T91x nrf53 wifi shell #309
Draft
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
from zcbor 0.8.0 Signed-off-by: Øyvind Rønningstad <[email protected]> (cherry picked from commit ad5f0ac) (cherry picked from commit 51a7821)
And update script Signed-off-by: Øyvind Rønningstad <[email protected]> (cherry picked from commit a899390) (cherry picked from commit f29720b)
New arguments in zcbor_new_state are set to NULL/0 because they are only needed when using the zcbor_unordered_map API. Signed-off-by: Øyvind Rønningstad <[email protected]> (cherry picked from commit 63ddb71) (cherry picked from commit b16b1a9)
from zcbor 0.8.1 Signed-off-by: Øyvind Rønningstad <[email protected]> (cherry picked from commit c8d213a) (cherry picked from commit ff23755)
Change one _term to _lit that was missed earlier. Signed-off-by: Øyvind Rønningstad <[email protected]> (cherry picked from commit 205d7e5) (cherry picked from commit 55a0f64)
adding WATCHDOG_FEED support for WDT30 and WDT31 Signed-off-by: Mateusz Michalek <[email protected]> (cherry picked from commit c3a72e9) Signed-off-by: Andrzej Puzdrowski <[email protected]> (cherry picked from commit b2b1677)
Adds default Kconfig configuration that allows to build MCUboot for NRF54L. Currently this configuration turns off WDT and FPROTECT, which is TODO to fix. Signed-off-by: Dominik Ermel <[email protected]> Signed-off-by: Mateusz Michalek <[email protected]> (cherry picked from commit 4b4cc85) Signed-off-by: Andrzej Puzdrowski <[email protected]> (cherry picked from commit 73e1106)
Upstream PR: mcu-tools/mcuboot#1901 Renamed the DK config file to proper name. Signed-off-by: Andrzej Puzdrowski <[email protected]> (cherry picked from commit bd1464f69934ff37f91321da397fb1398907c946) (cherry picked from commit 42a1eb6)
…i-image In multi image swap validation of images could fail due to headers being incorrectly re-read from storage. Fixes #1768 Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit 6f7f873) (cherry picked from commit cb64eca)
Add Jenkinsfile, .gitlint, and backport workflow files. Signed-off-by: Thomas Stilwell <[email protected]> Signed-off-by: Ulrich Myhre <[email protected]> Signed-off-by: Chris Bittner <[email protected]> Signed-off-by: Martí Bolívar <[email protected]> Signed-off-by: Andrzej Puzdrowski <[email protected]> Signed-off-by: Johann Fischer <[email protected]> Signed-off-by: Torsten Rasmussen <[email protected]> Signed-off-by: Jamie McCrae <[email protected]> (cherry picked from commit 39f179d)
Use the generic commit-tags action to provide sauce tag checks. Signed-off-by: Carles Cufi <[email protected]> (cherry picked from commit d9ed9a6)
Removes the `add_subdirectory` of nrfxlib it will still check that the nrfxlib is located outside the mcuboot directory. Signed-off-by: Sigvart Hovland <[email protected]> Signed-off-by: Andrzej Puzdrowski <[email protected]> Signed-off-by: Martí Bolívar <[email protected]> Signed-off-by: Emil Obalski <[email protected]> Signed-off-by: Andrzej Puzdrowski <[email protected]> Signed-off-by: Håkon Øye Amundsen <[email protected]> Signed-off-by: Ioannis Glaropoulos <[email protected]> Signed-off-by: Torsten Rasmussen <[email protected]> Signed-off-by: Jamie McCrae <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit cf90d55)
Add prj_minimal.conf, a Kconfig fragment to be used for minimally sized image production. The minimal fragment has been simplified for only external crypto. Move partition sizing into Kconfig to be consistent with the method used by b0. Using this fragment with prj_minimal.conf makes MCUboot < 16kB for all nRF devices (9160 still needs 32kB partition). Ref: NCSDK-6704 Signed-off-by: Stephen Stauts <[email protected]> Signed-off-by: Martí Bolívar <[email protected]> Signed-off-by: Sebastian Bøe <[email protected]> Signed-off-by: Torsten Rasmussen <[email protected]> Signed-off-by: Jamie McCrae <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit 5b6e0b2)
