the lower data labels relative to the point value.
     * @default 16
     * @since 2.3.0
     */
    yLow?: number;
    /**
     * The Z index of the data labels. The default Z index puts it above the series. Use a Z index of 2 to display it
     * behind the series.
     * @default 6
     * @since 2.3.5
     */
    zIndex?: number;
}

interface Dial {
    /**
     * The background or fill color of the gauge's dial.
     * @default 'black'
     * @since 2.3.0
     */
    backgroundColor?: string | Gradient;
    /**
     * The length of the dial's base part, relative to the total radius or length of the dial.
     * @default '70%'.
     * @since 2.3.0
     */
    baseLength?: string;
    /**
     * The pixel width of the base of the gauge dial. The base is the part closest to the pivot, defined by baseLength.
     * @default 3
     * @since 2.3.0
     */
    baseWidth?: number;
    /**
     * The border color or stroke of the gauge's dial. By default, the borderWidth is 0, so this must be set in addition
     * to a custom border color.
     * @default 'silver'
     * @since 2.3.0
     */
    borderColor?: string | Gradient;
    /**
     * The width of the gauge dial border in pixels.
     * @default 0
     * @since 2.3.0
     */
    borderWidth?: number;
    /**
     * The radius or length of the dial, in percentages relative to the radius of the gauge itself.
     * @default '80%'
     * @since 2.3.0
     */
    radius?: string;
    /**
     * The length of the dial's rear end, the part that extends out on the other side of the pivot. Relative to the
     * dial's length.
     * @default '10%'
     * @since 2.3.0
     */
    rearLength?: string;
    /**
     * The width of the top of the dial, closest to the perimeter. The pivot narrows in from the base to the top.
     * @default 1
     * @since 2.3.0
     */
    topWidth?: number;
}

interface Pivot {
    /**
     * The background color or fill of the pivot.
     * @default 'black'
     * @since 2.3.0
     */
    backgroundColor?: string | Gradient;
    /**
     * The border or stroke color of the pivot. In able to change this, the borderWidth must also be set to something
     * other than the default 0.
     * @default 'silver'
     * @since 2.3.0
     */
    borderColor?: string | Gradient;
    /**
     * The border or stroke width of the pivot.
     * @default 0
     * @since 2.3.0
     */
    borderWidth?: number;
    /**
     * The pixel radius of the pivot.
     * @default 5
     * @since 2.3.0
     */
    radius?: number;
}

/**
 * Set options on specific levels. Takes precedence over series options, but not point options.
 */
interface TreeMapLevel {
    /**
     * Can set borderColor on all points which lies on the same level.
     * @since 4.1.0
     */
    borderColor?: string | Gradient;
    /**
     * et the dash style of the border of all the point which lies on the level.
     * @since 4.1.0
     */
    borderDashStyle?: string;
    /**
     * Can set the borderWidth on all points which lies on the same level.
     * @since 4.1.0
     */
    borderWidth?: number;
    /**
     * Can set a color on all points which lies on the same level.
     * @since 4.1.0
     */
    color?: string | Gradient;
    /**
     * Can set the options of dataLabels on each point which lies on the level.
     * @default undefined
     * @since 4.1.0
     */
    dataLabels?: DataLabels;
    /**
     * Can set the layoutAlgorithm option on a specific level.
     * @since 4.1.0
     */
    layoutAlgorithm?: string;
    /**
     * Can set the layoutStartingDirection option on a specific level.
     * @since 4.1.0
     */
    layoutStartingDirection?: string;
    /**
     * Decides which level takes effect from the options set in the levels object.
     * @since 4.1.0
     */
    level?: number;
}

/**
 * General options for all series types.
 */
interface SeriesChart {
    /**
     * Allow this series' points to be selected by clicking on the markers, bars or pie slices.
     * @default false
     * @since 1.2.0
     */
    allowPointSelect?: boolean;
    /**
     * Enable or disable the initial animation when a series is displayed. The animation can also be set as a
     * configuration object. Please note that this option only applies to the initial animation of the series itself.
     * For other animations, see chart.animation and the animation parameter under the API methods.
     * @default true
     */
    animation?: boolean | Animation;
    /**
     * The main color or the series. In line type series it applies to the line and the point markers unless otherwise
     * specified. In bar type series it applies to the bars unless a color is specified per point. The default value is
     * pulled from the options.colors array.
     */
    color?: string | Gradient;
    /**
     * Polar charts only. Whether to connect the ends of a line series plot across the extremes.
     * @default true
     * @since 2.3.0
     */
    connectEnds?: boolean;
    /**
     * Whether to connect a graph line across null points.
     * @default false
     */
    connectNulls?: boolean;
    /**
     * When the series contains less points than the crop threshold, all points are drawn, event if the points fall
     * outside the visible plot area at the current zoom. The advantage of drawing all points (including markers and
     * columns), is that animation is performed on updates. On the other hand, when the series contains more points than
     * the crop threshold, the series data is cropped to only contain points that fall within the plot area. The
     * advantage of cropping away invisible points is to increase performance on large series.
     * @default 300
     * @since 2.2
     */
    cropThreshold?: number;
    /**
     * You can set the cursor to 'pointer' if you have click events attached to the series, to signal to the user that
     * the points and lines can be clicked.
     */
    cursor?: string;
    /**
     * A name for the dash style to use for the graph. Applies only to series type having a graph, like line, spline,
     * area and scatter in case it has a lineWidth. The value for the dashStyle include:
     * - Solid
     * - ShortDash
     * - ShortDot
     * - ShortDashDot
     * - ShortDashDotDot
     * - Dot
     * - Dash
     * - LongDash
     * - DashDot
     * - LongDashDot
     * - LongDashDotDot
     * @default 'Solid'
     */
    dashStyle?: string;
    dataLabels?: DataLabels;
    /**
     * Enable or disable the mouse tracking for a specific series. This includes point tooltips and click events on
     * graphs and points. For large datasets it improves performance.
     * @default true
     */
    enableMouseTracking?: boolean;
    events?: PlotEvents;
    /**
     * Whether to use the Y extremes of the total chart width or only the zoomed area when zooming in on parts of the X
     * axis. By default, the Y axis adjusts to the min and max of the visible data. Cartesian series only.
     * @default false
     * @since 4.1.6
     */
    getExtremesFromAll?: boolean;
    /**
     * An array specifying which option maps to which key in the data point array. This makes it convenient to work with
     * unstructured data arrays from different sources.
     * @since 4.1.6
     */
    keys?: string[];
    /**
     * Pixel with of the graph line.
     * @default 2
     */
    lineWidth?: number;
    /**
     * The line cap used for line ends and line joins on the graph.
     * @default 'round'
     */
    linecap?: string;
    /**
     * The id of another series to link to. Additionally, the value can be ':previous' to link to the previous series.
     * When two series are linked, only the first one appears in the legend. Toggling the visibility of this also
     * toggles the linked series.
     * @since 3.0
     */
    linkedTo?: string;
    marker?: Marker;
    /**
     * The color for the parts of the graph or points that are below the threshold.
     * @default null.
     * @since 3.0
     */
    negativeColor?: string;
    point?: {
        events: PointEvents;
    };
    /**
     * If no x values are given for the points in a series, pointInterval defines the interval of the x values. For
     * example, if a series contains one value every decade starting from year 0, set pointInterval to 10.
     *
     * Since Highcharts 4.1, it can be combined with pointIntervalUnit to draw irregular intervals.
     * @default 1
     */
    pointInterval?: number;
    /**
     * On datetime series, this allows for setting the pointInterval to the two irregular time units, month and year.
     * Combine it with pointInterval to draw quarters, 6 months, 10 years etc.
     * @since 4.1.0
     */
    pointIntervalUnit?: string;
    /**
     * Possible values: null, 'on', 'between'.
     *
     * In a column chart, when pointPlacement is 'on', the point will not create any padding of the X axis. In a polar
     * column chart this means that the first column points directly north. If the pointPlacement is 'between', the
     * columns will be laid out between ticks. This is useful for example for visualising an amount between two points
     * in time or in a certain sector of a polar chart.
     *
     * Since Highcharts 3.0.2, the point placement can also be numeric, where 0 is on the axis value, -0.5 is between
     * this value and the previous, and 0.5 is between this value and the next. Unlike the textual options, numeric
     * point placement options won't affect axis padding.
     *
     * Note that pointPlacement needs a pointRange to work. For column series this is computed, but for line-type series
     * it needs to be set.
     *
     * Defaults to null in cartesian charts, 'between' in polar charts.
     * @since 2.3.0
     */
    pointPlacement?: string | number;
    /**
     * If no x values are given for the points in a series, pointStart defines on what value to start. For example, if a
     * series contains one yearly value starting from 1945, set pointStart to 1945.
     * @default 0
     */
    pointStart?: number;
    /**
     * Whether to select the series initially. If showCheckbox is true, the checkbox next to the series name will be
     * checked for a selected series.
     * @default false
     * @since 1.2.0
     */
    selected?: boolean;
    /**
     * Whether to apply a drop shadow to the graph line. Since 2.3 the shadow can be an object configuration containing
     * color, offsetX, offsetY, opacity and width.
     * @default false
     */
    shadow?: boolean | Shadow;
    /**
     * If true, a checkbox is displayed next to the legend item to allow selecting the series. The state of the checkbox
     * is determined by the selected option.
     * @default false
     * @since 1.2.0
     */
    showCheckbox?: boolean;
    /**
     * Whether to display this particular series or series type in the legend. The default value is true for standalone
     * series, false for linked series. Defaults to true.
     */
    showInLegend?: boolean;
    /**
     * When this is true, the series will not cause the Y axis to cross the zero plane (or threshold option) unless the
     * data actually crosses the plane.
     *
     * For example, if softThreshold is false, a series of 0, 1, 2, 3 will make the Y axis show negative values
     * according to the minPadding option. If softThreshold is true, the Y axis starts at 0.
     * @default true
     * @since 4.1.9
     */
    softTreshold?: boolean;
    /**
     * Whether to stack the values of each series on top of each other. Possible values are null to disable, 'normal' to
     * stack by value or 'percent'.
     */
    stacking?: string;
    /**
     * A wrapper object for all the series options in specific states.
     */
    states?: {
        /**
         * Options for the hovered series
         */
        hover?: LineStates;
    };
    /**
     * Sticky tracking of mouse events. When true, the mouseOut event on a series isn't triggered until the mouse moves
     * over another series, or out of the plot area. When false, the mouseOut event on a series is triggered when the
     * mouse leaves the area around the series' graph or markers. This also implies the tooltip. When stickyTracking is
     * false and tooltip.shared is false, the tooltip will be hidden when moving the mouse between series. Defaults to
     * true for line and area type series, but to false for columns, pies etc.
     * @default true
     * @since 2.0
     */
    stickyTracking?: boolean;
    /**
     * The Y axis value to serve as the base for the area, for distinguishing between values above and below a
     * threshold. If null, the area behaves like a line series with fill between the graph and the Y axis minimum.
     * @default 0
     * @since 2.0
     */
    threshold?: number;
    /**
     * A configuration object for the tooltip rendering of each single series. Properties are inherited from tooltip,
     * but only the following properties can be defined on a series level.
     * @since 2.3
     */
    tooltip?: SeriesTooltipOptions;
    /**
     * When a series contains a data array that is longer than this, only one dimensional arrays of numbers, or two
     * dimensional arrays with x and y values are allowed. Also, only the first point is tested, and the rest are
     * assumed to be the same format. This saves expensive data checking and indexing in long series. Set it to 0
     * disable.
     * @default 1000
     * @since 2.2
     */
    turboThreshold?: number;
    /**
     * Set the initial visibility of the series.
     * @default true
     */
    visible?: boolean;
    /**
     * Defines the Axis on which the zones are applied.
     * @default 'y'
     * @since 4.1.0
     */
    zoneAxis?: string;
    /**
     * An array defining zones within a series. Zones can be applied to the X axis, Y axis or Z axis for bubbles,
     * according to the zoneAxis option.
     */
    zones?: AreaZone[];
}

interface AreaChart extends SeriesChart {
    /**
     * Fill color or gradient for the area. When null, the series' color is used with the series' fillOpacity.
     */
    fillColor?: string | Gradient;
    /**
     * Fill opacity for the area. Note that when you set an explicit fillColor, the fillOpacity is not applied. Instead,
     * you should define the opacity in the fillColor with an rgba color definition.
     * @default 0.75
     */
    fillOpacity?: number;
    /**
     * A separate color for the graph line. By default the line takes the color of the series, but the lineColor setting
     * allows setting a separate color for the line without altering the fillColor.
     */
    lineColor?: string | Gradient;
    /**
     * A separate color for the negative part of the area.
     * @since 3.0
     */
    negativeFillColor?: string;
    /**
     * Whether to apply steps to the line. Possible values are left, center and right. Prior to 2.3.5, only left was
     * supported.
     *
     * @default 'false'
     * @since 1.2.5
     */
    step?: string;
    /**
     * Whether the whole area or just the line should respond to mouseover tooltips and other mouse or touch events.
     * @default false
     * @since 1.1.6
     */
    trackByArea?: boolean;
}

