-
Notifications
You must be signed in to change notification settings - Fork 15
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
fail to add br0 with ovs-vsctl: "No column p4 in table Bridge." #8
Comments
Hi, please make sure you use a correct version of ovsdb (compiled from the P4-OvS repository). The output of |
thank you, I reinstall ovs with version 2.13.0, no WARN anymore. However, I face the same issue that is similar to the first question in #9 user@user-VirtualBox ~/p/P4-OvS>
sudo ovs-vsctl add-br br0 -- set bridge br0 datapath_type=ubpf p4=true
^C2021-05-07T06:29:12Z|00002|fatal_signal|WARN|terminating with signal 2 (Interrupt) The output stucked and I wait for a long time without any response. |
I follow https://github.com/osinstom/P4-OvS/blob/p4/Documentation/intro/install/general.rst to install ovs git clone https://github.com/openvswitch/ovs.git
git checkout v2.13.0
./boot.sh
./configure --prefix=/usr
make
sudo make install but when I run user@user-VirtualBox ~/p/P4-OvS> sudo ovs-vsctl show
96c7683c-52cf-46e0-bd6d-709b2f37bf5c
Bridge br0
p4: true
datapath_type: ubpf
Port br0
Interface br0
type: internal
ovs_version: "2.14.90" Seems that the ovs version is not 2.13.0 but 2.14.90. Are there some steps that I miss? |
I have the same problem. Have you solved it now? |
@wangshuai199398 nop |
I am also facing the same issue, I am using the 2.17.7 ovs_version |
hello, I follow the demo but the output is different, and
br0
is failed to add.which is different from
$ ovs-vsctl add-br br0 -- set bridge br0 datapath_type=ubpf p4=true
The text was updated successfully, but these errors were encountered: