From 8583d55f9c33fece9e0a39824799234ad6375b9d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20L=C3=B6nnhager?= Date: Mon, 10 Jun 2024 17:27:39 +0200 Subject: [PATCH 1/3] Add integration tests for WG over Shadowsocks --- test/test-manager/src/tests/tunnel.rs | 95 ++++++++++++++++++++++++++- 1 file changed, 93 insertions(+), 2 deletions(-) diff --git a/test/test-manager/src/tests/tunnel.rs b/test/test-manager/src/tests/tunnel.rs index c671f28966c0..f8ba47d1ca87 100644 --- a/test/test-manager/src/tests/tunnel.rs +++ b/test/test-manager/src/tests/tunnel.rs @@ -17,8 +17,8 @@ use mullvad_types::{ constraints::Constraint, relay_constraints::{ self, BridgeConstraints, BridgeSettings, BridgeType, OpenVpnConstraints, RelayConstraints, - RelaySettings, SelectedObfuscation, TransportPort, Udp2TcpObfuscationSettings, - WireguardConstraints, + RelaySettings, SelectedObfuscation, ShadowsocksSettings, TransportPort, + Udp2TcpObfuscationSettings, WireguardConstraints, }, states::TunnelState, wireguard, @@ -203,6 +203,49 @@ pub async fn test_udp2tcp_tunnel( Ok(()) } +/// Use Shadowsocks obfuscation. This tests whether the daemon can establish a Shadowsocks tunnel. +/// Note that this doesn't verify that Shadowsocks is in fact being used. +#[test_function] +pub async fn test_wireguard_over_shadowsocks( + _: TestContext, + rpc: ServiceClient, + mut mullvad_client: MullvadProxyClient, +) -> anyhow::Result<()> { + mullvad_client + .set_obfuscation_settings(relay_constraints::ObfuscationSettings { + selected_obfuscation: SelectedObfuscation::Shadowsocks, + shadowsocks: ShadowsocksSettings { + port: Constraint::Any, + }, + ..Default::default() + }) + .await + .context("Failed to enable shadowsocks")?; + + let relay_settings = RelaySettings::Normal(RelayConstraints { + tunnel_protocol: Constraint::Only(TunnelType::Wireguard), + ..Default::default() + }); + + set_relay_settings(&mut mullvad_client, relay_settings) + .await + .context("Failed to update relay settings")?; + + log::info!("Connect to WireGuard via shadowsocks endpoint"); + + connect_and_wait(&mut mullvad_client).await?; + + // Verify that we have a Mullvad exit IP + // + + assert!( + helpers::using_mullvad_exit(&rpc).await, + "expected Mullvad exit IP" + ); + + Ok(()) +} + /// Test whether bridge mode works. This fails if: /// * No outgoing traffic to the bridge/entry relay is observed from the SUT. /// * The conncheck reports an unexpected exit relay. @@ -604,6 +647,54 @@ pub async fn test_quantum_resistant_multihop_udp2tcp_tunnel( Ok(()) } +/// Test Shadowsocks, PQ, and WireGuard combined. +/// +/// # Limitations +/// +/// This is not testing any of the individual components, just whether the daemon can connect when +/// all of these features are combined. +#[test_function] +pub async fn test_quantum_resistant_multihop_shadowsocks_tunnel( + _: TestContext, + rpc: ServiceClient, + mut mullvad_client: MullvadProxyClient, +) -> anyhow::Result<()> { + mullvad_client + .set_quantum_resistant_tunnel(wireguard::QuantumResistantState::On) + .await + .context("Failed to enable PQ tunnels")?; + + mullvad_client + .set_obfuscation_settings(relay_constraints::ObfuscationSettings { + selected_obfuscation: SelectedObfuscation::Shadowsocks, + shadowsocks: ShadowsocksSettings { + port: Constraint::Any, + }, + ..Default::default() + }) + .await + .context("Failed to enable obfuscation")?; + + let relay_constraints = RelayQueryBuilder::new() + .wireguard() + .multihop() + .into_constraint(); + + mullvad_client + .set_relay_settings(RelaySettings::Normal(relay_constraints)) + .await + .context("Failed to update relay settings")?; + + connect_and_wait(&mut mullvad_client).await?; + + assert!