This project is developed with the readme-driven development method. This file contains the vision, whereas the README reflects the functionality that is actually implemented.
Dropcaster is a podcast feed generator for the command line. It works with any (static file) web hoster.
Author: Nicolas E. Rabenau [email protected]
You have a number of podcast episodes that you would like to publish as a feed. Nothing else - no fancy website, no stats, nothing but the pure podcast.
With Dropcaster, you simply put the mp3 files into the public_html
folder of your web host. Then run dropcaster
- it generates the feed and writes it to a file, e.g. index.rss
. You can then take the RSS file's URL and publish it as the feed URL.
The feed URL can be consumed by any podcatcher, e.g. iTunes or Juice.
$ gem install dropcaster
$ dropcaster --help
Once installed, you can use the dropcaster
command to generate a new podcast feed document.
libxml-ruby
is a frequent offender with installation problems. As usual, Stack Overflow has the answer (at least for macOS with Homebrew):
$ gem install --no-document libxml-ruby -- --with-xml2-config="$(brew --prefix libxml2)/bin/xml2-config"
If you prefer Docker over a local installation, use
$ docker run -it --rm nerab/dropcaster dropcaster --help
The container will need access to the mp3 files on your workstation with a bind mount. For instance, running dropcaster
with the test fixtures will look like this:
$ docker \
run \
-it \
--rm \
--mount type=bind,source="$(pwd)"/test/fixtures,target=/public_html \
nerab/dropcaster
Replace "$(pwd)"/test/fixtures
with your own folder of mp3s, and you can run the command above without even installing Ruby.
Once Dropcaster is installed, the only two other things you will need are a channel definition and one or more mp3 files to publish.
Let's start with the channel definition. It is a simple YAML file that holds the general information about your podcast channel. According to the RSS 2.0 spec, the only mandatory information that your channel absolutely needs are a title, a description and a link to a web site where the channel belongs to.
The simplest channel file looks like this:
:title: 'All About Everything'
:description: 'A show about everything'
:url: 'http://www.example.com/podcasts/everything/index.html'
Store this file as channel.yml in the same directory where the mp3 files of your podcast reside. The channel definition is expected to be present in the same directory as your mp3 files, but this can be overridden using a command line switch. You can find a more elaborate example for the channel definition in the doc folder of the Dropcaster gem. You can find it by running gem open dropcaster
.
Now that we have the podcast channel defined, we need at least one episode (an audio file) in it. From Dropcaster's perspective, it does not matter how the episode was produced, but the critical information is the meta data in the mp3 file, because that is the authoritative source for the episode information. Almost all audio editors can write metadata, usually called ID3 tags. Dropcaster reads these tags from the mp3 files and fills the item element in the feed (that's how an episode is defined, technically) from it.
With all required pieces in place, we could generate the podcast feed. Just before we do that, we will inspect the feed by running the following commands:
$ cd ~/public_html
$ dropcaster
(The above lines assume that public_html
is the web server's document root, and that there is at least one mp3 file in public_html
).
Dropcaster will print the feed to standard-out, without writing it to disk. When you are happy with the results, call Dropcaster again, but redirect the output to a file, this time:
$ dropcaster > index.rss
If all went well, you will now have a valid podcast feed in public_html
, listing all mp3 files as podcast episodes. Please see the section Publish Your Feed for details on how to find the public URL of your feed.
-
Drop the mp3 file into the
public_html
folder, and then run the following command in that directory:$ dropcaster > index.rss
-
Sync the updated index.rss file to the public web server, and any podcast client will download the new episode as soon as it has loaded the updated index.rss.
-
Remove the mp3 you want to delete from the
public_html
folder, and then run the following command in the directory where the remaining mp3 files reside:$ dropcaster > index.rss
-
Sync the updated index.rss file to the public web server. Podcast clients will no longer download the removed episode.
-
In the
public_html
folder, replace the mp3 you want to update with a new version, and then run the following command in the directory where the mp3 files reside:$ dropcaster > index.rss
-
Sync the updated index.rss file to the public web server. Podcast clients detect the change and download the updated episode.
Dropcaster accepts any number of files or directories as episodes. For directories, all files ending in .mp3 will be included. For advanced filtering, you can use regular shell patterns to further specify which files will be included. These patterns will be resolved by the shell itself (e.g. bash), and not by Dropcaster.
For example, in order to generate a feed that only publishes MP3 files where the name starts with 'A', call Dropcaster like this:
$ dropcaster A*.mp3 > index.rss
$ dropcaster project1 > project1.rss
$ dropcaster project2 > project2.rss
or
$ cd project1
$ dropcaster > index.rss
$ cd ../project2
$ dropcaster > index.rss
$ dropcaster project1 project2 > index.rss
Dropcaster is opinionated software. That means, it makes a number of assumptions about names, files, and directory structures. Dropcaster will be most simple to use if these assumptions and opinions apply to your way of using the program.
However, it is still possible to override Dropcaster's behavior in many ways. You can, for instance, host your episode files on a different URL than the channel. Instead of writing title, subtitle, etc. to a channel.yml, you may also spedify them on the command line.