Adds project configurations for the two systems on the Thingy:91 (PCA-20035) board. The bootloader that is factory-programmed on thing91 does not support ECDSA signature type. Hence this commit also sets the signature type to RSA for applications built for Thingy:91. Signed-off-by: Bernt Johan Damslora <[email protected]> Signed-off-by: Sigvart Hovland <[email protected]> Signed-off-by: Jon Helge Nistad <[email protected]> Signed-off-by: Balaji Srinivasan <[email protected]> Signed-off-by: Robert Lubos <[email protected]> Signed-off-by: Torsten Rasmussen <[email protected]> Signed-off-by: Jamie McCrae <[email protected]> Signed-off-by: Marek Pieta <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit 74bb73a)
Seems multi-image dependencies are not supported for multi-image in NCS yet. This is a workaround which reverts some lines to restore previous MCUboot behavior, so that Immutable bootloader + MCUBoot type builds will work. Ref. NCSDK-8681 Signed-off-by: Sigvart Hovland <[email protected]> Signed-off-by: Torsten Rasmussen <[email protected]> Signed-off-by: Jamie McCrae <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit e02925a)
* Add functions for ecdsa_verify_secp256r1 and sha256 to use the shared crypto API * Add Kconfig and CMake variables for selecting shared crypto when using ecdsa * Add custom section to project for placing the API section in the correct location in flash * Add kconfig fragment for using external crypto Signed-off-by: Sigvart Hovland <[email protected]> Signed-off-by: Martí Bolívar <[email protected]> Signed-off-by: Emil Obalski <[email protected]> Signed-off-by: Andrzej Puzdrowski <[email protected]> Signed-off-by: Håkon Øye Amundsen <[email protected]> Signed-off-by: Ioannis Glaropoulos <[email protected]> Signed-off-by: Trond Einar Snekvik <[email protected]> Signed-off-by: Georgios Vasilakis <[email protected]> Signed-off-by: Johann Fischer <[email protected]> Signed-off-by: Torsten Rasmussen <[email protected]> Signed-off-by: Jamie McCrae <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit 5f71e80) (cherry picked from commit beebb23)
The CC310 and bl_crypto require decoded signature instead of raw ASN.1 Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit 685c58e)
After the upmerge using external crypto from NSIB in MCUBoot resulted in build failures. This commit fixes the build failures but also fixes a change in the API call which resulted in `-102` error when calling the verify function. Ref. NCSDK-23994 Signed-off-by: Sigvart Hovland <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit 4015754)
-This sets the provide EXT_API to be at least optional when the external_crypto is being used. Ref: NCSDK-12021 Signed-off-by: Georgios Vasilakis <[email protected]> Signed-off-by: Torsten Rasmussen <[email protected]> Signed-off-by: Jamie McCrae <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit c8e7fbd)
The default value of CONFIG_NRF_RTC_TIMER_USER_CHAN_COUNT for nRF52 SOCs has been changed from 0 to 3, but it makes MCUBoot get stuck on erasing flash pages when swapping two images. Restore the previous value until the RTC issue is resolved (see NCSDK-14427) Signed-off-by: Damian Krolik <[email protected]> Signed-off-by: Torsten Rasmussen <[email protected]> Signed-off-by: Jamie McCrae <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit 9fa2c07)
Partition Manager is an nRF Connect SDK component which uses yaml files to resolve flash partition placement with a holistic view of the device. This component's MCUboot portions began life as upstream mcuboot PR#430. This added support for being built as a sub image from the downstream Nordic patch set for a zephyr multi image build system (mcuboot 430 was combined with effor submitted to upstream zephyr as PR#13672, which was ultimately reworked after being rejected for mainline at the ELCE 2019 conference in Lyon). It has since evolved over time. This is the version that will go into NCS v1.3. It features: - page size aligned partitions for all partitions used by mcuboot. - image swaps without scratch partitions Add support for configurations where there exists two primary slots but only one secondary slot, which is shared. These two primary slots are the regular application and B1. B1 can be either S0 or S1 depending on the state of the device. Decide where an upgrade should be stored by looking at the vector table. Provide update candidates