( + helpers::using_mullvad_exit(&rpc).await, + "Expected Mullvad exit IP" + ); + + Ok(()) +} + /// Try to connect to an OpenVPN relay via a remote, passwordless SOCKS5 server. /// * No outgoing traffic to the bridge/entry relay is observed from the SUT. /// * The conncheck reports an unexpected exit relay. From 8a837bafef777546387b2eb2b81e59b38e60e3d8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20L=C3=B6nnhager?= Date: Tue, 30 Jul 2024 10:52:54 +0200 Subject: [PATCH 2/3] Replace footgunny From implementations for RelayQuery --- .../src/relay_selector/mod.rs | 10 +- .../src/relay_selector/query.rs | 182 +++++++++++------- .../tests/relay_selector.rs | 7 +- mullvad-types/src/constraints/constraint.rs | 9 + test/test-manager/src/tests/helpers.rs | 45 +++-- test/test-manager/src/tests/tunnel.rs | 121 ++---------- 6 files changed, 179 insertions(+), 195 deletions(-) diff --git a/mullvad-relay-selector/src/relay_selector/mod.rs b/mullvad-relay-selector/src/relay_selector/mod.rs index d7efa89b5f39..dc495b05aa1b 100644 --- a/mullvad-relay-selector/src/relay_selector/mod.rs +++ b/mullvad-relay-selector/src/relay_selector/mod.rs @@ -369,14 +369,14 @@ impl<'a> TryFrom> for RelayQuery { bridge_settings: match bridge_state { BridgeState::On => match bridge_settings.bridge_type { mullvad_types::relay_constraints::BridgeType::Normal => { - Constraint::Only(BridgeQuery::Normal(bridge_settings.normal.clone())) + BridgeQuery::Normal(bridge_settings.normal.clone()) } mullvad_types::relay_constraints::BridgeType::Custom => { - Constraint::Only(BridgeQuery::Custom(bridge_settings.custom.clone())) + BridgeQuery::Custom(bridge_settings.custom.clone()) } }, - BridgeState::Auto => Constraint::Only(BridgeQuery::Auto), - BridgeState::Off => Constraint::Only(BridgeQuery::Off), + BridgeState::Auto => BridgeQuery::Auto, + BridgeState::Off => BridgeQuery::Off, }, } } @@ -930,7 +930,7 @@ impl RelaySelector { if !BridgeQuery::should_use_bridge(&query.openvpn_constraints().bridge_settings) { Ok(None) } else { - let bridge_query = &query.openvpn_constraints().bridge_settings.clone().unwrap(); + let bridge_query = &query.openvpn_constraints().bridge_settings; let custom_lists = &custom_lists; match protocol { TransportProtocol::Udp => { diff --git a/mullvad-relay-selector/src/relay_selector/query.rs b/mullvad-relay-selector/src/relay_selector/query.rs index 08e75d782a92..67fe43e2a354 100644 --- a/mullvad-relay-selector/src/relay_selector/query.rs +++ b/mullvad-relay-selector/src/relay_selector/query.rs @@ -32,9 +32,10 @@ use crate::{AdditionalWireguardConstraints, Error}; use mullvad_types::{ constraints::Constraint, relay_constraints::{ - BridgeConstraints, LocationConstraint, ObfuscationSettings, OpenVpnConstraints, Ownership, - Providers, RelayConstraints, RelaySettings, SelectedObfuscation, ShadowsocksSettings, - TransportPort, Udp2TcpObfuscationSettings, WireguardConstraints, + BridgeConstraints, BridgeSettings, BridgeState, BridgeType, LocationConstraint, + ObfuscationSettings, OpenVpnConstraints, Ownership, Providers, RelayConstraints, + SelectedObfuscation, ShadowsocksSettings, TransportPort, Udp2TcpObfuscationSettings, + WireguardConstraints, }, wireguard::QuantumResistantState, Intersection, @@ -179,6 +180,42 @@ impl RelayQuery { Ok(()) } + + /// The mapping from [`RelayQuery`] to all underlying settings types. + /// + /// Useful in contexts where you cannot use the query directly but + /// still want use of the builder for convenience. For example in + /// end to end tests where you must use the management interface + /// to apply settings to the daemon. + pub fn into_settings( + self, + ) -> ( + RelayConstraints, + BridgeState, + BridgeSettings, + ObfuscationSettings, + ) { + let (bridge_state, bridge_settings) = self + .openvpn_constraints + .bridge_settings + .clone() + .into_settings(); + let obfuscation = self + .wireguard_constraints + .obfuscation + .clone() + .into_settings(); + let constraints = RelayConstraints { + location: self.location, + providers: self.providers, + ownership: self.ownership, + tunnel_protocol: self.tunnel_protocol, + wireguard_constraints: self.wireguard_constraints.into_constraints(), + openvpn_constraints: self.openvpn_constraints.into_constraints(), + }; + + (constraints, bridge_state, bridge_settings, obfuscation) + } } impl Default for RelayQuery { @@ -207,26 +244,6 @@ impl Default for RelayQuery { } } -impl From for RelayConstraints { - /// The mapping from [`RelayQuery`] to [`RelayConstraints`]. - fn from(value: RelayQuery) -> Self { - RelayConstraints { - location: value.location, - providers: value.providers, - ownership: value.ownership, - tunnel_protocol: value.tunnel_protocol, - wireguard_constraints: WireguardConstraints::from(value.wireguard_constraints), - openvpn_constraints: OpenVpnConstraints::from(value.openvpn_constraints), - } - } -} - -impl From for RelaySettings { - fn from(value: RelayQuery) -> Self { - RelayConstraints::from(value).into() - } -} - /// A query for a relay with Wireguard-specific properties, such as `multihop` and [wireguard /// obfuscation][`SelectedObfuscation`]. /// @@ -256,6 +273,31 @@ pub enum ObfuscationQuery { Shadowsocks(ShadowsocksSettings), } +impl ObfuscationQuery { + fn into_settings(self) -> ObfuscationSettings { + match self { + ObfuscationQuery::Auto => ObfuscationSettings { + selected_obfuscation: SelectedObfuscation::Auto, + ..Default::default() + }, + ObfuscationQuery::Off => ObfuscationSettings { + selected_obfuscation: SelectedObfuscation::Off, + ..Default::default() + }, + ObfuscationQuery::Udp2tcp(settings) => ObfuscationSettings { + selected_obfuscation: SelectedObfuscation::Udp2Tcp, + udp2tcp: settings, + ..Default::default() + }, + ObfuscationQuery::Shadowsocks(settings) => ObfuscationSettings { + selected_obfuscation: SelectedObfuscation::Shadowsocks, + shadowsocks: settings, + ..Default::default() + }, + } + } +} + impl From for ObfuscationQuery { /// A query for obfuscation settings. /// @@ -307,6 +349,16 @@ impl WireguardRelayQuery { quantum_resistant: QuantumResistantState::Auto, } } + + /// The mapping from [`WireguardRelayQuery`] to [`WireguardConstraints`]. + fn into_constraints(self) -> WireguardConstraints { + WireguardConstraints { + port: self.port, + ip_version: self.ip_version, + entry_location: self.entry_location, + use_multihop: self.use_multihop.unwrap_or(false), + } + } } impl Default for WireguardRelayQuery { @@ -315,18 +367,6 @@ impl Default for WireguardRelayQuery { } } -impl From for WireguardConstraints { - /// The mapping from [`WireguardRelayQuery`] to [`WireguardConstraints`]. - fn from(value: WireguardRelayQuery) -> Self { - WireguardConstraints { - port: value.port, - ip_version: value.ip_version, - entry_location: value.entry_location, - use_multihop: value.use_multihop.unwrap_or(false), - } - } -} - impl From for AdditionalWireguardConstraints { /// The mapping from [`WireguardRelayQuery`] to [`AdditionalWireguardConstraints`]. fn from(value: WireguardRelayQuery) -> Self { @@ -348,16 +388,21 @@ impl From for AdditionalWireguardConstraints { #[derive(Debug, Clone, Eq, PartialEq, Intersection)] pub struct OpenVpnRelayQuery { pub port: Constraint, - pub bridge_settings: Constraint, + pub bridge_settings: BridgeQuery, } impl OpenVpnRelayQuery { pub const fn new() -> OpenVpnRelayQuery { OpenVpnRelayQuery { port: Constraint::Any, - bridge_settings: Constraint::Any, + bridge_settings: BridgeQuery::Auto, } } + + /// The mapping from [`OpenVpnRelayQuery`] to [`OpenVpnConstraints`]. + fn into_constraints(self) -> OpenVpnConstraints { + OpenVpnConstraints { port: self.port } + } } impl Default for OpenVpnRelayQuery { @@ -371,7 +416,7 @@ impl Default for OpenVpnRelayQuery { /// /// [`BridgeState`]: mullvad_types::relay_constraints::BridgeState /// [`BridgeSettings`]: mullvad_types::relay_constraints::BridgeSettings -#[derive(Debug, Clone, Eq, PartialEq)] +#[derive(Debug, Default, Clone, Eq, PartialEq)] pub enum BridgeQuery { /// Bridges should not be used. Off, @@ -379,6 +424,7 @@ pub enum BridgeQuery { /// /// If this variant is intersected with another [`BridgeQuery`] `bq`, /// `bq` is always preferred. + #[default] Auto, /// Bridges should be used. Normal(BridgeConstraints), @@ -387,22 +433,38 @@ pub enum BridgeQuery { } impl BridgeQuery { - /// If `bridge_constraints` is `Any`, bridges should not be used due to - /// latency concerns. - /// - /// If `bridge_constraints` is `Only(settings)`, then `settings` will be - /// used to decide if bridges should be used. See [`BridgeQuery`] for more - /// details, but the algorithm beaks down to this: + /// `settings` will be used to decide if bridges should be used. See [`BridgeQuery`] + /// for more details, but the algorithm beaks down to this: /// /// * `BridgeQuery::Off`: bridges will not be used /// * otherwise: bridges should be used - pub const fn should_use_bridge(bridge_constraints: &Constraint) -> bool { - match bridge_constraints { - Constraint::Only(settings) => match settings { - BridgeQuery::Normal(_) | BridgeQuery::Custom(_) => true, - BridgeQuery::Off | BridgeQuery::Auto => false, - }, - Constraint::Any => false, + pub const fn should_use_bridge(settings: &BridgeQuery) -> bool { + match settings { + BridgeQuery::Normal(_) | BridgeQuery::Custom(_) => true, + BridgeQuery::Off | BridgeQuery::Auto => false, + } + } + + fn into_settings(self) -> (BridgeState, BridgeSettings) { + match self { + BridgeQuery::Off => (BridgeState::Off, Default::default()), + BridgeQuery::Auto => (BridgeState::Auto, Default::default()), + BridgeQuery::Normal(constraints) => ( + BridgeState::On, + BridgeSettings { + bridge_type: BridgeType::Normal, + normal: constraints, + custom: None, + }, + ), + BridgeQuery::Custom(custom) => ( + BridgeState::On, + BridgeSettings { + bridge_type: BridgeType::Normal, + normal: Default::default(), + custom, + }, + ), } } } @@ -425,13 +487,6 @@ impl Intersection for BridgeQuery { } } -impl From for OpenVpnConstraints { - /// The mapping from [`OpenVpnRelayQuery`] to [`OpenVpnConstraints`]. - fn from(value: OpenVpnRelayQuery) -> Self { - OpenVpnConstraints { port: value.port } - } -} - #[allow(unused)] pub mod builder { //! Strongly typed Builder pattern for of relay constraints though the use of the Typestate @@ -498,10 +553,6 @@ pub mod builder { debug_assert!(self.query.validate().is_ok()); self.query } - - pub fn into_constraint(self) -> RelayConstraints { - RelayConstraints::from(self.build()) - } } impl RelayQueryBuilder { @@ -802,8 +853,7 @@ pub mod builder { bridge_settings: bridge_settings.clone(), }; - self.query.openvpn_constraints.bridge_settings = - Constraint::Only(BridgeQuery::Normal(bridge_settings)); + self.query.openvpn_constraints.bridge_settings = BridgeQuery::Normal(bridge_settings); let builder = RelayQueryBuilder { query: self.query, @@ -820,14 +870,14 @@ pub mod builder { self.protocol.bridge_settings.location = Constraint::Only(LocationConstraint::from(location)); self.query.openvpn_constraints.bridge_settings = - Constraint::Only(BridgeQuery::Normal(self.protocol.bridge_settings.clone())); + BridgeQuery::Normal(self.protocol.bridge_settings.clone()); self } /// Constrain the [`Providers`] of the selected bridge. pub fn bridge_providers(mut self, providers: Providers) -> Self { self.protocol.bridge_settings.providers = Constraint::Only(providers); self.query.openvpn_constraints.bridge_settings = - Constraint::Only(BridgeQuery::Normal(self.protocol.bridge_settings.clone())); + BridgeQuery::Normal(self.protocol.bridge_settings.clone()); self } /// Constrain the [`Ownership`] of the selected bridge. diff --git