In order to find out about all the options, simply run
$ dropcaster --help
Dropcaster generates a feed that is suitable for most podcast clients, especially iTunes. By default, dropcaster follows Apple's podcast specs / recommendations.
It is also possible to customize the channel by supplying an alternative channel template on the command line. Start your own template by copying the default template, or look at the test directory of the dropcaster gem. You can get there by running gem open dropcaster
.
Besides generating an RSS feed, dropcaster can also generate HTML that can be used as a home page for your podcast. The template directory contains a sample template that can be used to get started:
$ dropcaster --channel-template templates/channel.html.erb
As discussed above, the output of this command can be written to a file, too:
$ dropcaster --channel-template templates/channel.html.erb > ~/public_html/allabouteverything.html
Dropcaster works exactly the same, whether it generates an RSS feed or a HTML page. Therefore, all options discussed before also apply when generating HTML.
If the --episode-pages
switch is present, dropcaster will generate a separate page for each episode. The result will not appear on STDOUT, but will be written to files that are named like he episode files, but with a file extension of .html
.
For example, let's assume the following directory structure:
channel.yml
episodes/episode1/AAE001 Hello World.mp3
episodes/episode2/AAE002 Getting started.mp3
episodes/episode3/AAE003 Advanced Topics.mp3
With this directory structure, Dropcaster would typically be called like this:
dropcaster episodes/episode* --channel channel.yml
In order to generate episode pages, the command would need to be modified to look as follows:
dropcaster episodes/episode* --channel channel.yml --episode-pages
If any of the files to be generated already exist, Dropcaster will not overwrite them. Adding the --force
option forces dropcaster to overwrite existing files.
The index.html page could be written with the same command by redirecting dropcaster's output to a file:
dropcaster episodes/episode* --channel channel.yml --episode-pages --channel-template hannel.html.erb > index.html
As a result, each episode will get an HTML page next to the MP3 file. The default HTML channel template will write links pointing to each episode. After calling the example command above, the esulting directory structure would look like this:
channel.yml
index.html
episodes/episode1/AAE001 Hello World.mp3
episodes/episode1/AAE001 Hello World.html
episodes/episode2/AAE002 Getting started.mp3
episodes/episode2/AAE002 Getting started.html
episodes/episode3/AAE003 Advanced Topics.mp3
episodes/episode3/AAE003 Advanced Topics.html
Please note that the example above only deals with HTML pages. The RSS feed would still have to be generated with a second call to dropcaster (see the earlier sections of this page).
Dropcaster will use its default template for generating the episode pages. It is also possible to specify a custom episode template with the --episode-template=FILE
switch, passing the name of a custom episode template file (similar to a custom channel template).
The major difference between the channel and episode HTML templates is that the episodes write out lyrics. For podcasts, lyrics are used for an in-depth description of the episode. Any text is treated as Markdown and converted to HTML.
You may override the meta data for any episode by providing a YAML file with the same name as the mp3 file, but with an extension of yml or yaml (ususally refered to as sidecar file). Any attributes specified in this file override the ID tags in the mp3 file.
Dropcaster will only write the sidecar file if the appropriate command line option was passed, and it will use the information in it only for generating new files like the index.rss. It will not write back to mp3 files.
Sidecar files are also useful for referencing a (remote) enclosure without re-hosting it (which, besides wasted bandwidth, could also create copyright issues). If a sidecar file is present and it points to a remote media URL, dropcaster will generate an item in the feed, even if the media is not available locally.
The generated XML file contains all elements required for iTunes. However, Dropcaster will not notify the iTunes store about new episodes.
If you set up an S3 bucket or Digital Ocean Space (or any other s3 compatible static asset host), you can easily sync your local podcast directory using a command line tool like s3cmd.
After installing s3cmd, make sure you have the right credentials to write to your bucket/space. Add your mp3 files to your folder, run dropcaster > index.rss
and then s3cmd sync ./ s3://$your-bucket-name --acl public-read
. S3cmd will now upload any new or changed files to your bucket.
Dropcaster uses a rather simple approach to uniquely identify the episodes. It simply generates a SHA1 hash of the mp3 file. If it changes, for whatever reason (even if only a tag was changed), the episode will get a new UUID, and any podcatcher will fetch the episode again (which is what you want, in most cases).
Modifying the sidecar file does not change the UUID, because it only affects the feed and not the episode itself.
Dropcaster uses an ERB template to generate the XML feed. The template was written so that it is easy to understand, but not necessarily in a way that would make the output rather nice-looking. That should not be an issue, as long as the XML is correct.
It you prefer a more aesthetically pleasing output, just pipe the output of Dropcaster through xmllint
, which is part of libxml:
$ dropcaster | xmllint --format -
For writing the output to a file, just redirect the ouput of the above command:
$ dropcaster | xmllint --format - > index.rss
Dropcaster uses Steve Klabnik's approach for publishing the site with Travis CI.
Copyright (c) 2011-2021 Nicolas E. Rabenau. See LICENSE.txt for further details.