-
Notifications
You must be signed in to change notification settings - Fork 661
Moto G6 Play
Any GSI that is ARM A-Only should boot, but full compatibility isn't guaranteed
If you are flashing an Android 10 GSI: make sure you don't have Magisk installed, as it will cause bootloops
Note: Boot animations don't work on some models. While booting, it might only show the bootloader logo ("bad key" or "N/A" screen)
Be patient, the first boot will take a while
- Decryption is not required, but it's recommended
- Follow this guide for up-to-date instructions: [guide] [root] [oreo&pie] [jeter/aljeter] [twrp, decrypt, magisk] [stock firmware]
- If your phone is running Pie, you will need to use TWRP built for the 16GB model, even if you have the 32GB model
- This thread contains a list of tested GSI ROMs: ROMs that run on the G6 Play [GSI]
- Flash the image with the
fastbootutility:$ fastboot flash system system-arm-aonly.img - As an alternative you can flash via TWRP as System Image
| Component | Comment |
|---|---|
| Camera | Works |
| Speaker / Mic | Works |
| Bluetooth | Has issues with audio |
| WiFi | Works |
| SIM / Mobile Data / Voice | Works (Tested with Boost Mobile, APNs may need to be added manually) |
| VoLTE | Untested |
| Fingerprint | Works |
| Offline Charging | Works |
| Component | Comment |
|---|---|
| Camera | Works |
| Speaker / Mic | Works |
| Bluetooth | Has issues with audio |
| WiFi | Works |
| SIM / Mobile Data / Voice | Works (Tested with Boost Mobile, APNs may need to be added manually) |
| VoLTE | Untested |
| Fingerprint | Works |
| Offline Charging | Works |
Motorola stock ROMs are available here for aljeter, and here for jeter. Make sure you use the correct ROM for your model, otherwise you may run into weird issues.
Pie: tested by @ry755 - XT1922-7 (jeter, US), Pie vendor, tested on 10/9/19 with AOSP v119
10/Q: tested by @ry755 - XT1922-7 (jeter, US), Pie vendor, tested on 12/2/19 with AOSP v204
Using a wiki template created by @zguithues and @hackintosh5