i3.config

# i3 config file (v4)
#
# Please see http://i3wm.org/docs/userguide.html for a complete reference!
#
# This config file uses keycodes (bindsym) and was written for the QWERTY
# layout.
#
# To get a config file with the same key positions, but for your current
# layout, use the i3-config-wizard
#

# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
# font pango:monospace 8
# font pango:cousine 9
font xft:cousine 10

# This font is widely installed, provides lots of unicode glyphs, right-to-left
# text rendering and scalability on retina/hidpi displays (thanks to pango).
#font pango:DejaVu Sans Mono 8

# Before i3 v4.8, we used to recommend this one as the default:
# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
# The font above is very space-efficient, that is, it looks good, sharp and
# clear in small sizes. However, its unicode glyph coverage is limited, the old
# X core fonts rendering does not support right-to-left and this being a bitmap
# font, it doesn’t scale on retina/hidpi displays.

# use these keys for focus, movement, and resize directions when reaching for
# the arrows is not convenient
# set $up l
# set $down k
# set $left j
# set $right semicolon

set $up k
set $down j
set $left h
set $right l
# use Mouse+Mod1 to drag floating windows to their wanted position
floating_modifier Mod1

# start a terminal
# bindsym Mod1+Return exec dbus-launch gnome-terminal
# bindsym Mod1+Return exec gnome-terminal
bindsym Mod1+Return exec termite
bindsym Mod1+P exec dbus-launch gnome-control-center
#bindsym Mod1+Return exec xterm

# kill focused window
bindsym Mod1+Shift+q kill

# start dmenu (a program launcher)
bindsym Mod1+d exec rofi -show run
# bindsym Mod1+d exec dmenu_run
# There also is the (new) i3-dmenu-desktop which only displays applications
# shipping a .desktop file. It is a wrapper around dmenu, so you need that
# installed.
# bindsym Mod1+d exec --no-startup-id i3-dmenu-desktop

# change focus
bindsym Mod1+$left focus left
bindsym Mod1+$down focus down
bindsym Mod1+$up focus up
bindsym Mod1+$right focus right

# alternatively, you can use the cursor keys:
bindsym Mod1+Left focus left
bindsym Mod1+Down focus down
bindsym Mod1+Up focus up
bindsym Mod1+Right focus right

# move focused window
bindsym Mod1+Shift+$left move left
bindsym Mod1+Shift+$down move down
bindsym Mod1+Shift+$up move up
bindsym Mod1+Shift+$right move right

# alternatively, you can use the cursor keys:
bindsym Mod1+Shift+Left move left
bindsym Mod1+Shift+Down move down
bindsym Mod1+Shift+Up move up
bindsym Mod1+Shift+Right move right

# split in horizontal orientation
# bindsym Mod1+h split h
bindsym Mod1+shift+v split h

# split in vertical orientation
bindsym Mod1+v split v

# enter fullscreen mode for the focused container
bindsym Mod1+f fullscreen toggle

# change container layout (stacked, tabbed, toggle split)
bindsym Mod1+s layout tabbed
# bindsym Mod1+w layout tabbed
bindsym Mod1+e layout toggle split

# toggle tiling / floating
bindsym Mod1+Shift+space floating toggle

# change focus between tiling / floating windows
bindsym Mod1+space focus mode_toggle

# focus the parent container
bindsym Mod1+a focus parent

# focus the child container
#bindsym Mod1+d focus child

# move the currently focused window to the scratchpad
bindsym Mod1+Shift+minus move scratchpad

# Show the next scratchpad window or hide the focused scratchpad window.
# If there are multiple scratchpad windows, this command cycles through them.
bindsym Mod1+minus scratchpad show

bindsym Mod1+c exec "i3-msg 'floating toggle; sticky toggle; resize shrink width 10000px; resize grow width 425px; resize shrink height 10000px; resize grow height 265px;move position 920px 10px;'"

bindsym Mod1+g exec "i3-msg 'border pixel 0;'"
bindsym Mod1+Shift+p exec --no-startup-id "i3-msg 'workspace 9; exec /usr/bin/spotify'"

bindsym Mod1+q exec i3lock-fancy

# switch to workspace
bindsym Mod1+1 workspace 1
bindsym Mod1+2 workspace 2
bindsym Mod1+3 workspace 3
bindsym Mod1+4 workspace 4
bindsym Mod1+5 workspace 5
bindsym Mod1+6 workspace 6
bindsym Mod1+7 workspace 7
bindsym Mod1+8 workspace 8
bindsym Mod1+9 workspace 9
bindsym Mod1+0 workspace 10

# move focused container to workspace
bindsym Mod1+Shift+1 move container to workspace 1
bindsym Mod1+Shift+2 move container to workspace 2
bindsym Mod1+Shift+3 move container to workspace 3
bindsym Mod1+Shift+4 move container to workspace 4
bindsym Mod1+Shift+5 move container to workspace 5
bindsym Mod1+Shift+6 move container to workspace 6
bindsym Mod1+Shift+7 move container to workspace 7
bindsym Mod1+Shift+8 move container to workspace 8
bindsym Mod1+Shift+9 move container to workspace 9
bindsym Mod1+Shift+0 move container to workspace 10

# reload the configuration file
bindsym Mod1+Shift+c reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym Mod1+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym Mod1+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"

# resize window (you can also use the mouse for that)
mode "resize" {
        # These bindings trigger as soon as you enter the resize mode

        # Pressing left will shrink the window’s width.
        # Pressing right will grow the window’s width.
        # Pressing up will shrink the window’s height.
        # Pressing down will grow the window’s height.
        bindsym $left       resize shrink width 10 px or 10 ppt
        bindsym $down       resize grow height 10 px or 10 ppt
        bindsym $up         resize shrink height 10 px or 10 ppt
        bindsym $right      resize grow width 10 px or 10 ppt

        # same bindings, but for the arrow keys
        bindsym Left        resize shrink width 10 px or 10 ppt
        bindsym Down        resize grow height 10 px or 10 ppt
        bindsym Up          resize shrink height 10 px or 10 ppt
        bindsym Right       resize grow width 10 px or 10 ppt

        # back to normal: Enter or Escape
        bindsym Return mode "default"
        bindsym Escape mode "default"
}

bindsym Mod1+r mode "resize"

# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)
#bar {
        #status_command i3status
        #status_command polybar
#        status_command py3status
#}
exec_always --no-startup-id $HOME/.config/polybar/launch.sh
#bar {
    # status_command    python3 ~/.i3/i3.py
    #status_command   py3status -c ~/.i3/i3status.conf
#    position          top
    #workspace_buttons yes
#}

#The "smart" setting hides borders on workspaces with only one window visible,
#but keeps them on workspaces with multiple windows visible
hide_edge_borders smart

#This configuration directive enables automatic workspace back_and_forth (see
#[back_and_forth]) when switching to the workspace that is currently focused.
workspace_auto_back_and_forth yes

# Pulse Audio controls
bindsym XF86AudioRaiseVolume exec --no-startup-id pactl set-sink-volume 0 +5% #increase sound volume
bindsym XF86AudioLowerVolume exec --no-startup-id pactl set-sink-volume 0 -5% #decrease sound volume
bindsym XF86AudioMute exec --no-startup-id pactl set-sink-mute 1 toggle # mute sound

# Media player controls
bindsym XF86AudioPlay exec mpc toggle
bindsym XF86AudioNext exec mpc next
bindsym XF86AudioPrev exec mpc prev
bindsym XF86AudioStop exec mpc stop

bindsym Mod1+shift+a exec alsamixer