Failed to boot from Teslaandroid image from USB SSD

[Get-108]

Hello!
Failed to load boot.scr error after starting booting.
– USB boot is activated, EEPROM and bootloader are up to date.
– Tried: write image via raspberry imager, etcher, copying from working SD via dd command.
Nothing works.

Booting from SD is ok.
What i do wrong? Thank you for any advice.

[mikegapinski]

USB boot is not supported

[apple2ms]

Is there any updated instructions on how to do that with the nvme ?

[mikegapinski]

Is there any updated instructions on how to do that with the nvme ?

Nvme on the CM4?

[apple2ms]

No, the pi4. I saw you are now offering one with nvme and I was wondering what kind of hardware it uses, assumed pi4 with usb nvme

[mikegapinski]

NVMe via USB is not the same as NVMe via PCIe on the CM4. It is not supported, completely different boot method Od: apple2ms ***@***.***> Data: poniedziałek, 23 października 2023 o 19:52 Do: tesla-android/issue-tracker ***@***.***> DW: Michał Gapiński ***@***.***>, Comment ***@***.***> Temat: Re: [tesla-android/issue-tracker] Failed to boot from Teslaandroid image from USB SSD (Discussion #288) No, the pi4. I saw you are now offering one with nvme and I was wondering what kind of hardware it uses, assumed pi4 with usb nvme — Reply to this email directly, view it on GitHub<#288 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AAHDCB3LNWUOTFZVZLQMKTDYA2VGHAVCNFSM6AAAAAA3Q6WZN2VHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TGNRRHAZDA>. You are receiving this because you commented.Message ID: ***@***.***>