dist-docs: Update OVN main manpages

src/static/support/dist-docs/ovn-nb.5

@@ -1088,6 +1088,9 @@ optional string
 .TQ 2.50in
 \fBoptions : hostname\fR
 optional string
+.TQ 2.50in
+\fBoptions : pkt_clone_type\fR
+optional string, must be \fBmc_unknown\fR
 .TQ .25in
 \fIVIF Plugging Options:\fR
 .RS .25in
@@ -1342,6 +1345,8 @@ If set, indicates the maximum rate for data sent from this interface, in bit/s\[
 If set, indicates the maximum burst size for data sent from this interface, in bits\[char46]
 .IP "\fBoptions : hostname\fR: optional string"
 If set, indicates the DHCPv4 option \(dqHostname\(dq (option code 12) associated for this Logical Switch Port\[char46] If DHCPv4 is enabled for this Logical Switch Port, hostname dhcp option will be included in DHCP reply\[char46]
+.IP "\fBoptions : pkt_clone_type\fR: optional string, must be \fBmc_unknown\fR"
+If set to mc_unknown, packets going to this VIF get cloned to all unknown ports connected to the same Logical Switch\[char46]
 .ST "VIF Plugging Options:"
 .PP
 .IP "\fBoptions : vif-plug-type\fR: optional string"

src/static/support/dist-docs/ovn-northd.8

@@ -739,7 +739,7 @@ Priority\-50 flows that match ARP requests to each known IP address \fIA\fR of e
 .fi
 .IP
 These flows are omitted for logical ports (other than router ports or \fBlocalport\fR ports) that are down (unless \fB
-ignore_lsp_down\fR is configured as true in \fBoptions\fR column of \fBNB_Global\fR table of the \fBNorthbound\fR database), for logical ports of type \fBvirtual\fR, for logical ports with \(cqunknown\(cq address set and for logical ports of a logical switch configured with \fBother_config:vlan\-passthru=true\fR\[char46]
+ignore_lsp_down\fR is configured as true in \fBoptions\fR column of \fBNB_Global\fR table of the \fBNorthbound\fR database), for logical ports of type \fBvirtual\fR, for logical ports with \(cqunknown\(cq address set, for logical ports with the \fBoptions:disable_arp_nd_rsp=true\fR and for logical ports of a logical switch configured with \fBother_config:vlan\-passthru=true\fR\[char46]
 .IP
 The above ARP responder flows are added for the list of IPv4 addresses if defined in \fBoptions:arp_proxy\fR column of \fBLogical_Switch_Port\fR table for logical switch ports of type \fBrouter\fR\[char46]
 .IP \(bu
@@ -1100,7 +1100,7 @@ A priority\-72 flow that outputs all ARP requests and ND packets with an Etherne
 .IP \(bu
 A priority\-70 flow that outputs all packets with an Ethernet broadcast or multicast \fBeth\[char46]dst\fR to the \fBMC_FLOOD\fR multicast group\[char46]
 .IP \(bu
-One priority\-50 flow that matches each known Ethernet address against \fBeth\[char46]dst\fR\[char46] Action of this flow outputs the packet to the single associated output port if it is enabled\[char46] \fBdrop;\fR action is applied if LSP is disabled\[char46]
+One priority\-50 flow that matches each known Ethernet address against \fBeth\[char46]dst\fR\[char46] Action of this flow outputs the packet to the single associated output port if it is enabled\[char46] \fBdrop;\fR action is applied if LSP is disabled\[char46] If the logical switch port of type VIF has the option \fBoptions:pkt_clone_type\fR is set to the value \fBmc_unknown\fR, then the packet is also forwarded to the \fBMC_UNKNOWN\fR multicast group\[char46]
 .IP
 For the Ethernet address on a logical switch port of type \fBrouter\fR, when that logical switch port\(cqs \fBaddresses\fR column is set to \fBrouter\fR and the connected logical router port has a gateway chassis:
 .RS

