Replies: 5 comments 4 replies
-
|
The 'Simple content access (SCA) is not enabled' alert has re-appeared in this version and for some reason cannot be silenced on my cluster. |
Beta Was this translation helpful? Give feedback.
-
|
Seems like this issue is still present in this release. Operators can't be installed via OperatorHub. The subscription get stuck in status "Unknown failure".
The logs from namespace I fixed it by just deleting the job and after the operator installed successfully. I also had to delete several rolebindings for a couple of operators in the kube-system namespace. |
Beta Was this translation helpful? Give feedback.
-
|
Is this stream will not update any more? should I change to scos stream? |
Beta Was this translation helpful? Give feedback.
-
|
Yes, you should switch to SCOS, link to the OKD Working group Statement! |
Beta Was this translation helpful? Give feedback.
-
|
Thank for your reply, my version is 4.15.0-0.okd-2024-03-10-010116, which version should upgrade to? |
Beta Was this translation helpful? Give feedback.
-
|
Beta Was this translation helpful? Give feedback.
-
|
@vrutkovs kindly your support 3 master nodes When I attempt to telnet to port 443: It works on the active nodes as seen by the F5. |
Beta Was this translation helpful? Give feedback.
-
|
That‘s easy, you only have those ports open where ingress pods are running. You can modify this by the patching the ingress controller. I normally declare a role and patching the labels, … |
Beta Was this translation helpful? Give feedback.
-
|
@ahmedalazazy Please do not tag individuals for support. OKD is community-supported distribution. Anyone and everyone should be encouraged to chip in. Tangentially, Vadim is no longer affiliated with OKD. As mentioned in the issue you opened, we have a new version of OKD coming that is SCOS based. Please open a separate community discussion item so that folks can chip in with advice on your issue. |
Beta Was this translation helpful? Give feedback.
-
Client tools for OpenShift
These archives contain the client tooling for OpenShift.
To verify the contents of this directory, use the 'gpg' and 'shasum' tools to
ensure the archives you have downloaded match those published from this location.
The openshift-install binary has been preconfigured to install the following release:
This discussion was created from the release 4.15.0-0.okd-2024-03-10-010116.
Beta Was this translation helpful? Give feedback.
All reactions