a/mullvad-relay-selector/tests/relay_selector.rs b/mullvad-relay-selector/tests/relay_selector.rs index 51a395f6d5f8..bdfd8e19d0ed 100644 --- a/mullvad-relay-selector/tests/relay_selector.rs +++ b/mullvad-relay-selector/tests/relay_selector.rs @@ -1292,7 +1292,7 @@ fn openvpn_handle_bridge_settings() { // should fail. query .set_openvpn_constraints(OpenVpnRelayQuery { - bridge_settings: Constraint::Only(BridgeQuery::Normal(BridgeConstraints::default())), + bridge_settings: BridgeQuery::Normal(BridgeConstraints::default()), ..query.openvpn_constraints().clone() }) .unwrap(); @@ -1524,9 +1524,10 @@ fn valid_user_setting_should_yield_relay() { // Make a valid user relay constraint let location = GeographicLocationConstraint::hostname("se", "got", "se9-wireguard"); let user_query = RelayQueryBuilder::new().location(location.clone()).build(); - let user_constraints = RelayQueryBuilder::new() + let (user_constraints, ..) = RelayQueryBuilder::new() .location(location.clone()) - .into_constraint(); + .build() + .into_settings(); let config = SelectorConfig { relay_settings: user_constraints.into(), diff --git a/mullvad-types/src/constraints/constraint.rs b/mullvad-types/src/constraints/constraint.rs index 35b83e13202f..2fb2f163c2fe 100644 --- a/mullvad-types/src/constraints/constraint.rs +++ b/mullvad-types/src/constraints/constraint.rs @@ -41,6 +41,15 @@ impl fmt::Display for Constraint { } } +impl Constraint { + pub fn unwrap_or_default(self) -> T { + match self { + Constraint::Any => Default::default(), + Constraint::Only(value) => value, + } + } +} + impl Constraint { pub fn unwrap(self) -> T { match self { diff --git a/test/test-manager/src/tests/helpers.rs b/test/test-manager/src/tests/helpers.rs index 542cf0c8a492..6c51b1f18599 100644 --- a/test/test-manager/src/tests/helpers.rs +++ b/test/test-manager/src/tests/helpers.rs @@ -19,8 +19,7 @@ use mullvad_types::{ constraints::Constraint, location::Location, relay_constraints::{ - BridgeSettings, GeographicLocationConstraint, LocationConstraint, OpenVpnConstraints, - RelayConstraints, RelaySettings, WireguardConstraints, + GeographicLocationConstraint, LocationConstraint, RelayConstraints, RelaySettings, }, relay_list::Relay, states::TunnelState, @@ -589,24 +588,38 @@ impl Drop for AbortOnDrop { } } -pub async fn set_relay_settings( +pub async fn apply_settings_from_relay_query( mullvad_client: &mut MullvadProxyClient, - relay_settings: impl Into, + query: RelayQuery, ) -> Result<(), Error> { + let (constraints, bridge_state, bridge_settings, obfuscation) = query.into_settings(); + mullvad_client - .set_relay_settings(relay_settings.into()) + .set_relay_settings(constraints.into()) .await - .map_err(|error| Error::Daemon(format!("Failed to set relay settings: {}", error))) + .map_err(|error| Error::Daemon(format!("Failed to set relay settings: {}", error)))?; + mullvad_client + .set_bridge_state(bridge_state) + .await + .map_err(|error| Error::Daemon(format!("Failed to set bridge state: {}", error)))?; + mullvad_client + .set_bridge_settings(bridge_settings) + .await + .map_err(|error| Error::Daemon(format!("Failed to set bridge settings: {}", error)))?; + mullvad_client + .set_obfuscation_settings(obfuscation) + .await + .map_err(|error| Error::Daemon(format!("Failed to set obfuscation settings: {}", error))) } -pub async fn set_bridge_settings( +pub async fn set_relay_settings( mullvad_client: &mut MullvadProxyClient, - bridge_settings: BridgeSettings, + relay_settings: impl Into, ) -> Result<(), Error> { mullvad_client - .set_bridge_settings(bridge_settings) + .set_relay_settings(relay_settings.into()) .await - .map_err(|error| Error::Daemon(format!("Failed to set bridge settings: {}", error))) + .map_err(|error| Error::Daemon(format!