interface AreaRangeChart extends AreaChart {
    /**
     * Extended data labels for range series types. Range series data labels have no x and y options. Instead, they have
     * xLow, xHigh, yLow and yHigh options to allow the higher and lower data label sets individually.
     * @since 2.3.0
     */
    dataLabels?: RangeDataLabels;
}

interface AreaSplineChart extends AreaChart {
}

interface AreaSplineRangeChart extends AreaRangeChart {
}

interface BarChart extends SeriesChart {
    /**
     * The color of the border surrounding each column or bar.
     * @default '#FFFFFF'
     */
    borderColor?: string | Gradient;
    /**
     * The corner radius of the border surrounding each column or bar.
     * @default 0
     */
    borderRadius?: number;
    /**
     * The width of the border surrounding each column or bar.
     * @default 1
     */
    borderWidth?: number;
    /**
     * When using automatic point colors pulled from the options.colors collection, this option determines whether the
     * chart should receive one color per series or one color per point. Defaults to false.
     * @default false
     * @since 2.0
     */
    colorByPoint?: boolean;
    /**
     * A series specific or series type specific color set to apply instead of the global colors when colorByPoint is
     * true.
     * @since 3.0
     */
    colors?: string[];
    /**
     * Depth of the columns in a 3D column chart. Requires highcharts-3d.js.
     * @default 25
     * @since 4.0
     */
    depth?: number;
    /**
     * 3D columns only. The color of the edges. Similar to borderColor, except it defaults to the same color as the
     * column.
     */
    edgeColor?: string;
    /**
     * 3D columns only. The width of the colored edges.
     * @default 1
     */
    edgeWidth?: number;
    /**
     * Padding between each value groups, in x axis units.
     * @default 0.2
     */
    groupPadding?: number;
    /**
     * The spacing between columns on the Z Axis in a 3D chart. Requires highcharts-3d.js.
     * @default 1
     * @since 4.0
     */
    groupZPadding?: number;
    /**
     * Whether to group non-stacked columns or to let them render independent of each other. Non-grouped columns will be
     * laid out individually and overlap each other.
     * @default true
     * @since 2.3.0
     */
    grouping?: boolean;
    /**
     * The maximum allowed pixel width for a column, translated to the height of a bar in a bar chart. This prevents the
     * columns from becoming too wide when there is a small number of points in the chart.
     * @default null
     * @since 4.1.8
     */
    maxPointWidth?: number;
    /**
     * The minimal height for a column or width for a bar. By default, 0 values are not shown. To visualize a 0 (or
     * close to zero) point, set the minimal point length to a pixel value like 3. In stacked column charts,
     * minPointLength might not be respected for tightly packed values.
     * @default 0
     */
    minPointLength?: number;
    /**
     * Padding between each column or bar, in x axis units.
     * @default 0.1
     */
    pointPadding?: string | number;
    /**
     * The X axis range that each point is valid for. This determines the width of the column. On a categorized axis,
     * the range will be 1 by default (one category unit). On linear and datetime axes, the range will be computed as
     * the distance between the two closest data points.
     * @since 2.3
     */
    pointRange?: number;
    /**
     * A pixel value specifying a fixed width for each column or bar. When null, the width is calculated from the
     * pointPadding and groupPadding.
     * @since 1.2.5
     */
    pointWidth?: number;
    /**
     * A wrapper object for all the series options in specific states.
     */
    states?: {
        /**
         * Options for the hovered series
         */
        hover?: BarStates;
    };
}

/**
 * A box plot is a convenient way of depicting groups of data through their five-number summaries: the smallest
 * observation (sample minimum), lower quartile (Q1), median (Q2), upper quartile (Q3), and largest observation (sample
 * maximum).
 */
interface BoxPlotChart extends ErrorBarChart {
    /**
     * The fill color of the box.
     * @default '#FFFFFF'
     * @since 3.0
     */
    fillColor?: string;
    /**
     * Padding between each value groups, in x axis units.
     * @default 0.2
     */
    groupPadding?: number;
    /**
     * Whether to group non-stacked columns or to let them render independent of each other. Non-grouped columns will be
     * laid out individually and overlap each other.
     * @default true
     * @since 2.3.0
     */
    grouping?: boolean;
    /**
     * The id of another series to link to. Additionally, the value can be ':previous' to link to the previous series.
     * When two series are linked, only the first one appears in the legend. Toggling the visibility of this also
     * toggles the linked series.
     * @since 3.0
     */
    linkedTo?: string;
    /**
     * The color of the median line. If null, the general series color applies.
     * @default null
     * @since 3.0
     */
    medianColor?: string;
    /**
     * The pixel width of the median line. If null, the lineWidth is used.
     * @default 2
     * @since 3.0
     */
    medianWidth?: number;
}

/**
 * A bubble series is a three dimensional series type where each point renders an X, Y and Z value. Each points is drawn
 * as a bubble where the position along the X and Y axes mark the X and Y values, and the size of the bubble relates to
 * the Z value.
 */
interface BubbleChart extends SeriesChart {
    /**
     * Whether to display negative sized bubbles. The threshold is given by the zThreshold option, and negative bubbles
     * can be visualized by setting negativeColor.
     * @default true
     * @since 3.0
     */
    displayNegative?: boolean;
    /**
     * Maximum bubble size. Bubbles will automatically size between the minSize and maxSize to reflect the z value of
     * each bubble. Can be either pixels (when no unit is given), or a percentage of the smallest one of the plot width
     * and height.
     * @default '20%'
     * @since 3.0
     */
    maxSize?: string | number;
    /**
     * Minimum bubble size. Bubbles will automatically size between the minSize and maxSize to reflect the z value of
     * each bubble. Can be either pixels (when no unit is given), or a percentage of the smallest one of the plot width
     * and height.
     * @default 8
     * @since 3.0
     */
    minSize?: string | number;
    /**
     * When a point's Z value is below the zThreshold setting, this color is used.
     * @default null
     * @since 3.0
     */
    negativeColor?: string;
    /**
     * Whether the bubble's value should be represented by the area or the width of the bubble. The default, area,
     * corresponds best to the human perception of the size of each bubble.
     * @default 'area'
     * @since 3.0.7
     */
    sizeBy?: string;
    /**
     * When this is true, the absolute value of z determines the size of the bubble. This means that with the default
     * zThreshold of 0, a bubble of value -1 will have the same size as a bubble of value 1, while a bubble of value 0
     * will have a smaller size according to minSize.
     * @default false
     * @since 4.1.9
     */
    sizeByAbsoluteValues?: boolean;
    /**
     * The maximum for the Z value range. Defaults to the highest Z value in the data.
     * @default null
     * @since 4.0.3
     */
    zMax?: number;
    /**
     * The minimum for the Z value range. Defaults to the lowest Z value in the data.
     * @default null
     * @since 4.0.3
     */
    zMin?: number;
    /**
     * When displayNegative is false, bubbles with lower Z values are skipped. When displayNegative is true and a
     * negativeColor is given, points with lower Z is colored.
     * @default 0
     * @since 3.0
     */
    zThreshold?: number;
}

interface ColumnChart extends BarChart {
}

/**
 * The column range is a cartesian series type with higher and lower Y values along an X axis. Requires
 * highcharts-more.js. To display horizontal bars, set chart.inverted to true.
 */
interface ColumnRangeChart extends ColumnChart {
    dataLabels?: RangeDataLabels;
}

/**
 * Error bars are a graphical representation of the variability of data and are used on graphs to indicate the error, or
 * uncertainty in a reported measurement.
 */
interface ErrorBarChart extends SeriesChart {
    /**
     * When using automatic point colors pulled from the options.colors collection, this option determines whether the
     * chart should receive one color per series or one color per point.
     * @default false
     * @since 2.0
     */
    colorByPoint?: boolean;
    /**
     * A series specific or series type specific color set to apply instead of the global colors when colorByPoint is
     * true.
     * @since 3.0
     */
    colors?: string[];
    /**
     * Depth of the columns in a 3D column chart. Requires highcharts-3d.js.
     * @default 25
     * @since 4.0
     */
    depth?: number;
    /**
     * 3D columns only. The color of the edges. Similar to borderColor, except it defaults to the same color as the
     * column.
     */
    edgeColor?: string;
    /**
     * 3D columns only. The width of the colored edges.
     * @default 1
     */
    edgeWidth?: number;
    /**
     * The spacing between columns on the Z Axis in a 3D chart. Requires highcharts-3d.js.
     * @default 1
     * @since 4.0
     */
    groupZPadding?: number;
    /**
     * The parent series of the error bar. The default value links it to the previous series. Otherwise, use the id of
     * the parent series.
     * @default ':previous'
     * @since 3.0
     */
    linkedTo?: string;
    /**
     * The maximum allowed pixel width for a column, translated to the height of a bar in a bar chart. This prevents the
     * columns from becoming too wide when there is a small number of points in the chart.
     * @default null
     * @since 4.1.8
     */
    maxPointWidth?: number;
    /**
     * Padding between each column or bar, in x axis units.
     * @default 0.1
     */
    pointPadding?: number;
    /**
     * The X axis range that each point is valid for. This determines the width of the column. On a categorized axis,
     * the range will be 1 by default (one category unit). On linear and datetime axes, the range will be computed as
     * the distance between the two closest data points.
     * @since 2.3
     */
    pointRange?: number;
    /**
     * A pixel value specifying a fixed width for each column or bar. When null, the width is calculated from the
     * pointPadding and groupPadding.
     * @since 1.2.5
     */
    pointWidth?: number;
    /**
     * A wrapper object for all the series options in specific states.
     */
    states?: {
        /**
         * Options for the hovered series
         */
        hover?: BarStates;
    };
    /**
     * The color of the stem, the vertical line extending from the box to the whiskers. If null, the series color is
     * used.
     * @default null
     * @since 3.0
     */
    stemColor?: string;
    /**
     * The dash style of the stem, the vertical line extending from the box to the whiskers.
     * @default 'Solid'
     * @since 3.0
     */
    stemDashStyle?: string;
    /**
     * The width of the stem, the vertical line extending from the box to the whiskers. If null, the width is inherited
     * from the lineWidth option.
     * @default null
     * @since 3.0
     */
    stemWidth?: number;
    /**
     * The color of the whiskers, the horizontal lines marking low and high values. When null, the general series color
     * is used.
     * @default null
     * @since 3.0
     */
    whiskerColor?: string;
    /**
     * The length of the whiskers, the horizontal lines marking low and high values. It can be a numerical pixel value,
     * or a percentage value of the box width. Set 0 to disable whiskers.
     * @default '50%'
     * @since 3.0
     */
    whiskerLength?: number | string;
    /**
     * The line width of the whiskers, the horizontal lines marking low and high values. When null, the general
     * lineWidth applies.
     * @default 2
     * @since 3.0
     */
    whiskerWidth?: number;
}

/**
 * Funnel charts are a type of chart often used to visualize stages in a sales project, where the top are the initial
 * stages with the most clients. It requires that the modules/funnel.js file is loaded
 */
interface FunnelChart extends SeriesChart {
    /**
     * The color of the border surrounding each column or bar.
     * @default '#FFFFFF'
     */
    borderColor?: string | Gradient;
    /**
     * The width of the border surrounding each column or bar.
     * @default 1
     */
    borderWidth?: number;
    /**
     * The center of the series. By default, it is centered in the middle of the plot area, so it fills the plot area
     * height.
     * @default ['50%', '50%']
     * @since 3.0
     */
    center?: [string | number, string | number];
    /**
     * A series specific or series type specific color set to use instead of the global colors.
     * @since 3.0
     */
    colors?: string[];
    dataLabels?: PieDataLabels;
    /**
     * The thickness of a 3D pie. Requires highcharts-3d.js
     * @default 0
     * @since 4.0
     */
    depth?: number;
    /**
     * The height of the funnel or pyramid. If it is a number it defines the pixel height, if it is a percentage string
     * it is the percentage of the plot area height.
     * @since 3.0
     */
    height?: number | string;
    /**
     * The minimum size for a pie in response to auto margins. The pie will try to shrink to make room for data labels
     * in side the plot area, but only to this size.
     * @default 80
     * @since 3.0
     */
    minSize?: number;
    /**
     * The height of the neck, the lower part of the funnel. A number defines pixel width, a percentage string defines a
     * percentage of the plot area height.
     * @default '25%'
     */
    neckHeight?: number | string;
    /**
     * The width of the neck, the lower part of the funnel. A number defines pixel width, a percentage string defines a
     * percentage of the plot area width.
     * @default '30%'
     * @since 3.0
     */
    neckWidth?: number | string;
    /**
     * A reversed funnel has the widest area down. A reversed funnel with no neck width and neck height is a pyramid.
     * @default false
     * @since 3.0.10
     */
    reversed?: boolean;
    /**
     * If a point is sliced, moved out from the center, how many pixels should it be moved?
     * @default 10
     */
    slicedOffset?: number;
    /**
     * A wrapper object for all the series options in specific states.
     */
    states?: {
        /**
         * Options for the hovered series
         */
        hover?: PieStates;
    };
    /**
     * The width of the funnel compared to the width of the plot area, or the pixel width if it is a number.
     * @default '90%'
     * @since 3.0
     */
    width?: number | string;
}

/**
 * General plotting options for the gauge series type. Requires highcharts-more.js
 */
interface GaugeChart extends SeriesChart {
    /**
     * Data labels for the gauge. For gauges, the data labels are enabled by default and shown in a bordered box below
     * the point.
     */
    datalabels?: DataLabels;
    /**
     * Options for the dial or arrow pointer of the gauge.
     */
    dial?: Dial;
    /**
     * Allow the dial to overshoot the end of the perimeter axis by this many degrees. Say if the gauge axis goes from 0
     * to 60, a value of 100, or 1000, will show 5 degrees beyond the end of the axis. Defaults to 0.
     * @default 0
     * @since 3.0.10
     */
    overshoot?: number;
    /**
     * Options for the pivot or the center point of the gauge.
     * @since 2.3.0
     */
    pivot?: Pivot;
    /**
     * When this option is true, the dial will wrap around the axes. For instance, in a full-range gauge going from 0 to
     * 360, a value of 400 will point to 40. When wrap is false, the dial stops at 360.
     * @default true
     * @since 3.0
     */
    wrap?: boolean;
}

/**
 * The heatmap series type. This series type is available both in Highcharts and Highmaps.
 * The colors of each heat map point is usually determined by its value and controlled by settings on the colorAxis.
 */
interface HeatMapChart extends SeriesChart {
    /**
     * The color of the border surrounding each column or bar.
     * @default '#FFFFFF'
     */
    borderColor?: string | Gradient;
    /**
     * The corner radius of the border surrounding each column or bar.
     * @default 0
     */
    borderRadius?: number;
    /**
     * The width of the border surrounding each column or bar.
     * @default 1
     */
    borderWidth?: number;
    /**
     * When using automatic point colors pulled from the options.colors collection, this option determines whether the
     * chart should receive one color per series or one color per point. Defaults to false.
     * @default false
     * @since 2.0
     */
    colorByPoint?: boolean;
    /**
     * A series specific or series type specific color set to apply instead of the global colors when colorByPoint is
     * true.
     * @since 3.0
     */
    colors?: string[];
    /**
     * The columns size - how many X axis units each column in the heatmap should span.
     * @default 1
     * @since 4.0
     */
    colsize?: number;
    /**
     * When the series contains less points than the crop threshold, all points are drawn, event if the points fall
     * outside the visible plot area at the current zoom. The advantage of drawing all points (including markers and
     * columns), is that animation is performed on updates. On the other hand, when the series contains more points than
     * the crop threshold, the series data is cropped to only contain points that fall within the plot area. The
     * advantage of cropping away invisible points is to increase performance on large series.
     * @default 50
     */
    cropTreshold?: number;
    /**
     * The maximum allowed pixel width for a column, translated to the height of a bar in a bar chart. This prevents the
     * columns from becoming too wide when there is a small number of points in the chart.
     * @default null
     * @since 4.1.8
     */
    maxPointWidth?: number;
    /**
     * The row size - how many Y axis units each heatmap row should span.
     * @default 1
     * @since 4.0
     */
    rowsize?: number;
    /**
     * A wrapper object for all the series options in specific states.
     */
    states?: {
        /**
         * Options for the hovered series
         */
        hover?: BarStates;
    }
}

interface LineChart extends SeriesChart {
    /**
     * Whether to apply steps to the line. Possible values are left, center and right. Prior to 2.3.5, only left was
     * supported.
     * @default false
     * @since 1.2.5
     */
    step?: boolean | string;
}

/**
 * A pie chart is a circular chart divided into sectors, illustrating numerical proportion.
 */
interface PieChart extends SeriesChart {
    /**
     * The color of the border surrounding each slice. When null, the border takes the same color as the slice fill.
     * This can be used together with a borderWidth to fill drawing gaps created by antialiazing artefacts in
     * borderless pies.
     * @default '#FFFFFF'
     */
    borderColor?: string | Gradient;
    /**
     * The width of the border surrounding each column or bar.
     * @default 1
     */
    borderWidth?: number;
    /**
     * The center of the pie chart relative to the plot area. Can be percentages or pixel values. The default behaviour
     * (as of 3.0) is to center the pie so that all slices and data labels are within the plot area. As a consequence,
     * the pie may actually jump around in a chart with dynamic values, as the data labels move. In that case, the
     * center should be explicitly set, for example to ['50%', '50%'].
     * @default [null, null]
     */
    center?: [string | number, string | number];
    /**
     * A series specific or series type specific color set to use instead of the global colors.
     * @since 3.0
     */
    colors?: string[];
    dataLabels?: PieDataLabels;
    /**
     * The thickness of a 3D pie. Requires highcharts-3d.js
     * @default 0
     * @since 4.0
     */
    depth?: number;
    /**
     * The end angle of the pie in degrees where 0 is top and 90 is right. Defaults to startAngle plus 360.
     * @default null
     * @since 1.3.6
     */
    endAngle?: number;
    /**
     * Equivalent to chart.ignoreHiddenSeries, this option tells whether the series shall be redrawn as if the hidden
     * point were null.
     *
     * The default value changed from false to true with Highcharts 3.0.
     *
     * @default true
     * @since 2.3.0
     */
    ignoreHiddenPoint?: boolean;
    /**
     * The size of the inner diameter for the pie. A size greater than 0 renders a donut chart. Can be a percentage or
     * pixel value. Percentages are relative to the pie size. Pixel values are given as integers.
     *
     * Note: in Highcharts < 4.1.2, the percentage was relative to the plot area, not the pie size.
     * @default 0
     * @since 2.0
     */
    innerSize?: number | string;
    /**
     * The minimum size for a pie in response to auto margins. The pie will try to shrink to make room for data labels
     * in side the plot area, but only to this size.
     * @default 80
     * @since 3.0
     */
    minSize?: number;
    /**
     * The diameter of the pie relative to the plot area. Can be a percentage or pixel value. Pixel values are given as
     * integers. The default behaviour (as of 3.0) is to scale to the plot area and give room for data labels within the
     * plot area. As a consequence, the size of the pie may vary when points are updated and data labels more around. In
     * that case it is best to set a fixed value, for example '75%'.
     */
    size?: number | string;
    /**
     * If a point is sliced, moved out from the center, how many pixels should it be moved?
     * @default 10
     */
    slicedOffset?: number;
    /**
     * The start angle of the pie slices in degrees where 0 is top and 90 right.
     * @default 0
     * @since 2.3.4
     */
    startAngle?: number;
    /**
     * A wrapper object for all the series options in specific states.
     */
    states?: {
        /**
         * Options for the hovered series
         */
        hover?: PieStates;
    };
}

/**
 * A polygon series can be used to draw any freeform shape in the cartesian coordinate system. A fill is applied with
 * the color option, and stroke is applied through lineWidth and lineColor options. Requires the highcharts-more.js
 * file.
 */
interface PolygonChart extends SeriesChart {
    /**
     * The width of the line connecting the data points.
     * @default 0
     */
    lineWidth?: number;
}

interface PyramidChart extends SeriesChart {
    /**
     * The color of the border surrounding each slice
     * @default '#FFFFFF'
     */
    borderColor?: string | Gradient;
    /**
     * The width of the border surrounding each slice
     * @default 1
     */
    borderWidth?: number;
    /**
     * The center of the series. By default, it is centered in the middle of the plot area, so it fills the plot area
     * height.
     * @default ['50%', '50%']
     * @since 3.0
     */
    center?: [string | number, string | number];
    /**
     * A series specific or series type specific color set to use instead of the global colors.
     * @since 3.0
     */
    colors?: string[];
    dataLabels?: PieDataLabels;
    /**
     * The thickness of a 3D pie. Requires highcharts-3d.js
     * @default 0
     * @since 4.0
     */
    depth?: number;
    /**
     * The height of the funnel or pyramid. If it is a number it defines the pixel height, if it is a percentage string
     * it is the percentage of the plot area height.
     * @since 3.0
     */
    height?: number | string;
    /**
     * The minimum size for a pie in response to auto margins. The pie will try to shrink to make room for data labels
     * in side the plot area, but only to this size.
     * @default 80
     * @since 3.0
     */
    minSize?: number;
    /**
     * The pyramid is reversed by default, as opposed to the funnel, which shares the layout engine, and is not
     * reversed.
     * @default true
     * @since 3.0.10
     */
    reversed?: boolean;
    /**
     * If a point is sliced, moved out from the center, how many pixels should it be moved?
     * @default 10
     */
    slicedOffset?: number;
    /**
     * A wrapper object for all the series options in specific states.
     */
    states?: {
        /**
         * Options for the hovered series
         */
        hover?: PieStates;
    };
    /**
     * The width of the pyramid compared to the width of the plot area, or the pixel width if it is a number.
     * @default '90%'
     * @since 3.0
     */
    width?: number | string;
}

interface ScatterChart extends SeriesChart { }

/**
 * A gauge showing values using a filled arc with colors indicating the value. The solid gauge plots values against the
 * yAxis, which is extended with some color options, minColor, maxColor and stops, to control the color of the gauge
 * itself.
 */
interface SolidGaugeChart extends SeriesChart {
    /**
     * Allow the dial to overshoot the end of the perimeter axis by this many degrees. Say if the gauge axis goes from 0
     * to 60, a value of 100, or 1000, will show 5 degrees beyond the end of the axis.
     * @default 0
     * @since 3.0.10
     */
    overshoot?: number;
    /**
     * When this option is true, the dial will wrap around the axes. For instance, in a full-range gauge going from 0 to
     * 360, a value of 400 will point to 40. When wrap is false, the dial stops at 360.
     * @default true
     * @since 3.0
     */
    wrap?: boolean;
}

interface SplineChart extends SeriesChart { }

/**
 * The size of the point shape is determined by its value relative to its siblings values. Requires the module
 * heatmap.js as well, if functionality such as the colorAxis is to be used.
 */
interface TreeMapChart extends SeriesChart {
    /**
     * When enabled the user can click on a point which is a parent and zoom in on its children.
     * @default false
     * @since 4.1.0
     */
    allowDrillToNode?: boolean;
    /**
     * Enabling this option will make the treemap alternate the drawing direction between vertical and horizontal. The
     * next levels starting direction will always be the opposite of the previous.
     * @default false
     * @since 4.1.0
     */
    alternateStartingDirection?: boolean;
    /**
     * The color of the border surrounding each tree map item.
     * @default '#E0E0E0'
     */
    borderColor?: string | Gradient;
    /**
     * The width of the border surrounding each column or bar.
     * @default 1
     */
    borderWidth?: number;
    /**
     * When using automatic point colors pulled from the options.colors collection, this option determines whether the
     * chart should receive one color per series or one color per point.
     * @default false
     * @since 2.0
     */
    colorByPoint?: boolean;
    /**
     * A series specific or series type specific color set to apply instead of the global colors when colorByPoint is
     * true.
     * @since 3.0
     */
    colors?: string[];
    /**
     * This option decides if the user can interact with the parent nodes or just the leaf nodes. When this option is
     * undefined, it will be true by default. However when allowDrillToNode is true, then it will be false by default.
     * @since 4.1.2
     */
    interactByLeaf?: boolean;
    /**
     * This option decides which algorithm is used for setting position and dimensions of the points. Can be one of
     * 'sliceAndDice', 'stripes', 'squarified' or 'strip'.
     * @default 'sliceAndDice'
     * @since 4.1.0
     */
    layoutAlgorithm?: string;
    /**
     * Defines which direction the layout algorithm will start drawing. Possible values are 'vertical' and 'horizontal'.
     * @default 'vertical'
     * @since 4.1.0
     */
    layoutStartingDirection?: string;
    /**
     * Used together with the levels and allowDrillToNode options. When set to false the first level visible when
     * drilling is considered to be level one. Otherwise the level will be the same as the tree structure.
     * @default true
     * @since 4.1.0
     */
    levelIsConstant?: boolean;
    /**
     * Set options on specific levels. Takes precedence over series options, but not point options.
     */
    levels?: TreeMapLevel[];
    /**
     * The maximum allowed pixel width for a column, translated to the height of a bar in a bar chart. This prevents the
     * columns from becoming too wide when there is a small number of points in the chart.
     * @default null
     * @since 4.1.8
     */
    maxPointWidth?: number;
    /**
     * The sort index of the point inside the treemap level.
     * @since 4.1.10
     */
    sortIndex?: number;
    /**
     * A wrapper object for all the series options in specific states.
     */
    states?: {
        /**
         * Options for the hovered series
         */
        hover?: BarStates;
    }
}

interface WaterFallChart extends BarChart {
    /**
     * A name for the dash style to use for the graph. Applies only to series type having a graph, like line, spline,
     * area and scatter in case it has a lineWidth. The value for the dashStyle include:
     * - Solid
     * - ShortDash
     * - ShortDot
     * - ShortDashDot
     * - ShortDashDotDot
     * - Dot
     * - Dash
     * - LongDash
     * - DashDot
     * - LongDashDot
     * - LongDashDotDot
     * @default 'Dot'
     */
    dashStyle?: string;
    /**
     * The color of the line that connects columns in a waterfall series.
     * @default '#333333'
     * @since 3.0
     */
    lineColor?: string | Gradient;
    /**
     * The color used specifically for positive point columns. When not specified, the general series color is used.
     */
    upColor?: string;
}