for both s0 and s1. These candidates must be signed with mcuboot after being signed by b0. Additional notes: - we make update.hex without trailer data This is needed for serial recovery to work using hex files. Prior to this the update.hex got TLV data at the end of the partition, which caused many blank pages to be included, which made it hard to use in a serial recovery scheme. Instead, make update.hex without TLV data at the end, and provide a new file test_update.hex which contains the TLV data, and can be directly flashed to test the upgrade procedure. - we use a function for signing the application as future-proofing for when other components must be signed as well - this includes an update to single image applications that enables support for partition manager; when single image DFU is used, a scratch partition is not needed. - In NCS, image 1 primary slot is the upgrade bank for mcuboot (IE S0 or S1 depending on the active slot). It is not required that this slot contains any valid data. - The nRF boards all have a single flash page size, and partition manager deals with the size of the update partitions and so on, so we must skip a boot_slots_compatible() check to avoid getting an error. - There is no need to verify the target when using partition manager. - We lock mcuboot using fprotect before jumping, to enable the secure boot property of the system. - Call fw_info_ext_api_provide() before booting if EXT_API_PROVIDE EXT_API is enabled. This is relevant only when the immutable bootloader has booted mcuboot. Signed-off-by: Håkon Øye Amundsen <[email protected]> Signed-off-by: Øyvind Rønningstad <[email protected]> Signed-off-by: Sebastian Bøe <[email protected]> Signed-off-by: Sigvart Hovland <[email protected]> Signed-off-by: Martí Bolívar <[email protected]> Signed-off-by: Torsten Rasmussen <[email protected]> Signed-off-by: Andrzej Głąbek <[email protected]> Signed-off-by: Robert Lubos <[email protected]> Signed-off-by: Andrzej Puzdrowski <[email protected]> Signed-off-by: Emil Obalski <[email protected]> Signed-off-by: Pawel Dunaj <[email protected]> Signed-off-by: Ioannis Glaropoulos <[email protected]> Signed-off-by: Johann Fischer <[email protected]> Signed-off-by: Vidar Berg <[email protected]> Signed-off-by: Draus, Sebastian <[email protected]> Signed-off-by: Trond Einar Snekvik <[email protected]> Signed-off-by: Jamie McCrae <[email protected]> Signed-off-by: Joakim Andersson <[email protected]> Signed-off-by: Georgios Vasilakis <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit 71fe2df)
- Add network core bootloader implementation Enables network core updates of nrf53 using MCUBoot by identifying images through their start addresses. Also implements the control and transfer using the PCD module. - Add support for multi image DFU using partition manager. - Add check for netcore addr if NSIB is enabled so netcore updates works - boot: zephyr: move thingy53_nrf5340_cpuapp.conf downstream Moved the board configuration for Thingy:53 Application Core to the nRF Connect SDK MCUboot downstream repository. The configuration file contains references to the Kconfig modules that are only available in the nRF Connect SDK. The current configuration is set up to work in the nRF Connect SDK environment and cannot be used upstream. - pm: enable ram flash partition using common flag This patch makes mcuboot_primary_1 ram-flash partition selectable using CONFIG_NRF53_MCUBOOT_PRIMARY_1_RAM_FLASH property. This is needed since CONFIG_NRF53_MULTI_IMAGE_UPDATE become not only configuration which requires that partition. - MCUBoot configures USB CDC by its own. There is no need for BOARD_SERIAL_BACKEND_CDC_ACM option to configure anything which is later overwritten anyway. Jira: NCSDK-18596 Signed-off-by: Andrzej Puzdrowski <[email protected]> Signed-off-by: Emil Obalski <[email protected]> Signed-off-by: Håkon Øye Amundsen <[email protected]> Signed-off-by: Ioannis Glaropoulos <[email protected]> Signed-off-by: Jamie McCrae <[email protected]> Signed-off-by: Johann Fischer <[email protected]> Signed-off-by: Kamil Piszczek <[email protected]> Signed-off-by: Ole Sæther <[email protected]> Signed-off-by: Sigvart Hovland <[email protected]> Signed-off-by: Simon Iversen <[email protected]> Signed-off-by: Torsten Rasmussen <[email protected]> Signed-off-by: Trond Einar Snekvik <[email protected]> Signed-off-by: Mateusz Kapala <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit 2bbd3b1) (cherry picked from commit 0098451)