("Failed to set relay settings: {}", error))) } /// Wait for the relay list to be updated, to make sure we have the overridden one. @@ -698,16 +711,8 @@ pub async fn constrain_to_relay( } | GetRelay::OpenVpn { exit, .. } => { let location = into_constraint(&exit)?; - let relay_constraints = RelayConstraints { - location, - wireguard_constraints: WireguardConstraints::from( - query.wireguard_constraints().clone(), - ), - openvpn_constraints: OpenVpnConstraints::from( - query.openvpn_constraints().clone(), - ), - ..Default::default() - }; + let (mut relay_constraints, ..) = query.into_settings(); + relay_constraints.location = location; Ok((exit, relay_constraints)) } unsupported => bail!("Can not constrain to a {unsupported:?}"), diff --git a/test/test-manager/src/tests/tunnel.rs b/test/test-manager/src/tests/tunnel.rs index f8ba47d1ca87..575339c5a815 100644 --- a/test/test-manager/src/tests/tunnel.rs +++ b/test/test-manager/src/tests/tunnel.rs @@ -1,7 +1,8 @@ use super::{ config::TEST_CONFIG, helpers::{ - self, connect_and_wait, disconnect_and_wait, set_bridge_settings, set_relay_settings, + self, apply_settings_from_relay_query, connect_and_wait, disconnect_and_wait, + set_relay_settings, }, Error, TestContext, }; @@ -17,8 +18,7 @@ use mullvad_types::{ constraints::Constraint, relay_constraints::{ self, BridgeConstraints, BridgeSettings, BridgeType, OpenVpnConstraints, RelayConstraints, - RelaySettings, SelectedObfuscation, ShadowsocksSettings, TransportPort, - Udp2TcpObfuscationSettings, WireguardConstraints, + RelaySettings, TransportPort, WireguardConstraints, }, states::TunnelState, wireguard, @@ -145,25 +145,9 @@ pub async fn test_udp2tcp_tunnel( rpc: ServiceClient, mut mullvad_client: MullvadProxyClient, ) -> Result<(), Error> { - mullvad_client - .set_obfuscation_settings(relay_constraints::ObfuscationSettings { - selected_obfuscation: SelectedObfuscation::Udp2Tcp, - udp2tcp: Udp2TcpObfuscationSettings { - port: Constraint::Any, - }, - ..Default::default() - }) - .await - .expect("failed to enable udp2tcp"); - - let relay_settings = RelaySettings::Normal(RelayConstraints { - tunnel_protocol: Constraint::Only(TunnelType::Wireguard), - ..Default::default() - }); + let query = RelayQueryBuilder::new().wireguard().udp2tcp().build(); - set_relay_settings(&mut mullvad_client, relay_settings) - .await - .expect("failed to update relay settings"); + apply_settings_from_relay_query(&mut mullvad_client, query).await?; log::info!("Connect to WireGuard via tcp2udp endpoint"); @@ -211,25 +195,9 @@ pub async fn test_wireguard_over_shadowsocks( rpc: ServiceClient, mut mullvad_client: MullvadProxyClient, ) -> anyhow::Result<()> { - mullvad_client - .set_obfuscation_settings(relay_constraints::ObfuscationSettings { - selected_obfuscation: SelectedObfuscation::Shadowsocks, - shadowsocks: ShadowsocksSettings { - port: Constraint::Any, - }, - ..Default::default() - }) - .await - .context("Failed to enable shadowsocks")?; + let query = RelayQueryBuilder::new().wireguard().shadowsocks().build(); - let relay_settings = RelaySettings::Normal(RelayConstraints { - tunnel_protocol: Constraint::Only(TunnelType::Wireguard), - ..Default::default() - }); - - set_relay_settings(&mut mullvad_client, relay_settings) - .await - .context("Failed to update relay settings")?; + apply_settings_from_relay_query(&mut mullvad_client, query).await?; log::info!("Connect to WireGuard via shadowsocks endpoint"); @@ -259,24 +227,9 @@ pub async fn test_bridge( // log::info!