Check hardware support for LGT8F type arduino nano clone boards

[modulove]

Boards based on LGT8F, e.g LGT8F328P (purple pcb) have some advanced features which are not covered in the code yet.

• 1. LGT8F328P allows you to increase the ADC resolution to 11 or 12 bits:

void setup(){ analogReference(INTERNAL4V096); analogReadResolution(10); // Resolution = 10, 11 or 12 Bit }

• Accuracy of the DAC
• LGT8F328P has two 8-bit and two 16-bit timers, so one 16-bit timer more (Timer3) than the ATmega328P
• 80 mA outputs (pins TX, D2, D5 and D6 can supply up to 80 mA)
• Fastio – Functions (Similar to FastGPIO library, small, efficient)
• You can set the Timer0 and Timer1 counter to double the system frequency, i.e. up to 64 MHz!

We should think about if we want to use this or abandon the support entirely I think.

[modulove]

We do Set the amount of savestate slots, presets and Also if the bootlogo should Show depending on the microcontroller soon with futurebeat Update. This is a Start.

[modulove]

LGT8F328P is no longer supported. We had some issues with briked devices.