src/static/support/dist-docs/ovn-northd.8.html

@@ -1251,8 +1251,10 @@
                      <b>i</b><b>g</b><b>n</b><b>o</b><b>r</b><b>e</b><b>_</b><b>l</b><b>s</b><b>p</b><b>_</b><b>d</b><b>o</b><b>w</b><b>n</b> is configured as true in  <b>o</b><b>p</b><b>t</b><b>i</b><b>o</b><b>n</b><b>s</b>  column
                      of <b>N</b><b>B</b><b>_</b><b>G</b><b>l</b><b>o</b><b>b</b><b>a</b><b>l</b> table of the <b>N</b><b>o</b><b>r</b><b>t</b><b>h</b><b>b</b><b>o</b><b>u</b><b>n</b><b>d</b> database), for logi‐
                      cal  ports  of  type <b>v</b><b>i</b><b>r</b><b>t</b><b>u</b><b>a</b><b>l</b>, for logical ports with ’un‐
-                     known’ address set and for logical  ports  of  a  logical
-                     switch configured with <b>o</b><b>t</b><b>h</b><b>e</b><b>r</b><b>_</b><b>c</b><b>o</b><b>n</b><b>f</b><b>i</b><b>g</b><b>:</b><b>v</b><b>l</b><b>a</b><b>n</b><b>-</b><b>p</b><b>a</b><b>s</b><b>s</b><b>t</b><b>h</b><b>r</b><b>u</b><b>=</b><b>t</b><b>r</b><b>u</b><b>e</b>.
+                     known’ address  set,  for  logical  ports  with  the  <b>o</b><b>p</b>‐‐
+                     <b>t</b><b>i</b><b>o</b><b>n</b><b>s</b><b>:</b><b>d</b><b>i</b><b>s</b><b>a</b><b>b</b><b>l</b><b>e</b><b>_</b><b>a</b><b>r</b><b>p</b><b>_</b><b>n</b><b>d</b><b>_</b><b>r</b><b>s</b><b>p</b><b>=</b><b>t</b><b>r</b><b>u</b><b>e</b>  and for logical ports of a
+                     logical     switch     configured     with     <b>o</b><b>t</b><b>h</b><b>e</b><b>r</b><b>_</b><b>c</b><b>o</b><b>n</b>‐‐
+                     <b>f</b><b>i</b><b>g</b><b>:</b><b>v</b><b>l</b><b>a</b><b>n</b><b>-</b><b>p</b><b>a</b><b>s</b><b>s</b><b>t</b><b>h</b><b>r</b><b>u</b><b>=</b><b>t</b><b>r</b><b>u</b><b>e</b>.
 
                      The  above  ARP responder flows are added for the list of
                      IPv4 addresses if defined in <b>o</b><b>p</b><b>t</b><b>i</b><b>o</b><b>n</b><b>s</b><b>:</b><b>a</b><b>r</b><b>p</b><b>_</b><b>p</b><b>r</b><b>o</b><b>x</b><b>y</b> column  of
@@ -1644,7 +1646,11 @@
               •      One priority-50 flow that matches each known Ethernet ad‐
                      dress against <b>e</b><b>t</b><b>h</b><b>.</b><b>d</b><b>s</b><b>t</b>. Action of this  flow  outputs  the
                      packet  to the single associated output port if it is en‐
-                     abled. <b>d</b><b>r</b><b>o</b><b>p</b><b>;</b> action is applied if LSP is disabled.
+                     abled. <b>d</b><b>r</b><b>o</b><b>p</b><b>;</b> action is applied if LSP is disabled. If the
+                     logical switch port  of  type  VIF  has  the  option  <b>o</b><b>p</b>‐‐
+                     <b>t</b><b>i</b><b>o</b><b>n</b><b>s</b><b>:</b><b>p</b><b>k</b><b>t</b><b>_</b><b>c</b><b>l</b><b>o</b><b>n</b><b>e</b><b>_</b><b>t</b><b>y</b><b>p</b><b>e</b> is set to the value <b>m</b><b>c</b><b>_</b><b>u</b><b>n</b><b>k</b><b>n</b><b>o</b><b>w</b><b>n</b>, then
+                     the  packet is also forwarded to the <b>M</b><b>C</b><b>_</b><b>U</b><b>N</b><b>K</b><b>N</b><b>O</b><b>W</b><b>N</b> multicast
+                     group.
 
