VPSS 硬件加速测试 Failed on LicheeNano Board

[szpapas2020]

这里是输出结果，

------------Combo DEV ATTR--------------
Devno WorkMode DataType WDRMode LinkId PN Swap SyncMode DataEndian SyncCodeEndian
0 MIPI RAW10 NONE 2, 1, 0,-1,-1 0, 0, 0, 0, 0 N/A N/A N/A

LinkID 指向的是2,1,0

实际GC4653的MIPI是 4,3,2-1-1 不知道是不是这个原因。

# cat sensor_cfg.ini
[source]

;type = SOURCE_USER_FE

dev_num = 1

; section for sensor

[sensor]

; sensor name
name = GCORE_GC4653_MIPI_4M_30FPS_10BIT

bus_id = 4

sns_i2c_addr = 29

mipi_dev = 0

lane_id = 4, 3, 2, -1, -1

pn_swap = 0, 0, 0, 0, 0

mclk_en = 1

mclk = 1

# export LD_LIBRARY_PATH=/mnt/system/usr/lib/:$LD_LIBRARY_PATH
# ./opencv-mobile-test
opencv-mobile MIPI CSI camera with cvi
opencv-mobile HW JPG decoder with cvi
ISP Vipipe(0) Allocate pa(0x8c8cc000) va(0x0x3fd1d5f000) size(291424)
awbInit ver 6.9@2021500
0 R:1400 B:3100 CT:2850
1 R:1500 B:2500 CT:3900
2 R:2300 B:1600 CT:6500
Golden 1024 1024 1024
WB Quadratic:0
isWdr:0
ViPipe:0,===GC4653 1440P 30fps 10bit LINEAR Init OK!===
binName = /mnt/cfg/param/cvi_sdr_bin
********************************************************************************
cvi_bin_isp message
gerritId:      97347          commitId:      fc6ce647
md5:           d6db2297ddfd44e8252c1f3f888f47b2
sensorNum      1
sensorName0    4653

PQBIN message
gerritId:
              commitId:      fc6ce647
md5:           d6db2297ddfd44e8252c1f3f888f47b2
sensorNum      1
sensorName0    4653

author:        lxowalle       desc:          gc4653 30fps
createTime:    2024-03-26 13:41:34version:
tool Version:       v3.0.5.48           mode:
********************************************************************************
320 x 240

Module: [MIPI_RX], Build Time[#7 PREEMPT Sat Aug 3 00:06:17 CST 2024]

------------Combo DEV ATTR--------------
   Devno  WorkMode  DataType   WDRMode         LinkId        PN Swap  SyncMode  DataEndian  SyncCodeEndian
       0      MIPI     RAW10      NONE  2, 1, 0,-1,-1  0, 0, 0, 0, 0       N/A         N/A             N/A

------------MIPI info-------------------
 Devno EccErr CrcErr HdrErr WcErr fifofull   decode
     0      0      0      0     0        0  unknown
  Physical:       D0       D1       D2       D3       D4       D5
                   0        0        0        0        0        0
   Digital:       D0       D1       D2       D3    CK_HS  CK_ULPS  CK_STOP   CK_ERR   Deskew
             hs_idle  hs_idle  hs_idle  hs_idle        1        0        0        0     idle
VI_SDK_IOC_S_CTRL - vi_sdk_get_chn_frame NG, Operation not permitted
CVI_VI_GetChnFrame failed c00e8040
[VI BE_Dbg_Info]
VIPreBEDoneSts          :0x0            VIPreBEDmaIdleStatus    :0x0
[VI Post_Dbg_Info]
VIIspTopStatus          :0x0
[VI DMA_Dbg_Info]
VIWdma0ErrStatus        :0x0    VIWdma0IdleStatus       :0x0
VIWdma1ErrStatus        :0x0    VIWdma1IdleStatus       :0x0
VIRdmaErrStatus         :0x0    VIRdmaIdleStatus        :0x0
[VI ISP_PIPE_A FE_Dbg_Info]
VIPreFERawDbgSts        :0x0            VIPreFEDbgInfo          :0x0
[VI ISP_PIPE_A]
VIOutImgWidth           :2560
VIOutImgHeight          :1440
VIInImgWidth            :2560
VIInImgHeight           :1440
VIDevFPS                :   0
VIFPS                   :   0
VISofCh0Cnt             :   0
VIPreFECh0Cnt           :   0
VIPreBECh0Cnt           :   0
VIPostCnt               :   0
VIDropCnt               :   0
VIDumpCnt               :   0
[VI ISP_PIPE_A Csi_Dbg_Info]
VICsiIntStatus0         :0x0
VICsiIntStatus1         :0x0
VICsiCh0Dbg             :0x0
VICsiCh1Dbg             :0x0
VICsiOverFlowCnt        :   0
VICsiCh0WidthGTCnt      :   0
VICsiCh0WidthLSCnt      :   0
VICsiCh0HeightGTCnt     :   0
VICsiCh0HeightLSCnt     :   0

