Reference point for offsets

[rhig2000]

VABS output includes the following section titles:

1. The Mass Center of the Cross Section
2. The Geometric Center of the Cross Section
3. The Tension Center of the Cross Section
4. The Shear Center of the Cross Section in the User Coordinate System

The reference point for the Shear Center is declared as the user coordinate system. What is the reference point for the other offsets?

[wenbinyu-PU]

should all be with respect to the user coordinate system. I will make it consistent in new release.

[rhig2000]

Thanks, Wenbin. Are you saying you will make the section titles consistent in the new release? Just to clarify, in current release, even though section titles are not consistent, the reference point for all the offsets is the same - the user coordinate system. Please confirm.

[wenbinyu-PU]

Yes. From: rhig2000 ***@***.***> Sent: Friday, January 10, 2025 11:12 AM To: wenbinyugroup/.github ***@***.***> Cc: Yu, Wenbin ***@***.***>; Comment ***@***.***> Subject: Re: [wenbinyugroup/.github] Reference point for offsets (Discussion #45)

…

---- External Email: Use caution with attachments, links, or sharing data ---- Thanks, Wenbin. Are you saying you will make the section titles consistent in the new release? Just to clarify, in current release, even though section titles are not consistent, the reference point for all the offsets is the same - the user coordinate system. Please confirm. - Reply to this email directly, view it on GitHub<#45 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/ASUPJ6MVZFK7FBRK2NPIE4L2J7WOJAVCNFSM6AAAAABU4XBNRKVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCNZZHE4TSNY>. You are receiving this because you commented.Message ID: ***@***.******@***.***>>

[rhig2000]

Ok, good. The reference point for all the offsets is the same - the user coordinate system.