("Updating bridge settings"); - mullvad_client - .set_bridge_state(relay_constraints::BridgeState::On) - .await - .expect("failed to enable bridge mode"); + let query = RelayQueryBuilder::new().openvpn().bridge().build(); - set_bridge_settings(&mut mullvad_client, BridgeSettings::default()) - .await - .expect("failed to update bridge settings"); - - set_relay_settings( - &mut mullvad_client, - RelaySettings::Normal(RelayConstraints { - tunnel_protocol: Constraint::Only(TunnelType::OpenVpn), - ..Default::default() - }), - ) - .await - .expect("failed to update relay settings"); + apply_settings_from_relay_query(&mut mullvad_client, query).await?; // Connect to VPN // @@ -341,17 +294,9 @@ pub async fn test_multihop( rpc: ServiceClient, mut mullvad_client: MullvadProxyClient, ) -> Result<(), Error> { - let relay_constraints = RelayQueryBuilder::new() - .wireguard() - .multihop() - .into_constraint(); + let query = RelayQueryBuilder::new().wireguard().multihop().build(); - set_relay_settings( - &mut mullvad_client, - RelaySettings::Normal(relay_constraints), - ) - .await - .expect("failed to update relay settings"); + apply_settings_from_relay_query(&mut mullvad_client, query).await?; // Connect // @@ -458,7 +403,7 @@ pub async fn test_daita( ) -> anyhow::Result<()> { log::info!("Connecting to relay with DAITA"); - set_relay_settings( + apply_settings_from_relay_query( &mut mullvad_client, RelayQueryBuilder::new().wireguard().build(), ) @@ -616,26 +561,13 @@ pub async fn test_quantum_resistant_multihop_udp2tcp_tunnel( .await .expect("Failed to enable PQ tunnels"); - mullvad_client - .set_obfuscation_settings(relay_constraints::ObfuscationSettings { - selected_obfuscation: SelectedObfuscation::Udp2Tcp, - udp2tcp: Udp2TcpObfuscationSettings { - port: Constraint::Any, - }, - ..Default::default() - }) - .await - .expect("Failed to enable obfuscation"); - - let relay_constraints = RelayQueryBuilder::new() + let query = RelayQueryBuilder::new() .wireguard() .multihop() - .into_constraint(); + .udp2tcp() + .build(); - mullvad_client - .set_relay_settings(RelaySettings::Normal(relay_constraints)) - .await - .expect("Failed to update relay settings"); + apply_settings_from_relay_query(&mut mullvad_client, query).await?; connect_and_wait(&mut mullvad_client).await?; @@ -664,26 +596,13 @@ pub async fn test_quantum_resistant_multihop_shadowsocks_tunnel( .await .context("Failed to enable PQ tunnels")?; - mullvad_client - .set_obfuscation_settings(relay_constraints::ObfuscationSettings { - selected_obfuscation: SelectedObfuscation::Shadowsocks, - shadowsocks: ShadowsocksSettings { - port: Constraint::Any, - }, - ..Default::default() - }) - .await - .context("Failed to enable obfuscation")?; - - let relay_constraints = RelayQueryBuilder::new() + let query = RelayQueryBuilder::new() .wireguard() .multihop() - .into_constraint(); + .shadowsocks() + .build(); - mullvad_client - .set_relay_settings(RelaySettings::Normal(relay_constraints)) - .await - .context("Failed to update relay settings")?; + apply_settings_from_relay_query(&mut mullvad_client, query).await?; connect_and_wait(&mut mullvad_client).await?; From 338d082e03d2b12f28aec3f71ea13e387090ec09 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?David=20L=C3=B6nnhager?= Date: Mon, 26 Aug 2024 16:35:24 +0200 Subject: [PATCH 3/3] Fix panic caused by join handle being awaited twice --- tunnel-obfuscation/src/shadowsocks.rs | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/tunnel-obfuscation/src/shadowsocks.rs b/tunnel-obfuscation/src/shadowsocks.rs index eb56a3a63cf9..f40ee9d92ae8 100644 --- a/tunnel-obfuscation/src/shadowsocks.rs +++ b/tunnel-obfuscation/src/shadowsocks.rs @@ -115,9 +115,7 @@ async fn run_obfuscation( } client.abort(); - let _ = client.await; server.abort(); - let _ = server.await; Ok(()) } @@ -228,10 +226,11 @@ impl Obfuscator for Shadowsocks { } async fn run(self: Box) -> crate::Result<()> { - self.server - .await - .expect("server handle panicked") - .map_err(crate::Error::RunShadowsocksObfuscator) + match self.server.await { + Ok(result) => result.map_err(crate::Error::RunShadowsocksObfuscator), + Err(_err) if _err.is_cancelled() => Ok(()), + Err(_err) => panic!("server handle panicked"), + } } #[cfg(target_os = "android")]