README.md

Hyperledger Fabric Client SDK for Node.js

The Hyperledger Fabric Client SDK makes it possible to use APIs to interact with a Hyperledger Fabric blockchain.

As an application developer, to learn about how to install and use the Node.js SDK, please visit the SDK documentation.

This project publishes three separate npm packages:

• fabric-client - main client for the Hyperledger Fabric. Applications can use this package to install and instantiate chaincodes, submit transactions and make queries against a Hyperledger Fabric-based blockchain network.
• fabric-ca-client - client for the optional component in Hyperledger Fabric, fabric-ca. The fabric-ca component allows applications to enroll Peers and application users to establish trusted identities on the blockchain network. It also provides support for pseudonymous transaction submissions with Transaction Certificates. If the target blockchain network is configured with standard Certificate Authorities for trust anchors, the application does not need to use this package.
• fabric-network - This package encapsulates the APIs to connect to a Fabric network, submit transactions and perform queries against the ledger at a higher level of abstraction than through the fabric-client.

The following section targets a current or future contributor to this project itself.

Build and Test

To build and test, the following pre-requisites must be installed first:

• node runtime LTS version 8.9.0 or higher, up to 9.0 ( Node v9.0+ is not supported )
• npm tool version 5.5.1 or higher
• gulp command (must be installed globaly with npm install -g gulp)
• docker (not required if you only want to run the headless tests with npm test, see below)

Clone the project and launch the following commands to install the dependencies and perform various tasks.

In the project root folder:

• npm install to install dependencies
• optionally, gulp docs to generate API docs if you want to review the doc content
• npm test or gulp test-headless to run the headless tests that do not require any additional set up

The following tests require setting up a local blockchain network as the target. You need to build the necessary Docker images required to run the network. Follow the steps below to set it up.

• You will need the peers, orderers and fabric-ca server (new implementation of the member service) to run the tests. The first two components are from the fabric repository. The fabric-ca server is from the fabric-ca repository.
• git clone both the fabric and fabric-ca repositories into the $GOPATH/src/github.com/hyperledger folder in your native host (MacOS, Windows or Ubuntu, etc).

You can build the docker images in your native host (Mac, Ubuntu, Windows, etc.):

• If docker is installed and it’s not ‘Docker for Mac/Windows’, uninstall and follow Docker’s clean up instructions to uninstall completely.

• Install ‘Docker for Mac’ or Docker for Windows, or Docker on linux

• Only for Mac, you need to install a gnu-compatible version of the tar utility:

  • Install Brew: http://brew.sh
  • run brew install gnu-tar —-with-default-names in order to swap out Mac's default tar command for a gnu-compliant one needed by chaincode execution on the peers

• build fabric-ca docker image (new membership service)

  • cd $GOPATH/src/github.com/hyperledger/fabric-ca
  • run make docker. For more build instructions see fabric-ca README

• build fabric peer and orderer docker images and other ancillary images

  • cd $GOPATH/src/github.com/hyperledger/fabric
  • run make docker to build the docker images (you may need to run make docker-clean first if you've built before)

• Now you are ready to run the tests:

  • Clear out your previous key value stores that may have cached user enrollment certificates (rm -rf /tmp/hfc-*, rm -rf ~/.hfc-key-store)
  • run gulp test to execute the entire test suite (800+ test cases), or you can run them individually
  • Test happy path from end to end, run node test/integration/e2e.js
  • Test end to end one step at a time, make sure to follow this sequence:
    • node test/integration/e2e/create-channel.js
    • node test/integration/e2e/join-channel.js
    • node test/integration/e2e/updateAnchorPeers.js
    • node test/integration/e2e/install-chaincode.js
    • node test/integration/e2e/instantiate-chaincode.js
    • node test/integration/e2e/invoke-transaction.js
    • node test/integration/e2e/query.js
  • Test user management by member services with the following tests that exercise the fabric-ca-client package with a KeyValueStore implementations for a file-based KeyValueStore as well as a CouchDB KeyValueStore. To successfully run this test, you must first set up a CouchDB database instance on your local machine. Please see the instructions below.
    • test/integration/fabric-ca-services-tests.js
    • test/integration/couchdb-fabricca-tests.js
    • test/integration/cloudant-fabricca-tests.js
  • To re-run node test/integration/e2e.js or fabric-ca-services-tests.js stop the network (ctrl-c), clean up the docker instances (docker rm $(docker ps -aq)) and restart the network with docker-compose up as described above.

