Tolino Shine

The Tolino Shine was the first Tolino. It is similar to the Kobo Aura, except for the touch-related parts, which are like in other IR touch based Tolinos.

See also

• Booting a Kobo Aura from SD: Something similar should work. I haven't tried yet.

Hardware details

• Board model: E606E0 (hwconfig: 30)
• i.MX507 (MCIMX507CVM8B)
• ED060XG1 panel
• internal µSD card
• TI PMIC for eInk (TPS65185)
• MSP430 embedded controller
• CyberTan WC121 SDIO Wifi (BCM43362)
• zForce touch IC
• Mystery MSP430 (430 V325 J 3AI)
• external µSD slot
• frontlight

TODO list

MSP430 EC

• I2C setup in general
• I2C/IRQ
• PWM
• RTC
• battery monitoring

Touch (zForce)

• I2C: i2c1:0x50
• IRQ: GPIO5[15]

GPIO buttons (KEYPAD controller is not used)

• column signals?
• button setup, GPIO numbers

LEDs

This board has no indicator LEDs. (There is a footprint for LED1, but it's unpopulated.)

MMC

• SD2_CD
• general setup

Frontlight

• TABLE1 (hwconfig indicates TABLE0, but there's a special case for this board, to select TABLE1); beware the 330
• GPIOs: FL_EN (active low), FL_R_EN (active high)

TPS65185/EPDC

• TPS65185 GPIOs