Icicle board default binaries (uboot/Linux + HSS)

[kowalski100]

Hi,

The Icicle board has default u-boot version 2020.01. The .wic images shared on this repo contains later version.

Is there a link pointing to default versions binaries (uboot, linux + supported HSS .jobs files)?

[vfalanis]

Hi,

The following binaries/assets can be downloaded from our repos:

1. Pre-built WIC images per release from the release page
2. Job files per release from the Icicle Kit reference design release page

If required, it is possible to extract the U-boot and a fitImage (Linux + DTB) from a WIC image from a particular release. For an example on how to extract U-Boot from a WIC file please refer to this link

The table below contains the versions of the binaries used in some of our most recent releases:

PolarFire SoC Yocto Release	U-Boot	Linux	HSS	Reference Design
v2021.11	2021.07	5.12.19	v0.99.26	v2021.11
v2021.08	2021.04	5.12.1	v0.99.23	v2021.08
v2021.04	2020.1	5.6.18	v0.99.16	v2021.04
v2021.02	2020.1	5.6.18	v0.99.15	v2021.02
v2020.11	2020.07	5.3.18	v0.99.14	v2020.11

[kowalski100]

Hi,

None of the above mentioned releases contains default images on the icicle board. As I mentioned in the thread, the default u-boot version prints 2020.01. We want the board to get back to default state and for that default binaries are needed.

[vfalanis]

Hi,

You can get the default Icicle Kit image and HSS job file from this link.