From 89d11b052d234368fc0c76bd1873fb3393e31712 Mon Sep 17 00:00:00 2001 From: Julien Cohen-Adad <jcohen@polymtl.ca> Date: Fri, 25 Oct 2024 09:58:31 -0400 Subject: [PATCH] Updated 3d printing section --- rf-lab/3d-printing/README.md | 31 +++++++++++++++---------------- 1 file changed, 15 insertions(+), 16 deletions(-) diff --git a/rf-lab/3d-printing/README.md b/rf-lab/3d-printing/README.md index 6b35ed31..3dbc5855 100644 --- a/rf-lab/3d-printing/README.md +++ b/rf-lab/3d-printing/README.md @@ -1,6 +1,20 @@ # 3D Printing -## 3D Printer - Big Builder - Dual feed \(RF lab\) +## Modix Big-60 V2 - Dual feed (L5613.1) + +| Spec | Description | +| --------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------- | +| **Model** | Raspberry Pi | +| **OS** | OctoPrint | +| **Hostname** | `http://132.207.154.91` | +| **Credentials** | [NeuroPoly Internal Document: Modix Remote Credentials](https://docs.google.com/document/d/13iNhiBKYZWT9ytsvYeeYV4FJn6Wn00q9Ctka7toMV08/edit#heading=h.125uuajyox5y) | + +* [SOP Modix](https://docs.google.com/document/d/1N1sCdYy1kLsIw_NDbPVM3fTg5EPaR50NNuACbf_dI6s/edit?usp=sharing) +* {doc}`octoprint` configuration +* [Modix adjustments](https://drive.google.com/file/d/1rtaKlBJ2HbZDDPxSDA0-g0miDM7aZjVB/view?usp=sharing) + + +## Big Builder - Dual feed (L5613) * [http://3dprinter4u.nl/shop/3d-printers/big-builder-dual-feed-extruder/](http://3dprinter4u.nl/shop/3d-printers/big-builder-dual-feed-extruder/) * Before you start printing you need to do the following steps: @@ -17,21 +31,6 @@ * [Slic3r settings](https://www.neuro.polymtl.ca/internal_resources/3dprinter/settings) * [How to print a brain](https://www.neuro.polymtl.ca/internal_resources/3dprinter/print_brain) -## Modix Big-60 V2 - Dual feed \(RF lab\) - -| Spec | Description | -| --------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------- | -| **Model** | Raspberry Pi | -| **OS** | OctoPrint | -| **Hostname** | `http://132.207.154.91` | -| **Credentials** | [NeuroPoly Internal Document: Modix Remote Credentials](https://docs.google.com/document/d/13iNhiBKYZWT9ytsvYeeYV4FJn6Wn00q9Ctka7toMV08/edit#heading=h.125uuajyox5y) | - -The Modix 3D printer is remotely controlled using [OctoPrint](https://octoprint.org). To access the control interface go to the hostname and use the credentials provided above. - -* [SOP Modix](https://docs.google.com/document/d/1N1sCdYy1kLsIw_NDbPVM3fTg5EPaR50NNuACbf_dI6s/edit?usp=sharing) -* {doc}`octoprint` configuration -* [Modix adjustments](https://drive.google.com/file/d/1rtaKlBJ2HbZDDPxSDA0-g0miDM7aZjVB/view?usp=sharing) - ## Very small 3D printer \(in technician's office\)