Do some cleanup of nRF peripherals. This is necessary since Zephyr doesn't have any driver deinitialization functionality, and we'd like to leave peripherals in a more predictable state before booting the Zephyr image. This should be re-worked when the zephyr driver model allows us to deinitialize devices cleanly before jumping to the chain-loaded image. Signed-off-by: Andrzej Puzdrowski <[email protected]> Signed-off-by: Robert Lubos <[email protected]> Signed-off-by: Torsten Rasmussen <[email protected]> Signed-off-by: Øyvind Rønningstad <[email protected]> Signed-off-by: Martí Bolívar <[email protected]> Signed-off-by: Håkon Øye Amundsen <[email protected]> Signed-off-by: Ioannis Glaropoulos <[email protected]> Signed-off-by: Johann Fischer <[email protected]> Signed-off-by: Trond Einar Snekvik <[email protected]> Signed-off-by: Torsten Rasmussen <[email protected]> Signed-off-by: Jamie McCrae <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit 4c8e041)
To ensure that MCUBoot does not leak keys or other material through memory to non-secure side we clear the memory before jumping to the next image. Signed-off-by: Sigvart Hovland <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> Signed-off-by: Ole Sæther <[email protected]> (cherry picked from commit b8a544d) (cherry picked from commit 7f2386f)
When mcuboot_secondary is on external flash, the image header cannot dircetly be accessed via secondary_fa->fa_off. Instead the provided function boot_img_hdr() is used now. Additionally a similar issue is present when trying to read the address of the reset handler. For this flash_area_read() is used now. With this patch is possible to have the update partiton mcuboot_secondary on external flash and update a updatable bootloader (mcuboot) in s0 and/or s1. Signed-off-by: Christian Taedcke <[email protected]> Signed-off-by: Ole Sæther <[email protected]> Signed-off-by: Sigvart Hovland <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit 9403865)
Fixes path variables to use the proper Zephyr module variables Signed-off-by: Jamie McCrae <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit be3e7c6)
Fixes a missing PCD define check, an image might have the network core partition layout set but if PCD support is not enabled then it should not assume that PCD support is part of mcuboot. Signed-off-by: Jamie McCrae <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit 5932630)
This adds support for using both NSIB and the multi-image configuration in MCUboot. Before this was not possible due to upgradable bootloader support through NSIB was using the `UPDATEABLE_IMAGE_NUMBER` configuration to update the updateable bootloader. In this commit we change from using `FLASH_AREA_IMAGE_PRIMARY` to get the flash area ID to using the bootloader state where we set the flash area ID of the free updatable bootloader slot if the image is intended for this slot. Ref. NCSDK-19223 Ref. NCSDK-23305 Signed-off-by: Sigvart Hovland <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit 03af90f) (cherry picked from commit 0d43674)
Making sysflash.h and pm_sysflash.h more readable. Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit c3b33eb)
The commit modifies pm_sysflash.h to add support for three application images. Ref. NCSDK-19223 Signed-off-by: Dominik Ermel <[email protected]> Signed-off-by: Sigvart Hovland <[email protected]> (cherry picked from commit 77c7e25) (cherry picked from commit d700515)
This reverts commit 2009587. Signed-off-by: Robert Lubos <[email protected]>
This reverts commit 80016fd. Signed-off-by: Robert Lubos <[email protected]>
This reverts commit df01761. Signed-off-by: Robert Lubos <[email protected]>
This reverts commit 9e03ad4. Signed-off-by: Robert Lubos <[email protected]>
This reverts commit e5d5708. Signed-off-by: Robert Lubos <[email protected]>
