Error after setting MQTT client-proxy mode

[psteckler]

After toggling on client-proxy mode for MQTT, and sending the new config to my radio, I get a Java exception related to URI syntax. I've attached a screen shot of the error.

Once client-proxy mode is set, I see the error every time I send a config to the radio and the radio reboot.

[madeofstown]

Looks like you might need to check the address of the server. Did you put a # or ? in the address field?

[psteckler]

No, the address is just mqtt.meshtastic.org.

[madeofstown]

What's the root topic? What hardware are you using for the node and what firmware version is it on? Also, what version of the app are you using?

[psteckler]

The root topic is msh. And the last time that I enabled client-proxy mode, I did not get the error.

I believe the root topic had been msh/US. I didn't set it, myself, something caused it to change in the settings.

[psteckler]

I had to re-enter my config, the root topic is again msh/US. But now the error does not occur. Seems like there were stray characters somewhere in a buffer that were not visible in the settings, and those characters have been flushed. Something like that.

Hardware is RAK WisBlock 4631, firmware is 2.5.18, app version is 2.5.16.

[psteckler]

I'm seeing lots of nodes via MQTT now, all good here.