/**
 * The plotOptions is a wrapper object for config objects for each series type. The config objects for each series can
 * also be overridden for each series item as given in the series array.
 *
 * Configuration options for the series are given in three levels. Options for all series in a chart are given in the
 * plotOptions.series object. Then options for all series of a specific type are given in the plotOptions of that type,
 * for example plotOptions.line. Next, options for one single series are given in the series array.
 */
interface PlotOptions {
    area?: AreaChart;
    arearange?: AreaRangeChart;
    areaspline?: AreaSplineChart;
    areasplinerange?: AreaSplineRangeChart;
    bar?: BarChart;
    boxplot?: BoxPlotChart;
    bubble?: BubbleChart;
    column?: ColumnChart;
    columnrange?: ColumnRangeChart;
    errorbar?: ErrorBarChart;
    funnel?: FunnelChart;
    gauge?: GaugeChart;
    heatmap?: HeatMapChart;
    line?: LineChart;
    pie?: PieChart;
    polygon?: PolygonChart;
    pyramid?: PyramidChart;
    scatter?: ScatterChart;
    series?: SeriesChart;
    solidgauge?: SolidGaugeChart;
    spline?: SplineChart;
    treemap?: TreeMapChart;
    waterfall?: WaterFallChart;
}

/* You will rarely, if ever, want to use this interface directly. Instead it is much more useful to use one of the derived
 * interfaces (AreaChartSeriesOptions, LineChartSeriesOptions, etc.)
 */
interface IndividualSeriesOptions {
    type?: string;
    /**
     * The main color or the series. In line type series it applies to the line and the point markers unless otherwise
     *     specified. In bar type series it applies to the bars unless a color is specified per point. The default
     *     value is pulled from the options.colors array.
     */
    color?: string | Gradient;
    /**
     * You can set the cursor to "pointer" if you have click events attached to the series, to signal to the user
     *     that the points and lines can be clicked.
     */
    cursor?: string;
    /**
     * An array of data points for the series. For the area series type, points can be given in the following ways:
     *
     * 1. An array of numerical values. In this case, the numerical values will be interpreted as y options. The x
     *    values will be automatically calculated, either starting at 0 and incremented by 1, or from pointStart and
     *    pointInterval given in the series options. If the axis has categories, these will be used. Example:
     *        data: [0, 5, 3, 5]
     *
     * 2. An array of arrays with 2 values. In this case, the values correspond to x,y. If the first value is a string,
     *    it is applied as the name of the point, and the x value is inferred.
     *        data: [
     *            [0, 9],
     *            [1, 7],
     *            [2, 6]
     *        ]
     *
     * 3. An array of objects with named values. The objects are point configuration objects as seen below. If the total
     *    number of data points exceeds the series' turboThreshold, this option is not available.
     *        data: [{
     *            x: 1,
     *            y: 9,
     *            name: 'Point2',
     *            color: '#00FF00'
     *        }, {
     *            x: 1,
     *            y: 6,
     *            name: 'Point1',
     *            color: '#FF00FF'
     *        }]
     */
    data?: number[] | [number, number][] | [string, number][] | DataPoint[];
    /**
     * An id for the series. This can be used after render time to get a pointer to the series object through
     * chart.get().
     */
    id?: string;
    /**
     * The index of the series in the chart, affecting the internal index in the chart.series array, the visible Z index
     * as well as the order in the legend.
     * @since 2.3.0
     */
    index?: number;
    /**
     * The sequential index of the series in the legend.
     */
    legendIndex?: number;
    /**
     * The name of the series as shown in the legend, tooltip etc.
     */
    name?: string;
    /**
     * A pixel value specifying a fixed width for each column or bar. When null, the width is calculated from
     * the pointPadding and groupPadding.
     */
    pointWidth?: number;
    /**
     * This option allows grouping series in a stacked chart. The stack option can be a string or a number or anything
     * else, as long as the grouped series' stack options match each other.
     * @since 2.1
     */
    stack?: any;
    /**
     * When using dual or multiple x axes, this number defines which xAxis the particular series is connected to. It
     * refers to either the axis id or the index of the axis in the xAxis array, with 0 being the first.
     * @default 0
     */
    xAxis?: string | number;
    /**
     * When using dual or multiple x axes, this number defines which xAxis the particular series is connected to. It
     * refers to either the axis id or the index of the axis in the xAxis array, with 0 being the first.
     * @default 0
     */
    yAxis?: string | number;
    /**
     * Define the visual z index of the series.
     */
    zIndex?: number;
}

interface SeriesOptions extends IndividualSeriesOptions, SeriesChart { }

interface AreaChartSeriesOptions extends IndividualSeriesOptions, AreaChart { }
interface AreaRangeChartSeriesOptions extends IndividualSeriesOptions, AreaRangeChart { }
interface AreaSplineChartSeriesOptions extends IndividualSeriesOptions, AreaSplineChart { }
interface AreaSplineRangeChartSeriesOptions extends IndividualSeriesOptions, AreaSplineRangeChart { }
interface BarChartSeriesOptions extends IndividualSeriesOptions, BarChart { }
interface BoxPlotChartSeriesOptions extends IndividualSeriesOptions, BoxPlotChart { }
interface BubbleChartSeriesOptions extends IndividualSeriesOptions, BubbleChart { }
interface ColumnChartSeriesOptions extends IndividualSeriesOptions, ColumnChart { }
interface ColumnRangeChartSeriesOptions extends IndividualSeriesOptions, ColumnRangeChart { }
interface ErrorBarChartSeriesOptions extends IndividualSeriesOptions, ErrorBarChart { }
interface FunnelChartSeriesOptions extends IndividualSeriesOptions, FunnelChart { }
interface GaugeChartSeriesOptions extends IndividualSeriesOptions, GaugeChart { }
interface HeatMapSeriesOptions extends IndividualSeriesOptions, HeatMapChart { }
interface LineChartSeriesOptions extends IndividualSeriesOptions, LineChart { }
interface PieChartSeriesOptions extends IndividualSeriesOptions, PieChart { }
interface PolygonChartSeriesOptions extends IndividualSeriesOptions, PolygonChart { }
interface PyramidChartSeriesOptions extends IndividualSeriesOptions, PyramidChart { }
interface ScatterChartSeriesOptions extends IndividualSeriesOptions, ScatterChart { }
interface SolidGaugeChartSeriesOptions extends IndividualSeriesOptions, SolidGaugeChart { }
interface SplineChartSeriesOptions extends IndividualSeriesOptions, SplineChart { }
interface TreeMapChartSeriesOptions extends IndividualSeriesOptions, TreeMapChart { }
interface WaterFallChartSeriesOptions extends IndividualSeriesOptions, WaterFallChart { }

interface DataPoint {
    /**
     * Individual color for the point. By default the color is pulled from the global colors array.
     * @default undefined
     */
    color?: string | Gradient;
    /**
     * Serves a purpose only if a colorAxis object is defined in the chart options. This value will decide which color
     * the point gets from the scale of the colorAxis.
     * @default undefined
     */
    colorValue?: number;
    /**
     * Individual data label for each point. The options are the same as the ones for plotOptions.series.dataLabels
     */
    dataLabels?: DataLabels;
    /**
     * The id of a series in the drilldown.series array to use for a drilldown for this point.
     * @since 3.0.8
     */
    drilldown?: string;
    /**
     * Individual point events
     */
    events?: PointEvents;
    /**
     * The high or maximum value for each data point.
     */
    high?: number;
    /**
     * An id for the point. This can be used after render time to get a pointer to the point object through chart.get().
     * @since 1.2.0
     */
    id?: string;
    /**
     * The inner radius of an individual point in a solid gauge. Can be given as a number (pixels) or percentage string.
     * @since 4.1.6
     */
    innerRadius?: number|string;
    /**
     * When this property is true, the points acts as a summary column for the values added or substracted since the
     * last intermediate sum, or since the start of the series. The y value is ignored.
     * @default false
     */
    isIntermediateSum?: boolean;
    /**
     * When this property is true, the point display the total sum across the entire series. The y value is ignored.
     * @default false
     */
    isSum?: boolean;
    /**
     * The sequential index of the data point in the legend.
     */
    legendIndex?: number;
    /**
     * The low or minimum value for each data point.
     */
    low?: number;
    marker?: Marker;
    /**
     * The median for each data point. This is drawn as a line through the middle area of the box.
     */
    median?: number;
    /**
     * The name of the point as shown in the legend, tooltip, dataLabel etc.
     *
     * If the xAxis.type is set to category, and no categories option exists, the category will be pulled from the
     * point.name of the last series defined. For multiple series, best practice however is to define xAxis.categories.
     */
    name?: string;
    /**
     * Only for treemap. Use this option to build a tree structure. The value should be the id of the point which is the
     * parent. If no points has a matching id, or this option is undefined, then the parent will be set to the root.
     * @default undefined
     * @since 4.1.0
     */
    parent?: string;
    /**
     * The lower quartile for each data point. This is the bottom of the box.
     */
    q1?: number;
    /**
     * The higher quartile for each data point. This is the top of the box.
     */
    q3?: number;
    /**
     * The outer radius of an individual point in a solid gauge. Can be given as a number (pixels) or percentage string.
     * @since 4.1.6
     */
    radius?: number|string;
    /**
     * Whether the data point is selected initially.
     * @default false
     */
    selected?: boolean;
    /**
     * Whether to display a slice offset from the center.
     * @default false
     */
    sliced?: boolean;
    /**
     * The value of the point, resulting in a relative area of the point in the treemap.
     */
    value?: number;
    /**
     * The x value of the point. For datetime axes, the X value is the timestamp in milliseconds since 1970.
     */
    x?: number;
    /**
     * The y value of the point.
     */
    y?: number;
    /**
     * The size value for each bubble. The bubbles' diameters are computed based on the z, and controlled by series
     * options like minSize, maxSize, sizeBy, zMin and zMax.
     */
    z?: number;
}