This reverts commit fc20e9b. Signed-off-by: Robert Lubos <[email protected]>
This reverts commit 0c539f6. Signed-off-by: Robert Lubos <[email protected]>
This reverts commit b137da6. Signed-off-by: Robert Lubos <[email protected]>
Regular upmerge. Signed-off-by: Robert Lubos <[email protected]>
Partition Manager is an nRF Connect SDK component which uses yaml files to resolve flash partition placement with a holistic view of the device. This component's MCUboot portions began life as upstream mcuboot PR#430. This added support for being built as a sub image from the downstream Nordic patch set for a zephyr multi image build system (mcuboot 430 was combined with effor submitted to upstream zephyr as PR#13672, which was ultimately reworked after being rejected for mainline at the ELCE 2019 conference in Lyon). It has since evolved over time. This is the version that will go into NCS v1.3. It features: - page size aligned partitions for all partitions used by mcuboot. - image swaps without scratch partitions Add support for configurations where there exists two primary slots but only one secondary slot, which is shared. These two primary slots are the regular application and B1. B1 can be either S0 or S1 depending on the state of the device. Decide where an upgrade should be stored by looking at the vector table. Provide update candidates for both s0 and s1. These candidates must be signed with mcuboot after being signed by b0. Additional notes: - we make update.hex without trailer data This is needed for serial recovery to work using hex files. Prior to this the update.hex got TLV data at the end of the partition, which caused many blank pages to be included, which made it hard to use in a serial recovery scheme. Instead, make update.hex without TLV data at the end, and provide a new file test_update.hex which contains the TLV data, and can be directly flashed to test the upgrade procedure. - we use a function for signing the application as future-proofing for when other components must be signed as well - this includes an update to single image applications that enables support for partition manager; when single image DFU is used, a scratch partition is not needed. - In NCS, image 1 primary slot is the upgrade bank for mcuboot (IE S0 or S1 depending on the active slot). It is not required that this slot contains any valid data. - The nRF boards all have a single flash page size, and partition manager deals with the size of the update partitions and so on, so we must skip a boot_slots_compatible() check to avoid getting an error. - There is no need to verify the target when using partition manager. - We lock mcuboot using fprotect before jumping, to enable the secure boot property of the system. - Call fw_info_ext_api_provide() before booting if EXT_API_PROVIDE EXT_API is enabled. This is relevant only when the immutable bootloader has booted mcuboot. Signed-off-by: Håkon Øye Amundsen <[email protected]> Signed-off-by: Øyvind Rønningstad <[email protected]> Signed-off-by: Sebastian Bøe <[email protected]> Signed-off-by: Sigvart Hovland <[email protected]> Signed-off-by: Martí Bolívar <[email protected]> Signed-off-by: Torsten Rasmussen <[email protected]> Signed-off-by: Andrzej Głąbek <[email protected]> Signed-off-by: Robert Lubos <[email protected]> Signed-off-by: Andrzej Puzdrowski <[email protected]> Signed-off-by: Emil Obalski <[email protected]> Signed-off-by: Pawel Dunaj <[email protected]> Signed-off-by: Ioannis Glaropoulos <[email protected]> Signed-off-by: Johann Fischer <[email protected]> Signed-off-by: Vidar Berg <[email protected]> Signed-off-by: Draus, Sebastian <[email protected]> Signed-off-by: Trond Einar Snekvik <[email protected]> Signed-off-by: Jamie McCrae <[email protected]> Signed-off-by: Joakim Andersson <[email protected]> Signed-off-by: Georgios Vasilakis <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit 71fe2df) (cherry picked from commit 80016fd) Signed-off-by: Robert Lubos <[email protected]>
