Servo is not working properly with SLT2

[AlexGigov]

Hello,
I have a strange servo behaviour on Losi Micro-B using Radiomaster Mt12 with an external Radiomaster 4in1 module with 1.3.4.12 test build firmware. The RX and TX bind together, but the servo is not smooth. The best I can describe it is as if the packet rate is not constant and there are micro cuts during the movement. I do not see a problem with the throttle. So far I have tried to change the inputs, frequency tuning and tested with different channel order but the issue persists.
With the original Spectrum SLT2 TX everything works smoothly.

Any idea what could solve the issue?

Thanks

[Pencilvestr]

I think someone needs to send in an SLT2 RX/TX to fix these issues.

You can look at the original post I made for SLT2. I think its as good as it gets for the time being until someone donates