                      For the Ethernet address on a logical switch port of type
                      <b>r</b><b>o</b><b>u</b><b>t</b><b>e</b><b>r</b>, when that logical switch port’s <b>a</b><b>d</b><b>d</b><b>r</b><b>e</b><b>s</b><b>s</b><b>e</b><b>s</b>  column

src/static/support/dist-docs/ovn-northd.8.txt

@@ -1250,8 +1250,10 @@ LOGICAL FLOW TABLE STRUCTURE
                      ignore_lsp_down is configured as true in  options  column
                      of NB_Global table of the Northbound database), for logi‐
                      cal  ports  of  type virtual, for logical ports with ’un‐
-                     known’ address set and for logical  ports  of  a  logical
-                     switch configured with other_config:vlan-passthru=true.
+                     known’ address  set,  for  logical  ports  with  the  op�‐
+                     tions:disable_arp_nd_rsp=true  and for logical ports of a
+                     logical     switch     configured     with     other_con�‐
+                     fig:vlan-passthru=true.
 
                      The  above  ARP responder flows are added for the list of
                      IPv4 addresses if defined in options:arp_proxy column  of
@@ -1643,7 +1645,11 @@ LOGICAL FLOW TABLE STRUCTURE
               •      One priority-50 flow that matches each known Ethernet ad‐
                      dress against eth.dst. Action of this  flow  outputs  the
                      packet  to the single associated output port if it is en‐
-                     abled. drop; action is applied if LSP is disabled.
+                     abled. drop; action is applied if LSP is disabled. If the
+                     logical switch port  of  type  VIF  has  the  option  op�‐
+                     tions:pkt_clone_type is set to the value mc_unknown, then
+                     the  packet is also forwarded to the MC_UNKNOWN multicast
+                     group.
 
                      For the Ethernet address on a logical switch port of type
                      router, when that logical switch port’s addresses  column

src/static/support/dist-docs/ovn-sb.5

@@ -3225,7 +3225,7 @@ The chassis that inserted this record\[char46] This column is used for RBAC purp
 .PP
 .PP
 .PP
-Each row in this table configures monitoring a service for its liveness\[char46] The service can be an IPv4 TCP or UDP service\[char46] \fBovn\-controller\fR periodically sends out service monitor packets and updates the status of the service\[char46] Service monitoring for IPv6 services is not supported\[char46]
+Each row in this table configures monitoring a service for its liveness\[char46] The service can be an IPv4 TCP or UDP service\[char46] \fBovn\-controller\fR periodically sends out service monitor packets and updates the status of the service\[char46]
 .PP
 .PP
 \fBovn\-northd\fR uses this feature to implement the load balancer health check feature offered to the CMS through the northbound database\[char46]
@@ -3298,7 +3298,7 @@ The VIF of the logical port on which the service is running\[char46] The \fBovn\
 .IP "\fBsrc_mac\fR: string"
 Source Ethernet address to use in the service monitor packet\[char46]
 .IP "\fBsrc_ip\fR: string"
-Source IPv4 address to use in the service monitor packet\[char46]
+Source IPv4 or IPv6 address to use in the service monitor packet\[char46]
 .IP "\fBchassis_name\fR: string"
 The name of the chassis where the logical port is bound\[char46]
 .IP "\fBoptions : interval\fR: optional string, containing an integer"