/**
 * The chart's subtitle
 */
interface SubtitleOptions {
    /**
     * The horizontal alignment of the subtitle. Can be one of 'left', 'center' and 'right'.
     * @default 'center'
     * @since 2.0
     */
    align?: string;
    /**
     * When the subtitle is floating, the plot area will not move to make space for it.
     * @default false
     * @since 2.1
     */
    floating?: boolean;
    /**
     * CSS styles for the title. Exact positioning of the title can be achieved by changing the margin property, or by
     * adding position: 'absolute' and left and top properties.
     * @default { 'color': '#555555' }
     */
    style?: Object;
    /**
     * The subtitle of the chart.
     */
    text?: string;
    /**
     * Whether to {@link http://www.highcharts.com/docs/chart-concepts/labels-and-string-formatting#html|use HTML} to render the text.
     * @default false
     */
    useHTML?: boolean;
    /**
     * The vertical alignment of the title. Can be one of 'top', 'middle' and 'bottom'. When a value is given, the title
     * behaves as floating.
     * @since 2.1
     */
    verticalAlign?: string;
    /**
     * The x position of the subtitle relative to the alignment within chart.spacingLeft and chart.spacingRight.
     * @default 0
     * @since 2.0
     */
    x?: number;
    /**
     * The y position of the subtitle relative to the alignment within chart.spacingTop and chart.spacingBottom. By
     * default the subtitle is laid out below the title unless the title is floating.
     * @default null
     * @since 2.0
     */
    y?: number;
}

interface TitleOptions {
    /**
     * The horizontal alignment of the title. Can be one of 'left', 'center' and 'right'.
     * @default 'center'
     * @since 2.0
     */
    align?: string;
    /**
     * When the title is floating, the plot area will not move to make space for it.
     * @default false
     * @since 2.1
     */
    floating?: boolean;
    /**
     * The margin between the title and the plot area, or if a subtitle is present, the margin between the subtitle and
     * the plot area.
     * @default 15
     * @since 2.1
     */
    margin?: number;
    /**
     * CSS styles for the title. Exact positioning of the title can be achieved by changing the margin property, or by
     * adding position: 'absolute' and left and top properties.
     * @default { 'color': '#333333', 'fontSize': '18px' }
     */
    style?: Object;
    /**
     * The title of the chart. To disable the title, set the text to null.
     * @default 'Chart title'
     */
    text?: string;
    /**
     * Whether to {@link http://www.highcharts.com/docs/chart-concepts/labels-and-string-formatting#html|use HTML} to render the text.
     * @default false
     */
    useHTML?: boolean;
    /**
     * The vertical alignment of the title. Can be one of 'top', 'middle' and 'bottom'. When a value is given, the title
     * behaves as floating.
     * @since 2.1
     */
    verticalAlign?: string;
    /**
     * The x position of the title relative to the alignment within chart.spacingLeft and chart.spacingRight.
     * @default 0
     * @since 2.0
     */
    x?: number;
    /**
     * The y position of the title relative to the alignment within chart.spacingTop and chart.spacingBottom. By default
     * it depends on the font size.
     * @default null
     * @since 2.0
     */
    y?: number;
}

interface CrosshairObject {
    color?: string | Gradient;
    width?: number;
    dashStyle?: string; //Solid ShortDash ShortDot ShortDashDot ShortDashDotDot Dot Dash LongDash DashDot LongDashDot LongDashDotDot
    zIndex?: number;
}

interface PlotPoint {
    plotX: number;
    plotY: number;
}

interface TooltipOptions extends SeriesTooltipOptions {
    /**
     * Enable or disable animation of the tooltip. In slow legacy IE browsers the animation is disabled by default.
     * @default true
     * @since 2.3.0
     */
    animation?: boolean;
    /**
     * The background color or gradient for the tooltip.
     * @default 'rgba(255, 255, 255, 0.85)'
     */
    backgroundColor?: string | Gradient;
    /**
     * The color of the tooltip border. When null, the border takes the color of the corresponding series or point.
     * @default null
     */
    borderColor?: string | Gradient;
    /**
     * The radius of the rounded border corners.
     * @default 3
     */
    borderRadius?: number;
    /**
     * The pixel width of the tooltip border.
     * @default 1
     */
    borderWidth?: number;
    /**
     * Display crosshairs to connect the points with their corresponding axis values. The crosshairs can be defined as a
     * boolean, an array of booleans or an object.
     *
     * Boolean
     *   If the crosshairs option is true, a single crosshair relating to the x axis will be shown.
     *
     * Array of booleans
     *   In an array of booleans, the first value turns on the x axis crosshair and the second value to the y axis
     *   crosshair. Use [true, true] to show complete crosshairs.
     *
     * Array of objects
     *   In an array of objects, the first value applies to the x axis crosshair and the second value to the y axis
     *   crosshair. For each dimension, a width, color, dashStyle and zIndex can be given.
     *
     * @default null
     */
    crosshairs?: boolean | [boolean, boolean] | CrosshairObject | [CrosshairObject, CrosshairObject];
    /**
     * Enable or disable the tooltip.
     * @default true
     */
    enabled?: boolean;
    /**
     * Callback function to format the text of the tooltip. Return false to disable tooltip for a specific point on
     * series.
     *
     * A subset of HTML is supported. The HTML of the tooltip is parsed and converted to SVG, therefore this isn't a
     * complete HTML renderer. The following tabs are supported: <b>, <strong>, <i>, <em>, <br/>, <span>. Spans can be
     * styled with a style attribute, but only text-related CSS that is shared with SVG is handled.
     *
     * Since version 2.1 the tooltip can be shared between multiple series through the shared option. The available data
     * in the formatter differ a bit depending on whether the tooltip is shared or not. In a shared tooltip, all
     * properties except x, which is common for all points, are kept in an array, this.points.
     *
     * Available data are:
     * this.percentage (not shared) / this.points[i].percentage (shared)
     *   Stacked series and pies only. The point's percentage of the total.
     * this.point (not shared) / this.points[i].point (shared)
     *   The point object. The point name, if defined, is available through this.point.name.
     * this.points
     *   In a shared tooltip, this is an array containing all other properties for each point.
     * this.series (not shared) / this.points[i].series (shared)
     *   The series object. The series name is available through this.series.name.
     * this.total (not shared) / this.points[i].total (shared)
     *   Stacked series only. The total value at this point's x value.
     * this.x
     *   The x value. This property is the same regardless of the tooltip being shared or not.
     * this.y (not shared) / this.points[i].y (shared)
     *   The y value.
     */
    formatter?: () => boolean | string;
    /**
     * A callback function to place the tooltip in a default position. The callback receives three parameters:
     * labelWidth, labelHeight and point, where point contains values for plotX and plotY telling where the reference
     * point is in the plot area. Add chart.plotLeft and chart.plotTop to get the full coordinates.
     *
     * The return should be an object containing x and y values, for example { x: 100, y: 100 }.
     * @since 2.2.4
     */
    positioner?: (labelWidth: number, labelHeight: number, point: PlotPoint) => { x: number; y: number; };
    /**
     * Whether to apply a drop shadow to the tooltip.
     * @default true
     */
    shadow?: boolean;
    /**
     * The name of a symbol to use for the border around the tooltip. In Highcharts 3.x and less, the shape was square.
     * @default 'callout'
     * @since 4.0
     */
    shape?: string;
    /**
     * When the tooltip is shared, the entire plot area will capture mouse movement or touch events. Tooltip texts for
     * series types with ordered data (not pie, scatter, flags etc) will be shown in a single bubble. This is
     * recommended for single series charts and for tablet/mobile optimized charts.
     * @default false
     * @since 2.1
     */
    shared?: boolean;
    /**
     * Proximity snap for graphs or single points. Does not apply to bars, columns and pie slices. It defaults to 10 for
     * mouse-powered devices and 25 for touch devices. Note that since Highcharts 4.1 the whole plot area by default
     * captures pointer events in order to show the tooltip, so for tooltip.snap to make sense, stickyTracking must be
     * false.
     * @since 1.2.0
     */
    snap?: number;
    /**
     * CSS styles for the tooltip. The tooltip can also be styled through the CSS class .highcharts-tooltip
     * @default { color: '#333333', fontSize: '12px', padding: '8px' }
     */
    style?: Object;
    /**
     * Use HTML to render the contents of the tooltip instead of SVG. Using HTML allows advanced formatting like tables
     * and images in the tooltip. It is also recommended for rtl languages as it works around rtl bugs in early Firefox.
     * @default false
     * @since 2.2
     */
    useHTML?: boolean;
}

interface SeriesTooltipOptions {
    /**
     * For series on a datetime axes, the date format in the tooltip's header will by default be guessed based on the
     * closest data points. This member gives the default string representations used for each unit.
     */
    dateTimeLabelFormats?: DateTimeFormats;
    /**
     * Whether the tooltip should follow the mouse as it moves across columns, pie slices and other point types with an
     * extent. By default it behaves this way for scatter, bubble and pie series by override in the plotOptions for
     * those series types.
     *
     * For touch moves to behave the same way, followTouchMove must be true also.
     * @default false
     * @since 3.0
     */
    followPointer?: boolean;
    /**
     * Whether the tooltip should follow the finger as it moves on a touch device. If chart.zoomType is set, it will
     * override followTouchMove.
     * @default true
     * @since 3.0.1
     */
    followTouchMove?: boolean;
    /**
     * A string to append to the tooltip format.
     * @default 'false'
     * @since 2.2
     */
    footerFormat?: string;
    /**
     * The HTML of the tooltip header line. Variables are enclosed by curly brackets. Available variables are point.key,
     * series.name, series.color and other members from the point and series objects. The point.key variable contains
     * the category name, x value or datetime string depending on the type of axis. For datetime axes, the point.key
     * date format can be set using tooltip.xDateFormat.
     *
     * @default '<span style='font-size: 10px'>{point.key}</span><br/>'
     */
    headerFormat?: string;
    /**
     * The number of milliseconds to wait until the tooltip is hidden when mouse out from a point or chart.
     * @default 500
     * @since 3.0
     */
    hideDelay?: number;
    /**
     * The HTML of the point's line in the tooltip. Variables are enclosed by curly brackets. Available variables are
     * point.x, point.y, series.name and series.color and other properties on the same form. Furthermore, point.y can be
     * extended by the tooltip.valuePrefix and tooltip.valueSuffix variables. This can also be overridden for each
     * series, which makes it a good hook for displaying units.
     *
     * @default '<span style='color:{point.color}'>\u25CF</span> {series.name}: <b>{point.y}</b><br/>'
     * @since 2.2
     */
    pointFormat?: string;
    /**
     * A callback function for formatting the HTML output for a single point in the tooltip. Like the pointFormat
     * string, but with more flexibility.
     *
     * The this keyword refers to the Point object.
     * @since 4.1.0
     */
    pointFormatter?: () => string;
    /**
     * How many decimals to show in each series' y value. This is overridable in each series' tooltip options object.
     * The default is to preserve all decimals.
     * @since 2.2
     */
    valueDecimals?: number;
    /**
     * A string to prepend to each series' y value. Overridable in each series' tooltip options object.
     * @since 2.2
     */
    valuePrefix?: string;
    /**
     * A string to append to each series' y value. Overridable in each series' tooltip options object.
     * @since 2.2
     */
    valueSuffix?: string;
    /**
     * The format for the date in the tooltip header if the X axis is a datetime axis. The default is a best guess based
     * on the smallest distance between points in the chart.
     */
    xDateFormat?: string;
}

interface Options {
    /**
     * Options regarding the chart area and plot area as well as general chart options.
     */
    chart?: ChartOptions;
    colorAxis?: ColorAxisOptions | ColorAxisOptions[];
    /**
     * An array containing the default colors for the chart's series. When all colors are used, new colors are pulled
     * from the start again.
     *
     * Default colors can also be set on a series or series.type basis, see column.colors, pie.colors.
     *
     * @default ['#7cb5ec', '#434348', '#90ed7d', '#f7a35c', '#8085e9', '#f15c80', '#e4d354', '#2b908f', '#f45b5b', '#91e8e1']
     */
    colors?: string[];
    /**
     * Highchart by default puts a credits label in the lower right corner of the chart. This can be changed using these options.
     */
    credits?: CreditsOptions;
    /**
     * The Data module provides a simplified interface for adding data to a chart from sources like CVS, HTML tables or
     * grid views. See also the tutorial article on the Data module.
     *
     * It requires the modules/data.js file to be loaded.
     *
     * Please note that the default way of adding data in Highcharts, without the need of a module, is through the
     * series.data option.
     */
    data?: DataOptions;
    /**
     * Options for drill down, the concept of inspecting increasingly high resolution data through clicking on chart
     * items like columns or pie slices.
     *
     * The drilldown feature requires the drilldown.js file to be loaded, found in the modules directory of the download
     * package, or online at code.highcharts.com/modules/drilldown.js.
     */
    drilldown?: DrilldownOptions;
    /**
     * Options for the exporting module.
     */
    exporting?: ExportingOptions;
    /**
     * HTML labels that can be positioned anywhere in the chart area.
     */
    labels?: LabelsOptions;
    lang?: LangObject;
    /**
     * The legend is a box containing a symbol and name for each series item or point item in the chart.
     */
    legend?: LegendOptions;
    /**
     * The loading options control the appearance of the loading screen that covers the plot area on chart operations.
     * This screen only appears after an explicit call to chart.showLoading(). It is a utility for developers to
     * communicate to the end user that something is going on, for example while retrieving new data via an XHR
     * connection. The 'Loading...' text itself is not part of this configuration object, but part of the lang object.
     */
    loading?: LoadingOptions;
    /**
     * A collection of options for buttons and menus appearing in the exporting module.
     */
    navigation?: NavigationOptions;
    /**
     * Options for displaying a message like 'No data to display'. This feature requires the file no-data-to-display.js
     * to be loaded in the page. The actual text to display is set in the lang.noData option.
     */
    noData?: NoDataOptions;
    /**
     * Applies only to polar charts and angular gauges. This configuration object holds general options for the combined
     * X and Y axes set. Each xAxis or yAxis can reference the pane by index.
     */
    pane?: PaneOptions;
    /**
     * The plotOptions is a wrapper object for config objects for each series type. The config objects for each series
     * can also be overridden for each series item as given in the series array.
     *
     * Configuration options for the series are given in three levels. Options for all series in a chart are given in
     * the plotOptions.series object. Then options for all series of a specific type are given in the plotOptions of
     * that type, for example plotOptions.line. Next, options for one single series are given in the series array.
     */
    plotOptions?: PlotOptions;
    /**
     * The actual series to append to the chart. In addition to the members listed below, any member of the plotOptions
     * for that specific type of plot can be added to a series individually. For example, even though a general
     * lineWidth is specified in plotOptions.series, an individual lineWidth can be specified for each series.
     */
    series?: IndividualSeriesOptions[];
    /**
     * The chart's subtitle
     */
    subtitle?: SubtitleOptions;
    /**
     * The chart's main title.
     */
    title?: TitleOptions;
    /**
     * Options for the tooltip that appears when the user hovers over a series or point.
     */
    tooltip?: TooltipOptions;
    /**
     * The X axis or category axis. Normally this is the horizontal axis, though if the chart is inverted this is the
     * vertical axis. In case of multiple axes, the xAxis node is an array of configuration objects.
     */
    xAxis?: AxisOptions | AxisOptions[];
    /**
     * The Y axis or value axis. Normally this is the vertical axis, though if the chart is inverted this is the
     * horizontal axis. In case of multiple axes, the yAxis node is an array of configuration objects.
     */
    yAxis?: AxisOptions | AxisOptions[];
}

interface GlobalOptions extends Options {
    /**
     * Global options that don't apply to each chart. These options, like the lang options, must be set using the
     * Highcharts.setOptions method.
     */
    global?: GlobalObject;
    /**
     * Language object. The language object is global and it can't be set on each chart initiation. Instead, use
     * Highcharts.setOptions to set it before any chart is initiated.
     */
    lang?: LangObject;
}

interface DateFormatSpecifiers {
    [index: string]: (timestamp: number) => string;
}

