Passive self-watering 3D-printable floating vegetable pot, inspired by the chinampa (floating garden bed).
The models have been successfully printed in Natural PLA on a Prusa Mk3S+ using a 0.4mm nozzle with an upgraded part cooling duct (See https://www.printables.com/model/906613-highv-part-cooling-duct-for-prusa-i3-mk3s)
The models have been successfully printed using the following profile with "vase mode" enabled. Note that the profile is for a 0.8 mm nozzle, but have been physically tested on a 0.4 mm nozzle.
Nozzle diameter: 0.8 mm nozzle
Layer height: 0.3 mm
Top fill pattern: Concentric
Bottom fill pattern: Concentric
First layer speed: 10 mm/s
Max print speed: 30 mm/s
Overhang speed:
0% overlap(bridge): 15 mm/s
25% overlap: 1 mm/s
50% overlap: 1 mm/s
75% overlap: 2 mm/s
Extrusion multiplier: 1.25
Nozzle temperature:
First layer: 230 C
Other layers: 230 C
Bed temperature:
First layer: 60 C
Other layers: 60 C
Fan speed:
Min: 100%
Max: 100%
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License
