Skip to content

Latest commit

 

History

History
13 lines (10 loc) · 618 Bytes

README.md

File metadata and controls

13 lines (10 loc) · 618 Bytes

Example Usage

The tx_example and recv_example require no setup. To see them working, connect the board to another networked device. For the tx_example, you will see an ICMP response packet addressed to broadcast.

Tap_example setup

The tap_example requires a small amount of setup:

  • Setup Tap Interface: sudo ip tuntap add mode tap
  • Configure Tap Interface: sudo ifconfig tap0 192.168.10.123
  • Ensure that there are no other interfaces active on the same subnet.
  • Run tap_test: ./tap_example tap0 -tap

At this point you can send traffic to other devices on the network using the tap interface.