/**
 * A chart can have from 0 axes (pie chart) to multiples. In a normal, single series cartesian chart, there is one X
 * axis and one Y axis.
 *
 * The X axis or axes are referenced by chart.xAxis, which is an array of Axis objects. If there is only one axis, it
 * can be referenced through chart.xAxis[0], and multiple axes have increasing indices. The same pattern goes for Y
 * axes.
 *
 * If you need to get the axes from a series object, use the series.xAxis andseries.yAxis properties. These are not
 * arrays, as one series can only be associated to one X and one Y axis.
 *
 * A third way to reference the axis programmatically is by id. Add an id in the axis configuration options, and get the
 * axis by chart.get(id).
 *
 * Configuration options for the axes are given in options.xAxis and options.yAxis.
 */
interface AxisObject {
    /**
     * Add a plot band after render time.
     * @param {PlotBands} options A configuration object consisting of the same members as options.xAxis.plotBands
     * @since 1.2.0
     */
    addPlotBand(options: PlotBands): void;
    /**
     * Add a plot line after render time.
     * @param {PlotLines} options A configuration object consisting of the same members as options.xAxis.plotLines
     * @since 1.2.0
     */
    addPlotLine(options: PlotLines): void;
    /**
     * Get the current extremes for the axis.
     * @since 1.2.0
     */
    getExtremes(): Extremes;
    /**
     * Remove an axis from the chart.
     * @param [boolean] redraw Defaults to true. Whether to redraw the chart following the remove.
     * @since 3.0
     */
    remove(redraw?: boolean): void;
    /**
     * Remove a plot band by its id.
     * @param {string} id The plot band's id as given in the original configuration object or in the addPlotBand method.
     * @since 1.2.0
     */
    removePlotBand(id: string): void;
    /**
     * Remove a plot line by its id.
     * @param {string} id The plot line's id as given in the original configuration object or in the addPlotLine method.
     * @since 1.2.0
     */
    removePlotLine(id: string): void;
    /**
     * Set new categories for the axis. Redraws.
     * @param {string[]} categories The new category names.
     * @since 1.2.0
     */
    setCategories(categories: string[]): void;
    /**
     * Set new categories for the axis.
     * @param {string[]} categories The new category names.
     * @param {boolean}  redraw     Whether to redraw the axis or wait for an explicit call to chart.redraw().
     * @since 1.2.0
     */
    setCategories(categories: string[], redraw: boolean): void;
    /**
     * Set the minimum and maximum of the axes after render time. If the startOnTick and endOnTick options are true, the
     * minimum and maximum values are rounded off to the nearest tick. To prevent this, these options can be set to
     * false before calling setExtremes. Also, setExtremes will not allow a range lower than the minRange option, which
     * by default is the range of five points.
     * @param {number} min The new minimum value
     * @param {number} max The new maximum value
     * @param {boolean} redraw Whether to redraw the chart or wait for an explicit call to chart.redraw().
     * @param {boolean | Animation} animation When true, the resize will be animated with default animation options. The animation can also be a configuration object with properties duration and easing.
     * @since 1.2.0
     */
		setExtremes(min?: number, max?: number, redraw?: boolean, animation?: boolean | Animation, eventArguments?: any): void;
    /**
     * Update the title of the axis after render time.
     * @param {AxisTitle} title  The new title options on the same format as given in xAxis.title.
     * @param {boolean}             redraw Whether to redraw the chart now or hold until the next chart.redraw()
     * @since 2.2
     */
    setTitle(title: AxisTitle, redraw?: boolean): void;
    /**
     * Translates a value in terms of axis units in to pixels within the chart.
     * @param  {number}  value           A value in terms of axis units.
     * @param  {boolean} paneCoordinates Whether to return the pixel coordinate relative to the chart or just the axis/pane itself.
     * @return {number}
     * @since 3.0
     */
    toPixels(value: number, paneCoordinates?: boolean): number;
    /**
     * Translate a pixel position along the axis to a value in terms of axis units.
     * @param  {number}  pixel           A pixel position along the axis.
     * @param  {boolean} paneCoordinates Whether the input pixel position is relative to the chart or just the axis/pane itself.
     * @return {number}
     * @since 3.0
     */
    toValue(pixel: number, paneCoordinates?: boolean): number;
    /**
     * Update an axis object with a new set of options. The options are merged with the existing options, so only new or
     * altered options need to be specified.
     * @param {AxisOptions} options The new options that will be merged in with existing options on the axis.
     * @param {boolean}               redraw  Defaults to true. Whether to redraw the chart after the new options are set.
     * @since 3.0
     */
    update(options: AxisOptions, redraw?: boolean): void;
}

/**
 * The chart object is the JavaScript object representing a single chart in the web page.The pointer to your chart
 * object is returned when a chart is created using the Highcharts.Chart() constructor:
 * var chart1 = new Highcharts.Chart(options);
 */
interface ChartObject {
    /**
     * Add an axis to the chart after render time. Note that this method should never be used when adding data
     * synchronously at chart render time, as it adds expense to the calculations and rendering. When adding data at the
     * same time as the chart is initiated, add the axis as a configuration option instead.
     * @param  {AxisOptions} options The Axis options, as documented under xAxis and yAxis.
     * @param  [boolean] isX Whether it is an X axis or Y axis
     * @param  [boolean] redraw Defaults to true. Whether to redraw the chart after the series is added. See the redraw() method.
     * @param  [boolean | Animation] animation Defaults to true. When true, the series' updating will be animated with default animation options. The animation can also be a configuration object with properties duration and easing.
     * @return {AxisObject}
     * @since 3.0
     */
    addAxis(options: AxisOptions, isX?: boolean, redraw?: boolean, animation?: boolean | Animation): AxisObject;
    /**
     * Add a series to the chart after render time. Note that this method should never be used when adding data
     * synchronously at chart render time, as it adds expense to the calculations and rendering. When adding data at the
     * same time as the chart is initiated, add the series as a configuration option instead.
     * @param {T} options The series options, as documented under plotOptions.series and under the plotOptions for each series type.
     * @param [boolean] redraw
     * @since 1.2.0
     */
    addSeries<T extends IndividualSeriesOptions>(options: T, redraw?: boolean, animation?: boolean | Animation): T;
    /**
     * Add a series to the chart as drilldown from a specific point in the parent series. This method is used for async
     * drilldown, when clicking a point in a series should result in loading and displaying a more high-resolution
     * series. When not async, the setup is simpler using the drilldown.series options structure.
     * @param {PointObject} point The existing Point object from which the drilldown will start.
     * @param {IndividualSeriesOptions} seriesOptions The series options, as documented under plotOptions.series and under the plotOptions for each series type.
     * @since 3.0.8
     */
    addSeriesAsDrilldown(point: PointObject, seriesOptions: IndividualSeriesOptions): void;
    /**
     * A reference to the containing HTML element, dynamically inserted into the element given in chart.renderTo.
     * @since 1.2.5
     */
    container: HTMLElement;
    /**
     * Removes the chart and purges memory. This method should be called before writing a new chart into the same
     * container. It is called internally on window unload to prevent leaks.
     * @since 1.2.2
     */
    destroy(): void;
    /**
     * When the chart is drilled down to a child series, calling chart.drillUp() will drill up to the parent series.
     * @since 3.0.8
     */
    drillUp(): void;
    /**
     * Exporting module required. Submit an SVG version of the chart to a server along with some parameters for
     * conversion.
     * @since 2.0
     */
    exportChart(): void;
    /**
     * Exporting module required. Submit an SVG version of the chart to a server along with some parameters for
     * conversion.
     * @param {ExportingOptions} options Exporting options. Out of the exporting options, the following options can be given as parameters to the exportChart method. All options default to the values given in the exporting config options. filename: the filename for the export without extension, url: the URL for the server module to do the conversion, width: the width of the PNG or JPEG image generated on the server, type: the MIME type of the converted image, sourceWidth: the width of the source (in-page) chart, sourceHeight: the height of the source chart.
     * @since 2.0
     */
    exportChart(options: ExportingOptions): void;
    /**
     * Exporting module required. Submit an SVG version of the chart to a server along with some parameters for
     * conversion.
     * @param {ExportingOptions} options Exporting options. Out of the exporting options, the following options can be given as parameters to the exportChart method. All options default to the values given in the exporting config options. filename: the filename for the export without extension, url: the URL for the server module to do the conversion, width: the width of the PNG or JPEG image generated on the server, type: the MIME type of the converted image, sourceWidth: the width of the source (in-page) chart, sourceHeight: the height of the source chart.
     * @param {Options} chartOptions Additional chart options for the exported chart. For example a different background color can be added here.
     * @since 2.0
     */
    exportChart(options: ExportingOptions, chartOptions: Options): void;
    /**
     * Export the chart to a PNG or SVG without sending it to a server. Requires
     * modules/exporting.js and modules/offline-exporting.js.
     * @since 2.0
     */
    exportChartLocal(): void;
    /**
     * Export the chart to a PNG or SVG without sending it to a server. Requires
     * modules/exporting.js and modules/offline-exporting.js.
     * @param {HighchartsExportingOptions} options Exporting options. Same as
     * the exportChart params.
     * @since 2.0
     */
    exportChartLocal(options: ExportingOptions): void;
    /**
     * Export the chart to a PNG or SVG without sending it to a server.
     * Requires modules/exporting.js and modules/offline-exporting.js.
     * @param {HighchartsExportingOptions} options Exporting options. Same as
     * the exportChart params.
     * @param {HighchartsOptions} chartOptions Additional chart options for the
     * exported chart. Same as the exportChart params.
     * @since 2.0
     */
    exportChartLocal(options: ExportingOptions, chartOptions: Options): void;
    /**
     * Get an axis, series or point by its id as given in the configuration options.
     * @param  {string} id The id of the axis, series or point to get.
     * @return {AxisObject|SeriesObject|PointObject}
     * @since 1.2.0
     */
    get(id: string): AxisObject | SeriesObject | PointObject;
    /**
     * Exporting module required. Get an SVG string representing the chart.
     * @param  {Options} additionalOptions Chart options to add to the exported chart in addition to the options given for the original chart. For example if series.lineWidth should be greater in the exported chart than in the original, or the chart should have a different background color, this is added here.
     * @return {string}
     * @since 2.0
     */
    getSVG(additionalOptions?: Options): string;
    /**
     * Returns an array of all currently selected points in the chart. Points can be selected either programmatically by
     * the point.select() method or by clicking.
     * @return {PointObject[]} An array of the selected points.
     * @since 1.2.0
     */
    getSelectedPoints(): PointObject[];
    /**
     * Returns an array of all currently selected series in the chart. Series can be selected either programmatically by
     * the series.select() method or by checking the checkbox next to the legend item if series.showCheckBox is true.
     * @return {SeriesObject[]} An array of the selected Series items.
     * @since 1.2.0
     */
    getSelectedSeries(): SeriesObject[];
    /**
     * Hide the loading screen. Options for the loading screen are defined at options.loading.
     * @since 1.2.0
     */
    hideLoading(): void;
    /**
     * The options structure for the chart.
     * @since 1.2.0
     */
    options: Options;
    /**
     * Exporting module required. Clears away other elements in the page and prints the chart as it is displayed. By
     * default, when the exporting module is enabled, a button at the upper left calls this method.
     * @since 2.0
     */
    print(): void;
    /**
     * Redraw the chart after changes have been done to the data or axis extremes. All methods for updating axes, series
     * or points have a parameter for redrawing the chart. This is true by default. But in many cases you want to do
     * more than one operation on the chart before redrawing, for example add a number of points. In those cases it is a
     * waste of resources to redraw the chart for each new point added. So you add the points and call chart.redraw()
     * after.
     * @param [boolean | Animation] animation Defaults to true. When true, the update will be animated with default animation options. The animation can also be a configuration object with properties duration and easing.
     * @since 1.2.0
     */
    redraw(animation?: boolean | Animation): void;
    /**
     * Reflows the chart to its container. By default, the chart reflows automatically to its container following a
     * window.resize event, as per the chart.reflow option. However, there are no reliable events for div resize, so if
     * the container is resized without a window resize event, this must be called explicitly.
     */
    reflow(): void;
    /**
     * An array of all the chart's series.
     * @type {SeriesObject[]}
     * @since 1.2.0
     */
    series: SeriesObject[];
    /**
     * Resize the chart to a given width and height.
     * @param {number} width The new pixel width of the chart.
     * @param {number} height The new pixel height of the chart.
     * @param {boolean | Animation} animation Defaults to true. When true, the resize will be animated with default animation options. The animation can also be a configuration object with properties duration and easing.
     */
    setSize(width: number, height: number, animation?: boolean | Animation): void;
    /**
     * Set a new title or subtitle for the chart
     * @param {TitleOptions} title A configuration object for the new title as defined at #title.
     * @param [SubtitleOptions] subtitle A configuration object for the new subtitle as defined at #subtitle.
     * @param [boolean] redraw Whether to redraw the chart. Defaults to true.
     * @since 2.1.0
     */
    setTitle(title: TitleOptions, subtitle?: SubtitleOptions, redraw?: boolean): void;
    /**
     * Dim the chart's plot area and show a loading label text. Options for the loading screen are defined at
     * options.loading. A custom text can be given as a parameter for loading.
     * @since 2.0.5
     */
    showLoading(str?: string): void;
    /**
     * This method is deprecated as of 2.0.1. Updating the chart position after a move operation is no longer necessary.
     * @since 1.2.5
     * @deprecated
     */
    updatePosition(): void;
    /**
     * An array of the chart's x axes. If only one x axis, it is referenced by chart.xAxis[0].
     * @since 1.2.0
     */
    xAxis: AxisObject[];
    /**
     * An array of the chart's y axes. If only one y axis, it is referenced by chart.yAxis[0].
     * @since 1.2.0
     */
    yAxis: AxisObject[];