Special Tests for Hardware Security Module support via PKCS#11 interface

The SDK has support for PKCS#11 interface in order to allow applications to make use of HSM devices for key management. To turn these tests off, set environment variable "PKCS11_TESTS" to "false". In order to run the tests:

• Install a software emulator of the PKCS#11 interface. The unit tests have been tried with SoftHSM2:
  • install using the package manager for your host system:
    • Ubuntu: apt-get install softhsm2
    • macOS: brew install softhsm
  • or install from source:
    • install openssl 1.0.0+ or botan 1.10.0+
    • download the source code from https://dist.opendnssec.org/source/softhsm-2.2.0.tar.gz
    • tar -xvf softhsm-2.2.0.tar.gz
    • cd softhsm-2.2.0
    • ./configure --disable-gost (would require additional libraries, turn it off unless you need gost algorithm support for the Russian market)
    • make
    • sudo make install
  • set environment variable "SOFTHSM2_CONF" to "./test/fixtures/softhsm2.conf"
  • create a token to store keys inside slot 0: softhsm2-util --init-token --slot 0 --label "My token 1", you will be prompted two PINs: SO (Security Officer) PIN that can be used to re-initialize the token, and user PIN to be used by applications to access the token for generating and retrieving keys

The unit test assumes slot '0' and user PIN 98765432. If your configuration is different, use these environment variables to pass in the values:

• PKCS11_LIB - path to the SoftHSM2 library, if not specified, the test case searches through a list of popular install locaions
• PKCS11_PIN
• PKCS11_SLOT

Hyperledger Fabric Client objects and reference documentation

The SDK has support for Java based Chaincode. To turn these tests off, set the environment variable "JAVA_TESTS" to false.

Hyperledger Fabric Client objects

fabric-client and fabric-ca-client are written in CommonJS modules and take advantage of ECMAScript 2015 class syntax.

• The main top-level class is Client. The client's view of a fabric [channel] is the class Channel. The SDK allows you to interact with multiple channels. A channel object can be configured with a different ordering service or share a common ordering service, depending on how the target blockchain network is set up. A client object has a KeyValueStore to store private keys and certificates for authenticated users. Through the client object the application can perform
• The KeyValueStore is a very simple interface which SDK uses to store and retrieve all persistent data. This data includes private keys, so it is very important to keep this storage secure. The default implementation is a simple file-based version found in the FileKeyValueStore class. The SDK also provides an implementation based on CouchDB which can be configured to use a local CouchDB database or a remote deployment including a Cloudant database.
• The User class represents an end user who transacts on the channel. The user object must have a valid enrollment configured in order to properly sign transaction requests. The enrollment materials can either be obtained from enrolling with fabric-ca or an external Certificate Authority.
• The FabricCAClientImpl class provides security and identity related features such as user registration and enrollment, transaction certificate issuance. The Hyperledger Fabric has a built-in implementation that issues ECerts (enrollment certificates) and TCerts (transaction certificates). ECerts are for enrollment identity and TCerts are for transactions.

Pluggability

HFC defines the following abstract classes for application developers to supply extensions or alternative implementations. For each abstract class, a built-in implementation is included with the ability to load alternative implementations via designated environment variables:

1. To replace FileKeyValueStore with a different implementation, such as one that saves data to a database, specify "KEY_VALUE_STORE" and provide the full require() path to an alternative implementation of the api.KeyValueStore abstract class.

2. The cryptography suite used by the default implementation uses ECDSA for asymmetric keys cryptography, AES for encryption and SHA2/3 for secure hashes. A different suite can be plugged in with "CRYPTO_SUITE" environment variable specifying full require() path to the alternative implementation of the api.CrytoSuite abstract class.

3. If the user application uses an alternative membership service than the one provided by the component fabric-ca, the client code will likely need to use an alternative client to fabric-ca-client to interact with that membership service.

Continuous Integration

Please have a look at Continuous Integration Process

Contributing

Check the documentation on how to contribute to this project for the full details.

This work is licensed under a Creative Commons Attribution 4.0 International License.