Open
Description
Currently, oxide hardware switch-port show-status has a section for Receiver Power under each switch, but it doesn't list the port name for those rows.
✕ treyaspelund@Tallon-IV 12:30:42 PM | ~/Downloads
‣ ./oxide --profile colo-admin system hardware switch-port show-status
switch0
=======
[snip]
Receiver Power Transmitter Bias Current Transmitter Power
[Average(1.3845), Average(1.2108), Average(1.1593), Average(1.0652)] [47.88, 48.45, 47.88, 47.88] [0.76060003, 0.6331, 0.86630005, 1.1315]
[Average(1.5959), Average(1.1918), Average(1.0427), Average(1.2492)] [43.522, 43.276, 43.866, 43.658] [1.51, 1.4474, 1.6165999, 1.8414]
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
[Average(1.2421), Average(0.9875001), Average(0.89040005), Average(1.0207)] [47.88, 47.88, 47.88, 47.88] [1.0199, 0.8388, 1.0103, 1.055]
- - -
[snip]
There needs to be a way to visually correlate each row back to a port name, e.g. by adding a Port Name column to this section.