    renderer: RendererObject;
}

interface Chart {
    /**
     * This is the constructor for creating a new chart object.
     * @param  {Options} options The chart options
     * @return {ChartObject}
     */
    new (options: Options): ChartObject;
    /**
     * This is the constructor for creating a new chart object.
     * @param {Options} options The chart options
     * @param callback A function to execute when the chart object is finished loading and rendering. In most cases the chart is built in one thread, but in Internet Explorer version 8 or less the chart is sometimes initiated before the document is ready, and in these cases the chart object will not be finished directly after callingnew Highcharts.Chart(). As a consequence, code that relies on the newly built Chart object should always run in the callback. Defining a chart.event.load handler is equivalent.
     * @return {ChartObject}
     */
    new (options: Options, callback: (chart: ChartObject) => void): ChartObject;
    /**
     * This is the constructor for creating a new chart object.
     * @param {string|HTMLElement} renderTo The id or a reference to a DOM element where the chart should be rendered (since v4.2.0).
     * @param {HighchartsOptions} options The chart options
     * @return {HighchartsChartObject}
     */
    new (renderTo: string | HTMLElement, options: Options): ChartObject;
    /**
     * This is the constructor for creating a new chart object.
     * @param {string|HTMLElement} renderTo The id or a reference to a DOM element where the chart should be rendered (since v4.2.0).
     * @param {HighchartsOptions} options The chart options
     * @param callback A function to execute when the chart object is finished loading and rendering. In most cases the chart is built in one thread, but in Internet Explorer version 8 or less the chart is sometimes initiated before the document is ready, and in these cases the chart object will not be finished directly after callingnew Highcharts.Chart(). As a consequence, code that relies on the newly built Chart object should always run in the callback. Defining a chart.event.load handler is equivalent.
     * @return {ChartObject}
     */
    new (renderTo: string | HTMLElement, options: Options, callback: (chart: ChartObject) => void): ChartObject;
}

/**
 * The Element class is a JavaScript wrapper for SVG elements used in the rendering layer of Highchart. Combined with
 * the Renderer object, these elements allows freeform annotation in the charts or even in your HTML pages without
 * creating a chart at all.
 */
interface ElementObject {
    /**
     * Add the element to the renderer canvas.
     * @param  {ElementObject} parent The element can be added to a g (group) element.
     * @return {ElementObject}
     * @since 2.0
     */
    add(parent?: ElementObject): ElementObject;
    /**
     * Apply numeric attributes to the SVG/VML element by animation. See Element.attr() for more information on setting
     * attributes.
     * @param  {any} attributes A set of attributes to apply.
     * @param  {any} animation Optional animation parameters that are passed over to jQuery or other framework. Valid properties depend on the library, but options like duration, easing and complete are supported by jQuery.
     * @return {ElementObject}
     * @since 2.0
     */
    animate(attributes: any, animation?: any): ElementObject;
    /**
     * Apply attributes to the SVG/VML elements. These attributes for the most parts correspond to SVG, but some are
     * specific to Highcharts, like zIndex and rotation.
     *
     * In order to set the rotation center for rotation, set x and y to 0 and use translateX and translateY attributes
     * to position the element instead.
     *
     * Attributes frequently used in Highcharts are fill, stroke, stroke-width.
     * @param  {any} hash A set of attributes to apply.
     * @return {ElementObject}
     * @since 2.0
     */
    attr(hash: any): ElementObject;
    /**
     * Apply some CSS properties to the element
     * @param {Object} hash The object literal of CSS properties to apply. Properties should be hyphenated, not camelCased.
     * @return {ElementObject}
     * @since 2.0
     */
    css(hash: Object): ElementObject;
    /**
     * Destroy the element and free up memory
     * @since 2.0
     */
    destroy(): void;
    fadeOut(duration?: number): void;
    /**
     * Get the bounding box of the element
     * @return An object containing x, y, width and height values for the element.
     * @since 2.0
     */
    getBBox(): { x: number; y: number; height: number; width: number; };
    /**
     * Apply an event handler to the element
     * @param {string} eventType The event type to attach, for example 'click', 'mouseover', 'touch'.
     * @param handler The event handler function.
     * @return {ElementObject}
     * @since 2.0
     */
    on(eventType: string, handler: () => void): ElementObject;
    /**
     * Bring the element to the front. Alternatively, a zIndex attribute can be given.
     * @return {ElementObject} The element object
     * @since 2.0
     */
    toFront(): ElementObject;
}

/**
 * Allows direct access to the Highcharts rendering layer in order to draw primitive shapes like circles,
 * rectangles,paths or text directly on a chart, or independent from any chart. The Renderer represents a wrapper object
 * for SVGin modern browsers and VML in IE < 8.
 *
 * An existing chart's renderer can be accessed through chart.renderer. To create a renderer independent from a chart,
 * use var renderer = new Highcharts.Renderer(parentNode, width, height); where parentNode is the HTML element where you
 * want to add it.
 *
 * The Renderer's methods are chained wherever possible, so you can initiate an element then call for example attr and
 * css and add on that element in one statement.
 */
interface RendererObject {
    /**
     * Draw an arc on the renderer canvas.
     * @param  {number} centerX The x position of the arc's center in the SVG element.
     * @param  {number} centerY The y position of the arc's center in the SVG element.
     * @param  {number} outerRadius The outer radius of the arc.
     * @param  {number} innerRadius The inner radius of the arc.
     * @param  {number} start The starting angle of the arc in radians, where 0 is to the right and -Math.PI/2 is up.
     * @param  {number} end The ending angle of the arc in radians, where 0 is to the right and -Math.PI/2 is up.
     * @return {ElementObject}
     * @since 2.0
     */
    arc(centerX: number, centerY: number, outerRadius: number, innerRadius: number, start: number, end: number): ElementObject;
    /**
     * Draw circle on the renderer canvas.
     * @param  {number} centerX The x position of the circle's center in the SVG element.
     * @param  {number} centerY The y position of the circle's center in the SVG element.
     * @param  {number} radius  [description]
     * @return {ElementObject}
     * @since 2.0
     */
    circle(centerX: number, centerY: number, radius: number): ElementObject;
    /**
     * Add an SVG/VML group.
     * @param [string] name The name of the group. This will be used in the class name, which will be 'highcharts-'+ name. Other Element objects are added to the group by using the group as the first parameter in .add() for the wrappers
     * @return {ElementObject}
     * @since 2.0
     */
    g(name?: string): ElementObject;
    /**
     * Add an image from an external resource.
     * @param  {string} source The URL of the image.
     * @param  {number} x      The x position of the image's upper left corner.
     * @param  {number} y      The y position of the image's upper left corner.
     * @param  {number} width  The width of the image.
     * @param  {number} height The height of the image.
     * @return {ElementObject}
     * @since 2.0
     */
    image(source: string, x: number, y: number, width: number, height: number): ElementObject;
    /**
     * Draw a label, which is an extended text element with support for border and background. Highcharts creates a g
     * element with a text and a path or rect inside, to make it behave somewhat like a HTML div. Border and background
     * are set through stroke, stroke-width and fill attributes using the attr method. This must be done before calling
     * add.
     * @param  {string} str The text or HTML to draw
     * @param  {number} x The x position of the label's left side.
     * @param  {number} y The y position of the label's top side or baseline, depending on the baseline parameter.
     * @param  [string] shape The shape of the label's border/background, if any. Defaults to rect.
     * @param  [number] anchorX If the shape has a pointer, like the chevron on a callout shape, anchorX is the x position to point to.
     * @param  [number] anchorY If the shape has a pointer, like the chevron on a callout shape, anchorY is the y position to point to.
     * @param  [boolean] useHTML Use HTML to render the text of the label.
     * @param  [boolean] baseline Whether the label should be vertically aligned by the text baseline, which makes it behave like the text element, or by the top left side, which makes it behave like a HTML div.
     * @param  [string] className A class name for the g element surrounding the label.
     * @return {ElementObject}
     * @since 2.0
     */
    label(str: string, x: number, y: number, shape?: string, anchorX?: number, anchorY?: number, useHTML?: boolean, baseline?: boolean, className?: string): ElementObject;
    /**
     * Add a path based on SVG's path commands. In SVG capable browsers all path commands are supported, but in VML only
     * a subset is supported: absolute moveTo (M), absolute lineTo (L), absolute curveTo (C) and close (Z).
     * @param  {(string|number)[]} path An SVG path split up in array form.
     * @return {ElementObject}
     */
    path(path: [string | number]): ElementObject;
    /**
     * Add a rectangle.
     * @param  {number} x The x position of the rectangle's upper left corner.
     * @param  {number} y The y position of the rectangle's upper left corner.
     * @param  {number} width The width of the rectangle.
     * @param  {number} height The height of the rectangle.
     * @param  {number} cornerRadius The corner radius of all the rectangle's corners.
     * @return {ElementObject}
     * @since 2.0
     */
    rect(x: number, y: number, width: number, height: number, cornerRadius: number): ElementObject;
    /**
     * Draw text. The text can contain a subset of HTML, like spans and anchors and some basic text styling of these.
     * For more advanced features like border and background, use label instead.
     * @param  {string} str The text or HTML to draw
     * @param  {number} x The x position of the text's lower left corner.
     * @param  {number} y The y position of the text's lower left corner.
     * @return {ElementObject}
     * @since 2.0
     */
    text(str: string, x: number, y: number): ElementObject;
}

interface Renderer {
    new (parentNode: HTMLElement, width: number, height: number): RendererObject;
}

interface Static {
    Chart: Chart;
    Renderer: Renderer;
    Color(color: string | Gradient): string | Gradient;

