Virtual input API to activate for 5 seconds then to deactivate automatically - how to do so on AXIS 9188? #169
-
Hello AXIS , for the first time, we will use AXIS A9188 NETWORK I/O RELAY MODULE. To control the each relay port on the AXIS 9188, we are now using Virtual input API . ACTIVATE DE-ACTIVATE The ISSUE is that we do not know how to deactivate automatically Although the AXIS event has auto-reverse mechanism to change activate status to deactivate status on the target relay port (say Relay port 10 ), however virtual port status is still 'active'. so that next virtualinput activate command fails. In sum we see status mismatch between AXIS event mechanism and virtual input status.
|
Beta Was this translation helpful? Give feedback.
Replies: 3 comments 4 replies
-
Hi @naokibizen. Given that this possibly is specific to a certain product I would like you to open an issue in the technical support helpdesk. |
Beta Was this translation helpful? Give feedback.
-
@naokibizen you may need to make an ACAP utility to accomplish this. |
Beta Was this translation helpful? Give feedback.
-
Thank you for your advice @mattias-kindborg-at-work , @onie5 !! This is just another ordinary site to used AXIS9188 and Elevator Relay On/Off, not a special site.We thought we can Relay On and Relay off by some scrip ( VAPIX ) at least we can run a virtual port deactivate command every 30 seconds. We are very new to ACAP utility. We want to try if it is scrip base application development... |
Beta Was this translation helpful? Give feedback.
Thank you for your advice @mattias-kindborg-at-work , @onie5 !!
This is just another ordinary site to used AXIS9188 and Elevator Relay On/Off, not a special site.We thought we can Relay On and Relay off by some scrip ( VAPIX ) at least we can run a virtual port deactivate command every 30 seconds.
We are very new to ACAP utility. We want to try if it is scrip base application development...