Firmware update 10.12.114 appears to break ONVIF ContinuousMove

[xtrdustin]

We're having some trouble with the ContinousMove command, which seems to be caused by the firmware upgrade:

• We were previously on version 9.80.2.2, and sending ONVIF ContinousMove commands, which were working.
• When we upgraded to version "10.12.114 - AXIS OS LTS 2022", we started getting error 400 in response to the ContinuousMove commands.
• When we reverted back to the old version, we were no longer seeing the errors.

Was there a change in what the ContinuousMove command accepts, and/or something else we need to do for it to work on the new version?

The camera is an AXIS Q6215-LE PTZ Network Camera.

Thanks in advance!

[xtrdustin]

Did another test to verify that it wasn't just the restart after reverting that fixed it. Upgraded again to 10.12.114. ContinuousMove commands caused errors. Restarted. Still errors. Reverted again to 9.80.2.2: ContinuousMove returned no errors.

[mattias-kindborg-at-work]

Hi @xtrdustin. We are having trouble reproducing this. Could you please provide us with a complete sample we can run to showcase the issue?

[mattias-kindborg-at-work]

Add them to a privat GitHub repository and invite me with read privileges.

[xtrdustin]

Okay, I added it to https://github.com/xtrdustin/axis-uploads/

[mattias-kindborg-at-work]

It seems that current implementation do not support parsing of xs:durations with years and months specified (for example P0Y0M0DT0H0M1.000S), prefer to specify the timeout as PT60S instead.

[xtrdustin]

It turns out we don't really need the duration parameter, and were able to upgrade to firmware 11.1.65.

However, this caused our "metadata" media profile to be deleted, and we had to re-create it.