    /**
     * As Highcharts.Chart, but without need for the new keyword.
     * @since 4.2.0
     */
    chart(options: Options, callback?: (chart: ChartObject) => void): ChartObject;
    /**
     * As Highcharts.Chart, but without need for the new keyword.
     * @since 4.2.0
     */
    chart(renderTo: string | HTMLElement, options: Options, callback?: (chart: ChartObject) => void): ChartObject;
    /**
     * An array containing the current chart objects in the page. A chart's position in the array is preserved
     * throughout the page's lifetime. When a chart is destroyed, the array item becomes undefined.
     * @since 2.3.4
     */
    charts: ChartObject[];
    /**
     * Formats a JavaScript date timestamp (milliseconds since Jan 1st 1970) into a human readable date string. The
     * format is a subset of the formats for PHP's strftime function. Additional formats can be given in the
     * Highcharts.dateFormats hook, see below.
     * @param  {string} format A string containing some of the formats.
     * @param  [number] time The JavaScript time to format.
     * @param  [boolean] capitalize Whether to capitalize words in the return string.
     * @return {string}
     */
    dateFormat(format: string, time?: number, capitalize?: boolean): string;
    /**
     * A hook for defining additional date format specifiers. New specifiers are defined as key-value pairs by using the
     * specifier as key, and a function which takes the timestamp as value. This function returns the formatted portion
     * of the date.
     */
    dateFormats: DateFormatSpecifiers;
    /**
     * Formats a JavaScript number with grouped thousands, a fixed amount of decimals and an optional decimal point. It
     * is a port of PHP's function with the same name. See PHP number_format for a full explanation of the parameters.
     * @param  {number} value        The raw number to format.
     * @param  {number} decimals     The desired number of decimals.
     * @param  {string} decimalPoint The decimal point. Defaults to '.' or to the string specified globally in options.lang.decimalPoint.
     * @param  {string} thousandsSep The thousands separator. Defaults to ' ' or to the string specified globally in options.lang.thousandsSep.
     * @return {string}
     */
    numberFormat(value: number, decimals?: number, decimalPoint?: string, thousandsSep?: string): string;
    /**
     * Sets the options globally for all charts created after this has been called. Takes an options JavaScript object
     * structure as the argument. These options are merged with the default options and the result is returned.
     * @param options The chart configuration object.
     * @return {Options}
     */
    setOptions(options: GlobalOptions): Options;
    /**
     * Get the updated default options. Until 3.0.7, merely exposing defaultOptions for outside modules
     * wasn't enough because the setOptions method created a new object.
     */
    getOptions(): Options;

    map(array: any[], fn: Function): any[];
}

/**
 * The Point object is the JavaScript representation of each data point
 *
 * The object can be accessed in a number of ways. In all point event handlers the point object is this. In the series
 * object all the points are accessed by the series.data array.
 *
 * Another way to reference the point programmatically is by id. Add an id in the point configuration options, and get
 * the point object by chart.get(id).
 */
interface PointObject {
    /**
     * For categorized axes this property holds the category name for the point. For other axis it holds the x value.
     * @since 1.2.0
     */
    category: string | number;
    name: string;
    index: number;
    /**
     * The percentage for points in a stacked series or pies.
     * @since 1.2.0
     */
    percentage: number;
    /**
     * Remove the point from the series.
     * @param [boolean] redraw Defaults to true. Whether to redraw the chart after the point is removed.If doing more operations on the chart, it is a good idea to set redraw to false and call chart.redraw() after.
     * @param [boolean|Animation] animation Defaults to true. When true, the graph's updating will be animated with default animation options. The animation can also be a configuration object with properties duration and easing.
     * @since 1.2.0
     */
    remove(redraw?: boolean, animation?: boolean | Animation): void;
    /**
     * Select or unselect the point.
     * @param [boolean] select When true, the point is selected. When false, the point is unselected. When null or undefined, the selection state is toggled.
     * @param [boolean] accumulate When true, the selection is added to other selected points. When false, other selected points are deselected. Internally in Highcharts,selected points are accumulated on Control, Shift or Cmd clicking the point.
     * @since 1.2.0
     */
    select(select?: boolean, accumulate?: boolean): void;
    /**
     * Whether the point is selected or not.
     * @since 1.2.0
     */
    selected: boolean;
    /**
     * The series object associated with the point.
     * @since 1.2.0
     */
    series: SeriesObject;
    /**
     * Slice out or set back in a pie chart slice. This is the default way of Highcharts to visualize that a pie point
     * is selected.
     * @param [boolean] sliced When true, the point is sliced out. When false, the point is set in. When null or undefined, the sliced state is toggled.
     * @param [boolean] redraw Defaults to true. Whether to redraw the chart after the point is altered.
     * @param [boolean|Animation] animation Defaults to true. When true, the move will be animated with default animation options. The animation can also be a configuration object with properties duration and easing.
     * @since 1.2.0
     */
    slice(sliced?: boolean, redraw?: boolean, animation?: boolean | Animation): void;
    /**
     * The total of a stack for stacked series, or pie in pie charts.
     */
    total: number;
    /**
     * Update the point with new values.
     * @param {number|[number,number]|DataPoint} options The point options. Point options are handled as described under the series<type>.data item for each series type. For example for a line series, if options is a single number, the point will be given that number as the main y value. If it is an array, it will be interpreted as x and y values respectively. If it is an object, advanced options are applied.
     * @param [boolean] redraw Defaults to true. Whether to redraw the chart after the point is updated.If doing more operations on the chart, it is a good idea to set redraw to false and call chart.redraw() after.
     * @param {boolean|Animation} animation Defaults to true. When true, the update will be animated with default animation options. The animation can also be a configuration object with properties duration and easing.
     * @since 1.2.0
     */
    update(options: number | [number, number] | DataPoint, redraw?: boolean, animation?: boolean | Animation): void;
    /**
     * The x value for the point.
     * @since 1.2.0
     */
    x: number;
    /**
     * The y value for the point.
     * @since 1.2.0
     */
    y: number;
}

/**
 * The Series object is the JavaScript representation of each line, area series, pie etc.
 *
 * The object can be accessed in a number of ways. All series and point event handlers give a reference to the series
 * object. The chart object has a series property that is a collection of all the chart's series. The point objects also
 * have the same reference.
 *
 * Another way to reference the series programmatically is by id. Add an id in the series configuration options, and get
 * the series object by chart.get(id).
 *
 * Configuration options for the series are given in three levels. Options for all series in a chart are given in the
 * plotOptions.series object. Then options for all series of a specific type are given in the plotOptions of that type,
 * for example plotOptions.line. Next, options for one single series are given in the series array.
 */
interface SeriesObject {
    /**
     * Add a point to the series after render time. The point can be added at the end, or by giving it an X value, to
     * the start or in the middle of the series.
     * @param {number|[number,number]|DataPoint} The point options. If options is a single number, a point with that y value is appended to the series.If it is an array, it will be interpreted as x and y values respectively. If it is an object, advanced options as outlined under series.data are applied.
     * @param [boolean=true] redraw - Whether to redraw the chart after the point is added. When adding more than one point, it is highly recommended that the redraw option be set to false, and instead chart.redraw() is explicitly called after the adding of points is finished.
     * @param [boolean=false] shift - When shift is true, one point is shifted off the start of the series as one is appended to the end. Use this option for live charts monitoring a value over time.
     * @param [(boolean|Animation)=false] animation - When shift is true, one point is shifted off the start of the series as one is appended to the end. Use this option for live charts monitoring a value over time.
     * @since 1.2.0
     */
    addPoint(options: number | [number, number] | DataPoint, redraw?: boolean, shift?: boolean, animation?: boolean | Animation): void;
    /**
     * Read only. The chart that the series belongs to.
     * @since 1.2.0
     */
    chart: ChartObject;
    /**
     * Read only. An array with the series' data point objects.
     * @since 1.2.0
     */
    data: PointObject[];
    /**
     * Hides the series if visible. If the chart.ignoreHiddenSeries option is true,the chart is redrawn without this
     * series.
     * @since 1.2.0
     */
    hide(): void;
    /**
     * The series' name as given in the options.
     * @since 1.2.0
     */
    name: string;
    /**
     * Read only. The series' options.
     * @since 1.2.0
     */
    options: IndividualSeriesOptions;
    /**
     * Remove the series from the chart.
     * @param [boolean=true] redraw - Whether to redraw the chart after the series is removed.If doing more operations on the chart, it is a good idea to set redraw to false and call chart.redraw() after.
     * @since 1.2.0
     */
    remove(redraw?: boolean): void;
    /**
     * Remove a point from the series. Unlike the Point.remove method, this can also be done on a point that is not
     * instanciated because it is outside the view or subject to data grouping.
     * @param {number} index - The index of the point in the data array.
     * @param [boolean=true] redraw - Whether to redraw the chart after the point is added. When adding more than one point, it is highly recommended that the redraw option be set to false, and instead chart.redraw() is explicitly called after the adding of points is finished.
     * @param [boolean|Animation=true] animation - When true, the graph will be animated with default animation options. The animation can also be a configuration object with properties duration and easing.
     * @since 4.1.0
     */
    removePoint(index: number, redraw?: boolean, animation?: boolean | Animation): void;
    /**
     * Select or unselect the series. This means its selected property is set,the checkbox in the legend is toggled and
     * when selected, the series is returned in the chart.getSelectedSeries() method.
     * @param [boolean] selected - When true, the series is selected. When false it is unselected. When null or undefined, the series' selection state is toggled.
     * @since 1.2.0
     */
    select(selected?: boolean): void;
    /**
     * Read only. The series' selected state as set by series.select().
     * @since 1.2.0
     */
    selected: boolean;
    /**
     * Apply a new set of data to the series and optionally redraw it. Note that this method throws away all points and
     * creates new ones. For updating the values of existing points, use Point.update() instead.
     * @param {number[]|number[][]|DataPoint[]} data - Takes an array of data in the same format as described under series<type>data for the given series type.
     * @param [boolean=true] redraw - Whether to redraw the chart after the series is altered.If doing more operations on the chart, it is a good idea to set redraw to false and call chart.redraw() after.
     * @param [boolean|Animation] animation - When the updated data is the same length as the existing data, points will be updated by default, and animation visualizes how the points are changed. Set false to disable animation, or a configuration object to set duration or easing.
     * @param [boolean] updatePoints - When the updated data is the same length as the existing data, points will be updated instead of replace. This option prevents this, and makes setData behave like it did prior to Highcharts 3.0.10.
     * @since 1.2.0
     */
    setData(data: number[] | number[][] | DataPoint[], redraw?: boolean, animation?: boolean | Animation, updatePoints?: boolean): void;
    /**
     * A utility function to show or hide the series with an optional redraw.
     * @param [boolean] visible - Whether to show or hide the series. If undefined, the visibility is toggled.
     * @param [boolean=true] redraw - Whether to redraw the chart after the series is altered.If doing more operations on the chart, it is a good idea to set redraw to false and call chart.redraw() after.
     * @since 1.2.0
     */
    setVisible(visible?: boolean, redraw?: boolean): void;
    /**
     * Shows the series if hidden.
     * @since 1.2.0
     */
    show(): void;
    /**
     * Read only. The series' type, like 'line', 'area' etc.
     * @since 1.2.0
     */
    type: string;
    /**
     * Update the series with a new set of options. For a clean and precise handling of new options, all methods and
     * elements from the series is removed, and it is initiated from scratch. Therefore, this method is more performance
     * expensive than some other utility methods like setData or setVisible.
     * @param {IndividualSeriesOptions} options New options that will be merged into the series' existing options.
     * @param [boolean] redraw - Whether to redraw the chart after the series is altered. If doing more operations on the chart, it is a good idea to set redraw to false and call chart.redraw() after.
     * @since 1.2.0
     */
    update(options: IndividualSeriesOptions, redraw?: boolean): void;
    /**
     * Read only. The series' visibility state as set by series.show(), series.hide(), or the initial configuration.
     * @since 1.2.0
     */
    visible: boolean;
    /**
     * Read only. The unique xAxis object associated with the series.
     * @since 1.2.0
     */
    xAxis: AxisObject;
    /**
     * Read only. The unique yAxis object associated with the series.
     * @since 1.2.0
     */
    yAxis: AxisObject;
}

}
declare module "highcharts" {
    export = __Highcharts;
}

interface JQuery {
    highcharts(): __Highcharts.ChartObject;
    /**
     * Creates a new Highcharts.Chart for the current JQuery selector; usually
     * a div selected by $('#container')
     * @param {Options} options Options for this chart
     * @return current {JQuery} selector the current JQuery selector
     **/
    highcharts(options: __Highcharts.Options): JQuery;
    /**
     * Creates a new Highcharts.Chart for the current JQuery selector; usually
     * a div selected by $('#container')
     * @param {Options} options Options for this chart
     * @param callback Callback function used to manipulate the constructed chart instance
     * @return current {JQuery} selector the current JQuery selector
     **/
    highcharts(options: __Highcharts.Options, callback: (chart: __Highcharts.ChartObject) => void): JQuery;
}