- Add network core bootloader implementation Enables network core updates of nrf53 using MCUBoot by identifying images through their start addresses. Also implements the control and transfer using the PCD module. - Add support for multi image DFU using partition manager. - Add check for netcore addr if NSIB is enabled so netcore updates works - boot: zephyr: move thingy53_nrf5340_cpuapp.conf downstream Moved the board configuration for Thingy:53 Application Core to the nRF Connect SDK MCUboot downstream repository. The configuration file contains references to the Kconfig modules that are only available in the nRF Connect SDK. The current configuration is set up to work in the nRF Connect SDK environment and cannot be used upstream. - pm: enable ram flash partition using common flag This patch makes mcuboot_primary_1 ram-flash partition selectable using CONFIG_NRF53_MCUBOOT_PRIMARY_1_RAM_FLASH property. This is needed since CONFIG_NRF53_MULTI_IMAGE_UPDATE become not only configuration which requires that partition. - MCUBoot configures USB CDC by its own. There is no need for BOARD_SERIAL_BACKEND_CDC_ACM option to configure anything which is later overwritten anyway. Jira: NCSDK-18596 Signed-off-by: Andrzej Puzdrowski <[email protected]> Signed-off-by: Emil Obalski <[email protected]> Signed-off-by: Håkon Øye Amundsen <[email protected]> Signed-off-by: Ioannis Glaropoulos <[email protected]> Signed-off-by: Jamie McCrae <[email protected]> Signed-off-by: Johann Fischer <[email protected]> Signed-off-by: Kamil Piszczek <[email protected]> Signed-off-by: Ole Sæther <[email protected]> Signed-off-by: Sigvart Hovland <[email protected]> Signed-off-by: Simon Iversen <[email protected]> Signed-off-by: Torsten Rasmussen <[email protected]> Signed-off-by: Trond Einar Snekvik <[email protected]> Signed-off-by: Mateusz Kapala <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit 2bbd3b1) (cherry picked from commit 0098451) (cherry picked from commit 2009587) Signed-off-by: Robert Lubos <[email protected]>
Do some cleanup of nRF peripherals. This is necessary since Zephyr doesn't have any driver deinitialization functionality, and we'd like to leave peripherals in a more predictable state before booting the Zephyr image. This should be re-worked when the zephyr driver model allows us to deinitialize devices cleanly before jumping to the chain-loaded image. Signed-off-by: Andrzej Puzdrowski <[email protected]> Signed-off-by: Robert Lubos <[email protected]> Signed-off-by: Torsten Rasmussen <[email protected]> Signed-off-by: Øyvind Rønningstad <[email protected]> Signed-off-by: Martí Bolívar <[email protected]> Signed-off-by: Håkon Øye Amundsen <[email protected]> Signed-off-by: Ioannis Glaropoulos <[email protected]> Signed-off-by: Johann Fischer <[email protected]> Signed-off-by: Trond Einar Snekvik <[email protected]> Signed-off-by: Torsten Rasmussen <[email protected]> Signed-off-by: Jamie McCrae <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit 4c8e041) (cherry picked from commit 1b0aa58)
To ensure that MCUBoot does not leak keys or other material through memory to non-secure side we clear the memory before jumping to the next image. Signed-off-by: Sigvart Hovland <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> Signed-off-by: Ole Sæther <[email protected]> (cherry picked from commit b8a544d) (cherry picked from commit 7f2386f) (cherry picked from commit 83bc352) Signed-off-by: Robert Lubos <[email protected]>
When mcuboot_secondary is on external flash, the image header cannot dircetly be accessed via secondary_fa->fa_off. Instead the provided function boot_img_hdr() is used now. Additionally a similar issue is present when trying to read the address of the reset handler. For this flash_area_read() is used now. With this patch is possible to have the update partiton mcuboot_secondary on external flash and update a updatable bootloader (mcuboot) in s0 and/or s1. Signed-off-by: Christian Taedcke <[email protected]> Signed-off-by: Ole Sæther <[email protected]> Signed-off-by: Sigvart Hovland <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit 9403865) (cherry picked from commit 5bdac09) Signed-off-by: Robert Lubos <[email protected]>
Fixes path variables to use the proper Zephyr module variables Signed-off-by: Jamie McCrae <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit be3e7c6) (cherry picked from commit d9d3804) Signed-off-by: Robert Lubos <[email protected]>