Module: [MIPI_RX], Build Time[#7 PREEMPT Sat Aug 3 00:06:17 CST 2024]

------------Combo DEV ATTR--------------
   Devno  WorkMode  DataType   WDRMode         LinkId        PN Swap  SyncMode  DataEndian  SyncCodeEndian
       0      MIPI     RAW10      NONE  2, 1, 0,-1,-1  0, 0, 0, 0, 0       N/A         N/A             N/A

------------MIPI info-------------------
 Devno EccErr CrcErr HdrErr WcErr fifofull   decode
     0      0      0      0     0        0  unknown
  Physical:       D0       D1       D2       D3       D4       D5
                   0        0        0        0        0        0
   Digital:       D0       D1       D2       D3    CK_HS  CK_ULPS  CK_STOP   CK_ERR   Deskew
             hs_idle  hs_idle  hs_idle  hs_idle        1        0        0        0     idle
VI_SDK_IOC_S_CTRL - vi_sdk_get_chn_frame NG, Operation not permitted
CVI_VI_GetChnFrame failed c00e8040
[VI BE_Dbg_Info]
VIPreBEDoneSts          :0x0            VIPreBEDmaIdleStatus    :0x0
[VI Post_Dbg_Info]
VIIspTopStatus          :0x0
[VI DMA_Dbg_Info]
VIWdma0ErrStatus        :0x0    VIWdma0IdleStatus       :0x0
VIWdma1ErrStatus        :0x0    VIWdma1IdleStatus       :0x0
VIRdmaErrStatus         :0x0    VIRdmaIdleStatus        :0x0
[VI ISP_PIPE_A FE_Dbg_Info]
VIPreFERawDbgSts        :0x0            VIPreFEDbgInfo          :0x0
[VI ISP_PIPE_A]
VIOutImgWidth           :2560
VIOutImgHeight          :1440
VIInImgWidth            :2560
VIInImgHeight           :1440
VIDevFPS                :   0
VIFPS                   :   0
VISofCh0Cnt             :   0
VIPreFECh0Cnt           :   0
VIPreBECh0Cnt           :   0
VIPostCnt               :   0
VIDropCnt               :   0
VIDumpCnt               :   0
[VI ISP_PIPE_A Csi_Dbg_Info]
VICsiIntStatus0         :0x0
VICsiIntStatus1         :0x0
VICsiCh0Dbg             :0x0
VICsiCh1Dbg             :0x0
VICsiOverFlowCnt        :   0
VICsiCh0WidthGTCnt      :   0
VICsiCh0WidthLSCnt      :   0
VICsiCh0HeightGTCnt     :   0
VICsiCh0HeightLSCnt     :   0

[szpapas2020]

LicheRV Nano 70405的硬件是2,1,0, 新版的70415和70418用的是 4,3,2. 能不能修改成从sensor_cfg.ini 文件中读取

[ret7020]

Do you solve problem?

[ret7020]

I think you can just patch capture_cvi.cpp with new correct pins. And no need to read ini file each time. Or add some define for old board pins and new