Fixes a missing PCD define check, an image might have the network core partition layout set but if PCD support is not enabled then it should not assume that PCD support is part of mcuboot. Signed-off-by: Jamie McCrae <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit 5932630) (cherry picked from commit 6024d0a) Signed-off-by: Robert Lubos <[email protected]>
This adds support for using both NSIB and the multi-image configuration in MCUboot. Before this was not possible due to upgradable bootloader support through NSIB was using the `UPDATEABLE_IMAGE_NUMBER` configuration to update the updateable bootloader. In this commit we change from using `FLASH_AREA_IMAGE_PRIMARY` to get the flash area ID to using the bootloader state where we set the flash area ID of the free updatable bootloader slot if the image is intended for this slot. Ref. NCSDK-19223 Ref. NCSDK-23305 Signed-off-by: Sigvart Hovland <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit 03af90f) (cherry picked from commit 0d43674) (cherry picked from commit b4464ad) Signed-off-by: Robert Lubos <[email protected]>
Making sysflash.h and pm_sysflash.h more readable. Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit c3b33eb) (cherry picked from commit 418b6fe) Signed-off-by: Robert Lubos <[email protected]>
The commit modifies pm_sysflash.h to add support for three application images. Ref. NCSDK-19223 Signed-off-by: Dominik Ermel <[email protected]> Signed-off-by: Sigvart Hovland <[email protected]> (cherry picked from commit 77c7e25) (cherry picked from commit d700515) (cherry picked from commit 7b87633) Signed-off-by: Robert Lubos <[email protected]>
The XIP image, 2, does not have reset vector. Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit 30181d8) (cherry picked from commit 8e373cc) Signed-off-by: Robert Lubos <[email protected]>
Puts the flash simulation configurtion into cache variables that can be used by other applications and CMake code to know specifics on the simulated flash details Signed-off-by: Jamie McCrae <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit c19337f) (cherry picked from commit 90a91e0) Signed-off-by: Robert Lubos <[email protected]>
This removes the `return;` to ensure that the application is booted even if EXT_ABI is not provided to the application because it does not include `FW_INFO`. Added a bit more description to the error messages when FW_INFO is not found and EXT_ABI is not able to be provided to the next image. Ref. NCSDK-24132 Signed-off-by: Sigvart Hovland <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit e6e72a0) (cherry picked from commit 4b36f9f) Signed-off-by: Robert Lubos <[email protected]>
For nRF53, the only existing version number metadata is stored in the `firmware_info` structure in the network core. This utilizes PCD to read out the version number and compares it against the version number found in the secondary slot for the network core. Ref. NCSDK-21379 Signed-off-by: Sigvart Hovland <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit 4441695) (cherry picked from commit c5aadd7) Signed-off-by: Robert Lubos <[email protected]>
Added procedure which clean-up content of all the secondary slot which contains valid header but couldn't be assigned to any of supported primary images. This behavior is needed when configuration allows to use one secondary slot for collecting image for multiple primary slots. Signed-off-by: Andrzej Puzdrowski <[email protected]> (cherry picked from commit ed3a0c2) Signed-off-by: Robert Lubos <[email protected]>
Change disables GPIO interrupt support in Zephyr GPIO driver, which is not obligatory for MCUboot. This is needed to reduce memory footprint. Signed-off-by: Nikodem Kastelik <[email protected]> Signed-off-by: Dominik Ermel <[email protected]> (cherry picked from commit 69805fa) (cherry picked from commit 8bb8567) Signed-off-by: Robert Lubos <[email protected]>
This patch disbales MCUBoot logging and enables serial recovery for the Thingy:91. Signed-off-by: Maximilian Deubel <[email protected]> Signed-off-by: Bernt Johan Damslora <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.